Over 1 million tech questions and answers.

System Restore not working.

Q: System Restore not working.

I'm having a problem with System Restore working. I'm trying to restore back to a point, and after rebooting and logging in, the Restore gives me a message saying "Restoration Incomplete" and tells me that no changes were made. I don't know what to do anymore.
I found another thread that advised turning off Symantec security, but I use AVG, and chances are, it was on when the restore point was made. I'm new here so I'm not sure if this is the right place to post.
I use a Windows XP Home.
If any more information is needed (I'm not sure) just tell me.

RELEVANCY SCORE 200
Preferred Solution: System Restore not working.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: System Restore not working.

Read other 11 answers
RELEVANCY SCORE 56.4

I have Windows Defender and McAfee Security Center anti virus softwares.When I run them they are telling that I does'nt have any virus.But I am unable to Go to previous restore points and many exe files are missing in the C:\Window\System folder."Warning! Spyware detected on your computer. Install an antivirus or spyware removal to clean your computer." error came on the desktop.Whole desktop was white with an orange color box in between with the above warning.Antivirus2008 something like that was installed on the desktop and in the control panel...so 1. first I removed the software icon from the desktop and the control panel.Next I went to System32 and removed the recent files.2, But I was Unable to restore to go to a previous date to get rid of the virus.My System restore is infected I believe.I don't have that much knowledge in this field.So kindly let me know in detail what I can do to remove the whole virus.Yes System restore was working properly before.I noticed this as soon as the the virus came. I have ran the Malwarebytes Anti-Malware but still I am unable to go back to my previous system restore points and system is operation very slowly...Please find the log file here:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:18:56 AM, on 8/20/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system3... Read more

A:Unable To Restore My System To Previous Dates, Clicking On The Back Arrow On The Restore Calender Is Not Working

Hello Ashakins and welcome at BleepingComputer,Sorry to have kept you waiting for so long, but the forums are really busy.If you still need help :Please don't run 2 active virusscanners at once, make a choice and remove the other one completely through Control Panel > Software, along with SweetIM.1. * Clean your Cache and Cookies in IE:Close all instances of Outlook Express and Internet Explorer Go to Control Panel > Internet Options > General tabUnder Browsing History, click Delete. Click Delete Files, Delete cookies and Delete historyClick Close below.* Clean your Cache and Cookies in Firefox (In case you also have Firefox installed):Go to Tools > Options.Click Privacy in the menu..Click the Clear now button below.. A new window will popup what to clear.Select all and click the Clear button again.Click OK to close the Options window* Clean other Temporary files + Recycle bin Go to start > run and type: cleanmgr and click ok. Let it scan your system for files to remove. Make sure Temporary Files, Temporary Internet Files, and Recycle Bin are the only things checked.Press OK to remove them.2. After reboot,Start HijackThis, close all open windows leaving only HijackThis running. Place a check against each of the following, if still present :O2 - BHO: (no name) - {02478D38-C3F9-4efb-9B51-7695ECA05670} - (no file)O4 - HKLM\..\Run: [SweetIM] C:\Program Files\SweetIM\Messenger\SweetIM.exeClick on Fix Checked when finished and exit Hij... Read more

Read other 1 answers
RELEVANCY SCORE 55.6

Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.

A:Automatic restore points is not working in system restore

Hello Rocasan,

Double check to make sure that System Protection is turned on for your Windows drive.

Next, use the free program CCleaner to see what it shows for what restore points you may have like below.

Hope this helps for now,
Shawn

Read other 13 answers
RELEVANCY SCORE 55.6

So my little sisters boyfriend deleted all the history on my Google Chrome, 'to free up space' and I think he's been on something weird on my laptop, and want to find out. I googled how to get the history back and the other thing I fully understood was to do a System Restore to back before he deleted it. I did that three times to different points in time, definitely before he did it and it hasn't changed anything. If anyone else has any ideas they would be much appreciated, although please bear in mind I'm not massively great with computers! Thank you
 

A:How to restore Chrome history, system restore not working?

I don't think you can get it back unless you had a backup, System Restore doesn't affect data so that's why it doesn't work.

Why do you need the History restored anyways?
 

Read other 3 answers
RELEVANCY SCORE 54.8

When Im trying to resotre the system restore. It give no effect.
When Im trying to create the restore point. It gives the follwing message "System restore is not able to create a resotre point. Please restart the computer, and then run the system restore again"

And also I have update problem in the F-Secure anti virus.
And also I have a booting problem, after boot windows xp icons apperars when I was click any icon it hang.

A:System Restore is not working creating/Restore

click on start then control panel then system in there you should see system restore. clcik on it , make sure you tick off Turn off on all system drive then click ok then go back to restore again. unless you have corrupted window which means you need a new window installation. good luck

Read other 1 answers
RELEVANCY SCORE 54.8

When I try to back up and restore (my files) it does not complete. I get the message disk full. I tried to uncheck the (shut off and delte all files from system restore) but that does not help. When I check the amount of space available on the D drive, it shows as full, but system restore seems to work; any suggestions?

A:Backup and restore (Not System Restore) Not Working

What are you using to backup your system?

Read other 3 answers
RELEVANCY SCORE 54

Hi!
I recently noticed that when I do a Google search, the link redirects me to random ad sites, making it nearly impossible to get to the page that I want. I tried System Restore, only to realize it won't let me go past the last step. Also, my CD/DVD drive doesn't seem to be working. You can watch movies and discs in the drive, but it will not recognize a blank disc for burning music or photos.
I have AVG, and it has only detected tracking cookies. I scan with Malwarebytes on a regular basis, and it never seems to find anything. I scanned with AdAware, and it detected tracking cookies as well. I clean out my Cookies and Temporary Internet Files folder quite frequently, but I can't seem to fix the problem.

Thanks for your help!

A:Google links redirect, CD/DVD drive not working, system restore not working.

Please download RootRepeal Rootkit Detector and save it to your Desktop. * Close all programs and temporarily disable your anti-virus, Firewall and any anti-malware real-time protection before performing a scan. * Click this link to see a list of such programs and how to disable them. * Create a new folder on your hard drive called RootRepeal (C:\RootRepeal) and extract (unzip) RootRepeal.zip. (click here if you're not sure how to do this. Vista users refer to this link.) * Open the folder and double-click on RootRepeal.exe to launch it. If using Vista, right-click and Run as Administrator... * Click on the Files tab, then click the Scan button. * In the Select Drives, dialog Please select drives to scan: select all drives showing, then click OK. * When the scan has completed, a list of files will be generated in the RootRepeal window. * Click on the Save Report button and save it as rootrepeal.txt to your desktop or the same location where you ran the tool from. * Open rootrepeal.txt in Notepad and copy/paste its contents in your next reply. * Exit RootRepeal and be sure to re-enable your anti-virus, Firewall and any other security programs you had disabled.Note: If RootRepeal cannot complete a scan and results in a crash report, try repeating the scan in "Safe Mode".

Read other 8 answers
RELEVANCY SCORE 53.6

Accidentally deleted important files, system restore not working
I accidentally deleted some important files when trying to free up space on my laptop. Now, when I startup, it cannot go to my user. I lost my email settings, other functions. My docs are accessible by going to 'My Computer' then to drive C: then to the user, etc. However, from my Start menu, I can't get to them by simply clicking 'My Documents'.

I've tried to do some 'repairs' using Microsoft Knowledgebase but so far have been unsuccessful. I tried some of the suggested things and have made alist of many of the files that are missing when I tried to do a system repair. These files are not in the recovery section c:\windows\ServicePackFiles\i386. The list is here:

Lmmib2.dll
spider.exe
clipbrd.exe
hostmib.dll
staxmem.dll
admexs.dll
appconf.dll
iisadmin.dll
iisfecnv.dll
infocomm.dll
iscomlog.dll

I ran HiJackThis and the results are below.

any ideas would be helpful.
Thanks.
Carol

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:41:47 PM, on 4/24/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Intel\Wireless\Bi... Read more

Read other answers
RELEVANCY SCORE 53.6

I have windows 7 home premuim 64 bit
I went to create restore point on my new dell and after about an 1/2 hour of waiting for SR to open up I got this:

You have no Restore Points. Use System Protection to create restore point.
When I attempt to turn on System Protection, it doesn't show any drives available when it opens -- it just says that it's searching for available drives and it keeps searching and doesn't stop. Eventually, I'll receive the following Error Message:

"There was an unexpected error in the property page: System Restore encounter an error. Please try to run System Restore again (0x81000203)." also all button are greyed out. I wanted take an image to show you but that's not working either. Is there hope?

Thank you.

 

A:Windows 7 Home Premuim System Restore and System Protection not working.

Read other 16 answers
RELEVANCY SCORE 52.8

Hello to all,

A month back I accidentally deleted the wow6432 node from my registry under system_user. I believe this is the root of all my problems. Once I did that, my toshiba c885 D 64 bit would not boot. I forced the computer to shut down and pressed f12 to get to the system recovery options. I then restored to a point before my blunder. Well, my laptop worked for a while and then magically the screen goes black and will not reboot. I did sestem restore a few more times since I could get a little bit of work done in between restoring and the screen turning black again. After I was fed up with having to run system restore every other day, I decided to run system refresh to keep my files but reset everything else. After restoring I am getting the same problem and find myself again running system restore every other day just to keep working.

My questions are if I completely reinstall windows 8 and start from scratch, will this definitely solve the problem? I thought system refresh would have worked, so I'm not sure. Also, are there any other available options for me to fix my computer without starting from scratch?

Thanks so much in advance! -Aaron

A:System Restore and System Refresh not working completely!

Hi awrontherise,

Since you did not provide your specs, all my suggestions are just speculative in nature; however, I can tell you that a clean install will fix all system software corruption but if you also have hardware and/or driver issues they will have to be addressed separately. So, based on what you have told us so far, I would recommend this as your first step:

Repair Install Windows 8

Now, if the above doesn't work, you may have to take this route:

Clean Install - Windows 8

Good luck.

Read other 4 answers
RELEVANCY SCORE 52.8

Hello,
I will try to explain this as best as I can so if you need any more information please ask and I will gladly answer. If this is in the wrong forum I apologize. If it is please redirect me and I will post it there.

I have built 11 computers, all containing the EXACT same hardware and software. I install windows 7(64bit), all the drivers for each component, and activated the copy of windows. The pc will run completely fine running any program I ask it to. The problem does not happen until I reboot the computer, now this is not always on the first reboot. These computers could last a few days and then I reboot and it all breaks. When I randomly reboot the system it will boot up showing problems and asking for a system restore. So I do the system restore and reinstall a few drivers and the same problem will persist.
I eventually get fed up with the whole process and decide to completely reinstall Windows thinking maybe I could have done something wrong(been doing this for 15 years no problem but it happens). After a completely random(as far as I can tell) amount of time and reboots the system will do it again. I am completely stumped on this issue and could really use the help. I have managed to get 2 working for a few weeks now but they hard bent cpu pins from the factory and I straightened them out. The other ones I have checked and they are fine(so it seems).
The System is running an ASUS P8Z77-v PRO motherboard, EVGA Nvidia 650 TI graphics card, i7-3770 CPU(may be an... Read more

A:System Working fine but reboots to system restore

Check your ram.
Memory Diagnostics Tool
Memtest86+ - Advanced Memory Diagnostic Tool
How to use memtest:
RAM - Test with Memtest86+

Also check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

Read other 5 answers
RELEVANCY SCORE 52

The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair. Please help me. My Aunt got me this laptop for my High School graduation and I cannot afford to have someone fix my computer right now.
 

A:System Repair/System Restore not working

Does the computer come with system repair disks? Or even better, does it come with a Windows disk?
 

Read other 3 answers
RELEVANCY SCORE 51.2

I have the Windows 7 64-bit Home Premium operating system. I want to do a system restore but I keep getting the error message that Windows was unable to restore my system because it could not access a file (Error 0 x 80070005). The error message suggested turning off any antivirus programs. I tried turning off Bitdefender, as well as my firewall, but that didn't help. I also tried doing the system restore in Safe mode, but that didn't work either (I got a different Error Code in safe mode: 0 x c0000022. I ran system scan from the command prompt to see if I am missing any system files or any system files are corrupted. Everything looks OK. Checkdisk did not find any problems either. I checked to make sure System Restore is turned on, and it is. Any ideas about what is preventing System Restore from doing a successful restore?

Shrimpman
 

A:System Restore not working

Read other 6 answers
RELEVANCY SCORE 51.2

System Restore has stopped working. I cannot un-do the last restore or restore to any earlier point. My every attempt results in the a message saying the operation was unsuccessful. Any suggestions would be appreciated!
 

A:System Restore not working

Read other 6 answers
RELEVANCY SCORE 51.2

Hello all, first time poster, so be gentle with me.
My System restore is not working.
Im on AOL and Windows xp.

I go to System restore,
click on a restore date,
then, when i get to the page that says Confirm restore point selection; i click "next"
and nothing happens.

Im useing System restore to reconnect to "dailbb".
I loose my "dailbb" connection about every seven to ten days, and as my System restore is now not working, i have to phone AOL and thay talk me through reconnecting. But im getting a bit sick of phoneing.

Anyone else having trouble with looseing "dailbb"

I thank you.

Derek

A:System Restore Not Working

Hi shadowtaker9, and welcome to BleepingComputer.System Restore will only restore system files, and some minor program files.What it will restore, and what it won't. * Restored o Registry (note: some current values will persist) o Profiles (local only?roaming user profiles not impacted by restore) o COM+ DB o WFP.dll cache o WMI DB o IIS Metabase o Files with extensions listed in the Monitored File Extensions list * Not Restored o DRM settings o SAM hives (does not restore passwords) o WPA settings (Windows authentication information is not restored) o Contents of the My Documents folder(s) o Specific directories/files listed in the Monitored File Extensions list o Any file with an extension not listed in the Monitored File Extensions list o Items listed in both Filesnottobackup and KeysnottoRestore (hklm->system->controlset001->control->backuprestore->filesnottobackup and keysnottorestore) o User-created data stored in the user profile o Contents of redirected foldershttp://bertk.mvps.org/html/tips.html

Read other 2 answers
RELEVANCY SCORE 51.2

I am trying to use the system restore function on windows XP, but every time i select a restore point and the system reboots, it says that the restoration was incomplete and "no changes have been made." I have tried multiple restore points. Microsoft.com suggested that i verify that the task manager, WMI, and system restore services were running, and they are. I also tried disabling my antivirus program, but the same thing happens. I am out of ideas. Any suggestions would be wonderful.
 

A:System Restore not working

Read other 11 answers
RELEVANCY SCORE 51.2

I recently ran a Registry cleaner and being a Newbie have done something to my registry.

I cannot systems restore it just says

%systemroot%registration
Destination: ComPlus Staging

Is there anyway to rectify this.

Liz

Windows 7 Home Premium

64 bit

A:System Restore not Working

Why are you doing a System Restore?

System Recovery Options

Read other 9 answers
RELEVANCY SCORE 51.2

I am unable to restore my computer (windows XP) to a restore point. Tried last 4 and none of them will restore.
 

Read other answers
RELEVANCY SCORE 51.2

Installed Norton Internet Security 2005 and now, whenever I try and do a system restore it says "System restore encountered a problem and has to close".

It does this all the time, even in safe mode. Symantec has mentioned that I should turn off NIS2005 and try system restore. If it then works it is a Microsoft issue.

I have been onto the Microsoft websites and they do not mention how to repair or reinstall system restore , does anyone out there know?
 

A:system restore not working?

First have you gone through the troubleshooting drill here:

http://support.microsoft.com/default.aspx?scid=KB;en-us;q302796

In particular determine you have enough available hard drive space and perhaps purge the System Restore archive and try manually creating a check point and restoring it?

What Windows version/Service Pack update do you have?

While there is an sr.inf "setup" file for System Restore, you may be prompted for locations to reinstall files from, and I'm not sure if you can reinstall it properly from the Service Pack files.
 

Read other 3 answers
RELEVANCY SCORE 51.2

Hi,
I have been trying to restore my computer to a couple days previously but it just won't work. I've been trying to do this to restore an art program I use daily that I somehow managed to reset my settings on and I can't fix it. I keep getting the error message 0x80070571 and I ran chkdsk/r last night then ran system restore but it still did not work. I disabled Windows Defender temporarily and it still did not work. I even ran it in Safe Mode and it still didn't work. I scanned for viruses and there's none so I'm pretty sure it's not that. I also went through services.msc and started Volume Shadow Copy service because it wasn't started then restored again but it did not work. Can anyone help? I'm running sfc/scannow at the moment.
My computer is a HP 15-f039wm Notebook PC running Windows 8.1 OS. I've had it for less than a year I believe, with no problems.

A:System Restore Not Working

Hi tomatetoro Is this the exact error message you are getting when trying to create a restore point, or trying to restore to a previous one?Error 0x80070571: The disc structure is corrupted and unreadable

Read other 44 answers
RELEVANCY SCORE 51.2

systems restores turned on, but when my pc restarts it says, it could not restore no changes have been made at this time. im on windows xp professional media center edition with service pack 3.

A:system restore not working

??? are u doing a restore from an earlier restore point or is this a message that pops up when XP boots up? Did u uninstall a program prior to this message popup?

Read other 4 answers
RELEVANCY SCORE 51.2

windows xp sp3

Hi, My system restore is refusing to work what ever way i try to get into it all i get is the hour glass coming up for a couple of seconds and then nothing. has anyone any ideas how to make it work again.
ive tried going through system tools, directly through rstrui.exe, through dos, and safemode, and still nothing. I dont have any discs to go with this computer as its a few years old, second hand and came with XP preinstalled. so any ideas would be welcome as this computer the children use and system restore has been a great help many times before!!!. THANKS..

A:System Restore's Not Working

If you bought it and have a receipt AND a CoA tag number Microsoft will normally acknowledge your ownership and you can get a replacement XP disc for a fee.

What CAN you boot to? Safe Mode, normal ??

Read other 3 answers
RELEVANCY SCORE 51.2

I receive the message "Cannot restore to an earlier restore point, no changes have been made to your computer."

I checked the Forums and found a similar case where the recommended action was to try Tip #1795 on WorldStart.com.com. I tried this and it did not work.

Can anyone suggest what I should try next?
 

A:System Restore not working

Read other 16 answers
RELEVANCY SCORE 51.2

I'm running Windows XP, but when I try to restore my system to a previous date it goes throught the motions, restarts fine and then tells me that it cannot restore to that date and that no changes have been made. I've tried various dates and get the same answer.

Any thoughts/help very much appreciated!

Thanks.
 

A:System Restore not working

Read other 7 answers
RELEVANCY SCORE 51.2

i opened system restore.error occured.no restore points.please help.see attached file

A:system restore not working

Welcome to Seven Forums.

From a search on Google.





Quote:
To resolve this issue, perform the following steps:
1. Click Start, type regedit in the Start Search box, and hit Enter.
2. Locate and then click the following registry key:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/swprv/Parameters
Note: If the Parameters registry key is missing, perform the following steps: Right-click the swprv registry key, select New, select Key, type Parameters and hit Enter.
3. Once the Parameters registry key is selected, verify that the ServiceDll registry value has the following value:
%Systemroot%System32swprv.dll
Note: If the ServiceDll registry value is missing, perform the following steps:Right-click the Parameters registry key, select New, and then select Expandable String Value.
For the value name, type ServiceDll and hit Enter.
Double-click the ServiceDll registry value.
In the Value Data box, type %Systemroot%System32swprv.dll, and then click OK.4. Perform a backup operation to verify that the issue is resolved.

Solve Error 0?81000203 | System Restore Or Back Up Error In Windows 7 And Windows Server 2008


What mine looks like

Read other 2 answers
RELEVANCY SCORE 51.2

Hello. I am trying to use system restore, but it does not work. I select a previous system restore point to restore to everything works fine until the computer reboots. Then its says system reboot did not work, nothing was changed and try another restore point.
 

A:[B]System Restore Not Working[/B]

Try this:

You will need to be able to view hidden files, so go to Start>> Control Panel>> Folder Options>> View tab.
Under Advanced settings, place a check mark in: "Show hidden files and folders".
Then uncheck: "Hide extensions for known file types".
Click Apply, then OK to exit.
Open Windows Explorer, then go to Windows>> inf folder.
Open the inf folder and find a file named:
sr.inf
Right click this file and select "Install" from the resulting menu.
Note: This procedure will delete all restore points from your old installation and recreate a fresh installation of System Restore.
When finished with this reboot the system and try going back into system restore and see if it works.
 

Read other 3 answers
RELEVANCY SCORE 51.2

Hello there. i'm having some trouble with my computer. i came home from a two week trip to find my computer had the "antivirus 2009" virus on it and i think it may have had a couple others as well. what was happening at first was my computer would just restart itself. then when i typed something in google the links would redirect me to an ad search site or some random site. well eventually i fixed the redirect problem (can't remember how now). so i went around many different forums and eventually read about hijackthis. so when i tried to install hijackthis it wouldn't work...i would click install>run and nothing would happen. same with spybot search and destroy, i would install but when it would try to download something it would just stop working. When i tried System restore it said "windows cannot restore to this point please choose another restore point" none of them would work. i tried creating a new system restore point but it said "cannot create a system restore point please restart your computer and try again". thats when i read something about UnHackMe. i installed and ran that program which enabled me to install hijackthis. now i have hijackthis installed but dont know anything about registry keys. so if anyone can help i would appreciate it very much.

A:System restore not working

Please read:http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/Then post your HJT log in the proper forum here:http://www.bleepingcomputer.com/forums/f/22/virus-trojan-spyware-and-malware-removal-logs/

Read other 3 answers
RELEVANCY SCORE 51.2

My System Restore will not create any restore points. Every attempt is met with the error "System Restore was unable to create a restore point. Please restart the computer and try again". The service is running, and I have turned Restore off, rebooted, then turned it back on to no avail. I cannot find any warnings in Event Viewer. I have even re-installed System Restore and run SFC to no avail. I have run different rootkit and anti-virus programs, but cannot find any of either. Does anyone else have any ideas?

A:System Restore Not Working

I had similar trouble and my appeal for help resulted in LOTS of advice but nothing worked for me. (A search would find my original posting).

What did work for me was my installing the software Super AntiSpyware Free Edition and discovering by chance that there is a Repair section and listed is a repair of Windows System Restore.

I clicked on this and miraculously (!) my problem was solved.

I now have Super AntiSpyware Professional installed but my problem was solved with the Free Edition. Maybe worth a try?

Read other 9 answers
RELEVANCY SCORE 51.2

I have windows xp media centre service pack 2 ( use Norton Internet Security) and can't get system restore to work. I've tried many restore points and get this message:

Restoration Incomplete
Your computer cannot be restored to ____. Pick another restore point and try again.

Then a window pops up and reads:

Symantec Service Framework has encountered a problem and needs to close.

Please tell microsoft about this problem. Send error report.

Then another window pops up from the task bar which reads:

Norton
Your antivirus program has been turned off and computer not protected. When I check my Norton antivirus program its says I'm connected and protected.

Can you help with system restore?

A:System Restore Not Working

This is a problem with Norton I'm afraid. Which version of Norton are you using?

Read other 9 answers
RELEVANCY SCORE 51.2

Hey everyone I am having a very difficult and annoying problem to fix. First it started out I wasn't able to do a system restore to an earlier time running windows regularly but in safe mode. Now I can not do a system restore in safe mode or running in normal mode. When I try to run the restore to an earlier point it will restart say system restore is initializing, say it is complete and boot up and then say System restore did not complete successfully and none of my files were changed. I have tried everything from disabling AVG antivirus to running in safe mode and researching the problem in debth, but I can not figure out what to do. This happens on every single restore point. I went into the event viewer and found the following errors:
1. Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x80004002, No such interface supported. (Event ID 8193)
2. Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The error returned from CoCreateInstance on class with CLSID {4e14fba2-2e22-11d1-9964-00c04fbbb345} and Name CEventSystem is [0x80004002, No such interface supported]. (Event ID 22)
3.
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x80004002, No such interface supported.
Operation:
PrepareForBackup event
Executing Asynch... Read more

A:System Restore Not Working

to get you started while we wait for others for better recommendation.

here's an article about the shadow copy provider had an unexpected error.

The shadow copy provider had an unexpected error | Online IT Support

Read other 9 answers
RELEVANCY SCORE 51.2

Hello,

I'm new to the forum and recently some of my startup items have stopped coming up (Skype, Spotify) when I installed Bluestacks.

I then decided to uninstall the software but the problem was still happening so I did a system restore from when I installed Bluestacks but this restore failed.

Here is my Hijackthis Log:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 16:54:00, on 19/12/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\TeamViewer\Version7\TeamViewer.exe
C:\Windows\PixArt\Pac7302\Monitor.exe
C:\Program Files\Elaborate Bytes\VirtualCloneDrive\VCDDaemon.exe
C:\Program Files\CyberLink\YouCam\YCMMirage.exe
C:\Program Files\CyberLink\YouCam\YouCamTray.exe
C:\Program Files\AVAST Software\Avast\AvastUI.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\Epson Software\Event Manager\EEventManager.exe
C:\Program Files\Real\RealPlayer\Update\realsched.exe
C:\Program Files\MultiMi\MultiMi.exe
C:\Program Files\Logitech\LWS\Webcam Software\LWS.exe
C:\Program Files\... Read more

A:System Restore Not Working

To Add,

I've Also Realized That On The Bottom Taskbar (Windows 7) I Can't Move The Any Icons To The Very Left Unless The Program's Open If That Helps.

Read other 4 answers
RELEVANCY SCORE 51.2

Windows XP Pro SP3.  Although a number of problems with this PC have been corrected with the help of members on this site, there still remain a few. One of the present problems is that System Restore does not work, nor will regedit export its files. I'm using erunt so the latter is no hardship.
I ran rkill and FSS - the logs are below.
One of the members here stated that the System Restore problem was solved by by re-installing sr.inf from the c:\windows\inf folder. I tried this, but it led me to a BSOD and a memory dump. I booted back with "last known good configuration" and it's back now to where it was.
I'd be grateful for any help in correcting the remaining errors.
 

A:System Restore not working

Have you tried running the sfc /scannow command...to replace missing/damaged system files?
 
Louis

Read other 6 answers
RELEVANCY SCORE 51.2

Hi there hope you can help.
For some reason my System restore does not go back any further than the month it is in. I know it crerates automatic points but for some reason on my desktop pc it will not. My Laptop running XP is fine as are my friends. Just wondered what I can do to solve this and would appreciate any advice.
Richard

A:System Restore not working

hi
try a virus scan first
use either housecall or panda
then under system properties in your control panel, click on system restore and move the slide all the way to the right to enable more restore points. in the future.
regards

Read other 4 answers
RELEVANCY SCORE 51.2

Tried to do a system restore. But no matter which restore point I try, I keep getting " not possible to restore to this point". I thought that the restore points in the callender in bold was the date there was supposed to be a restore point...?? confused

Any help please

A:System restore ..not working

The restore points could have become corrupt due to malware, or just an accident. You can try to purge (delete) all but your oldest restore points. You should only do this if you know for a fact that everything else about your computer is working fine and you are free from all malware. Now you should Set a New Restore Point The easiest and safest way to do this is:Go to Start > Programs > Accessories > System Tools and click "System Restore".Choose the radio button marked "Create a Restore Point" on the first screen then click "Next". Give the R.P. a name then click "Create". The new point will be stamped with the current date and time. Keep a log of this so you can find it easily should you need to use System Restore.Then go to Start > Run and type: CleanmgrClick "OK".Click the "More Options" Tab.Click "Clean Up" in the System Restore section to remove all previous restore points except the newly created one.

Read other 4 answers
RELEVANCY SCORE 51.2

I was at an internet coffee shop today. Unsecured network.

Using my laptop at home this evening, Outlook has opened at least twice on its own. Just in case, I tried a system restore to a few days ago, but apparently system restore function is disabled.

Thoughts? Thanks!
 

Read other answers
RELEVANCY SCORE 51.2

Hi I have a windows 8.1 dell laptop ,for some reason system restore is not creating points manually or automatically, when I try to make a restore point manually the working bar just keeps moving at the sane time though I noticed in the device manger a generic volume shadow copy entry will show up with a yellow mark beside it ,I have tried maybe 10-15 times to uninstall this and try system restore again ,but this keeps repeating itself,
I have also went into safe mode but system restore points can't be made under safe mode, I did the repository thing where I rename that folder to old and reset repository in safe mode ,same result any ideas pls Thks

A:System restore not working help ...

Make sure System Restore is enabled

In the elevated command prompt run sfc /scannow.

Also run chkdsk /f /r

Read other 19 answers
RELEVANCY SCORE 51.2

Hi all
 
I need to restore my xp pro to an earlier date due to removing a programme in error, however when i try to 
restore, it goes through the process then i get the message unable to restore to this date.
I have tried numerous dates and its the same.
Tried it it safe mode as well and still the same.
Tried to undo the last restore event and it says 'Undo Incomplete' 'SR was unable to reverse the restoration'
Done a scan with Avast and Malwarebytes and all show clean.
All my update have been done an all is up too date.
I did not try switching off SR off, as i know if i do it may remove all restore dates and then i have lost my programme
anyway.
My settings show it at 12% which is maximum (this is not where i set it originally which was 5%) so not sure how that happened.
The programme i removed in error was 'LG cyberlink power dvd' and it looks like it removed a decoder from my WMP and now i'm not able to view DVD,s in WMP that's why i need to restore (also i need SR to work).
I downloaded cyberlink from the website only to find it was an upgrade and not the player so unable to install that as its saying it cannot find powerdvd on my system
 
Any help will be very much appreciated
 
Kind Regards
Rozzer

A:System Restore not working

You could try this link. Just be aware that CNET tends to bundle other software with its downloads so choose 'Custom' or 'Manual' install. Whatever you do, don't use 'Easy', 'Quick' or 'Automatic' options and look at every screen carefully before you click 'Next' !
 
http://download.cnet.com/CyberLink-PowerDVD/3000-13632_4-10352449.html
 
Alternatively you could try the freeware VLC player, which you can get from here -
 
http://www.videolan.org/vlc/index.en_GB.html
 
I use the VLC player as my default for all video and music and I have yet to find a format it can't play.
 
Once you start a System Restore it is irreversible, you get a warning to that effect before you actually click on the 'Restore now' button, which is why you cannot undo it.
 
Chris Cosgrove

Read other 6 answers
RELEVANCY SCORE 51.2

I cannot use system restore i get message .There was a unexpected error in the property page,The volume shadow copy service used by system restore is not working event log 0x81000202
When I try to start volume shadow copy service in services i get message.windows could not start the volume shadow service on local computer,cannot find the path specified error 3.Anybody please help

A:System restore not working

WIN key | type CMD.EXE | DO NOT HIT ENTER KEY |
in the list shown above where you typed cmd.exe, Right-Click on CMD.EXE |
click on "Run as administator" |
type SFC /SCANNOW | ENTER key |
when sfc finishes, then type EXIT |
shutdown your computer
Turn on your computer

Problem gone?

Read other 7 answers
RELEVANCY SCORE 51.2

I tried restoring my system 1 month back it gave an error.After few days i again tried nut same error.I hav uploaded d screenshot of the error pls help me.i tried stopping my antivirus program n restoring but d same error.This is happening since last 1 month pls help me..

A:System restore not working

Try doing a disk check.
Disk Check

Read other 9 answers
RELEVANCY SCORE 51.2

Hi all ,
I clicked on system restore and got the message

" system restore is unable to protect your computer . Please restart and try again"

I rebooted several times and got the same message .
I then accessed system restore with view of switching it off and on again . i checked the on / off box then clicked on apply changes and got the following message

"System restore encountered a problem trying to enable/disable one or more drives. Please restart your machine and try again later"

I then thought that if i slide the disc space bar down to zero it may clear out system restore but i got the same message as when i tried turning it off .
i went into safe mode and searched for the wininit.ini file with the view of renaming it but this isn't the problem.

About My computer (security)
Spyware Doctor
SpywareBlaster
AVG 7.5
AVG antiRootkit
Ad-Aware SE personal
Spybot
Spywareguard
Ashampoo Anti Spyware
CWshredder
Winpatrol
I keep all these up to date and run them all (not at the same time ) twice weekly , in addition i use Trend Micro's online scanner once a week .
All are reporting no problems .

My Computer (recent history)
I had trouble with secretmaker blocking a download (from a trusted source) , i tried the "quick bypass" keys but it still blocked the download, i then closed the secretmaker programme down , restarted my browser ,but still somehow it blocked the download .I then uninstalled secretmaker as to be honest i never really l... Read more

A:System restore not working

Read other 10 answers
RELEVANCY SCORE 51.2

I had to replace a dead hard drive. I am trying to use the factory restore discs but it says that they can only be used with a Pavilion and if you are trying to use them with a Pavillon desktop contact HP support for assistance. What do I need to do to get my OS back online? Thanks in advance.

Read other answers
RELEVANCY SCORE 51.2

I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. I actually used System restore about 4 times in one afternoon and now it won't let me restore any further back than the 28th. I thought if I could go back far enough the drivers I had downloaded would be dormant and save me trouble. I am a complete novice so if you can help me with this problem please post it in baby language, thanks in advance.
 

A:System Restore not working

Read other 6 answers
RELEVANCY SCORE 51.2

window says system restore unsuccessful due to an undisclosed error. windows vista home premium . same thing in safe mode. please help
 

A:System restore not working

Seldom does work, really.
You might try a full defrag and try again, but usually when System Restore doesn't work there is no good fix.
Any chance you have an infestation?
 

Read other 7 answers
RELEVANCY SCORE 51.2

Came with Win 8.1 64bit

I have tried 2 times to do a system restore with 2 different points.
Once started system gets to screen saying system restore initializing, and it just stays at that point with circle spinning. I have to hold down power button to turn off and than restart back to desktop saying restore failed.
What could possibly be wrong?

A:system restore not working on Win 8.1

Hello, Johnf. Sorry to read your having problems.

I just restored mine yesterday. It does take quite a long time. I do remember the busy circle, but I can't for the life of me remember if it changed to a different screen after a while. that sequence took approximately 10 to 15 minutes. It eventually stated it was restarting, the screen went dark, and I could see it working again for approximately 5 minutes. It then booted again and worked again for another 5 minutes before I got a lock screen, then after hitting a key, a sign-in screen.

How long did yours run with the busy circle before you hard reset it? Also, I think it not to be a good idea to hard reset while it's in that mode, but obviously it rebooted to do it again.

Read other 11 answers
RELEVANCY SCORE 51.2

I've not had any 'auto' restore points in the 3 months I've had PC. Guess I was supposed to configure it at time of setting up machine. Anyway . . .got into it & found what looks like a folder icon:PQSERVICE -- Protection:Off. Am I supposed to turn it on too?

A:System Restore not working

As far as I'm aware the PQService is your computer's hidden recovery partition so my thinking would be that if its off you can't use it to restore to factory settings.

I think you'll get more information via your manufacturer's support site or your computer manual.

Read other 6 answers
RELEVANCY SCORE 51.2

Hi, AllI have just (Flawlessly) Upgraded my Desktop PC from Vista, to W7, Immediately after installation completed I Checked for and Installed the Latest Updates, I then Installed NIS 2010, once again without a hitch, Installed Latest Updates. etc. apps. Drivers, etc. etc.Everything went very smoothly, no problems with Upgrade Hanging at 62% or any of the other hitches that have been reported, and I was expecting. However I am left with one Major Problem, = I decided to test System Restore. I manually set a Restore Point (before placing a File/Folder 0n desktop) and then did a System Restore to this aforementioned restore point, the resulting Dialogue Box was ="System Restore did not complete successfully, Your computer's files and settings were not changed.Details; System Restore could not access a file. This is probably because an anti-virus program is running on the computer . Temporally disable your antivirus program and retry System Restore.An unspecified error occurred during System Restore, (0x80070005)"I have Tried Turning Off all the the apps that are turned On, in NIS 2010 including " Product Tamper Protection" I have done 5 tests to date, varying from all Protection off, to selected portions turned Off, Inc " Product Tamper Protection" only Off. All have Failed to Restore, and produce the above "Dialogue Box"Any suggestions Gratefully Received, Thanks, Dave.

A:System Restore not Working

what AV are you running? did you have that AV installed before? Maybe you should try uninstalling it, and then reinstalling it. An OS upgrade is a big upgrade.

Read other 6 answers