Over 1 million tech questions and answers.

BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc

Q: BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc

I just built a brand new system and to my dismay have have several bsod's. I believe I have all the up to date drivers, and have tried running memtest86+, but found no errors. I've run a disc check, and also run sfc /scannow 3 times. I've run driver Verify. Still having bsod's so it's probably a driver issue right?

System Specs:
Microsoft Windows 7 Home Premium 64-bit
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
ASRock Z68 Extreme3 Gen3
BIOS Date: 11/22/11 11:12:52 Ver: 04.06.04
Seagate 1TB HDD
NVIDIA GeForce GTX 560 Ti
CORSAIR Vengeance 8gb DDR3

I've had some windows updates that fail to install. One of which is sp1. I've tried using the system update readiness tool provided by MS Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011] - Microsoft Download Center - Confirmation, which sucessfully installed the hotfix, but sp1 still wouldn't install. I followed MS's instructions to insert my win7 disk and install win7 as an upgrade with updates installed from the internet, but still have some bsod's

I'm also not sure if it's worth noting that my libraries are no longer working, see attached jpg.

I've attached my dmp files from before the win7 upgrade, and after. I would be grateful for any help.

RELEVANCY SCORE 200
Preferred Solution: BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc

When I get home from work I'm going to try seating the ram in different mobo slots and try them out individually. If that doesn't work I'm going to try a clean windows install on another HDD I have. I'll post afterwords.

Read other 9 answers
RELEVANCY SCORE 106.8

I've attached the zip file of dumps from BSOD.

This is on my sisters computers which I can only access remotely.

Specs as follows:
Rosewill R363-M Case with PSU
Biostar A75MG FM1 Mobo
AMD A6-3500 Llano CPU
Partiot Gamer 2 Series 8GB (2x4GB)
OCZ Vertex Pus R2 60GB SSD
LG DVD BUrner
Windows 7 x64 with SP1 installed

Any help is appreciated.

A:BSOD - Random Usage - multiple error codes - 0x0000003b

Start with testing RAM.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes. *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot. *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot. *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, ... Read more

Read other 3 answers
RELEVANCY SCORE 105.6

Hello, and thanks for trying to help with this. I am having issues with several crashes, and one thing is constant. It only happens when graphics are involved. My pc crashes on games such as LoL, CoD:BO 1 and 2, Minecraft, and (for that random variable) Grim Fandango Remastered. I get 0x0000003B, 0x1000007e, and 0x00000109. If there was audio playing, it usually bugs out the speakers.

Only recently (as of the date of this thread) has something stranger occurred. 0x0000003B happened, but the audio looped back on the last 10 seconds of music playing. Attached is the crash report. Again, thanks for any help

Read other answers
RELEVANCY SCORE 97.6

I recently upgrade my computer from Windows 7 Pro 32 bit to Windows 7 Pro 64 bit; so I'm pretty sure my issues are somewhat driver based.

Most of the time the BSOD's happen randomly; though some of the times are when launching games.

I'm a novice at understanding/interpreting the dump files so help is greatly appreciated.

The dmp files are attached! If you need any more info, let me know.

Thanks in advance!

Edit: Ran Windows in SafeMode for about an hour or two. Ran fine without any crashes.

A:Random BSOD, multiple error codes, error ntoskrnl.exe

Still having this problem. I uninstalled adn reinstalled all my drivers. I ran chkdsk (There was a few corruption, but they've been fixed). I ran Seatools - all tests passed. I have no idea what else to try. Any suggestions?

Read other 1 answers
RELEVANCY SCORE 96

ok, so, i am having alot of random bsod's, here is the dump file, if anyone can help, would appreciate it

A:BSOD error 0x0000003b & 0x00000024

Code:
fffff880`0797d2a8 fffff880`02a974dcUnable to load image mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0x704dc

Code:
fffff880`0797c9b0 fffff880`03941bc0Unable to load image mfencbdc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfencbdc.sys
*** ERROR: Module load completed but symbols could not be loaded for mfencbdc.sys
mfencbdc+0x53bc0

Code:
Host Name: NEO-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Neo
Registered Organization:
Product ID: 00426-OEM-8992662-00006
Uninstall Macfee completely. Purchase and install a genuine Windows 7.

Read other 1 answers
RELEVANCY SCORE 94.8

Good evening you fine and bright folks,

I have a custom build PC that has been plagued with BSOD at seeming odd points. Two that I've notice are reoccurring at at system wake up, and closing a program (ie Chrome). However, sometimes I'll get a BSOD while playing a video game, but can't reproduce the error.

Thank you for the help,

Burger

A:BSOD, no one specific error. 0x0000003b, 0x00000024, and more!

Hi imBurger.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. That will decide the further course of action.
______________________________________________

Code:
BugCheck 19, {3, fffffa80082c0110, fffffa80082c0110, fffffb80082c0110}

Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+140b )

Followup: MachineOwner
---------

Code:
BugCheck 3B, {c0000005, fffff800032a253c, fffff8800591af00, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )

Followup: MachineOwner
---------

Read other 9 answers
RELEVANCY SCORE 94.8

Greetings,
I am new to the forum. Recently i have installed windows 7 ultimate sp1 and since then have been experiencing random BSOD ( cant give u a precise number but more than 10+ in 6 days time ). I would have uploaded the dmp files from every bsod i enountered so far but i only recently set windows to save dmp files. The error for every Bsod so far has been the same 0x0000003b except for the last one which is 0x00000024. The bsod seems to occur randomly while i am on my desktop ( never while i am in games) and sometimes durring start up. I tried to solve the problem my self but i dont know much about windows 7. I hope someone will be able to help me since i am very close to go back to xp

A:Random BSOD error 0x0000003b and 0x00000024

Welcome to SevenForums

Before installing Windows 7 did you run the upgrade adviser?Windows 7 Upgrade Advisor - Download - Microsoft Windows
Code:
Start Menu\Programs\AVG Public:Start Menu\Programs\AVG Public
fffff880`084139d8 fffff880`040f6c78Unable to load image \SystemRoot\system32\DRIVERS\avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
avgidsdrivera+0xdc78
AVG antivirus is contributing in these BSOD-s and is often a cause of BSOD-s itself. Suggest you to uninstall it and use Microsoft Security Essentials at least to test.AVG | Download tools and utilities
Microsoft Security Essentials - Microsoft Windows
Code:
Start Menu\Programs\Spybot - Search & Destroy Public:Start Menu\Programs\Spybot - Search & Destroy Public
Spybot S&D is not the best protection software. It can slow down & corrupt the system.

You may keep the free version of Malware bytes which is a great combination with MSE.How to uninstall | Spybot ?
Removing Spybot - Safer-Networking ForumsLook for an update on the BIOS version.

Code:
BIOS Version/Date Award Software International, Inc. F10, 31.8.2009
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checke... Read more

Read other 9 answers
RELEVANCY SCORE 88.4

I've been having random BSOD and although I suspect the Logitech USB mic is part of it, it seems to happen out of nowhere with bug codes like 0x00000019, 0x000000a, 0x0000018, and 0x000001e. It can happy a few times a day and it's getting really frustrating trying to figure this out. I am sure I updated all of my drivers, and I was wondering if anyone could help pinpoint exactly what is really causing it.

A:BSOD with ntoskrnl. Multiple codes but same source

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {28, 2, 0, fffff800032d6cd0}

Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )

Followup: MachineOwner
---------
Lets check RAM first. Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Reference:
RAM - Test with Memtest86+

Read other 1 answers
RELEVANCY SCORE 87.2

Hi Team
I've recently started getting various crashes & BSOD's whilst playing ARMA 3 (and on one occasion while running prime 95)
The errors have ranged from STATUS_ACCESS_VIOLATION 0xc0000005 errors which crashed me to the desktop to BSOD crashes with the following codes:-
0x0000001a
0x00000101
0x00000124
0x00000050

The constant thing linking all of the BSOD's is that ntoskrnl.exe is given as the driver or address causing the error (along with atikmdag.sys & hal.dll in a couple of cases)
As the collected wisdom of Professor Google points to causes as diverse as hardware failure, bad drivers & overheating I though I would ask here in the hope of getting sage & reliable wisdom!

I have read the pre posting guidelines & have attached the DM log collector findings & the information provided by Bluescreen View.
Hopefully my system specs will appear alongside this post but just in case:-
Custom built pc
ASUS P8Z77-M PRO (LGA1155)
Intel Core i5 3570K @ 3.40GHz
GSKILL Ripjaws f3 12800 ddr3 8GB RAM
AMD Radeon HD 7800 2GB
OCZ 80GB solid state system disk
2 x 930GB Hitachi HDD in RAID 0 config for data

Read other answers
RELEVANCY SCORE 86.4

Hello,

A couple weeks ago i bought a brand new notebook (a Lenovo G470, running Windows 7 Home Premium x64 ) and a few days ago, it started BSOD'ing, to the point that it was impossible to use the computer because the BSOD happened almost every time.
The BSOD all had random error codes and almost always were because of ntoskrnl.exe, one time fltmgr.sys and another time fileinfo.sys (i think), according to bluescreenview.

I ran memtest for 2 passes and it right on the beginning it found like 400.000 errors.

I called Lenovo support and they told me to format the computer using Lenovo's system partiton. After the format, i just left the pc running idle and, after a while, it BSOD again.

Booting in safe mode did not give BSOD. I also ran Ubuntu 10.04 via Live USB and did not have any crashes. In Ubuntu, i left the computer running multiple 1080p mkv movies in loop for half a day and also opened dozens of programs at once to try and stress the system, and no crashes. Temperature was normal.

After that, i ran:
Memtest - No errors (the 400k errors found before dont appear anymore)
Prime95 for a few hours - No errors/crashes
Furmark - No errors/crashes, temperatures ok
Seatools (Seagate HD Diagnostics) - No errors/crashes
Lenovo's LSC Lite HD and Memory diagnostics - No errors/crashes

Even with all those tests, i still got a few BSOD later.
So, i was thinking that maybe the Lenovo's recovery system had a corrupted windows installation (or there was a confli... Read more

A:Random BSOD, multiple codes - ntoskrnl.exe, fltmgr.sys, Ntfs.sys

Almost impossible to diagnose a problem from a single DMP. There is no way to spot trends, etc. If this DMP is from the final re-install, and is supposed clean there are BT drivers, etc.

I am a big fan of Nir Sofer's work, BUT blueScreenView more often than not, doesn't point out the correct causes. Similarly Who crashed is even worse.

I prefer to use WinDbg (the Windows Debugging Tools) to read the memory dumps. It is the Gold standard for those of us that do this and often will give us the answer by itself. (we don't need the full jcgriff2 report each time).

This crash was related to a memory exception (probably a driver). You need to run memtest for 6-8 continuous passes.

Also run verifier as indicated below.

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all s... Read more

Read other 8 answers
RELEVANCY SCORE 84.4

Hello

I am having random BSOD issues, just recently i download blue screen view
and at the top of the list it has ntoskrnl.exe that seemed to be causing the issue.

I will upload the minidump file if that makes things easier, besides that i don't know much else to report on, help is appreciated.

Thanks

A:Random BSOD error 0x0000003B ntoskrnl.exe

Yes it does make things easier, go ahead and post it
http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 84.4

Hello, I have been having this BSOD for about half a year now and I don't know why it is happening. It always happens when I'm gaming, not any other time, it recently happened during Deus Ex and before that a varied amount of times with games like Jagged Alliance 2 and Dark Messiah.

The good thing is that it doesn't happen often, but it definitely is getting annoying.

The thing that frightens me is that it may be a problem with my hardware, as I had reformatted my hard drive about three months ago and even after the reformat I still get BSODs. Now the truly puzzling thing about this is before the reformat, my BSODs, while still being caused by ntoskrnl.exe, were usually 0x24 NTFS_FILE_SYSTEM errors while now they are all 0x0000003b SYSTEM_SERVICE_EXCEPTION errors.

My processor is overclocked to 4.0ghz but it's stable and runs cool, and I don't think it would cause that type of error. My RAM is on default everything, stock voltage, 1600mhz, and manufacturer recommended timings. This BSOD has happened to me while and without my video card being overclocked (which is also stable -- to my knowledge) so this further confuses me on why this would happened.

I really don't understand, I don't see how it could be the software since I've been having BSODs before and after a total reformat. And I don't particularly like the idea of RMAing a component and being without a computer for 2-4 weeks.

Any help is appreciated.

A:ntoskrnl.exe BSOD error 0x0000003b when gaming

Welcome

ntkrnlmp.exe is not the true cause of your crash.
What antivirus are you using?

Please refrain from using 3rd party defrag programs.

Code:
Start Menu\Programs\Ableton\Live 8.2.2 Public:Start Menu\Programs\Ableton\Live 8.2.2 Public
Start Menu\Programs\Auslogics Public:Start Menu\Programs\Auslogics Public
Start Menu\Programs\Auslogics\Disk Defrag Public:Start Menu\Programs\Auslogics\Disk Defrag Public
Uninstall using revo uninstaller, use the inbuilt defrag program of windows 7. Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Disk Defragmenter - Open and Use

You should get the latest version of your graphic card drivers installed.

Code:
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6268, 360.00 KB (368,640 bytes), 7/27/2012 9:14 PM)
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall the ATI related stuff. Delete remnants of its driver using Driver Sweeper


Code:
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory
BugCheck 3B, {c000001d, fffff80002ecc3d6, fffff8800ab559b0, 0}
Probably caused by : ntkrnlmp.exe ( nt!ExpReleaseResourceForThreadLite+46 )
For bug check 24,
Code:
STOP 0x00000024: NTFS_FILE_SYSTEM
Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag progr... Read more

Read other 1 answers
RELEVANCY SCORE 84.4

I've had 2 BSODs within 20 minutes of eachother so I decided to fix this right away, the error is

SYSTEM_SERVICE_EXCEPTION
0x0000003b
ntoskrnl.exe+70600

If there is any additional info i need to post I'll try to get it I've neve rhad one of these, im currently running in safe mode though
Windows 7:
- x64
- Original OS
- OEM
- nearly a year
- nearly a year

A:BSOD(ntoskrnl.exe+70600) error 0x0000003b

> We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.




> The following actions might prevent an error like this from happening again:

* Download and install updates and device drivers for your computer from Windows Update.

* Scan ... Read more

Read other 3 answers
RELEVANCY SCORE 83.6

Hi
I recently started getting BSOD while on Youtube/chrome. No idea why, I've done the MemTest and driver verifier but nothing came up. Also, checked all updates and used Lenovo's official updater to check BIOS and drivers. Have noticed that Chrome has been using a lot more RAM since the last update and my videos were splicing and not loading recently. BSOD doesn't occur when I'm on Word/Excel etc. but that could be coincidence.

Google came up with something about 'Microsoft IEEE 1394 driver stack' and a hotfix but I am not sure what needs to be done.

I have previously got a BSOD when my RAM was faulty but that was easily checked and fixed with new RAM. Can't figure out what's wrong this time. I've got an ex-office laptop and I have used it a lot but it's been looked after, would hate to lose all my stuff on here.

Hope someone here can help.

A:BSOD on Youtube/Chrome, error ntoskrnl.exe 0x0000003b

I have been noticing Google Chrome does freeze up way more often. I had a BSOD here not long ago either, same file name different error code though.

Makes one wonder if its a Chrome issue or not.

Will let a pro pipe in on that though.

Read other 4 answers
RELEVANCY SCORE 83.6

Hey there,

Thanks in advance for the read and the support but for the life of me I cant find out what's causing this.

I recebtly built a custom rig and everything ran fine until I installed assassins creed V.

The only thing I can think of is maybe Direct x11 is causing this?

I've attached the zipped file from the DM log collector.

Thanks a bunch!

Kind regards
Marthinus Strydom

A:BSOD randomly, error 0x0000003b ntoskrnl.exe+71f00

Hello,


Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
DT have been known to cause problems in windows 7. Please uninstall.


Code:
Probably caused by : cdd.dll
I will be honest, I have never seen this one before, but I did some research, and it seems that it may be a RAM issue. So run a RAM - Test with Memtest86+ for atleast 8 passes!

Also lets run a SFC:





Quote:
Start > Run > CMD >Right Click and Run as administrator > SFC/ SCANNOW


Post back results!

-Gamer

Read other 1 answers
RELEVANCY SCORE 83.2

I am working on a relatively new machine that has been having random BSOD's since Sept last year for friend of mine. Generally from looking at the mini dump files there are about 6 a month occurrring. I have been trying to troubleshoot this PC for its owners since then and have hopefully ruled a few things out. The machine sits idle for a lot of the day and only Outlook, Powerpoint and Word are run occassionally throughout the day. Powerpoint would be the most used program. It synchronises files once a day with a WinXP machine.

I have tested RAM, but both Windows Memory Diagnostics & Memtest86+ haven't found any errors, I have also set the RAM settings specified by Corsair manually in the BIOS. I have also ran Chkdsk multiple times with no errors. Also have ran sfc /scannow with no problems reported.

Today for the first time I did see a windows error that stated "desktop manager has stopped working", and was then followed by a BSOD 0x00000024.

Most of the errors lately have been;
0x00000024 - NTFS_FILE_SYSTEM
0x0000003b - SYSTEM_SERVICE_EXCEPTION
0x0000004e - PFN_LIST_CORRUPT
0x00000050 - PAGE_FAULT_IN_NONPAGED_AREA
but there have been these right from delivery of the machine when new;
0x00000109 -
0x0000001e - KMODE_EXCEPTION_NOT_HANDLED

The machine was built by a local computer business (who have said it's software related and not their problem) and the specs are;
Gigabyte GA-A75M-UD2H MB,
AMD X4 A8-3850 APU
500W PSU, 1TB Spinpoint F3 7200rpm HDD - SA... Read more

A:Random BSOD's 0x00000024 and 0x0000003b

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

Make sure all Windows updates are installed.

You should also update any other drivers you can think of including graphics, audio, chipset etc.

What anti-virus are you using?

Read other 7 answers
RELEVANCY SCORE 82.8

This is a custom-built desktop system. I built it at the end of September and it has been running fine with no problems up until this month. Since the beginning of the month, it has BSODed 4 times: Dec. 2nd, Dec. 6th, Dec. 19th, and today (Dec. 22nd). Each time, using "BlueScreenView" it shows that the driver causing it was "ntoskrnl.exe" and the error code was: 0x0000003b (For the BSOD that happened today, Windows did not capture a minidump for some reason, so I can only speculate that it was the same error...)

There is no real consistency in what causes it. The screen will just randomly "mess up" with kaleidoscopic distortion, any sound playing will stutter, and then the system crashes to a BSOD. I have installed no new hardware since I built the computer. The last two programs I installed before this began were Skyrim (Nov. 28th) and CDBurnerXP (Nov. 26th). It's hard for me to see how either of these could be the culprit, since it has never BSODed while they were running.

My only "guess" as to what might cause it is a partitioning issue. When I first installed Win7, it took up the whole disk (1 TB) with one partition. Later, I created separate OS and DATA partitions. However, the Windows disk management utility did not allow me to create the OS partition of the size I wanted, it limited me to something like 400 GB. I used GParted on an Unbuntu live USB to make the partitions I desired (250 GB OS and 750 GB DATA). I think this ... Read more

A:BSOD occurring at random in ntoskrnl.exe, error code: 0x0000003b

Driver Verifier returned something interesting. When I restarted, Windows initially failed to start, going to a BSOD I had never seen before: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION with an error code of 0x000000c1. When I next restarted, Windows ran startup recovery and asked me to restore to a restore point. After that, it started normally. For some reason, this BSOD also did not create a minidump.

Read other 9 answers
RELEVANCY SCORE 82.8

Hello

My computer BSOD about 9-10 times a day and it's quite annoying.
Here is what I tried:
1. Upgraded from windows 7 to windows 10
2. Ran memtest - RAM had about 30 problems but then I put the ram in another computer and ran the test there-> 0 errors
3. Updated GPU drivers
4. Ran scannow from command prompt ->no problems

I attached the minidump of one of the most common type of BSOD(by ntoskrnl.exe)

Can someone please identify the problem? Im clueless about BSOD. Thank you

A:ntoskrnl.exe causing BSOD at random times , error 0x0000003b

Hi SmithyBoy,

I'll go deeper on the memtest part.
Did you run memtest on each stick in each used slot separated from the other sticks?

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 0 answers
RELEVANCY SCORE 82

I am getting multiple BSOD daily. I reinstalled Windows and again the same problem.
Here are some brief details of my computer. It is a custom buit computer which I bought a year ago. The original OS Windows Ultimate 64.
Current OS Windows 7 Enterprise (x64) Service Pack 1 (build 7601)
Processor 2.80 gigahertz AMD Phenom II X6 1055T
Motherboard ASUSTeK Computer INC. M4A78T-E Rev 1.xx
Bios American Megatrends Inc. 3406 08/20/2010
Memory 8192 Megabytes Usable Installed Memory
Video Card AMD Radeon HD 6800 Series

Other details are in the attachement.

I have run memory and HD diagnostics they have come clear and also checked for malware using malwarebytes.
Any help in solving this will by appreciated.

Thanxs

A:BSOD 0x00000019, 0x00000024, 0x0000001e, 0x0000003b

Got a BSOD. Uploading the dmp file.

Read other 9 answers
RELEVANCY SCORE 82

The Computer: HP Pavilion dv7-6169nr. As far as I can tell it is a i4 1.4GHz with 2 GB ram and a 640 GB HDD. Integrated Graphics Card. Can't access much more info than that.

The Story: I am currently stationed in Biloxi, MS and a guy in my squadron found a couple laptops under his bed after he moved in. He gave me one because it had BSOD issues on startup. I figured a simple fresh install of Windows would do the trick.

First Problem: Loaded my boot disk image onto my USB and tried installing Windows 7 Ultimate x64 and tried booting to it. BSOD. Immediately went to BIOS setup and ran Memory, Start up, and Hard Disk tests. All passed.

Second Problem: Tried booting to Safe Mode to see if maybe it was the update issue I had read, BSOD again. Tried booting to Safe Mode Command Prompt. BSOD again. Started noting the different BSOD error codes and found these three showing up randomly: 0x0000007e, 0x00000024, 0x0000003b, and 0x0000001d. 7e being the most common.

Third Problem: Thought it might be registry problems, so I installed a brand new HDD never been opened. Installed Windows no problem. Got to Windows is Starting screen and BSOD. Did more tests and everything still checks out. If I try and start normally it gets to Setup Services loading or whatever screen and then BSOD and restarts.

I would like to provide more info, but cannot access memory dump files or anything as I can't get into Windows. I don't know what caused the issue in the first place as this is a... Read more

A:BSOD ons start up 0x0000003b, 0x0000007e, 0x00000024

bump, any help would be appreciated!

Read other 2 answers
RELEVANCY SCORE 80.4

While the system is at idle or just light use I get the BSOD. It happens once a day and there seems to be no trigger. Core temps are at normal and run about 40 Celsius. I have tried updating most of my drivers through the device manager and will run a memtest soon. Any and all help is much appreciated, thank you!

Is Windows 7 . . .
- x64
- the original installed OS on the system? windows 7
- an OEM or full retail version? full retail

- What is the age of system (hardware)? 1.5 yrs
- What is the age of OS installation (have you re-installed the OS?) 1.5 yrs. have not reinstalled OS

System Specs
CPU: AMD Phenom(tm) II X4 920 Processor
Motherboard: ASUSTeK Computer INC. M4A785-M
BIOS: BIOS Date: 04/14/10 17"53:51 Ver: 09.06
Total Memory: 4.00 GB
Usable: 3.75 GB
HDD: (1) ST31000520AS ATA Device (2) Seagate Portable USB Device
Sound Card: (1) ATI High Definition Audio Device (2) High Definition Audio Device (3) C-Media PCI Audio Device
Graphics Card: ATI Radeon HD 4200
OS: Microsoft Windows 7 Home Premium 64-bit 7600 Multiprocessor Free

A:BSOD at random, errors 0x0000001e, 0x00000024, 0x0000003b, 0x00000050

Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

Read other 9 answers
RELEVANCY SCORE 78.4

Had a BSOD on Sunday. Took the sides off the computer to find the heatsink caked in dust. Cleared that out with some compressed air and seemed to do the trick just fine. Computer fan running much quieter too then.

All fine on Monday and then cranked the PC up this evening and BSOD again. Couldn't get Windows to start, so tried removing RAM and then removing all hard drives except my boot drive containing Windows. Set up is SSD with Windows on, second SSD with programs on, HDD for files and data and second HDD for backup; that set up has been running fine for some time.

Have managed to get Windows to load and no BSOD currently, with three drives plugged in and the main HDD for data NOT plugged in. Not sure if that drive is the common problem.

Some BSOD messages I have seen, before it vanishes, include PAGE_FAULT_IN_NONPAGED_AREA and REGISTRY_ERROR and SYSTEM_SERVICE_EXCEPTION

Any help and advice much appreciated. The diagnostic data was run without said HDD plugged in.

Brief update.....
PC still running but trying to shut down, I get a Windows Explorer has stopped working error, as below. Could this be linked to the other drive not being plugged in? The unplugged drive contains my 'Desktop' so I wonder if this is confusing Windows somehow. Only way to shut down seems to be to just power off.

Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.1.7601.17567
Application Timestamp: 4d672ee4
Fault Module Na... Read more

A:BSOD multiple errors, error 0x00000050 and error 0x0000003B

Hiya and welcome to SevenForums!

Code:
BugCheck A, {fffff900008d1ee9, 0, 0, fffff80002ad41dc}

Probably caused by : win32k.sys ( win32k!AllocThreadBufferWithTag+24 )

Followup: MachineOwner
Hmm, re-install Windows as your getting 0x51 errors because 0x51 errors are registry related errors.

Read other 9 answers
RELEVANCY SCORE 78

Hello all,

i am in dire need of some help with my pc. I am experiencing numerous BSOD issues. It started out whilst gaming with Battlefield 3 but is now happening all the time weather it be browsing the internet or just doing nothing. (If it helps firefox is crashing all the time). the computer is 10 months old and ran fine up until recently.

I have had page fault, memory management, NTFS fault, bad pool, system exception.

I have reviewed the forums and tried all the usual fixes, which goes along these lines:-

I used memtestx86 on my ram and found i had a dead stick so i purchased new 2 x 2G OZ 1333mhz, tested them for 20hrs and when they tested fine replaced the old sticks. Great i thought sorted, alas no.

I removed AVG as one of the dmp files indicated it was that. nope

carried out a chkdsk / r which showed no errors

I removed all my nvidea drivers as they were being indicated but no its now worse than ever.

I have attached the minidump files i have had over the past two days.

Any and all help is appreciated (also if you need anymore info ill try my best)

Cheers Steve

ASRock M3A770DE AMD 770 (Socket AM3) DDR3 Motherboard
AMD Phenom II X2 Dual Core 555 3.20GHz Black Edition (Socket AM3)
Asus GeForce GTX 460 Direct CU TOP 768MB GDDR5 PCI-Express Graphics Card
OCZ Gold 4GB (2x2GB) DDR3 PC3-10666C9 1333MHz Low-Voltage Dual Channel Kit
Arctic Cooling Freezer 7 Pro Rev 2 CPU Cooler
Windows 7 Pro x64

A:BSOD - whilst gaming / browsing - error codes vary - ntoskrnl.exe

also the power supply is 1250W, cooler master

Read other 4 answers
RELEVANCY SCORE 77.2

Been getting frequent BSOD past few months, like 2/3 times in a month. Only recently have I started getting crashes every other day. It isn't even a BSOD, it just crashes and restarts as if it was a BSOD.

A:BSOD randomly while playing multiple games and idle, error 0x0000003b

You do not have Service Pack 1 installed.
Make sure you install it to prevent vulnerabilities in your system.


Code:
Version 6.1.7600 Build 7600
Install all updates using Windows Update.


Code:
DAEMON Tools Ultra Agent "c:\program files (x86)\daemon tools ultra\dtagent.exe" -autorun Ziyue-PC\Ziyue HKU\S-1-5-21-1359861946-2656565172-626367282-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Daemon Tools/Alcohol is known cause of BSODs, you will have to find an alternative as there is no way around this.

Registry and SPTD problems | DAEMON Pro Help
How to remove sptd.sys from system

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
3. Double click the executable to open it
4. Click the button shown below

If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.


Code:
Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0xa0cb7
Your display driver is also causing issues.


Code:
2: kd> lmvm atikmdag
start end module name
fffff880`13e9a000 fffff880`14b88000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: atikmdag.sys
Image name: atikmdag.sys
Timestamp: Fri Nov 29 16:59:33 2013 (5... Read more

Read other 1 answers
RELEVANCY SCORE 76.8

Hello,

I have just bought new computer and from the beginning i have had many BSOD's. I have installed all Windows Updates and all newest motherboard and graphics card drivers. I did the Memtest with 0 errors so that isnt the problem.

Blue screens come randomly, when im playing or surfing in the internet and just last time i got it while i was trying to shut my pc down.

Help would be appreciated, since i dont know much about computer tech!

A:Multiple BSOD's, different error codes

It appears that this install of windows is counterfeit, the Product ID matches an ASUS OEM_SLP key while the motherboards is a retail Gigabyte board. This is only possible through an exploit which negates the windows activation. Please purchase a legal copy of windows, format and then re-install using the new legal copy.

Read other 1 answers
RELEVANCY SCORE 76.8

I have been having the following problems with my system at different times of use. I play Star Wars the Old Republic and use my PC for email, facebook, and other small tasks.

System Specs:

Windows 7 Home Premium x64 (OEM)
AMD Phenom II X4 820 (2.8 GHz)
Nvidia Geforce GTS 450 (EVGA)
6 GB RAM (3 x 2GB) DDR3 PC3-10600 MB/Sec
500w Thermaltake PS

The System was purchased from Best Buy in December of 2010. The model is HP p6674y.

Here is what I have done so far:

I installed the after market video card and power supply in mid January of this year. It ran fine for three weeks then the blue screens started. I tracked the stop codes and tried to isolate whether or not it was hardware or software related. I found some threads with HP printers being an issue so I removed my new printers drivers. AVG was also showing up so I installed Avast.

None of this worked and my comprehension is limited. I performed a system recovery to avoid any more hassle but it still blue screened. I also removed my video card to see if that was the cause but it still crashed.

Next I thought my system was overheating. I do not know the legitimacy of system temp programs and the acceptable temp range for a CPU to run at. Knowing that, I pulled the side of my tower off and used a small desk fan to cool it. I also used compressed air to clean the heat sinks on my CPU and all other parts of the motherboard. It still went to blue screens with the cooling steps taken.

I followed the instructions and have a... Read more

A:BSOD with multiple error codes.

> I note you have Avast.
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST

http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
> I suggest you run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)

Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

Read other 9 answers
RELEVANCY SCORE 76.8

Hi,

I seem to get 1 BSOD each day I use my computer for more than an hour or two.

MSI GT70 2OD
Intel i7 4700mq
Intel HD4600 and Nvidia GTX780m

I have been told previously that the BSOD's i get have been graphics driver related. I have basically been going through every different driver I can find to hopefully find a combination where they do not conflict and crash.

If someone could please take a quick look and make sure im still on the right track with Graphics card drivers. Would be great to find out I just missed something obvious and will be a quick fix.

I was thinking I should roll back to windows 8 from 8.1 but a quick look around and it seems these GT70's suffer from the blue screens on windows 8 too.

Would be greatly appreciative of any help.
Thanks

A:BSOD's with multiple different error codes

Your BSODs are various and assorted. Something is misconfigured in the machine.

Start with updating the bios to latest, from manufacturer. Then, set Optimized Defaults in the bios and save. (Make sure you set AHCI mode for the hard drive(s) after, if that is how it is currently set - AND - Optimized Defaults set it wrong.)

When back to Windows, use CPU-Z to compare the Memory Tab to SPD tab. The SPD tab will tell you how the memory should be set. See if Memory tab reflects that well.

Let us know how it goes please, and let us know if you need further help.

If you have mismatched memory sticks, remove the slower ones and leave only the faster ones. Check the motherboard manual for which slots to have memory installed properly.

Make sure cooling is working sufficiently and the fans are clean. Use the laptop on a flat surface where the air can easily exit the port(s).

If you're overclocking with any sort of utility in Windows for anything at all, uninstall now for testing purposes.

I personally really don't like this driver file on your 8 machine:


Code:
4: kd> lmvm mBfilt64
start end module name
fffff800`03dba000 fffff800`03dc8000 MBfilt64 (deferred)
Image path: \SystemRoot\system32\drivers\MBfilt64.sys
Image name: MBfilt64.sys
Timestamp: Thu Jul 30 23:40:32 2009 (4A7267B0)
CheckSum: 0000FF02
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

... Read more

Read other 4 answers
RELEVANCY SCORE 76.8

I have been having multiple BSODs every day recently. It started about 6 months ago (only a few BSODs a week), but has been getting worse. As described in the posting instructions here is some system spec info:
- System Manufacturer/Model: Dell/Studio XPS 8000
- Operating System: Windows Home Premium x64
- the original installed OS on the system? Yes.
- an OEM or full retail version? OEM
- What is the age of system (hardware)? ~2 years old
- What is the age of OS installation (have you re-installed the OS?) ~2 years old
- CPU: Core i5 750 @2.67 GHz 2.66 GHz
- RAM: 6 GB
- Graphics Card: GeForce GT220
- AntiVirus: Microsoft Security Essentials

I have also attached the requested information listed on the posting instructions by jcgriff2. Please let me know if you need any additional information. Any help would be much appreciated.
Thanks!

A:Multiple BSOD every day - Various Error Codes

  
Quote: Originally Posted by busler


I have been having multiple BSODs every day recently. It started about 6 months ago (only a few BSODs a week), but has been getting worse. As described in the posting instructions here is some system spec info:
- System Manufacturer/Model: Dell/Studio XPS 8000
- Operating System: Windows Home Premium x64
- the original installed OS on the system? Yes.
- an OEM or full retail version? OEM
- What is the age of system (hardware)? ~2 years old
- What is the age of OS installation (have you re-installed the OS?) ~2 years old
- CPU: Core i5 750 @2.67 GHz 2.66 GHz
- RAM: 6 GB
- Graphics Card: GeForce GT220
- AntiVirus: Microsoft Security Essentials

I have also attached the requested information listed on the posting instructions by jcgriff2. Please let me know if you need any additional information. Any help would be much appreciated.
Thanks!



These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, a... Read more

Read other 3 answers
RELEVANCY SCORE 76.8

So starting a few days ago, my custom build randomly gave me a bsod while playing guild wars 2. Since then, they happen almost every time I boot the computer into normal mode. Now when I boot it up without my wireless usb adapter, everything works fine. Sometimes I can plug it in after everything loads, and it'll read and work fine for a while, but then randomly bsod when I'm in the middle of something. Safe mode with networking seems to be working fine though. I can even boot right into it with the adapter still plugged in. I've been trouble shooting it all day. Diskchk returned no errors. Did an Avast bootscan with no viruses, but when I'd try and do a full system scan it'd BSOD. (even in safe mode.) Ran memtest, and found thousands of errors on one stick, and then ran the other all night and got 9 errors on that one. So new memory has been ordered, and hopefully that will solve most of my problem. I was just wondering if someone could let me know if that's the extent of my issue, or if there's something else I should do.

Thanks in advance! ^^

A:BSOD's Multiple Error Codes.

Most likely the ram there, but one thing did catch my attention. The USB ports, whats plugged into them?

Read other 7 answers
RELEVANCY SCORE 76.8

Ok Well i've been getting BSOD for about 2-3 weeks now since updating some drivers on my laptop and it is really annoying. I have Windows7_Vista_jcgriff2 with all the required files needed for someone to look at. BTW i am new to this forum so go easy on me.

System Specs: Windows 7
- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? No was originally Windows 7 Home Premium
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 6-7 Months

Attachment 208157

A:BSOD multiple error codes

No one is willing to help?

Read other 5 answers
RELEVANCY SCORE 76.8

I'm having some trouble with my PC for a while now.
Whenever i'm playing GTA5 i get the BSOD with different error codes:

-0x00000001 APC_INDEX_MISMATCH
-0x1000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
-0x0000009C MACHINE_CHECK_EXCEPTION
-0x00000101 CLOCK_WATCHDOG_TIMEOUT
-0x00000124 WHEA_UNCORRECTABLE_ERROR
So far i had these 5 error codes....

System specs:
-Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
-Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz
-Gigabyte Radeon HD 7970 3GB (GV-R797OC-3GD)
-Gigabyte GA-Z87-HD3 (Socket 1150)
-Corsair 8GB PC3-12800 Vengeance (2x 4GB, 1600MHz, CL9)
-Corsair Hydro H80i

I've tried alot and in the beginning i had only the 101 error, i thought my CPU was overheating so i applied some new thermal paste on my cooler. After i did this i haven't seen the 101 back but got 4 new ones instead.
All drivers are up to date, except for bios.
Windows Memory check isn't giving any faults
Any Suggestions? Pls help!

A:Multiple BSOD error codes, 7E, 9C, 01, 124

Hello, Robinsk8 and welcome to the Forums. I will try to help you. First please add your PSU and CPU Cooler to your system specs. Hopefully this will help you. You did a good job filling out your system specs, but we would like a little more.

Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

If you are overclocking anything, please set everything back to default levels. If you have any of the Gigabyte Utilities installed, please uninstall all of them. They are well know causes of BSODs.

I looked at your last several dump files and this is what I found


Code:

Use !analyze -v to get detailed debuggi... Read more

Read other 9 answers
RELEVANCY SCORE 76.8

I cleaned an older system for Windows 8 and I've had error codes like
dpc watchdog
memory management [I think I solved this already... I put in new ram]
system service exception (win32k.sys)
VIDEO_TDR_FAILURE (nvlddmkm.sys)

I've attached 2 Minidumps... I can't run the SF_Diagnostic_Tool.exe because it will have another error when I run.

A:BSOD with multiple error codes

Welcome
Since we did not get all the reports, we have hints as to the cause. Your reports hint that
nvlddmkm.sys is the cause. Go to the website and update driver.
Use option 2. Automatically find graphic drivers
Drivers - Download NVIDIA Drivers

Read other 14 answers
RELEVANCY SCORE 76

I have stumbled upon this forum as im at the end of the road, for a while i have suffered random bsod at 1st i thought it was graphics driver as my card is outdated but i don't think it is after a while of this happening i decided to fresh install windows thinking this would cure the problem, However the problem persists even now if i could get some help it would be appreciated i have attached my mini dump files thanks for looking.

A:Random multiple BSOD different error codes

DroidBoy, I will see if I can give you some help. I assume you have only had 1 BSOD since doing the reinstall of Windows as the files you uploaded only had 1 dump file in it, dated today.

This was the information that dump file provided.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002b61c0f, fffff8800a2f6fd0, 0}
Probably caused by : memory_corruption ( nt!MiUnsecureVirtualMemory+15f )
Followup: MachineOwner
Please Run Memtest86+



   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. Yo... Read more

Read other 7 answers
RELEVANCY SCORE 76

Specs:
CPU:AMD 6300
GPU:2X GTX 660ti SLI
RAM: DDR3 16GB (2X8
PSU:RM750
DISK:1TB Western Digital
SSD:125GB Samsung
MOBO:990FXA-UD3 (Gigabyte)

Read other answers
RELEVANCY SCORE 76

Hello,I'm hoping I can find some help here, and apologize in advance if I provide way too much info below...About a week ago I started receiving Blue Screen of Death Stop errors (with a variety of error codes). There doesn?t seem to be any consistency in terms of when the errors occur or what we?re doing to trigger them. The PC never restarts on its own ? it displays the BSOD until we manually shut down and restart.We get one every time we try to use the PC ? sometimes within a few seconds of starting Windows, other times we?re able to work for 20-30 minutes before the crash. We are able to work in Safe Mode indefinitely, so I was able to back up all our data files to an external hard drive.The Stop error messages seem to indicate a driver problem and I?ve tried updating a few things, but didn?t want to go too far down that road without some closer guidance.As far as I know, there were no hardware or software changes that might have triggered the errors (I guess it?s possible the kids may have installed or run something). Details on the error codes, actions I?ve taken so far, and other symptoms are below. I followed the how-to guide on this site for diagnosing blue screens and crashes. The minidump analysis is at the end of this post.Sorry for the length of this, but I wanted to post as much information as possible up front. I?d be happy to run any additional scans or provide additional information if needed, but really don?t have the expertise to now what to try n... Read more

A:BSOD With Multiple Stop Error Codes

Hi .The best (IMO) source of info re STOP errors is at http://www.aumha.org/a/stop.htm0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDA system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues. Check Event Viewer (EventVwr.msc) for additional information.0x00000005: INVALID_PROCESS_ATTACH_ATTEMPTGenerally, use the General Troubleshooting of STOP Messages checklist to troubleshoot this problem. A specific problem is known to exist with Win XP SP2 and Server 2003 in combination with certain antivirus programs, firewalls, and similar software. See http://support.microsoft.com/?kbid=887742&sd=RMVPHave you tried getting any clues from errors posted in Event Viewer? I would be looking for errors in specific programs that are launched/running (AV, etc.) rather than any indication of hardware errors. I would also try to focus on errors indicating a hard drive problem (Disk0, Disk1, etc.).How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ FWIW: Updating drivers when such errors occurs...is, IMO, most useful when the old driver is first removed (because it's probably damaged) and then a new one is installed. I suspect that trying to install a new file on top of a damaged file...often results in negative results.Are there any indications that your CMOS battery... Read more

Read other 16 answers
RELEVANCY SCORE 76

Hello,

NOTE: Sorry if my English fails, I'm dutch and only 13.
NOTE: I'm going on holiday for some days and probably read this again on sunday.

For about 4 months I receive BSOD and it's getting worse and worse. Last week i've got 3 of them a day.

Error codes:
0x0000003b (2 times)
0x0000001a (8 times)
0x00000050 (4 times)
0x0000004e (2 times)
0x0000000a (3 times)
0x00000024 (2 times)

The dump files are in this post as an attachment.

System specs:
-Windows 7 Home Premium 64 bit
-It's the original installed OS.
-It's the OEM.
-The age of the system is now around 1 year and 11 months.
-The age of the OS is also around 1 year and 11 months.

I've got an external harddisc with an age around 5 months.

Thanks for your help.

A:Regular BSOD (multiple error codes)

I forgot to say that i play a lot of Minecraft.
Minecraft uses Java and when running the maximum frames per second is not more than 50.

Read other 7 answers
RELEVANCY SCORE 76

Attached is my dmp file. This has been happening for months. I reformatted/upgraded my PC recently to Windows 10, which leads me to believe that it shouldn't be a driver issue (I assume it's probably a hardware issue) But I was hoping you guys could help me pin point what it might be. I've also run memory tests, returning with 0 errors.DESKTOP-2L94LSR-Thu_03_10_2016_143224_82.zip

This also happens much more often than the amount of times I let my computer create a .dmp file... Thanks in advance for your help.

-Justin

A:BSOD - Multiple error codes/bug checks

The most recent dump shows:

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: eseaclient.exe

From what I can find, eseaclient.exe is malware so it looks like you may be infected.

Please run a full scan with your anti-virus software then download and run Malwarebytes anti-malware free.
Click on Free Download then Download the free version.

2nd most recent shows:

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: Steam.exe

3rd shows:

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: eseaclient.exe

So definitely start with AV and MBAM scans.

Read other 0 answers
RELEVANCY SCORE 75.2

Hello,

I am getting Multiple BSOD (about once a day) that happen at seemingly random times. I am uncertain of how best to troubleshoot this issue and would appreciate any help you may provide.

I have attached the ZIP file per the posting instructions. If I can provide any additional information please let me know.

A:BSOD while playing games. Multiple Error codes

Hello, Kharma. I will try to help you. I read your last 5 or 6 dump files and other information. I notice you are getting a lot of errors from LOL client and Chrome. If you are running an older version or a Beta version, I would suggest you updating Chrome to the latest stable version which is, 42.0.2311.152 I believe. Your dump files were all over the place and one said Memory Corruption. The fact that all the others were different causes and stop codes is indicative of memory problems.


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff8000311f68c, fffff880103b1e50, 0}
Probably caused by : memory_corruption ( nt!MiCaptureProtectionFromProto+1c )
Followup: MachineOwner



Some of the others were


Code:

fffff880`0d318718 fffff880`04265e09*** WARNING: Unable to verify timestamp for mv91xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys
mv91xx+0x39e09

Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80202c75a0, fffff80007a243d8, fffffa80213d7590}
*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys

fffff800`07a24558 fffff880`089cc340Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x18a3... Read more

Read other 9 answers
RELEVANCY SCORE 75.2

Good day,

I hope the text-wall below doesn't scare you too much, but I wrote down all the things I thought could be helpful.

Let me explain the problem further: I get BSODs seemingly random, with all kinds of error codes and .sys files (as far as I could see on the bluescreens). It startet roughly about when I picked up Team Fortress 2 again. Maybe it's something else, but when it began I was so sure that it was TF2 causing it, that I didn't investigate other causes back then. Surprisingly (for me), it went on even when I wasn't playing, causing BSOD whenever it wants (Youtube in Firefox, while booting...).
In addition to the BSOD I can give you the following scenario that happens whenever it bluescreens: The PC automatically tries to reboot after the dump files have been collected (by the way, not all files get collected. I have multiple BSODs without logs, because it got stuck while collection dump files. After 1+ hour I forced it to shut down by holding down the start button). The PC tries to reboot 2 times without success (it doesn't get to the BIOS screen) and with the third attempt it just idles somewhere - I don't get any video signals nor am I able to enter BIOS, because my (USB) keyboard isn't active. I can tell because it's a wireless one and the receiver has a little LED when the keyboard is ready to use. I have tried none the less by constatnly pressing F2 to enter BIOS (which gives a 'beep' when successful), but nothing happened. The screen goes to standby beca... Read more

A:BSOD mainly playing TF2 and Dota 2, multiple error codes

Welcome to the Forum faebu4,

Please remove Norton for testing purpose.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes: Removes malware including viruses, spyware, worms and trojans, plus it protects your computer
Good and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.




RTCore64.sys Mon Mar 11 11:32:06 2013 (513D6C56)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
Driver Reference Table - RTCore64.sys

Uninstall Riva Tuner, it is known to cause BSOD's.

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Code:
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-21... Read more

Read other 3 answers
RELEVANCY SCORE 75.2

Hi guys

About a 2 month ago I built a new PC, installed a fresh copy of win 7 x64 and started getting random BSODs. It only happened once/twice a week but has started happening more requently, 5 times in the past 4 days. I've done several MemTests (both slots, single slot, different RAM in each slot) and no errors have come up. I've tried to the best of my ability to update my drivers but I may have missed something. Also, the bugchecks are not consistent (1e, 7e, 3b, ect) although 1e and 3b are the most frequent.

I'm feeling rather desperate at the moment and am considering buying a new MoBo.

System Info:

CPU: i7 2600k 3.4 Ghz (2 months old)
MoBo: Asus P8H67-MLX (2 months old)
RAM: 2x Silicon Power 4Gb DDR3 1333 (2 months old)
Graphics Card: Zotac GTX275 (18 months old)
Display: Asus G245H + Asus X1993w (about 2years old)
HDDs : 2x 1Tb + 2x 500Gb (a few years?)
PSU: Huntkey x7 900w (18 months old)
Windows 7 x64 Full Retail (installed in September)

Note sure if this is important but I switched from Avast AntiVirus to AVG because I've read that some avast files can cause BSOD.

Would really appreciate any help

Thanks

A:Frequent random BSOD, Multiple error codes

  
Quote: Originally Posted by rka88


Hi guys

About a 2 month ago I built a new PC, installed a fresh copy of win 7 x64 and started getting random BSODs. It only happened once/twice a week but has started happening more requently, 5 times in the past 4 days. I've done several MemTests (both slots, single slot, different RAM in each slot) and no errors have come up. I've tried to the best of my ability to update my drivers but I may have missed something. Also, the bugchecks are not consistent (1e, 7e, 3b, ect) although 1e and 3b are the most frequent.

I'm feeling rather desperate at the moment and am considering buying a new MoBo.

System Info:

CPU: i7 2600k 3.4 Ghz (2 months old)
MoBo: Asus P8H67-MLX (2 months old)
RAM: 2x Silicon Power 4Gb DDR3 1333 (2 months old)
Graphics Card: Zotac GTX275 (18 months old)
Display: Asus G245H + Asus X1993w (about 2years old)
HDDs : 2x 1Tb + 2x 500Gb (a few years?)
PSU: Huntkey x7 900w (18 months old)
Windows 7 x64 Full Retail (installed in September)

Note sure if this is important but I switched from Avast AntiVirus to AVG because I've read that some avast files can cause BSOD.

Would really appreciate any help

Thanks



18 of 24 crashes were caused by a memory exception. AVG can also cause BSOD's especially of this type. How many passes did you run on memtest?
I would do these three things
If you are overclocking anything reset to default before running these tests.
In other words ST... Read more

Read other 5 answers
RELEVANCY SCORE 75.2

Hi,

I'm at my wit's end with this. My PC keeps crashing an hour or two into any game.
I would appreciate some help on this very much.

I'm using Win 7 Ultimate x64.

The error codes vary, but in the last week I've had the following:
1) 0x0000000a
2) 0x00000019
3) 0x00000050
4) 0x0000003b
5) 0x0000001e

Everything was fine until I updated my video card's drivers to Catalyst 11.12. Since then I've uninstalled these drivers, cleaned up with driver sweeper, and reinstalled 11.11, but the crashes continue.

Thanks very much advance.

A:BSOD whilst gaming - multiple error codes

Attached dump files.

Read other 5 answers
RELEVANCY SCORE 75.2

Hi there

New to the forums and really hoping someone could help. I have been having multiple BSOD over the past few weeks at random points, sometimes under load while playing games other times just when the machine is idle or simply logging into windows..

I am running 16GB of Corsair Vengeance ram (2x8GB kits, so 4x4gb sticks in total) I have run memtest overnight with all chips in, just the one set (tested both sets) and also each chip individually with no errors. I have also swapped the chips into different slots and still getting BSOD.

I have checked the BIOS and all memory config and voltages are as per spec. I have also monitored my voltages from PSU and those are within the acceptable ranges. Temps have been good aswell with CPU idel at aroun 30 with a max of 65 (Core i7 2500K) GPU's are running between 30 - 80 degree's (GTX 580's in SLI)

I have also tried updating drivers but still cant shake these nasty BSOD's

Any help appreciated!!

Full Details

- Windows 7 Ultimate x64
- original installed OS on system - Yes first install
- full retail version
- age of system (hardware) - Less than 3 months (complete system)
- What is the age of OS installation - Less than 3 months

A:Random BSOD even when idle Multiple error codes

Updated with the full dump files, pls let me know if you need any additional info, going to run OCCT and driver verify in the mean time

Read other 4 answers
RELEVANCY SCORE 75.2

I have been getting multiple BSOD with several different error codes over the last couple of months. Thank you for you time and attention.

A:Multiple BSOD Error Codes Over A Couple Of Months

http://www.sevenforums.com/crashes-d...tructions.html

Read other 4 answers
RELEVANCY SCORE 75.2

Hi everyone,

Hopefully I've uploaded everything correctly. I've been having fairly regular problems while playing Skyrim, sometimes BSOD (with different error codes), sometimes freezing, and sometimes crashes that return me to the desktop.

The computer has been reasonably stable otherwise.

Any help would be greatly appreciated.

Thanks in advance.

A:BSOD while playing Skyrim, multiple error codes

Hey there,

Uninstall Clone CD/DVD


Code:
1: kd> lmvm elbycdio
start end module name
fffff800`01de6000 fffff800`01df2000 ElbyCDIO (deferred)
Image path: \SystemRoot\System32\Drivers\ElbyCDIO.sys
Image name: ElbyCDIO.sys
Timestamp: Thu Dec 16 17:58:13 2010 (4D0A9985)
CheckSum: 0000C8ED
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Uninstall or update VirtualCloneDrive:


Code:
2: kd> lmvm vclone
start end module name
fffff800`046ad000 fffff800`046bc000 VClone (deferred)
Image path: \SystemRoot\System32\drivers\VClone.sys
Image name: VClone.sys
Timestamp: Sat Jan 15 11:21:04 2011 (4D31C970)
CheckSum: 0000CF5B
ImageSize: 0000F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4



Code:
2: kd> lmvm NTIDrvr
start end module name
fffff800`0374f000 fffff800`03757000 NTIDrvr (deferred)
Image path: \??\C:\Windows\system32\drivers\NTIDrvr.sys
Image name: NTIDrvr.sys
Timestamp: Mon Apr 19 21:37:59 2010 (4BCD0577)
CheckSum: 0000F076
ImageSize: 00008000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Issues surely come from this driver you are using for your game pad. I recommend Logitech Rumblepad II instead. With proper files, it... Read more

Read other 7 answers
RELEVANCY SCORE 75.2

Good Afternoon,

I came across this website during my search to fix my recent BSOD's, and it looks like a great place to get some help. I've been running the same programs with zero problems for months on end. However, within the past week, I've started getting BSOD's at what started as once-a-day and now building up to once-every-15 minutes. It was happening while I would run the PC game Diablo 3, it could happen while just running the menu screen or running graphic intensive play. At first, I'd suffer a BSOD and reboot, with no issues the rest of the evening. Now, it happens repeatedly, to the point where on boot up my PC is locking up and failing to reach Windows (and beeping at times).

The only thing I've done differently lately is install a wireless headset, which I read can cause problems with W7. I uninstalled the drivers, but still had the same issues. I've also gone through some hardware drivers, looking for updates. I've run virus scans and ccleaner, to clean up my registry. I also opened my case, 'dusted' the components, and unhooked/reinserted said components.

Any help will be greatly appreciated. Thank You!

A:BSOD playing Diablo3, multiple error codes

Hi Crobin.

The zip contains only one crash dump which itself is corrupt, is not able to dig data from it.

Code:
.Missing image name, possible paged-out or corrupt data.
...Missing image name, possible paged-out or corrupt data.
.....Missing image name, possible paged-out or corrupt data.
....Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.....Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
...Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Let the computer crash a few more times and then supply the data to us.

Read other 1 answers
RELEVANCY SCORE 75.2

I built a PC a few days ago with some parts i bought new. Everything was new except for the case in which i assume has nothing to do with the blue screen. After building it i installed the motherboard drivers. for about 2 days it ran very quick and smooth, i was able to play most of my games on max. But on the 3rd day it got very slow. To open google chrome it took about 2 minutes. I ran ccleaner and my anti virus which took a while but cleaned everything and no virus. The drivers are all up to date. I have all the windows updates up to date. I have tried to find the problem in many ways. I currently have 5 different blue screens popping up every 2-3hrs and sometimes every time i reboot. I am able to get to the desktop without problem and the amount of times the blue screen has popped out are reducing. I would still like to kill the root cause of this as i do not want to deal with it in the future again.

Blue Screen Codes
- 0x0000003B
- 0x000000BE
- 0x000000F4
- 0x0000001A
- (Fatal Error) C000021A (0x000000000)(0xc0000428)(0x00010560)


My pc parts.
- (OS)Microsoft Windows 7 Home Premium 64-bit
- (CPU) AMD FX-6100 6-core 3.3 Ghz Zambezi 32nm Technology
- (RAM) 3 sticks of Kingston RAM, 1gb, 1gb, 2gb 4.00GB Dual-Channel DDR3 @ 622MHz (9-9-9-24)
- (Motherboard) Gigabyte Technology Co., Ltd. GA-78LMT-USB3 (Socket M2)
- (HDD) 1TB (932GB Real) Seagate ST1000DM003-9YN162 ATA Device (SATA)

Post. Statement. : I also tried a Memtest on every single stick of ram i h... Read more

A:Multiple BSOD Error codes on home built pc

Please follow these steps - Blue Screen of Death (BSOD) Posting Instructions

What happened with this thread? BSOD Error 0x000009c

Read other 5 answers