Over 1 million tech questions and answers.

HP DeskJet 722C Printer

Q: HP DeskJet 722C Printer

After I re-filled my black ink cartridge (for about the 5th time) I get an INCORRECT INSTALLATION message on my screen.

I have re-installed the cartridge several times, cleaned and checked all the connect pins and even put in a new HP 45 black cartridge. No help!

The material prints jut fine if I press the OK on the message and in fact prints ok even if I don't press OK.

IDEAS?

Thanks,
shortcut

RELEVANCY SCORE 200
Preferred Solution: HP DeskJet 722C Printer

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: HP DeskJet 722C Printer

Read other 6 answers
RELEVANCY SCORE 96.4

Hi,

I have an HP Deskjet 722C printer installed on a windows xp home pc. the pc is only about a month old. Anyway, when i go to print out a test page, it starts and then shuts the system off. I've searched the forums and can't find any solutions for it. HP does not have updated drivers and the drivers that are being used are on the xp cd already. I just have no idea what would cause a total shutdown. I did uncheck the reboot on error option under startup and recovery. Any suggestions???
Thanks !!!
 

A:deskjet 722c printer shuts down xp

http://h20015.www2.hp.com/hub_searc...FIKSAUNZQ?reg=na&cc=us&docName=bpd09005&lc=en
 

Read other 2 answers
RELEVANCY SCORE 78.4

07/29/04

Can't seem to get an older computer to communicate with a DJ 722c. Before the drives were re-formatted and Win ME clean installed this machine used this printer directly and more recently on a network. Connection is parallel and I keep getting the message that the two can't communicate. Any ideas?

Thanks
 

A:HP DeskJet 722c

Go into add/remove programs and remove anything that is related to the 722. Reboot and if windows finds your printer, cancel the install. Instead wait until windows completes its boot and then install the software that came with your printer. Follow the prompts on the screen. Hope this works for you.
 

Read other 1 answers
RELEVANCY SCORE 78.4

For unknown reasons hard drive on my HP Pavilion desk top crashed about a couple of weeks ago. It is running Windows7, 64 Bit. Computer is about four years old. Best Buy guys Reinstalled windows with the back up disks that I had created when I first got this computer. I have an old HP Desk Jet 722c that I had been using with this system. I had to buy USB to Parallel Adapter cable and download a 'patch' for this printer and I never had any problem with it till I tried to use it again after the Reinstall.

There is no problem installing the printer, cable driver is also installed without any problems, I downloaded the 'Patch' again but I am not able to print. I have run Utilities etc to check for any problems. nothing is reported.The cable that I am using is Belkin F5U002V1. Also bought a new cable( similar) , did not work. When I check the Event Viewer for Printer services it shows error 1726. I have tried changing Port from USB0001 to LPT1/2/3. In that case it gives error#372/ Spooler operation Failed. I have tried to start/ restart Spooler also. Nothing seems to work. I am not computer savvy, I cannot check/ edit Registry etc but I did run CC cleaner just in case.

I have installed HP updates also, and window updates are on auto.

I would appreciate any help in solving this 'mystery'.
 

Read other answers
RELEVANCY SCORE 78.4

07/29/04

Having trouble connecting a 722c with an older computer using a parallel cable. Before reformatting the disks and installing Win ME this machine used this printer directly and more recently on a network. I've got the latest drivers from HP but I keep getting a message that the computer and printer cannot communicate. Any ideas?

Thanks
 

A:HP DeskJet 722c

Uninstall the printer-driver and delete the directory where it was installed.
Disconnect the printercable from the PC.
Reboot, go into BIOS, find the LPT1 settings. Make sure they are set to ECP and using DMA 3, 5 or 1. Save and exit.
Boot into Windoze. Now switch off your antivirus/firewall software and all the programs that have little icons in your System Tray.
Now install your HP-drivers first and then the printer.
HTH
 

Read other 1 answers
RELEVANCY SCORE 78.4

07/28/04

Having no luck at all installing an HP DeskJet 722c on an older computer with a reformatted system drive and a clean install of Win ME. Got the latest drivers from HP but I keep getting the message that the printer and the computer are not communicating. What am I missing???

Thanks
 

A:HP Deskjet 722c

Here try this website:
http://www.computer-and-printer-reviews.com/hp-printer-drivers.html

Hope it works
 

Read other 1 answers
RELEVANCY SCORE 77.6

I have been having a problem with my printer not purging documents. Right now I have my printer blinking at me and when I right click on the icon, it tells me it is deleting printing...I have asked it to purge all documents both with the icon and with going into "settings" "printers"...help???

Mary
 

Read other answers
RELEVANCY SCORE 77.6

I have a new Windows 7 laptop networked to my Desktop XP machine. They are both in the same workgroup. I have a DeskJet 722C connected to the XP machine & it is working fine. When I try to connect/install this printer to my new Windows 7, it can't find the driver. I checked with HP & they said they don't have one for "7" but it is contained in Microsofts stash, which it isn't. I tried to connect using the 710C, 720C & 500C printers, but none of those drivers work. Does anyone know if there is a generic driver or some other driver that might work?

Merci

A:HP DeskJet 722C Driver

  
Quote: Originally Posted by effjay


I have a new Windows 7 laptop networked to my Desktop XP machine. They are both in the same workgroup. I have a DeskJet 722C connected to the XP machine & it is working fine. When I try to connect/install this printer to my new Windows 7, it can't find the driver. I checked with HP & they said they don't have one for "7" but it is contained in Microsofts stash, which it isn't. I tried to connect using the 710C, 720C & 500C printers, but none of those drivers work. Does anyone know if there is a generic driver or some other driver that might work?

Merci


Welcome to the forums effjay!

HP website for your printer drivers: Select your operating system HP Deskjet 722c Printer - HP Customer Care (United States - English)
Shows a Vista driver... which outta do it!

If it wont install or print natively, try compatability mode by rt clicking and choosing Troubleshoot compatability. Remember to first uninstall any printer drivers you have tried previously.

NOTE*** I just clicked the Vista link on the above link... as you said it says there is no driver and should be in Vista... No mention of Win7!

Here is the MS Win7 Hardware info on your printer... Windows 7 Compatibility for DeskJet 722C: Drivers, Updates, Downloads





Quote:
Information coming soon
We are working with the device manufacturer to confirm this product?s compatibility.

Read other 5 answers
RELEVANCY SCORE 77.6

After a print job finishes a box opens up stating that HPFVLS14 caused a general protection fault in module HPFVLS14.EXE. Pressing "Enter" closes the box and everything returns to normal. I am using a Dell XPS T450 with Windows 98SE. What can I do about this? I did uninstall the printer and then reinstall it. Same problem.
 

A:Problem with HP DeskJet 722c

Hi and welcome to TSG,

Ifound this in my research that appears to fix it:

Close all programs except Explorer and Systray by going through the CTR+ALT+DEL routine. Make sure all programs all are shut down except these two.

Close the "Close Program" window.
Click Start and Run
Type in hpfcfg14.exe, and enter
Click continue in the HP Deskjet configuration window that will open
Remove check marks from the following:
Print cartridge query
Bidirectional communication
Launch toolbox when printing (when available)
Click OK
Restart Windows
 

Read other 1 answers
RELEVANCY SCORE 77.6

Does anyone know if the HP Deskjet 722c is a "sharable" printer?

We have a home network with 2 wired computers and 2 wireless computers, with a mix of Win 98, SE and Win XP home.
We can share a HP Photo smart 1218 with all of the computers, but we cannot get the Deskjet 722C to share.
It appears to set up correctly by installation of the drivers, but when we try to print to it, we get a message that says it can't communicate with it and the file has been deleted.
The 722C is on a pc that is running 98SE.
Any help would be appreciated.
 

A:Sharing Deskjet 722C

Read other 16 answers
RELEVANCY SCORE 77.6

I have a HP deskjet 722C and it has suddenly stopped working.

The power light is on, it looks like it's working fine.

I re-installed the drivers, and then clicked "Add New printer". Windows informed me that the "Operation could not be completed". Device manager didn't detect the printer at all, but it did detect the LP1 printer port. It says that that port is working.
 

Read other answers
RELEVANCY SCORE 76.8

07/20/04

A refilled cartridge quit printing yellow so I pulled it and refilled all three colors, still wouldn't print yellow----cleaned, primed etc and no luck. Inserted a new cartridge (several months out of date) and still no yellow. Tried all the cleaning tips on HP's site to no effect.

Anyone have an idea??

Thanks, Jim
 

A:HP Deskjet 722C - Yellow won't print

It is likely that the Out if date and refilled cartridges are the problem if you have tried all cleanignroutines........try a new cartridge.
 

Read other 1 answers
RELEVANCY SCORE 75.6

Thx in advance for input :

error writing to LPT 1
unknown system error

comments : I have external Iomega Zip drive and HP ScanJet 5P as part of my system. The printer starts to print word document and stops mid stream. In the past I have shut down computer, restarted and it works. I'm thinking of uninstalling printer and scanner and reinstalling. In the past I have had .dll error messages(I may have inadvertently deleted some .dll a while back when moving scanner files from C drive to Zip drive, my system has never been the same since.) Your consideration is appreciated and lunch is on me if we ever meet.
 

A:{SOLVED} HP Deskjet 722C print problem

Read other 12 answers
RELEVANCY SCORE 75.6

Recently installed a HP Officejet 7310 in my own PC system and gave my old HP DeskJet 722c to my son. His PC with MS2000 doesn't have the driver listed. Their PC is primarily a game system not tied to the internet. Printing is a sometime but necesry function. Simply I need a driver download to put on a CD. Any ideas?
 

A:Solved: Misplaced startup CD for HP DeskJet 722C

Just download the driver from HP http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=DeskJet+722c&submit.x=3&submit.y=6
 

Read other 3 answers
RELEVANCY SCORE 53.6

Using HP 648C Deskjet printer, the problem is that when i try to print
something the paper and power led start flashing and my screen says
that i am out of paper when i have plenty of paper. I can get rid of the
error message and the flashing leds by shutting off the power and
turning it back on but the problem comes back when i try to print
again. Can anyone hell me with this problem?
 

A:HP 648 Deskjet printer

Georg: Checkout this website and see if any of the links solve your problem......

http://www.hp.com/cgi-bin/cposuppor...jet620191&ctflag=&iqry=&ctry=&lang=en
 

Read other 1 answers
RELEVANCY SCORE 53.6

To change printer properties one can either go to settings-printers-properties or to the properties tab on the window that appears after the file-print menu. When I change printer properties using the first option, I find that the settings are not changed unless I change them again using the latter path. This happens repeatedly when I change the "print in greyscale option".
 

A:HP deskjet printer

I just double checked mine, I have a DeskJet 640 C, and an OfficeJet 600, and it stays changed on both....when you change it, are you hitting ok, or just closing the box?
 

Read other 1 answers
RELEVANCY SCORE 53.6

I posted this same question a couple of weeks ago and got no replies, so I am trying again...hopefully someone will read it and have an answer.

I just got an HP Deskjet 320 portable printer and attached it to my Compaq 4110 laptop. I am running Win 95 on the laptop and installed the drivers that I downloaded from HP. The printer prints quite nicely except that approximately every 3/16 of an inch there is a white line. Other than that the print quallity is super. Does anyone have any suggestions as what I might do to alleviate this problem?
 

Read other answers
RELEVANCY SCORE 53.6

I have an HP Deskjet 320 portable printer and have installed the drivers on my Compaq 4110 Laptop computer. Brand new cartridge in the printer. When I print it prints bars of print approx 3/16 high with white lines between them. The bars are printed great. Does anyone have any idea how to eliminate this problem?? Does the same thing when printing text.
 

Read other answers
RELEVANCY SCORE 53.6

I cannot get my DesKjet 720C to print in colour even after I turn off the check in the "print in greyscale" box under colour. I noticed that the apply button at the botom of the window does not activate when I change properties.
 

A:HP Deskjet printer

Check your color cartridge. It could be clogged too. You can clean the jets via the printer properties.
First make sure you have version 10.3 of the Hp drivers.

http://www.hp.com/cposupport/printers/software/dj720en.exe.html

the newer version 10.3 isn't much different feature wise, but it could have some fixes. That is what version I use.

Check the settings in the printer properties too. Make sure your print quality on normal and the proper paper type selected. Put colorsmart II on automatic. Disable ICM.

You may have to uninstall the older drivers first. You could also remove the printer from the device manager, have windows detect again and then install the 10.3 drivers.

[Edited by Shadow2531 on 08-16-2001 at 06:52 PM]
 

Read other 2 answers
RELEVANCY SCORE 53.6

I'm running Win XP Pro on an AMD 2000 Thunderbird with 512mb memory. I have an HP Deskjet 500 running on my parallel port. The printer is working fine, but whenever I send something to the printer, my system practically comes to a standstill until the printing is complete. Seems like this should not be happening!

Does anyone have any suggestions for how to fix this?
 

Read other answers
RELEVANCY SCORE 53.6

I'm running Win XP Pro on an AMD 2000 Thunderbird with 512mb memory. I have an HP Deskjet 500 running on my parallel port. The printer is working fine, but whenever I send something to the printer, my system practically comes to a standstill until the printing is complete. Seems like this should not be happening? I went to the HP web site to get a newer printer driver and it shows one available, but I cannot for the life of me figure out how to get the +_)(*&^%$#@! to download!
 

A:HP Deskjet 500 Printer

Read other 6 answers
RELEVANCY SCORE 52.8

I cannot uninstall an HP Deskjet 460 printer.

Nothing happens when I click on it in Add/Remove programs or on its uninstall facility in All Programs.

It seems to have become corrupted and I need to re-install it.

Be glad of some help
 

A:Cannot uninstall HP Deskjet 460 printer

Try the free Revo Uninstaller.
 

Read other 2 answers
RELEVANCY SCORE 52.8

I have a HP Deskjet 842C. It uses a Parallel port, and hasnt been used in a while. When I turn it on, it does its "reset" routine, and as soon as it stops, all three lights flicker very fast. If I press the resume button, then the power and the resume lights flash, slow this time. The only other option i have is to turn it off, and if i turn it back on, it goes through the whole loop again...
Any help would be appreciated thanks.
 

A:HP Deskjet Printer problem

When you say"hasn't been used in awhile" how long are we talking? Sometimes ink will harden to a point that thingsdon't want to move(just like rust). I'd remove the cartridges and clean the sliding bar,or whatever the proper name is, with a Q-tip with rubbing alcohol and the cartridges also. This definately will not hurt, just be careful..
 

Read other 1 answers
RELEVANCY SCORE 52.8

Hi.

I have received a HP Deskjet F2492 All-in-One Printer.

Can anyone tell me if it has wireless lan ?.

I have searched the HP site, but havent found anything about lan for this printer.

It can run via USB, and does it.

I also think it can be shared via USB, but then I think that the computer to where it's being installed with shall be active all the time.

A:HP Deskjet F2492 All-in-One Printer

Hi there ... I take it you did not get a Manual .. Should be some thing in there

Manuals for HP Deskjet F2492 All-in-One Printer | HP? Support

Read other 3 answers
RELEVANCY SCORE 52.8

I have a Dell 400 MHz w/128 ram and an HP 722C printer. recently, the printer started taking an extremely long time to print. When I print something, the first line or so prints normal and then there is a really long pause. Than another line will print. Then a really long pause, etc. Eventually it will just stop printing altogether. I have tried re-installing the drivers and this issue was not resolved.

Any ideas?

Thanks.
 

A:HP deskjet printer issue

You might try this driver. I think most of the 722s shipped with the 10.0 driver. http://h20015.www2.hp.com/en/softwa...c=en&softitem=Microsoft Windows 98&sw_lang=en

When you say you reinstalled the driver did you remove it in add/remove programs? You have to do that and it is probably best to remove the printer from the printer folder as well. Reboot the computer and cancel out of the new hardware box for the printer. Install the software and reboot and it should show up.

First make sure it is showing as an EPP or ECP printer port on the details tab in your printers folder: Start>Settings>Printers. You might also mess with the spool settings, but note what they are so you can reset them.
 

Read other 1 answers
RELEVANCY SCORE 52.8

I want to connect my 'redundant XP' via a USB cable to see if I can use it as a printer server. It does not detect the presence of the printer which is however shown as installed. When I click Add Printer the response is that 'spooler is not available.' I have not been able to find 'spooler' on the XP. How do I deal with this?

Read other answers
RELEVANCY SCORE 52.8

I've been unable to print even B/W text with my HP Deskjet 940c for some time, and the status light is blinking to indicate an installation problem with the color cartridge (rather than just an empty cartridge, although it probably *is* empty). I've tried unplugging and replugging the printer, wiping off the copper contacts, firmly reseating, etc. Because it used to work, I assume the cartridge itself isn't defective. I'm trying to gauge whether it's worth gambling $35 for a replacement cartridge if it turns out that the problem is something else and the printer will have to be replaced anyway. (I'm reluctant to do that
unless it's necessary because it's hard to find a model that will be economical over time given that our usage is low, we don't print much in color, and we never print photos.)

Any ideas about whether a replacement color cartridge is likely to work?

Thanks for any help!
 

A:HP Deskjet Printer Problem

Read other 14 answers
RELEVANCY SCORE 52.8

Although I use a Canon printer myself, a friend has asked if I could help with a problem on his HP deskjet. We are both so called "silver surfers" but I'm reasonably literate. My friend is completely new to it all. I installed the printer according to the book and it appeared to work on normal b/w text A4 plain paper. However on trying to print colour text the printer simply started then hung and would not budge.
I uninstalled it using Windows (VIsta home premium) uninstaller and re-installed it. (He uses a Dell laptop in the Inspiron series.) It appeared to finish the re-install but the CD icon stayed spinning on the screen and I had to close down to get rid of it. Again the printer would produce a test page and b/w text but not colour text where there was a mix of b/w and colour text. One thing I would add is that on the 3rd attempt to reinstall it did not completely finish the reinstall but went into a loop? at the "installing software" line. However it would stll print b/w text. Can you please help? We would have gone gray in the head by now if we were not already there.
Thank you
Vatten
 

A:HP Deskjet D1660 printer

Firstly you might like to consider going to the printers support pages on the manufactuers website. See if you need an update to the drivers for the printer.
Second. Have you tried your canon on the other machine ?
As you probably know, when it comes to fixing anything techy its a case of trial and error in tracking down the fault...and its always the last thing you try

It the printer is fairly new then it most likely a software/communication problem between both machines.
The fact it hangs when being installed suggests this.
When my HP plays up I have to switch off my lappy and then it prints,yes I need a new one ..lol

If its an old machine then it may not work with Vista or might work with Vista but only 32bit machines.

Not printing colour means it was not told too.
Printer stopping means its busted or its waiting for information.
Again it seems to point to communication issues which in most cases means driver update or a sharp blow to the side of the machine. I would opt for the former as the latter can get messy
 

Read other 3 answers
RELEVANCY SCORE 52.8

I have a Windows XP with a HP Deskjet 895cse printer. My printer will print from the Internet but makes all the right noises but prints nothing from MS Word.
I have uninstalled and reinstalled the printer but that does not fix the problem. Any suggestions? Also, I can not find HP toolbox.

In an effort to clean up my computer so that it would not run so slowly, I ran defrag and removed a number of old programs that were only frequently used. Prior to all the cleanup, this printer performed very well.
Thanks,
 

A:HP Deskjet printer problem

Read other 12 answers
RELEVANCY SCORE 52.8

Does anyone have an HP deskjet 5550 printer?

I was given this printer bare with no install instructions, no cd,etc.
I already had a spare usb cable and i got the install instructions and drivers from HP. I installed this printer into a spare test unit that i keep just for testing. Its P3 733 and has win xp pro. At least i tried to install it, no way, kept asking for files that werent there. I contacted HP who told me to install HP 550C drivers instead.
I did that, and with some other adjustments, like having to uninstall usb drivers and rebooting so system could re-install them,and a few other adjustments, its working. The tech guy told me "The issue seems to be with the some of the missing files from the Deskjet 5550 drivers which are required by the Operating System"
My cousin, who gave me the printer, installed it fine in his P4 system and he has win xp pro w sp2 installed.
I dont have sp1 or sp2 installed in my test unit.
I dont want to install the HP 5550 in my main unit as i have a Lexmark 4350 all in one unit that i like, although i do have sp 1 installed there.

My questions are:
Would the absence of sp1 and\or sp2 make a difference in wether one could install the 5550 drivers instead of having to revert to the 550 drivers?

If anyone else out there has this printer installed with either set of drivers, can you tell me if you have sp1 or sp2 installed?

I hope to get some idea of other peoples installations and if they had any issues with thi... Read more

A:Does anyone have an HP deskjet 5550 printer?

Try this
http://www.softwarepatch.com/utilities/hp5550.html
 

Read other 4 answers
RELEVANCY SCORE 52.8

My problem is that everytime I print, I have a ArcadeTown download pop-up with instructions for setup. I had downloaded a Alien Shooter from ArcadeTown at one time for my grandson and he hated the game. I uninstalled it and now everytime I print I get this setup download. I have tried to delete it from as many files as possible, but can't seem to get rid of it. Any suggestion? I would uninstall my printer and re-install it but I got the computer and printer from a friend so I don't have disk for printer installation. If I knew more about computers I could probably download from a site, but I am not that computer literate. Thanks for any suggestions. Lana
 

A:Printer Deskjet 712C

The printer drivers are all downloadable for every Windows version from HP.

If we knew your Windows version a more direct link could be found, but go to http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers

And enter 712C in the window and go from there.
 

Read other 2 answers
RELEVANCY SCORE 52.8

Hi a problem on a friends machine they upgraded their motherboard and processor, but when they tried to install their HP Deskjet 845c usb printer the instalation failed.

The usb cable and hub have been checked and the other three usb items are working.

Any ideas please: all I can think of is that the instalation disc might be faulty or there is some kind of software conflict

moose69

 

A:HP Deskjet 845c usb printer

Read other 8 answers
RELEVANCY SCORE 52.8

I am posted this at bleepingcomputer for others to see that may be having a hard time installing a printer driver after a Windows 7 32-bit repair installation.  
 
 
Cut & Paste from post on HP website;
 
HP Deskjet 6540 need driver


 
‎06-05-2016 04:35 PM

Product Name: HP 6540
Operating System: Microsoft Windows 7 (32-bit)

https://support.hp.com/us-en/contact-hp/product/HP-Deskjet-6540-Printer-series/357210/model/357212?s...
 
Printer still very good condition.  Did Windows 7 repair install now cannot get printer to work.
HP Installation CD is outdated.  Cannot get Windows 7 Home Premium CD to install driver.
 
Sometimes I can get HP Deskjet 6500 Series to appear in Device Manager then it disappears.
 
And where is the HP printer drivers located on the Windows 7 Home Premium Disk?
 
This printer has worked flawlessly for years, worked on this Dell Desktop for years.
 
Just need a little help.
 
thanks,
 
TxTrapper
South Texas
-----------------------------------------------------------------------------------
Cut and Paste from HP Website;
 

Re: HP Deskjet 6540 need driver


‎06-05-2016 07:04 PM
 
I managed to fix it.  What I did was go into REGEDIT and type in "Find"  HP Deskjet
 
I had to remove about 30 entries.  Then I restarted the computer.
 
Then I went into "Add a printer" network printer,  \\Oxxxxx... Read more

Read other answers
RELEVANCY SCORE 52.8

Is a HP Deskjet 5650 capable of printing custom length banners? I have everything selected on the printer page that has anything to do with printing banners with no result.

I am using Inkscape to create banners and then print the banners.

I am trying to print a 40 inch long banner. (I will generally be
printing banners between 24 and 40 inches long.) When I try to print the
banner, only the first page prints. Everything then stops like the
print job was completed. I get great one page banners but....

I am using a PC running XP with an HP Deskjet 5650 printer. I then tried to print a
banner using my second computer which has Win 98se and a different HP printer
with the same results. I conclude that I am not setting Inkscape
correctly for printing the banner of this size. Is this a correct assumption?

I am using Inkscape 0.42.2. The banners look great on the screen but... Please
help me to print the complete banner(s).

Thank you so much in advance.

jt
 

A:HP Printer Deskjet 5650

Read other 6 answers
RELEVANCY SCORE 52.8

I hope someone can help me with this problem. my Printer has worked fine up until the last few days. So I deleted it and am trying to reinstall it, with no luck. This is the error message I get when I try to reinstall my printer, this is the error message I get.

This printer cannot be installed now because it's driver.
{You_must_use_the_supplied_setup_program_to_install-this_

printer!} could not be loaded.
The driver or the INF file may be damaged. Restart Windows, and then try again.
I have tried restarting and tried over and over and it still won't work. I have the setup CD, but it still won't install. Any help would be greatly appreciated.
.
 

A:HP Deskjet 952C printer

Read other 15 answers
RELEVANCY SCORE 52.8

Hello, This is my first post. We have an HP Deskjet 6980 printer that we use wireless. The problem that we are having . Is the Network light keeps flashing and we aren't able to print.
 

A:HP Deskjet 6980 printer.

Have you configured the printer with the network information? It looks like this printer supports WEP and WPA. Print out your network settings and see where you need to provide input.
 

Read other 2 answers
RELEVANCY SCORE 52.8

My sister is trying to connect her chrome book to a HP DeskJet 2548 printer but it won't allow her. we have been working on this for hours and no luck.

Read other answers
RELEVANCY SCORE 52.8

I hope someone can help me with this. I have tried everything.

I purchased this printer at christmas. I had a hp deskjet 920c and thought I would like a newer one. I hooked everything up by the directions. When I tried to print out something all I got was A bunch of letters, numbers, symbols etc.
I called hp tech support. We went through the whole set up again and even changed out the cables. Uninstalled and reinstalled the printer. Still same thing.
HP sent me a new printer. Guess what ? Same thing again.
I called again. We went through the same thing again. No luck.
To make a long story short. I am waiting on my 4th printer to come in the mail.
I am running windows ME.
My son has a pc and it has windows xp. I hooked up to his and the same thing happened.
This is really starting to get the best of me. I have used a lot of HP products before and never had any problem.
I no you can get a lemon sometimes but come on three in a row.
Please can someone offer any help........
THANKS
 

Read other answers
RELEVANCY SCORE 52.4

i am using windows 7 ultimate.
on my lan there is another machine running windows xp pro which has a local printer connected. the printer is shared over the network.
when i used windows xp, i was able to add the printer as a network printer.
now, when i am using windows 7, i am able to locate the printer on the network but i cannot add it as a network printer since windows asks me for drivers.
i grabbed the latest drivers for the printer from microsoft update site and tried to provide it when i was asked, but windows didn't except it.

i know the driver is good since i was able to use it when the printer was connected to the windows 7 machine.

is there any resolution? can i install the drivers somehow manually? should i provide you with the inf file of the driver?

A:HP DeskJet 960C Network Printer

Hi Bigjohnny. I realise you have probably already done this, but Im going to tell you how to set it up step by step so we know exactly where the problem is (if there is a problem)

First: make sure drivers for the printer are installed on the computer.
also make sure the Machine with the printer connected, and the printer are both turned on.

Next: Open Devices and Printers. Delete any instances of the printer that may be there (to avoid conflicts)

then, click "Add a Printer" at the top of the Devices and Printers window
Select "Add a Local Printer"
Select "Create a New Port" and when it asks for the type, leave it on "Local Port"
When it asks for the path put //<ip address of the machine the Printer is connected to>/<printer name> (no <>'s) example: //192.168.1.2/printer
When Windows asks for Drivers click "Use Existing Drivers" (or similar, I can't remember the exact name.... but it should be obvious, just dont click "Install new drivers")
Set the Newly added Printer as Default.

Let me know how you get on

Read other 8 answers
RELEVANCY SCORE 52.4

my hp deskjet d1660 printer is offline.

Read other answers
RELEVANCY SCORE 52.4

hello guys, my printer not work.
erorr message : device not connected.
but I hooked up the socket

i driver downloaded this link : https://www.hpdriver.org/hp-deskjet-3630-driver/
thanks for help.
 

Read other answers
RELEVANCY SCORE 52.4

I've finally got around to setting up my home network. I have the HP Deskjet 5650 printer directly connected to my VAIO notebook which and the VAIO is also directly connected to the wireless router. I am running Vista Home Premium 64 bit on the the notebook. The printer works fine connected to this computer and in the past has worked fine when connected directly to the following two computers.

The other two computers on the network are running XP SP2.

When I try and add the network printer to either on the XP SP2 computers I get the message:

The server for the "HP Deskjet series (HPA)' printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Other , cancel and contact Administrator or manufacturer.

I have the original software that came with the 5650 but the correct driver cannot be found on the desk.

Does anyone know how I can get the two satellite computers to recognize the printer or where I can find the driver?

Thanks in advance!

A:Trying to add HP Deskjet 5650 printer to network

Hi, I think your problem is that HP provides drivers for deskjet 5600 series only up to XP OS. If you want to have this printer to work with Vista, your only possibility is to use a very rudimentary driver which is part of Vista. This basic driver works, OK, but you lose a lot of the nice functions/buttons which you find in the XP driver, double side printing etc etc. You say you have used this printer connected directly the XP machines, I guess you have noticed the difference between available functions in the XP driver and Vista driver? Why not connect your printer to one of the XP machines? That will work fine, I have tested it. Printing from Vista will of course only give you the basic functions, but if or when you would like to do a more sophisticated printing, just do that with the XP machine. The 5600 is a very good printer. Hope this will be to some help.

Read other 1 answers
RELEVANCY SCORE 52.4

I need the printer driver for HP Deskjet 3915. The closest I can find is 3910 will it work? windows xp SP3 new windows install.

A:I need the printer driver for HP Deskjet 3915.

You can download the Windows XP driver from the following weblink:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-32810-2&cc=us&dlc=en&lc=en&... or http://ftp.hp.com/pub/softlib/software5/COL11207/dj-32810-2/3900_enu_win2k_xp.exe The product website is available from the following weblink:http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&os=228&product=1139325&softwareitem=dj...

Read other 2 answers
RELEVANCY SCORE 52.4

The printer, as the subject title reads is refusing to print. The power indicator button just blinks alone with the paper indicator lights. I try to turn it off, using the power button, but am unable to. I unplug the power from the back of the computer for minutes at a time and once it's plugged up again, the power button light and paper lights still blink. I have done practically everything possible to get this to print, to stop that blinking but nothing.

I've run several diagnosis programs and they all say the same thing that I already knew, it's a problem with the connectivity. I've done everything that they have told me to do, restarting the computer, unplugging the printer. I've done everything short of throwing it out of the window (which if I didn't need to print these documents I would).

Computer specs:

OS Version: Microsoft Windows 7 Professional , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 8400 GS , 512 Mb
Hard Drives: C: Total - 152524 MB, Free - 77827 MB;
Motherboard: ASUSTeK Computer INC., P5KPL-AM EPU, x.0x, 102655020001685
Antivirus: AVG Anti-Virus Free, Updated and Enabled
 

Read other answers
RELEVANCY SCORE 52.4

I have a HP deskjet 932c which I just reinstalled, because I had to reintalled windows 98SE. Now my printer spits out a sheet of paper on reboot/startup, printer prints very slow and settings are on normal print, and when I print from the web the page starts to print, but if I close the IE window the print job print characters and not the text. I have a cable connection, I thought the job would be in the printer que and I could close the window.

I have a Dell Dimension 2400, 40 gb hd, 128mb, pent 3 processor.

Does anyone have any suggestions on how to fix this?

Thanks
Jim
 

A:HP deskjet 932c printer problem

Hi JCross, I have the identical printer . Is it USB? I know I so often have made the mistake when I have reformatted of NOT remembering to unplug my USB printer from my computer. WIndows then puts in its own drivers and your installing the true drivers over top DOES NOT WORK. You have to go to the HP site if this has happened and use their deinstall usb drivers application ... and then reinstall properly according to their directions
http://h10025.www1.hp.com/ewfrf/wc/softwareList?product=61236&lang=en&cc=us&lc=en&dlc=en&os=20
This is the page with the drivers AND the usb uninstall utility. You have to use that first according to their directions and then follow the directions exactly for reinstalling. I hope this helps.
Linda
 

Read other 3 answers
RELEVANCY SCORE 52.4

My HP882c deskjet printer which was working well for over a year suddenly will no longer print in color. It will copy something in color ,but it will not print anything from my files or the internet in color.It prints OK but everthing comes out in black & white.Can some please tell me what I might do to solve this problem.?
 

A:HP882C deskjet printer-no color

Read other 7 answers