Over 1 million tech questions and answers.

No video output on HDMI after video driver update

Q: No video output on HDMI after video driver update

So I recently decided to update my graphics for the new Battlefront and got a pop up from Catalyst Control asking if I wanted to activate some 'super high' setting for my Toshiba 32BV702B 32" tv. I foolishly clicked okay and now my tv won't display any video.

I'm not sure where to go to turn that setting off but I can get back my video by plugging in a DVI output at the same time. I just use this extra monitor for when stuff breaks cause the BIOS options don't show on HDMI output - right now it's allowing the TV to display the picture but if I remove that cable the video goes again. I'm guessing it's a different video profile when they're both plugged in from when they aren't or something and I don't know how to make changes to just the TV when both are plugged in for me to be able to see.

Any help would be much appreciated.
Kind regards,
Nick

Extra info:
AMD Radeon HD 7800 4gb card
Windows 7 Ultimate 64bit
TV Resolution, when DVI plugged in: 1920 x 1080 32-bit 30hz - Generic PnP Monitor

If you need any further info about my setup just let me know and I'll try to provide it asap.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: No video output on HDMI after video driver update

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 92

I have had my Thinkpad connected to a Samsung TV via HDMI cable (through a Thinkpad dock) for months with no problems. After the latest Lenovo updates (see attached screenshot file) my Thinkpad intermittently fails to recognize the Samsung TV as an audio output... it does not register as an audio device in audio settings nor in control panel, yet it does still connect to the TV as a 2nd monitor and video works fine. It seeems to alternate every other time that I boot up the computer. One boot-up it fails to recognize the TV as an audio output, then I'll reboot and it works.

Read other answers
RELEVANCY SCORE 86

Hello! I have a problem.

I have been using my laptop to output to a large, HD (1080i max res) TV via HDMI for some time. I recently replaced my slightly older HP entertainment laptop with an ASUS K52JC-A1 running a 2.4GHz i5 and a Nvidia 310 graphics card, 4GB of RAM. In my research beforehand, I found that the specs should have been equivalent (I believe the HP was running a dual-core Intel around 2.2-2.4GHz and an ATI card of some kind), but since I switched over, I've had nothing but trouble with my HDMI outputting of .mkv x264 video output. I have done exhaustive research on this subject, at least as far as Google and word of mouth can take me, and I can't figure out why.

My precise problem is this: No matter the res, which is usually 720 or 1080 by whatever, but always the mkv container with the x264 codec, I get video choppiness and cutting, some slowing and speeding up, and occasionally pixelation and graphics "merging," where one image continues over another. The latter problems are usually only with 1080 res, which makes me suspect lack of power from either the processor or the graphics card. I figure that any i5 would have no problem with this, but I don't know a ton about the overall performance of the graphics card. I'm smart with this stuff but not too resourceful, so this is where I'm turning. I have been working on this for quite awhile with no improvement.

This only happens when the video is outputting directly to the TV w... Read more

Read other answers
RELEVANCY SCORE 85.2

I need a way to split hdmi output from my cable box to dvi video to my video projector and sound to my amplifier.
 

A:divide hdmi output to video and soud

http://www.gefen.com/kvm/dproduct.jsp?prod_id=3939
 

Read other 1 answers
RELEVANCY SCORE 85.2

I connected the G50 to monitor and it not output any display.  VGA works fine but nothing from the hdmi.

A:G50 will not output video to hdmi connected monito...

Hi A1ci,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with system not able to connect to external monitor through HDMI on your IdeaPad G50.
 

Have you checked with different HDMI cable?
Are you connecting to External monitor or a Televisition?
Please check if the Graphic driver is updated? If not please download the file from the support site and install it.

http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-noteboo...
 
Hope this helps.
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 4 answers
RELEVANCY SCORE 85.2

Just wondered if it's normal for my laptop to output a max of 1280x768 through HDMI to my 26" LCD TV?

Its a Satellite R830 i3 with hd3000 graphics. I have 8GB RAM. Tried under Windows 7 and 8 but the same.
Also tried custom resolution but it just says on the TV out of range.

Mt graphics driver is up to date and I had full hd working on this TV via another older laptop.

Any suggestions please?

A:Satellite R830 and video output through HDMI

I don?t know your LCD TV specifications but fact is that external resolution depends on three options:
graphic card driver, graphic card and the external device connected to notebook/computer.

So if your TV does not support an higher resolution, you will not be able to choose another resolution.
If your TV supports higher resolution but the graphic card driver and graphic chip would not support higher resolution, you will also not be able to use it.

Read other 1 answers
RELEVANCY SCORE 84

Is there any way to upgrade the video/audio card in my lenovo thinkpad W541 with a video/audio card that has an HDMI out?  Also since the HDMI carrys both audio and video is there a way to keep my head phone jack and existing serial plug as well?  It appears that I have a blank cover for an extra auxilary plug, is there an HDMI plug mount that will fit this slot?  I am guessing the USB3 takes the same space as USB2 as far as the slot?
 
Is is also possible to upgrade one of my USB2 slots to a USB3?
 
If this is possible what are the part numbers for the new audio/video cards and can I order them online?
 
My type 20EF-CT01WW S/N xx-xxxxxx  15/05
 
Changed title to match content.  Removed serial per forum rules  richk
 
Thank you,
Ron

A:Tip: How to connect W541 to TV with HDMI that output audio and video

If I'm not mistaken, your W541 has a mini-Displayport connector on the left side, which is for use connecting an external monitor or HDTV.  It provides audio and video to the externally connected display device, same as an HDMI connector would.
 
You simply need to get an inexpensive miniDP->HDMI cable. You don't have to use HDMI->HDMI.  The miniDP->HDMI cable will work exactly the same way as an HDMI->HDMI cable will, with the nVidia drivers controlling audio and video output to your HDTV.
 
I assume your W541 has nVidia Quadro graphics, and this miniDP connector?
 

 

Read other 1 answers
RELEVANCY SCORE 84

Is there any way to upgrade the video/audio card in my lenovo thinkpad W541 with a video/audio card that has an HDMI out?  Also since the HDMI carrys both audio and video is there a way to keep my head phone jack and existing serial plug as well?  It appears that I have a blank cover for an extra auxilary plug, is there an HDMI plug mount that will fit this slot?  I am guessing the USB3 takes the same space as USB2 as far as the slot? Is is also possible to upgrade one of my USB2 slots to a USB3? If this is possible what are the part numbers for the new audio/video cards and can I order them online? My type 20EF-CT01WW S/N R9-0FZKJ7 15/05 Thank you,Ron

Read other answers
RELEVANCY SCORE 84

I decided to remove the screen of my Lenovo Y50 due to it being broken, I was planning to simply plug the computer into my monitor. for this I used an HDMI cable which is the only port avaliable for the pc. However as I plugged the hdmi cable and turned on the computer I recieved no video, however after a long while of moving the cable I was able to see the screen. I changed some settings used it for a while and then shut it off. When I started it later the monitor was giving me once again no signal. as of now I try and try but I still recieve no video signal. Any Ideas?

Read other answers
RELEVANCY SCORE 84

system become unstable when laptop is plug in to HDMI video out with the lid close down.there will be issues like below:- windows become so lag it's not responsive, very slow response to mouse lick for example- even task manager is not working - bottom right taskbar/notification area will have unstable toggle (expand and shrink continuosly) issues above not apply when- laptop is use without HDMI video- HDMI video out without closing the lid

Read other answers
RELEVANCY SCORE 84

HP Laptop Model 15-131wm has now HDMI video output

External monitor works on other laptops but not this one.

Updated drivers and still no output. Did work a month ago then stopped. Running Windows 10 home
 

Read other answers
RELEVANCY SCORE 83.2

Hi,

I just bought a new laptop and it has an hdmi output on it. It is only an average laptop so the graphics card is pretty basic- i think its just the standard intel one.

When i connect my laptop to my 42" lcd screen and run it just off the TV, the video plays fine but about every 10 seconds or so it goes jumpy for a few seconds then back to normal.
however if i connect them and run both screens- the image on the tv is much smaller but plays fine. i'm thinking that when its outputting a larger image- that is causing the slowdown cause my graphics card can't handle it.

is there anyway to produce the 42" image without the slowdown?

thanks for the help

chris
 

A:Solved: Output Laptop to LCD Tv thru HDMI cable...video slowdown

Read other 11 answers
RELEVANCY SCORE 82.4

Hi,

I've got a HP Pavilion dv6 with an AMD PhenomII N930 Quad Core Processor & ATI Mobility Radeon HD 5650 graphics card.

When I connect the computer to my Samsung LED TV (UN40B7000WFXZA LED) with an HDMI cable , everything works great until I play a video in full screen. As soon as I do, the computer crashes and I get a gray static looking screen and have to restart my computer. This only happens when the computer is hooked up to the tv and I'm not sure how to fix it.

Does anyone know what could be causing this problem?

Any help would be appreciated!!!

A:Computer Crash When Watching Full Screen Video through HDMI output

  
Quote: Originally Posted by Jeefone


Hi,

I've got a HP Pavilion dv6 with an AMD PhenomII N930 Quad Core Processor & ATI Mobility Radeon HD 5650 graphics card.

When I connect the computer to my Samsung LED TV (UN40B7000WFXZA LED) with an HDMI cable , everything works great until I play a video in full screen. As soon as I do, the computer crashes and I get a gray static looking screen and have to restart my computer. This only happens when the computer is hooked up to the tv and I'm not sure how to fix it.

Does anyone know what could be causing this problem?

Any help would be appreciated!!!



Has it ever worked? If so chances are its the video driver. Un-install the current one and re-install a fresh copy
Ken J

Read other 2 answers
RELEVANCY SCORE 81.6

Hi!After some days of use my new ThinkPad Hybrid USB-C with USB-A Dock (40AF) just gave me a black monitor screen on the Dispalyport 1 output. The HDMI port no.1 do give output OK. Tested the monitor's (LG 43UD79) displayport input against another laptop and its working just fine.Firmware of the dock is updated with latest version. And my Thinkpad L580 is also up to date with Win10. Any ideas? 

Read other answers
RELEVANCY SCORE 80

Does anyone know of a plug on the motherboard that could relay 2 channel sound output?
I have an Nvidia card, that doesn't have onboard audio, but does have a plug, to relay sound out thru the hdmi output.

Read other answers
RELEVANCY SCORE 78.4

I have Vista 64 installed on a system with a Powercolor X1950 Pro. Everything works fine until I install the ATI driver. If I do, when I restart the computer, I lose video on both of the card's outputs, but I think Vista is still running fine. If I restart in safe mode and uninstall the driver, everything is fine again. I ran Windows update before installing the driver, but nothing changed. I'm sure I'm using the 64-bit driver. I originally had 32-bit XP installed and everything worked fine after installing the driver. I've searched for possible solutions online, but haven't found much that was useful.
Any ideas?
 

A:No video output after installing ATI driver

The only thing I can come up with based on some other threads is that maybe I need to install the general vista vga driver first. I kept skipping that because I knew I had the ATI driver and because don't remember doing it on XP. Does anyone know if this could be related to my problem?
I'm in the middle of reinstalling XP now, so I don't want to stop and reinstall Vista without knowing if it's a likely fix.
 

Read other 1 answers
RELEVANCY SCORE 78

I'm trying to upload my Sony dcr-trv19 camera mini-dv tapes using "Video 2 PC" with no success. I've tried S-video to S-video, yellow to yellow, and yellow to yellow, white, red without success. I get an MPG file but when I play it there is no video or audio. Please advise.
 

A:Sony video-cam, video 2 pc, no video or audio output

There should be a Firewire (otherwise called IEEE 1394 or DV Link) port on the camera, it looks like a mini USB port. Using a Firewire cable, connect this port to the Firewire port on your laptop or PC. If your PC has no Firewire port, you can add one by buying a PCI Firewire card.
 

Read other 3 answers
RELEVANCY SCORE 76.8

I was having trouble installing the driver for a new graphics card, so I deactivated the On-board Intel video driver.
System rebooted fine immediately after doing this and had the basic safe mode graphics display, but still could not get the new driver to be recognized, so as a desperate act of stupidity I deleted the On-board driver.

Now there is no video output what so ever, nothing at all during boot even, so finding it hard to repair windows or reinstall onboard video driver. (I have the original motherboard disks).

I've tried safemode approach, and also the "wait till fully booted then using 'windows + U' to get the vocal screen reader but no approuches have worked. (I've of course tried booting with windows disc, motherboard disc and new video card driver disc. Also tried different monitors and all the output plugs at back. also tried taking graphics card out etc.)

Any advice would be much appreciated. Cheers, Adam.
 

A:No Display output after disabling video driver on motherboard.

Welcome to TSG.
If you didn't previously told the computer to have dual display, meaning allowing an external monitor, it will be hard to do anything and you might have to install everything from the original disks, unless you have some kind of a networking already set up on that computer and you could access your files from the network to save your files
 

Read other 2 answers
RELEVANCY SCORE 75.6

Hi

Seems like when I upgraded my display driver, every time I wake up my laptop from sleep it does not recognize my TV properly - video is played properly on TV but no audio. Only restarting the laptop fixes the issue (re-inserting the cable doesn't help).

Driver I installed:

I tried to reinstall the driver, didn't help.
Help please

Read other answers
RELEVANCY SCORE 75.2

Okay, here's what I want to do. I want to send video output to a Plasma in my family room and also have output to the computer monitor in the adjacent office. I have the option of using either VGA or DVI to either monitor, so I can use a video card that has dual VGA/DVI outputs. Or, I can buy a separate PCI video card. Right now I have an ATI All-in-Wonder 7500.

Am I better off to get a new video card with dual monitor output or have two separate video cards. If the former, what video cards do you recommend? I know I've seen recommendations for the 9600 Pro, which seems to have dropped significantly in price? I'd like to stay with ATI as I've always used that.
 

A:Dual Video Output or Two Separate Video Cards for Plasma Display?

Read other 10 answers
RELEVANCY SCORE 74.8

Is there are any video splitter , preferebly free which keeps the output video size same as original video size. I have tried some but in the end, they convert/re-encoding the splitted video and the output video becomes large. If anyone knows a video splitter as I stated, please advise.

Read other answers
RELEVANCY SCORE 74

I have a Latitude E7470 and have connected a U2715H display to it. I am using HDMI cable as connection.
Recently I upgraded the video driver to latest 21.20.16.4627 from Dell site. And I noticed that the Dell U2715H display started blanking out and going in and out of power save.
I reverted to the older driver which never gave any of this trouble. I then disconnected the U2715 and tried the upgrade again, then a reboot. And then it works. But only for a while.
Typically twice a day the blanking and flashing power save starts. I have to disconnect the display. Power it off for a few minutes and power on and reconnect.
This is getting annoying.
I looked this up on Dell site and only symptom was with DP which I am not using. I am using HDMI.
I'm not sure if this is a laptop driver issue or a display firmware issue.
Anyone else had this strange behaviour on HDMI.

A:external U2715H blanking after new video driver installed HDMI

Lap tops rarely if ever need driver updates. Revert to the original driver. The update might be for later versions of your model. Check the details for the newer driver. If it ain?t broke.......

Read other 1 answers
RELEVANCY SCORE 74

I can not get HDMI to work after win 10 upgrade. All drivers updated. Windows took everything over. Any Ideas? Even Intel video is not listed anymore. It seems like everything went to Windows generic drivers??

A:After windows 10 update I have no hdmi video or audio outpu...

Hi: I suggest you reinstall the W10 Intel graphics driver and the audio driver from your notebook's support page. The Creators update replaced the audio drivers on my PC's with generic ones too, and I had to reinstall the drivers to get full functionality back.

Read other 1 answers
RELEVANCY SCORE 73.2

We have T470 (20JM) and T470s(20JS) in our environment. Both models are having a problem connecting to external displays using HDMI Intermittently and sporadically the screen goes blank. It does not matter what order I turn on the devices or connect the cables. Randomly the screen will go black - sometimes the image comes back within a few seconds; sometimes the image blinks on and off for up to a minute; sometimes the image is steady and the monitor is usable for an hour or two; sometimes the image stays off for so long (about 30 seconds) that I get a "No Signal Detected" message from the monitor, only to have the image return (sometimes within seconds, sometimes within minutes, sometimes within hours).

Read other answers
RELEVANCY SCORE 72.8

I have a Laptop (Specs up to date on Profile), which I want to connect to a Phillips CRT Television.
The connection between the two is a THREE cord chain. Beginning with the Laptop's (7 Pin - S-Video output) and ending with the TV's (4 Pin S-Video input), The 3 cords go like this: [1] [2] [3]

[7pin>>Yellow Female Composite] >>> [DOUBLED ENDED Yellow Male Composite] >>> [Yellow Female Composite>>4pin]

Is this configuration even possible, and if so, how does one enable the graphics card to send out the signal?
 

A:Solved: (S-Video output) to a CRT TV (S-Video input)

Read other 7 answers
RELEVANCY SCORE 70

Specs:
Asus M3A76-CM
AMD Phenom x3 Processor
2 gigs DDR2 PC6400 memory
Video: PCI-Express 2.0 Palit Nvidia GeForce 8800 GT 1gb Sonic
OS Windows XP Pro SP3
Power Supply 750w
Avg Temp: 38c

No Video through S-Video output in windows.

I have just upgraded my MB and Video Card on a computer I use as an arcade machine.
I need the output to go to a Television through S-Video
The problem is odd because I can see the bios loading and even the "Loading Windows XP Loading bar across the screen on the TV, but once Windows starts the screen goes blank.

Steps taken in preinstall:
I removed all the display drivers prior to installing new hardware and after the install, started the computer with monitor and installed the new Nvidia drivers.

Trouble shooting steps and results:
Pre:
I tried to verify the TV connection but the Nvidia Control Panel will not find my S-Video TV connection, only the VGA is found. I connected the TV and restarted but the TV could still not be found in the Display properties or the NVidia Control Panel.

1. I Connected the VGA connection while the screen was blank on S-Video output.
Result:
The screen DID display on the VGA connection.

2. Loaded windows into Safe Mode.
While loading drivers before safe mode comes up, it hangs at gagp30kx.sys
but continues to load after a while. The display shows on the television in safe mode.

Additional information:
After doing a bit of research I found out that the gagp30kx.sys
is a Via AGP driver.Could this be the... Read more

A:No Video through S-Video output in windows XP

Read other 6 answers
RELEVANCY SCORE 69.6

After compiling all my drivers, I noticed that the video driver page offers to downloads as seen here Intel GMA High Definition Graphics Driver Driver Details | Dell US

Do I just need the update package or will I need to install the hard drive option below it as well?

A:Dell Video Driver update or hard drive update?

Hi ... That is just a Driver for your Graphics Installs on the Hard Drive ...

Read other 5 answers
RELEVANCY SCORE 68.8

I was updating my video drivers with a clean installation ,after the download started my computer restarted before the download finished. When my  computer came back on I had no picture on the monitor.How do I fix this problem?

A:video driver update

Hi Tommy77642,Thanks for posting.Have you tried running the diagnostics at startup?  Press F12 while booting and report back here so the experts can assist further.  ThanksRestart your computer.When the Dell logo appears, press F12 key on the keyboard several times to open the One-time Boot menu.Use the down arrow key on the keyboard to select Diagnostics and press the Enter key.Follow the on-screen prompts and answer them appropriately to complete the assessment.Write down any error codes listed

Read other 1 answers
RELEVANCY SCORE 68.8

I am about to upgrade my video card, replace nVidia with ATI.

What's the best sequence for swapping the drivers? Should I try to remove the nVidia drivers before installing the ATI drivers? Or remove them after installing ATI drivers? Or?

Thanks.

Guy

A:Best way to update video driver?

  
Quote: Originally Posted by Guy Scharf


I am about to upgrade my video card, replace nVidia with ATI.

What's the best sequence for swapping the drivers? Should I try to remove the nVidia drivers before installing the ATI drivers? Or remove them after installing ATI drivers? Or?

Thanks.

Guy


remove current. power down. install new card. power up. let win 7 install driver. If that driver doesnt work well go to web site and download the latest greatest. Install.

Let us know if you need help

Ken

Read other 2 answers
RELEVANCY SCORE 68.8

Well I dled world of warcraft but when I try opening it says : World of Warcraft was unable to start up 3D acceleration. Please make sure DirectX 9.0c is installed and your video drivers are up to date.


Well I downloaded DirectX but it still says the same thing. Now I need to know how to update my video driver, Thanks.

A:Video driver update

We need to know your card to help. Run GPU-Z. It will say which it is.

GPU-Z Video card GPU Information Utility

Read other 9 answers
RELEVANCY SCORE 68.8

Inspiron 3650, Win 7 Pro SP1, 8 GB Ram
Trying to help a friend via long distance with a blue screen problem. Message on computer is as follows:

Problem signature:
  Problem Event Name:    BlueScreen
  OS Version:    6.1.7601.2.1.0.256.48
  Locale ID:    1033
 
Additional information about the problem:
  BCCode:    1000007e
  BCP1:    FFFFFFFFC0000005
  BCP2:    FFFFF88001A261B7
  BCP3:    FFFFF880032945C8
  BCP4:    FFFFF88003293E20
  OS Version:    6_1_7601
  Service Pack:    1_0
  Product:    256_1
 
Files that help describe the problem:
  C:\Windows\Minidump\101416-15600-01.dmp
  C:\Users\Steven\AppData\Local\Temp\WER-28938-0.sysdata.xml
 
Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
 
If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

Checking first off BIOS & drivers are up to date, it shows a newer VGA driver available, but when trying to install, I get the message;
The driver being installed is not validated for this computer. Please obtaine the appropriate driver from the computer manufacturer. Set up will exit.
CLicking yes redirects to Intel's site, where it says th... Read more

A:Cannot update video driver?

bugcheck 0x1000007E
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
due to an malware access violation caused when code in
dxgmms1.sys tried to read memory address 0xffffffffffffffff
There is no amount of time to fix this.
Time for scorched earth reinstall.
 
This is not the remote psychic friends network and Ms cleo is unavailable to diagnose microsoft stop errors.
 
 

Read other 1 answers
RELEVANCY SCORE 68.8

seems nothing is EVER simple. I have a IBM thinkpad 240 2609-21U with windows 2000. I downloaded NHL 2002 demo and it says I need to upgrade my 3d and/or video driver. (Neomagic 128ZV/ZV+/XD) I can't seem to locate any update info. Tried IBM, Windows and Neomagic web sites. I did find a file "neomagic 128ZV+win98.zip" but I'm afraid its just for Windows 98. Any advice what to do?
 

A:update 3d video driver help

try www.driverguide.com
 

Read other 1 answers
RELEVANCY SCORE 68.8

I have a laptop HP pavillion dv5115nr I need a video driver(ATI radon express) and is there such a thing as and sp1 for win 7 ultimate..
Any help I can would be appreciated
Kas

A:need 2 driver/update sp1? and video

Looks like your laptop came with either XP or Vista, looking at HP Drivers and Downloads for Printers, Scanners and More | HP ? Support HP support site shows a ATI radon driver available for Vista it will probably work okay with Windows 7.

You should be offered service pack 1 with Windows update you have it turned on.

Jerry

Read other 3 answers
RELEVANCY SCORE 68.8

Hi, i have just purchased a game called "Counter-strike Source" on this program called Steam.
When i try to install it it sais "Your video drivers appear to be out of date and could cause problems if you choose to continue and run the game. We strongly recommend that you follow the link below and update your video drivers to the latest version available from your driver vendor."

Any help?
Windows Version:Windows xp
Description:Radeon 9250
Version:6.14.10.6614

Which Driver do i download?

A:Video driver update

Hi, To update the driver, go to Device Manager > Display Adapters, right-click the Radeon entry and select Uninstall. Reboot into VGA mode, disable antivirus, install the new driver and reboot to complete.From looking at the AMD website this is showing as the latest update available but was posted Nov. 15, 2006 and is also showing as version 6.11, so try the above and that should give you the latest update available. To Open Device Managera. From the Start menu, select My Computer. Alternatively, double-click My Computer on the desktop.b. Under "System Tasks", click View system information.c. In the System Properties window, click the Hardware tab, and then click Device Manager.

Read other 18 answers
RELEVANCY SCORE 68.8

Hi,

I have a friend who has a custom built computer. The "expert" that built it for her has left town, and did not leave her with any supporting drivers or software. She has never been able to set her display to more than 256 colors, so I figure she needs to load her video/graphics driver as a first step.

She lives a distance from me, and is not familiar with pulling out cards, so I had her look for her invoice. Her video card is described as a STD Nitro 3D PCI 4MB, and she runs Windows NT 4.0. I believe I finally (after a LOT of searching) found the right driver (n3dcnt40.zip) here:

http://www.alfa.com.au/supports/stb/accelerators/nitro/index.htm

Ithis most likely the right driver, or should she find all the info on the card itself first to be sure?

Also, to which location(s) do I have her unzip the files?

stbmini.sys
stb.inf
stbdisp.dll
Disk1

OR, is NT similar to Win/95/98, where when asked for a driver location, you select, "have disk" and use the location of wherever you unzipped those files?

Thanks!
Carrie
 

A:STB video driver update

So long as the OS is NT 4 then it looks like you found the right driver. If the unzip does not create a folder on its own, i would download it to a new folder such as STB and unzip it to there and then windows to it to install.
 

Read other 3 answers
RELEVANCY SCORE 68.8

Hello. First time and sorry for my bad english.  So...  My problem is I have alot of artefacts in some games. And first step in any recomendation - update video drivers. So I tryed to update it from HP site, but newest version for my notebook is 8.712.1.2000 (april 2010). (notebook i bought december 2010). Ok. I downloaded fresh driver from AMD 15.7.1 (march 2016). After installation in summary it sais about parameters not proper and linking to Radeon HD 4250 (not 5650). And Radeon HD 4250 must be update via Windows Update, but Windows use Radeon HD 5650 (and I want use 5650 to, bcouse windows rating  6.7 for 5650 and 4.2 for 4250!). Difference in Catalyst versions that i notice - 03.00.0765(from HP site) have "ATI NorthBridge filter driver" and new ones havn't. Sorry, that was to much, yeah? So questions. How 2 video cards can be in one notebook? Why i need 4250? How i can update Radeon 5650?

Read other answers
RELEVANCY SCORE 68.8

I need to update my video driver for my laptop. I have wireless internet service, but for the desktop only. Is there a way I can download a driver, put it in a folder and burn it on a cd or put it on diskette for the laptop? Thanks for your help.
 

A:video driver update

download the driver to your floppydrive
when you update the driver, browse to the floppydrive and voila..
 

Read other 2 answers
RELEVANCY SCORE 68.8

Dell inspiron 1420

I went to Dell web site, Drivers and Download page.
Found one video driver to be downloaded.




Please give me the detail as to how to download the video driver.
This is what I had tried...........
I clicked the download button > create a folder for the driver R179345.exe in Documents > saved it to the folder > open the file and run it > that is where I began running into roadblock.... please see screenshots which explain the sequence till I could not continue any further.



I clicked OK. Then ....




I clicked Yes. Then ....



I didn't know what to do next.

Was I doing it all wrong ?

Thank you.

A:how to update my video driver ?

You probably ca n't write to the disk.

The way around it is right click and use extract to the same folder your in/downloaed the exe in.

The run the setup in the new folder.

Read other 5 answers
RELEVANCY SCORE 68.8

I have been told I need to update my video driver... and that it is able to be done online, but I have NO idea how or even where to look. Is there anyone here that knows anything about this and is able to help me? I'm clueless!
 

A:update video driver?

Read other 16 answers
RELEVANCY SCORE 68.8

Need to update nvidia video driver,First time ever so have been looking around and i'm a little confused on how to go about it.Can i get away with updating in device manager or must i go into safe mode and clean with driver sweeper,Would rather do the former but i want to do this correctly.

Also what will happen after i un-install the old driver,But before i install the new one?There will be no driver at all?Will this be okay?Thanks for any help.

A:Video driver update

Firstly, why do you need to update video driver?

Read other 2 answers
RELEVANCY SCORE 68.8

Hi,
My system is Windows XP Pro Sp2 with Pent 4 3.00Ghz 512MB RAM

I have two Video drivers on my computer

RADEON 9200 PRO Family (Microsoft Corporation)
RADEON 9200 PRO SEC Family (Microsoft Corporation)

The "Update Checker" from FileHippo.com gives this to download:
ATI Catalyst Drivers 9.5 XP

The ATI Website gives this to download: ( If I haven't made a mistake!!! )
Catalyst? 6.11 Display Driver for Windows XP Professional/Home Edition

Which should I update to? (IF ANY OF THESE!!!)
I'd like to update the driver because sometimes the screen freezes and monitor goes off (as though on standby) I believe it is due to overheating of the Graphics card (but have been told to try and update the driver first).

Thanks

English Teacher

A:Which Video Driver should I update?

What is the make and model number of your computer?

Read other 5 answers
RELEVANCY SCORE 68

My daughter has a Pavilion p7 with an AMD A6-5400K processor which has no video output on either the integrated MB connectors or on an add-in card.Since this seems to indicate that the GPU on the CPU has failed I am also wondering if there is circuitry on the MB which would cause this.The bottom line is: should we be looking at replacing either the MB or the CPU or both?Any guidance concerning this will be greatly appreciated.FredBK

Read other answers
RELEVANCY SCORE 68

I have an S-Video port on my computer and I am going to run it to my 46" Projection TV.

What I want to know is how to switch b/t S-Video out and the VGA out so I can switch between my monitor and TV - is there a keyboard combination I have to hit (like on a function key on a laptop)?

I will only be viewing video files on my TV (so it won't be too often that I use the S-Video out port).

I remember doing this a while back, but it seems like I had to do a restart and unhook my VGA connection to get the S-Video feed to work - there must be an easier way.

Thanks ALL!!!
 

A:Switch b/t VGA Monitor output and S-Video Output

Depending on the card, I am personally better versed with ATI, but I know my Nvidia also, you can set up a dual display and set the S video to play all movies at full screen, and through the control disable the TV when not in use.
 

Read other 1 answers
RELEVANCY SCORE 68

Hey,

I got an on-board video card, S3 ProSavageDDR with only 32MB. I want to update the driver because I want to see if there is any improvement or if I could play some particular games. Anyway, there's a little problem.

I go to Windows Update and they have a driver for my video card. They say it was released in March 2, 2004. But I go to the official manufactoring website, and go to the ProSavageDDR drivers. Now they have new ones to, but they have different release dates than the one in Windows Update. The release date on the manufactoring website is 06/08/2004. Not sure if months or days go first, but either way, the dates are different. Both drivers are digitally signed from Microsoft and work for XP supposedly.

I have DirectX 9.0c with SP2 if that helps in anyway. Also, on manufactoring website, it says "for Chip(s) in the ProSavageDDR Family: VT8372, VT8374, VT8376, VT8613, VT8615, VT8703 (DeviceID 8D04)." Where exactly would I go in the properties in order to figure out this number. Even though I have a ProSavage, I want to make sure that it's the correct one.

Thanks
 

A:Video card update driver

download everest home edition and hopefully it will tell you the right chipset for your video. i hope this helps.
 

Read other 1 answers
RELEVANCY SCORE 68

I can't find a driver update for my laptop, I looked all over for it and can't find one. It is a ATI Mobility Radeon 9000. Can anyone find it?

A:Video Card Driver Update?

This should be the driver set you need.https://support.ati.com/ics/support/default...ge&folderID=293

Read other 15 answers
RELEVANCY SCORE 68

Hello sir,
I have choppy streaming on video downloads on my xp. I read the post and followed your link for the tsg system info. Here is what I have. Can you lead me to a driver update. Any help will be greatly appreciated.

Thank you

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) XP 2000+, x86 Family 6 Model 6 Stepping 2
Processor Count: 1
RAM: 991 Mb
Graphics Card: S3 Graphics ProSavageDDR, 32 Mb
Hard Drives: C: Total - 53732 MB, Free - 13757 MB; D: Total - 3529 MB, Free - 705 MB;
Motherboard: , KM266-8235
Antivirus: Ad-Aware Antivirus, Updated: No, On-Demand Scanner: Disabled
 

A:Solved: video driver update for xp?

That computer is too old and too slow to expect it to play quality videos.

Updating the driver for its S3 Graphics ProSavageDDR graphics device isn't going to resolve the issue.

The last Windows XP driver for it was released in February 2005 and appears to be version 6.14.10.33

------------------------------------------------------------
 

Read other 3 answers