Over 1 million tech questions and answers.

Huawei Mobile connect drivers

Q: Huawei Mobile connect drivers

have problem with vodafone e272 modem drivers on win7 64bit build 7000. Tried vista64bit drivers but don't work.

Preferred Solution: Huawei Mobile connect drivers

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Huawei Mobile connect drivers


I use a Huawei E169 via 3 and initially it would not install. I ended up allowing the software to install from the key drive, then rebooting and allowing it to install the software again.

If I recall from installing it on Win XP, it installs the drivers, asks you to reboot then installs the software to use it.



Read other 1 answers

Hello everyone,

I use Huawei K3765 USB Dongle. I have unlocked it so that I can use other SIM cards with it. I also had to install Mobile Partner for it. But now I am getting an error in Mobile Partner saying, "the device has been disconnected or is unavailable".

I can still connect to the internet through dial-up but to use 3G services I need Mobile Partner. Now here is a link where a solution is posted.


I would like to know whether uninstalling every driver under 'Universal Serial Bus Controllers' is safe or not.

Any sort of help will be appreciated.

Abhishek Sharma

A:Huawei K3765 issues with Mobile Partner (Uninstalling drivers)

And when connected to the internet via dial-up, Mobile Partner identifies my device. But before connecting to the internet, my device is not detected.
Mobile Partner cannot connect to the internet, but when connected via dial-up, I can disconnect via Mobile Partner.
Mobile Partner cannot read my data card ie signal strength is 0%, but it still shows the upload and download speeds when connected to the internet. It also shows the statistics, data downloaded, data uploaded, time spent online, etc. but I just cannot connect through Mobile Partner. I need to connect through Mobile Partner because only then will I be able to connect to a 3G network.

In short, mobile partner doesn't works when disconnected from the internet. Only once I connect to the internet via dial-up, mobile partner can be used.
Any help?

Read other 4 answers

Dear Members,

During the Christmas break I purchased a Mobile Broadband Pay As You Go Dongle (HUAWEI Mobile Connect Model: E160e HSDPA USB Stick) while I was staying in Helsinki. I have purchased my computer from UK and I got the dongle from a department store in Helsinki. I took the dongle back to the shop and it was tested by using another computer than mine and it worked fine. I do not understand why it is not working with my computer.

Can someone help me to understand why it is not working?
Thank you.

Kristina Julin-StringerKristina Julin-Stringer

A:HUAWEI Mobile Connect Model: E160e HSDPA USB Stick

Please do not start multiple threads on the same topic. Continue here.

Read other 1 answers

Connect TP-Link TL-WR841ND to Huawei Mobile Wifi E5776 to increase signal strength
can someone advise how to connect TP-Link TL-WR841ND to Huawei Mobile Wifi E5776?
Huawei Mobile Wifi E5776 is a 4G LTE connection, however it does not get 4G connection in all rooms.
Hence I have kept it in a fixed location where the 4G connection is excellent.
However due to this, I cannot get receive good signal strength in all the rooms.
I have an old TP-Link TL-WR841ND and would like to know if I can use it to connect to Huawei Mobile Wifi E5776 device to receive signals from Huawei Mobile Wifi E5776 to increase signal strength to cover all rooms.
I read that I can use TP-Link TL-WR841ND as a repeater and use it, but it says to install OpenWrt and do lot of things..... I am not sure of all these things..... wud appreciate if someone can help me with this issue?

Read other answers


question is in three parts. Win 7 Home Premium

1. used to have orange mobile broadband wi-fi but was not a good deal so i stopped it. The software stayed on my laptop.

I now signed up for Huawei mobile connect - 3G. On connecting dongle to laptop's USB, nothing happened( I was expecting an 'installing Huawei' window, etc). The dongle works as i can connect to the internet but on looking into it, the dongle connects via the previous Orange software - see two .jpg files. What does this mean? It is inconvenient as i cannot see how much up/download i have used, there does not a[ppear to be any Huawei software to give me any information. should i remove the Orange via Add/Remove Programs and start again with the Huawei dongle?

2. On looking at the security tab in Properties for Orange, am not happy with the CHAP and MS-CHAPv2. see jpg. Can i uncheck them without losing connectivity performance?

3. Still in Properties, Networking tab, dont like the file and printer sharing and client for Ms networks boxes either, just want the TCP/IP version4 box ticked.see jpg.Would i be right in having just IP4 checked?
As you can gather i dont have much of a clue about what is going on.

Ideas appreciated.


A:Huawei mobile wi-fi thinks its Orange wi-fi!

Read other 7 answers

Hi all

Huawei e156g Mobile Broadband USB Stick
HP Pavilion dv7 2070ea
Windows 7 Professional 64bit

The laptop came preinstalled with Vista Home 64bit and i was able to use the mobile broadband without any issues.

I have installed Windows 7 Pro 64 in a dual boot config and it runs fine on wired or wireless connections, but when i try to use the mobile broadband i run into issues.

After the modem driver and software install and a few restarts I was able to get all the devices in the device manager to be happy, and i was able to connect via the 3 Connect software and access the internet. But after a few minutes Windows will inevitably lock up, regardless of what program is being used. The screen will freeze, there will be zero harddrive activity and the only course of action is to hold down the power button

The mobile broadbands company site says that the vista drivers should be happy on windows 7, but something isnt happy.

I really need to resolve this as my mobile broadband allows me to connect to various servers for work via its allowed IP address.

Is this the modem, the USB bus or something else?

I have checked the event log and there isnt anything useful in there.

Many thanks


A:Huawei e156g Mobile Modem Freezes

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />







<TimeCreated SystemTime="2009-11-07T16:50:45.722430300Z" />


<Correlation />

<Execution ProcessID="4" ThreadID="8" />



<Security UserID="S-1-5-18" />

- <EventData>
<Data Name="BugcheckCode">0</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name="BugcheckParameter2">0x0</Data>

<Data Name="BugcheckParameter3">0x0</Data>

<Data Name="BugcheckParameter4">0x0</Data>

<Data Name="SleepInProgress">false</Data>

<Data Name="PowerButtonTimestamp">0</Data>


Read other 9 answers

Hi all,

Recently i purchaced a mobile broadband dongle from 3 on pay as you go. i installed it on my computer and everything worked fine, i then uninstalled the software from the laptop when i stopped using the modem. Now i am wanting to use the modem again when it starts to install it comes up with an error message saying ' The application has a pending system reboot. Please reboot and restart the installer.'

I have restarted the system on many occasions when it has said this but it wont get rid of the message and wont let the installation continue. I have spoken to 3 about the problem and they have said that i will need to edit the part in the registry that is telling the computer that this software requires a reeboot and then to try installing it again.

They are not allowed to tell me what part of the registry i need to edit because people have been changing the wrong things and damaging their computers. Does anybody know what part of the registry i need to edit to allow the installer to continue?

The details of the modem are:
Huawei Mobile Broadband
Model: E156G

All advice will be great



Read other answers

My computer firewall is off too, for testing purposes, the port doesn't seem to be open through http://www.yougetsignal.com/tools/open-ports/

Could this have anything to do with my ISP?
Am I missing anything?

Read other answers

I have recently installed the Huawei ME906S 4G LTE module on my ThinkPad X260. I have installed the driver and enabled WWAN in the sytems Bios. I can see the module in the device manager. Windows network manager is showing the Mobile Insert SIM. When I insert sim, nothing happens at all. It seems like the sim card is not being detected at all. Can someome help? Device managerNetwork mangerI have attached a screen shot of the device manager and the network manager. 

Read other answers

This week at Mobile World Congress, Huawei announced the new HUAWEI MateBook X Pro powered by Windows 10: a new, ultra-slim laptop that weighs only 2.93 lbs and offers up to 12 hours of 1080P video playback, 14 hours of regular work or 15 hours of webpage browsing[1]. Let?s take a closer look:

HUAWEI MateBook X Pro
The new Huawei MateBook X Pro is an ultra-slim yet full-featured 13.9-inch notebook with an all-new 3K touch-enabled HUAWEI FullView Display and 91 percent screen-to-body ratio. Powered by an 8 Generation Intel Core i7/i5 processor and Windows 10, it boasts a long-lasting 57.4Wh (Typical Capacity) battery and a discrete NVIDIA GeForce MX150 graphics with 2GB GDDR5[2] ? making it incredibly light and powerful.

The 3K High definition display with touch and incredible audio with Dolby ATMOS deliver a beautiful, productive computing experience. With Dolby Atmos Sound System, sounds flow above and around you, making you feel like you?re inside the action.

With Windows 10, the MateBook X Pro arrives with great features built-in, including your digital personal assistant Cortana[3] and an integrated fingerprint reader that allows you to login quickly and securely with Windows Hello. The MateBook X Pro also weighs just 2.93 lbs., making it super portable, and has a battery life of up to 12 hours of 1080P video playback, 14 hours of regular work or 15 hours of webpage browsing[4], so you can work and play all day.

Pricing and availability: Beginning in first ha... Read more

Read other answers

hi all got laptop and trying to use this hauwei E220 when I plug in it says it cant connect etc coz of drivers ive looked on web for drivers for windows 7 ultimate but the sites are gone as old I think as they dont open could someone help please laptop is currently on vista but im upgrading in next few hours

A:Huawei E220 drivers

Hi, Have a look at this page, enter your device details into it, seems to be the right site.
Also with Vista, when you start the installation of the drivers, use right-click and run as administrator , rather than open/run.
If there are no drivers for Windows 7, try the Vista version (get the correct version 32 or 64 bit.) They are often the same for many devices.

Read other 7 answers

I know there are other threads on the same subject, but with the given links I always arrive on pages that do not exist anymore.
I would be glad if anyone could help find me a page where to find drivers to make the huawei E220 device work on my windows 7.
thanks in advance...

A:Drivers for Huawei E220 + windows 7

Software - Huawei Device Co., Ltd..

Type E220 in the search bar on the above page.

This is all I found.


Read other 9 answers

I've been using Ubuntu linux for ages on my laptop, but figured I'd give Windows7 a go on my school machine. For this, I use a 3G modem from the Danish carrier "3".

When I previously used XP64-bit, I had to install 3's program called 3Connect to use the modem. When I isntalled Ubuntu, thigns got a lot easier with some betaversions of their network manager, and a stable snapshot was used for the newest Intrepid release: I could simply add the conneciton as mentioned here: Jens Bruntts blog :: Ubuntu 8.10 sammen med Huawei E220 3G kort fra 3 - virker nu

Problem is, the 3conenct thign sworks like **** on Windows7. It has an update, but downloading the update, or simply rebooting the PC, breaks the program, and I have to uninstall-reinstall to connect again. this gets tiresome rather quickly.

I've tried adding the modem as a connection directly, but although I can input the phone-number fileds (*99#) and login+pass (dummy, dummy), I seem to be unable to see, where I'm supposed to add the APN address (data.tre.dk). Anyone know how to do this, so I can get thigns functioning properly?


A:Huawei E220 - Refusing to connect

i have the E160, which is similar, got this to work eventually by loading up the auto run .exe file, say no to the update. unplug the modem, restart pc then plug back in it should then up date, once it has done that click connect, when it has done that go to network manager(bottom right) click on the icon in there you should see 1.3G click on that and it should connect.
hope that helps.


Read other 7 answers

Hi all,

I have a Pre-existing repeating netgear network of a WNR2200 router set up as a base station with a harddrive plugged into it as a network device (readyshare) and another WNR2200 router set up as a repeater.

I want to supply this network using Huawei B260a modem (on the Three network).

I currently have this setup;
The b260a IP is subnet and has DHCP turned on (range -
This is plugged into the internet lan port of the base station wnr2200.
The base station IP is subnet and has DHCP turned on (range -
The repeater Wnr2200 is automatically an access point and has an IP of

This setup works but the speeds are around 1-2mb slower when connected to the netgear network than if connected directly to the B260a.

Any help with this would be greatly appreciated.

Read other answers

I purchased the Huawei EC325 modem from BSNL WLL which uses a USB cable to connect to the PC. My inital reaction was since it was a USB connection and was using a custom software to connect to the net, it would not be possible to connect to the net in Linux using this modem.What can i do?

A:how to connect Huawei EC325 usb modem with Linux

Looks like it's possible, guide here:


With my Huawei, in current version Ubuntu though I just plugged it in & it worked with no configuration needed.


Read other 2 answers

As it says on the tin really! I am an absolute non technically minded person so have no idea how to even start trying to fix this problem. A few weeks ago our router quite happily let multiple devices attach wirelessly to the internet at once but in the last couple of weeks it has started only allowing one device at a time to connect to the internet. If say my partners work laptop is connected then our home laptop/iPad can see the wireless router but it will not allow them to connect to the internet anymore. Can anyone help me to try and sort this please...I can use my computer for basic things but am in no way technically minded so please be very clear and simple with any help you are able to give.


A:Unable to connect multiple devices to internet using Huawei EchoLife HG521 router?

Read other 10 answers

Microsoft Windows Mobile Remote Adapter -from windows update Install  failed - Where can I find this so I can retry to re-install - mobile device does not connect  WINDOWS VISTA- verizon treo running windows mobile 6 professional CE OS 5.2.1620 (BUILD 18125.0.4.2) Here is the error message: Microsoft Corporation - Networking - Microsoft Windows Mobile Remote Adapter Installation date: ‎10/‎4/‎2009 12:02 PM Installation status: Failed Error details: Code 800F020B Update type: Recommended Microsoft Corporation Networking software update released in May, 2007 More information: http://winqual.microsoft.com/support/?driverid=20060042 Help and Support: http://support.microsoft.com/select/?target=hub I could not find anything to help me with this.. I did download & install the new Windows mobile device center v 6.1.6965  but the device will still not connect.. i'm thinking the failure of the Microsoft Windows Mobile Remote Adapter is the problem (i think)  so I want to re-install the update.. but don't know where to get it. Windows update in VISTA does not let you go out and pick an update from a list Any and all help appreciated

A:Microsoft Windows Mobile Remote Adapter -from windows update Install failed - Where can I find this so I can retry to re-install - mobile device does not connect

Your best option may be to open device manager (with device connected) and uninstall any related device, making sure the 'Delete driver software for this device' is checked.Once you have done this, unplug your device, uninstall WMDC 6.1 and reboot your machine. Then follow the instruction on my first reply, this should sort it for you.If anyone is helpfull, please click the 'Vote as helpfull' icon.
If anyone has answered, please click 'Suggest as answer' at the bottom of the post involved :)


Read other 6 answers

Hi At my company we have Lenovo L460 with windows 7 and Cisco anyconnect 4.3 - we have a sim card with 4G data connection to a service provider(Telenor).When I have logon screen for windows 7, I can see with FN+F8 that the wireless WAN is "on", but when I try to connect/logon with the cisco anyconnect "start before logon" module the cisco say that it can't see any internet connection. And I tried to wait for 3-4 minutes so all services where running, but no connection.... If I uses the Wifi connection then it just goes smooth... If I logon to windows 7 and then start the mobile data connection at logon to cisco anyconnect there is NO problem.. So are there somebody who can say that:1. Huawei does not support cisco anyconnect SBL?2. Lenovo does not allow you to start a mobile connection before you logon windows ?3. Or something? A lot of thanks in advance!!!!!!!! Regards niels

Read other answers

Hope this site works, didn't see a subject to cover my problem otherwise. My OS is XP.
Some years ago, I installed a Bell Internet stick and later deleted the program. I've just noticed that I have 'Mobile Connect' still listed in my add/remove programs box, but there is no option to remove it. I can't find it anywhere else on my computer. Can anyone tell me how to get rid of it, please?

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2300 @ 1.66GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 1022 Mb
Graphics Card: ATI Mobility Radeon X1400, 512 Mb
Hard Drives: C: Total - 95370 MB, Free - 23516 MB;
Motherboard: Acer, Inc., Bodensee
Antivirus: Norton 360, Updated: Yes, On-Demand Scanner: Enabled

A:Mobile Connect

There are a number of ways to do this.
You an get rid of the entry in add/remove programs by editing a registry key, but that is the least satisfactory, as all it does is to remove that entry.
The fragments of the program are still there on the hard drive.
Go start
and search for files and folders containing the words - include hidden files and folders.
Bell Mobile

then when search finds them look where they are open them and delete the entries
To do that you may have to go My Computer
click the tools tab
click folder options
click the view tab
click to shown hidden files and folders
click apply and ok.

Please ensure you check carefully what you are deleting.

You may well find that this will then after a reboot remove the entry from Add/Remove programs.

Altrnatively download this and use the Revo Uninstaller
Free edition

CAUTION be even more careful on what you are deleting

Read other 1 answers

Hi there,

I want to find out how I can do that thing where a laptop dials up to the net using a mobile next to it?

I want to be able to do it in the UK.



A:connect to net thru mobile?

Read other 9 answers

Hi, guys. I have connected Huawei switch S5700-24TP-SI-AC with Cisco switch 2960 using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side...Please help.

A:Huawei switch vs Cisco switch, How to connect

What kind of 2960 switch do you have? Have you checked the interface to verify the switch recognizes the optic and all the stats report back as normal? Are you using a Cisco branded optic? Do you see light being shot out from the optic in the 2960?

Read other 2 answers


i was just wondering if anyone could help me track down the latest drivers for my mobile radeon X1300 drivers?
ive checked the drivers section of this site and i download the latest version whcih is upthere but when i install i get an error saying that i dont have a compatible piece of hardware!?

my laptop is an Acer 5102WLMi

thanks in advance

A:Mobile X1300 drivers!?

Well, assuming its like my x1400 mobility, the drivers need to come from the lapotp manufacturer, unfortunately for me new ones have not been created yet.

Read other 2 answers


Since ATI has decided to drop support for mobile drivers I have come here for some assistance. My Lap top proivder has not released any drivers yet so I need some drivers for my ATI mobile card. Can anyone suggest where I can find these drivers

Read other answers

Have tried to connect my Samsung GSH-J700 to my PC, am getting '' problems installing this device'' with the driver.
I installed via Samsungs PC Studio disc then also from Samsungs download page but always with the same problem. Can anyone help, I have sent them an email but no response.
My system
Window XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Toshhiba Sat p10
System Type X86 based PC
Processor x86family15 model 2 stepping 9 genuineiNTEL ~306mhz
BIOS version/date V1.00, 10-3-04
SMBIOS Version 2.31
System Directory C:\windows\system 32

Read other answers

I have recently gone to the T-Mobile Broadband65 hotspot, my Acer Aspire 7520-5185 laptop (can use in on my WII and my Asus laptops) will not connect to it.

At first it won't allow the password, so by speaking with tech support at t-moble we changed the security properties to WPA-Personal, encryption type: AES, allowing the password to be input. I spoke with 2 tech guys to make sure I was given the same info and both report it has to be the computer because the mobile hotspot is running correctly on 2 other systems in the house.

When I try to connect using the t-mobile it states the connection to "T-Mobile Broadband65" was cancelled. This might be due to timeout or user action. View available wireless networks. You can then try connectiong to "T-Moble Broadband65" again or try connecting to a different network. If the problem continues, contact your network administrator or hardware manufacturer for further assistance.

I hope I have given you enough information.


Read other answers

I am unable to connect my ideapad 100 15IBM to my LG G4's mobile hotspot.

Read other answers

Hi, I am helping a friend with his laptop. It is a Packard Bell Easy note TJ67 laptop on windows 7. He had a virus so I used system to roll it back a month and then installed AVG, Superantispyware and adaware to clean up the laptop, which seemed to work fine. The laptop works fine now except for the 3 dongle which I cant get to connect to the internet. I have used the 3 dongle on my other laptop, and the dongle works fine. It installs its own software and drivers and then connects to the internet. I have run a virus scan on the dongle and it is clear. I install the dongle on the packard bell laptop, the drivers all install correctly and the software loads up fine. It even has signal and then when I click the connect button (using the three software) i get the message "The connection attempt failed, Make sure your device is connected to yourand that your settings are correct Would you like to connect again?" I try to connect via dial up on internet explorer and i get the message "Error 633 the device is already in use or is not configured properly"
I can connect to the internet fine through my home wireless system (which is no good to my friend who wants to connect via the dongle at home.
So in short
1) Laptop is fine and have scanned thouroughly for virus and cleaned up
2) Laptop connects to internet through my BT wireless
3) Dongle works on 2 other computers fine
4) Dongle will not connect to internet through packard bell laptop but it worked fine before... Read more

Read other answers

i.m finding "USB not recognizing" problem when  i'm connecting some of the mobile phones via usb datacable

Read other answers

I have a t mobile web connect stick when i plug in the usb it won't download.
T mobile said it's a dell issue and dell cannot fix it as the computer was
purchased in canada. Please can anyone help
it says found new hardware but the hardware t mobile told me to download
is still there and the screen says copying files but it won't copy files
I plugged it into old computer and it works fine so ti's the computer
appreciate any feedback,

A:t mobile web connect and dell

Read other 8 answers

I am having difficulty finding drivers for a 3.5" HD External Enclosure. No much info on this ... on the front it says Pan and Mobile, on the back Made in China.

This is for XP pro ... the OS does not recognize the drive once plugged into the USB slot ...

Any help would be appreciated.

A:Pan Mobile? Enclosure Drivers Needed

You don't need drivers for USB drives in Windows XP. Have you checked to make sure the driver is jumpered as Master? Many USB enclosures need the drive to be set to Master.

You also need to check Disk Management to see if the drive is detected there. If its a brand new drive then you must use Disk Management to Initialize, partition, and format the drive before you can use it. If the drive has been used before there may be a problem with it or with the partition on it.

Disk Management: http://support.microsoft.com/kb/309000

Read other 3 answers

Can anyone point me to a Driver for a Samsung SGH-A421 mobile please. I have downloaded Kies 3 but it does not recognize the phone.

Thanks in advance.


Read other answers

Hi, I recently installed windows 8 release preview on a dell inspiron b130 and everything works fine, except when I press windows + p or go to screen resolutions to hookup my tv. It says to reinstall or check my video card driver. This driver ( for intel mobile (r) 910/915 express chipset series) has not been update since 07, and I can't find any downloads for windows 8 online. Please help me get an updated driver or a workaround to get my monitor projecting onto my tv.

A:Intel mobile (r) 910/915 drivers for windows 8

I don't know whether it'll be possible.

The latest drivers from Intel for those graphics are for XP (XDDM). Windows 7 could use XDDM drivers, but without Aero Glass support. Win8 requires WDDM drivers (1.0 is Vista, 1.1 Win7, 1.2 Win8). They don't exist for those graphics. They probably will never exist.

Unless there's some way to get the generic VGA drivers to give you the features you need, you may be out of luck.

One of the drawbacks to the Release Preview is that it doesn't include the compatibility check that you get with the Upgrade Assistant from the RTM (final) version. I suggest that you download and run that. Bad news is expected.

Read other 3 answers

I've been using this mobile connection for about 9 months now and it has been fine.

I've used these forums many times usually because of Vundo, which seems to be endemic here in Spain. Saying that I have always been able to get rid of it.

Over the last two weeks my connection seems to disconnect when it likes. At first I thought it might be vodafone but now I've noticed that especially in the morning my connection seems to be sending more bytes out that in. It can reach my upload limit of 300 kbps. As the speed of upload gets back towards zero the connection drops. I've checked that I'm not uploading statistics to Vodafone.

How do I find out, what this upload is and where is it going?

Neither Windows Firewall or Comodo Firewall detect anything.
PC Tools AV detects nothing.
Malware bytes detects nothing.

Modem is Huawei E220 usb modem with the latest firmware and software. I tried Vodafone Mobile Connect full version but it was no better, in fact worse as it kept dropping my 3G connection and would not go onto 2G.
I'm not sure what is going on so any suggestions as to where to look greatly appreciated.


A:Vodafone mobile connect lite

Check the applications tab in Task Manger and see what's running when this happens. If that doesn't show anything, try Process Explorer:http://technet.microsoft.com/en-us/sysinte...s/bb896653.aspx

Read other 4 answers

Hi  i am try to connect my yureka moblie through usb cable in my laptop it's shows dos't have mtp drivers .  please help me....

Read other answers

I tried to connect my mobile device to Windows 8 in order to transfer some pictures and neither my laptop can find my mobile neither my mobile to find my laptop device...my mobile is discoverable and i don't know why it can't find it :/ can anyone help me please?

A:How do i Connect Windows 8 with my mobile by bluetooth?

You need software.
Such as this OBEX Commander Download - Freeware Files.com - Utilities Category

Read other 2 answers

I have a Toshiba Satellite C55t-C5300. For the last two weeks, I have been unable to connect to any Wi-Fi network. I only have internet access when I connect my laptop to my phone via the mobile hotspot. When I press the Wi-Fi button it says "No Wi-Fi networks found" and when I run a diagnostic, the troubleshooter says there's a "Problem with the wireless adapter or access point". I have tried resetting, disabling, uninstalling, and re-installing the Broadcom 802.11n Network Adapter several times, but it still doesn't work. I have disabled my anti-virus software, I'm not using a VPN. I have run out of options and I have no money to have the computer looked at and "repaired". I am using Windows 10.

If anyone can offer any assistance, please do! I am desperate for answers!

Read other answers

I'm trying to import an mbn profile with netsh for a mobile broadband connection and have it auto-connect.
The modem is build in to the tablet and registers in windows as a dial-up(wwan), not as a wlan as some USB modems does.
In Windows 7 this was posible with the AutoConnectOnInternet element but this has been deprecated in Windows 8.1.
Windows Dev Center mentions WcmSetProperty but this is in connection with C++ which I have no experions in.

Read other answers

Hi all, Kindl let me know is there any specific driver to be installed for connecting to mobile hotspot. I am unable to connect only this laptop but not other tablets and cell phones. Kindly suggest your help is much apprecciated RegardsPhani Krishna 

A:Unable to connect to mobile hotspot

What phone are you using to create the mobile hotspot?What is the model number (MTM) of the machine you are using?

Read other 2 answers

hi buye a this computer to work but i have problemes to put the hp mobile connect to work can you please help me this is the product part number HP EliteBook 850 G3  T9X36EA#ABU thanks for the help

Read other answers

I am using a HP with Windows 10, and I use my mobile hotspot for internet at my store. It was working with my old phone, and then the first couple days with my replacement phone... yesterday it decided to not connect. My old phone was an Moto X android,
and the new one is an LG android, which shouldn't matter really, because it worked for 2 days and then stopped..... can you shed any light?

Read other answers

I have installed the Garmin Connect Mobile app onto moto g5 phone.  The app appears to run and I tick the terms of reference but it sticks on the Sign On  screen and presents no login options.  The app runs on another phone successfully. Can anyone help on this please? 

Read other answers

i have a LG kp500 phone with usb and cd but i lost my cd. now i cant connect my phone to pc even though i already inserted the usb. do i need to download LG PC suite? if yes where can i download it, i cant find it on LG website.

A:Solved: cnat connect my mobile to pc

Have you tried contacting lg support? Maybe they can point you in the right direction.

Read other 1 answers

how to connect my laptop through mobile hotspot

A:how to connect internet through mobile hotspot

The same way you would connect to any hotspot or wireless connections. You open up a list of the wireless access points near you and select the correct SSID. Provide any credentials it might ask for and you should be good to go.

Read other 3 answers

I have a Centrino laptop running Win XP Pro and a mobile phone (Sony Ericsson T39m...yeah, I know it's a bit old now but it's small and it works), both with IR and bluetooth capability.

Firstly, could someone run through how to set up a bluetooth connection so I can synch my Outlook 2000 contacts with the phone. I have done this once before but can't remember how I did it (which is very frustrating) and I had to completely re-install the OS so any settings I'd originally slaved over have disappeared.

Secondly, on many occasions when I need to connect to the internet there's no wifi access, so it would be useful to connect via the mobile phone. How do I set up the IR and bluetooth connections to allow this - using both dial-up modem access and GPS/GPRS access.

I've followed various instructions (that's a slightly generous description) in the phone and laptop manuals but can't seem to get it to work.

Many thanks.

A:Connect using bluetooth mobile phone

Read other 8 answers