Over 1 million tech questions and answers.

No audio - Error code 10.

Q: No audio - Error code 10.

I have recently formatted the hard drive and installed Windows XP with sp3. When I install the audio drivers, the sound still doesn't work (no volume control icon appears in the system tray). When I look in device manager, the soundcard does show up there but it has the little yellow exclamation mark next to it and in 'properties' it says 'Error code 10. This device cannot start'.
I have tried different drivers which I got from the Acer support website, but still no joy.
Any ideas?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: No audio - Error code 10.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 52.8

about a week ago the sound on my laptop stopped working. i got the red x along with the no audio device installed message. i did a system restore, tried downloading a new audio driver, tried updating the driver but whenever i do i get a message that says the driver loaded incorrectly code 10 error wont let it start. i've tried the realtek driver and i get that message, the only time it doesnt happen is when i install the conextant audio driver but that only works temporarily, so i know my speakers are not busted. i went to the hp website to ind the correct driver but when i attempted a download i got another error message,"Driver Installation Failed: Could not find the device for this driver." as you can probably tell i know very little about computers. i have an hp pavilion dv2000 and am using vista with a 32 bit. any help/advice would be greatly appreciated.
 

A:no audio device/ code 10 error

Read other 7 answers
RELEVANCY SCORE 52.8

My "Emachines" windows xp is having problems with the sound card. I need help fixing this problem such as either downloading a free one or just help so that my computer can jack up with my speakers.
 

A:Code 28. Audio Device Error

Any help?
 

Read other 2 answers
RELEVANCY SCORE 52.8

about a week ago the sound on my laptop stopped working. i got the red x along with the no audio device installed message. i did a system restore, tried downloading a new audio driver, tried updating the driver but whenever i do i get a message that says the driver loaded incorrectly code 10 error wont let it start. i've tried the realtek driver and i get that message, the only time it doesnt happen is when i install the conextant audio driver but that only works temporarily. as you can probably tell i know very little about computers. i have an hp pavilion dv2000 and am using vista. any help/advice would be greatly appreciated.

A:no audio device/ code 10 error HELP!

Hi and welcome to TSF please go here use the auto detect http://welcome.hp.com/country/uk/en/support.html you can then get the correct driver for your model

Read other 8 answers
RELEVANCY SCORE 52.8

I'm running windows 10 on an HP Omen and after most recent windows update, my computers internal speakers are unavailable, as are any wired connected audio devices. Sound icon says no speakers or headphones are plugged in. Device manager, under sound, video, and game controllers does not show realtek HD audio. This only appears when I go to view and select show hidden devices. Then, under properties, I can see Code 45 (hardware device not connected. To fix, reconnect). I have attempted driver fixes including driver version 6.0.1.8591. Troubleshooters for audio detected nothing. I have tried rolling back the windows update.

I cannot find any sites that recommend steps beyond checking driver for the device. I've also tried calling HP tech support twice, and both times representatives told me they needed more time to find a solution (which they have failed to do).

Anyone who has dealt with this issue or has thoughts, any advice appreciated.
 

Read other answers
RELEVANCY SCORE 52.8

Hi

I have an Acer laptop with Windows XP Media center edition 2005 installed.
I updated my media player to version 11 and now I can get no sound at all.
I have gone into Device Manager and that is where I am gettin the above
error message
I am not a computer expert so any help will have to be ***** proof. After this
I promise not to udate ever again

Many thanks
 

A:No Audio Device code error 28

Lol...dont you just love computers!!

Could you download the following progam and run it.....as it opens the 1st page that opens will be called "system summary"...on there will be the details for your "mainboard/chipset"...could you post those details back please
 

Read other 12 answers
RELEVANCY SCORE 52.8

I have a HP Pavilion a1203w computer with Windows XP Pro. When I try to install SiS 7012 Audio from the SiS website or any other site I get this error message when it is installing -536870397. I can't get the driver to install. I do not have the disk that came with the computer.
Thanks
 

A:Error code for audio driver

micron, try these links and see if you can find more info;
http://www.google.com/search?hl=en&...&q=error+536870397+SiS+7012+Audio&btnG=Search
so can we assume you have tried these drivers also?
http://h20000.www2.hp.com/bizsuppor...kId=135&prodTypeId=12454&prodSeriesId=1118267
 

Read other 2 answers
RELEVANCY SCORE 52.4

For some reason I lost all sound on my PC. Yellow exclamation point at IDT H D audio. No sound device available on device manager. Tried uninstalling, reinstalling, went to Dell's website for up dated drivers, no luck. When I update driver thru "add hardware wizard" it says no better driver available, then I get unable to start device "IDT High Definition audio Code 10 error"
I think I have been just about everywhere looking for help. I see a lot of same trouble when I "Googled" it but no solutions.

Can anyone help??

Thanks,
VC

A:IDT High Definition audio Code 10 error

please tell us the brand name and model of your computer, VCinRI. there are so many IDT HD audio drivers out there that are OEM-specific [meaning specific to certain PCs like HP, Dell, Gateway, Sony, etc.] and will not work for your specific type of computer. don't expect IDT to release "generic" HD audio drivers on the IDT web site because IDT only provides them to computer manufacturers, not to end-users like you and me.

Read other 5 answers
RELEVANCY SCORE 52.4

hey guys, my sound won't work on my computer and i've been told i need to update my drivers but i'm not sure how to do this for free. My c - media Audio device version 5.12.1.51 for windows xp is not responding. Everytime i browse the web for an update i keep getting bogged down with people trying to sell me auto driver updates who at first appear free. The only thing that's free is the initial scan where i'm told that i have 44 out of date drivers and if i pay 29.99 then they will all be replaced with the correct ones. Please help, i'm sure i must be able to update for free i just don't know how!!
 

A:c - media Audio device code 10 error

Go to the web site of the manufacturer of your computer and get the audio driver for your make/model number of your computer.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Hi ALL,

I have an USB external sound card made by ZOOM/U24. The company supplies the driver etc...Everything goes fine until it asks me to plug in cable and turn it on, then I get this message>

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)

Is there a workaround? It is a Brand Name hardware, I got everything enabled, but windows 7 64bit chooses a wrong audio driver....dated 2009 by windows...

This is on a Lenovo laptop X220.

THANKS IN ADVANCE

Read other answers
RELEVANCY SCORE 52.4

Hey guys! This is my first post and I hope I can get some help!
A few days ago, I set up my desktop and installed a fresh copy of Windows XP Pro. Of course, I had to get all my drivers manually, and I did. Everything was all fine and dandy until I realised that I had no sound. so searching I went until I found the driver I needed: Realtek AC'97 Audio. So I restarted and figured I would have sound. That was not the case. So I went into Device Manager and found a black exclaimation mark in a yellow bubble on my sound driver. I right-clicked it and went to "Properties". In the text box it said: "This device cannot start. (Code 10)"! I cannot seem to fix this issue! I went to RealTek and downloaded them. I went to Asus but could not find the drivers for my model (I am not 100% certain but I think I have a Pundit-S)

System Specs:

Mainboard : Asus P4R8L
Chipset : ATI 9100 IGP
Processor : Intel Pentium 4 @ 3200MHz
Physical Memory : 2048MB (2 x 1024 DDR-SDRAM )
Video Card : RADEON 9100 IGP
Hard Disk : Seagate ST380811AS (80GB)
DVD-Rom Drive : ATAPI DVD D DH16D2P
Monitor Type : ProView Technology - 17 inches
Network Card : 3COM 3C920B-EMB-WNM Integrated Fast Ethernet Controller
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
DirectX : Version 10.00
Device Audio : ASUSTeK Computer IXP150 AC'97 Audio Controller

If this isn't enough info, please tell me so I can add to it. If anyone can help it will be DEEPLY ap... Read more

A:Solved: RealTek AC'97 Audio Error Code 10!

Read other 9 answers
RELEVANCY SCORE 52.4

hi this is venkatesh, i am new to this community,i have formatted my system and install xp operating system,but i cant install my audio drivers,one error was occured named code 10 error,pls tel me how can i fix this problem,pls help me,thanks in advance....


my system configuration is


Pentium(R) Dual-core cpu
[email protected]
1.99 GB of RAM
Intel(R) G33/G31 Express Chipset Family
Intel(R) G33/G31/P35/P31 Express Chipset Processor to I/O Controller - 29C0
Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
Giga-Byte Technology Avance AC'97 Audio
Realtek HD Audio Driver version:5.10.0.5567
Chip: Intel Corporation 82852GM Montara Host-Hub Interface Bridge (A1-step)
Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
 

A:Code 10 error when installing audio drivers

You are showing two different audio drivers:

1. Realtek HD Audio Driver version:5.10.0.5567
2.Giga-Byte Technology Avance AC'97 Audio

Delete both in the Device Manager, and restart your computer
 

Read other 1 answers
RELEVANCY SCORE 51.6

hey guys I'm new to this forum. I have a problem with finding appropriate Audio driver after installing windows7. My multimedia audio controller must have not carried over from windows XP or is incompatible.
I already tried downloading a Realtek audio driver and think i followed directions correctly, however there is still no sound and the error message has not gone away. ergo, no sound. I took some screen caps to help you guys see what I've done so far

PLEASE HELP MY COMPUTER FIND ITS VOICE :P

A:Multimedia Audio controller error code 28. where&what kind should I DL

Hello and welcome to the forums, cogitoergonom!

Please fill up the rest of your system specs by following this tutorial so we can help you better:-

System Info - See Your System Specs

Read other 2 answers
RELEVANCY SCORE 51.6

Hello,

i don't have any sound, Windows 7 says that no Audiodevice (in system control) installed and Windows 7 says (in device manager) Device can't be startet. (Code 10).

I'm using a Toshiba Satellite P100 Notebook

I attempted to install Vista or XP 32Bit driver but it flop's the message "Device can't be startet" or bluescreen.

Have anybody the same error and fixed it?

grets & thx

The Gecko

A:Conexant audio hd - Error: Device can't be startet. (Code 10)

I had the same problem and was about to give up, but http://support1.toshiba-tro.de/tedd-...0718114232.zip
had the solution.

Are you able to put your computer to sleep? I can hibernate but not resume from a sleep.

Seems like similar problems between Windows & and Linux which had big issues with audio and hibernate/stand-bye

Read other 9 answers
RELEVANCY SCORE 51.6

I just updated my msn live Messenger and installed Family Safety System, Silverlight and a Photo Gallery. Before that I was able to use audio chat. Now I always get this error after a long wait of calling. "Messenger is not available right now. Please try again later. (0x80ef01f8)"

Also, I wasn't able to add contacts. I searched for solutions on the internet and there was one where it says testing the HTTP proxy server would tell me if anything was wrong, and there was (the HTTP box was blank). It said "We are unable to connect(80072eff)" I don't know how to solve this. Can anyone help me?

Read other answers
RELEVANCY SCORE 51.6

Howdy folks, I recon most of you probably seen this problem before. I browsed around the forums and the internet a bit to see if somebody was successful in solving it. No luck so far.

All people who had this problem I seen online had Realtek Audio Drivers, I have VIA HD Audio Deck. When I go in control panel>device manager I see a faulty Audio Device with Code 10, the device is manufactured by Microsoft, not VIA. I tried uninstalling it but it reinstalls right away and still shows up as faulty with code error 10. I also tried uninstalling all VIA HD Audi drivers but that didn't help either.

Motherboard: Gigabyte Z77MX-D3H
OS: Windows 7 Ultimate 64-bit
GPU :EVGA GeForce GTX 670 2GB
CPU: Intel core i5 3550 3.3GHZ
Sound cards: (1) NVIDIA High Definition Audio (2) High Definition Audio Device (3) High Definition Audio Device

I don't get the last two. Only one of them seems to be working and it's also manufactured by Microsoft.

All drivers are up to date.

Thanks in advance for your help.

A:High Definition Audio Device(Code error 10)

Juub

Try this driver

Name Download VIA Audio Driver

Read other 2 answers
RELEVANCY SCORE 51.6

Hi there,

So when I woke up my computer from sleep this morning, for whatever reason, the sound didn't appear to be working. Nothing seemed to be amiss, but I simply wasn't getting any sound. When I clicked on the speaker icon and tried adjusting the volume, the bar would show up, but there'd be no sound.

So I tried restarting the computer, and the speaker icon now had a red cross next to it, and says "No audio output device is installed" when hovering over it. Clicking it brings up a "detecting problems" window, but it always says that no problems have been found, and/or that hardware changes may not have been detected.

When I go into device manager, there's no tab for "Sound", instead, it shows "other devices" with a question mark symbol next to it, and below it is "multimedia audio controller", which has a yellow warning triangle next to it. Trying to update the drivers does nothing, it apparently can't find any. When I click on the properties for the device, it says "The drivers for this device are not installed. (Code 28)".
I can't seem to find what manufacturer it is or what not, since it lists everything as being "not known".

My computer is a Windows 7 64 bit, doesn't appear to be having any other issues currently aside from the sound not working at all. I've tried plugging in headphones as well (via the USB) to see if I could get sound from that, but nothing.

I haven't made any changes to my co... Read more

Read other answers
RELEVANCY SCORE 51.6

Hi peeps.

First time posting, so if im not doing it right i apologise.

I recently formated my pc, and re-installed windows XP pro.. installed all my drivers ect & everything was working perfect even my sound.. the next day when i switched the pc my audio device has a code 10 error?

How does that work? i dont have a virus as i did scans, i tried uninstalling and re-installing all different audio drivers even older versions, just doesnt seem to work...
Im getting sleepless nights with this nonsense .. damn digital signatures

My pc specs:
AMD 3000+
motherboard 7njl3/4
geforce 6200a
1 gig ram
120 gig hardrive.

PLEASE HELP ME.. it is so damn annoying..

thanks in advance.
 

A:Realtek ac'97 audio drive not working, error code 10

No sound?

Try the simple things first. Speakers on and working? Plug them into a MP3 player, test that they actually amplify. Speaker plug in the correct socket in the PC? ( I mean not the Mic socket?) Have you looked in 'Device Manager' for a yellow warning by the entry for your sound option? Assume you know all the above, it's most likely still to be the wrong drivers. Go into 'Device Manager' and uninstall any sound drivers. Then go to www.drivereasy.com and download their free program, scan your PC and you will get the right driver I would think. You might also find a few other drivers out of date too. And NO it doesn't cost you to use that program. Hope this helps.
 

Read other 35 answers
RELEVANCY SCORE 51.6

Hello,

I don't know what's wrong with this.I have no sound for anything. and even when I try to stream videos in the internet, the video automatically pauses for about every 12 seconds.

I don't know what to do but I think you guys can help me.
I also have a Realtek AC'97 audio for VIA(R) audio controller. I'm running Windows XP Service Pack 3. My motherboard is VIA VT8237R plus.

I'm having the same problem:
Device cannot start( code 10)

I also tried to install that vinyl_v700b
but every time the installation starts, my conputer tends to restart. That's why I can't install that one.
what's wrong? Can you guys please tell me what to do?
thnx. I cant really watch videos nor play music files.

Thanks again.
 

A:Realtek AC'97 audio controller not working -- error (code 10)

Apart from the audio driver, it is critical to have the right chipset driver installed. The VIA southbridge needs to work properly to interface with the vinyl audio processor.
So try installing the chipset driver first, and then the audio driver. And of course make sure all MS updates are installed, including the MS UAA driver.
 

Read other 1 answers
RELEVANCY SCORE 51.2

Hope someone can help me out with my audio problems...

I have an ASUS A54C laptop less than a month old.
-Windows 7, service pack 1.
64 bit.

About a week ago Asus live update automatically installed some updates (I didn't realise I could disable auto update, still getting used to this laptop)
when it restarted a few errors kept popping up and the webcam was not working. After googling I came across forum posts saying you have to manually download the drivers from the website. After doing that the webcam software showed a message "no audio device found" I thought ok, no problem I'll just re-install the audio driver (I had done this a few weeks previously because the built in mic was acting up).

The first half of installation completed, laptop restarted but then gave me the following error when trying to complete the second half:

Install Realtek HD Audio Driver Failure !!
[Error Code: 0x00000002]

Things I've already tried:
-I have tried several times to install the audio driver
-Tried installing different versions
- downloading directly from realtek
-System restore a couple times but it failed.
-Updated the BIOS (although I have no idea what this actually does)

I don't know what else to do.
Please help!
 

A:Solved: Realtek HD audio won't install [Error Code: 0x00000002]

Read other 8 answers
RELEVANCY SCORE 51.2

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 1014 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 57231 MB, Free - 42209 MB;
Motherboard: Gateway , , 86.05 , QTFBCP80500764
Antivirus: Norton AntiVirus, Updated: Yes, On-Demand Scanner: Enabled

I am building a beginner computer for my Dad and can not get the sound to work. There is a yellow shield with ! in it on the Sigmatel High def sound.

Please help!
 

Read other answers
RELEVANCY SCORE 51.2

I bought a laptop from a friend and it has no sound. When I tried to find the source of the problem an error message pops up which I am sure is the root of my problem. It is Realtek AC97 audio driver error code 10. Make: emachines xp, Model number: m622-uk8x. Can someone please assist me with this issue, I would really appreciate it. Thanks in advance.
 

A:Solved: Realtek ac97 audio driver error code 10

Read other 16 answers
RELEVANCY SCORE 51.2

I do not know what happened. It just suddenly stopped working one day and now the sound icon in the toolbar has a red "X" on it. When I click on it it runs a trouble shoot which eventually comes up with "ATI High Definition Audio Device has a driver problem." I have tried to go to Realtek and download the "ATI HDMI Audio Device" and run that but it hasn't worked. I also tried to do the driver only download from the website for Windows 7 but that didn't seem to work either. I eventually received a message that stated "Install Realtek HD Audio Diver Failure !! [Error Code : 0x000000FF]." I looked in Windows Update to see if maybe there was a new update for a driver to fix it but it didn't have anything.
 
I come to you all because it's what I did last time I had an issue and you all were very good to me. You all are a lot more computer savy than I am so you all are able to think of things to solve issues that I never even think about. I really need you alls help. Also, I have heard that this type of information may be important in trying to solve this to by motherboard is a Gigabyte GA-770TA-UD3.
 
Again, please, any help will be much appreciated. I have tried a lot of things but nothing has worked.
 
Thanks in advance

A:Audio suddenly stopped working, "error code 0x000000ff"?

my guess would be sound card went bad. replace that bad boy!

Read other 97 answers
RELEVANCY SCORE 51.2

i had a dell inspiron 1440.. I tried to install windows 7 ultimate x86, when its done, all of the driver working except 1, the audio driver.. in the device manager, the HD audio driver(IDT 92HD81) says error code 10, when I try to install the driver, it wasn't work at all, it say's the driver doesn't match with the hardware, in fact it was from the dell's audio driver from the dell's services & support!!!..
i've try all the dell's forum sugestion but none of it works..
this is the driver's patch name PCI\VEN_8086&DEV_293E&SUBSYS_02CF1028&REV_03\3&18D45AA6&0&D8
I couldn't think anymore,.. my brother sayz, just sell it & buy new one, I guess it's the best choice,.. but can this problem fix for anyone???
please help me..

regards Wijayatno...

A:IDT Dell Inspiron 1440 audio driver error code 10

Did you install the Dell motherboard chipset drivers? They need to be installed BEFORE installing the Dell sound driver or it can give you an error notice that it can't find the sound hardware.

There are three chipset drivers listed on the Dell downloads. Install all three then try the IDT sound driver again.
Product Support for Inspiron 1440 | Dell US

Read other 1 answers
RELEVANCY SCORE 50.8

Hello. I installed a few recommended Windows Updates on 1/15. After the update, install, and computer refresh though, my audio stopped working. I went to Control Panel and tried opening up my audio driver, HT Omega Claro Halo, but the driver wouldn't open. I then checked my Device Manager and found the oh so fun error code 52 associated with my Claro Halo audio driver. You know, the one that says,

"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"

I then rolled back my C drive to a previous restore point I made a few days ago and it was working again which means that something in the update was messing up my audio driver. I re-downloaded the Updates and uninstalled the drivers. I downloaded the latest driver but that didn't work and I am still getting the same error code 52. I know the F8 trick on start-up that disregards the digital signature of drivers but that is only a temporary fix and definitely NOT what I am looking for. I'm looking for a permanent solution. I would appreciate it if someone could help me out here. Thanks.

A:Windows Update causes error code 52 for audio driver in Device Manager

Have you contacted HT Omega about the problem? I used to have an HT Omega "Striker 7.1" sound card and ran into a couple of problems that they straightened out for me (even sent me a special driver to fix a problem).

Read other 2 answers
RELEVANCY SCORE 50.8

I can't seem to play movies on my DivX. I am getting this message "Dolby AC3 Audio (code 8192) install Directshow decoder?" I have been trying to look for a converter but I am clueless of what type of converter i need. Can anyone assist me with this problem ?

Thank You,....
 

Read other answers
RELEVANCY SCORE 50.8

So this all first started happening a few months ago when I was updating my audio drivers. The update was doing its thing then it crashed for some reason, and I haven't been able to update it at all since then. Oddly enough though, my audio has always worked fine. That is until today, for no reason that I can see, my audio has stopped working all of a sudden. But even though I can't hear anything either through my headphones or monitor speakers, I can see the little audio fader thing moving when I have some audio playing.

What can I do to try and fix this problem? Oh, and I should also note, the image that I posted, I get that pop-up everytime I start my computer. And the following is what it shows when you click the Details button.


HTML Code:
Error Code: -5006 : 0x8000ffff
Error Information:
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\ObjectHolder.cpp (442)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)... Read more

A:Error Code: -5006 : 0x8000ffff when installing/updating audio driver.

Hi HS5964,

If the 'Audio' has been working fine lately, you may try performing a 'System Restore' to roll back 'corrupt software changes': System Restore
Note: Please create a 'Restore Point' before attempting the 'Restore': System Restore Point - Create

If the issue persists, you may remove 'Audio drivers' from 'Device Manager' and try installing fresh set of drivers.
- Click 'Start' > Type 'devmgmt.msc' (without quotations) in 'Search box > Tap 'Enter' > Locate and Expand 'Sound, Video & Game Controllers' category > Right click and uninstall the 'Realtek related' driver > Follow through with the uninstall > Allow 'Windows' to restart > 'Windows' will install updates for the 'Realtek Audio' (You may also install drivers from the manufacturer website: Realtek) > Recheck the results.

Hope this helps. Do reply with the findings.

Read other 2 answers
RELEVANCY SCORE 50.8

I can't install my audio driver after upgrading to Windows 7 Ultimate x64! I run a Lenovo Y550, my drivers can be found here. When it starts installing, an error pops up and says:Install Realtek HD Audio Driver Failure !![Error Code : -0001] Any help will be real apreciated.

A:Install Realtek HD Audio Driver Failure !! [Error Code : -0001]

try "run as admin"any error code like 0x000005g4?

Read other 9 answers
RELEVANCY SCORE 48.8

Hi,
Since April I I am facing the problem where my audio service show a red X.  I did all the what the forum states and I just tried to ensure all the dependencies services are started.  However, the audio service does not start but shows the error
1067.I have even installed the driver for my sound card SB Live! 24.
I have run out of option but to ask for your help.  Can you please help me to resolve this issue.  My computer was running smoothly without any problem and suddenly i am facing this issue.
Help, Help!!!!

4Lobos

Read other answers
RELEVANCY SCORE 48

Basicaly the title explain it all,can find the driver for on board audio device.
I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106
Newly instaled Windovs 7 Ultima 64bits.
Trayed few diferent drivers non of them works,so probably is audio device gone.
Any sugestions?

Read other answers
RELEVANCY SCORE 48

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 46.8

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers
RELEVANCY SCORE 46.4

Hello, my name is steven and I would like to begin by saying that I am an amateur when it comes to working with computers. I wanted to free up space to operate my computer faster and hopefully stop lagging while playing games or just browsing for that matter and it seems the only certain amount of RAM to add to increase my speed is the lowest that is sold @ kingston technology which is a 1GB card. Unfortunately, being the amateur I am, I was stumped here , http://www.kingston.com/us/memory/system_specific/server where they ask for my manufacturer, product line, and model. I plugged in all the numbers I could think of that might work for each but nothing matched when it came to the model # and I personally have no clue what my product line is so as I said I was just guessing I have all the information about my computer (from what I believe to be the complete transcript of it) and I just need to be able to answer the questions on kingston technologie's website so I can get my recommended RAM card that will hopefully be compatible with my computer. Nothing about product line is stated and the manufacturer of the cpu is unclear and so I would like help identifying the answers to the three questions posed on kingston technologies website.

IDT High definition audio codec (code 10)
The title explains it all I went into device manager and the only thing with an ! on it was the IDT high definition audio codec and "PCI simple communications controller" beside it under t... Read more

A:Solved: RAM limit and Audio IDT high definition audio codec code 10

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 2.80GHz, x86 Family 15 Model 4 Stepping 7
Processor Count: 2
RAM: 1022 Mb
Graphics Card: NVIDIA GeForce 7300 LE, 512 Mb
Hard Drives: C: Total - 238409 MB, Free - 192384 MB;
Motherboard: Dell Inc., 0FJ030
Antivirus: McAfee VirusScan, Updated: No, On-Demand Scanner: Disabled

These are my computer stats using the techguy's software to identify my information
 

Read other 3 answers
RELEVANCY SCORE 46.4

Hi,

I have several computers of differents (HP, Toshiba, etc) and It happens the same problem. The audio device has an exclamation mark in Device Manager.

I think this problem is caused by some update windows. My OS is Windows 7 Home Premium 32bits .

Does anyone know what Windows Update should be uninstalled ?

Thank You.

Read other answers
RELEVANCY SCORE 46

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

Read other 1 answers
RELEVANCY SCORE 44.8

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers
RELEVANCY SCORE 44.8

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers
RELEVANCY SCORE 44.8

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers
RELEVANCY SCORE 44.8

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers
RELEVANCY SCORE 43.2

Hello everyone now im struggling so bad with this error code on my GPU i have tried several trials and none of them worked such as *uninstall and reinstall *use DDU*Older versions on my driver*latest update on windows and bios*took off battery and discharge the electricity while disabling the driver  none worked and when i conducted hardware test i got this result code : WVC000000-UO7C3G  i need so bad to know how to fix this because unfortunately my warranty expired 1 week ago and i got this issue few days ago ;c  my laptop is a gaming laptop without my GTX it is useless   

Read other answers
RELEVANCY SCORE 43.2

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

Read other 9 answers
RELEVANCY SCORE 43.2

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers
RELEVANCY SCORE 43.2

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).













Solved!

Go to Solution.

A:ERROR CODE AFTER A HARDWARE SCAN, RESULT CODE: WVC007002-UM7YSI

Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers