Over 1 million tech questions and answers.

I need the BIOS Password for Lenovo G50-80

Q: I need the BIOS Password for Lenovo G50-80

Hi My laptop is lenovo 50-80, i need to know my BIOS password to be able to download the software of windows 7 through the USB and i need theBIOS password Can you help?

RELEVANCY SCORE 200
Preferred Solution: I need the BIOS Password for Lenovo G50-80

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: I need the BIOS Password for Lenovo G50-80

Good day and welcome to the community.There is no factory default / master BIOS password.

Furthermore, the only discussion surrounding BIOS passwords generally allowable in the forum is what is published on page 24 of the hardware manual: https://download.lenovo.com/consumer/mobiles_pub/lenovo_g_z_50_series_hmm.pdf

Regards.

Read other 1 answers
RELEVANCY SCORE 61.6

I have had this H50-55 for sometime, several years and suddenly it ask for a bios password when I try to enter the bios to change the boot order.  I have no clue what it is. I hate passwords and NEVER use one unless forced...What can I do?

A:Lenovo H 50-55 Bios password suddenly appears when trying to enter bios. I don't know it.

my guess is that your cmos battery died and it wants you to set day/time.  There is no backdoor password.  The choices are remember the PW or replace the motherboard.

Read other 1 answers
RELEVANCY SCORE 61.6

Hi. I have a Lenovo B50-30 mode 80ES. It was set to require a password on startup starting with a capital "A". While experiencing charging problems, amongst other things, I updated the BIOS to 9CCN35WW, downloaded from the Lenovo support site. Since updating, the laptop no longer asks for a password on startup (No big deal, I applied a windows password), however, when pressing F2 to access the BIOS (which I need to do, the F keys are the wrong way round), it asks for a password, When pressing to strike a capital A, the laptop beeps and doesnt enter it. It wont accept capital letters anymore, therefore it wont accept the pre BIOS update password. I have referred the laptop to Lenovo service, including returning the laptop, and they have been nothing short of useless. They said they couldnt repair it under warranty because of "Marks, cracks, inappropriate treatment" and it would cost £255 for a replacement system board. I really couldnt see why I should pay for an issue created by their support system, so I asked them to return it unrepaired. Upon arrival, the laptop was immaculate, so I dont know what damage they were referring to. Is it possible to downgrade the BIOS to a pre update revision, to change the password and then reset it to one the new BIOS approves of? Thankyou in advance.

Read other answers
RELEVANCY SCORE 61.6

Hello there,I need to change a setting in the BIOS.(intel virtualization technology).I have not put a password in the BIOS since I bought my computer.I am sure.That's why I do not know the code. I tried many passwords I found on the internet.After 3 attempts, I get an error that I need to turn off the computer. It does not give an error code. System-halt says.  Windows 7 64bitBIOS: InsydeH2O Version 03.60.4240CN33WW (V2.19) You can tell me what else to report.Thank you from now.

Read other answers
RELEVANCY SCORE 58

So recently i need to use virtual box to build a practice lab, Intel VT-x is available but not enabled i can only assume because im locked out of the bios setup. Im 99.99% sure i didnt set a password for bios menu. Even if i did, my go to password isnt working, and iv tried for several hours guessing. I tired clearing the Bios by unplugging the ram, battery and cmos battery and holding the power button down for 30 seconds and then plugging in the cmos battery after it power cycles on and off and then one of the ram sticks. That didnt work, because it has a eeprom chip. Remember the password is out of the questions id prefer not to change the mobo or the bios chip if at all possible. My main goal is to enable intel virtualization. But if something else were to go wrong i may need access to my bios setup. Any advice? Thank You.

A:Lenovo Y50-70 Bios Password

Sorry, but there is no solution other than getting the password or swapping the motherboard

Read other 2 answers
RELEVANCY SCORE 57.6

My young bro accidently created a system password in BIOS. I need to change boot mode to UEFI. How can i reset the BIOS/MOTHERBOARD ?

A:RESET BIOS PASSWORD IN LENOVO B40-80.

Hi smileshs ,
 
 
Welcome to the Community Forums. 
 
BIOS password reset can only be done by sending it to the Lenovo depot facility .
Such security is encoded on the BIOS and you may have to get your brother to remember it.
 
 
Regards
 

Read other 1 answers
RELEVANCY SCORE 57.6

Hello! I have a question. Friend of mine gave me this pc (y50-70), everything works fine, can't say anything bad. But the problem is about my bios password and the keyboard. When i try to enter bios it asks me for system password. Asked my friend about it, but he never tried to enter bios. Quetion is, can i change/remove bios password?  About keyboard, every few minutes to 1 hour my A and S buttons stop working for some time (2mins-30mins). And then randomly start to work again. What's the issue? how can i fix this? (When I was writing this text these keys stopped working several times).  Sorry if these questions have been asked before, im pretty new here.   Thanks in advance.

Read other answers
RELEVANCY SCORE 57.6

Hello. I have a problem with my Lenovo Z51-70 loptop. It's about security issue. I want to set an administrator password as a super admin for my loptop and then set a user password without giving permissions to change bios options, But in this series, user can change it and open bios page setup, the only limitation for users is not allowing to change administrator password. But I want to set more limitation for user for not allowing he/she to open bios page setup and change anything there. What can I do? Is there any solution? Thank you in advanced.

Read other answers
RELEVANCY SCORE 57.6

Thanks for reading my post.

I have here a Lenovo G580 Laptop. When powering on it asks for HDD Password. When I try to access the BIOS to remove/edit the password it asks me for a BIOS password.

Now the real strange thing is that no password has ever been set for BIOS or the Hard Drive.... However... I've tried removing the battery and the CMOS battery to reset the password... and when I insert them and power back up it STILL asks for the passwords!?

Any help or guidance would be appreciated. The laptop isn't old however it is just outside of the warranty.

Thanks for reading and I hope someone can help me
 

A:Lenovo BIOS Password - Never Set / Reset

welcome to tsg.....you may want to read the rules page at techguy.org/rules.html, as we cannot assist with bypassing passwords.

closing thread, thanks,

v
 

Read other 2 answers
RELEVANCY SCORE 57.6

I set a Supervisor Password and an User Password for a Lenovo G570 Laptop, running an INSYDEH20 BIOS. Later I decided to exclude the passwords, so I entered in Setup press F2 and I selected Clear Password (something like this). Now when I turn on my laptop the message "Enter Current Password" appears. I put my old password... "invalid password", just press Enter... "invalid password" . I didn't forget the password, I just wanted to remove the password and now I don't know what's happening. How should I do for this matter?












Solved!

Go to Solution.

A:lenovo G570 bios password

The issue was solved. I was using the numpad and when I put the password I used the numbers in "regular keyboard". I didn't know it's difference to digit a 9, for example, using the numpad and the "regular keyboard".

Read other 7 answers
RELEVANCY SCORE 57.6

Hello. I have a problem with my Lenovo Z51-70 loptop. It's about security issue. I want to set an administrator password as a super admin for my loptop and then set a user password without giving permissions to change bios options, But in this series, user can change it and open bios page setup, the only limitation for users is not allowing to change administrator password. But I want to set more limitation for user for not allowing he/she to open bios page setup and change anything there. What can I do? Is there any solution? Thank you in advanced.

Read other answers
RELEVANCY SCORE 57.6

Hi G570/575 UsersThe LCD of my G570 (model 4334) is dead black. I have to use an external monitor which is connected to the D-sub (VGA port)  to view the screen. However, my Window 7 is corrupted and I need to reinstall the OS. But the boot menu does not appear on the external monitor, thus I could not change the boot sequence to make the DVD as the first boot device(the HD is the first boot device now).I was wondering if someone could help me the keystrokes needed to do the following:1. The keystrokes to make the external monitor display the boot menu, save and exit. If this not possible, then2. The keystrokes to change the first boot device to DVD, save and exit.Thanks a lot.Yiping 

Read other answers
RELEVANCY SCORE 57.6

Hi G570/575 UsersThe LCD of my G570 (model 4334) is dead black. I have to use an external monitor which is connected to the D-sub (VGA port)  to view the screen. However, my Window 7 is corrupted and I need to reinstall the OS. But the boot menu does not appear on the external monitor, thus I could not change the boot sequence to make the DVD as the first boot device(the HD is the first boot device now).I was wondering if someone could help me the keystrokes needed to do the following:1. The keystrokes to make the external monitor display the boot menu, save and exit. If this not possible, then2. The keystrokes to change the first boot device to DVD, save and exit.Thanks a lot.Yiping 

A:lenovo G570 bios password

Hi Yiping , 
 
Welcome to the Community Forums. 
 
You can try turning the pc on using the novo button .
Else if the display cannot project , you may have to blind map it , step by step .
It would be using InsydeH20 , initially use Novo button to turn on. 
2nd option to choose BIOS option so down arrow once.
As it now goes to the BIOS main tab by default , 4 tabs to the right so it will be 3 left arrow .
Follow thru with this example.
 
Update us how it goes.
 
Regards
 
*** edited note for additional link ***
 
You can use this BIOS simulator for G570 to accurately map the step.

Read other 1 answers
RELEVANCY SCORE 57.6

CAN SOMEONE HELP ME??
I CAN NOT ACCESS MY HD DATA ALSO BECAUSE I ASK FOR PASSWORD
WHEN I ON THE NOTEBOOK APPEARS A SYSTEM Password Screen
I CAN NOT ACCESS ITS BIOS.
JA FIZ SMALL TEST, REMOVI THE BATTERY HAS NOT ADDITIONAL.
I WILL NOT WAIT, VALTER VFHF

A:HOW TO REMOVE LENOVO G40-70 BIOS PASSWORD?

Welcome to the Lenovo Community !
 
Sorry to hear of your problem.  From what you have described I'm not sure if the hard drive password or a BIOS Power On password was enabled on your system.  Unfortunately with either password, discussions are limited by Forum Rules.  This is due to the ease in which laptops are stolen.  If you didn't activate the passwording on your laptop then I would suggest checking with anyone who may have had access to it.  Only they can assist you in removing that password.  The alternative is to contact Lenovo Support for replacement of hardware that is locked by the password. 

Read other 1 answers
RELEVANCY SCORE 56.8

Hi,I have the problem with the system password BIOS in my Lenovo Ideapad 310-15.I set the password and everything was good, password was giving the acess to the BIOS, but some day when I was trying to logIn to the BIOS settings something happened and now I cannot log in to the BIOS settings.Maybe I forgot the password but everything looked good until now.What can I do ? The notebook was bought at this year and it has actual support but I think this issue is out of the warranty.Any idea how I can reset the password by software, if this is possible, or what will be the best solution in my sytuation?Maybe is there any way to reinstall BIOS what give the default access? 

Read other answers
RELEVANCY SCORE 56.8

I have a password in a bios in my Lenovo YOGA 920-13IKB Glass. After last BIOS update (from 5NCN29WW to 5NCN38WW) I can't enter the bios because I can't enter UPPERCASE chars neither with shift nor with capslock, it is literally do not enter anything when shift key is pressed. Now I have completely locked up bios, because my previous password doesn't work anymore.

Read other answers
RELEVANCY SCORE 56.8

I recently changed my BIOS password (aka supervisor password) on my ThinkPad T400 and I did not write it down. I do remember that the character limit for this password was short (maybe 6,7,or 8 characters long). If I knew the (default?) character limit or length I could rule out dozens of other passwords in my memory and gain access to my computer that much sooner. Ive read every manual and users guide for my laptop and there is no other method readily available, no bypass solution so it is imperative that I remember what I set.. Thanks for your time.
 

A:Supervisor(BIOS) password for Lenovo T400...

rillo31957 said:


so it is imperative that I remember what I setClick to expand...

Indeed it is. That's the only solution so there's nothing that we can do as we don't assist with password issues as per the site rules.

As a result I'm closing this thread.
 

Read other 1 answers
RELEVANCY SCORE 56.8

Hello! My wifi stoped working and I updated all drivers and it didn't work. Then for the last thing I've updated the bios from 9acn28ww to 9acn32ww from the site. It went OK, but now that I try to acess the setup I'm prompted by a system password I didn't set earlier, it was empty. It came with Windows 8 installed, but I was using Windows 7 with MBR partition and now I can't configure to Legacy and nothing... Is there any default password like "password" ? Thanks in advance!

Read other answers
RELEVANCY SCORE 56.4

I set the BIOS password. But I forgot the password after a while. I searched the Internet a little and tried a couple of methods. It's like removing a bios battery. I removed the bios battery and the password was not reset. But the computer clock was wrong. So the bios battery only reseting the clock. I corrected the clock, but I still can not reset the bios password. Are the bios passwords held in EEPROM? If so, where is the EEPROM chip?Thank you for your help. ////// BIOS'a ?ifre koydum. Ancak ?ifreyi bir süre sonra unuttum. ?nternetten biraz ara?t?rd?m ve bir kaç yöntem denedim. Bios pilini ç?kartmak gibi. Bios pilini ç?kartt?m ?ifre s?f?rlanmad?. Ancak bilgisayar?n saati yanl?? oldu. Yani bios pili sadece saati s?f?rlamaya yarad?. Saati düzelttim ancak bios ?ifresini hala s?f?rlayamad?m. Acaba bios ?ifresi EEPROM'da m? tutuluyor? E?er öyleyse EEPROM çipi nerededir?Yard?m?n?z için te?ekkürler.

Read other answers
RELEVANCY SCORE 56.4

Hello forum, i.m forgetting the password from the bios and i want to acces to the bios. I have guarantee 1 year. What can i do now? I can boot on windows.Help me,thanks.

Read other answers
RELEVANCY SCORE 54.8

i have set my bios administrator password from long time and iforget it and now i tried to update my bios and there is no change i need some help     my device is : dell inspiron 5520 and the problem with administrator bios password

A:i have set my bios administrator password from long time and iforget it and now i tried to update my bios and there is no change i need some help my device is : dell inspiron 5520 and the problem with administrator bios password

You need to place a voice call to Dell support --- they'll provide you an unlock key upon validation of ownership.

Read other 1 answers
RELEVANCY SCORE 54

Hi...i have a lenovo B590...this laptop was a gift ...two days ago i power up and no boot...shows boot option menu but no option get charge the system, also cannot boot from the usb key or cd room...i tried remove the battery (the two) but still no boot and the bios supervisor password still appear... anybody know a solution?

Read other answers
RELEVANCY SCORE 47.6

I have forgot my BIOS pasword tried 3 times..the code 60778623 apears...what to do?

A:bios password for hp pavilion G4 1303AU bios password

Please try this Password = 75650205RegardsKNRKI work on behalf of HP

Read other 2 answers
RELEVANCY SCORE 45.6

Hey folks,
 
Got an M93 with Win 10. Lenovo solution center asks to do upgrades on BIOS and a bunch of drivers. Did that, and now I can't boot the computer. 
 
Tried pressing F1 after pressing start button, no help. Can't enter BIOS, still stuck at lenovo screen. Also tried Ctrl+Alt+Del on that screen, blacks out then stuck at lenovo screen again. 
 
Please help and inform, thanks!!!
 
James
 
Mod:  edit Subject line with system type













Solved!

Go to Solution.

A:ThinkCentre: Stuck at Lenovo splash screen after lenovo solution bios upgrade

I would try resetting the BIOS using the jumper, or by taking out the CMOS battery, wait a minute or two, and then replace it and try booting up. See page 73 of the Hardware Maintenance Manaul linked below for location of the Clear CMOS/Recovery jumper (# 20) https://download.lenovo.com/pccbbs/thinkcentre_pdf/m83m93p_hmm.pdf Clearing the CMOS (BIOS)1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. 3. Locate the Clear CMOS /Recovery jumper on the system board. 4. Move the jumper from the standard position (pin 1 and pin 2) to the maintenance position (pin 2 and pin 3). 5. Reinstall the computer cover and connect the power cord. 6. Turn on the computer and leave it on for approximately 10 seconds. Then, turn off the computer by holding the power switch for approximately five seconds. 7. Repeat step 1 through step 2. 8. Move the Clear CMOS /Recovery jumper back to the standard position (pin 1 and pin 2). 9. Reinstall the computer cover and connect the power cord. Good Luck, 

Read other 6 answers
RELEVANCY SCORE 45.6

Hey folks, Got an M93 with Win 10. Lenovo solution center asks to do upgrades on BIOS and a bunch of drivers. Did that, and now I can't boot the computer.  Tried pressing F1 after pressing start button, no help. Can't enter BIOS, still stuck at lenovo screen. Also tried Ctrl+Alt+Del on that screen, blacks out then stuck at lenovo screen again.  Please help and inform, thanks!!! James

Read other answers
RELEVANCY SCORE 45.2

Dear All,

I'm unable to access BIOS on - Lenovo IDEPAD 100-80MJ? I tried from Windows 10 by going on:
Settings-Windows and Security-Recovery-Advanced Startup-Restart, but after restart I'm not getting that option saying UEFI? Regards
 

Read other answers
RELEVANCY SCORE 45.2

To make a long story short, I've been asked to help fix a friends mom's U410 laptop which wasnt activiting Windows 8.1 properly (Was Windows 8 OOB). After struggling with the activation for a few hours, I backed up the data and decided to just run the Lenovo one key recovery. During the recovery process, the installation had failed. When I attemped to reboot, no Lenovo splash screen was loading - just a black screen (although i can hear the cooling fan start, and hear the harddrive spin up. I tried to access the boot menu thru the novo button, and nothing would load; still a black screen. After researching for a few more hours, I had found multiple threads about bios updates required to be able to access bios with windows 8, and other threads about gpus on these units booting to a second screen (which i did test, and the second monitor does indicate a signal). None of the solutions on those threads have given positive results.   Basically, I've run out of options and am looking for some suggestions. The only thing that shows up on the display at anytime is the small blue novo menu when the button is pressed (normal start up, bios setup, boot menu, system recovery - all of which just leave a black screen). Thanks.

Read other answers
RELEVANCY SCORE 45.2

Hi Over the last few weeks i have been attempting unsuccessfully to fix my laptop, i have tried every fix i have come across and nothing seems to help. My problem is that my laptop constantly returns to the lenovo splash screen.  I have replaced the hardrive to an ssd as i presumed this may be the problem it detects the hardrive so i believe it is working as intended.  When i try to do anything fresh install of windows, change bios settings etc the laptop closes these windows and returns to the lenovo screen. One issue i can maybe see is that in BIOS information it detects two hardrives the samsung ssd i have installed and a liteonit lss-16l6g . What is the liteonit hardrive? i cant seem to remove it. Has anyone had the issue where it constantly returns to the lenovo screen even when trying to install windows.  Thanks

A:Lenovo u530 bios help, constantly returns to lenovo screen

I have just found the lss ssd and removed it, not sure what its purpose was.

Read other 1 answers
RELEVANCY SCORE 45.2

Trying to reset the password on and old C400, it is asking for primary or administrator password. I have no idea what to put in there, and can't see if  the computer will function at all!  Any help would be greatly appreciated!  Thanks! 

A:Need the reset for password on Latitude C400, bios revision A06, original password.?

You'll need to call Dell with verification of ownership -- it may not be worth it though, since the call will cost about $60, which is probably about six times more than the entire system is worth.
The other option is to replace the mainboard - which is probably well under $60.

Read other 1 answers
RELEVANCY SCORE 45.2

I never kept a bios password but my hp notebook 15-g ask power on password while starting. after three attempts it shows system disabled 63368486

A:System Disable 63368486 bios power on password password erro...

Hi,          Use the below code for reset 72040408

Read other 2 answers
RELEVANCY SCORE 45.2

Hello my friends ! A time ago i bouhgt two Lenovo ideapad 100 14 IBY (FreeDos Version) and install Windows 10 on it with UEFI and GPT Partition Table. All works fine until i want to play around with Linux and install UBUNTU Mate in UEFI on one of them. The install was easy but the Performance on Ubuntu with Bay Trail and the don't working Bluetooth was a reason to switch back to Windows 10. After that the Problem beginns. The Bios don't let me save changes anymore (only time and date !). There was no UEFI ESP and GPT Support since i install UBUNTU and the Bios Menu looks like that:Bios Entries on a blank DiskBootingThe Disk is Blank there is no ubuntu on there (Don't know waht the EFI Entries are no Hardware is connected). And when I boot also go to Network Boot there.(No Matter a USB Stick is connected). So what i did: # I Dismantle it and disconnect Battery and Cell and wait half an hour. # Nothing changes !# I change the HDD. # Nothing changes !# Reflash the BIOS by edit the plattform.ini - CheckByBios=1 - Error Cannot mount EFI Partition. # Nothing changes !# Install Windows 10 - Make mbr2gpt.exe and bcdedit and bootrec. # Nothing changes ! I can install and run Windows 10 in MBR and BIOS Mode on it. But no USB Stick was displayed in Boot Menu. So now Iam on my Limit and the Question is there a way to put UEFI and GPT back on it or does the BIOS locked in this State. For me UEFI is MALEWARE so why can a simple UBUNTU damaged my BIOS and ... Read more

Read other answers
RELEVANCY SCORE 44.8

A few days ago I had some problems with my HDD so I brought a new one.  To install Windows in the new drive I plugged in the DVD drive that Lenovo ships with the laptop and tried to boot from it. That failed and BIOS got like "programmed" or stuck with configurations that doesn't let it recognise any boot media no matter if it is a USB stick or HDD, no matter if I try to change the configuration of the BIOS it would always get back to the initial state of not being able to boot I even tried to reset it by unplugging its battery and the laptop battery but the only thing that happens is system time starting from 0 while any other configuration stays the same.  I thought this could be fixed using crisis recovery mode, but the laptop doesn't recognise the BIOS loaded on the USB and never make any sort of beep or alert noises, the screen doesn't show anything either and fans just get to 100% I really need help to solve this problem, it's like the BIOS got stuck in the last configurations before plugging the DVD drive in. (The Boot menu still showing that there's a USB booteable device even when it is not plugged in).

Read other answers
RELEVANCY SCORE 44.8

   My laptop use Phoenix 89CN25WW and now I want to have a BIOS file of Lenovo Ideapad S410p (touch) or Lenovo Ideapad S510p (touch) to repair the error because BIOS of my laptop was corrupted BIOS firmware    Please help me !    Thank you so much for your support !  Click here for image   Mod's Edit: Image(s) converted to link(s) due to size.  Photos are limited to 100k size per forum guidelines.                     Please refer to About Posting Pictures for more information.

A:[Lenovo Ideapad S410p] Help me ! Please ! BIOS of my laptop was corrupted BIOS firmware

Unfortunately the Lenovo Download library does not have BIOS updates available for either of the models you have listed.  What you might do is a search on the Internet to see if a website like BIOS Mods has something available.

Read other 5 answers
RELEVANCY SCORE 44.8

Hello everyone! I ama new user and i am coming up with this post as I couldn`t find any kind of solution for my problem.Recently I decided to do a reinstallation of my operating system, which also previously was Windows 7 Ultimate (x64). The installation went as usual, and after finishing it I went on to install all the latest drivers from the Lenovo site, for my product. When getting close to installing almost all the drivers i`ve needed, i stumbled upon a new version of the BIOS amnd the drivers and sfotware recommended for my laptop, by the producer. So i proceeded to install the upgrade, restarted the computer when it prompted me to do so, but after the so-called restart the laptop did not boot up as usual. At first it was telling me to not do anything as the BIOS is being flashed and then it was telling me something about some sort of image processing, things that i did not understand at the time (i have never encountered anything like that). After that my screen turned black. I have not done anything for a few couple of minutes as i thought it was supposed to be like that, but then i just force shut it down and unplugged the AC adapter. When trying to boot it all up again, the only thing i got was a black screen and nothing else.After doing a little bit of research it appears that, somehowm i`ve managed to corrupt the bios on my laptop or something, and nothing else would work at this point. I tried to remove the BIOS battery and the ram and then put them all back, trye... Read more

Read other answers
RELEVANCY SCORE 44.8

HI, Please skip to paragraph six for the actual issue I am having--the preceding paragraphs include info that may help to identify how to fix this. I am posting this using my HP desktop running Windows 7 as my Lenovo Ideapad 110 cannot connect to internet as explained below: Firstly, Sorry if I am breaking community guidelines in any way with this post. I did multiple searches but only came up with "forgot my BIOS password-how can I reset it" type posts. I am looking for urgent help to get back into the "BIOS" of my Lenovo IdeaPad 110 running preinstalled Windows 10. Everything was running fine until yesterday. This is when I made the mistake of thinking I knew more about the system than I actually seem to lol :/ So, yesterday--I entered the "BIOS" screen upon startup using F2 (function key+F2). I went on to disable wireless connection ability (to test something unrelated), and also switched Boot from strait UEFI boot mode to legacy/UEFI boot-with UEFI being the default boot option.  I don't know if any of the above have to do with the issue I am now having but I wanted to share it just in case. Here is the real issue as of now: Also yesterday at the same time while in "BIOS", I also went on to set an "admin password", the one you must type in before you can even get to the lenovo splash screen to enter "BIOS". Basically I believe this is referred to as a POST password although I am not an expert cleary (hence asking for the experts' he... Read more

A:Lenovo Ideapad 110-Set an Admin PW in BIOS, Now I can't access BIOS after entering the correct PW?

Sorry for the double post but I just saw this information and thought it might apply to me, please let me know what you think: https://support.lenovo.com/us/en/solutions/ht500216  

Read other 2 answers
RELEVANCY SCORE 44.8

As per subject, after installing Ubuntu 17.10, the BIOS has been changed with two results:1) it's not possible to save new BIOS settings - after re-booting, the old settings are restored2) not possible to boot from the USB - not recognized anymore so for many users without a cd-rom (as per Lenovo Y50-70) we cannot change OS I've reported this major bug on Ubuntu bug tracker here: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1734147 please reply if you are affected too.If you cannot see the post, login in and then search the post named: "Ubuntu 17.10 corrupting BIOS - many LENOVO laptops models" So far the following models have been affected:Lenovo Y50-70Lenovo G40-30Lenovo U31-70 Thank you,Bye

Read other answers
RELEVANCY SCORE 44.8

Hello all,

I hope I can get some help / guidance from some one with more experience with the M400 if possible?!

I reinstalled the OS and setup the biometric security for me, which has worked flawlessly! However I stupidly also set up the boot up security (BIOS Password). So when the tablet gets turned on I can scan my finger and get in without any issues, however I now want to turn the boot up security off. So I booted it in to the OS and went to disable it....however it asks for my password....which I have forgot as I have been a typical end user and have been only using my bloody finger!

Does anyone know if I can disable the BIOS security while in the OS using the biomentric security rather than entering a password? I have tried just changing the admin password within the win OS but that doesn't work....any ideas?

Any help with be greatly appreciated!

Cheers

A:Portege M400 - Change BIOS Password within OS without knowing password?

> So I booted it in to the OS and went to disable it....however it asks for my password....which I have forgot as I have been a typical end user and have been only using my bloody finger!

You are speaking about BIOS password which you set up in the BIOS?
As far as I know you cannot remove the BIOS password if you don?t know the old BIOS password.
In such case just the Toshiba ASP could help you? just the Toshiba ASP technician could remove the unknown BIOS password

Read other 5 answers
RELEVANCY SCORE 44.8

I'm having a problem with a Toshiba Satellite L300D. After I reinstalled the HDD it would beep. To solve this I went into BIOS to look and see if the board had some sort of intrusion setting. When I exited the BIOS and restarted I know get the Enter Current Password (with a blue background on a black screen) with continuos beeps. The thing is it seems to auto enter in 10 characters (*) and then stop. There are no other options.

I have searched unsuccessfully for any info about this and I cant even find where the CMOS is located which I think is soldered onto the board.

Has anybody had any similar experience like this?
I would really appreciate any help its driving me crazy.
 

A:Bios Password 'Enter Current Password' on Toshiba Satellite

Your thread is closed. We do not help with password problems. This is clearly stated in the rules section.
Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.Click to expand...

Please read and follow the rules when posting.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Right before this problem happened, I had suddenly experienced a weird screen glitch and knew to restart my computer. Now, it asks for a BIOS admin or power on password which I did not set. What the heck is going on, and what could I do to fix this??  --WHAT-I-HAVE-TRIED--I have tried "12345"I have tried a blank fieldI have tried "biosPower"-------------------------- --COMPUTER-INFO--Product: HP Stream Notebook 11 (no touchscreen)Product version: 8.1 (x64 architecture)---------------------- If I need to put any more info, just ask.











Solved!
View Solution.

A:BIOS "Admin Password or Power On Password" needed for startu...

@GlitchMasta47? At the password screen, hit enter 3 times and you should receive a halt code - enter this on the site below. https://bios-pw.org/ Regards, DP-K

Read other 9 answers
RELEVANCY SCORE 44.8

How remove password BIOS(Admin password & canfigure setup),
 

A:Admin password & canfigure setup password in BIOS remouver

Turn off computer. Find the battery on the motherboard. Take it out for a couple minutes. Put it back in and restart computer. This should reset cmos and solve your problem.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hi- I have been slowly struggling with a password issue with my Ideapad U530 over the last few months.  The problem is, when I try to acces the BIOS via the Novo button, I am asked for a "system password". However, I did NOT set this password, so I cannot access the BIOS. In terms of other passwords, such as Windows User/Admin, and boot, there is no problem. The only unique thing that I have done with this machine which I could think of the <might> be related to the BIOS password issue, is that I used the Novo button to access the built-in restore tool (I forget what Lenovo calls it exaclty, but it is a system restore application), and I told the machine to re-image itself back to the built-in, out-of-box image. This process worked fine, though, and logic would tell me that this c/would <not> affect the BIOS. Has anyone else run into this issue? Does anyone have any suggestions? Thanks for reading and/or replying. -Chris p.s. - USB booting appears to be disabled. Actually, that was why I first tried to access the BIOS ...to enable USB booting. So, my ability to troubleshoot may be heavily limited by my inability to boot to the internal hybrid HD. p.p.s - the machine is under warranty until September of this year. I've spoken twice with Lenovo support, who were unable to help me. They mentioned the possibility of removing the SMOC battery, though I believe that this will not work since it is the year 2015. They also refe... Read more

A:unknown "system password" (aka BIOS password) on Ideapad U530

Welcome to the Lenovo Community !
 
Sorry to hear of your problems.  With a laptop, removing the battery will not clear a BIOS related password.  That only works with desktop models.  Unfortunately forum rules prohibit further discussion on how to circumvent the BIOS password.  This is due to the ease in which laptops can be stolen.  I would suggest contacting Best Buy again and see if they can further assist you especially if the laptop you purchase had been a floor display.  Otherwise the only remedy to the password problem would be to replace the motherboard.

Read other 7 answers
RELEVANCY SCORE 44.8

I have a HP 17-f020us 17.3-Inch Touchscreen Laptop with window 8. I dont what to have to remove the battery to do this. Way to much for me to try to do. I would like to know how to do it through the Bios.
Thank you,
Rhonda
 

A:How do i remove/disable my Bios Password "i know my user password

Read other 7 answers