Over 1 million tech questions and answers.

error code 0x80070570 When installing win 7

Q: error code 0x80070570 When installing win 7

I get the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have windows Vista Home edition and I am trying to install either Windows 7 Home premium. I have the requirements it takes to put windows 7 on a computer. You can post on this thread to help me or if you need to email me for some reason it is [email protected]

RELEVANCY SCORE 200
Preferred Solution: error code 0x80070570 When installing win 7

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: error code 0x80070570 When installing win 7

Read other 6 answers
RELEVANCY SCORE 90.4

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

Read other answers
RELEVANCY SCORE 88.4

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

A:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 73.2

I tried to update my son's laptop with the latest "Cumulative Update for Windows 10 Version 1607 (KB3213986)", but after downloading the update I got : Error code: (0x80070570). The same thing happened with the December Cumulative Update and I thought that Microsoft would fix this in the January update? Apparently not. At all other computers at home there was no problem with the update. Any solutions?
 

Read other answers
RELEVANCY SCORE 73.2

Trying to install Windows 7 Pro and I keep getting the error code 0x80070570.
I have tried everything from removing ram, clearing BIOS, jumper configs, re-downloading the software, slow burn...etc...
Can someone help me please

A:How do I fix 0x80070570 error code??

Fill in your computer specs. Since it's a custom build, include the motherboard make and model.

Read other 5 answers
RELEVANCY SCORE 73.2

first of all sorry for my bad English..

I have downloaded windows8 developerPreview-32bit-English (2.8 GB) successfully..
made a bootable USB and tried to install (fresh install).
when it comes to expanding files at 57% it gave error code:0x80070570 and tried again.
same error..
tried to install on VMWare, Virtual Box directly with ISO..
same error.
on the other system with different configuration..
and again same error..

so, i searched on google. only the solution there may be problem with ISO is to re-download ISO..
but my net speed is very very low (download sppeds upto 12 kbps).
i downloaded it 2.8 with great difficulties.. (took 5 days to download.)

i can't download it again..

is there any alternate solution like rebuilding the ISO with working files.
is it possible to know which files of ISO are corrupted and replace them with working files..

pls help...

A:error code : 0x80070570

Sorry, but your best bet is to redownload. good luck.

Read other 5 answers
RELEVANCY SCORE 73.2

Get this error code 0x80070570
cant remove any programs or files
Windows 8.1
HP PC

Read other answers
RELEVANCY SCORE 72.4

Hi,

Hope someone can help me with this issue.

I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc.
I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive.
I got the same error code with DVD disc that I get with USB Flash drive.
I formatted HD during beginning of install so there is no OS on laptop...

Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.

I ran a MemTest86 and did a HD Test from BIOS and both passed.

Any thoughts?

Thank you all

gregmy123

A:Win 8 64 Bit Install Error Code 0x80070570

I would rebuild your USB install drive, you might have ended up with some corrupted files. Was this computer shipped with Win 8? if not then you'll need to set up your USB to boot UEFI, IE is has to be formatted fat 32, then on boot up hit which ever key on your computer that brings up a boot menu select you UEFI USB drive
UEFI Bootable USB Flash Drive - Create in Windows
Upgrade Install to Windows 8 or Windows 8.1

However I would use RUFUS to create your install USB thumb drive

Read other 7 answers
RELEVANCY SCORE 72.4

I keep getting error code 0x80070570
An unexpected error is keeping you from creating the folder. If you continue to receive this error,you can use the error code search to help with this problem

any suggestion to fix would be appreciated
Thanks
D

A:Need Some Help New To Windows 8 Error Code 0x80070570

When do you see this error message? Is it during install or while using Windows 8?

Read other 5 answers
RELEVANCY SCORE 71.6

I'm new guys so bear with me.

Just built a new rig, specs are in my bio but long story short I'm trying to install w7 fresh onto a sshd from a usb. When it gets to 15% during expanding windows files it gives me the error code 0x80070570. so here's what I've done: ensured sata settings are set to ahci, used different ram in different slots on mobo, format hd in cmd with diskpart, made sure ram settings good in uefi, redownloaded Iso file and reran program to make usb drive bootable. Currently I'm using the clean all command in disk part and then going to try and partition the drive. Should I be partitioning for the ssd? Is there something else I'm missing with the hybrid drive? I've been working at this for about 2 days and could use some help. Thanks in advance

Read other answers
RELEVANCY SCORE 71.6

I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.

I keep getting an error message to the effect thatWindows cannot install required files.
...
Error code: 0x80070570Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface

edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.

I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions . . . please . . . ?

ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message

A:Error code: 0x80070570 when attempting to install

Welcome surv1v0r.

Burn the iso again with imgburn @4x speed and try again!!

Good Luck

Read other 9 answers
RELEVANCY SCORE 71.6

I used to run windows 8.1 x64 but I had to reformat because I thought that would've fixed my problems installing windows 10. When I tried to install windows 8.1 x64 again it failed and got the 0x80070570 error. I also tried windows 7 64bit and windows 10 64 bit but I got the same errors. 32-bit OS installs fine though. Of course all my attemptse were clean installs.

Read other answers
RELEVANCY SCORE 71.6

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

A:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

Read other 5 answers
RELEVANCY SCORE 71.6
A:Error code: 0x80070570 during installation 7100 x86

As I have just posted on another thread put the iso back in utorrent and force a recheck. The same thing happened to me a couple of weeks ago and it turned out the iso was not complete. If it is complete try burning at slower speed.

Read other 4 answers
RELEVANCY SCORE 70.8

I have installed Win 8.1 in some different way than normal. I have sysprepped Win 8.1 in VMware and then saved a image using Clonezilla. When I installed/copied this image to a new computer I removed admin account - before that I have created another admin account with another name. I have RAID array which is my D: partition and when I tried to download file using utorrent it gave me - error the disk is unreadable or corrupted. If i try to copy one file in D: it gives also same error with code 0x80070570.

Read other answers
RELEVANCY SCORE 70.8

If you just want the solution page down .. it's in this blue

New shiny windows 7 disk arrives. ...... doesn't want to install ...

keep getting error message 0x80070570 when Windows 7 is expanding files:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...

Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.

So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.

Always the same thing:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).

EASY SOLUTION:

I don't wait weekends for answers (nor do I usu... Read more

A:0x80070570 Error Code on install - One Easy Solution

thanks for telling them , they're flooded with all sorts of setup issues (most of which are resolved with hardware removal)

Read other 9 answers
RELEVANCY SCORE 70.4

For the last few days, the system BackUp on my external hard drive is getting failed with error code 0x80070570 after completing nearly 95%. The backup consists of system images and other folders that windows automatically choose. Even when trying to run backup without the system images, the backup fails. As per my findings, the 'AppData folder' in additional locations is creating the problem as removing it from backup settings does solve the problem. But this problem didn't exist a few days ago and while letting windows choose what to backup, brings back the problem. How to fix it?

A:Unable to complete System BackUp, Error Code 0x80070570

Hello UrAshish mate maybe it is worth running a test on that drive because that error code covers other issues that come up on a Google.

SeaTools for Windows | Seagate

Read other 3 answers
RELEVANCY SCORE 70.4

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

A:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

Read other 9 answers
RELEVANCY SCORE 70.4

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 70

I recently bought a new SSD ( Crucial MX100 512 GB)
and I wanted to install windows on it, but for the past couple days I've encountered the same error over and over.
Gyazo - cbdee771428da741b21b6b921a8230b5.png
I've burned the ISO on a disk and USB, both of them coming up with the same error. I've even tried a different ISO (Windows 7 Ultimate and Windows 8.1 Pro)
I have updated my bios and also unplugged and plugged back in my ram. I've practically tried everything that came up while googling this error.

A:Installing Windows Error 0x80070570

It's possible that the SATA drivers aren't recognized during the Windows 7 or 8 extraction portion of setup (In your BIOS may also need to be set with AHCI). Usually Load SATA drivers before actual install begins. May need to look for updates to the drivers at manufacturer's site of motherboard.

Make sure did it correctly look at these, something could be corrupt with ISO you made

http://www.eightforums.com/.../2227-create-bootable-usb-dvd-windows-8-iso.html

http://www.eightforums.com/.../18309-windows-8-windows-8-1-iso-download- create.html

Read other 11 answers
RELEVANCY SCORE 69.2

I just received my new computer parts. Me being pretty much a newbie when it comes to computers, I got some help from two friends to build it.

Now, when I want to install my OS (win7 home premium 64 bit - CD bought from store) on my SSD, I get the error 0x80070570 - corrupt files during the "Expanding Window files" process. I have used that CD to install on my previous PC with no problem.

Thinking the CD was the problem, I downloaded a ISO and burned it with PowerISO. Tried installing and same problem happens.

Reading on the internet from multiple forums, some mentioned trying with a 2gb ram stick only. Not having a 2gb stick, i still tried removing one of them (4gb sticks).

Doing that i managed to complete installation until the "Completing..." part of the install, at which step computer crashed with a BSOD.

Here is a summary of things I have tried:
-2 different ISO
-Installing on my HDD
-Clearing CMOS
-Restoring BIOS to default
-Trying 1 stick of RAM (4gb)
-Transferring SSD on working computer, installed Windows, then transferred to new computer using Sysprep

Nothing of those helped me.

Recently I Flashed my BIOS with the most recent update (Z68BFC15.BST). I managed to install windows and drivers, but when i add my 2nd stick of RAM (total 8gb) computer won't boot (BSOD at windows loading page).

Is it hardware problems? If so how can i know which part is causing it?

Thanks all for the help

A:Error installing OS on fresh new computer (0x80070570)

Welcome to the forum Tamaraine
Take a look at the following thread, maybe it will be for some help:

Installing Windows Beta 7 Error Code: 0X80070570 - Geeks to Go Forums

Read other 3 answers
RELEVANCY SCORE 69.2

hello Experts ;  with an original Hp media wind 10 64 bit also with a new HDD , the install fails with the eroor 0x80070570 .  mother board was also replaced  , could someone help please ??  the problem is that it's a new HDD (first install ) the error occurs just after copying files ( at 4% of install process ) . so we don't have access to the OS to perform "reset this pc in wind 10 " and we don't have possibility to do a recover because no install was done before . i also tried with a well knowed working memory board and the result is the same just per info the uefi passed successfully and tried with a mini hardware config and always the same . the CD is original (HP media ) , i'm suspecting files that are not well copied from source .i read on some discussions that the DVD lens could be sometimes the root cause . could you please help ?  thanks in advance .

Read other answers
RELEVANCY SCORE 69.2

Hello,

I've recently built a new computer:

850w thortech psu
asus 990 fx sabertooth mobo
phenom II x4 965 @ stock
msi 7850 2gb
2x4gb g.skill sniper 1866
ocz vertex 3 ssd 120gb
seagate barracuda 1tb 7200rpm
RAIDMAX AZTEC ATX-619WB case

On first boot it went straight to bios which was great. I then attempted to install windows 7 home premium 64 bit, selected my ssd, and as it was expanding files it got to 13% and then i got the 0x80070570 error.

I read some of the other posts here about the error, most pertaining to ram. the easiest fix i saw was to just try a couple more times to install, but it kept getting stuck at 13%.

tried booting without ram, got nothing on-screen. tried booting with ram in again, nothing on-screen. tried rearranging ram, only putting one of the sticks in, etc. but still nothing on-screen.

my mobo has a few lights on it to indicate whether there's a problem with a certain component. at first i had none of these lights on, but now (ever since I took the ram out) the ram light is on whenever i try to boot (even with ram back in its original position when i could at least boot into the bios).

EDIT: Was able to boot into bios randomly, but only one stick of ram is recognized (4gb) and its at the wrong speed (1600 instead of 1866). tried installing windows again (custom obviously, then selected my SSD), got the same error during 'expanding files'. I'm assuming at least one stick of my ram is bad at this point considering that one of them isn't eve... Read more

A:error 0x80070570 while installing, now won't show anything on-screen

The error (x80080570 0r 1397) seems to indicate:






Quote:
The file or directory is corrupted and unreadable.


Could your install media be corrupt?

Be very careful moving RAM. In case you do not know, is it very susceptible to static electricity damage.

I suppose thinking the RAM was causing a problem could be a possibility. Running Memtest for an extended period might give you some information, but I would try another install DVD first.

I don't know much about AMD processors, but you do think the motherboard's bios is aware of yours?

Read other 3 answers
RELEVANCY SCORE 68.4

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (Why?).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, bith IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

Read other answers
RELEVANCY SCORE 68.4

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (WHY??).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, both IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

Read other answers
RELEVANCY SCORE 68.4

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (WHY??).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, both IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

A:Error 0x80070570 when installing ANY 32bit version of Windows

Stupid me....
The title says: "Error 0x80070570 when installing ANY 32bit version of Windows"
But my problem is with 64bit

Just changed it now.

Note: if you are still confused, my real problem is with 64bit versions.
The correct title is: "Error 0x80070570 when installing ANY 64bit version of Windows"

Read other 1 answers
RELEVANCY SCORE 67.2

Hello,

I am trying to install Windows 7 on my ASUS laptop. I tried different types of harddisks but it still does not work. Also I did a memtest.

I am booting the intallation from a usb disk.

Here a picture of the error:

http://oi59.tinypic.com/710a5d.jpg

Thanks in advance!

A:Error installing Windows 7 - error: 0x80070570

How was the USB stick prepared? For Legacy BIOS use Windows 7 USB-DVD Download Tool
but for UEFI BIOS' you must use Option One from UEFI Bootable USB Flash Drive - Create in Windows and then boot the stick as a UEFI device.

Otherwise follow these steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 59.6

Hi heroes,
I can't install win 7 on my brother's laptop. error 0x80070570, file missing or corrupted.
I've seek solution on the net but nothing seems to work.
Laptop decription: ACER Inspire 7250, AMD proc. 64bits,8 Go RAM, HDD 500 Go, 3 partitions : 1.PQSERVICE(OEM) with windows and drivers 2.System reserved 3.Principal
What I tried (I used 8Go USB card with windows usb download tool):
- format principal drive and install clean windows -> format ok, install failed at 4% code 0x80070570
- use (shift) + alt + F10 at startup to reset at factory default -> nothing happened
- download another iso of windows -> same error
- try another version of windows -> same error
- verify integrity of all memories -> errors found on the HDD clusters moved in quarantine -> same error
- plug the HDD on my desktop and try install windows -> same error
- format and delete all partitions on the HDD, except the RECOVERY OEM reserved and create new clear partition -> same problem
No more ideas... please help

A:Unable to install win 7 (code 0x80070570)

Try another flash stick or DVD using the ISO and tool to burn to disk/stick in Clean Reinstall - Factory OEM Windows 7 which steps will assure you get and keep a perfect install. Since Acer Recovery will not run after a Clean Reinstall to C, delete all partitions during the booted install.

If this fails work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums reporting back any failure by when it happened and any error or other behavior.

If these fail test your hard drive using the maker's HD Diagnostic extended CD scan, followed by another Disk Check run from installer's Command Line on the full disk partition you created.

Read other 7 answers
RELEVANCY SCORE 58.4

Hey guys,

A week ago I started having BSOD issues when I logged into my laptop (even if I wasn't doing anything) which I got round to addressing today. I booted into safe mode and the BSODs stopped. Since my laptops been in use for a while and was getting cluttered, I thought I'd do a fresh install of win 7.

This is where the issue lies. I've tried installing Win 7 ultimate (x86 and x64), win 7 professional(x86) and win 7 home premium (x64), all legit, through either a USB or installation discs which have all worked before. However, everytime I get the 0x80070570 and I have no idea what to do. Occasionally I also get differing BSODs with titles like "bad pool header" or "cache_manager" but these are very rare. More often than not, installation quits due to 0x80070570 error.

I'm beginning to think this may be a hardware fault. It is a Sony Vaio VPCEB44FX.

Any help would be appreciated.

Many thanks,
Baggy

A:0x80070570 when installing win 7

baggy welcome to SevenForums

Start off by testing your RAM

RAM - Test with Memtest86+



   Note
You will need a USB flash Drive

Read other 9 answers
RELEVANCY SCORE 53.6

Hope somebody can help me with this issue. I have a Samsung X120 laptop and I needed to install a new Hard disk as the original was playing up. So I cloned a new 500 gb W/D H/D and it worked perfectly, all except WLM which now comes up with an error code 0x8E5E0247 corrupt calendar. I've checked and it would appear to be an Intel problem or so the forums tell me, so I've tried downloading Intel Rapid Storage Technology Software but it's still coming up with the same error. I'm not sure if I've installed the patch properly so can anyone tell me if I've got the right fix or if they know how I can resolve this problem. I know a little about PC's so a step by step would be a great help or whether removing WLM will cure it on a reinstall. Any help greatly appreciated.

A:Error code in WLM since installing new H/D

Just checking but is there no one who can help me with this problem?

Read other 2 answers
RELEVANCY SCORE 53.6

Hello,

Before I start can I please say I am not a techy person, so you might have to be patient with me lol!

I have an old laptop from an ex employee and thought I would see if it would work. There is 2 Versions of XP installed on it - Pro and Home Edition

When I boot the computer it ask's me which one I would like to use.

If I choose Pro - It does not load and I just get a black screen

If I choose Home - Windows loads but then I get a wizard box saying new hardware found, and ask is I want to use windows to search for software - I agree to this but nothing is found.

I thought that it would then be easier to just reload Windows XP Home Edition and start again.

When I insert the disc, it asks to press any key to boot from cd, then it starts to check the computer for setup and I get the following error message:

File i386 l_ints.nls could not be loaded, This is error code 7

Can someone please help me and tell me what I need to do????

The Laptop is a Dell Latitude D610.

Thanks x x

A:Installing XP - Error code 7

start out by testing the hard drive

http://www.tacktech.com/display.cfm?ttid=287

How to make a bootable CD

Read other 1 answers
RELEVANCY SCORE 53.6

"System Setup Log - (C:\WINDOWS\setuperr.log)

Error:

The D:\I386\NT5.CAT catalog file could not be found. The error code is 17. This is a fatal error.

Data error (cyclic redundancy check).

xxx

Error:

The signature for Windows XP Home Edition Setup is invalid. The error code is 17.

Data error (cyclic redundancy check).

xxx

Fatal Error:

Setup failed to install the product catalogs. This is a fatal error. The setup log files should contain more information.

xxx "
i keep getting this after patitioning my hard-drive before the installation will continue this comes up and it restarts the process until it gets to the same point. Ive had to do several things to even get this far any advice would be appreciated.
 

A:error code is 17 (when installing xp)

Read other 6 answers
RELEVANCY SCORE 53.6

error code is 17 (when installing xp) "System Setup Log - (C:\WINDOWS\setuperr.log)

Error:

The D:\I386\NT5.CAT catalog file could not be found. The error code is 17. This is a fatal error.

Data error (cyclic redundancy check).

xxx

Error:

The signature for Windows XP Home Edition Setup is invalid. The error code is 17.

Data error (cyclic redundancy check).

xxx

Fatal Error:

Setup failed to install the product catalogs. This is a fatal error. The setup log files should contain more information.

xxx "
i keep getting this after patitioning my hard-drive before the installation will continue this comes up and it restarts the process until it gets to the same point. Ive had to do several things to even get this far any advice would be appreciated.
 

A:Error code is 17 (when installing xp)

hiya,check the disc is not scratched make sure it has no smudges and is clean,try a different cd/dvd rom,if you have not got a spare see if a friend would be willing to let you try their's.
 

Read other 1 answers
RELEVANCY SCORE 52.8

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

Read other answers
RELEVANCY SCORE 52.8

My relatively new seagate harddrive failed on me last week so I requested a replacement. It arrived (refurbished model..) and upon putting it in and trying to install Windows, the following occurs.

After selecting custom install windows attempts to copy files. It hangs at 0% for 10-15 minutes and then spits out an error message stating "Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057".

And then I notice a new 100 mb partition appears. I cannot get by this step. I cannot install windows onto this harddrive. I've done some searching but most solutions require being able to boot into a functioning version of windows, which I cannot as the drive is "new".

The motherboard is an Asrock B75M running Uefi bios
The attempted install of windows is Windows 7 Ultimate SP1
The harddrive is a Seagate 1TB drive

A:Error code 0x80070057 when installing

Apologies for the thread. Problem solved. Issue was a faulty sata cable

Read other 2 answers
RELEVANCY SCORE 52.8

When attempting to update to SP1, it fails and spits out error code 80070020. I haven't had any issues with other updates.

Thanks for any help.

Read other answers
RELEVANCY SCORE 52.8

I cannot download Windows 7 SP1 from the .iso or through the updater. I have ran the system readiness tool and it discovered 96 errors that could not be repaired. How do I fix the errors? I am able to install other updates, just not this Windows 7 SP1 update on a PC running Windows 7 Home Premium x64.

A:Code 2 error for installing Win 7 SP1 update

You have some major problems, I suspect.
Here's the summary from your CheckSUR log...

Code:
Seconds executed: 5478
Found 96 errors
CBS MUM Missing Total count: 96
Ordinarily, this number may not present a problem, but in your case, the files involved are all from the original RTM install of Windows, and not from updates. They are all also the Spanish MUI files.
This makes me wonder whether you have used a hack to install Language packs outside the license terms.

Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

Read other 9 answers
RELEVANCY SCORE 52.8

Hi,

So I installed windows 8 but I didn't like it so much, no problem so far.
But then a few days ago my laptop freezed during the bootup and when i turned it on it was like an half an hour to start and then when I got into the dekstop everything was running so slow! You couldn't even open textpad or something. So I stopped my downloaded windows 7 installation cd into my laptop and did everything till i came to the partitions. There (as I read) deleted all the partitions and made 2 new ones( 1 for windows and 1 for games and so on. Then I click on next and i get a error code: something like : couldn't format the hard drive. error code 0x8007005
I tried the DISK PART thing and nothing other happened.
I tried to do in the BIOS from IDE to AHCI and backwards, nothing worked.

What am I supposed to do now?
Thanks in advance!
(sorry for bad grammar if there is any, I'm from Holland)

A:error code 0x80070057 while installing W7

By the way I have an Asus n56vz-s4035v.

Read other 9 answers
RELEVANCY SCORE 52.8

I have Windows Vista Ultimate x64 edition. When i try installing SP1 i keep coming up with the same error code. I've checked to see if my computer installed SP1 on its own and it hasn't. I've received this code before not being able to install other updates as well. i obviously went to microsofts website to find out what the error code entailed and to see if there was a solution. according to microsoft my Windows Moduler Installer is out of date and needs to be update and that by simply using Windows Update it will update the moduler. I'm finding a problem with that. My updater runs every day. I even manually run it sometimes. According to my updater there are no updates available well minus the 33 language packs. I've got it set to receive all updates windows and non-windows alike. I've even tried installing the language packs but i get the same error. Any help how to solve this would be great.
 

A:Error code: 0x800F0823 when installing SP1

Read other 6 answers
RELEVANCY SCORE 52.8

Im getting this error code 800736B3. Can anyone help me.

A:error code 800736B3 installing SP1

Put the win7 disc in and choose upgrade then after that it will restart.

After you have acepted the upgrade it will allow you to install the sp1 .

Once win7 has upgraded ,but still keeping your system in tact ,will start the whole update process. After about a hour or two of updates it will install sp1 with no issue .

Also if you are useing a highend gaming card virus protect etc it might keep it from installing as well

Read other 1 answers
RELEVANCY SCORE 52.8

Hello,

I have been trying to install service pack 1 for windows 7 x64 for a bit now and I keep getting error 80070570 and it refuses to download. I am hoping we can figure it out together.


I ran SURT and did an SFC scan. I also attached the CBS.zip file for you guys. SFC scan said that it did not find any integrity violations.

A:SP1 Not installing Error Code 80070570

So after scouring the net and trying every troubleshoot option it gave me I was going to just give up and try a fresh reinstall. Yeah. Apparently, the boot registry is corrupt or something? I tried the disc in another computer and it worked as well as tried a different disc in general to make sure the hardware was working and it all seems to be in order. Not sure where I can go now.

Read other 9 answers
RELEVANCY SCORE 52.8

hi I get an error code 0x80070037 when trying to installing windows 7 any ideas? I used another windows disc still get the error help

A:help getting error code when installing windows 7

There's some sort of hardware issue occurring. The error means that the device (i.e. storage device) is no longer available. Is this a new system or hard drive? You may want to try disconnecting the hard drive power/data cables from both motherboard and drive ends and reconnect them.

Also it might happen if your motherboard or whatever RAID card you have installed needs drivers to read storage drives connected too it. To do that you will need to have a USB available with the drivers or have them slipstreamed on the Windows 7 disc, then when setting up drive to install Windows click the "Load drivers" button and find and load them from there.

Read other 1 answers
RELEVANCY SCORE 52.8

I'm having a problem installing Windows XP, when it starts copying files i get the error message "Ntkrnlmp.exe Could Not Be Loaded Error Code 7"

I've tried this http://support.microsoft.com/?kbid=812580 already but that didn't work.
 

Read other answers
RELEVANCY SCORE 52.8

I am running Windows 2000. I have a Delkin Devices Pocket Reader 9. I have installed and uninstalled the drivers for this product numerous times, even downloading from their website. Whenever I plug in the reader I get a blue screen with the error message "Kmode_exception_not_handled_". When I unplug the Reader all is good. Any ideas?
 

A:Error code when installing USB device

You might look this up at google. I found some info not at the microsoft page anymore but under the "cached" section of the search results. I tried to link to it but it kept coming up wrong for some reason, no matter how I tried to go about it.
 

Read other 1 answers
RELEVANCY SCORE 52.8

First timer here, so please bear with me. Any help you can offer is MUCH appreciated!

Some of the files on my SD card have changed file extensions and appear corrupted (the modified dates are wonky and the file sizes are off). For example, a file that was formerly IMG_3324.JPG is now MG_3324J.PG, and I can't open, copy, or rename the file. When I try, I receive Error 0x80070570: The file or directory is corrupted and unreadable.

I have gone into Properties>Tools>Check. I receive the following: "We found errors on this drive. To prevent data loss, repair this drive now." However, when I click Repair Drive, I just receive the error, "There was a problem scanning and repairing this drive..."

Most of the files on the SD card are readable and work just fine. I was able to copy them to another location; however, there are about 60 or so corrupted files that I would like to repair (I don't want to lose the pictures!).

Also, any ideas what causes these errors? I want to make sure I don't repeat this in the future :-/

I'm running Windows 10, and the SD card is a Dane-Elec Proline 4GB card.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, Intel64 Family 6 Model 78 Stepping 3
Processor Count: 4
RAM: 8084 Mb
Graphics Card: Intel(R) HD Graphics 520, 1024 Mb
Hard Drives: C: 237 GB (154 GB Free);
Motherboard: ASUSTeK COMPUTER INC., K501... Read more

Read other answers
RELEVANCY SCORE 52.4

I've had this flash drive for about a year and a half or something like that, and when I go to open a specific folder on it, a message comes up that says, "The file or directory is corrupted and unreadable. Error 0x80070570." I am able to open any other file fine except this one. Is there anyway to fix it?
 

A:Error 0x80070570

What operating system do you have? Windows 7?
 

Read other 3 answers