Over 1 million tech questions and answers.

how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Q: how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gif

RELEVANCY SCORE 200
Preferred Solution: how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Ndhingra said:



Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gifClick to expand...


The easiest way is to run the CD that should have come with the Router, if you havent got it then you will have to configure it manually.

Full instructions can be found on the netgear website here.

Regards

Read other 1 answers
RELEVANCY SCORE 118.4

HI,
I had to change the properties both in network connections and the router settings under http://192.168.1.1 to WEP

I dont know what it triggered but the modem connected and I was logged onto the net

The mysteries of technology continue to surprise !

S
Iwent ahead and replaced my linksys router with the DSL G604T .Set it up and found it detecting the inbuilt wireless in my notebook and viceversa BUT cannot connect to the internet at all. I read your FAQs and tried the option on http://203.126.164.140/FAQ/view.asp?prod_id=928&question=dsl+g604t but no luck.

When i go into http://192.168.1.1 configuartion, I get a setup wizard which doesnt appear in the user manual at all. I kind of checked all the other options and dont know what additional ones i need to check . Do i need to put in the primary and secondary dns specifically ? The guide doesnt say. The one thing i found odd was the WAN refuses to çonnect (see below) on the default option of pvc0 or on any of the others. Do I need to download another firmware upgrade ?

Firmware Version : V1.00B02T02.SG.20041110

LAN
MAC Address 00:11:95:948:79
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
NAT Enabled

WAN
Virtual Circuit Pvc0
Status Disconnected
Connection Type pppoe
IP Address N/A
Subnet Mask N/A
Default Gateway N/A
DNS Server N/A

Also, do I need to activate the foll. option ? THe manual doesnt say :

UPnP

To enable UPnP, check Enable UPnP and then select a connection.... Read more

Read other answers
RELEVANCY SCORE 118

I have a user who installed a NetGear USB wireless adapter in a WinME desktop system to connect to a DLINK Wireless router.

The adapter is showing signal strength of 68% so I'm assuming it sees the router.

However, there is no connectivity to the net or to the other computers in the network. There is a WinXP desktop system cable connected to the router as well as 2 laptops which are both wireless connected.

I have ensured that WEP is disabled on the ME desktop as well as the firewall software. The adapter config gives two options for network connections, default and first available. I have tried both with no luck.

I've been told to make sure SSID Broadcast is enabled in the router.

Any other ideas?
 

A:NetGear Wireless USB to DLINK router

Read other 15 answers
RELEVANCY SCORE 115.6

I am trying to use Bit Torrent and don't ever seem to be able to connect and have read somewhere that the firewall on the router could be blocking the inbound traffic. I have no idea what I need to change on the settings so was wondering if anyone could help. It's a Netgear Wireless ADSL Router Model No. DG834G v2
Please help as it's getting frustrating as there is so much good stuff I need.

Many Thanks,

Tim
 

A:NetGear Wireless Adsl Router

Please visit the TSG Rules, and note that we provide no support for P2P applications or their problems. This thread is closed.
 

Read other 1 answers
RELEVANCY SCORE 113.6

Hi. Need a lot of help here please......
Let me quickly describe the situation.

I have an ADSL broadband router.
I have recently purchased a NETGEAR WGT 624 wirless router so that I can connect laptops to our network.

Following advice posted on this site previously, I have use lan cable to connect the ADSL router to the netgear. I somehow managed to turn off the DHCP server and have set a static address. I have no idea how i did this or what the static address is, as I fiddled a lot and somehow got it to work.

As I sit here my laptop is able to connect to the wireless network and pick up the network called NETGEAR. It is only a local connection however and does not pickup the internet.
If I plug in a lan cable from the NETGEAR to the laptop, I then have internet connectivety.

The main problem is I have no idea how to configure the netgear router. The manual says:

To log into your router after you have configured your router, do the following:
1. Type http://www.routerlogin.net in the address field of Internet Explorer or Netscape®
Navigator.
When prompted, enter admin for the router user name and password for the router password,
both in lower case letters (or enter the password you chose if you changed it during the setup
in “Initial Configuration” on page 3-2).
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.

When I follow these instructions, my browser (firefox and internet exp... Read more

A:Configure Netgear WGT624 wireless router

Read other 10 answers
RELEVANCY SCORE 112.4

I have ADSL Internet
An ADSL Router

i also have a Freecom DataTank Gateway WLAN

I want to connect the datatank to the adsl router and use it as a switch but cannot seem to do it.

I set the datatank ip to 100.150.0.1 and told it to run as a switch
I set my router as a DHCP server with the ip 192.168.1.1

I Plugged the datatank into the router and can access the internet but cannot access the datatank user interface at 100.150.0.1

Anyone help please!
 

A:ADSL Internet, ADSL Router. DataTank (Cable Router) Daisy chain off ADSL?

problem solved.
 

Read other 1 answers
RELEVANCY SCORE 109.6

I have a DLink 502T ADSL router, and a DLink 824VUP+ wireless router.
I realise my problem is having 2 DHCP servers.
I want my WR (Wireless Router) to be my DHCP server as it has more security features and functionality.

Say I get the internet going on the AR (ADSL Router) and then assign it a static IP (DHCP off) of 192.168.1.1
Then I setup my WR with LAN address 192.168.0.1 and range 192.168.0.100 - ...
I can ping both routers, can only log in to the WR, and cannot get internet.

I have been going for hours trying everything any advice would be excellent. Thanks.
 

A:1 ADSL router, 1 DSL wireless Router 1 internet

Read other 11 answers
RELEVANCY SCORE 104.4

I want to configure my dlink-dir600 router with bsnl wimax but I am unable to do that...
kindly reply with full step by step procedure
 

Read other answers
RELEVANCY SCORE 104

We have a DSL-G604T ADSL Modem Router in our store which keeps loosing port forward settings for a particular machine.
On our network all machines except one are setup to obtain the IP Address by DCHP. In the router we have a few ports setup to forward to the machine with the manually set IP address. We have added user forwarding rules and applied them to the IP, and everything works fine. However after a day or so the rules that we have applied go back to the “available rules” section and we have to then apply them again. However another device (IP Camera) that we have on the network with port forward settings (DHCP is set to give the same IP Address each time for this) has never lost its applied rules, so I’m pretty sure we aren’t missing anything during setup.

This is not a one off problem, in our other store in Lismore they are having the same problem with a customers modem (same model) that they have setup.

Is there anything we are able to do to make sure these rules will stay applied to the IP address they are set to?

We have updated firmware & done a hard reset.
 

Read other answers
RELEVANCY SCORE 103.2

I am trying to connect my DSL modem to a DLINK router with no success. I am able to get into the DSL modem but not the router. I have tried 2 different routers and get the same results. My computer shows it is connected but it is not.

The DSL modem is an ActionTech M1000 and supposedly is a modem/router. It works fine directly connected to the computer.

The routers are DIR-615 and a DI-604. I have used the DI-604 in the past with no problems.

For both of them, I connected from the modem to port 1 on the router. Then from the router's WAN to the computer.

I turned off DHCP in the modem and got the same results. It is PPPOE and according to them it is dynamic, not static.

I powered everything off and on and still no connection.

Any help would be appreciated.
 

A:How to configure a DSL modem and Dlink router

Read other 7 answers
RELEVANCY SCORE 102.8

Last week my computer gave me the "limited or no connectivity" message (not just me, but also my roommate who also has a PC). I unplugged the modem and router, and started them up again. My wireless didn't work. My network is available, but when I try to connect, it says "acquiring network address" for a good minute and then stops. Roommates wireless works.

Toshiba Satellite M105
ISP: Cox Communications
Modem: Motorola SB5101 "SURFboard Cable modem"
Router: D-Link DIR-615 (H/W Ver.:B2)

Ethernet connection works, but I'm trying to connect wirelessly.
Encryption: I think it's WPA2-PSK (from the network connection properties)
Windows XP Home SP3
Browser: Firefox is primary
 

A:Wireless internet not connecting (using dlink router)

Read other 16 answers
RELEVANCY SCORE 102.8

am trying to hook up dlink di-624 wireless router to a hughesnet satalite internet conection. hughesnet modem HN9000. have internet connection without router. when i hook up it shows router connectivity but no internet. have done all normal start up precedures. normal auto connect is not working. am not sure on the procedures for determining my sat modem ip address. but have tryed "MANY" different config. i know this is just a matter of knowing whick addresses go where and in the right order but i am at a loss!! please help. will return any info needed.basics as follows.pc machine with xp, latest service packs installed. d-link DI-624 wireless router, hughesnet HN 9000 modem.
 

A:help with dlink wireless router on hughesnet sat internet

To help connect the PC to the HN9000 directly and try to establish the Default Gateway IP Address using the commands below:

Hold the Windows key and press R, then type CMD to open a command prompt.

In the command prompt window that opens, type type the following commands:

IPCONFIG /ALL. This should work for any Windows version. The IPCONFIG /ALL display will provide a wealth of useful information for debugging your network connection.

Please post the info from this command both directly attached to the cable modem and again when attached via the DI-624 router?

Connect the HN9000 to the WAN port of the DI-624. Connect your PC with an ethernet cable to any one of ports 1 to 4.

Download the Product Manual at

http://www.dlink.com/products/?tab=3&pid=DI-624&rev=DI-624.

Page 12 of the Product Manual describes how to access the configuration but I think you already know?

Page 14 describes selecting Dynamic IP Addressing which works for most Cable Modems. This should just assign the router appropriate addressing and you should test internet connection with your PC in ports 1 to 4?

Page 15 describes Static IP addressing. You would need to check with Hughesnet as your ISP as to whether they have setup your service with Static IP addressing?

Finally on page 18 ensure you have DHCP enabled on the router and assign an IP address range like suggested 192.168.0.2 to 192.168.0.199.

In LAN setup the router should already be assigned IP address 192.168.0.1 and subnet mask ... Read more

Read other 2 answers
RELEVANCY SCORE 100.8

hi
I'need to congigure VPN with ADSL line.
that's poosible through dyndns feture.
but anybody know what exactly need to be configured to forward in the router.
because the wan port of the router will have the dynamic public ip that needs to be mapped with dyndns.
and than after VPN will be configured in the cisco Firewall.
please guide.
 

A:what to forward in Router to configure VPN in ADSL

Read other 8 answers
RELEVANCY SCORE 100.8

Hi friends ...

I hav bsnl broadband connection in my home.... I connected a tplink wired for browsing...

I also have a belkin wireless router..... I connected those routers.... And only wired communication is possible
and i cant access in wireless connection... Pls help me

i m sttuggling....
 

A:How to connect tp-link adsl router with belkin wireless router???

Read other 9 answers
RELEVANCY SCORE 100.4

I’m trying to install a domestic network with an ADSL Modem and a Wireless Router and I can’t get connected to the Internet.

Configuration:
ADSL Modem connected to the telephone line.
Wireless Router connected to the Modem.
Two PCs Windows XP connected to the Router (Ethernet 10/100).
Laptop Centrino Windows XP Tablet PC connected to the Router (wireless).

With this configuration I succeed linking the 3 computers sharing files but no one get connected to the internet (however, if I link them directly to the Modem I get the Internet, including the laptop if I use its Ethernet door).

It seems to me that the problem is in the Wireless Router configuration. I tried to configure it like the Modem, with no success. I also tried without any configuration and no success either.

Could someone kindly tell me what I’m doing wrong?

The material:
Modem ADSL Draytek Vigor 2600 (it is also a Router with 4 Ethernet doors)
Router ASUS Wireless WL500G (it has also 4 Ethernet doors)
PC1-Windows XP - Ethernet 10/100
PC2- Windows XP - Ethernet 10/100
Laptop Centrino -Windows XP Tablet PC – Intel Wireless 2200BG (it has also Ethernet 10/100)
 

A:ADSL Modem + Wireless Router = no Internet

Read other 6 answers
RELEVANCY SCORE 100

I am trying to decide between the Dlink DGL-4500 and the Netgear WNDR3700

Both support dual band/gigabit.

Anyone using either of these? Your thoughts?
 

A:Solved: Netgear vs Dlink router - your choice?

My personal choice would be the D-Link, but I suspect both will be similar. I haven't used either of them, so I base my opinion on my experience with other products from the two companies.
 

Read other 2 answers
RELEVANCY SCORE 99.6

I was looking at getting a wireless router (either a D-Link 615 or a Netgear Rangemax WNR1000) and I'm not exactly sure how to set it up. I have a BEC Technologies 7402 TM (NOT GTM) adsl wired modem/router that my telephone company gave me when I switched to DSL. There are 4 LAN ports on the back of the modem/router, a line port that my telephone cable is connected to, and a console port that I don't use. 2 of the LAN ports are being used. One is connected to my cable box, the other has an ethernet cord that runs halfway around my house, through a wall and into a wall jack that my desktop computer is connected to. I only want to use the wireless router to connect to my Wii and one laptop, I would like to keep my desktop connection wired. I had previously tried to connect to xbox live by connecting my xbox to one of the LAN ports but I could never get it to work, so now I just switch the ethernet cords between my xbox and computer in the wall jack whenever I want to use one or the other. Will I be able to connect a wireless router to one of the LAN ports and receive a signal or will I have to connect the wireless router to the wall jack that my desktop is hooked to, and run the connection through the router? I've never setup a wireless network before so I'm a little new to this subject.
 

A:Connecting a wireless router to an adsl modem/router

Hi:here are links to sample dsl modem router to wireless router configurations..
http://kb.netgear.com/app/answers/detail/a_id/1080
And for dlink:
http://www.dlink.com/support/faq/default.aspx?question=dsl
And the tried and true Johnwill,TSG tutorial on the same subject.
Your modem probably is a modem/router combo.Here are some possible fixes .

a. Bridge the modem/router unit so that it bypasses the router function and acts as a modem only. Or,

b. Change the address range used by one of the routers, say, to 192.168.3.x. Or,

c. Use the second router as an ethernet switch and wireless access point per the following recipe.


Connecting two soho routers in a network

Tutorial from Johnwill from the Networking Forum

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining chan... Read more

Read other 1 answers
RELEVANCY SCORE 98.4

So here is my case:

SETUP:

Verizon's Westell 6100:
Modem/Router, provides 1 incoming address (provided by VZ) and provides 1 internal address (192.168.1.1).

Netgear Wireless Router WGT624 v4:
Wireless Router, accepts 192.168.1.1 and provides 10.0.0.X wired and wirelessly.

Problem:
Although Verizon's Router indicates that it is on Bridge mode, the damn thing isnt. I thought the main concept of bridging was to become practically invisible and automatically reroute all traffic to the next device, which is what I want.
I want to ultimately use the Netgear device to set all my rules and settings, instead, I have to do it on both.
For instance, Xbox Live is not working 100% properly. I can only play video games without being able to join specific games, or perform any in-game video/voice chat.

I have tried NATing the device. No luck.
I have also tried setting the Netgear device as a Wireless Base Station. Either way, I just would like to have my network ignore 1 device, and have the second one invisibly reroute all the access.

Is that possible? Could you please help?

Thanks to all!
 

A:Netgear Wireless Router and Westell Modem + Router = Routed Bridge failure

Well, since the "modem" is supplying a private IP address, it's obvious that it's not in bridge mode, that can only happen with a NAT layer, aka a router.

Try this solution to configure it for bridge mode, direct from Verizon: http://www22.verizon.com/residentialhelp/highspeed/networking/setup/questionsthree/123756.htm
 

Read other 3 answers
RELEVANCY SCORE 98.4

I have been trying to find a way to connect, forward the signal, recieve the signal from my Verizon Fios wireless router up to my WGT624 V3 Netgear router.

Is there a way that I can modify my wirless port on my Netgear to recieve a signal wirelessly from my Verizon Wireless router?

My Neighbor did it once with another wireless router, but he can not remember how he did it. I am thinking it had something to do with the Firmware.

If anyone can help me with this that would be great.

I'm basically trying to push the wireless signal from my Verizon router in my basement, up to my wireless Netgear router which is recieving the signal on the main level so that I can plug my wired (non wireless) laptop into the ethernet port which is receiving wireless signal from the Verizon router in the basement in order to gain access to the internet.

Can this be done with the equipment listed above and or some additional firmware and configuration?

Thank you for all your assistance on this in advance.

MCAMPOS526
 

Read other answers
RELEVANCY SCORE 98.4

I have a Netgear ADSL wireless router DG834G. It works fine and the Internet is accessible from multiple computers. However, I want to know if it is possible to use the router to share files between the computers connected to the router. If one can how do I do this or go about finding out how to do it?
 

A:Netgear ADSL Router and sharing

yes,
whats windows OS on each PC - you need to enable sharing.

http://computer.howstuffworks.com/home-network.htm
http://www.homenethelp.com/web/howto/index.asp
 

Read other 1 answers
RELEVANCY SCORE 98.4

I have Qwest/CenturyLink DSL, and recently replaced the Actiontec M1000 modem which crapped out after 5 years of service. Replaced it with a Netgear DM111PSP v2 router/modem. Now I cannot get either of my two routers, the Linksys WRT54G or WRT160N V2 to broadcast wireless internet. I've spent the most time on the WRT160N. It will broadcast a wireless signal, but devices that attempt to connect to the internet time out while "obtaining IP address". BTW, I just happen to have two wireless routers on hand, I only need one to work.

I can get internet through the hard wire connection. I have the Netgear modem hooked up to the "internet" port of the WRT160N router, and the computer is connected to one of the four ethernet ports on the back of the router. I can access both router and modem setup pages using this setup. The Netgear modem is set up for DHCP server, PPPoA encapsulation, and gets its DNS address dynamically from the ISP. The WRT160N is also set up for automatic DHCP configuration. These are the settings given by running each set up wizard, and this has set me up for some DHCP conflicts.

I think that setting up a dual modem/router in transparent bridging mode (PPPoE) in theory turns off the DHCP, allowing the WRT160N to handle DHCP, but I have no luck even getting my hard-wired internet connection to work if I switch from PPPoA to PPPoE mode. Even if I cut the WRT160N out of the loop and connect the computer direct to the DM111PSP. No internet,... Read more

A:Connecting WRT160N v2 wireless router to Netgear DM111PSP router/modem

Netgear DM111PSP v2 router/modem.Click to expand...

ifthis is a router then you need to connect the other two routers using their LAN inputs NOT the WAN/internet - unless you set the DM111PSP to bridge mode
you may have already covered the below - but check
see here
------------------------------------------------------------------------

Connecting two (or more) SOHO broadband routers together

Connecting two (or more) SOHO broadband routers together
From a John Will Post

http://library.techguy.org/wiki/Connecting_two_SOHO_broadband_routers_together

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

C... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello, Here is the scenario:
I have been using Wireless ADSL Router (Planet ADW-4401) that has one WAN Port(RJ-11) and 4 LAN Ports (RJ-45). I used it to connect to the internet but recently i switched my ISP now I use cable internet (cat 5 cable that i directly plug into my NIC) and use username & password to connect through a PPPOE connection.
can i use my adsl router to connect to my cable internet?? so that i can use my desktop connect to the router througl lan and my laptop to connect through wireless.

thanks in advance.
 

A:Solved: Can Wireless ADSL Router be used to connect Cable internet?

Read other 10 answers
RELEVANCY SCORE 98

ok so i hav an adsl router modem. It has 1 ethernet output and 1 usb output.
I bought a wireless access point 2day and tried 2 connect it up so i can connect to the net on my laptop.

The adsl modem is connected to the desktop via USB. and then connected to the wireless access point via ethernet. However the access point does not seem 2 b picking up the adsl modem. The modem can be used with the ethernet and usb cable at the same time.. But the router has no internet connection. any1 know wat i need 2 set up or anything? thnx

adsl modem router - iConnect access 621
Wireless access point- TP-LINK TL WA601G
Diagram of wat im trying 2 do---


Desktop -----USB----- ADSL
modem/router ------ETHERNET-------Wireless
access point ------Laptop
 

A:Wireless router connection to ADSL router

You might need to check the settings of the ADSL modem, perhaps it has a Mac filtering option enabled which prevents another computer from connecting to it without first adding the Mac address in a list of authorized devices on the modem.

Also in the WiFi router's web interface, can you see the status of the Ethernet port ?
 

Read other 5 answers
RELEVANCY SCORE 97.2

After a series of computer and network failures, mostly due to electrical storms and electrical contractors, I decided to upgrade my old Netgear router to a new Netgear Wireless-N router.

I have used Network Magic to manage my networked computers and when I decided to upgrade NM, the new version didn't support my old router. So, it seemed like an all over upgrade/update was in order.

What should have been a simple process-- turn everything off, disconnect the old router, replace it with the new router, and go through the set up process (cable modem on, then router on, etc.) has turned into a mystery.

I used the Netgear startup wizard, followed step by step (more than once) and each time I got to the last part of the process, it stalled saying "No Router Found."
It was only after several unsuccessful attempts, that I decided to open my control panel and check things out. Network Connections showed my status as "connected," so I opened my browser and found that I am able to connect to the internet.

What I have not been able to do is to set up my network, network security, etc. I tried to initiate Network Magic for set up, with the same results-- "no router found."

Anyone know what I have going on here? Am I only connected through the LAN connection, perhaps?

To make matters further complicated, my phone service is Vonage, VOIP, and the Vonage device has failed, so I'm waiting for the new one to arrive...can... Read more

A:Replacing Netgear wireless router - router not found

let's establish what IS working and then deal with Network Macgic

I assume these simple tests all work:
ping the router address using the ip address
nslookup www.google.com. returns an ip address (notice the period after .com)
ping www.google.com works
and tracert www.google.com works also
and your browser has no problems (just the be sure)

Here is what I see; I assume you have everything EXCEPT the router



Uploaded with ImageShack.us
 

Read other 16 answers
RELEVANCY SCORE 97.2

hi i have had the Belkin ADSL Modem with Wireless-G Router for a while now and have had a tesco's 2.2mbs connection but i have just upgreaded to a tiscali 8mbs connection, i no i can get the full 8mbs speed through the supplied modem but am just wonederind if the Belkin ADSL Modem with Wireless-G Router's buitl in modem is fast enogh to get the full 8mps or if it wil run slower. would be great to no i was just wondering
 

A:Belkin ADSL Modem with Wireless-G Router WHAT IS ITS MAX INTERNET CONNECTION SPEED

There THe belkin modem/gateway shouldnt limit your speed capabilities. You should be able to find the speed listed inside the modem's status page. To do this..
Click start>run>In run type CMD
In the black window type IPCONFIG and then enter. Note down your default gateway.
Open a browser window and enter the gateway's address into it. Click go
This should take you to your gateways graphical user interface.
Look for a status tab or see if it lists connection speeds on the general page.

Also you can test speeds at different sites. Google search broadband speed test and choose 1 of the millions of sites
 

Read other 2 answers
RELEVANCY SCORE 97.2

I need some help with a wireless router - D-Link Wireless ADSL Router G604T -- I am trying to set it up so that I can access the internet on my home desktop pc. I need to get this working as where the pc is currently situated there is no phone socket and at present I am currently running a cable along the floor each time I need to use the internet. The router is in the room next door connected to the power supply and to the phone line.

I have set up the router as per the instructions, I have set up my ISP settings onto the router as I should have. My pc can see the router, I can ping the router and I can access the menu inside the router via the IP of 192.168.1.1 --- All this part works fine, under the status buttons on the router menu it does say that the dsl connection is connected and it does aquire an IP address for the internet, However I cannot access the internet.

When I try and access the internet I get the standard "This Page cannot be displayed" Message. I have tried all the settings that I can think of but I still cannot get the internet working. I can also attach my xbox to the router via a crossover cable and the pc can detect my xbox and I can ftp into it.

I'm using Windows XP Home Ed and the router is in the room next door.

Any help that anyone can offer would be greatly appreciated - also if you need need any more information just let me know.

Thanks.
 

A:Solved: D-Link Wireless ADSL Router G604T - Internet Connection

Read other 16 answers
RELEVANCY SCORE 96.4

After months of paying $55 a month for Comcast cable, I've decided to give cheaper Qwest DSL a try. My cable setup is D-Link DCM-202 cable modem -> Vonage VT1005V voice terminal -> Netgear MR814v2 wireless router. With cable service my Vonage worked fine as did the wireless router/internet for my laptop.

I just replaced the cable service with Qwest DSL (with GT701 DSL modem). DSL works fine if I connect my laptop directly to the DSL modem. When I add the Vonage modem and the wireless router, I can't get to internet anymore (wireless). Vonage still works fine and I can access the wireless router from my laptop, but can't get to internet.

Any help would be appriciated.
 

A:Can't connect to internet using Qwest DSL/Netgear wireless router

Read other 9 answers
RELEVANCY SCORE 96

Hi, my friend is in Japan, and he's signed up for NTT's ADSL service, They say he can 'rent' a modem, but he would need to get a router too if he wishes to use more computers. However he doesn't want a 'multi-box' solution, he wants it in 1 box (like in other countries), a combination ADSL Router/Modem with Wifi. However, he cannot buy them in a few computer stores he has visited. I am visiting him soon, and we're trying to understand if I bring over an ADSL router, if that would work.. I know about the power limitations, but that aside, can it work?

ps. Thinking of bringing something like the following models ( I will purchase once I know for sure )...
Netgear DG834GT 108Mbps Wireless ADSL Modem
Belkin ADSL Modem with Built-in 125g Wireless Router
Linksys by Cisco WAG54GS Wireless-G ADSL Modem Router

pps. I see a lot of modems listed on Amazon with ADSL2, I don't think they have ADSL2 in Japan (according to wikipedia), would ADSL2 modem work with ADSL.?

MANY MANY Thanks if anyone can answer this
 

A:Can an ADSL Wireless Modem Router work with NTT's ADSL service in Japan

Read other 6 answers
RELEVANCY SCORE 95.6

Hello,
I have a broadband connection with Tiscali (UK) via a USB ADSL WAN adaptor modem. I have had over months now terrible problems with the connection dropping out. Sometimes it will stay up for a day, sometimes it's dropping every hour or so. Very annoying. What's more annoying is that it will not automatically reconnect. If you set it to redial automatically you get a no dial tone error message and you are forced to reboot to get the connection back up. If you leave it for more than an hour, then try to reconnect it usually will. This is not an automatically always on connection from the moment you turn your machine on, you have to manually open the connection. XP classes it as a dial up connection really with ADSL settings.

I've done everything Tiscali has suggested, all the obvious stuff (RJ11 cabling all the way to the modem instead of phone extension cable part of the way etc. etc.), but this is doing my head in now. Good and proper.

So, I've acquired a Netgear DG834G V2 router in the hope that I can get an always-on connection and if this doesn't solve the problem completely, at least if the connection drops out for whatever reason, when the connection comes back it will be resume automatically, so if I'm downloading or whatever it will just carry on.

But I've hit an immediate problem. I've already been using it as my network hub without any problems for a few weeks. But when I tried to go to http://192.168.0.1 as mentioned... Read more

A:Can't connect to Netgear DG834G router to configure for DHCP

eVILRigby said:

...
My machine's address is 192.168.0.1 but I even reset the TCP/IP stack to see if it would resolve the problem and it didn't.
...
Click to expand...

So does that mean you have the IP of the "machine" (your PC??) manually set to 192.16.8.0.1? You need to change that (on the PC) to either be any IP addr, other than 192.168.0.1, in the same subnet or set the PC to automatically get IP from the router.
The DG834G factory setting should be DHCP server by default.
 

Read other 1 answers
RELEVANCY SCORE 95.2

I'm wondering maybe someone could help me or make a good suggestion/advise!
I'm little bit worried. I bought wireless netgear dg834gsp ADSL modem router, but i don't have ADSL connection. I have cable connection. Does this mean that my router is unusuable for my PC and my internet connection? Maybe there is some hope to make connection? I don't have any possibilities to change it, because I bought it abroad.
 

A:netgear dg834gsp ADSL modem router connection problems

You can connect/configure it as an ethernet switch (if it has multiple LAN ports) and wireless access point, but you cannot use it as a router except with ADSL internet service.
 

Read other 2 answers
RELEVANCY SCORE 95.2

Hi,

I bought a NETGEAR RangeMax Wireless Router WPN824 but I don't get internet connect from it. I have a comast modem it's a RCA by THOMSON witch I can connect to the internet with a ethernet cable.
 

A:NETGEAR RangeMax Wireless Router WPN824 No Internet Connection.

The following procedure should get you a connection with any broadband modem that is configured to use DHCP for the router connection, such as cable modems, and many DSL modems. If you require PPPoE configuration for the DSL modem, that will have to be configured to match the ISP requirements.

Note that the wireless encryption and channel selection will have to be done after the basic wired connection is established, the first step is to get wired connections working.

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.
Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

When the computer is completely booted, let's see this.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous command output!

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 206.190.60.37

PING yahoo.com

Right click in the command ... Read more

Read other 1 answers
RELEVANCY SCORE 95.2

Hello!

I have D-Link DSL 320T ADSL Modem and Belkin N+ Wireless Router.
The modem works great on its own connected to the network card in my laptop.
The problem starts when I connect it to the router (doesn't matter wired or wireless connection). The internet works but slower and sort of 'snaps' every few seconds. To give you an example, when I use skype the sound and picture freezes every few seconds or when I click on different websites in my browser, every few seconds I get the 'not connected to the interent' screen - I have to refresh and it loads fine.
All those problems dissapear when I connect the modem to the network card of my laptop.
I tried few things and this is what I found out:
1. When I switch the router into Access Point mode it works great (wired and wireless) as if it the modem was connected straight to my laptop - no snaps, skype works great.
2. It doesn't help when I turn the firewall off in the router
3. It doesn't help when the QoS option is enabled
4. The router is fine as it works great with cable modem

I think maybe there is something wrong because of DHCP option enabled in both devices.

Here is my ADSL Modem Config
DHCP ON
Starting IP 192.168.1.2
Ending IP 192.168.1.254
Subnet mask 255.255.255.0

Here is my router config
DHCP ON
Starting IP 192.168.2.2
Ending IP 192.168.2.100
Subnet mask 255.255.255.0

Please Help
 

A:D-Link DSL320-T ADSL Modem + Belkin N+ Wireless Router Internet Performance Problem

Read other 16 answers
RELEVANCY SCORE 94.4

hi
I have a ADSL router and wireless router. they connected together the wireless router connected to the adsl router by ethernet cabel but when i try to acces to ping ip that in the wireless router from the adsl router i faild and when i try to ping ip that in the adsl router from the wireless router i Succesed what can i do ?

sorry about my low english
 

A:Adsl router with wireless router

What are you trying to do? If you want everything to be in one Local Area Network connect/configure the wireless router as follows.

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. [You will not need a cross-over cabl... Read more

Read other 1 answers
RELEVANCY SCORE 92

I've currently got a 512kb/s adsl connection but will be moving to a faster 1mb/s connection in next 2 months.In meantime I need to get my other PC to share same connection. So must be wireless. As I understand it a 4 port wireless adsl router means that basically you have an adsl modem that not only controls upload/download link to the internet but lets u plug in 4 PC's hardwired into modem? and then as well as that connect wirelessly?

I'm only looking to connect two PC's to it...one hardwired in and the other wireless equipped with a USB wireless stick.

Would this be suitable?

http://www.ndo.com/ndo/Products/Voyager_2100_ADSL_4_Port_and_Wireless_Router_(802.11g)/prdvoy2100router.html
 

A:Sharing internet using ADSL. Which router/adsl modem to buy?

I suppose this is what your ISP is trying to sell you..

It will probably work, but I would recommend a product from a brand manufacturer who will actually release patches and support you after two years.

Look for similar products from Linksys, 3Com, SMC, D-Link, Netgear
 

Read other 5 answers
RELEVANCY SCORE 91.2

I hope i am at the right forum
I am trying to installed in my windows xp media center computer but somehow when I plug the ethernet to the wireless router and the ethernet from computer to router my internet does not work. Is it possible that my computer does not handle the router.
Please help.
Thank you
 

A:DLink wireless router

Read other 10 answers
RELEVANCY SCORE 91.2

Well I bought the Dlinki dir 615 router not too long ago, it's a lil outdated but it was cheap so I figured why not buy it. It comes with a easy install CD, however for some reason I can't get through it. It goes all the way through until it gets to the verifying router settings during step 7 of the process, I always get the Error 302 internal error. Is there something my computer is missing or am I just doing something wrong?
 

A:Dlink dir 615 Wireless N Router help

Read other 16 answers
RELEVANCY SCORE 91.2

Having issues with the WEP key on this device. When I disable the WEP, it works, but when I enable the WEP and put the key on my wirelss laptop, it doesn't connect. Can't get and IP address. Anyone have any suggestions?

Thanks!
 

A:Dlink wireless router DI-714 Help

Look for router firmware and adaptor driver updates. If none, restart (or power cycle) the router; uninstall the adaptor, restart the computer, reinstall adaptor. Sound stupid? Yeh, but sometimes this junk gets things working.

Make sure you are using same characteristics on both devices; that is, both 64-bit or 128-bit, and the same key (1st, 2nd, 3rd or 4th). You ARE using a hexadecimal key, not a passcode, right?
 

Read other 1 answers
RELEVANCY SCORE 90

im having a problem with my router which is a dlink di-524. i have sbcyahoo dsl as an isp. i looked at the dlink tech support website and it said that sbc yahoo might affect the performce of the router. sometimes it works and sometimes it doesnt. if some one could give me some pointers i would appreciate it.
 

A:wireless router problem with dlink di-524

Read other 9 answers
RELEVANCY SCORE 90

I am having a terrible time getting my new DLink DI-524 wireless router set up and working correctly.

I am using a cable modem and have 2 desktop pc's, 1 laptop, and a PS2 plugged into the router.

*** I am already on a wired router by LinkSys and I think maybe that is part of the problem going from an already wired router to a wireless....maybe not? ***

I unplugged everything and plugged in my new DLink Wireless and put a cat 5 cable from the cable modem to the new DLink the WAN port. Then connect my main desktop pc with a cat 5 to the port 1 on the DLink Wireless.
I ran the setup and that seemed fine. I rebooted and connected other pc's and my laptop and got the DLink software drivers installed for my wireless card.

I then run the wizard to configure and set as Dynamic DHCP which it should be.
It shows my LAN MAC Address is 00 11 95 55 28 4E (which was old LinkSys wired router I have now hooked up).
The WAN MAC address is showing 00 04 5A 65 EB FF (which is new wireless router by DLink). The factory host name shows DI-524, not sure if I need to change that or not. ** I have tried changing the WAN MAC to show the LAN and it doesn't work still.

The problem I am having is all pc's are networked together when I am done...my laptop can wirelessly access all other pc's on network, but NONE can get on the internet. Page cannot be displayed!! THIS IS A HEADACHE!! What am I doing wrong?

Please help!! Would be GREATLY appreciated!!

P.S. Internet wor... Read more

A:Problem with DLink Wireless Router...

Did you power cycle the broadband modem? It's still looking for the MAC address of the old one, when you power cycle it, it'll find the new one.
 

Read other 3 answers
RELEVANCY SCORE 90

Hi, looking to get a fast wireless router.

I saw the D-LINK XTREME G 108mbps router and it looks very very nice.
I am currently using a WIRED linksys router that WORKS GREAT, thats why I do not know if i should go to D-link for wireless, or go with a linksys wireless G router (but they only go to 54mbps).
what are the pros and cons of each? - speedwise, firewall/security-wise,etc.

thanks
 

A:which is better wireless router - dlink or linksys!?

Which is the better car, Ford or Chevy? It's the same kind of question, and it'll get the same variety of answers.
 

Read other 1 answers
RELEVANCY SCORE 90

Hey folks.

Heres my deal. I have a DI524 Dlink wireless router, connected to a SATT. broadband modem. I have 8 computers running XP Home/Pro connected to the router. Most of the time everything works fine. To extend my range, I got 2 range extenders (dlink as well). Again everything worked fine. Every now and then though, I will get a Windows system error: ip address conflict with another system on the network error, but I can still connect to the internet. The real problem lies where as just out of the blue, on random computers, I loose my connection to the workgroup. I try clicking on my network places, and then view computers in workgroup, and it says I cant connect because I dont have permission or something like that. If I reset the computer, usually all will correct itself.

Any reason you can think of that is making this do this?

All the computers are all up to date with Service Packs.

Cheers
 

A:DLINK Wireless Router & Problems

I find it is a good practice to cycle the router and the modem on a regular basis. Just unplug the power for a few minutes each week.
 

Read other 1 answers
RELEVANCY SCORE 89.6

Heres my dilemna, I have installed a netgear wireless router for me (Win2000) and a usb wireless nic card for another pc in the house, to share my internet connection. The router seems to be configured correctly, i have a cable internet connection so my router is configured for dhcp to get ip's from the cable connection my pc runs flawlessly, i also have inplace the necessary wireless security. But my issue is the other (Win98) wireless workstation, it can see my SSID on the network and my connection is reading at 65% but it doesnt seem to see the router i have the worstation configured for dhcp from the router but for some reason they dont see eachother I dont understand why? if i run ipcofig on the win98 pc i get a apipa address instead of a dhcp ip address that my router should be pushing out just like it does for my pc??? I think im missing a major step here but i cant see it...
 

A:Solved: Regarding Netgear Wireless Router and Netgear USB Wireless nic card...

Read other 12 answers
RELEVANCY SCORE 89.2

Hello,
I recently switched from BrightHouse (cable internet) to Embarq (DSL). I used my dlink router with the cable internet and no problems and no configuration for the router, everything worked fine.

We are now on Embarq DSL and the wireless isnt working. I tried changing the IP, etc in the router configuration and nothing I have tried worked.

If someone has had the similiar issues that has been resolved, please share with me

Thank you!
 

A:Vonage Dlink Wireless Router with Embarq DSL

Read other 9 answers
RELEVANCY SCORE 89.2

Recently the router has been dropping the wireless connection, and now is not connecting with the computer - the ethernet still works. It was suggested to upgrade the firmware but I can't access the configuration.

I've tried admin, and blank password which is supposed to be the default. I've also tried XXXXX as password, and another username and password in case I had altered it for security. It doesn't allow me in.

I've rebooted the router, and also reset it, all to no avail. Is there any way I can over ride this to get into the configuration?

Many thanks
 

A:Solved: Dlink DIR 600 wireless LAN router - can't access

Read other 15 answers
RELEVANCY SCORE 89.2

I just got the sweet DLINK DI-624 108MBPS wireless router, and I gotta say it's pretty solid, but like all things, it seems to have a few kinks... so far I've found 2 big ones:

1. Even though I can set the gateway IP to 192.168.1.1 and start the pool at 192.168.1.2, it won't dish out IPs. If I stick with 192.168.0.x, it's fine. Sounds like a firmware bug

2. After setting the gateway IP to 192.168.0.100 and the IP pool starts at 192.168.0.101, it looks like the DLink is still "holding" 192.168.0.1.

Item #2 is the biggie for me... I *must* have Internet Connection Sharing enabled on my netcard, as I also have a virtual ethernet adapter installed for use with the EXCELLENT Mac emulator Pear PC.

The problem is that even though nothing on the DLink or the network is using 192.168.0.1, I can't enable ICS. It doesn't choke in the normal immediate way right off the bat... when I enable ICS, it works, but then I get a dialog that I haven't seen before:

"An error occurred while Internet Connection Sharing was being enabled.

Internet Connection Sharing cannot be enabled.
A LAN connection is already configured with the IP address
that is required for automatic IP addressing."

So, I guess my questions are:

1. Has anyone else run into issues with their DLink router holding the 192.168.0.1 address even though it is not in use in configuration settings?

2. Has anyone gotten their DLink router to use a 192.168.1.x range successf... Read more

A:192.168.0.1 held by DLink DI-624 wireless router even though it's not in IP Pool

Idudex,

192.168.0.1 should not be in the DHCP Scope of available addresses. The router will not give itself a DHCP Address, since your Default Gateway's IP (192.168.0.1) should be static. 192.168.0.1 through 192.168.0.99 are usable static IP's (not that any home user needs all those).

D-Link chose 192.168.0.100 through 192.158.0.200 (I think) for the DHCP Pool of available addresses. You can still use 192.168.0.1 through 192.168.0.99, and 192.168.0.201 through 192.168.0.254 for other things if you would like. You would just have to statically assign those.

I have had fluky performance when changing IP schemes on Linksys routers, although I haven't done this on a D-Link yet. You could try changing the DHCP Scope first, then changing the Router's IP (if it will let you change in that order), rebooting the Router, and doing a release/renew on your computer's IP after the Router has rebooted.

Does all this make sense?

Sincerley,

Ted LeRoy
MCSE(NT/2000), CCNA, A+
Need Antivirus, Firewall and Spyware Removal software?
Check out: http://www.homecomputeraid.com
 

Read other 1 answers
RELEVANCY SCORE 89.2

Setup of Wireless Router in 10.10.250.x range

Hi,

We have a DLink wireless router (n150)

Our IP network range is 10.10.250.x

I want to connect this router to a ethernet cable and be able to use it for wireless and also connect one or two physical computers to the back of the router (as it has 3 extra ports).

When I connect the router and have it issue DHCP in the 10.10.250.x range - the router gets a IP address of 10.10.250.209

As a result, if a computer is physical connected to the router, that pc get the gateway of 10.10.250.209 - while our really gateway is 10.10.250.1.

This causes the internet not to work on that pc.
I have tried to have the router issue IP's on the range of 192.168.1.x but the problem is then on my wireless clients I am not able to connect (map) to shared folders since the network IP range is 10.10.250.x (and hence different subnets).

Can somebody please help?

Thanks
 

A:Setup of DLink Wireless Router in 10.10.250.x range

What is the modem used with this router?

Are you connecting this router to another router, or directly to a broadband modem?
 

Read other 3 answers