Over 1 million tech questions and answers.

Old CD-writer Problem, not writing

Q: Old CD-writer Problem, not writing

This is a long story...

I had a new Teac CDW and an old HP CDW on my machine.
Both were working perfect with Nero 5.5.
Until I realize that my new Teac W552E had a manufacturing defect. So I removed it and sent it back to the service center.

Now I'm left with the old one. At first the computer said ATAPI uncampatible at every reboot. I connected to the secondary master cable, in place of the new Teac drive, then I changed the BIOS to set secondary master (the HP drive) to Auto and Non-installed to secondary master where the old HP was previousely.
Now, I don't have this Atapi warning.

My HP drive is detected and is able to read CD-R(W) from any application, including WExplorer and Nero.

When I started to burn to CDR-W, Nero shows "HP drive time out" (or something like that), then Nero freeze.
It doesn't seem to write anymore...

I don't think it's a problem of software since it's exactely the same system/config/installation as 2 weeks ago when I removed the new Teac drive.

I'd rather think that it can be a BIOS or a cable connection problem or that the HP drive is dead...

Any suggestion?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Old CD-writer Problem, not writing

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 62

Hi All,

I have trawled the internet for a solution but nothing offered has yet fixed my problem.

I have a Samsung external USB DVD writer that is on the compatibilty lists for Windows 7 64bit with no additional drivers required.

The problem I have is thus : I can format a blank DVD using Windows Explorer, I can create new folders and files on the DVD by right-clicking in Windows Explorer, but I cannot drag-and-drop or cut-/copy-and-paste any existing files from my HDD to the new DVD.

I have tried the upperfilters / lowerfilters fix and the bcdedit fix, but neither have worked.

I don't want to use a 3rd party program as doing it through Windows Explorer is so much quicker and I don't have another 3rd party app cluttering my machine...

Please could someone help me out?

The only thing I haven't tried yet is setting the drive-type in the registry to 0x00000001... it is currently 0x000053f7

Any ideas?

Thanks in advance,

Martin

A:USB DVD Writer not writing

I also had problems with Windows implemented DVD writer.
For couple of years I am using the JetBee program. It's free , it's lite(only 1,67 Mb) and is very user friendly .Try it, You won't regret.

Find it on this site : Complex New Technologies - professional portable CD/DVD/Blu-Ray/HD-DVD data/audio/video burning, mastering and grabbing software development

P.S. There is free and payed versions - the free is enough for routine work.

Read other 4 answers
RELEVANCY SCORE 61.2

My Cd Burner recently stopped working. Whenever I try to burn a CD the option on the right isn't there (Write these files to CD). Sometimes it says that a CD isn't inserted or when it does start to burn when I click next it says that there is no CD inserted when there is. (I'm using a C-RW)...If someone knows what the problem is please tell me! I would greatly appreciate it!
 

A:Solved: Help!CD WRITER NOT WRITING!

Read other 12 answers
RELEVANCY SCORE 61.2

Hi,

My DVD Writer is writing DVD's but not reading them either when I right click & 'Explore' or I double click the drive icon. I get the message 'Please insert a disk into drive'.

I am able to copy the DVD from my DVD Rom but after writing, the DVD Writer does read it.

Pls assist resolving the issue.
 

A:DVD Writer - Writing but not Reading

Read other 14 answers
RELEVANCY SCORE 61.2

I am new to scanning/cd writing. I have scanned several documents into a folder and can see them in the folder and want to put them on a disk. I copied them to the disk, but when put the disk in another computer, it told me to either insert a disk or the disk wasn't formatted. It took time enough to write the files to the disk, but I can't recognize the disk. Any suggestions?
 

A:cd writer not writing scans to CD

Is the disk rewriteable one or a plain CDR? Also if your burning software does not close the session another drive will not eb able to access the data on it. What software are you using??
 

Read other 2 answers
RELEVANCY SCORE 61.2

I had a CDRW that I replaced with a CDRW/DVD+RW.

The software that came with the DVD does not do CDRW's,
only CDs.

Can I use the software from the first drive to do CDRWs on
the new one?

One other question - the CDRW software with the first
machine was B's clip gold. I found that other PCs
couldn't read CD's or CDRWs written with it, and that
it wouldn't read CD's/CDRWs written on other PCs.

Is there a different software out there that I could
download to do CDRWs on this new drive?

I'm building a new machine with XP Home, and will
be moving the DVD to it.

I will reinstall the CDRW into my existing machine and
keep it operational.

I'd really like to find a software that I could use on
both to write CDRWs that other PCs could read etc.

Thanks!

The new one is a Sony, and came with NTI software,
both to make CDs (not CDRWs) and DVDs and CD+RWs.
 

Read other answers
RELEVANCY SCORE 60.8

Hi Everyone,
My DVD writer is Samsung TSST SH-S182D. Lately it has started writing erroneous DVDs.I am copying AVI files, some DIVx files on the DVD as DATA DVD in Nero. Now it starts writing normally but halfway it will stop or take long hours 9-10 hrs to write and then also give me disc full of errors.I am using good media to write, I have cleaned the lens using good quality lens cleaner also i have updated the firmware. What may be the problem? I am pasting one of the log. I have got few suggestions on another site, but those didn't helped (http://club.cdfreaks.com/f7/plz-help-dvd-writer-writing-errornous-disks-276513/)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Nero\Nero 7\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.9.1
Internal Version: 7, 5, 9, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB07 - HA 1 TA 0 - 7.5.9.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW SH-S182D>Version: SB07 - HA 1 TA 0 - 7.5.9.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160211AS atapi Port 4 ID 0 DMA: On
CdRomPeripheral : GLIJ YFCL6R4H2N8 3.5Z aawp76sj Port 7 ID 0 DMA: Off

=== CDRom-Device-Map ===
GLIJ YFCL6R4H2N8 G: CDRom1
TSSTcorp CD/DVDW SH-S182D I: CDRom... Read more

A:Plz Help. DVD writer writing errornous disks

Read other 7 answers
RELEVANCY SCORE 60

I have installed a new DVD writer for a friend. Its an LG 4120B which can apparently handle DVD+RW, DVD-RW, CD/R and CD/RW.
I have not been able to do what I promised I could do with it, which is to make a DVD+RW that could be copied on to from the desktop. When I format a disk with Nero it works for copying files from nero but it is not recognized on the desktop. Then I put in another disc and I get an error formatting it while trying to copy to it using nero's create a data disc.
I have included the error log following this. Please help if you can see from the log where I may have gone wrong. (BTW I was getting a message each time that the disc drive is not in DMA mode so I have gone to the driver and turned it on. I am going to restart to see if that makes a difference. Thanks and here is the log:
1A20-020E-0000-1349-1210-6697*

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A104 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4120B>Version: A104 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST DVDRAM GSA-4120B (Target 0, D: ... Read more

A:Solved: DVD writer not writing disc properly

Try it again with DMA on. This is very important and you may need to update the drivers for the motheroard/IDE controller to get the best performance. Do you know what motherboard you have or what it said the IDE Controller was in the Device Manager? Intel, VIA, ALI. SIS, etc.

You also need to make sure DMA is enabled in the BIOS setup. This is before Windows loads and you generally press F2 or DEL to get into the setup. Then look for DMA settings, maybe under Advanced or Chipset settings and make sure its enabled or set to AUTO.

And on the back of the drive you should make sure the jumper is set correctly. If you have the DVD drive on the same cable as any other drive then make sure that one of the drives is set with the jumper on the back of the drive to Master and the other drive is set to Slave.

You may also want to download the latest patches to Nero from here: http://www.nero.com/us/nero6_3.html

If you want to drag and drop files on a CD or DVD then you also need to install INCD thats comes with Nero and use it to format the disc. This is a seperate application from the main Nero program.

You can download the latest INCD from here: http://www.nero.com/us/update.php?pak=5

You may also need to update the firmware on the drive. Not all media works with all drives unfortanetely but soemtimes a firmware update can resolve this.

http://ca.lgservice.com/index_b2c.jsp
From that link select Device Driver, then DVD-ROM, and scroll down to the 4120B(ver 111) and click on th... Read more

Read other 2 answers
RELEVANCY SCORE 57.6

My 4 year old Dell vostro 1400, a carryover from my son's college days, has stopped reading and writing DVDs, though it reads and writes the CDs perfectly.

I replaced the DVD drive with a new Optiarc internal DVD writer. This new Optiarc has worked for about six months and then again same problem not reading and writing DVDs only.

Is the problem with the DVD writer or with the laptop? I am apprehensive to replace the DVD writer again.

By the way the OS is Windows XP professional.

A:Dell Vostro 1400 laptop internal DVD writer not reading/writing DVDs..

Normally it can be attributed to the laser burning out. The drive uses a different wavelength to do CDs than DVDs. They often don't burn out like a light bulb but just can't do the higher wavelengths.

Optical drives are notorious for sudden failure. On a desktop it's no big deal - a $20 repair. But a laptop is expensive to do replacements on. I'd be bumming too.

Curious (dealing with a similar issue with a laptop here):
When you go into Device Manager and check the properties of that Optiarc drive, is the name 'garbled'?

Read other 8 answers
RELEVANCY SCORE 54.8

Hello! I have bought my new dvd writer drive, but I have problem with writing dvd's on it, it can't open blank dvd's and write to them media, but it can only open already disks, thta have some files on them. I am a lil bit confused, plus I got another simple cd rom writer, connected to same ide cable, maybe i should disable it and leave only this new dvd rom driver, I have read help on my Windows xp Proffessional home center, and there was said, thta i must disable recording on dvd-ram drive, i did it, but now, when i try to open blank dvd disk, it says inccorrect operation, can any1 give me advice? My dvd wrier drive is Optiarc 7170A and i got those latest drives, plz give me some advise, I am totally confused Thx
 

A:Solved: Problem writing dvd disks on new dvd writing drive

Read other 8 answers
RELEVANCY SCORE 53.2

I Have a HP Dv 6451 Laptop with Vista ultimate 64 bit OS
TSST Corp CD/DVDW TS-L632M ATA Device
Driver installed is 6.0.6002.18005 according to driver update driver is the latest
I can rip CD's I have previously burned with this drive, play CD's commercial and CD's I have previously burned with this drive, & play dvd's I have bought.
I am unable to write/burn any CD.'s data or music. I have tried using media player, itunes, explorer, & nero. I have uninstalled nero & itunes. I am under the assumption I can not uninstall media player since it's built into vista.
All software goes through the motions of writing no error messages but when I try to read /play the CD nothing is there.
What I need to figure out is if my device is beat or do I have a software/driver issue ?
Any help would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 47.2

Hi,

I tried to burn an audio cd the other night using neo, i got an error whilst it was trying to burn, i cant remember wha the error was but i tried to burn another cd, this time the completed bit went upto 6% then decided not to do anything, i left it for a while and i ended up having to ctrl,alt+ del the task, then it just jung up, and it wudnt eject the cd when i pressed the button, so i had to end up restarting the computer. It has now done this about 3/4 times.

Ive just tried to copy a game to see if it would allow me to do that, but i get an error saying, Unrecoverable Read Error, then the name of my dvd reader, then error reading data.

Does anyone have any suggestions or shud i be looking at taking the computer back.

Thanks in advance.
 

A:CD Re-Writer / Dvd Writer Problem

I burnt a data cd before and that burnt with no problems at all, i then tried to burn an audio cd after this, but yet again it failed.
 

Read other 3 answers
RELEVANCY SCORE 44

I have a Dell 8100 XPS and when the hard drive went, I restored from an August backup (using Microsoft's Windows 10 backup) afetr replacing the drive. Unfortunately, I had a problem with the Ethernet adapter so eventually, I reinstalled Windows 10 fresh. The only major problem is that the machine recognizes the drive ( Liteon iHOS104) as a reader.

This is possibly because the 8100 does not officially support Windows 10 (according to Dell).

Is there any way to get it recognized as a writer?

A:CD/DVD Writer/BD Reader Not Recognized as Writer By Dell 8100

Try this:
Solved DVD drive missing - Windows 10 Forums

and this:
[FIX] Optical Drives (CD/DVD) Icon Not Showing in My Computer Window - AskVG

Read other 0 answers
RELEVANCY SCORE 44

I'm trying to figure out the best way to permanently delete Microsoft Office Document Image Writer & Microsoft XPS Document Writer. Getting rid of them once doesn't seem to be enough, as they always reappear. I guess Windows Update brings them back. I've found a couple of vbs lines that can be added to the login script, but they involve running prnmngr.vbs, which is apparently very long and can cause system delays. Maybe there's something simpler?

If this has been covered before, I'm sorry to repeat it. I did some forum searches and came up empty. Thanks for your time!

Read other answers
RELEVANCY SCORE 42.8

Hi

I have got a Benq Cd writer(20*10*40). My problem is I am unable to write data Cd's (data from harddisk) of more than 650MB capacity even though the Cd's I use are of 700MB. If I do write the Cd gets damaged. For CD to CD writing I am able to write.

I use Nero 5.5.3 original version ( I have even checked its settings but there was no use) & windows Xp writing software. This problem also had started recently and also only for data CD's and not for audio CD's.

I have got a Pentim 4 system with Windows Xp. 40 GB hard disk and 256MB RAM.
 

A:Cd writing problem

You may need a firmware upgrade for your CD drive, and I'd cruise over to Nero's website and download the update to the current version of Nero, it should be free.
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hi

I run a Pentium 4 with XP Professional. It came with Roxio Easy CD Creator 5.2 installed but I've never got around to using Roxio. I can play music CDs OK via Windows Media Player.

Realised I should be backing up my HD and tried to backup onto a CD-R with no joy so tried a CD-RW - no joy. Went and bought new CD-RWs in case the disks were at fault but still no joy.

Eventually found out that the Roxio version that I have can't be used on XP Professional so downloaded Nero 7 Demo. Still getting same messages.

When I try to copy I get a couple of different messages:
"Buffer underrun protection activated" and shows Type of disk in recorder: Empty
"Waiting for disc - Please insert disk to write to"

And previously got "Unrecognised data" and "insufficient space left" but it's a blank disk.

I've tried using Nero to do a quick erase but the Erase option isn't highlighted so can't.

I'm obviously missing something really basic ... anyone any ideas? I've attached aerror log in case this is of help.

Also, do I have to format all new disks before using and, if so, anyone know how to format using Nero 7 demo?

Many thanks.

1C83-7613-10E5-477X-4022-6KM5-4KC2

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, ... Read more

A:Problem Writing To Cd-r Or Cd-rw

Hi Denise. Roxio and Nero don't like to cohabitate (I found out the hard way). Uninstall both of them for the time being.Download and run XP_CD-DVD-Fix.zip and unzip the contents. Run the EXE file. Reinstall Nero. If this doesn't work you could try using an inexpensive optical drive cleaning disk available at large retailers and computer shops.---------------------------There are 2 ways to store data on a RW disk. The first way is to burn to it like it is a CD-R and then erase the whole disc to reuse it. The other way is to use Nero's InCD driver to format the CD-RW. This will allow you to treat the disc as a 500MB removeable disc in which you can add and remove files and folders in Explorer as if it was a gigantic floppy. Only computers running InCD will be able to write to the disc.

Read other 1 answers
RELEVANCY SCORE 42.8

i have a p-III machine....till some days back the system was working fine....but now when i am trying to write a cd its showing methat the cd was successfully created but when i check the cd its still blank....
the writer is samsung 48x16x48
 

Read other answers
RELEVANCY SCORE 42.8

I searched here and there a lot and still wondering is it a problem with sp3 or the dvd rw driver which mine is SONY DVD RW DRU 830A or it is a problem pertaining to the softwares that I use kike NERO, DVD Shrink. At present none of the copying and burning softwares cannot write in dvd driver.

A:XP SP3 and writing problem in DVD RW

It is XP SP3 that is causing your problem. I have a Sony DRU 710A that stopped working after I installed XP SP3. It would not recognize any blank DVD media with Roxio or Nero. I pulled the drive out and put it in another machine that only had XP SP1 installed. The drive worked great. I then installed SP3 and the drive quit working again. I then uninstalled SP3 and the drive started working again. Microsoft needs to fix this problem. I hope someone can put enough pressure on them to fix this issue.

Read other 3 answers
RELEVANCY SCORE 42.8

My supervisor has a laptop with a removable cd-rom, Compaq cd-rom CRN-8245B. He has used it to burn CD's in the past, and it has stopped writing discs. A blank disc says, "Cannot copy files: Files on this CD-Rom are read-only. You cannot copy or move files to this CD-Rom drive." when try to copy files to it. Has it quit working, it still reads discs, any suggestions? Thanks.
 

A:Cd writing problem

The CRN-8245B is only a CD-ROM drive not a CD-R/RW drive. Is that the correct model number or do you have another drive?
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hello. Yesterday i decided to back up my games. I started to write my on dvds but i couldnt write the 2. dvd! Now i cant write any dvds (i m using ms's own software to write)!
Pls help me! There is a problem sth like this: 0x8007045d.
Thanks. My system is writin on my profile.
 

A:Dvd Writing Problem??

Read other 12 answers
RELEVANCY SCORE 42.8

I have a problem with an LG SuperMulti 22x drive. All the dvds i try to write with Windows 7 built in software fails when there is roughly 30s left of the burn.

I tries Nero as well but the writes also fail. It is a brand new drive, is there any way to test it? I installed Windows and device drivers using it and it seemed to work fine.

Any ideas?

A:DVD Writing problem

Hi - have you AHCI enabled in the bios? If so it could be the driver Microsoft installs automatically during install - to fix this go to the below site and download and install the Intel Rapid Storage Technology Driver if you haven't already installed it.
I think its updated with the chipset drivers now, so you could update them firstly, and see if that fixes the problem if not install the rapid storage driver - available on the same support page below.

ASUSTeK Computer Inc. -Support- Drivers and Download P8P67 PRO

You could try this microsoft fix if you have the rapid storage driver already installed assuming its suitable :

Your CD or DVD drive can't read or write media

Read other 1 answers
RELEVANCY SCORE 42.8

Sir my HP 241 G 1 notebook pc automatically writes on search box,it also happens in word documents.When i check windows event viewer it writes " The device sent an in correct response following keyboard reset."  sir please help me!

Read other answers
RELEVANCY SCORE 42.8

Hey techguys,

I'm trying to help my sister with a problem she's having with writing CDs. I drag the files to the CD drive and they appear in that drive's folder fine, but when I try to press the 'Write these files to CD' button I just get a bleeping sound.

I've used this process on my laptop multiple times and have had no problems with it.

Her laptop is an HP Pavillion dv8372ea

Cheers
 

A:CD Writing Problem

Read other 13 answers
RELEVANCY SCORE 42.8

I went to burn a cd and my burning program worked fine, supposedly. Uh-huh.
I went to play it, as a double check, and I got 15 -20 seconds of each song on every track and that was it.
I have two cd/dvd drives, different mfgrs. with the same results from either.
I can listen to or rip cd's, no problem but I've tried 4 different cd burners and get the same crappy results.
Is it time to trash BOTH of my CD/DVD drives, Update my already updated drivers, or give my endoctronial systems a ballpeen massage?

A:Problem with cd writing

System manufacturer and model?

What program was used to burn the CDs?

Louis

Read other 1 answers
RELEVANCY SCORE 42.8

Hi,

I have a Blue-Ray Drive on my HP-G70 120. I am running on WIndows 7. Recently, my blue-ray drive has been disturbing a lot. I wrote to CDs and DVDs before, and it worked fine. Also, I can read from the discs, so I dont think there is a problem with the laser, rather I suspect some problem with the software.

My Problems are:
Clicking on the drive icon says its a blank disc, though the disc is not.
While at other times, ejecting the drive from windows or from the button says "An error occurred while ejecting BD-ROM". At other times it ejects fine.
I burned some files onto a CD that already had 80MB written on it, using BurnAware. Now, after burning, only the previous (80MB) are present there, but no sign of the newest write. Also, it shows "0 bytes free of 80MB" when clicking properties on the drive icon in Windows Explorer.


So How do I fix these problems?


Thank You
 

A:Problem with DVD writing

http://www.techspot.com/community/topics/cannot-burn-discs.184963/

Please refrain from posting duplicate threads.

Which software are you using?
 

Read other 2 answers
RELEVANCY SCORE 42.8

hi guys/girls

i am having a problem with my laptop (HP Pavilion dv2000 )

my problem is when i switch on my laptop after hibernating it , the keyboard starts to write different letters than it was shown in the buttons , to solve this problem i have to restart it or hold (FN) button while writing .

thats all thanks ;)

A:writing problem

You might want to try installing any updated drivers from the HP website.

http://h10025.www1.hp.com/ewfrf/wc/s...roduct=1817074

That is a direct link for drivers for your FN keys. Try it and let me know how it works.

How long has the problem been occurring? If it just started happening, you may try to do a system restore. Make sure all of your personal files are backed up just in case of an error.

Read other 7 answers
RELEVANCY SCORE 42.8

Just recently, when i try to copy a cd i get static, it is not on the original.....i have slowed the write speed down and no other programs are running, i am using clonecd which until now has been superb
Please help!!

Steve
 

A:CD writing problem....PLZ help

Have you tried re-installing software?
Or trying another burner software altogether to see if its the software or the drive itself?
 

Read other 3 answers
RELEVANCY SCORE 42.8

I'm looking for help with a problem getting my DVD writer to recognise blank DVDs.

I can read and write CDs no problem and the drive will read already written DVDs(films,software etc). However when I insert a blank DVD the drive just keeps trying to access(green light on drive keeps flashing and drive is spinning) the DVD.

I am using DVD+R discs and have never had a problem in the past.

The drive is an Emprex 16X dual layer reader/writer. I have run the driver update and apparently the drivers are the most recent.

It may something simple or the drive might be just broken, but any help, advice or info would be much appreciated.

Thanks in advance.
 

A:DVD writing problem

Replace the drive, they do go bad just like this...
 

Read other 2 answers
RELEVANCY SCORE 42.8

THE POINTER OF MOUSE  AFTER 10 [s]  MOVES IN ANOTHER WINDOW OR STOPPED IT DURING THE WRITNG AND THE PROBLEM IS I LOST CHARACTER DURING THE WRITING. IT IS A PROBLEM FOR DIGIT THE PASSWORD OR DOCUMENT. I clear the register, I change the mouse and the keyboard but nothing to do. During the start up I feel 4 short beep but I don't know what to do. Thanks for help 

Read other answers
RELEVANCY SCORE 42.8

THE POINTER OF MOUSE  AFTER 10 [s]  MOVES IN ANOTHER WINDOW OR STOPPED IT DURING THE WRITNG AND THE PROBLEM IS I LOST CHARACTER DURING THE WRITING. IT IS A PROBLEM FOR DIGIT THE PASSWORD OR DOCUMENT. I clear the register, I change the mouse and the keyboard but nothing to do. During the start up I feel 4 short beep but I don't know what to do. Thanks for help 

Read other answers
RELEVANCY SCORE 42.4

Hello everyone. Just registered in this forum today and expecting to have a reply to my problem. I have Toshiba Qosmio E15-AV101, whose detailed specifications are mentioned here. For one year, I am being successfully writing to DVD+R disc without any sort of problem using Nero. However, I had a HDD crash recently and had to redo everything. Now the strange problem I have facing is that I can write to DVD-R, but cannot write to DVD+R or CD-R.

Using Nero as my burner, this is the error report I get while trying to burn my files to DVD+R :

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/18/2003 1:25:04 AM
Nero version: 6.0.0.9 (Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-830S>Version: 1.00 - HA 1 TA 0 - 6.0.0.9
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <MATSHITA DVD-RAM UJ-830S >Version: 1.00 - HA 1 TA 0 - 6.0.0.9
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HM120JC atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-830S atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Ph... Read more

A:Solved: Writing on DVD+R problem, DVD-R is ok.

Read other 9 answers
RELEVANCY SCORE 42.4

The error message while burning the CD is as follows:

"
Admin
1A23-0009-4030-2409-0769-1046
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <TSSTcorp CDW/DVD SH-M522C>Version: TS08 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDW/DVD SH-M522C>Version: TS08 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CDW/DVD SH-M522C atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3160211AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CDW/DVD SH-M522C I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1013MB (1037816kB)
Free physical memory: 409MB (419388kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.5.2009
CD-ROM (ISO)
12:27:16 PM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 ... Read more

Read other answers
RELEVANCY SCORE 42.4

Hi everyone, I have an HP compaq nx6110 laptop. I have just recently installed Windows 7 on it and everything works fine so far but when i try to write files to a cd with windows dvd maker that comes with windows 7, it tells me that "The video card installed on this computer doesn't meet the minimum system requirements for Windows DVD Maker." What should I do? I have an Intel 915GM. Thanks for your help in advance. Glad to have a Windows 7 forum.

A:Help with windows 7 CD Writing problem.

There's no video driver for Vista or 7 so it seems you're out of luck.

http://downloadcenter.intel.com/Sear....aspx?lang=eng

Read other 6 answers
RELEVANCY SCORE 42.4

Hello,

I have a problem with MS CD Writing Wizard with Windows XP, SP2.

When I try to burn a CD with the option "Automatically eject the CD after
writing" the wizard burns the CD and ejects it. Then, when I try to add
some new files to the CD and burn it again, the wizard doesn't recognizes
the disc (after inserting). Then I need to login again to make the wizard
see my CD and burn the files.

When I turn off that option - everything is all right - even if I manually
pull out the CD and put it again, the wizard recognizes the CD and
burns the files properly.

What can cause this problem ?

Regards,
Marcin

A:Problem with CD Writing Wizard

Well, from my experience with Windows' built-in burner software it has been hit or miss. I now use Nero for burns that work all the time, any time. There is a free burning program that is allmost as good as Nero, and far better than XP's buring wizzard called:

CDBurnerXPPro
http://cdburnerxp.se/

Good luck...

Read other 1 answers
RELEVANCY SCORE 42.4

hi guys i have encountered with a problem while writing a DVD(data) with NERO

i was not able to change the speed of the DVD writing with nero 6(i even tried 7 n 9) the max speed of writing was always 12x..along with 2x,4x,8x being shown. it shows tht 12x is the maximum... so when i write data in DVD the process starts reaches 1% and a failure message is shown..n the process stops.
i even tried writing at different speeds like 8x.when i started the process its the same result the process was a failure. now the writing speed options are limited to 8x,4x,2x..i wonder where the 12x option has gone!!!!

Please help me guys!!!
 

Read other answers
RELEVANCY SCORE 42.4

Hi,
I have a problem writing backup dvds
When i put in a empty dvd my computer doesn't regonize it, it just says that there's no cd.

plz help
 

A:Problem writing backup dvd;s

Welcome to Techspot.

There are a lot of things that can do that.However, we need a bit more information;
Fill in the hardware specs on your computer in "your Profile"
Tell us what O/S and writing software you are using ,include version.
Write any error messages you may receive.
whether you always had the problem or is software new.

You will get a lot more help,faster!
 

Read other 8 answers
RELEVANCY SCORE 42.4

XP CD writing wizard writes files to CD. I get the message 'Your files have been successfully written to the CD'. The tray opens upon completion. When I close everything out an try to read CD contents from Windows Explorer it shows empty! I have tried the trouble shooter, I have uninstalled and reinstalled the CD driver all to no avail. When I burn files to the CD from Nero Express everything works fine. After this burn I can read the file OK from Windows Explorer. What gives? Am at my wits end. Any help appreciated.

Jim
 

A:cd writing wizard problem

Then, why can't you use Nero Express? Sometimes. when more than one burning software is installed, their drivers conflict.

Have you installed any other CD or DVD software? Have you uninstalled any?
 

Read other 3 answers
RELEVANCY SCORE 42.4

I believe I have a virus on my PC. There were 100's up popups all over my screen. The day prior I had removed Norton Internet Security, installed Zone Alarm.. and had intended to return the following day and install Avast. but.. unfortunately I didn't get to before this happened.

I'm able to boot up in safe mode and tried a system restore to the prior day (to the problem) but upon rebooting my screen went black after the windows loading screen. Now, I guess system restore doesn't solve problems like this, but in the past it'd fixed anything I'd done before.

Rebooted again into safe mode and all my files are there. Is there a way to copy files in safe mode to dvd or cd? or fix the problem?

If I have to reinstall the OS, I must retrieve some pictures that hadn't been backed up.

Any advice or assistance would be appreciated.

A:Help with writing files to DVD/CD because of problem.

follow the 5 steps here
http://www.techsupportforum.com/showthread.php?t=15968
it may enable you to avoid the reinstall

Read other 3 answers
RELEVANCY SCORE 42.4

I have an OPTORITE 48x16x48 CD-RW drive, CW4802, running Win ME. It seems to write to CD-Rs and CD-RWs that are the regular density 650MB, 74 minute types. However, it balks a lot and gives me a generic error telling me the media is damaged or has scratches or the software is bad, etc. whenever I use 700MB CD-RWs.

I updated the firmware to the latest version, but it wasn't far behind anyway.

I am using new (never written to) Memorex disks. Any tips or fixes on how to overcome this problem would be appreciated.
 

A:Problem writing to 700Mb CD-RW

rwmfsu
This may not pertain to your problem but have you tried lowering the write speed down a bit? I find that some CD's within the memorex line and TDK line even thought they say 48x compatable or Multi Speed they balk at 700's. Another thought would be to hold your storage down to 650 to 675MB vs all of the 700.

Just some thoughts.

Dave
 

Read other 1 answers
RELEVANCY SCORE 42.4

I installed a used TDK (24/10/40) CD drive in my Dimension 8100 machine and then installed the Nero 5.9x version with InCD. Once in, my CD wouldn't read/recognize other discs, not even commercial text discs. It only recognized InCD formatted CD-RW discs. I uninstalled Nero but now my CD ejects any disc except the specially formatted InCD discs. I've run System Mechanic (a registry repair tool), I've checked the device manager and the system information but cannot find anything that works.I installed a used TDK (24/10/40) CD drive in my Dimension 8100 machine and then installed the Nero 5.9x version with InCD. Once in, my CD wouldn't read/recognize other discs, not even commercial text discs. It only recognized InCD formatted CD-RW discs. I uninstalled Nero but now my CD ejects any disc except the specially formatted InCD discs. I've run System Mechanic (a registry repair tool), I've checked the device manager and the system information but cannot find anything that works. Does anyone have any ideas?
K. Shane
 

A:CD and packet writing problem

Read other 8 answers
RELEVANCY SCORE 42.4

Hi,

When I'm writing some data to dvd, then my computer was showing that,

"Windows cannot copy this file. Tell me what windows want to do?"

It's could be simple problem but solve me. It's irritating me.

A:Problem writing data to dvd

Hello samrat and welcome to TSF !

We'll need more informations. What kind of data are you trying to write ? Did you make sure the file wasn't too big to hold on a DVD ? Were you able to burn other DVD's properly ?

What's the brand and model of the DVD writer and what burning program do you use ?

Read other 4 answers
RELEVANCY SCORE 42.4

Thanks in advance for help someone might offer!

I have a hunch my secondary drive is dying (been with me through 2 systems/5+ years) and would like to move all the data from it to a CD. Using Easy CD Creator it tells me something about the data being written too fast so it could not be written to the CD.

Any idea that I have a CD/RW problem or something else? I replaced the power supply last night hoping the terrible loud noise would go away (didn't - must be the hard drive), and will try the CD write again this afternoon. But I thought someone might have another idea for me in case this doesn't work.

Happy Saturday!
 

A:CD/RW problem - writing too fast?

the horrible loud noise is likely a fan clogged with dust and chattering, though it could be the HDD and if it is, you should attend to it before you lose everything.

As for the CDRW, try burning at slower speeds, also check the cables, disconnect them and reconnect them to make certain they have proper connection. Might also be a buffering problem, or it could be a problem with the burning app.
 

Read other 3 answers
RELEVANCY SCORE 42.4

hi im having trouble writing at 4 speed with nero i can write at 1-2-6 and 8 speed but everytime i try 4 speed it fails i have tried different media thinking that was the problem i have a log file of nero and hijackthis if anyone can shed some light on it for me thanks in advance


nero log file
Keith
Home
1A23-90C1-M090-2253-1804-8551
4A23-60C1-M040-2749-0900-5770

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.21 - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-107D>Version: 1.21 - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-107D D: CDRom0
LITE-ON LTR-52327S E: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 437MB (447612k... Read more

A:problem writing at 4 speed

Is your internet called Friendly?
 

Read other 3 answers
RELEVANCY SCORE 42.4

Last week I was able to burn music to my CD's but this week I tried burning a CD. It started burning...it was on the first song....but then it stopped and the CD came out and the computer said "Problem writing to the disc"...they are the same discs I used last week and are all blank....I dont know whats wrong...
 

Read other answers
RELEVANCY SCORE 42.4

Hi folks

I have a horrible problem which is doing my tit in.

I just brought a pioneer dvr109. In the Uk this drive has received good reviews so i decided to buy it. I brought an oem version of dabs.com.

Now when i received this it had a fireware already on which was version 1.19 and i looked on pioneers website and there was another firmware update which was 1.40 which was only released in march. so i updated and it hasnt seemed to have sorted problem out.

The DVD rewriting side seems to be fine.

but for cd-rs i am having problems.

I use TDK cdr80 disks which can burn up to 52X. now i know my drive will only burn up to 40X which is fine, but when i used nero, which is version. 6.0.0.20. I can only burn at 4X.

does anyone know why this is.

I thought problems like these sorted them selves out with firmware, but i dont think it has.

I have tried the same brand but with numerious disks and have had no luck. b4 i did the update i was also using infiniti cdr-80 disks on a spindle. and these would burn up to 32X. but since the update these will only burn at 4X.

can anyone help, is there any issue with this drive, is it my nero version?

any help will be greatly appreciated.

Thanks.
 

A:Pioneer DVr-109 writing Problem

Read other 12 answers