Over 1 million tech questions and answers.

BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Q: BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
Thanks in advance!

RELEVANCY SCORE 200
Preferred Solution: BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?

Read other 5 answers
RELEVANCY SCORE 264

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 252.8

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

Read other 3 answers
RELEVANCY SCORE 248

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 244

Hi everyone,

I recently have noticed more and more BSODs. I had this problem about 6 months ago and was able to track it down to drivers that came from Daemon tools. I cleared all that out and it fixed the issue. I don't think these new BSODs are related but they might be.

This seems to be happening randomly. It happens roughly every 2 weeks and early in the morning (1am, 6am, 9am, etc.) but not at a consistent time. As far as I can tell, I am not doing anything or leaving open any specific program that triggers this. There doesn't seem to be a consistent pattern.

I ran the DM Log Collector and uploaded the zip file here. Any help would be appreciated. Thanks!

A:BSOD - Happens randomly. "Bad Pool Header", "DRIVER_VERIFIER"

Code:

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Downloads\MUSICMACHINE-Wed_10_22_2014_142816_61\102214-20108-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Machine Name:
Kernel base = 0xfffff800`03013000 PsLoadedModuleList = 0xfffff800`03256670
Debug session time: Wed Oct 22 00:31:30.751 2014 (UTC + 6:00)
System Uptime: 6 days 13:12:26.826
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck... Read more

Read other 9 answers
RELEVANCY SCORE 244

Hey all, I've gotten a couple blue screens over the past couple of days. I just replaced my GTX 660 with a 960 over the past weekend and received a Bad pool header BSOD on the 9th, then today (the 11th) 2 Reference by pointer BSOD's. I've done some research and it seems to all point to driver errors. My brother just got the same GPU and is having a massive amount of blue screens with slightly different errors. Is this an issue with Nvidia?

Thanks for your help! All req'd info should be attached below

A:3 BSOD's after new GPU, "Reference by Pointer" and "BAD POOL HEADER"

Hello, papasmerf767. I will try to help you, but I need you to do something for me.

Please fill out your System Specs




   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.



If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs. Please list the as detailed as possible with Manufacturer and Model number. Also, please include your PSU and CPU Cooler.

You had 2 dump files


Code:
REFERENCE_BY_POINTER (18)
Arguments:
Arg1: fffffa800c7da570, Object type of the object whose reference count is being lowered
Arg2: fffffa8013ccf3a0, Object whose reference count is being lowered
Arg3: 0000000000000001, Reserved
Arg4: 0000001000000000, Reserved
The reference count of an object is illegal for the c... Read more

Read other 3 answers
RELEVANCY SCORE 239.2

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

Read other 4 answers
RELEVANCY SCORE 239.2

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

Read other 1 answers
RELEVANCY SCORE 237.6

Problem:

Everything was running fine until yesterday, when my PC crashed with the BSOD giving me the "IRQL not less or equal" error. I ignored it and carried on- which resulted in the computer crashing with "Memory management" blues whenever I started something that was not the browser (It later started crashing on browser start too).

I first thought it was the temperature - Memtest95 and GPUtemp said otherwise.

So I started testing the RAM (taking one DIMM out) with Memtest86- It passed 4 cycles, so I shut the PC down and put the other DIMM in.

When I turned the PC on again, there was no signal sent to my screen, and none to my keyboard (and the HDD light on the front of the case did not start blinking like usual). The fans were running, so I figured something might be wrong with the DIMMs I put in. I removed the graphics card and plugged the screen into the motherboard.

Now the screen gets a signal, background lighting starts up, and then it shuts down to hibernation again. This repeats itself until the machine is shut down manually.

I got no idea what to do.

System specs: http://pastebin.com/DQwejZLx
I can not post the Minidump folder, since the PC can't start and I did not back it up. Sorry.

Thank you for your help.
 

Read other answers
RELEVANCY SCORE 230

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 227.2

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 220

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

Read other 1 answers
RELEVANCY SCORE 219.6

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

Read other 5 answers
RELEVANCY SCORE 218.8

For the past two days I've been getting BSOD while playing games. This only occurs while a game is open and sometimes the blue screen doesn't even come up, the pc simply restarts and comes up with the pop up like it does when you get a BSOD.

It first occured when I upgraded to windows 10 (from win7), naturally I downgraded to win7 however the usb drivers became corrupt and therefore I had to clean install win7. After doing so the same problem occured giving a BSOD with this in the dump file:
(1st crash ) Imgur: The most awesome images on the Internet
(2nd crash ) Imgur: The most awesome images on the Internet

After seeing this I fresh installed windows again and the problem is still occuring, Ive tried installing older graphic drivers however that made no difference (im currently running the drivers that came on a cd with my pc).

Here are my specs: Imgur: The most awesome images on the Internet
In the attachments is the file produced by SysnativeBSODCollectionApp.

Any suggestions as to the source of the problem or solution greatly appreciated.

A:BSOD causing by "dxgkrn.sys" and "ntoskrnl.exe""

[Update] Because the forum won't allow me to edit the post anymore.
Before the actual "crashing"/BSOD starting I was getting errors saying "The display driver has stopped working and recovered" and "Application X has been blocked from using graphic software". This was all happening while playing cs:go. After a while of restarting csgo and continuing to play for about 5 min before it crashed again it just started restarting or the monitor went blank and the pc stayed on forcing me to hold the power button to restart it.
The BSOD/black screens/restarts mostly happen while playing games however they sometimes occur while browsing or when the computer is simply on without anything (but the antivirus) running.

Read other 1 answers
RELEVANCY SCORE 217.2

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 216.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 215.6

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 215.6

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 215.2

Hi Everyone,

Hoping I can get some insight from you all on this issue.
[*Partlist*](Intel Core i7-6700K, EVGA GeForce GTX 770, Corsair Air 240 - System Build - PCPartPicker)

I have a fresh install of Windows 10 Pro on brand new hardware (literally assembled yesterday). I keep getting either a BSOD (Diablo III gives me a BSOD, so does staying remote desktop-ed into my local server) or Chrome browser crashes. Every single BSOD is the same error stated in the title: "IRQL_NOT_LESS_OR_EQUAL" / "ntoskrnl.exe". As I was typing this post I got one (BSOD) for "Memory Management" - guessing a memory leak or something?

I have already compiled/completed (both attached and linked):
* [PERFMON] (which seems to be abysmal considering my hardware) (https://dl.dropboxusercontent.com/u/...N%20Report.rar)
* [Sysnative](https://dl.dropboxusercontent.com/u/...lectionApp.zip)
* [MemTest] (0 errors both on stock and OC ram - Mobo wants to recognize my ddr43000 as 2133, so I tested both at 2133 and with XMP enabled at 3000 (with adjusted voltage, etc.). Still, after 7 hours, zero mem issues.) (https://dl.dropboxusercontent.com/u/.../MemTest86.log)
* BlueScreenView [*Logs*](https://dl.dropboxusercontent.com/u/...19/report.html)

* Anything else you think you might need as I grab data?

Thoughts So Far:

* Right now I think I have eliminated the bad memory possibility with the memtest results, but not sure that's 100%? 7 hours running and zero erro... Read more

A:BSOD on New Skylake Win 10 Pro Build & "IRQL_NOT_LESS_OR_EQUAL" / "ntoskrnl.exe"

* [Driver Verifier Results](https://dl.dropboxusercontent.com/u/...20verifier.txt)

Read other 1 answers
RELEVANCY SCORE 214.4

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

Read other answers
RELEVANCY SCORE 214

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 214

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 214

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 212

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 211.2

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 211.2

Playing world of tanks I had a BSOD that said "Bad Pool Header" then of course a bunch of stuff that means nothing to me... I have downloaded the SF Diag tool and will attack the zip with my dumps/diag info here...

As a Side note... the BSOD does the memory dump then supposedly "restarts" the computer but mine just sits there on a black screen until I manually hold the power button down to turn it off then turn it back on....

A:BSOD Playing World of Tanks "Bad Pool Header"

Code:
BugCheck 19, {3, d2eaf600, ac212f78, d2eaf600}

*** WARNING: Unable to verify timestamp for avgidsshimx.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsshimx.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+312 )

Code:
Usual causes: Device driver
avgidsshimx.sys seems to be a driver which is causing the crash, and linked to AVG, therefore I suggest uninstalling AVG with the offical installer (see link below)

Uninstall AVG:


Code:
Start Menu\Programs\AVG
Download tools and utilities | AVG UK
Uninstall Spybot - Search & Destroy:


Code:
Start Menu\Programs\Spybot - Search & Destroy
The later editions of AVG have been known to cause some stability issues with Windows 7, furthermore I would suggest uninstalling Spybot, as AVG and Spybot are both real-time protection programs and therefore are clashing with each other and producing crashes.

You can run full scans with MSE and Malwarebytes:Microsoft Security Essentials - Microsoft Windows
Malwarebytes : Free anti-malware download
Remember to install the free version of Malwarebytes not the free trail; untick the free trail box during installation. Microsoft Security Essentails has proven to much more stable and less problematic within Windows 7, than other AV suites available to use. Remember to update the security definitions for both MSE and Malwarebytes before scanning your system.

Uninstall Free Window Registry Repair:


Code:
Start Menu\P... Read more

Read other 9 answers
RELEVANCY SCORE 211.2

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

Read other answers
RELEVANCY SCORE 210.8

Recently had my work laptop upgraded to Windows 7 from XP. Everything worked fine for one week. Then I started getting the BSOD error " Bad pool header". My computer will repeatedly shut down to protect windows. I notified my IT department and they believe that I corrupted the hard drive, as I have local admin rights. they provided me with a loaner computer and loaded my backup system on to this laptop. Worked great for a week and then again started getting " bad pool header and new error "page fault in non paged area. They believe I again corrupted the hard drive. The only software I installed is a program I use for work "Form Max" which other users have been using successfully in Windows 7. I used the DM log and have attached the dump files. Any assistance would be appreciated.

A:BSOD error " Bad pool header and page fault in non paged area"

Just discovered the original attachment was blank This one I checked and it does have files. Would appreciate any help that can be provided.
Thanks.

Read other 1 answers
RELEVANCY SCORE 210.4

Hi, my computer is an HP P7-1245 desktop
Specs : i5 - 2400
8 gb ram
1 tb hdd
randeon hd 7450 video card

So I first bought this computer during march 2012, but it broke down and went in for repairs in july. So I guess this computer is about 2 months old? The problem was today I encountered a BSOD and i saw "Bad pool headeR" as the error. Please help!

A:BSOD "Bad pool header" first encounter when on desktop

Welcome to Seven Forums Willy.

http://www.sevenforums.com/crashes-d...tructions.html

Run a RAM test.

RAM (memory):
This will require memtest on a bootable CD or USB stick.
RAM - Test with Memtest86+

Read other 4 answers
RELEVANCY SCORE 210.4

Hello ,

Since Few Days Im getting BSOD after changing settings of my ATI Mobility Readon HD 5650 graphic card settings to all Maxium Level(using 100% of graphic card).

After getting First BSOD indicating that bad video driver , i uninstalled graphic card driver and again installed to default settings .

Again now it is showing BSOD , this time it is displaying error message as " Bad Pool Header Data " . details as follows :

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000020
BCP2: FFFFFA80017A24D0
BCP3: FFFFFA80017A2B80
BCP4: 00000000046B4E10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\031612-37549-01.dmp
C:\Users\UDAY\AppData\Local\Temp\WER-71308-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Iam also uploading the "Windows_NT6_BSOD_jcgriff2" and "Perfmon html" files as rar.

please go through and solve my problem

Thanking You.

A:BSOD with error msg "Bad pool Header Data"

1. The single DMP blamed Avast.
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
2. Please run the System Update Readiness Tool (SURT) and then update to SP-1

32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

Read other 4 answers
RELEVANCY SCORE 210.4

Hello, so I've been experiencing a large amount of BSOD's when I game but I've recently upgraded to windows 10 in hopes of the issue possibly being fixed so the old crash dump files are gone. One bsod occured today, so I'll leave a download for it below, thanks for any help

Specs: Processor
AMD FX(tm)-6300 Six-Core Processor
Video Card
AMD Radeon R9 200 Series
Memory
8.1 GB
Operating System
Microsoft Windows 10 (build 10240), 64-bit

A:Random BSOD when gaming "BAD POOL HEADER"

Hello Ghost Prodegy, Please upload the BSOD Posting instructions, BSOD - Posting Instructions - Windows 10 Forums. Also,

Please fill out your System Specs
   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.
[LEFT]If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you are unsure how to do it, maybe this will help System Specs - Fill in at Ten Forums - Windows 10 Forums



The dump file you uploaded sys this


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
***************************************************************************... Read more

Read other 30 answers
RELEVANCY SCORE 210.4

Firstly, apologies if this is an issue that's been dealt with elsewhere (if so, I'd appreciate a pointer - I couldn't find anything dealing with this specific problem through a keyword search).

I'm running Windows XP Home with SP2 (which I installed some time ago, and didn't cause any problems that I noticed).

But recently, my computer turned itself off - and every time I turn it on, straight after startup I get a BSOD with the following details:

BAD_POOL_HEADER

STOP: 0x00000019 (0x00000020, 0xFEC94518, 0xFEC94620, 0x0A210001)

The system seems to run fine in safe mode, but I haven't been able to use any debugging programs, etc, 'cause I didn't have them installed before the crash, and I can't figure out how I can do install them within safe mode, which is the only way the system will run.

The only thing I've changed on the system recently is that I installed an update of MSN Live Messenger - but I've disabled automatic startup which hasn't made any difference; and I haven't been able to reinstall it b/c, again, I can't/don't know how to install/uninstall programs in safe mode.

Any help would be greatly appreciated.

A:"Bad Pool Header" BSOD - no apparent reason

are you using a hp scanner or printer

Read other 3 answers
RELEVANCY SCORE 210.4

"bad pool header" blue screen crashed on me while playing Battlfield 3

? OS - Windows 7 x64 OEM
? What was original installed OS on system? - Windows 7 x86
? Age of system (hardware) - 5 years old
? Age of OS installation - have you re-installed the OS? - 5 years old, does update to 64 bit count?
? CPU - Intel Core 2 Duo E6750 2.66GHz
? Video Card - ATI HD 3870
? MotherBoard - Gigabyte GA-P35-DS3L
? Power Supply - brand & wattage - Antec 550W

Thanks in advance

A:BSOD: blue screen "Bad pool header"

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.


Quote:




Daemon Tools (and Alcohol % software) are known to cause BSOD's on Win7 systems due to the sptd.sys driver.
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ




9 memory dumps from 01 Aug to 31 Oct 2011 (3 months)
5 different BSOD error codes
4 different causes are blamed.
This is usually a pattern for a hardware failure, but it can be cuased by incompatible software, faulty low-level drivers (such as the sptd.sys driver in Daemon Tools), or even by malware.

If the above procedure doesn't stop the BSOD's, please run Driver Verifier according to these instructions:

Quote:




Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can rest... Read more

Read other 1 answers
RELEVANCY SCORE 210.4

Good evening, after re-installing Win7 pro today I got a BSOD for the first time since I've had this machine.
Did Memtest86 (2 passes) and the memory seems ok. I really would like to know what's going on.
Maybe someone can tell me something from the .dmp file.
Thanks a lot

Read other answers
RELEVANCY SCORE 209.6

For the past two days I've been getting BSOD while playing games (been testing it on cs:go and it crashes every time after about 8min) or/and while the computer is idle. This mostly occurs while a game is open and sometimes the blue screen doesn't even come up, the pc simply restarts (which I believe is a sign of faulty ram) and comes up with the pop up like it does when you get a BSOD (after the pc reboots and it asks you to try and find a sollution).

It first occured when I upgraded to windows 10 (from win7), naturally I downgraded to win7 however the usb drivers became corrupt and therefore I had to clean install win7. After doing so the same problem occured giving a BSOD with this in the dump file:
(1st crash ) Imgur: The most awesome images on the Internet
(2nd crash ) Imgur: The most awesome images on the Internet
(the most recent 2 in the dump files)

After seeing this I fresh installed windows again and the problem is still occuring, Ive tried installing older graphic drivers however that made no difference (im currently running the drivers that came on a cd with my pc).

I've tried running memtest 86 however the computer turns off the display and stays on for some reason, the monitor goes blank and my backlit keyboard turn off leaving the pc in a state where it is on however when you just press the power button it turns off (don't have to hold it). I've tried running it twice and both times it simply crashed.

After running the windows memory diagn... Read more

Read other answers
RELEVANCY SCORE 208.8

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers
RELEVANCY SCORE 208.8

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

Read other 9 answers
RELEVANCY SCORE 208.8

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

Read other answers
RELEVANCY SCORE 208.8

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

Read other 6 answers
RELEVANCY SCORE 208.4

Hello

Recently I've been having a lot of problems with BSOD's. It started about a month ago, but stopped when I used the Windows Recovery Tool. Now I am getting BSOD's again and using recovery doesn't seem to work. I did a clean install of Windows 7 x64 about 2 months ago.

I used the SF diagnostic tool and uploaded the files as an attachment.

Any help would be greatly appreciated. Just tell me if you need to know more about my system.

A:Frequent BSOD's, "bad pool header"

Please post this before we continue: Windows Genuine and Activation Issue Posting Instructions

Read other 5 answers
RELEVANCY SCORE 208.4

Hello all,
One day about a week ago, my computer crashed when I was doing nothing abnormal. I believe my room mate had just played WOW or something. all of a sudden, the computer shuts down and crashes every time it starts up again when programs are loading. At first, every time i would try to start up, antivirus and other programs would be launching and then a BSOD complaining about "bad pool header" would come up and it would reset after a certain amount of time.

At this point, my first course of action was to disable startup programs because i was able to boot into safe mode. So i used MSCONFIG and edited the start up files down to pretty much nothing, and it would still crash when i started into windows normally, even though safe mode worked.

Then my room mate went into safemode a litte later when i was away and downloaded an anti virus that apparently found a single virus in the system (even though i have been running nod32 for a very long time...) and also ran registry mechanic and repaired everything that it showed. This did not help, the same thing happened upon start up, even with everything disabled in the startup sequence.

After that, i decided to do a repair installation of XP and that worked fine, but after i started to start up normally from there, the same BSOD came up but it occurred earlier in the start up process... during the welcome screen loading. Windows still loads, but once the blue welcome screen comes up, it goes BSOD on me. However, ... Read more

A:BSOD "BAD POOL HEADER" on startup

Possible Causes:

NETGEAR Wireless Card: http://www.tweaksforgeeks.com/BAD_POOL_HEADER.html

Indexing Service: http://forums.tweaktown.com/showthread.php?t=18119

USB 2.0: http://www.techspot.com/vb/topic17282.html

More: http://www.google.com/search?q=bad_pool_he...:en-US:official
 

Read other 2 answers
RELEVANCY SCORE 208.4

I am very thankful to have found this forum, thank you for dedicating time to do this.

I upgraded a few things:

Processor: FX6100
Mobo: MSI FX 880GMS-E41
RAM: 2 x 4GB Kingston DD3
HDD: Seagate 1TB 7200


Everything was working fine after upgrade, was able to boot properly. I decided to hook up my A4-Tech G800 Keyboard and Logitech wireless mouse. Then boom, it keeps hanging.

I can boot to Safemode, Safemode w/ Networking. I tried last known config, but when it gets to the desktop - it switches to the BSoD.

I am hoping with the attachment, someone can help me. More power to everyone.

A:BSOD on boot up "Bad Pool Header"

Welcome to SevenForums.

Did you reinstall windows after all these Hardware upgrades?

Uninstall AVG: AVG | Download tools and utilities

Install MSE: Download Windows 7 Upgrade Advisor from Official Microsoft Download Center






Quote:
Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for Windows Malwarebytes - FreeGood and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.



Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup

Perform a System File Check:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and contin... Read more

Read other 3 answers
RELEVANCY SCORE 206

This "Persistent" error at startrup: The instruction at "0x7919af2" referenced memory at "0x00000010". The memory could not be written.
Sometimes appears at shutdown too.

Please help me fix this "Nagging problem"?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 3316 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 305242 MB, Free - 109486 MB; D: Total - 239013 MB, Free - 221087 MB;
Motherboard: Intel Corporation, DG33BU
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Disabled

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:17:37 AM, on 7/8/2014
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\logishrd\LVMVFM\UMVPFSrv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\Program Files\Common Files\Acronis\Schedule2\schedul2.exe
C:\P... Read more

A:The instruction at "0x7919af2" referenced memory at "0x00000010"Tech Support Guy Syst

Read other 10 answers
RELEVANCY SCORE 204.4

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

Read other answers
RELEVANCY SCORE 204

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

Read other 3 answers
RELEVANCY SCORE 204

Guys,

I am a little confused with regard to some of the mail options in Outlook Express. (I have version 6) What is the difference between the "Drafts" and "Outbox" folders?

Further how does the "Send Later" option work from the file menu? I always thought that "Send Later" was the same as using "Drafts" but what happend was that I was doing an e-mail, went to Drafts, or clicked on "Send Later" or Outbox and then after I clicked on "Send" doing a regular send, I checked my Sent folder and about 3 copies of the same message were delivered to the same person! (I only sent one message-not 3!)

What is the deal with the "Outbox" folder? Apparently that is not like the Drafts folder....correct?

What's the difference between doing a Save, Save As, and Send Later with regard to OE functions? If I want to save a message that isn't done yet, which of these 3 options should I use? (I.e, I want the message to go to the Drafts folder for example and stay there until I TELL OE to send it.) I think whatever I did above was that I modified my message and then click on where it just automatically sent next time I opened the message. A review of these features would be helpful!

Just for the record, I also use Yahoo Mail and find that so much easier!

Jack
 

A:Please Review OE "Send", "Drafts", and "Outbox" Options

Jack
To save an E-Mail to your Drafts folder for work on later then you use the File\Save option.
If you wish to save the E-Mail in another format such as .EML or .TXT or .HTM then you use the Save as function. You will also be required to specify a folder to save in or use its "My Documents" default.
Send later function if only one e-mail account exists will place the e-mail in the outbox and send it the next time you click on the send receive button. If you have multiple accounts then you can specify which account to send it from.

Dave
 

Read other 2 answers