Over 1 million tech questions and answers.

Broken download link for P50 Thunderbolt 3 NVM firmware Update

Q: Broken download link for P50 Thunderbolt 3 NVM firmware Update

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Broken download link for P50 Thunderbolt 3 NVM firmware Update

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 142

I was attempting to download the latest Thunderbolt 3 NVM firmware update for the ThinkPad P50 as a result of  following the guide here -> https://support.lenovo.com/us/en/solutions/SF16-T0051    However, when attempting to download the firmware update itself via the link provided within the text -> http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P50... It results in a page not found error. I could have sworn this update was there a short time ago and I can see from other forum posts that it worked in the past. Is this just a glitch or is there a newer TB3 NVM update available? Thanks in advance for any help or guidance! 

Read other answers
RELEVANCY SCORE 84.8

Hello,the thunderbolt on my X380 Yoga completely stopped working. As I try to connect a P27h for instance, the laptop charges but does not recognize the monitor or USB Hub.I installed every update available on system update and tried to update the Thunderbolt Software and Firmware. The software installed fine but upon updating the firmware the following promt appears:    When I check the version inside the Thunderbold software, this is what shows up:    I am running Windows 10 Home 1803. Any idea why this is not working? Is my thunderbolt controller not working properly?Thanks

A:Thunderbolt not working / Unable to update thunderbolt firmware

There is an issue with the update for the tunderbolt firmware when updating through the system update utility. This is a known issue that the Engineering department has been working on. The only known resolution to this issue so far has been to replace the system board. Im sorry for the inconvenience this is causing. If the device is still under warranty i would speak with the support center to have a tech install a new board.

Read other 1 answers
RELEVANCY SCORE 84.8

I just got my X1 Extreme yesterday. I updated the BIOS to 1.15 and also updated other drivers. The one pending thing is the Thunderbolt firmware update utility. The first pop-up says "do not connect any Thunderbolt device", but then a second pop-up right before the firmware update says "connect at least one Thunderbolt device. I cancelled the update for now due to the conflicting pop-up messages. Note - I do not have any Thunderbolt devices connected to my X1E laptop. Can I upgrade Thunderbolt firmware safely with no Thunderbolt devices connected, or?

Read other answers
RELEVANCY SCORE 83.6

January 4, 2018?KB4056895 (Monthly Rollup) refers to KB4056895 in the
How to get this update paragraph but
link to Microsoft Update Catalog is broken and returns no files. The update is still not available via automatic Windows Update while it is supposed to be from Jan 4.
I have already tried
Microsoft Update Catalog support page:

provided email doesn't work, it always rejects my email message with error it accepts emails from a particular group onlylink to newsgroups redirects to Answers forum where
I have already tried to get support without any resultthe last link to support form is broken

It is really frustrating there is no way to report missing Windows Update download that contains critical security updates.

Read other answers
RELEVANCY SCORE 83.6

I am receiving the error 8007000e at Windows Update, and I was told the solution was to download this specific update, downloadable from the official Microsoft site:
https://www.microsoft.com/en-us/download/details.aspx?id=47352
But when I click the Download button, after a long wait, I receive a message saying:
 We are sorry, the page you requested cannot be found(Still in the microsoft site)
I've already tried the same link in two different computers with the same results, the one with the Windows Update error it's an old Packard Bell
Dot s2 netbook with Windows 7 Starter and 2Gb RAM, that hasn't been updated in two years.
I would like to know if the link could be fixed,
but at the same time, now that I'm here, I'd also like to know if it's correct that downloading this update will resolve the Windows Update error.
Thanks.

Read other answers
RELEVANCY SCORE 76.8

I note a new P51 (models 20HH, 20HJ) Thunderbolt Firmware update has just been posted on the support drivers page (24 Jul 2018) which is great news, but it's release note refers to Thunderbolt driver / software version 17.3.74.400. The Thunderbolt driver software currently available on the P51 20HH, 20HJ support drivers page is version 17.1.64.250, which is quite old. Please would you also put the latest Thunderbolt Software on this support drivers page. BTW: The P51 (models 20MM, 20MN) support drivers page does has the latest Thunderbolt Software (17.3.74.400), so I assume this could be installed on a P51 (models 20HH, 20HJ), as all models use the same Thunderbolt controller - ID 15D9 (Intel JHL6340).

Read other answers
RELEVANCY SCORE 76.8

Hello, I am trying to use a Thunderbolt 3 to Thunderbolt 2 adapter (StarTech brand) to connect my P50 to a Resident Audio T4 Thunderbolt audio interface. The device is briefly detected and then disappears. I have been doing some research to resolve this issue and a few users have said that updating thier Thunderbolt NVM to 18 add compatibility with the adapter.  Would it be possible to get an upgrade from the current NVM16 to NVM18? Current P50 firmware (NVM16) link here:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50... I have already attempted to install the NVM18 firmware straight from Intel but it looks like the firmware is OEM specific. Thanks!

Read other answers
RELEVANCY SCORE 76.4

Lenovo Vantage updated the T480s BIOS on 8/9. I immediately started getting a Thunderbolt error when starting Windows 10 64, which says to update the Thunderbolt firmware. I downloaded the current firmware from Lenovo (n22th06w) but I get the following error when trying to update: 0x20D SDK_INVALID_OPERATION_IN_SAFE_MODE What's the solution, Lenovo? Thanks.  

Read other answers
RELEVANCY SCORE 76

So, brand new WD15 connected via USB-C to an Inspirion 7000 7278 laptop under Linux. No complaints with the display, ethernet or USB-ness. I did notice, however, that there is a newer firmware available. No biggie, I boot into windows and attempt to flash the update. And then I get the 'no thunderbolt dock found cannot flash...'
So, just how are we supposed to flash firmware on the dock if we don't have a thunderbolt connection?

John

Read other answers
RELEVANCY SCORE 76

For some reason the firmware for thunderbolt won't update on my p70. I've tried installing from a command prompt and using the installer. Either way it seems to work but the firmware version doesn't change. I have the hdmi cable connected to a monitor and have the thunderbolt software running. I've rebooted and tried again. I've booted into safe mode then rebooted and tried again. I've uninstalled the thunderbolt controller and tried again all to no avail. Ideas anyone? Thanks in advance.

A:P70 HDMI Thunderbolt Firmware won't update

Badhabit_wb,
 
I'm sorry to hear the Thunderbolt firmware installation was unsuccessful.
 
Lenovo is in the process of publishing a Service TIP that includes step-by-step instructions on how to check the Thunderbolt firmware version as well as a comprehensive guide to installing it.
 
I will post the link here once it goes live in the next day or two.
 
Thank you,

Read other 3 answers
RELEVANCY SCORE 76

Hi.  I received the following when opening lenovo Vantage; A Thunderbolt controller has experienced a problem and cannot connect to devices or other computers until new firmware is installed.  Other Thuderbolt ports may be functioning normally.  Please contact PC manufacturer for a firmware update to restore full Thunderbolt functionality. What can I do to overcome this?BRCappi

A:T470 Thunderbolt firmware update

Have you tried installing the latest firmware from here?  https://pcsupport.lenovo.com/us/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-T-SERIES-LAPTOPS/THINKPAD-...
 
What happens?

Read other 1 answers
RELEVANCY SCORE 75.2

Does anyone have problems during the installation of Tunderbolt 3 firmware update? Mine just got an error that says "This method is not implemented in any class". The update to be installed is "Thunderbolt Firmware Update Utility for Windows 10 (64-bit), 8.1 (64-bit), 7 (32-bit, 64-bit) - ThinkPad P51s".

Read other answers
RELEVANCY SCORE 75.2

While trying to update the thunderbolt firmware update utility, I get the attached error message.  It happens every time.  Please tell me how to fix this. Dav Vandenbroucke

Read other answers
RELEVANCY SCORE 75.2

Hello, I have purchased this week the Thunderbolt 3 Workstation dock. It work well until today. Yesterday (Feb 1st) evening I ran the Lenovo Vantage update which updated a bunch of things. Interesting ones: Thunderbolt 3 Dock Firmware Utility and BIOS update.Everything seem to work fine. This morning, first issue: after docking the PC, the Ethernet controller from the Thunderbolt dock didn't seem active. Other attached devices (monitors, mouse) were OK. My reflex: "restart" the dock, i.e. disconnect/reconnect the power cables. And then the dock ceased to work. It looks like if it's "bricked". The power led is on, but pushing the button (or long press) doesn't do anything. Relating to the updates from yesterday, I'd say that it's somehow related to them. And/or maybe an issue with the Thunderbolt software/drivers on PC? I tryed to uninstall/reinstall the Thunderbolt software on the PC. I find curious that:immediately after install, "Attached Thunderbolt Devices" shows "Port 1", "Port 2". By install I mean I open Lenovo Vantage and do a "Check for updates". It doesn't tell me that it had installed something, but it triggers the download and install in the background.Also I see in Device Manager: Device Manager/System/Thunderbolt Controllerafter restart, the list is empty, and in Device Manager there is no more "Thunderbold Controller"  Have you got any hints? Thanks in advance,Cristian.

Read other answers
RELEVANCY SCORE 75.2

Hi, Lenovo recently released a firmware update in the Lenovo Vantage app for the thunderbolt port on my 5th Gen X1 but the update seems to fail. Also tried the update by downloading it direct from Lenovo support website but getting the same error.  Any suggestions? Cheers 





ThinkPad X220i7-2620MCorsair Neutron GTX SSD 480gb8gb Crucial RAMIPS 12.5 3x3 displayIntel Ultimate N6300 wifi9 cell batterybluetoothFingerprint readerWin 7 Pro 64 bit

Read other answers
RELEVANCY SCORE 75.2

On my P52, I was prompted to install an update, Thunderbolt Firmware Utility - V1.0.12-N2CHF10W. However, it did not install, and I thought I saw something on here about people having issues with that. What's going on? Should I bother trying to install the update? It tried to have me connect a TB device, and I was scared I'd brick something.

Read other answers
RELEVANCY SCORE 75.2

I have a T470S type 20HF running windows 10 (version 1703) that suddenly the Intel Thunderbolt Driver was updated and gives me the error "A Thunderbolt controller has experienced a problem and cannot connect to devices or other computers until new firmware is installed." The computer is connected through a usb-c cable to a dockin station which has two monitors connected through display port cables. I tried uninstalling the Intel Tunderbolt Software (ver. 17.4.78.500) and reinstalling it.I tried installing thinkpad thunderbolt 3 dock and usc-c dock driver v10017.I tried to install new firmware with the file N1WTH07W but it says "cannot find correct bin file" I still get the same error and cannot use the monitors connected to the docking station. Please help.

Read other answers
RELEVANCY SCORE 75.2

The Thunderbolt firmware update to correct HDMI issues for the P70 is now available in the Support section:
 
http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P70...
 
 
 
 

Read other answers
RELEVANCY SCORE 75.2

Hello,  My Thunderbolt dock stopped working with the error message "Not all Thunderbolt ports are functioning properly, please contact PC manufacturer for a firmware update".  So I went to "Display and Videos Graphics" and tried to run the "Thunderbolt firmware update tool for Windows tool"  and get the error message below. Any idea how this can be fixed?  Thank you! 

Read other answers
RELEVANCY SCORE 75.2

I have a T470 20HD running Windows 10 Pro. Both the operating system and all Lenovo updates have been applied. Attached to thos is a Plugable-brand USB3 dual HDMI docking station that's been driving a pair of Dell SE2417HG(HDMI2) screens. Or did, until I did the Integrated Firmware of Thunderbolt Function 1.0.12.0-N1QTF16W update, at which point it now only drives a single screen. Windows sees both displays but now can't use one. I've tested both displays and they work fine otherwise, and if I unplug one display the dock will "fail over" to the other display without an issue.Is there a way to roll back this firmware update, or am I basically out of luck? 

Read other answers
RELEVANCY SCORE 75.2

I installed firmware update N25TF08W via the utility. After doing so only one of my thunderbolt ports will actually charge the computer. The other recognizes that the power supply is plugged in but fails to start charging. I don't know the underlying issue yet, but a PSA...

Read other answers
RELEVANCY SCORE 75.2

Hi, i have a T470 that connects to a UCB C Lenvo thunderbolt dock, occasinly it requires the firmware to be updated (i done this last month) however it is erroring again saying i need to conncact my pc manufacturer for new firmware, i have just checked and there is no new firmware on the lneovo website, i installed all the latested packages that were there, does nayone know where i can get the new firmware and if there is any workaround? The dock is not showing as connected in the dock software window, however the dock light goes from yellow to white when i polug it into the laptop, so it does see the connection they just cant talk to each other. Thanks 

Read other answers
RELEVANCY SCORE 74.4

Hey all! I can't seem to get my firmware to update....I just get this: Has anyone seen this and have any advice? I've consulted Google and the forums here and can't seem to get any leads. I'm running a T480 with the latest updates per the support site and the System Update 5 tool. Thanks in advance! 

Read other answers
RELEVANCY SCORE 74.4

Why no Thunderbolt firmware for 720S-141KB ...???https://pcsupport.lenovo.com/us/en/downloads/DS500874 I see it here for X1...https://pcsupport.lenovo.com/us/en/downloads/DS120382 Here for ThinkPad X380 Yoga...https://pcsupport.lenovo.com/us/en/downloads/DS502887 Here for X25...https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-... What's up?

Read other answers
RELEVANCY SCORE 73.6

Same issue. Latest Thunderbolt Firmware update made my HDMI output unusable. I can not connect to an external monitor. We need a fix ASAP! Dell technical support was unable to help so far...

Read other answers
RELEVANCY SCORE 73.6

have anyone seen the 16.0.0.2-R0STF14W 2018/08/07 updater fail to update the Thunderbolt firmware? i tried both manually download the packagehttps://pcsupport.lenovo.com/ec/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-X-SERIES-LAPTOPS/THINKPAD-...orvia Vantage, both got no error message, but the firmware wasn't updated.completly running Detect2016.exe said the build ID is still R0STF13W, release note said it should have go to R0STF14WNVM image is 14 though. Vantage wil detect machine has old version and want to do it again.  I let it do it three times, same things. Thunderbolt Driver has been updated to 17.3.74.8 (package version 17.3.74.400) before firmware update 

Read other answers
RELEVANCY SCORE 73.6

Hi,UEFI is at the latest Downloadable version but the much older Thunderbolt Firmware from 2017 says the BIOS is not up to date.Why isn't there a working Thunderbolt Firmware Flash tool ... it probably does the version check wrong. Theoretically one could try with a old BIOS, but the Update text states that it is not possible to go below 1.44.Intel Alpine Ridge Thunderbolt Firmware for Windows 10 (64-bit), 8.1 (64-bit), 7 (64-bit) - ThinkPad P50  -- v25This was released on 09 May 2017, so the BIOS at this Time was either 1.39 or 1.40.  The following versions of UEFI BIOS and ECP (Embedded Controller Program) have
been released to date.

Package (ID) UEFI BIOS (BIOS ID) ECP (ECP ID) Rev. Issue Date
---------------- -------------------- ---------------- ---- ----------
1.53 (N1EUJ36W) 1.53 (N1EET80W) 1.18 (N1EHT38W) 01 2018/09/26
1.52 (N1EUJ35W) 1.52 (N1EET79W) 1.17 (N1EHT37W) 01 2018/07/26
1.51 (N1EUJ34W) 1.51 (N1EET78W) 1.17 (N1EHT37W) 01 2018/06/12
1.50 (N1EUJ33W) 1.50 (N1EET77W) 1.17 (N1EHT37W) 01 2018/04/09
1.49 (N1EUJ32W) 1.49 (N1EET76W) 1.17 (N1EHT37W) 01 2018/03/06
1.48 (N1EUJ31W) 1.48 (N1EET75W) 1.17 (N1EHT37W) 02 2018/02/06
1.48 (N1EUJ31W) 1.48 (N1EET75W) 1.17 (N1EHT37W) 01 2017/12/19
1.47 (N1EUJ30W) 1.47 (N1EET74W) 1.17 (N1EHT37W) 01 2017/11/30
1.46 (N1EUJ29W) 1.46 (N1EET73W) 1.16 ... Read more

Read other answers
RELEVANCY SCORE 73.6

Hello, I hope someone can help me here. Over the last two months, I have been trying to install the lastest Thunderbolt Firmware Update 1.0.12.0-N23TF13W. Each time I run the update I get the following error:  Also here are the Thunderbolt driver info.  I'm at a lost on how to proceed, please let me know how to proceed. Thanks   

Read other answers
RELEVANCY SCORE 73.6

 The title literally.I am under stress from a recent failure to update.This will stop with an error of 85%.I am using X1 yoga 2nd gen (20JD) with Thunderbolt3 dock(by Lenovo ThinkPad), and the BIOS version installed on my laptop is N1NET42W 1.29PLZ. Help me

Read other answers
RELEVANCY SCORE 73.6

I would like to update the thunderbolt firmware on my Lenovo Thinkpad T580. However the Firmware Update tool tels me "Firmware file (*.bin) not found in folder". I ran the update through Vantage and though the pcsupport download link.I follow the steps in the readme, admin account and all that, but with the same result.When I click next and ignore the file not found warning I get the following error:  Error: 0x207 SDK_FILE_NOT_FOUND File does not exist.

A:Thunderbolt Firmware update on T580 not working - SDK FILE NOT FOUND

Please do these steps:
1.  open a command prompt as administrator
2.  cd \fw\win\thunderbolt
3.  detect.exe
4.  post screenshot of the output here.  It should look something like this.
 

Read other 1 answers
RELEVANCY SCORE 72

Hello Lenovo friends! I've been a huge fan of ThinkPads-- my first was a T400s back in 2009.  And I've definitely found them to be solid, reliable machines.  I purchased a ThinkPad X1E last November and just encountered a new problem today though-- when I use my TB dock and play video, I've been getting BSOD messages.  I've connected the dock to two monitors, one via DP and the other via HDMI.  The Stop code is "DRIVER_VERIFIER_DMA_VIOLATION." I've read online that to fix this BSOD, you simply download and install the latest TB firmware update.  So I tried doing that today. But when I go to install the firmware update, I'm getting conflicting instructions!  The first dialog box says, "Please do not plug the Type C or Thunderbolt device to your system while updating the Thunderbolt Firmware." The second dialog box instructs, "Please connect at least one Thunderbolt device to your PC..." What is the correct step to do?  I only have one Thunderbolt device and that's my dock.  Should I connect it to my X1E while I'm updating the TB firmware?  Or not?  I've read on other forum posts that other X1E owners have actually bricked their docks when performing TB updates so I'm very concerned about that too.  Can someone please advise?  Thank you! PS.  Here are some of my system details too, btw, in case that helps:My Product #:  20MFCTO1WWMy BIOS version:  N2EET37W 1.1... Read more

Read other answers
RELEVANCY SCORE 71.2

Am running a T470s with a Gigabyte eGPU. Been working fine until I upgraded to the latest BIOS 1.31 the other day, and now it no longer works. The small fain of the eGPU will spin up but the main unit itself (main fan, lights, etc.) will not spin up at all.Thus far I have...1. Checked BIOS settings (No Security)2. Installed/reinstalled Thunderbolt software & firmware3. Downgraded BIOS to the last two versions and back4. Tested eGPU with work laptop & it functions as expectedI'm running Windows 10 but I believe that the issue is unrelated to Windows 10. The reason is, is that beforehand, when the laptop first boots and is still in the BIOS phase, the eGPU used to fire up immediately (lights & main fan). But I cannot even get that, which tells me the issue is not Windows 10 related.Any other suggestions before I go open a support ticket with Lenovo? I'm still under warranty at least.

Read other answers
RELEVANCY SCORE 70.8

Here is the new Thunderbolt Firmware ......CHANGES IN THIS RELEASE
Version 17.0.0.3-N1NTF21W

[Important updates]
Nothing.

[New functions or enhancements]
- Improved firmware stability.

[Problem fixes]
Nothing. https://pcsupport.lenovo.com/de/de/products/LAPTOPS-AND-NETBOOKS/THINKPAD-X-SERIES-LAPTOPS/THINKPAD-...Best Regards

Read other answers
RELEVANCY SCORE 70.4

Because I didn't liked USB 3.0 ethernet chipsets and USB-based ethernet cannot bear some network-intensive tasks, I wanted to use PCIe-based Thunderbolt ethernet controller on my XPS 15 9550. As there is no Thunderbolt 3 "PCIe" ethernet adapter (except docks), I chose to buy Apple Thunderbolt 3 to 2 adapter and Thunderbolt 2-based ethernet adapter.
I plugged it into the XPS 15 9550 (tested with BIOS 1.1.19, 1.2.14, 1.2.16 and latest Thunderbolt firmware with NVM version 16), and the PCIe device did not pop up. Instead, only USB billboard device is appearing saying that "Alternate Mode configuration not attempted". Both Windows 10 and Ubuntu 16.10 failed to detect the device. I moved this configuration to MSI GS63 laptop, and it detected ethernet controller successfully (that laptop utilizing NVM firmware version 18).
It seems that other vendors are affected with lower NVM firmware version involving setup with Thunderbolt adapter: see the case of Lenovo too. Do you have planned Thunderbolt NVM firmware update for XPS 15 9550? Looks like XPS 13 9360 is using newer Thunderbolt NVM firmware version, though.

Read other answers
RELEVANCY SCORE 70

HP DL380z Gen 9 Virtual Workstation Driver Disk (Eastern European, International) 1.00 A 15 Dec 2014 has the following download link: https://h20565.www2.hp.com/hpsc/swd/public/license?eulaType=inline&destinationUrl=687474703A2F2F7777... However, after accepting the agreement, 797445-b21.iso gradually downloads. After 100% of the file has downloaded, the download aborts with "network error." The file is not available on disk. This has been consistent over 2 browsers and 2 computers, whether or not I am logged in to HP Support. Can I obtain this file and/or the drivers in it? Thank you in advance. 

Read other answers
RELEVANCY SCORE 69.2

I have a 4-year-old D-Link DIR 601 (cheap) router. It used to put out a little better than 42% (~38Mbps) of the speed I get hard-wired (92Mbps). Last week, that was cut exactly in half (19Mbps) after I made a few changes to the configuration which should have had nothing to do with the speed it delivers.

Questions:
Is there anything I can check in the router's config that might account for the drop in speed?
The firmware is 1.01 and I understand 1.04 is available, but the site asks if I have model A or B. I can find nothing on the labels about A or B. Where would I find that?
I tried downloading the 1.04 update for version A. It's a zipped .bin file which is not executable. How does one apply the update to the router?
The router has a reset button that resets it to factory settings. Could that solve the speed problem, or is it not worth trying?

 

A:Solved: Update firmware D-Link DIR 601

Read other 6 answers
RELEVANCY SCORE 68.4

I would like to update a D-link DIR-655 router firmware
I downloaded an update that is a zip file that contains
a single *,bin file. How do I update this router with this
file? I would like to also install program called sharepoint
so I can share drive on a USB port that is on that router.
Any suggestions on how to update this router and use
a put a network drive on a USB on this router? First I need to
know how to use the bin file.
Thank you,
 

A:Update D-Link DIR-655 Router firmware w/bin file

Read other 6 answers
RELEVANCY SCORE 68.4

Hi techs!
I'm looking to update my firmware and I find that the D-link India, link to firmware update is not working, hence require a copy of the firmware zip file, If someone can share.

hardware version: C1
 

Read other answers
RELEVANCY SCORE 66.8

Google showed the official F-secure website as the first result, the download link there is broken. doesn't work despite trying dozens of times. Softpedia's link is no different. and even the one listed here on bleepingcomputer leads to a broken link without any kind of download. Can someone provide a working link?

A:F-secure removal tool broken link on all download websites

I think something is wrong with your browser - the link on BC works for me.

Read other 5 answers
RELEVANCY SCORE 66

Please provide a link where I can report by email or web form when your sites are broken.  Taking me to a 'helpful' menu that only allows me to report problem where i can't figure out how to install windows 10 doesn't count...

https://www.microsoft.com/en-us/download/details.aspx?id=48595

<fieldset>
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
</fieldset>







We are sorry, the page you requested cannot be found.
The URL may be misspelled or the page you're looking for is no longer available.

See search results below


T

Read other answers
RELEVANCY SCORE 65.6

Hi, Need help where to download the latest firmware update for CD/DVD burner for my lenovo G470? Everytime i burn with my DVD a message box always pops up saying "The disc wasn't burn successfully. Make sure that you have the latest firmware for your CD or DVD burner installed, an then try again." Thanks,Jeff 

Read other answers
RELEVANCY SCORE 65.6

Attempting to use the download link for the Deploy Latitude E6440 Windows 10 Driver Pack results in an error. The same error appears using both IE 11 as well as Chrome 48. The error text is so large that it crashes the browser when I try to paste it in, but here is the first few lines from the Chrome version. I've attached the full version to this post.

This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Catalog xmlns:xsi="www.w3.org/.../XMLSchema-instance" xsi:noNamespaceSchemaLocation="driverarchivemanifest.xsd" CreateDate="2016-02-05T05:42:58.5468456Z" ReleaseID="MKYJX_X02-00" Version="A01" Application="Dell CAB Builder" ApplicationVersion="4.2">
<System LOB="Latitude" Model="E6440" SystemID="05BD">
<OS Name="Windows10" Arch="x86" MajorVersion="10" MinorVersion="0" Type="win10">
<Release ReleaseID="GM46H_A00-00" ReleaseType="Driver" Category="network" DeviceDescription="Intel 6235 WiFi Driver" DellVersion="A00" VendorVersion="15.4.1.1">
Can someone please address this page? It is holding up my deployment of my company's Windows 10 test group.

A:Deploy Latitude E6440 Windows 10 Driver Pack Download Link Broken

 Mdamon808
Thank you for bringing this to our attention. I send the link to the drivers and downloads team for them to resolve and fix the download. Hopefully, they will get it fixed soon.
For me to better assist in troubleshooting, please click my DELL-Jesse L send me a Private Message with the Dell Service Tag number and your Dell Order number.

Read other 2 answers
RELEVANCY SCORE 62.8

I used the Lenovo System Update (v5.07.0074) and was prompted to download and install (was listed as Critical Update) the Firmware to my Dock.  As always, I closed all applications and sat as the Firmware downloaded. I got the expected prompt to ensure I was plugged in. I then watched as the upgraded prompted me to install. Installation completed and everything appeared to be fine.  I powered down the thinkpad and disconnected. Worked from the living room, then went back to the dock. Connected, and noticed that before I connected the White light on the power button was illuminated. Shrugged, and pushed the power button. Nothing. I un-plugged the Dock, got a cup of coffee, returned and plugged it back in. Nothing. I then noticed that none of the pass-through power was working on the dock.  So, I unplugged it again.  Unplugged everything connected to it, and held the power button down for 15 seconds in an effort. All of this at the recommendation of Lenovo Support. Who, by the way, was very nice and well spoken. Nothing we did worked. I happened to have another Thunderbolt 3 cable in my bag, and no change. I powered up my new X1 Yoga, and connected the cable. No power. This wasn't passing power at all. I confirmed the Intel Thunderbolt app was running, and confirmed that Windows was not even detecting the Dock.  Lenovo is sending me a replacement. I had this one all of a week. Did I miss any other steps while I wait for it to be repl... Read more

Read other answers