Over 1 million tech questions and answers.

Network Problem

Q: Network Problem

I have got an anoying problem with my network.
in the bottom in the toolbar there is an exclamtion mark, saying limited or no activity, (this has only come up recently.)
i look in status of the connection and i have noticed that my ip adress begins with 169, i know that this is not good. i have tried renewing the ip address, but no luck it says could not be completed.

i have also tried renewing the ip address in command prompt but comes up with . ' An error occurred while renewing interface Local area connection 3 : unable to contact your dhcp server. request has time out.'

this problem is very anoying as my network has been working well for a while, now all of a sudden this has occured. i now cant share my internet, or files and printer.

this error only shows up on the host computer.

RELEVANCY SCORE 200
Preferred Solution: Network Problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Network Problem

You post does not provide much info as to how you are connected and a couple of details about the hardware you are running, O/S, etc.
Did you run the network wizard on each machine? Remember it will change your Workgroup name back to default.
Have you updated Firewall ?
Have you checked connection settings at each machine ?Did you try the Ping command?

Read other 10 answers
RELEVANCY SCORE 34.4

hi all

sony vaio pc desktop pcvrs620 g, dell A940 all in one printer (wired to sony desktop) and a toshiba satellite laptop connnected through a wireless linksys router to the network...
all xp sp2

here's the trouble. we want to be able to share this printer, but right now cannot make the laptop print on the wired printer. of course it will print if i connect the usb cable, but i want to be ablet to print wirelessly.

have done "share this printer" on the wired pc
when i try to add the drivers /install the printer on the laptop it wants me to connect the laptop to the printer...i am not sure that i want to establish this connection since my ultimate goal is wireless printing...

ok? thanks!!

sorry, edited, i am posting this question in the more appropriate "networking" forum...
 

Read other answers
RELEVANCY SCORE 34.4

Hi peeps, here's a seemingly unsolvable problem I have:

I want to network my two PCs (An Acer Vista Laptop and my old HP XP Desktop) so that I can play network games (Operation Flashpoint).

So I connect them both wirelessly to the router (a cheap SWEEX one). Now when Iook on my Vista Laptop's Network place I can see the Laptop I'm using the router (and can access it's page and everything) but I can't see my XP desktop from here. And when I go into the Desktop's network places I can't see the router or either of the computers I'm using.

And I assume that this network problem is why I can't see a server in my game.

Now I understand that file and printer sharing is turned, the firewall is definately turned off and I think the appropriate services are turned on (well to make sure I turned every single service on ) There must be some more complex reason why my XP hates to network!

Although I am by no means a noob to general computing I am reasonably new to networking. Can you clever lot help me?
 

A:Wireless Network problem: My XP won't show the router or other PC in Network Places

I am surprised that the old XP desktiop has wireless functionality. Did you add wireless to it, recently? If so, is it shown as operating correctly in Device Manager?
 

Read other 12 answers
RELEVANCY SCORE 34.4

So i'm having an issue connecting my desktop to my home network for file sharing. My Desktop is connected to the internet like so: Desktop ->(Ethernet cable)-> Uverse 2wire router -> Internet.

I have no issues with my internet connection, and in fact I am posting this from my desktop now. Windows Network Diagnostics finds no issues when I run the trouble shooter. and when I try to connect to a home group it refers me to the network issue.

This issue has plagued me for about 6 months now. I have talked to Uverse tech support, and many of my friends who are into computers and have gotten no answers. Computer is running windows 7 SP1 and again the router is the Uverse 2wire router

How can I make my desktop available for network sharing?

Also here is a screenshot of the network map according to this computer

A:Network Sharing Problem. Connecting Desktop to home network

Have you set up a home network? What is the workgroup name? Are there any passwords of any kind? Have you set your shared settings on each PC in the workgroup?

Read other 3 answers
RELEVANCY SCORE 34.4

The problem ocurred because the network did not assign a network adress to the computer
This is the message that I get everytime the I conect my d link wbr 2310 rangebooster g router

and when I click in properties
it says limited or no connectivity

This is my 1s time connecting this router to this computer
I have connected with this modem

I dont I know if this can be connect it with this

Thank You
 

A:The problem ocurred because the network did not assign a network adress to the comput

Read other 9 answers
RELEVANCY SCORE 34

HI,

I have installed server 2003 on a small network and created a domain that is the same as the public domain name (ie the companies website).

This is now causing a problem because when i type in the public address (for example www.company.com) it is trying to resolve it locally - because the local domain name is also company.com.

Does anyone know if there is a way to get round this problem?

Many thanks in advance

Dave
 

A:problem with the local network having the same domain name as the public network

add 'local.' to the internal domain or change it altogether.

Your public domain should not have any connection into your private infrastructure,
but you may have references from private->public; not very common.
 

Read other 6 answers
RELEVANCY SCORE 34

Hello!
I added a printer to my network (hp c5180) via ethernet cable. But problem accords when I try to map a network location (card reader 5in1 or sth like that, is used to read SD, xD, ms cards used in cameras) from which I d like to copy images, files in explorer without extra software from HP. After I installed drivers for printer, it automatically map a network location but when I try to open it or connect to that location I get an error:

"Access code is invalid"
The network path is "\\192.168.1.9\Memory_card"
I copied this link in to my internet browser (in this case its g Chrome) and I was able to connect to the network location:

Its strange because all of XP based computers can easily connect, problem is only with windows 7 based computers.
Somewhere I found that this could be repaired with changing: (below)





Quote:

1. Open the Administrative Tools in the Control Panel
2. Open the Local Security Policy
3. Select the Security Option under Local Policies
4. Choose Send LM & NTLM responses in Network security: LAN


or in reg:





Quote:
In Windows 7, we can set the following Registry key ?HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contr ol\Lsa\LMCompatibilityLevel? to ?1?.


But this solutions dont work in my case.

Does somebody know hot to fix this and what is causing it??
Ty for reply

A:Problem with mapping network location - network printer

Do you have a lot of pictures on your memory card? Or is the memory card near its max limit?

Read other 2 answers
RELEVANCY SCORE 34

Hello, i am new here on the forum. Im looking for any gentle help i can get here from you guys who might be able to figure out my problem.
For some time ago (around 1 month) ive been having problems with my internet from time to time which include a really slow responding or sending into the internet. It is so that sometimes my ping goes up above 200ms and stays there for a quite some time (maybe an hour or more). I check my ping using cmd and typing "ping ping.sunet.se". I can also feel that the delay is huge when playing online games, so there is deffenitly something wrong with the sending and responding. Also when i check my connection in mb/s using some homepages that calculates it, like "bredbandskollen.se" (a swedish page). And here i see that the mb/s speed is prefectly fine (around 7mb/s recieving and 0.4-0.1mb/s sending). Not sure if the sending speed is accepting thou. And when my internet is busy, like when i am streaming something or things like that, my responding speed gets a bit better like 150ms, thou when my internet is doing fine and works as it should i usually stay around 20ms ^^ so something must be wrong.
Now i woundering what might cause my internet troubeling. Any thoughts would be great, thanks!
 

Read other answers
RELEVANCY SCORE 34

is there any solutions for this problem?
it's really bugging me
i already try to fix it by manage the device manager (network adapters)

A:Problem with wireless network adapter or acces network

Hello razuke, Welcome to SevenForums : Can we get a bit more information to assist you ? Please do this : System Info - See Your System Specs . After updating your profile pls do this to enable us to have information to help you out : Basic Requirements Before Posting your Networking Thread . Thank you , we will try out best to assist you in this issue.

Read other 1 answers
RELEVANCY SCORE 34

So im at a complete loss here....

I have a windows 7 pro x86 computer that out of the blue stopped connecting to its network drives. I tried a few things like flushing the dns, re-registering, new IP finally I decided to rejoin it to the domain, big mistake. The computer couldn't contact the domain controller even though all the info was correct. I ended up doing a restore to the week prior updated the NIC drivers and everything seemed to be working.

The following day it happened again I tried the same few fixes and the solution this time was to uninstall all the hidden devices under the network adapter, after a reboot I got into the drives just fine. Now everytime the user shuts his computer down he gets this same problem. My boss ran into the same problem on another machine the other day so Im hesitant to restore, I would prefer a fix in case this shows up again.

The computer can get online and use our email through outlook but network resources are all gone. The machine can also ping all of the servers but wont connect with \\xxx.xxx.xxx.xxx IP or \\servername\share even with credentials entered.

Ive looked all over with no success.

A:Very strange problem connecting to network drives / network.

Welcome to Seven Forums,

If it's now happening to another computer, I'd unplug the router and switch(es) for 20 to 30 seconds. Also, check on your computer's Security or Firewall programs installed, make sure that they are up to date and not blocking the ports and network resources. You may try disabling the program(s) temporarily for debugging purpose.

An update will be nice.

Read other 1 answers
RELEVANCY SCORE 34

I have a Linksys BEFSR81 router and a Linksys WAP54G connected to it. I recently installed a Linksys Network Storage Link NSLU2 to the network with a Maxtor One Touch HD. I have been able to map the new network drive to my computer that is connected to the router, but I'm unable to map the drive on my second computer that is connected to the network via the AP. However I can ping the Linksys NAS from my wireless computer.
 

A:Mapping Network Drive on Wireless Network Problem

like most NAS devices, the Linksys nslu2 has built in security administered through a web browser. You probably need to create a user acount for the wirelessly-attached computer, either by machine name, IP address, user id, or some combination of the above. You may also have to grant permission to the user or user group for the specific share you are trying to map. hope this helps.
 

Read other 3 answers
RELEVANCY SCORE 33.2

I got help to a BSOD problem in the crashes and bugs forum. Impressed with the help i received i was hoping to get help for a network issue ive had for a while.

I am using a cablet connection with my Zyxcel P2602 HWT modem. The modem/router is provided by my internet provider. It also supports a wireless connection.

When i start my computer both the connections is fine. After a while though the cabled connection is said to be unidentified. It works as a local connection, but has no internet access. When i run the diagnoses for the connection it again recognize the network and its working fine for a while until the same happens.

I tried upgrading the driver without luck. The version now says Atheros AR8121/AR88113/AR88114 PCI-E ethernet Controller (NDIS6.20
Driver date: 11.06.2009

If there is information needed ill be happy to provide.

A:Network problem - Unidentified cabled Network

Hello DonkrDjay, welcome to SF!

As a test, can you check what IP number your router gives you (through its DHCP server i hope) when it works well?
Then when it stops working... is it still the same or did you get a totally different IP for your PC?

Second, if posible, could you post snips of your router DHCP settings?

Read other 2 answers
RELEVANCY SCORE 32.4

Thanks for the forum.

First - Network problem prevented internet access. I used "Diagnose" and "Repair". Repair found something and "fixed" it. Internet accessed after that.

Even Log:
Code:

Problem signature
Problem Event Name: NetworkDiagnosticsFrameworkV2
Vendor: Microsoft
OwnerHC: WinInetHelperClass
OwnerHCVersion: 1.0
SessionStatus: 2
HRESULT: 8008F906
Repair: {30B6B189-CCE3-4b6f-877B-C1AE960CE1EF}
RootCauseHC: Winsock
RootCauseHCVersion: 1.0
RootCause: {D438FDF3-F143-430e-B187-E02B2E14B641}
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Files that help describe the problem
eventlog.etl

Second - Firefox (Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729) will load, but will not search for page. Page viewing area remains blank and page status says "Done". I uninstalled and reinstalled without deleting user settings. This did not repair Firefox.

Third - Outlook 2007 Trial Version (12.0.6504.5000) SP2 MSO
(12.0.6425.1000) - Will not login to server. Error message reads "Receiving reported error (0x80040900). The server name you entered cannot be found on the network. (it might be down temporarily) Verify that you are online and that the server name is correct.

There is no event log associated with the Outlook problem.

Event logged from same day, but I'm unaware of how this fits:

Code:
Problem signature
Problem Event Name: ... Read more

A:Network problem became Firefox & Outlook problem, then MS update became AVG problem

??? Highhunter, Is this a reply to my earlier post???

Read other 19 answers
RELEVANCY SCORE 32

I recently had a computer that crashed and had to be rebuilt. Now that it is back up and running, Im having problems with mapping network drives. Specifically, two maps that were previously working.

If I go to my network places, all of the shares are present from all computers. I can get into all of them, except for two, both on the same computer. (on a windows XP pro) (the rebuild is also windows xp pro)

\\computer1\apps is not accessible. you may not have permission to use this network resource. contact the administrator of this server to find out if you have access permissions. Access is Denied.

I checked the folders, both show access to everyone. I can access them from another computer. Simple file sharing is turned off on all computers. I can ping all computers, and vice versa. Netbios over TCP/IP is enabled on all computers.

any ideas?

let me know if you need more information, I can get whatever is needed.
 

A:Network Drive / Network problem

Read other 6 answers
RELEVANCY SCORE 31.6

I have an interesting problem that has been driving some pretty smart IT guys nuts. To perform my job I have to access a certain venders web pages that has security set up that I do not know all the details of. Anyway on the company PC using the company image that is a normal XP image and maintained by Comp U Com.

Any time I access this vender's web page it works fine until just after the log in screen. Once I put in my user name and password and click Ok IE just goes blank white and that's it. No error msg no nothing, its not locked up as the frame is still there and the world is turning but nothing else.

This happens on all the company PCs accessing this particular vender's web page as I went and checked. So I wanted to see if it the problem was in the PC or the network. I took the company PC home and was able to successfully log into that vender's web page from my cable modem at that house. Worked fine.

I have already added the vender web pages to the trusted zone and enabled all the active X and everything, deleted the cookies, tried some proxies etc. Every setting that can be done on the PC I have tried.

My question is what is the company network security system blocking that IE needs to work and how to resolve?

Thanks

A:IE blank page problem on company network but works fine off company network

Oh and to add this I loaded FireFox and from the company PC on the company network it logs in fine but FireFox will not display the page correctly and all the buttons do not work right so that is another issue.

I would like to get IE working as that is what these pages were written for

Read other 9 answers
RELEVANCY SCORE 31.6

For 2 years, My XP computer has had no problems picking up 10-20 wireless connections in my neighborhood,some i could connect to,some i could not because they were secured.

i decided to go straight , and purchase DSL.

i bought a new computer(vista) and got a westell 327 DSL modem,which is also a wireless router. The new computer is working fine, i called Verizon to set up the new computer's dsl wireless network,that worked out fine.

My old computer,the one i spoke about opening this thread, that computer immediately picked up the DSL signal from my new computer in the other room.. The signal was excellent and the name of the network WAS ON THE LIST of the dozen other wireless connections i could connect to. Problem is when i went to connect to my own DSL network, i got this error message:

"Limited or no connectivity
You might not be able to access the internet or some network resource. This problem occurred because the network did not assign a network address to the computer."

I typed in the correct password,the little icon in the corner of my computer said both computers were connected, and with an excellent signal strength. Reiterating: i could still connect and go online with the other avaiable networks running the computer,but not my own.
 

A:Solved: "This problem occurred because the network did not assign a network address"

Read other 6 answers
RELEVANCY SCORE 31.6

Hi,

For several days my wireless connection has been connecting and disconnecting. Today I tried connecting to wireless and cannot actively see any wireless networks available. My wireless switch is on and is showing a blue light and Network Adapters in Device Manager show no warnings however when I run diagnose in Network Sharing Centre it tells me that Network Adapter "Wireless Networks Connection" is not connected.

The Wireless Router is fine and another laptop and iPad seem to have no problems connecting to it please could you advise?

I am running Windows Vista on a Vaio VGN FE41S

Many thanks,

J. Smith
 

A:Network Adapter "Wireless Network Connection" Problem for VGN FE41S

would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
Make sure you also indicate on the reply which tests are for what condition.
please include the xirrus screen shots for both conditions - see how below.

Please post back here the make and exact model of the router and if you have a separate modem, the make and exact model of the modem.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /al... Read more

Read other 1 answers
RELEVANCY SCORE 30.8

Hi everyone

I need to see if anyone has a solution to my problem. I have a Dell Inspiron 1525 and my granddaughter has a Dell Inspiron i15-157B. I added her laptop to our wireless network (Linksys wireless-G broadband router model WRT54GS). Everything works fine as long as she's here in our home, but when she goes home and we try to connect our webcams through Yahoo Messenger, I can see and hear her just fine. She can see me but can't hear me. Why would it work here and not there? I'm wondering if it's something with our home network.

Her laptop at home is connected directly to the internet, but they will be setting up a wireless router also. We both use Vista.

Any help would be greatly appreciated.
 

A:Solved: Sound problem while on web cam - home network problem?

Read other 7 answers
RELEVANCY SCORE 30.8

Greetings folks,

This is my first post , so Hi to all.

I got a network/connection problem.I formatted my pc today because when i turned it on , it gave the windows screen and then it said that it can;t access the " SYSTEM " folder , so i formatted it since it's been a while since i've done that ( like a year and a half ).After that , I tried connecting to the internet by inserting the ip address numbers and the DNS ( I use cable connection ) , it didnt work , then i tried chanding the network card number , it worked , for like 30 minutes but then it stoped , it said " network cable is not plugged " or something like that , but then it plugged ( i dont know how ),but no internet connection ... so i went to check for the network cards and there was like 2 or 3 of them ( NIC i guess it was written ), i tried uninstalling them , but it didnt work , so i disabled them , but still , there was no internet connection. I tried ipconfig/all / renew /etc... but still , NO PROGRESS. So if you may PLEASE help me in this , cuz im supposed to give my final thesis at the university at the end of this month . Thanks in advance

Oh and also , stuff like Local Area Connection , 2 , 3 , 4 ,5 ,6 , 7 started appearing :S
 

A:Loca Area Connection Problem/Network Problem

Are you getting any 'link light' on the card you plug the cable into? Usually a little green light or Amber I think it is on Dell. If you are not I suggest trying a different cable from your modem to your PC.

Also, is your PC directly connected to the modem or into a router?

And when setting your IP address are you going to Start --> Control Panel --> Network Connections?
 

Read other 2 answers
RELEVANCY SCORE 30.8
A:Same problem from 4 years ago, never solved, home network problem

oh ya and I forgot to add, both computers have windows xp firewall disabled
 

Read other 2 answers
RELEVANCY SCORE 30.8

Hello Everyone,
I am new to this forum. I am hoping someone maybe able to help me diagnose and fix the problem with this problem. I have a problem with Acer Aspire One Network Adapter. The problem is that the netbook will connect to the internet and will have full bars for internet connectivity. Then a few minutes later it will just disconnect on it's own! I can usually reconnect by going on the Network & Sharing Center, then going into Diagnose problems, then clicking on Network Adapter, then after it resets, it will usually reconnect to the Internet, but lately it won't reconnect! I then have to restart the netbook. The netbook is running Windows 7 Starter, and it has Atheros AR5BXB63 Network Adapter. My friend who is a computer person searched online to confirm if the drivers were up to date, said that was not the problem. I would like any advise anyone can give me to see if this netbook can be fixed before I have to buy another! Please advise?
v/r
Jcrane2014
 

A:Help with problem with Acer Aspire One Network Adapter Problem

Read other 10 answers
RELEVANCY SCORE 30.4

Hey yall, first post here. I am having a small problem. I recently update to the Vista SP2. It seems like after this installation I am having problems with my network. I can not get my Itunes connected to the store, I can't get my Mcafee to update, and I could not get a program for my Blackberry to update. I have tried and tried all kinds of stuff and I am really not sure what to do. As I was running some tests on my command prompt I got the System Error 53 message. Maybe yall can point me in the right way rather then me just googling everything and getting tons of different ways. I thought I would include this if this will help. Thanks to all in advance!!

C:\Users\***** *****>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : **********-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.tn.comcast.net.

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet
Physical Address. . . . . . . . . : 00-1D-72-6C-B3-E1
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
Description... Read more

A:Ummm Network problem maybe? SP2 problem?? Not sure. Need your advice!

I am also not being able to connect to some RSS feeds and calender in my Outlook because of a connection issue.

Read other 17 answers
RELEVANCY SCORE 30.4

PCs are Win 7 Ultimate, All are joined to the Domain
Domain Controller, DNS, DHCP Server (on same instance) is Server 2012 standard
The network topology is like this: Router as Internet Gateway>Switch>Wired to Server and PC's, SIP phones, and Wireless Access Point all on same subnet. DNS and DHCP have been offloaded to Server Roles and switched off on the router.
All of the PCs have network cards that have joined the domain network at least some of the time since I set them up.
Some of them have always picked up the domain network and continue to this day.
Some of them intermittently pick up the domain network and other times join whatever other unmanaged network is available.
Some of them have stopped picking up the domain network altogether and will, no matter how many times their NICs are restarted, always join a non-domain (unmanaged) network.
When the NICs are not joining the domain, they are unable to ping hostnames of any devices on the network but nslookup of the hostnames usually works. The DC, DNS, DHCP server's IP can be pinged without issue, ipv4 or ipv6.
I am recording DNS Client Errors (ID 1014) on all of the PCs during the intervals when their NICs are identifying which network to join.

-On the PCs that are catching the domain network I am only getting a single error about the root domain, eg the domain is ad.domain.com and I am only getting errors about how the configured DNS servers cannot resolve domain.com (nothing with fully qualified
do... Read more

Read other answers
RELEVANCY SCORE 29.2

I cannot connect to Diablo 2. My internet is working just fine, and i run on cable. It says i should try to connect to my internet service provider to log on, and even though im using cable i gave it a try...still nothin. I shutdown my firewall for a second to see if it didnt like diablo for some reason...still nothing. I have run out of ideas...plz help.

I know that World of Warcraft and Warcraft 3 work just fine, both are made by the same company as Diablo 2. (the connection gets stuck at connecting to fastest server phase)
 

A:Connection problem, possible network problem?

What are you running for a firewall?
 

Read other 1 answers
RELEVANCY SCORE 29.2

ok i get my internet threw charter and got a webstar modem from them
i connect it to my router about 90% of the time but when i disconnect my router and hook internet str8 to my pc it will work i had to reboot my pc thou
should i have to do that in win. 7 also same issue with my router but when i rebooted it didnt pick it up my internet stayed disconnected for a good min. saying there was no conection should i just give it about 20 min. next time and see if it connects or is this a windows 7 problem or network
if its win7 or ntwork how to speed the recognize of internet up

A:network problem or is this a windows 7 problem

Try resetting your router and then check if it still causes the same issue.

Read other 8 answers
RELEVANCY SCORE 28.4

Hey I just got my laptop today and it had Windows 7.
All went well 'till I noticed it kept opening these network connections after I configured my internet settings...
Can someone help me fix this problem?

A:network problem

bump...

Read other 9 answers
RELEVANCY SCORE 28.4

Network Problem ... same ip in 23 pc

my problem ... 23 new pc and 1 sever..... swith d-link.... problem 23 pc is same ip 192.168.0.0....invalid ip, n i try set menual but is same problem ... can`t sharing files, n ... , network interface card sis900... computer "acer Aspire SA80 Series" with windows xp pro..... i hope u alll can help me plzzz...........
 

A:Network Problem ... same ip in 32 pc

I'm afraid you are beyond all help when it comes to making sense.. I understand if you are not so good at English, but you don't need that many language skills to get facts right. Think before you type maybe?

When you set the IP addresses of the computers manually, all the computers still get the IP of 168.192.0.0? Surely the address is something like 192.168.x.x. And I really doubt it was 0.0 in the end. You'd have to use some exotic (and non-standard) netmask to achieve that.

Start over again. Step by step. What exactly do you have? A bunch of PCs, a "server", and a hub? Well, you most certainly can't get on the internet with only that. What kind of internet connection do you have? What kind of a server is it? What other networking devices do you have?

What exactly have you done? How did you configure the "server", how did you configure the "PCs"? How did you connect all the devices?

When setting everything up, please do it with only one PC at first. There's no point in going through all 32 of them if it doesn't work.
 

Read other 10 answers
RELEVANCY SCORE 28.4

Hello all,
I have a NETGEAR router, and something is starting to annoy me, when I used to download anything off the internet, in my firefox downloads tab, i used to be getting speeds up-to 600kb's but now I'm struggling to get 15kb's. My mum turns the router off on a night, because she knows i'l be playing on it all night :L the only time i can get back to 600kb's is when my service provider network goes down, so the phone lines go off. Then i can only have the download speeds until the router is turned off, then it's gone off again.

Help please?
Thanks in advance. xx
 

A:Network Problem

Read other 7 answers
RELEVANCY SCORE 28.4

for may laptop when i connect to internet . after that i connect to PPTP server
. The PPTP connection is not appear to the screen .

(this is got problem)


but i use my desktop connect is ok .

(this is correct one)


may i know any setting in my laptop is disabled show cannot be show in screen
thank you

Read other answers
RELEVANCY SCORE 28.4

Hi, few days ago I reinstalled my Windows 7 on my personal computer, and i made a fail. I named the computer the same neme as i named my laptop. Now i have a problem. When i try to go to the network places i cant see the laptop from the computer and cannot see the computer from the laptop. Can the problem be that they have the same network name? How to solve that. Thx annyway

A:Network problem

You can't have two computers with the same name on the same network...

Click START right click on MY COMPUTER , click PROPERTIES

GO TO YOUR BOTTOM RIGHT, CLICK CHANGE SETTINGS FOR YOUR COMPUTER NAME

Read other 3 answers
RELEVANCY SCORE 28.4

In our office system there seems to be a problem. My system has some shared folders. I have IPMsg software for use within the company. At times what happens is IPMsg is not showing anyone in the list. Secondly, no one was able to access my shared folders. But my internet is working pretty well. If internet is not working then I might be sure that has something to do with the network settings,etc.

Also in others system when this happens, they could not access internet but use IPMsg.

So can anyone help. me out.

Details:

All the machines are running Win XP SP2.
IPMsg v 2.06 (Doesnt matter Coz shared folders are not working as well).

A:A network problem in Win XP

ok, simple questions first:

all on the same LAN?

domain or workgroup?

if workgroup, are all computers members of the same workgroup?

software firewall, do you have one? if you do, what is it? if you don't, is windows firewall on?

let's start there.

Read other 13 answers
RELEVANCY SCORE 28.4

My job requires me to have 100% uptime on my internet and my internet hasn't been stable.
I am very confused on this matter, my connection to skype does not drop when this connection confliction appears i can call and receive calls/messages via skype but i can not connect to other online clients & google chrome/firefox/IE will not load webpages while this connection has a confliction.
Do i need to enable/disable anything on my router or modem? I can post modem logs if needed and my router is the netgear n300 modem is motorola surfboard. My ISP isn't helping me at all, all they do is reset the modem every time i call and tell me to do the same thing but the problem still randomly occurs, mainly when i try to buffer a video from video hosting websites. It's very strange the video still buffers and my skype still works but nothing else will at this time! Thanks for any help!
 

A:Looking for help on a serious network problem!

what security suite do you have or ever had on the PC

lets see the following when its all working fine and then repeat all the tests when it fails

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this... Read more

Read other 1 answers
RELEVANCY SCORE 28.4

Hey guys. I have a problem with one of the computers on my network. It will connecet to the wireless and LAN connection, but the connection is only local, I can see the other computers on the network, but I cannot connect to the internet myself. Yet all of the other computers on the network works perfectly.
Weird thing is that it happened just suddenly.

I think I must've tried almost everything by now (well everything I had in my mind), resetting the router, turning off and on the network card, reparing the connection, updating the network driver and the list goes on..

It's a HP Pavillion dv9000 laptop, and the network card is Intel Pro Wireless.

Any thoughts on this?
Thanks
Best regards, Fred
 

A:Network problem

Did your list include the firewall?
 

Read other 8 answers
RELEVANCY SCORE 28.4

Hey all
Since i built my computer I have been having fight with other family members over the internet as our router broke and we have to plug right into the modem (only one can connect at a time). Today i purchased a 8 port 10-100mbps network switch (Buying a router is not possible at this time) I connected the modem to the switch, then my computer and then the home computer. When i connected on my computer, everything was fine (I have vista ultimate x64 sp2.) I then disconnected and connected the home computer (xp Pro sp3) Everything worked fine. Then I came back to mine and tried to connect and after a bit of waiting i got the message "Error 815" and that the server is not responding. When I do the opposite and connect my computer and then try connect the xp computer, I get the message "Error 676 the line is busy."
I can browse both the computers files through network as long as I have the other computers password.
Does anyone know a solution to my problem so that both computers can be online at the same time e.g. a shared internet connection from vista pc to xp pc or connect to the internet through the other computer and vice versa?
Any help would be greatly appreciated!
P.S Both computers have kaspersky internet security but i tried disabling them and it still didnt work

A:Network Problem

Generally a switch is used for a large wired network like a college or small/big business office. A switch only multiplies your router ports from the usual 4 ports to 8 or 10 like you've got, there are switches with a larger number of ports as well, 50 and 100's. The router is what splits the INTERNET connection with out the router the switch is no good. The price of the switch is almost the exact same as a router, $50 or less. See attachment, wireless router that you can also hardwire as well from Walmart.

Read other 5 answers
RELEVANCY SCORE 28.4

Hey,

I just recently installed win 8 everything was working fine previously on win 7
but recently I noticed that when I try to connect to my universities wireless (which requires for us to login through
a redirected page) network, the connection doesnt connect.

Although when I do it with an ethernet it automatically redirects me to that logon page and i'm able to use the
internet

I know that it worked before because as mentioned before it did work on win 7 just something is wrong on 8

Help pls???
 

A:win 8 network problem

Read other 12 answers
RELEVANCY SCORE 28.4

My network connection, by it self disconnects and reconnects from time to time, up to 30 times a day if not more.
Ive called my ISP multiple times they are not being able to help, my protection software (Eset Smart Security) is also indicating Arp Poisoning Attack alot, and long time ago other messages were being displayed as ICPM Flooding Attack, DNS Cache Poisoning not anymore though only Arp Poisoning nowdays, And "two identical IP Adresses found" message also..

Kind Regards
Gabe

A:Network Problem

Hi -Re: ICMP attack - This is happens because some address(websites) tried to connect with you many many times via TCP in short period of time, possibly with no good intentions, so eset considered it as a "flood".Please read This Topic from Wilders forum for more information (also ESET related) -Thank You -

Read other 2 answers
RELEVANCY SCORE 28.4

HI I have a network with 4 computers 2 on xp and 2 on 2k
I have connected them with a router with one of the 2k being connected via usb and all other connected by the network cable.
The problem is that i can access the internet on all four and from the 2k machines i can access all machines via network places yet on the xp machines i can only see the machine i am on i have disabled all firewalls i have tried everythin
p.s. unfortunatley i am on AOL so i dont know if tht means anythin
 

A:Network problem with xp and 2k

How about calling your machines, say, XP1, XP2, 2K1 and 2K2 for this thread? From one of the XP machines, which of the others can you ping by IP address? By computer name?

What router has a USB connection?
 

Read other 2 answers
RELEVANCY SCORE 28.4

In a lan Network some system shareing files and printers but some systems not, i can connect them with Remot desktop but not use there shared files and printers, all system using XP os and workgroup domain.
please help!

A:Network Problem

Hi saysl. Welcome to TSF!!

I suggest you post this over at the Network group and let them help you out! Here is the link: Networking Forum

Good day!

Read other 2 answers
RELEVANCY SCORE 28.4

I just began experiencing this problem with svchost network service. Dell Dimension 4400 XP / SP3 Using IE8 - One session open.Both XP & IE8 are current with updates. Have not downloaded / installed new APPS in over a week.Internet response slows to a crawl. Task MGR shows a second 'svchost network service' running at 99%.Ending that process, things return to normal, but sometimes that process starts up again.I ended the process about 1 hr ago, and it did not return this time. What causes this and what if anything do I do to stop it ?

A:Network Problem

You might want to investigate that process.

How to determine what services are running under a SVCHOST.EXE process - http://www.bleepingcomputer.com/tutorials/list-services-running-under-svchost.exe-process/

Process Explorer Mini-guide and Screenshots - http://www.bleepingcomputer.com/forums/topic354690.html

Process Explorer - http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx

Louis

Read other 6 answers
RELEVANCY SCORE 28.4

Dear Madam/ Sir,

i can not able to go any of the net work sites with out refreshing after refreshing its works well.

while go through the detection, the result was one ore more internet protocol are missing and i could n`t resolve the problem

the same networking system is working perfectly with my other PC having windows 7 OS

pl. get me the best solution to solve the problem.

Read other answers
RELEVANCY SCORE 28.4

I'm having some problems setting up my first home network. I have a laptop and desktop both running Windows 98. The desktop has a Realtek card, and the laptop an Intel card. I wish to connect between the two with no hub and am using a 5e cable. Unfortunately I have no idea what network configuration I should be using (I'm new at this kind of thing, so no acronyms or ob scure references, please!)

Can anyone help?
 

A:First network problem

Read other 13 answers
RELEVANCY SCORE 28.4
RELEVANCY SCORE 28.4

1. I have several machines in the office running XP (5 in total), and all of them are in a network, and each computer have a folder where every computer in the network can read and write files.

2. I have a file in the "shared folder" of one of the computers that all the others can access and copy normally, but when i plug-in my noteboo (tha is also running XP), it can access the folder but when i try to copy the file it says i don?t have authorization to copy that file...

3. I created a "shared folder" in my notebook and i copied the files using the computer where it is situated and acessing the folder of the notebook, but i would wish to know what is wrong with my XP in the notebook that it can see and access the "shared folders" of the network, but can?t copy anything...

thanks

A:XP network problem

http://support.microsoft.com/?id=308421

Read other 1 answers
RELEVANCY SCORE 28.4

I just went on vacation where I did not have wifi. I came back and now whenever I try to get on the internet and it says limited access. I downloaded COMODO firewall before that but I had no problem then. The other computers on the network have no problem. Computer info below:

Windows:Windows 7
Router: Netgear
Type: Acer
Please help
 

A:Network problem

clear the wireless network profiles and try connecting, it will work.

This is the way to do it:

1) Go to Start and click on Control Panel.

2) Proceed to click View network status and tasks in Control Panel window.

3) Network and Sharing Center window will appear, proceed to click Manage wireless networks on left panel.

4) Manage Wireless Networks window will appear, and here you can see all available wireless network connection profiles. Select the profile you are trying to connect now or that you don’t use anymore, click on Remove to delete the selected profile. That's it!

5) Search for the wireless signals again and try connecting to it.

Note:
Before removing the wireless profile, make sure you have password/Network Key for the wireless connection incase if your wireless secured.
 

Read other 2 answers
RELEVANCY SCORE 28.4

ok both computers are running xp, desktop and laptop, ive set up both to be in same work group and firewalls are off, but however i cant seem to browse files etc. the other computer doesnt display in the network computers part, and if it does i get this error saying, network path not found when trying to use it. i read some where that im mixing some protcols, NetBEU and IPx/SPx Compatible Protocol but i dont know how to install these as they are not on the list of possible installs please help me
 

A:network problem

Read other 13 answers
RELEVANCY SCORE 28.4

Hello!

I've got the same problem on several computers. I've installed the SP2 and the system worked very fine.
But when I'm having lots of network traffic, my computer reboots again. I got an error message: 0x1000007e

I couldn't find helpful stuff to get my problem fixed. I also contacted my network card vendor (Marvell, I've got a Yukon Gigabit Ethernet onboard), they gave me the advice: I should go back to SP1.. because their drivers may have some problems with SP2

Do you have any solutions for me? My company will move on to SP2. On 01/01/2005 they all want to use SP2 and me and my co-workers will have lots of problems..

Thanks for your help!

Mazze

A:Problem with SP2 and network

Most unusual. I have that same integrated ethernet on my file server running SP2 and I am not having any problems. Have you tried downloading and installing the latest drivers? You might have a corrupt driver.

Read other 3 answers