Over 1 million tech questions and answers.

Solved: Radeon 9200 - compatible upgrade = ?!

Q: Solved: Radeon 9200 - compatible upgrade = ?!

I have had an older Sempron 2800, an ASRock Motherboard and an ATI Radeon 9200.

Until recently, doing some demanding tasks, all was well. Indeed all is well, except when it comes to one crucial area (for me) - World of Warcraft.

I have played World of Warcraft for a few years now, on this PC, with no problems. Nothing has been deliberately changed recently, either.

Problem: I reach a certain point in the game area and, no matter what - and I am sure that I have tried all things (all new drivers, re-installs, tweaking configs, etc) - I always freeze.

Though I never suffered before these incidents, I have thought that it would be nice to have a bit better performance / graphics card.

What I found was the ever reliable Tom's Hardware:

Best Gaming Graphics Cards For The Money
I consider myself an intermediate to advanced software user, but don't have much of a clue about hardware.

What I have done is install "EVEREST Home Edition" and so have access to the info that might be needed.

It appears that the card is AGP, as you can see from the screenshot below.

As far as Tom's article goes, I am looking in the AGP section.

Best Gaming Graphics Cards For The Money: AGP Interface

As I may purchase a new PC / have one built, in a couple of months, I would like to pick between the two most affordable (to serve as a stop-gap):
Radeon HD 2600 PRO (Best AGP Card for Under $100)
Radeon HD 2600 XT (Best AGP Card for $100)

Are they both compatible with my setup, because of being AGP, or is there something else that I need to look at?

Provided they are, I will be on e-bay pronto (or, living in London UK, head to my local computer fair tomorrow).

Of course they are both well-priced, but they'd be expensive coasters / door stoppers - if I were to miscalculate.
Everest >> Computer >> Summary (screenshot): HERE

Everest >> Motherboard >> Motherboard (screenshot): HERE

Everest >> Display >> Windows Video (screenshot): HERE
If more information is needed, holler. I usually have my messenger on and will respond asap.


Preferred Solution: Solved: Radeon 9200 - compatible upgrade = ?!

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Solved: Radeon 9200 - compatible upgrade = ?!

Read other 14 answers

Hi my name is James

I am running a Dell dimension 2400 with 256mb ram, celeron processer 2.4 ghz and Intel extreme graphics, and 40 gb hdd and the rest.

I just brought a 256 mb PCI card made by powercolor, built with radeon 9200 technology. Not pci express just straight PCI

Followed the instructions, pluged card in, turned on computer,go into the device manager and i get a yellow
"!" mark with the code 12 error against my card.

Uninstalled onboard intel extreme graphics controller, its model thing is ...
Intel® 82845G Graphics Controller it has 64mb of video ddr ram
Um well as soon as i uninstalled it and rebooted, windows would automactically recongise it again and then yeah. it would become default.
So i disabled it and now its outta use. yay =)
I am currently running off the default windows vgasave graphics thing and i still have the error code 12 on my radeon.

I have installed catallyst, downloaded specific drivers from the powercolor site, installed those and i get either

TUL corporation, RADEON 9200 SERIES ver. [5/3/2006]

just the plain

RADEON 9200 SERIES ver. [5/3/2006]

Well i am using the plain Radeon 9200 series driver ^
And have tried both with no luck.

I read somewhere that i should not use the microsoft drivers
so i steered clear.

Then i saw that I should try adjusting the agp apeture in the bios setup.
To have it under 64mb.
I dont even have a agp slot!! but it couldnt hurt.
... Read more

A:Ati radeon 9200 upgrade from intel extreme graphics , pci , code 12 error

Did u try to install the latest Catalyst drivers? The latest Catalyst drivers do not have support for the 9200 series of video cards. U will have to use Catalyst 6.5, which is the latest one for ur card. Here is the link.

Read other 5 answers

I'm not quite sure if this belongs in the games or hardware forums(Kinda game related), so I'm just giving it a shot here. My computer is very stable unless I decide to play World of Warcraft. When that happens, it runs about 1-20 minutes at a time before the computer screen goes black and A) Stays that way with a sharp buzzing sound in the speakers, or B) Restarts on its own. I have the case's siding off because I thought it was a heating issue (it may still be), but the computer restarts only when I run WoW. I don't see how the video card would have ample cooling without having a fan on it, and I'm not sure if I can just throw one on it and be good to go. Any way I can make my computer run cooler to see if the problem deals with cooling besides throwing a fan on?

A:Solved: Why doesn't the Radeon 9200 have a fan?

Read other 6 answers

Hello guys,
I am using an older ATI RADEON 9200 card and its started to give me problems.
I noticed it when i tried to install a legal Medal Of Honor game.
It led me to notice i have no access into the Catalyst Control Centre where you can make adjustments too the setting of the card.
Everytime i try to access the Catalyst Control Centre i get a "Fatal Execution Engine Error(0x7927f26e)" message and cant open the program. I uninstalled and reinstalled the Catalyst Control Centre + drivers but still have no access.
If anyone has any suggestions for a fix or where i can get information on this problem it would help alot as im starting to think maybe the card is DEAD.

A:Solved: ATI RADEON 9200 problem

Read other 6 answers

The following is all I can find out about my video card. Can you tell from this if I should be able to do an extended dual monitor setup? So far, all I can do is get them to mirror each other.

If not, can anyone recommend a video card that I might get that will do this as well as allow my granddaughter to play Sims 2 and Roller Coaster Tycoon 3. That is pretty much the only games that are played. I prefer to keep it around or better. under $50 or $60.

AdapterCompatibility: ATI Technologies Inc.
AdapterDACType: Internal DAC(500MHz)
AdapterRAM: 128 MBytes
Availability: 3
Caption: RADEON 9200
ConfigManagerErrorCode: 0
ConfigManagerUserConfig: false
CurrentBitsPerPixel: 32
CurrentHorizontalResolution: 1024
CurrentNumberOfColors: 4294967296
CurrentNumberOfColumns: 0
CurrentNumberOfRows: 0
CurrentRefreshRate: 60
CurrentScanMode: 4
CurrentVerticalResolution: 768
Description: RADEON 9200
DeviceID: VideoController1
DeviceSpecificPens: -1
DriverDate: 20040323025952.000000-000
InfFilename: oem40.inf
InfSection: ati2mtag_RV280
InstalledDisplayDrivers: ati2dvag.dll
MaxRefreshRate: 60
MinRefreshRate: 60
Monochrome: false
Name: RADEON 9200
NumberOfColorPlanes: 1
PNPDeviceID: PCI\VEN_1002&DEV_5961&SUBSYS_50001043&REV_01\4&38B71F77&0&0008
Status: OK
VideoArchitecture: 5
VideoMemoryType: 2
VideoModeDescription: 1024 x 768 x 4294967296 colors
VideoProcessor: RADEON 9200 AGP (0x5961)
BitsPerPel: 32
DeviceName: RADEON 9200
DisplayFlags: 0... Read more

A:Solved: Radeon 9200 Video Card

This is finally resolved after downloading the Catalyst Driver and Control Center. I now have my extended desktop.

Thank you.

Read other 3 answers

Can somebody help me with this.It says i need to download and find the chipset manufacturer for my motherboard . But i cant find the files anywere i have found that my chipset /mb is a VIA technologies but i cant fine an update

A:Solved: Need Help putting in a Radeon 9200 in an old HP brio ba410 computer!!!!!

Read other 9 answers

I cannot get help from Dell about a processor upgrade. For some reason, they will not help. They do not reccomend processor upgrades. I have a subject dell with the dell OWG855 mobo. I have the Intel Core 2 Duo E6600 @ 2.4 GHz processor. I need to know (before I buy) if the Intel Core 2 Quad Q6600 @ 2.4 GHz is compatible with my PC and if it can be installed in it? Maybe dell glues them in? This about does it for me with dell. The way I feel about this, I may never buy another dell product.

A:Solved: Dell XPS 410/9200 Processor Upgrade

Read other 15 answers


But anyways, here goes, in volume control, line in is unchecked, then
when I start the ati tv tuner to watch tv on my desktop, all works good
except no sound and it auto mutes (puts a check) in volume control.

My sound card drivers are good, I checked and all is ok, sound is working
good in my OS all is good but with the exception the sound from the card.

All the hardware is properly done for the card, I also tried the wizard to
configure the sound input (line in) but skips that one process, it does all
the rest, scan for channels etc...

Help please!

A:ATI All-in-Wonder Radeon 9200 AGP

Adding my specs...

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Édition familiale, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz, x86 Family 15 Model 2 Stepping 7
Processor Count: 1
RAM: 1022 Mb
Graphics Card: RADEON 9200 SERIES , 128 Mb
Hard Drives: C: Total - 38154 MB, Free - 33687 MB;
Motherboard: IBM, IBM, ,
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Read other 1 answers

I recently purchased a radeon 9200 and I am trying desparately to use the TV out function. The video card appears to support both S-Video and Composite out. The TV I am connecting has S-Video and the standard A/V inputs.

The connector that came with the card has a video jack on one side, s-video on the other, and a video-to-composite adapter. When i connect the TV the display is all messed up and nothing is visible except for an occasional blur of a desktop. I've tried composite to s-video and s-video to video and no luck. Any advice?

I am new to all of this so I'm sure i am doing something wrong. Thanks in advance!

A:radeon 9200 tv-out

I think you may have to go to the display properties and change to TV.

Right click on desktop, choose properties, last tab (Settings), Advanced button, then on the next screen that pops up, to to Displays. It should offer the TV as an option.

GOod luck,


Read other 3 answers

i have always installed nvidia card but where i get them from has switched to stocking ati.
their tech told me this problem is normal and caused by the adi monitor
here is a copy of the last email sent to ati

your faq and search did not help.
i have been building computers for many years now and tried everything that you have listed before
contacting you.
there is no signal from the monitor connection or the ssvhs but there is from the digital out.
the tv button is greyed out so you cannot enable it.
i have tried the windows drivers,the drivers that came with the card and d/l the latest drivers.
all with the same result.
in the display properties when you try to bring up the second monitor,it is not present.
tried different refresh rates
tried differnt screen sizes.

anyone struck this and know the answer

A:radeon 9200 se

Read other 14 answers

hey there, i have a radeon 9200 se 128 mb and i run really low fps in counter strike. I have changed all my rates, and updated my drivers, but my fps intends to drop. I also dont get very good msm and in and out speed. Does anyone have any suggestions? Thank you :slurp:

A:Radeon 9200 Se

i have had luck with halflife period by changing from direct 3d to open gl in the video settings. but im sure it depends on the video card.

Read other 3 answers

Hello, I have problems with my Video Ati Radeon 9200 when I play CS it drops my fpsI download the fix file...but I don't see change...and another thing while I play I suddenly freeze for a second and then continue and then again freeze, I know it's my Video cause I have 768 RAM on my PC, 1.2 GHZ and i have downloaded the Catalyst drivers and uptaded my Windows XP to service pack 2...my Internet connection is 3 Megabit so it's the Video I guess
If somebdoy knows how to fix the problems, especially the freezing pls tell

Read other answers

Hey all! How do I turn off Z-Buffer on my ATI Radeon 9200 card? I heard turning off Z-Buffer would increase performance in games and thats what I need

A:ATI Radeon 9200 Help!

Read other 13 answers

For some time now, I have been having troubles with my ATI Radeon 9200 128 bit AGP graphics card. In graphic applications such as Counter-Strike 1.6, my graphics acceleration locks up during gameplay. The results of this are the following:
1.) The game locks up, and the screen flashes once.
2.) I receieve an error message stating that my computer has recovered from the lock-up, but must be restarted to save the settings.

ATI Radeon 9200 Specifications:
Driver Packaging Version 8.172-050830a1-026409C-ATI
CATALYST™ Version 05.9
Provider ATI Technologies Inc.
2D Driver Version
2D Driver File Path System\CurrentControlSet\Control\Video\{E9BD056F-AFF4-4E2B-AE87-1608D8A5048E}\0000
Direct3D Version
OpenGL Version
CATALYST™ Control Center Version 1.2.2068.42622
AIW/VIVO WDM Driver Version
AIW/VIVO WDM SP Driver Version

I have recently updated my CATALYST Version to 5.9
Within the package came several updates such as ...
-Display Driver
-Control Panel
-Catalyst Control Center

I have gone into Hardware Devices and my graphics card is working properly.

The only assumption I have is that my hardware is damaged. The card itself could possibly be damaged and/or the AGP insertion point could be damaged as well.

This is where another question is rasied. Why is it my computer has troubles running counter-strike 1.6, but it can run World of Warcraft with absolutely no troubles? Heck, I can even run Warcraft III... Read more

A:ATI Radeon 9200

Any suggestions?

Read other 2 answers

How you doing people...
When I first bought my computer I was uneducated on whats good and whats bad... I recently put VISTA onto my computer but I am having problems with my Graffics card... My graffics card does not support Directx9 and I am wanting to upgrade to a better graffics card... MY computer is a 2.70 Intel Celeron... Packard bell... The current Graffics card gives me a line accross the bottom of the screen when watching movies... Can anyone suggest what the best upgrade would be that supports VISTA.... Thanks Mac

Read other answers

wassup everyone im new to the forums and i had i quick questoin about my video card.

a friend of mine gave me a radeon 9200 128 meg vid card and i installed everyhign with so much hassel.

finally i got it to work but my desktop resolution is WAY to low. i put it on 1024x768 and i have a 15" monitor.


thanks in advance

A:radeon 9200 help

Do you mean it won't stay at those settings???

did you uninstall the drivers from the previous card?
that can cause all sorts of problems if you didn't.

Go to ADD/Remove Programs in the Control Panel, remove all video Drivers, restart, and install the ATI ones for your new card.

That should do the trick.

++You might want to try being a bit clearer in future - I'm just guessing that thats what you are trying to say++

Read other 3 answers

I have a problem with my ATI Radeon 9200 SE, I installed the driver then I restarted so the changes could take effect and right after the Windows XP logo(Where you see two little green beams loading) the monitor automatically turns off. Please help any suggestions would help.

A:ATI Radeon 9200 SE

:knock: :unch: :unch: :unch: :unch: :unch:

Read other 2 answers

I was trying to run second life, and it listed two video cards that are compatible. One of these was the "ATI Radeon 8500, 9250, or better" (as they put it)

I have a Radeon 9200 Pro Family, and was wondering if the only reason it won't work with second life is because it needs new drivers, or if even that won't make a difference. If there are new drivers to get, where can i get them?

thx in advance


A:Radeon 9200 pro


Read other 2 answers

well I bought yesterday ati radeon 9200 to play counter strike with more fps and i bought more 256mb sdram but.... i've only got 30 fps... dunno why.. i dl last drives do every commands in counter strike console.. when i had my 32mb video card i had 40 fps and now....

amd athlon 600
ATI radeon 9200 128mb
384mb sdram
win xp sp1

Hope u can help me

A:ATI RADEON 9200 - cs FPS

The ati radeon 9200 is a very slow budget card. What was your last card?

Read other 7 answers

i recentlly got a little bored and noticed that my radeon 9200 has a video jack in (the yellow plug) in it... so i was wondering if anyone would know how... or if its even possible to hook up a ps2 to my computer and play straight through my moniter (syncmaster 750 i think is my monitor type)

A:Radeon 9200... ps2???

unless you have a ati all in wonder 9200 card no you cant. that yellow rca hook up is very much likely an rca out so you can play your pc on your tv like your playstation.

Read other 2 answers

i have video card ati radeon 9200 and i need drivers for this.
Thank you alot

A:i need help - ati radeon 9200

You will find it here :
Graphics Drivers & Software

Read other 9 answers


i hav just brought a radoen graphics card my problem is that i keep get crashes and wen windows starts back up again it says " the driver for the display device was unable to complete a drawing operation ..please check for a driver update. the RADEON 9200 series seems to be resonsible for the system instabuilty.
the driver i have now says date 12/12/2003 version : i did and windows update but it doesnt find any updated drivers for it???

Any ideas???

thanks ipatriot

A:Radeon 9200 se

try the one from ati site it was updated 4-07-04 driver

Read other 1 answers

I am trying to get my radeon 9200 128mb video card to work. After several days of it not being able to enable AGP (I made a post about that already) nothing was working so I reformated my PC, downloaded the latest and greatest drivers, and managed to get everything to work. I have a 4in1 via driver for my soyo kt400 dragon ultra motherboard that needs to be installed to make agp work. I have the correct driver for my card, and it worked for several days. Then, I downloaded a whole bunch of windows updates and it began crashing whenever I load a game, half of the time using vpu recover to restart, and the other half just restarting by itself. It also randomly restarts sometimes when I try using mozilla firefox or am just looking at my hardware config. dxdiag tells me that directDraw acceleration, Direct 3D acceleration, and AGP texture acceleration are all enabled, and they work properly when I test them. My ati (and omega, i keep switching between the two to see if the other will work) control panels both tell me that AGP 8x is enabled as well as AGP read, write, and fastwrite. I have my AGP aperture set to 128mb, and AGP read, write, and fastwrite all enabled in my BIOS. All that said just to say everything appears to be set up correctly until I try and load a game(WoW) and it freezes(although it worked with the same drivers yesterday, before I installed 75 windows updates). Any suggestions besides rolling back my windows updates and never installing them?
&nb... Read more

A:Radeon 9200 crashing

wow that is a tough scenerio,anyway first dont set yo aperture to 128mb,leave it to default,then make sure that your primary vga is AGP that is all in bios setup.lastly go to control panel + administrative tools + event viewer then find out what exact causes the crashng,hanging etc.then repost a new question.otherwise i think its not your card but conflict in drivers.so u should think of catalyists.wish u luck. R

Read other 2 answers

I'm running an HP a3040n machine with Win XP PRO/SP3 with all MS updates.
Would this be the correct sequence to re-install the 9200 Radeon?
1. Boot machine into Safe Mode
2. Use add/remove programs to remove all (old) ATI files
3. Install 9200 Radeon card to PCI slot
4. Shut down computer
5. connect VGA cable from 9200 to monitor
6. Re-boot machine into bios and set primary video to PCI
7. Install latest driver from ATI

Thanks for looking...

A:Reinstall Radeon 9200

Do step 3 after step 4. Don't want to be physically installing (or removing) hardware while the PC is on.

I would also add a step 2.5 where you delete anything your display adapter from device manager too.

6 is necessary if you are going from onboard to a PCI card. Are you sure the 9200 is a step up though? Thats a really old card. What is the onboard card, something like a Rage Fury?

Read other 3 answers

I just installed a new driver for my RADEON 9200 from https://support.ati.com/ics/support/KBAnswer.asp?questionID=640

(Catalyst 5.11 Windows XP)

So currently this is installed and my computer's performance is awful. When I maximize or minimize a window it takes like 5 seconds. And also when i scroll through a page in firefox everything is all "shifty" There was a help thing on something like this and they called it slow re drawing, but it didnt help.

My old driver worked fine, but the reason i was getting a new one was because when I play Day of Defeat: Source, there are 3 white lines that run across the screen and i thought it was a driver problem.
Before this i tried letting windows pick the newest driver by going to the hardware device manager, but the driver it installed didn't go along with XP i guess.

So i either need to fix the driver making my computer lag, or i need to fix the 3 lines that are ruining my game.

A:RADEON 9200 problems

Read other 10 answers

Hi guys, first sorry for my bad english it's not my native one so..

I have a problem with the other PC, which is having video card - Ati Radeon 9200SE.Everything worked fine yesterday but some thing lagged so i download and install the newest drivers for the video card and from then the problems starts :
Firstly my screen blinks and turns black is very slow, and Grand Theft Auto : San Andreas which runs perfectly fine yesterday can now be played for like 2/3 minutes then it freezes and the pc need a restart.I tried many solutions such as rolling back drivers, update drivers, going back to the old drivers that i was before, using driver sweeper to clean the driver files but nothing helps.So any ideas beside reinstalling the OS how to get everything good and going again ?

Thanks in advance.

Read other answers

Help. my drive vanised. i tried download it online but it says the is no vga driver. my computer is in 4 bit graphics. Helps! also my installation cd cracked cd palyer won't play it. HELP

A:Ati radeon 9200 driver gone

well...your post makes no sense atall BUT here is the ati 9200 driver for xp

Read other 1 answers

i put 7 on this old pc i have that was made with some parts. its got a ati radeon 9200 card in in with 128mb. now i dont think its gonna do aero buts thats not my concern. i wanted to know if there were any drivers that worked with 7 because im stuck on the default res of 1024x 768 and ill i wanna do is get it to my monitors 1440x900.

any help will be appreciated thanks.

A:Windows 7 & ATI Radeon 9200

hm... did you try the legacy drivers from the ati site?

Read other 5 answers

I have a ATI radeon 9200 and has been working fine with windows xp up until now but then i installed windows 7 and when I go to Device Manager it just picks it up as a standard VGA adapter. I really want to play some games and other things but cant as it thinks its just standard. I also looked at CPUID cpuz and it says its ATI but it doesnt pick up that it is 256mb

A:Ati Radeon 9200 with windows 7??

The ATI Radeon 9200 is not supported under Windows 7 (no drivers available from AMD/ATI) .

Read other 2 answers

I have been trying for a while now to configure my Radeon 9200 to the correct color/lighting for my desktop and to play games such as The Sims 2. I cannot get it right. The game is always darker than it should be and I can't get the color right for the desktop. I have looked all over the internet for answers but fail to find them in Layman's terms. Also, should I use OpenGL or Direct3D? I am not great at computers but am not totally stupid either. If anyone could help out, I would greatly appreciate the effort. TIA

A:ATI Radeon 9200 configuration help please

Use D3d for the Radeon. On your Radeon settings (icon with ATI on it) when you click on it to open it are you now in control centre, in there there is a section "colour" where you can adjust the gamma brightness etc for the desktop.
I assume the SIMs 2 has an options menu where you can adjust the brighness settings?

Read other 3 answers

ipc config:-
p4 1.5ghz
512 ram
ati radeon 9200 se

i had nvidia riva tnt model 64 b4 i uninstalled the drivers and replaced the card.
when i started my comp it detected my ati card so i installed the driver from the cd they provided while installing windows gave an error sayinf "not digitally signed driver". i choose to continue anyways. now i cant install the lates version of drivers n becoz of that i cant play games
kindly help

A:Ati Radeon 9200 se problem

Hello and welcome to Techspot.

Uninstall all your graphics card drivers, for Nvidia and ATI from add remove programmes in your control panel. Reboot your machine.

Download and run the free Driver cleaner pro programme from HERE . Read the instructions carefully. Boot into safe mode, then run the cab cleaner first for both Nvidia and ATI. then, run the driver cleaner for both NVidia and ATI.

Reboot your computer and install the latest drivers for your Current video card, from the ATI website.

Regards Howard :wave: :wave:

Read other 3 answers

A friend of mine did an odd thing.
Before installing his new Radeon 9200 vid card. I told him to uninstall his present vid card drivers. Instead he uninstalled the old card from the device manager.
Now that was screwy but shouldn't have been that big of a deal.
Right now he's stuck in default VGA mode. Old drivers are uninstalled. New card and drivers installed but it's stuck in default VGA. The device manager shows two items under display adapters. One is default VGA other is ATI Radeon labeled as secondary. It also shows it as a PCI as opposed to an AGP
Reading through Microsofts knowledge base it appears to be a known bug with the AGP showing as a PCI.
I've told him to get the Win2000 updates/hotfixes but was wondering if anyone else had input.

A:Radeon 9200 and win2000

Read other 15 answers

I just got a 9200 radeon se series and i installed it and everything but I cant switch the 3D option to OpenGL instead of having Direct3D any remedy would be apreciated.

A:9200 Radeon problem

I have never had the need to switch modes manually with that card. If the game requires OpenGL, it kicks in automatically. What is the problem you are having? Do you have the ATI drivers? The default Microsoft drivers do not have OpenGL support.

The most recent Catalyst driver for that card is here (if you have XP):

Read other 3 answers

I bought a new video card about 3 months ago I bought a ATI Radeon 9200 SE series and its been working fine up untill now I was playing Counter Strike and the Screen minimized and the screen colors got twisted and wierd then I got a error message that said something along the lines of my display driver was messed up or something I didnt get the whole thing before it went away and for a while when I got to the video card specs it says it had 64mb ram when the card has 128mb when I installed it.

A:Radeon 9200 problem

We need to know more info about ur PC and your setup before we can give a definitive answer to your problem. Theres a post on this thread at the top about what you need to list.

Now, if i just had to take a guess at it i would say that you need to uninstall / reinstall ur video driver. Check Radeon's site for a new/updated driver for you card.
Note: you may have to go into safemode to uninstall the driver you have depending on the OS you are running. Listed below is Radeons Site.

Read other 1 answers

Hi guys
I bought a PCi Radeon 9200, i installed it, but when i turn on my computer on, it doesn't detect it, somebody can help pls,
I got a hp pavilion 513n (Base processor and speed C(W) 1.8 GHz/400 Chipset 845GL Memory Component Attributes RAM (standard) 256/2100 DDR, Video graphics Down Integrated in Chipset, NO AGP slot)

A:PCI Radeon 9200 installation

Read other 10 answers

I have lost my disc and need to reinstall it. I have already been to http://www.ati.com to find any updates or whatever and have failed. All I am trying to do is reinstall it shouldn't be that hard so.... Please help.Thank you in advance.

Read other answers

my video thingy. i have trouble updating the driver etc. It works perfect before hand but whe i update it it keeps restarting the computer. this is an update from windows update.

radeon 9200 se agp (0x5964)
Internal DAV (400MHz)
128 MB
power coloer radeon 9200 se
bk-ati ver008.015.033.000

i had to do system restore to fix the problem. is there something wrong?

A:RADEON 9200 SE AGP (0x5964)

I would advise AGAINST instally ANY MICROSOFT video driver updates. I have never had one that works. Use the MFG's site to get updated drivers.

Read other 2 answers

plz help me i bought a new budget saphire radeon 9200 pci card with 128 mb ram
my problem is when when i boot up windows xp it boots to a black screen i have tried formatting and reinstalling with the same problems however it will boot up in safe mode so i am running windows 98 now and it boots up fine with it but i want xp. i tried installing latest drivers in safe mode but that didnt solve it i have the latest bios update i think and the latest motherboard and chipset drivers plz help me thanks btw my system specs are 1gig celeron processor 128mb ram soon going to be upgraded to 256 6wmm7 gigabyte motherboard with intel 810 chipset and onboard 810 graphics chip which is disabled for new radeon which only boots up properly in 98

A:new radeon 9200 problems

Read other 9 answers

hi all I have this radeon 9200 128 the chip provider is (SIS- xabre) and I want to install the ATI 5.10 driver but the setup doesnt work it gives me an error messege ( the setup wasnt able to fiend your heardware )or something like that I can only install the driver that came with the card (on the CD) so I dont know what to do can anyone helps me ?

A:ATI Radeon 9200 128 problem

Read other 16 answers

I have an older Gateway Athlon 1.2 ghz computer with XP pro and an ATI 9200 card.

I just re-loaded the system from scratch after a hard drive failure. Fresh start with all updates, drivers, etc....

The screen will periodically blank out and/or lock up totally. I cannot figure out the problem. I know it is driver related.

When I used the origianl drivers, I would get the BSOD with a memory page fault error when settings are above the lowest.

The newest drivers will ultimately lock the system, but I don't get the BSOD.

any ideas?


Read other answers

I play every game I tried with this with the omega drivers and they all work fine... F.E.A.R., HL2, nfs mw, the godfather, whatever... Seems to me oblivion should run, but when i get in game everything's bright white and i can't really see, any suggestions on correcting this?

A:Oblivion on Radeon 9200 SE

Read other 11 answers

I have an HP Pavillion with a Radeon 9200 (128mb) display card and I'm running XP SP2. I have been experiencing lock-ups and getting the MS Online Crash Analysis showing an unknown error in ATI Graphics Driver. I also get vertical lines across the entire screen sometimes and a message that says the display driver has stopped responding, referencing "ati2dvag".

When I check the drivers in the device manager, it shows 2 entries:
Radeon 9200 SE
Radeon 9200 SE Secondary

I only have one card, so why would 2 show up? I've tried uninstalling them and having HP reinstall, but I always end up with 2.

I'm looking for suggestions? Card Bad? Update drivers from ATI? Please help.

A:Radeon 9200 Problem

Read other 8 answers

I am a having a problem with my Radon 9200. I just bought it about a month ago and I tried to set it up with my Earth and Beyond test configurator thing. And it says that my card appears to be Fill Rate Limited. But if I put the color depth to 16 bit it doesn't say that it's fill rate limited. The FPS seems to stay at 30 FPS when on the 32 bit color depth. With my Nvidia GeForce 4, it seemed to work a lot better with Earth and Beyond. Is there anyway I can fix this? Plz help! Thanks!

A:ATI Radeon 9200 Problems

Probably get a quicker response if you put this in the hardare forum instead of a forum for graphics and images...

Read other 3 answers

Hello all. I have a Radeon 9200 256mb graphics card. Now I know this card is good enough to run Knights of the Old Republic I and II. I can play both games for about 15 minutes before my computer crashes. Any suggestions would be greatly appreciated.

A:Radeon 9200 Issues

Get the latest drivers for your graphics card from ATI and download the latest patches for the games. Unpatched KOTOR II had problems with ATI cards.

Read other 1 answers

I have just reformatted my hd and re-installed windows xp and the Asus A7V600 VIA KT600 8x AGP DDR400 Serial ATA Giga LAN/Sound/USB2 ATA133, 4in1 Driver (with the AGP driver) for the motherboard and the driver for the ATI Radeon 9200 card. The problem is that the display is stuck in 800x600 at 85hz anytime I try and change the refresh rate or the display setting, which is more important, my machine automatically re-boots itself! What can I do so that I can change my display settings, it is becoming really annoying to not be able to change to a decent size screen, as it used to be on 1280x1024!

A:Problem with ATI Radeon 9200

There is an option to restart the system after making display changes. If you hit the advanced button on the screen you are on to change the display setting it's the next screen. Either way your settings should be saved however. So post back if you still have a problem.

Read other 2 answers

I'm trying to set up the second display using the TV-Out on my Radeon 9200 SE. I got everything hooked up, set the "Extend Windows to this Display", and I can move things over to the TV and "maximize" no problem, but when I do a "Full Screen" using Windows Media Player 10 or the program for my satellite card, the picture "jumps" from display 2 to display 1 (which is then in full screen) and the screen area in WMP goes black on display2.

I've tried updating the drivers and software as per ATI's website, but there is no change.

Is there something else I can do, or is "full screen" not possible with this card?

I'm running ....

Athlon XP 3000
512 MB Ram
120 G HD
ATI Radeon 9200 SE 128MB
SB Live!
My monitor is Default Display 1
TV on TV-Out Display 2

The "make this default" options on both are "greyed out" so I can't change between the two (make TV default and Monitor #2)

A:Using Display 2 with Radeon 9200 SE 128 MB

I have my radeon 7000 series set up the same. I think it depends on the software you are running. So far Ive found that power dvd, winamp, and media player 10 work fine on my system. I only set it up yesterday so I havent tried anything else.

Hope that helps. Rik.

Read other 1 answers