Over 1 million tech questions and answers.

bluescreen-startup repair error broke

Q: bluescreen-startup repair error broke

I downloaded a program called "iinet usage analyser" v2.3 went 'i agree to allow this program to make changes to my computer" and it blue screened. When it restarted, I can't start it in safe mode. I tried start-up system repair and I get the following details:

Problem event name: startupRepair Offline
Problem signature 1. 6.1.7600.16385
Problem signature 2. 6.1.7600.16385
Problem signature 3 unknown
Problem signature 4 21200462
Problem signature 5 autofailure
Problem signature 6 13
Problem signature 7 0x109
OS Version 6.1.7600.2.0.0.256.1
Locale ID 1033

I would normally system restore to an earlier point, I have tried this multiple times, but isn't working even to a point about 2 weeks before when it happened. Which suggests to me it really broke something...
Do I have to system restore to factory settings? (i don't really want to do this - re load all programs etc.)

Any recommendations are helpful.
thanks

RELEVANCY SCORE 200
Preferred Solution: bluescreen-startup repair error broke

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: bluescreen-startup repair error broke

Note:
OS windows 7 x64

Read other 3 answers
RELEVANCY SCORE 72.4

Hi everybody
I recently cloned an SSD with Windows 7 Pro on from an HP EliteBook to an SSD from the same brand and the same size.

Edit; The cloned SSD is being used in a HP ProBook

When booting the cloned SSD, I'm getting a BSOD. I used the repair disk to perform a startup repair. When done I got the following message;
problem details:
Problem signature
Problem Event name : StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
Problem signature 04 : 21199729
Problem signature 05 : External media
Problem signature 06 : 6
Problem signature 07 : BadDriver
OS Version : 6.1.7600.200.256.1
Locale ID : 1033
Other things I've done and did not show any results;

sfc /scannowchkdsk
Is there anything else I can do, since I really want to avoid a fresh install (A lot of personal configurations on the employees' device)
Thanks in advance

Read other answers
RELEVANCY SCORE 69.6

Hi There,

I'm inquiring on behalf of my flatmate, who is entirely clueless about computers. Her laptop, a Toshiba Satellite Pro of an unknown spec, somehow became infected with a ransom-ware program called Vista Total Security. I told her I'd take a look and, after stopping the process (the first stage of a guide I found) the computer restarted itself, and never came back up fully.

I tried to enter Safe mode, but the computer reset itself. It suggested I try Startup Repair, but this only took me to a VGA screen with an alert window saying "The installed program cannot start, click OK to turn off the computer". Sure enough, clicking OK turns off the computer.

I'm able to open the F8 menu to try and enter safe mode, but all of those options simply flash up a BSOD with the message:
A Problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Disable or uninstall any anti-virus, disk defragmentation, or backup utilities. Check your hard drive configuration and check for any update ddrivers. run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Technical Information:

*** STOP: 0x000000024 (0x00190444,0x86D87B10,0xC0000102,0x00000000)Click to expand...

Now, here I'm a little stuck. If it were my own computer, I'd reinstall widows or repair... Read more

A:Vista Total Security 2011 - Broke Startup Repair

I was able to use a Linux Live CD (good old Knoppix, seems to have started doing text to speech the whole time though... Weird.) to have a look on my flatmate's machine.

The files are all there, which is good, there are also two partitions. One labeled Vista, the other labeled Data. There's some stuff on the (largely empty) data disk that looks like recovery stuff, but I don't know how to boot this, or is this what windows tries to do if I select the "Repair" option at the F8 prompt?

In any case, I cleared some space on one of my external drives and copied her files onto it just in case.

I spoke to her, her main concern is that she's very busy and doesn't have the time to reinstall everything at the moment. Also, if we're unable to get the recovery to work, she has no installation disk so she'd need to buy a new copy of windows. I'm thinking of taking it back to where she bought it, but she's lost the receipt so she'd have a lot of trouble trying to get them to help her for free.
 

Read other 1 answers
RELEVANCY SCORE 65.6

Hello all, not sure where to post this, as it may be related to my motherboard, but here goes!

I am having huge problems with my computer. It was working just fine two days ago, I havn't changed any settings or hardware. Now it won't boot Windows 7, it only gets to "Starting Windows" and gets stuck, the hard disk stops spinning, a bluescreen flashes and then the computer reboots. I've also noticed the keyboard and mouse are dead at moments during this procedure. Next time it boots it tries to run Startup repair but fails and restarts, with error 0x0 at every step, and this becomes an endless loop. Also after BIOS post it says Marvell bla bla Adapter 1 Disk not found, but both SATA disks are found in BIOS. Not sure if this is related however.

What I have tried so far:
Removing memory sticks, putting them in different ports
Removing all unnecessary cards, DVD drives and USB devices, and hard disks
Removing the motherboard battery
Switching SATA ports
Changing SATA cables
Changing hard disk mode from IDE to AHCI
Tried starting in fail safe mode (same thing, crashes during file loading)

My rig:
Windows 7 64 bit, Gainward GTX 470 1280 mb, 4 GB 1066 Mhz Corsair Dominator, Asus P5Q-E, Intel Core 2 Duo E8500, Creative XtremeMusic X-fi, 700W CoolerMaster SilentPro, Fractal Design R3, 250 + 500 GB WD SATAII.

Before this happened I would occasionally also have problems with the USB units not lighting up, monitor giving "no signal" and Windows not ... Read more

A:Windows won't boot, crashes, bluescreen, startup repair fails

Run HDD Diagnostics - http://www.techsupportforum.com/2828431-post7.html

Read other 4 answers
RELEVANCY SCORE 59.6

Hello Seven Community,

I have a more or less typical problem. A Netbook of my GFriend Lenovo u160 has the 0x000000ED Bluescreen Error after loading Windows 7. It starts after the Windows 7 Loading Screen.
So I tried the intern Windows Repair Function, but after the loading screen.... nothing, not even a blue screen, just black for like ever.

So I took another Windows 7 Pc and made a Windows Repair Disk, as recommended.
The Lenovo u160 has no Disk Drive, so I took an extern one to boot the PC with the disk. Changed the Boot priority in the BIOS Menu and it worked, allmost.
It started all well, the setup started, you could choose a language and the next step was Install, Repair Tool and Windows Informations.

I choosed Repair Tool of course, but that was it. There was no next Step, just the Basic Windows Background. I thought, maybe it would take some time so I left it so for the night and next morning nothing happened. I restarted and choose Install, nothing happened. No way to start the pc and the disk seems not to work.

I have no Idea what to do now, do you have any solutions? And no I don't know which of the Win7 the Netbook ist Operating.

Read other answers
RELEVANCY SCORE 58.8

I apologise in advance for the very long post but I want to be sure you're fully informed of everything I've tried! I have tried looking my problem up on other threads here, but I couldn't find one where their problem was quite as extensive as mine. I tried all the advice found in those threads, and my problem persists.

Laptop: Dell Inspiron 1545
OS: Windows 7

For the last week or two, each time I turned on my laptop it would freeze up completely a couple of minutes after startup. I'd try turning off any none necessary startup programs to see if it made a difference but if happened every time. I couldn't shut it down or anything, because the computer would not respond. The only way to fix it was to turn it off via the power button and restart it. On restart everything would run smoothly, but the problem would happen again whenever I turned it on for the first time after being switched off for a bit.

Like I said, this problem occurred for two or three weeks, and then yesterday when I tried to turn it on it gave me the option to do a startup repair or start Windows normally. Neither works, and now my laptop will not start up at all.

Startup repair goes to the "Loading Windows Files" screen, taking a VERY long time before loading the screen with the Windows Login background with a moveable cursor but then stays there indefinitely (Image 1). The Start Windows Normally option gives me a bluescreen with UNMOUNTABLE_BOOT_VOLUME error and then ... Read more

A:Startup Troubles - Bluescreen, HDD error?

I would say it is the Hard drive failing......
 

Read other 2 answers
RELEVANCY SCORE 58.8

When i try to start up I get this message , Then i also get this one if i retry It does the same if a try to boot in safe mode .Any suggestions on how to address this issue?

A:bluescreen on startup, with error message

When you bring up the advanced boot menu, have you tried booting from the "last known good configuration"?

Read other 5 answers
RELEVANCY SCORE 58.4

Hi guys I was cleaning my laptop turned it on and it just wouldn't work so I turned it off and on again and it was giving me this error code saying my keyboard is not detected in start up. It then says there was a problem and shoots me to startup repair where it's just stuck not doing anything. My mouse and keyboard don't work, but I have a wireless mouse that I can use I can't access safe mode either because my keyboard doesn't work and I don't know if I can get a keyboard hooked up since my computer might not be able to recognize it. Sorry for the badly worded paragraph it's really late and I need to go to sleep. How can I solve this problem. Also startup time is really long ( usually 20 seconds) is now 5 min an doesn't even start up some times and I have no recovery disks or anything like that so im really confused what to do
Edit: A quick update, I started my computer in the morning and was not getting error 01010003, and my computer started perfectly fine however my keyboard still isn't working. I think it might be a driver problem, but I can't access Safe Mode... because my keyboard doesn't work. Is the only way of getting the key board to work getting a new keyboard and using that to diagnose the problem through safe mode or?

A:Error 0101003 Keyboard no detected, stuck on startup/startup repair

In this situation, you have to use another keyboard in order to test. I wish you will be luckier than me .... for me it turned out to be a motherboard failure My computer was working normally .... but no USB/PS2 ports were working.

Read other 1 answers
RELEVANCY SCORE 58.4

As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze; admittedly I slammed the heels of my hands down on the laptop at that point. The site unfroze after less than 30 seconds, I continued using my laptop without incident, then let it hibernate for about an hour. Started up fine after that, and at that point I was beginning to rip a DVD (one that I owned; I just wanted the files on my computer) using a program that I've used successfully in the past, but the rip failed. So I began using VLC instead, and hadn't actually started ripping any files when my laptop froze. I had been trying to point to a file path for saving but hadn't saved anything. The laptop was completely unresponsive after several minutes, so I hit the power key to restart, which is when I got the BSOD. It flashed too quickly for me to read or remember anything other than the word KERNEL. I've been wracking my brain trying to remember if it said kernel error or kernel memory error or what.

After the BSOD I had the option to start normally or in startup repair; I hit "start windows normally" but it went to repair anyway. It was on the grey screen with the cursor but I thought it had frozen again, so I did another hard restart. No BSOD this time, but again the opti... Read more

A:BSOD on startup, unknown error, startup repair running too long

Bump...how can I tell if the startup repair is working?

Read other 2 answers
RELEVANCY SCORE 58.4

My laptop hasn't been in use for about a few weeks and all of a sudden, I am getting a Windows Error Recovery on Startup. I am given two options: Launch Startup Repair (recommended) and Start Windows Normally. Nothing happens when I try to restart Windows normally -- I only see a black screen. Upon selecting System Recovery, a teal screen pops up with "System Recovery Options" telling me to select a keyboard layout. Then it tells me to select my OS, but it comes up blank, telling me to load drivers for my hard disks. I stopped right there.

I am a little hesitant about using the System Recovery in fear of losing important files. If this is a possibility, I may try to backup my files using an alternate OS, like Ubuntu. Or are my files already long gone? Is this just a restore for important Windows files or a complete restore of Windows back to factory settings?

I have not installed any new software or devices. Running Windows Vista x64.

A:Windows Startup Error - System Recovery Launch Startup Repair

Definitely try to backup your files before doing anything else.

Read other 2 answers
RELEVANCY SCORE 58

Error -STOP: 0x0000007B upon startup of ASUS Q550LF laptop. Unable to boot--keep getting error. Have tried Startup Repair with Windows 7 bootable flash drive-which did not fix problem.

I had this hard drive in a Lenovo working just fine, so I got some software and uninstalled most of the drivers since I was moving THAT hard drive (with operating system on it) over to an ASUS Q550LF laptop. I did not want Lenovo drivers on the ASUS. So I installed the hard drive in the Asus and it started up a few times and then I started getting the error. Any idea how to fix the issue?

A:Bluescreen Error STOP: 0x0000007B on startup

Stop ox7B is INACCESSIBLE_BOOT_DEVICE. That means the system cannot get access to the disc to boot from. The usual causes areThe Hard drive itself
Improper boot sequence
Boot virus, bootkit.
What you need to do are .... ► Test the HDD using Seatools for DOS.

► Scan the system for possible virus infection with Windows Defender Offline

► Do you have access to another computer right now? If so, download Partition wizard Bootable CD (the last one in the link). Burn it in a blank CD or in a USB flash stick.

Boot into Partition Wizards GUI following this instructions. When you are on the last screen, take a camera snap of the screen and upload the snap here.
Screenshots and Files - Upload and Post in Seven Forums

We need to see the partitions and parameters.
Let us know the results.

** If you dont want to take all those hassles, you may opt for a Clean Renstall.

Read other 1 answers
RELEVANCY SCORE 56.4

I am using my cellphone because my computer is stuck in startup repair mode. I have windows vista.I can choose repair or normal, both run start up repair. It always fails after multiple attempts. I chose advanced options after failures and tried to do a hard drive restore to several different dates. It always says its successful and restarts, but goes into startup repair again every time. I have called ms tech support, and not surprisingly my problem requires advanced help that costs money. They did have me restart and push f8 to launch safe mode, but it ended up in startup repair also. I have agreed to pay them but set up an appt for next tues. They said i can cancel and get my money back if i want. They said my problem is fixable and my photos and files will be there. I just feel like i may have a better option and I'm hoping this website is it. I can restart my computer and give the details if its needed. I am desperately seeking your help and would definitely donate if you can fix my computer and i dont have to pay ms. I am not a computer idiot, but definitely NO expert.
 

A:stuck in startup repair, vista startup repair, repair failures

Hi, check the following link.
http://support.microsoft.com/kb/927392/en-gb
Boot from the Vista DVD
Follow the link above to reach - Command Prompt.
At Command Prompt - Type.
bootrec.exe
Press Enter.
It will now give you some options.
Type
bootrec /fixmbr
Press Enter.
Let it finish fixing the Master Boot Record.
Type Exit and exit Command Prompt [remove the DVD] and restart you pc.

If the above does not work - use the DVD and back to Command Prompt.
Type
bootrec /fixboot
Press Enter
Let it finish fixing the boot sector.
Type Exit and exit Command Prompt [remove the DVD] and restart you pc.

I would try and back up any needed data and files first, before you do the above.
How to use Linux live Cd to backup files from a dead Pc
 

Read other 1 answers
RELEVANCY SCORE 55.2

Here's my story:

My sister's PC had been corrupted in lots of unnecessary programs and apps.
I deleted those craps. Windows Action Center then prompts me to update my windows, and I did.
PC restarted and POOF!!!, I am seem to be forever stuck in the Startup Repair Loop.
So I tried System Restore, but it's giving me the error code stated above (error 0x80070003).
I also tried System Image Recovery, and it's not also of help. Also, checking Hardware Options didn't help.
Lastly, I tried the Command Prompt option and it gives me nothing.

So how can I possible fix this error? ((

thanks in advance for those helpful respondents ))

A:Startup Repair Error (Forever Loop) Error Code 0x80070003

Hello Cath, and welcome to Seven Forums.

You might see if the tutorial below may be able to help with this.

Startup Repair Infinite Loop Recovery

Hope this helps,
Shawn

Read other 2 answers
RELEVANCY SCORE 54

Hello everyone,

I?m posting because I?m having an issue with my laptop. It?s a Toshiba with Windows 7.

I used it yesterday with no problems whatsoever, but this morning when I booted it up, I very briefly saw a blue screen with coding, and it continued on. Everything seemed normal until a screen came up that read:

?Windows failed to start. A recent hardware or software change might be the cause.

If Windows files have been damaged or configured incorrectly, Startup Repair can help diagnose and fix the problem. If power was interrupted during startup, choose Start Windows Normally.?

Then it gives me two options:

?Launch Startup Repair (recommended)?

?Start Windows Normally?

If I click on Launch Startup Repair, it gives me nothing but a blank screen, and it stays that way without
actually taking me to startup repair. If I click on Start Windows Normally, it just loops back to the original
screen.

This has happened to me once before, and on that occasion, I used system restore. I have all my major files
backed up in various places, but I would prefer to not to have to reupload and reorganize them all again,
because that?s a total pain. I?ve looked elsewhere online, but all I?ve found are tutorials leading you through
jungles of complex code. I?m not as technologically literate as they come. Disaster results whenever I try to code anything at all. I?m afraid that I?ll just screw it up more. Does anyone know what is happening here, and how I... Read more

A:Startup Repair Error

Why dont you try popping in a windows 7 live cd , boot from it and try to use the repair option from there?

Read other 1 answers
RELEVANCY SCORE 54

I clicked onto StartUp Repair with a Vista Recovery Disk onto a Dell laptop and when it starts up , I have this error that the Boot Managar is not installed. What does that even mean?
 

A:StartUp Repair error

So I assume you didn't use "Startup Repair" built into Windows 7? If not, there is a bootrec.exe tool to troubleshoot booting problems.

http://support.microsoft.com/kb/927392

Let me know if that helps!
 

Read other 2 answers
RELEVANCY SCORE 54

When I run Startup Repair I get the message-
"Start up repair cannot repair this computer automatically"

When I run System Restore I get the message-
"To perform an offline System Restore, you must specify which windows installation you would like to restore..."

A:Startup Repair error

You haven't actually told us just what your problem is and why you've been trying to run those, perhaps if you did someone would be able to help.

Read other 2 answers
RELEVANCY SCORE 54

Hi guys hope you can help me.

I have my friends Acer 5920 Laptop with me running windows vista. It was displaying the blue screen of death at start up, Stop Code 0x0000C1F5. I successfully used Linux systemrescuecd to erase the TxfLog file and enable a system reboot.

Startup Repair then started and has now been hanging for hours and hours with no sign of anything happening. Is there any way of formatting the hard drive and starting again as the vista boot disk hangs on black and even safemode wont start.

Im not hugely knowledgeable on what info you all need so let me know.

Thanks in advance

Mark

A:Startup Repair Error?

You know more than I do - I've never even attempted the fix with the txtlog file.

That being said, backup the stuff that you want to save.
Use KillDisk or DBAN (both free - google for them) to wipe the drive completely.
Then install Windows from the recovery disks
IMMEDIATELY update Vista to SP1 and SP2 (this will, hopefully, avoid the C1F5 error)
If SP1 or SP2 fails, update drivers, then update to SP1 and SP2.

Info that I have on the C1F5 error: http://www.carrona.org/bsodindx.html#0x0000C1F5

Good luck!

Read other 5 answers
RELEVANCY SCORE 54

My computer crashed after downloading a file. Now, whenever I startup the computer, it beings with a Startup Repair automatically. After a few seconds, it says that "Startup Repair cannot repair problem".

The details of the problem that it reports are these:
Problem Signature 1: 6.1.7600.16389
Problem Signature 2: 6.1.7600.16389
Problem Signature 3: unknown
Problem Signature 4: 21200839
Problem Signature 5: Autofailover
Problem Signature 6: 30
Problem Signature 7: CorruptFile
OS version: 6.1.7600.2.0.0.250.1
Locale ID: 1053

We've logged in to System Recovery Options and tried Startup Repair, it doesn't work.

System Restore doesn't work from any checkpoint. The first few times, it displayed an error code, but now it for some reason simply goes through with it, and doesn't end up changing a thing.

Startup repair doesn't work either.

I have windows 7 home premium 32bit.

I want to know how to get onto my computer again. PLease help!

A:Startup Repair error

First try booting into Safe Mode with Networking to install, update and run a full scan with Malwarebytes

If Safe Mode is not working, download, burn to CD or write to flash stick, boot and run a full scan with Microsoft Standalone System Sweeper.

Once the System is clean, boot into System Recovery Options via the F8 menu or disk as shown in tutorial, run Startup Repair repeatedly no matter what it reports. Post back results.

If this fails, try System Restore from Recovery Options list, then if that fails open a Command Line to run SFC -SCANNOW Run in Command Prompt at Boot.

As a last resort boot free Partition Wizard bootable CD to Explore C to see if your files are intact, make sure C or the 100mb System Reserved partition (preferred) is marked Active, then click on HD to highlight it, from Disk tab select Rebuild MBR, Apply. If Windows 7 doesn't start and you restored Active flag, run Startup Repair 3 Separate Times.

If these all fail you can copy out your data using your Windows 7 DVD or Repair CD: Copy & Paste - in Windows Recovery Console or Paragon Rescue CD.
System Repair Disc - Create

Then run Factory Recovery from its partition or disks you made or order from Tech Support, or find a Windows 7 installation DVD to clean reinstall using Product Key on COA sticker: Clean Reinstalling Windows 7

Read other 7 answers
RELEVANCY SCORE 53.6

Hello,

I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a few windows updates.

Upon returning to my computer I noticed that it had been unable to startup and had gone straight into system repair with it being 'unable to repair this computer automatically.' I rebooted several times and noticed that it was not a visible BSOD but as soon as the 'starting windows' icon began to appear it went straight into startup repair. I tried to boot into safe mode, tried to load previous good configuration and all of the other advanced recovery options (including system restore/image and many command prompts).

This is what it shows after being unable to repair automatically:

Problem signature name:Startup repair offline
Problem signature 1: 6.1.7600.16385
Problem signature 2: 6.1.7600.16385
Problem signature 3: unknown
Problem signature 4: 21200552
Problem signature 5: Autofailover
Problem signature 6: 11
Problem signature 7: Corrupt file
(then my O.S. version)
Locale ID: 1033

This diagnostic occurs every single time I run the startup repair. Also, command prompts I have tried using the WindowsRE command prompt and the one found on the 'repair your PC' option on the windows 7 installation disk are:

-All bootrec.exe ( /fixmbr /rebu... Read more

A:Startup repair loop - Can't repair with system restore/repair/commands

Have you tried copying over the backed up reg hives from the regback folder? Follow steps 8 onwards in this tut.

Startup Repair Infinite Loop Recovery

Read other 6 answers
RELEVANCY SCORE 53.6

My daughter has a Toshiba - Windows 7 - when computer is started in comes up with a Startup Repair loop - everything that you try leads you right back to the startup repair. When you f8 it starts the same way - same startup repair error. Any suggestions

A:Startup Repair continual error

All is good - thanks!

Read other 1 answers
RELEVANCY SCORE 53.6

Hello,
I have looked into the startup repair loop problem a bit and have tried the advanced repair option but when it prompts me for a login and password, it only gives the option to log in as "updatususer". I would really appreciate some help with this problem! Thanks in advance.

A:Startup repair loop error

Best :
Control Panel -> Uninstall software -> Uninstall Nvidia Update
:P

Content found at what is the updatususer account in my accounts for my Windows 7 Home - Microsoft Answers

Read other 1 answers
RELEVANCY SCORE 53.6

I ran Start Up Repair through Windows Vista Disk and it says it could not install automatically that the BootMgr is missing.
I tried even fixboot at the command prompt and I tried it again and it said the same error.How can I resolve this?
 

A:Solved: StartUp Repair error

This is usually what I do in that situation; it may work:

Rebuild the BCD store by using the Bootrec.exe tool in the Windows

To do this, follow these steps: - Get your Vista installation DVD and pop it into your drive.
- Then restart your computer.
- Press a key when you are prompted.
- Select a language, a time, a currency, and a keyboard or another input method, and then click Next
- Click Repair your computer
- Click the operating system that you want to repair, and then click Next
- In the System Recovery Options dialog box, click Command Prompt
- Type bootrec /rebuildbcd and then press ENTER

• If Bootrec runs successfully, it will present you with the installation path of a Windows directory. To add the entry to the BCD store, type Yes . A confirmation message appears that indicates the entry was added successfully.

• If Bootrec cannot locate any [COLOR=blue !important][COLOR=blue !important]missing [COLOR=blue !important]Windows[/COLOR][/COLOR][/COLOR] installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (Remember to press ENTER after each command)

bcdedit /export C:\BCD_Backup

ren c:\boot\bcd bcd.old

bootrec /rebuildbcd

- Restart the computer.

---------

Orig. source: http://cyberst0rm.blogspot.com/2007/04/how-to-fix-bootmgr-is-missing-in.html
 

Read other 2 answers
RELEVANCY SCORE 53.6

Hello,
 
I am having Dell XPS Laptop for 18 months with windows 7 home premium 64bit , I'm having a problem with startup-repair,I don't know why,but it's trying to 'repair' my 'problems'. It run several times already  and I can't start windows.After it says that "Startup Repair cannot repair problem".if  I press finnish on the setup ,it shuts down and when I turn it on again,the setup appeares once again,even if I choosed to "Start Windows normally". Even i tried to use safe mode but its not working.i never had nay problm with my laoptop inclast 18 months.
Any help please.

A:Windows 7 startup-repair error..

Hi sat_raj
 
There are several avenues that can pursued but I would start with the following:
 
Try a Fix MBR. To do this, press the F8 key at the Dell Logo on startup, select repair my computer, select your keyboard layout and language, click on your user name and sign in, at the System Recover options, click on command prompt, enter the following bootrec.exe /FixMbr and press Enter. If successful, you should be greeted with the message The operation completed successfully. Then type bootrec.exe /FixBoot and press enter, after this completes restart your computer.
You can also access the System Recovery Options using the Windows Disc, put in the disc, turn on computer, press the F12 key at the Dell logo, select cd/dvd and press enter. This will start the CD, when it comes to the screen to Install Now, do not click on that, but click on Repair my computer, on the left bottom corner to access the System recovery options.
 
Regards............

Read other 12 answers
RELEVANCY SCORE 53.6

Hi
I'm having a problem with startup-repair,I don't know why,but it's trying to 'repair' my 'problems'.
It runned 5 times already,and I can't start windows..After I press finnish on the setup,it shuts down,and when I turn it on again,the setup appeares once again,even if I choosed to "Start Windows normally".
Anyone can help?
What should I do?[without reinstalling windows pls i know that option too,but i'm lazy to reinstall windows then linux too..]
P.S: Linux tells me,that my CPU is misconfigured,and some error with my graph card,but I didn't had any problems b4 with them..
LE: at the end of the scan,it tells me to remove any plugged cameras,mp3players,cellphones etc. , but only my mouse is plugged in USB ..

A:Windows 7 startup-repair error..

Go into the BIOS and make sure the correct boot order is there. Maybe the BIOS isn't detecting the right device to boot from.....that's all I have for you man. Good luck.

Read other 9 answers
RELEVANCY SCORE 53.6

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/557482/startup-repair-offline-problem/ - Hamluis.
 
Interestingly enough, I'm having the exact same problem - same error codes and everything. It gets stuck on the windows logo at start-up and goes into the windows error recovery. I'm thinking we need to update our drivers but I'm not sure how to do that in BIOS.
 
Some extra information - Changed the mobo, cpu and memory.
 
A78M-A mobo, AMD A8-7600 cpu 

A:Startup Repair Error Message

Nevermind, i fixed the issue. Just had to reinstall windows

Read other 2 answers
RELEVANCY SCORE 53.6

Hi guys hope you can help me.

I have my friends Acer 5920 Laptop with me running windows vista. It was displaying the blue screen of death at start up, Stop Code 0x0000C1F5. I successfully used Linux systemrescuecd to erase the TxfLog file and enable a system reboot.

Startup Repair then started and has now been hanging for hours and hours with no sign of anything happening. Is there any way of formatting the hard drive and starting again as the vista boot disk hangs on black and even safemode wont start.

Im not hugely knowledgeable on what info you all need so let me know.

Thanks in advance

Mark
 

A:Vista Startup Repair Error?

Hi Mark,

When the white "Acer" screen comes up at the very start, hold down the Alt key and press F10. You only have about 3 seconds do do that while the white screen is there. That will take you into the Acer eRecovery partition and restore Vista. Be warned it will erase **everything** on the hard drive.

If your friend has data on the hard drive then you need to get that off first. Use a USB drive enclosure and another computer to do that.

Dave
 

Read other 1 answers
RELEVANCY SCORE 53.6

So. It all began when I shut down my computer, since itunes was giving me trouble. It installed an update, and then shut down without a problem. But. When I restarted it, it told me in a strange font, "Windows is loading files..." and then took me to a screen that gave me the option to Launch Startup Repair or Start Windows Normally. Either option brings me to the same message, "Your computer was unable to start. Startup Repair is checking your system for problems..." Which would be fine with me, if it ever left that screen again. But no matter what I try, it never gets past that point. Sometimes it tells me that it cannot be fixed. And then proceeds to do NOTHING. Or, once, it offered to restore my system. Since this is the exact same thing that happened to my last computer, along with a bunch of other stuff that contributed to its eventual demise at the computer repair shop, I have nothing I NEED stored on there, so I said yes. But, that did nothing. Now it's back to the exact same nauseating screen that tells me it's searching for problems. I looked it up on the internet, and found that it has happened to many other people, but no matter where I go, no one seems to have a straight answer as to WHY it happened, or how to fix it. Is it a virus? Is it an error? How, if it's possible, do I get back into my computer? What did I do to cause this? When I either get a new computer, or fix this one, how do I keep it from happening YET AGAIN???
Please... Read more

A:Windows Startup Repair Error

Can you take a picture of the weird font?

What update did it install?

Read other 1 answers
RELEVANCY SCORE 53.6

My laptop is a Gateway with 1Gb RAM. It has had problems for several months where it will just reboot. Now, however, when I try to boot it, the machine displays the screen that says that there is a problem and asks me to start the Startup repair. If I choose this, the repair runs for several minutes, then says, "Startup repair cannot repair this computer automatically."

I had this same problem a few months ago, and took it to a PC repair guy. He didn't even charge me because he said the problem was so simple to fix, it only took him a couple minutes. He told me what he did, but I have forgotten what it was, and I can't get in touch with him again.

Any suggestions on what I can do so as not to lose my data would be greatly appreciated. There is just 1 file on this system that was created last week that I can't afford to lose. Anything else is not critical, but I do need to get this one file.

Thanks, in advance, for the help.

A:Error recovery and startup repair no help

Hi do you have a recovery or install disc to attempt the repair from

Read other 1 answers
RELEVANCY SCORE 53.6

Started getting an error this morning on boot up of Windows 7. Goes into Startup Repair and says it cannot repair the computer automatically. Looking at diagnostics most of the checks completed with a 0x0 error code. Root Cause Found: Startup Repair has tried several times but still cannot determine the cause of the problem. I ran SFC/Scannow and got There is a system repair pending which requires reboot to complete. Upon reboot, I still get the same error. Any suggestions? Thanks in advance for help.
 

Read other answers
RELEVANCY SCORE 53.6

Hi,

Recently I have been unable to start my Toshiba laptop up. When I start the laptop up I am given two options: "Start windows normally" or to "launch start up repair" - niether of the options work and I am forced to turn the power off again. When I choose "Start Windows normally", I am greeted by a blank black screen which shows no signs of changing. If I choose the start up repair it begins to load files and stops for a brief second, then brings me onto a screen which reads the following:

"Windows has encountered a problem communicating with a device connected to your computer.

This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.

If you continue to receive this error message, contact the hardware manufacturer.


Status: Oxc00000e9

Info: An unexpected I/O error has occurred."

As far as I know there is nothing which is occupying the USB drives or the CD-ROM drive, so I'm really confused.

By the way, I'm running Windows Vista.

Any help is appreciated.

A:0xc00000e9 Startup repair error.

Try these free, bootable diagnostics:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Read other 1 answers
RELEVANCY SCORE 52.8

Hey guys,

Yesterday I brought a new modem/router, the Billion 7800N. I hooked it up and everything worked perfectly once setup. I turned my computer off and went out but when I came home and turned it on, it just sat at "Loading Windows".

I've tried all the Startup Repair options, I used Startup Repair, System Restore, Command Prompt, but none of those fixed the problem. Looking like my last resort I went with a format and fresh install of Windows 7 Ultimate x64. Everything went very smooth, so I installed the necessary drivers and basic programs and restarted the computer so that I can make an .img of C: drive. Well the computers starting up, gets to "Loading Windows" and just sits there, just like before.

How can this happen again with basically nothing installed?
Could the Billion modem/router be affecting my computer, causing this error?

A:Startup Repair Error Code: 0x490

Hi,

Are you able to boot in Safe Mode?

If so, open an elevated Command Prompt and type:

sfc /scannow

to test and attempt a repair on your system files.

I use a Billion 7401VGPR3 and don't have this issue, so I think it might be something else. I see a lot of references to this code in relation to the Master Boot Record, but I don't know much about this error.

Perhaps a more experienced memeber might be able to confirm this, and/or offer better advice.

Regards,
Golden

Read other 1 answers
RELEVANCY SCORE 52.8

my laptop crashed two days ago whilst browsing the internet and i had to force a shut down, when i restarted my laptop it gave me two options, one being the startup repair and the other being to start windows normally.

neither work.

the startup repair sends me to a blank blue windows screen and after 2 hours of waiting i abandoned that and attempted to just start windows, which loops me back round to the startup error page.

i have searched for a fix and therefore attempted to boot my laptop in safe mode which loops back round and i have also tried to use the last known good configuration which sends me to a green windows screen and again after hours of waiting nothing is gained.

My last move has been to try and create a repair disk through my friends laptop but after fiddling with the boot order to finally get it to even recognise the disc is doesnt work. i assume its because i made the disc through a windows 8 machine and not a windows 7 one.

Any help would be greatly appreciated, this is super frustrating and i have ran out of ideas

A:startup repair error on samsung np300

Is the HDD detected in BIOS setup? If not try reinstalling it to get it detected. If it won't be then you'll need to either slave it to another PC to test the drive, or replace it.

Otherwise everything possible that can be done is here for Troubleshooting Windows 7 Failure to Start.

Note that repairs work best from disks which are all provided in the tutorial, as well as flash stick alternatives.

Read other 2 answers
RELEVANCY SCORE 52.8

Hi everyone. So I ran a scan with MalwareBytes and it showed some files that it told me to remove, so I did it. Then the next time I turned on my computer it showed an error message that says something about a error in startup, it ran a scan and the results was that it couldn't fix the error. Can anyone help me please? (Sorry if something is not making sense, english is my second language)
 
I'm attaching a file from Farbar Recovery Scan Tool
 FRST.txt   15.58KB
  3 downloads

Read other answers
RELEVANCY SCORE 52.8

Problem signature: 
Problem Event Name: startup repair offline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature  03: unknown 
Problem Signature 04: 622
Problem Signature 05: Autofailover
Problem Signature 06: 1
Problem Signature 07: No root cause
 
My computer freezes and sometimes restarts itself. I got the above error message. Please help!
Thank you so much in advance!
 
 
os version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Read other answers
RELEVANCY SCORE 52.8

Hi this is my fist thread . So my win7 home premium x64 was crashed while playin mw2 game . Then it restarted my pc . When it start up it goes to windows error recovery .there you have two options .
Launch startup repair( recommended)

Start windows normaly . At first i tried the second option and the windows couldnt startup and was restarting over mad over again. Then i chone the first option and then it said : the windows is loading files.... The after two time the loading bar finished th BSOD appered and the technical information was :
Stop : 0x0000007E (0xFFFFFFFFC0000005,0xFFFFF8000F4ECB74,0xFFFFF88002B55968,xFFFFF88002B551C0)


And i tried f8 button to go to boot manager but it goes to windows error recovery again
The i tired to reinstall my windows so i put my windows CD the the same thing happened . Please guys help me !

P.s : i with my mobile phone so i cant upload any pics right now .

A:BSOD startup repair error 0x0000007E

Have you tried a second startup repair? It sometimes takes three tries to fix the problem.

Read other 9 answers
RELEVANCY SCORE 52.8

Hi everyone. So I ran a scan with MalwareBytes and it showed some files that it told me to remove, so I did it. Then the next time I turned on my computer it showed an error message that says something about a error in startup, it ran a scan and the results was that it couldn't fix the error. Can anyone help me please? (Sorry if something is not making sense, english is my second language) I'm attaching a file from Farbar Recovery Scan Tool
 FRST.txt   15.58KB
  6 downloadsScan result of Farbar Recovery Scan Tool (FRST) (x64) Version: 23-11-2016Ran by SYSTEM on MININT-1E4NB1E (24-11-2016 13:56:21)Running from E:\Platform: Windows 7 Ultimate Service Pack 1 (X64) Language: English (United States)Internet Explorer Version 11Boot Mode: RecoveryDefault: ControlSet001ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/==================== Registry (Whitelisted) ====================(If an entry is included in the fixlist, the registry item will be restored to default or removed. The file will not be moved.)HKLM\...\Run: [NvBackend] => C:\Program Files (x86)\NVIDIA Corporation\Update Core\NvBackend.exe [2685072 2015-05-01] (NVIDIA Corporation)HKLM\...\Run: [ShadowPlay] => C:\Windows\system32\rundll32.exe C:\Windows\system32\nvspcap64.dll,ShadowPlayOnSyst... Read more

A:Windows 7 startup repair couldn't fix error

Greetings danielma1992 and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.If you would allow me to call you by your first name I would prefer to do that.===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met.Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter prob... Read more

Read other 1 answers
RELEVANCY SCORE 52.8

Hello, my computer has been working flawlessly for the past year and has had no problems at all working currently with windows 7. Until two days ago when i was just browsing the internet and my computer froze and the whole screen tinted pink. I tried moving the mouse, typing in letters, but it was frozen. I was forced to power button to get the computer to shut off because i was unable to do anything. Upon restarting my computer it asked me if i wanted to run windows normally or use safe mode, so i run it normally and then on the load screen where you see the windows 7 logo it freezes every time. The computer stays frozen for about 10 minutes and then it restarts itself and comes up with the Startup Repair program only to say that windows cannot repair this computer automatically. Here is the problem details.

Problem event name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200535
Problem Signature 05:AutoFailover
Problem Signature 06: 10
Problem Signature 07: NoRootCause
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Its been this way for a couple of days now and im not sure what to do

i have tried to run the system restore through the startup repair program and that hasnt worked im not quite sure how to get my computer running again but any help would be greatly appreciated as i am one who uses my computer quite a bit ^.^

One last thing i forgot to leave in ... Read more

A:windows 7 startup repair offline error

I'm guessing replace your hard drive

Read other 4 answers
RELEVANCY SCORE 52.8

I have seen many postings about this virus and no one other than USASMA has been able to give a helping hand. The way it started was a window opened while i was in IE and asked if i would like to allow (something) to run...I assumed it was java or something and clicked allow...2 sec later a blue screen of death is in front of me for a brief second and it resarts....every time it restarts it is the same thing...loading windows files...then a green loading bar above the word windows...it then brings me to the Start up repair and recovery and the same message comes up...Start up repair could not repair windows....I have tried everything from Image recovery to system restore and they do not work...I have run both a hard drive diagnostic and a mem test provided by USASMA and they say everything is 100%....i am not sure if i have the Win 7 disk...the laptop is a year old sony vaio and I actually have this problem on another laptop and have had no success....any help is really appreciated!!!

A:Startup Repair Offline system error

Hello and welcome to the forums :)

Have you tried to boot the computer in safe mode?

If you can boot it in safe mode, you could run a virus removal software, if you get it running again, may I suggest Microsoft Security Essentials?

Best of luck,
Marco.P

Read other 4 answers
RELEVANCY SCORE 52.8

Hi,

A few days ago I was going to put in a new HDD and I accidentally tore the HDD connector in two pieces trying to get it out... Is it possible to put it back together?

The laptop is really old (but works surprisingly well with Xubuntu) so if I can't repair the connector, I might as well throw it away because the lowest price I've found for a new connector is $70, which is just too much to spend on such an old laptop.

The laptop is Toshiba Tecra 550CDT.

The connector broke about where the black line is drawn.
Thanks.
 

A:Accidentally broke my laptop's HDD connector. Is it possible to repair it?

I seriously doubt it. I can't even think of how to start a repair on a film connector like that.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Hi, this is my first thread post. This morning my laptop worked fine and I was browsing around the net when my desktop decided that it was high time it froze. So I did a hard reset as I have done many times before on many different computers. Only when I rebooted, my system shut itself down immediately after the first boot up screen.

Eventually (miraculously), after around 10 hard resets, it got past that screen to the windows logo screen, and got stuck for around 10min there, and then got through to the login screen. When I log in, I get a blank screen with only my cursor showing up. I read around that you can display the desktop again by ending the explorer.exe process and restarting it in the task manager, which unfortunately didn't work for me. Rebooting again does exactly the same, and when I open up the repair screen by pressing F8, only safe mode seems to actually load anything (so I guess there's not too much wrong with my harddrive since I can access everything through safe mode).

Both startup repair and Safe Mode with Networking give me exactly the same error:

"Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains errors.
File: \Windows\system32\winload.efi
Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer" ... Read more

A:winload.efi missing or corrupt error when trying to use startup repair

I?ve got the same issue, done same manouvers as copied below:


Error
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains errors.
File: \Windows\system32\winload.efi
Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer

Press Enter to try again
Press F8 for Startup Settings

Attempted fixes

1 - Press F8

Screen flashes quickly but nothing else happens
2 - Reboot computer with installation media (USB 3 stick)
Computer failed to get past POST check
Moved USB stick to another port and booted from it and followed this procedure:
Automatic System Repair - Didn't work
System Restore - Didn't work
BootRec /RebuildBCD, BootRec /FixBoot, BootRec /FixMBR - No difference here either
Refresh PC from repair DVD - "An error ocurred while refreshing your PC, no changes were made"

Ran diskpart etc:

Volume 0 - Ltr D - label *none* - Fs *none* - type DVD-ROM
Volume 1 - Ltr C - Label *none - Fs RAW - type Partition - Size 217GB - status healthy - info none
Volume 2 - Ltr * - Label *none - Fs RAW - Type Partition - Size 100MB - Status Healthy - info hidden
Volume 3 - Ltr * - Label *none - Fs RAW - Type Patrition - Size 900MB - Status Healthy - info hidden
Volume 4 - Ltr * - Label *none - FS RAW - Type Partition - Size 20GB - Status Healthy -... Read more

Read other 1 answers
RELEVANCY SCORE 52.4

I am stuck in a start-up repair error loop and i need to find a way to fix this. I also read that Farbar works but needs new coding for each computer since they have different problems to fix.I also need help in removing the virus after the start-up error is fixed Thanks for anyone that helps

A:Startup Repair Error after trying to remove alureon.gen A virus

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.   Scan with FRST (Recovery Environment)To run FRST on Vista and Windows7:For x32 (x86) bit systems download Farbar Recovery Scan Tool and save it to a flash drive.For x64 bit systems download Farbar Recovery Scan Tool x64 and save it to a flash drive.Plug the flashdrive into the in... Read more

Read other 2 answers
RELEVANCY SCORE 52.4

I am stuck in a start-up repair error loop and i need to find a way to fix this. I also read that Farbar works but needs new coding for each computer since they have different problems to fix.I also need help in removing the virus after the start-up error is fixed Thanks for anyone that helps

A:Startup Repair Error after trying to remove alureon.gen A virus

Please repost this here with a FRST log if possible.Virus, Trojan, Spyware, and Malware Removal LogsRun in Normal modePlease download Farbar Recovery Scan Tool and save it to your Desktop.Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.Right click to run as administrator (XP users click run after receipt of Windows Security Warning - Open File). When the tool opens click Yes to disclaimer.Press Scan button.It will produce a log called FRST.txt in the same directory the tool is run from.Please copy and paste log back here.The first time the tool is run it generates another log (Addition.txt - also located in the same directory as FRST.exe/FRST64.exe). Please also paste that along with the FRST.txt into your reply.

Read other 1 answers
RELEVANCY SCORE 52.4

Hey guys, i am running windows 7 home premium 64 bit on my core i3 lennovo laptop
Problem is that i have been running a 2nd monitor and about a month ago the laptop screen went crazy and stopped working but the monitor kept working so i just went along with that. All has been fine but 2 days ago a tried to log in and the computer froze so i manually restarted it to find the startup repair come up, it did its thing, restarted a few times over a day and then it said that the problem could not be repaired, i tried it again and the same thing happened.

I saw the infinite loop tutorial so i tried it and got to the final stages and it said that the action could bot be performed because of an i/o error.
I searched around and saw that people have used chkdisk And sfc scannow. I tried these but kep geting the same messge about the i/o error.

All of my work is on this HDD so could someone please reccomend a way to fix this or save my HDD from having all of its contents deleted

Thanks.

A:Startup Repair not working, I/O error message in cmd prompt

Forgot to add that safe mode wont work either, just comes up with startup repair again

Read other 1 answers
RELEVANCY SCORE 52.4

Hi guys.

I'm new to this forum and I ask you for help.

Yesterday I repartitioned my 1TB HDD, because there was almost no space on C:. I tried to clean it with programs such as CCleaner or so, even manually (for ex. Temp folder) but it was still so little space that I decided to make C: partition bigger. So I downloaded EASEUS Partition Manager (more or less this was the name of the program) and shrunk my E: partition form approx. 912GB to 850GB. I also moved the whole data on this partition (I just used the slider in this program - I slided it max. to the right) and then chose an option to enlarge my C: partition. I didn't slide anything here, I just stretched the slider to the right so that C: got bigger by 50GB, so now it is approx. 100GB and there is 50GB of free space.

Then the program asked me to reboot and it performed a repartitioning process. It was completed successfully, BUT Windows just won't startup now. I now always get the message with a 0xc0000225 error if I try to boot it from HDD. So I searched for it up on the Internet and found that it can be repaired with a Startup Repair utility. After several failures to run this utility I finaly managed to run it today, after several hours of battle (it was just the boot order in BIOS) and started it.

I chose the first option (Startup repair) and let it run. It now says it can't solve the problem and if I click a little arrow to show the details of the problem, there is a big text saying:

Problem event na... Read more

A:Startup Repair failure - 0x490 and 0xc0000225 error

in recovery environment enter "command prompt"

BCDEDIT /enum all > bcd.txt
copy bcd.txt to some usb stick. plug stick in working pc and post it

still command prompt:

DIR C:
DIR D:
DIR E:

What is drive letter of windows OS?

Read other 9 answers
RELEVANCY SCORE 52.4

My desktop computer started (out of the blue) acting up with a "windows error recovery" screen on boot up. It gives me the choice to "Launch startup repair" or boot to windows normally. The first option does not fix it. It gives an error code 0x0. It leads to a dialog box that says system recovery options that gives some details and some advanced options, but it tells me it does not recognize my username and password! The second option, to boot to windows, gives me a BSOD. What to do.

A:windows error recovery- startup repair fails to fix

Here is a FRST log: (if that is helpful)

Scan result of Farbar Recovery Scan Tool Version: 22-08-2012 02
Ran by SYSTEM at 22-08-2012 19:05:13
Running from I:\
Windows Vista ™ Home Premium (X64) OS Language: English(US)
The current controlset is ControlSet001

========================== Registry (Whitelisted) =============

HKLM\...\Run: [RtHDVCpl] RAVCpl64.exe [x]
HKLM\...\Run: [Skytel] Skytel.exe [x]
HKLM\...\Run: [LogMeIn GUI] "C:\Program Files (x86)\LogMeIn\x64\LogMeInSystray.exe" [57928 2008-02-28] (LogMeIn, Inc.)
HKLM\...\Run: [LXBSCATS] rundll32 C:\Windows\system32\spool\DRIVERS\x64\3\LXBStime.dll,RunDLLEntry [28672 2007-02-22] ()
HKLM\...\Run: [CanonSolutionMenu] "C:\Program Files (x86)\Canon\SolutionMenu\CNSLMAIN.exe" /logon [644696 2007-05-14] (CANON INC.)
HKLM\...\Run: [WrtMon.exe] C:\Windows\system32\spool\drivers\x64\3\WrtMon.exe [20480 2006-09-20] ()
HKLM\...\Run: [CanonMyPrinter] C:\Program Files\Canon\MyPrinter\BJMyPrt.exe /logon [2782096 2010-07-25] (CANON INC.)
HKLM\...\Run: [AdobeAAMUpdater-1.0] "C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\UWA\UpdaterStartupUtility.exe" [497648 2010-09-16] (Adobe Systems Incorporated)
HKLM\...\Run: [MSC] "C:\Pro... Read more

Read other 5 answers
RELEVANCY SCORE 52.4

I have a desktop running Windows 7 that will not boot into Windows. During bootup, it blue screens and reboots so fast that I cannot read the error message.  Upon trying to do a startup repair, it fails with message
 
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 04: 21200290
Problem Signature 07: BadDriver
OS Version: 6.1.7601.2.1.0.256.1
 
Also, it blue screens when trying to boot into safe mode. I have tried a system restore but that fails. I've also tried copying the backup registry from the RegBak folder. Still no luck.
 
Is it possible to determine what driver is causing the problem and remove it?  I'm trying to avoid a Windows reload since there's no image backup of the computer and some of the software cannot be replaced.
 
Thanks.

A:Windows 7 startup repair fails with BadDriver error

Since you can't boot into Windows normally or in Safe Mode you need to do a Repair Installation.  This will run the Startup Repair from a disc.
 
A Windows 7 Repair Installation will require a installation disc.
 
If you do not have a Windows 7 installation disc you can download a free legal ISO image of Windows 7 SP1 at  Windows 7 Forums.  You will need to download the same version of Windows 7 that you have installed,  This image is hosted by the Digital River store which is an official distribution partner of Microsoft.  This is a genuine untouched image which is safe to download. 
 
Attention:  If you do have a Windows installation disc, skip Part A and go to Part B, Step 1b.
 
Part A, Steps 1a - 6a
 
How to burn ISO image using Windows Burn Disk Image.
 
Notice:  This applies only to Windows 7 and Windows 8, earlier versions do not have this.
 
1.  Place a blank CD or DVD in the tray of your optical drive and close the tray.
 
2.  After you have downloaded the ISO image you want to burn right click on the Start orb, then choose Windows Explorer.
 
3.  When Explorer opens click on Downloads in the left pane.  Scroll down till you find the ISO file you want and double click on it.  Click on Burn Disk Image.
 
4.  In the image below you will see Dick] burner:, this should be set to the optical drive you want to use.  Click on Verify disc after burning... Read more

Read other 14 answers