Over 1 million tech questions and answers.

compaq presario memory help..

Q: compaq presario memory help..

Its a presario 5000, i ran the belarc advisor tool to see what kind of memory i have, it said i have PC133, so i ordered some more, well, for the heck of it, i removed the memory in it to clean the board and the sticker on the factory memory says PC100!! so will PC133 memory still work with this thing even though it has PC100 in it now?
thanks!

RELEVANCY SCORE 200
Preferred Solution: compaq presario memory help..

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: compaq presario memory help..

Read other 7 answers
RELEVANCY SCORE 72.8

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

Read other 6 answers
RELEVANCY SCORE 72

I have a Compaq Presario SR1960AN which has 1024MB PC2-4200 DDR2 memory.

I purchased another 2 gig of memory and each time I have tried to add it the computer beeps and doesn't seem to load.

I have taken the original memory out and tried the new memory which didnt work either.

Any suggestions would be appreciated.
 

A:Adding memory to Compaq Presario

did you check the new memory you purchased with the QVL to make sure it is compatible?
secondly, you didn't happen to buy something called 'high density ram' did you?
many times (and its advisable) that you use identical ram when adding memory, or at least the same brand, type (single sided, dual sided) capacity, timings, voltage, ect.
 

Read other 3 answers
RELEVANCY SCORE 72

I have a Compaq Presario 1070 and want to upgrade it. How much memory can it support? What is the maximum size of hard drive I can install? What is the port third from the left on the back used for? I have no documentation and can't find any info.
Thanks
 

A:compaq presario 1070 memory

Hi and welcome to TSG.

http://www.centon.com/com1315l.htm
 

Read other 1 answers
RELEVANCY SCORE 71.2

I have an old Compaq and want to increase the RAM to the maximum. Presently have two sticks of 128 SDRAM. I want to know if I can increase the RAM beyond 256 MB. What is the highest possible amount on this machine? I have searched the HP/Compaq sites endlessly but can't find out what the maximum RAM I can install. The only success on the HP/Compaq site was a out of stock stick at 128.

Compaq PC
System Serial Number: 1X07DTZ9R1T7
750 megahertz Intel Pentium III
Board: Compaq 06C0h
Bus Clock: 100 megahertz
BIOS: Compaq 686C3 04/18/2001
256 Megabytes Installed Memory
Slot 'DIMM1' has 128 MB
Slot 'DIMM2' has 128 MB
 

A:Memory upgrade for Compaq Presario 5000

Read other 7 answers
RELEVANCY SCORE 71.2

I just installed a simm in the external memory slot for the compaq presior 1200, for my neice.

She didn't have the manual. Her notebook is running with windows 98.

Do we need to anything else besides put the memory in the slot on the bottom of the presario 1200 for it to function. And if so what?

Do we need to change any settings or anything, or will everything happen automatically once I have installed the Simm.
 

A:memory upgrade for compaq presario 1200

Make sure the memory is FOR that Compaq, as generic memory is sometimes not compatible with Compaq computers.

But otherwise, pop it in, put the cover back on, power up... the system may BEEP "MEMORY CHANGE" - then reboot or something... but nothing to it.
 

Read other 1 answers
RELEVANCY SCORE 71.2

I have doubled the memory in my laptop and the basic system seems to note the increase.

However, I notice from the memory usage monitor that the usage never exceeds 50% ..... which would suggest the system does not appear to use the extra memory ...

....is there a software / confirhuration thing I need to do in addition to simply adding the memory ......???

I confirm that the basic system seems to note the full memory is present ... its just that the op sys does not seem to use it???

regards

A:Compaq presario f500 memory upgrade

Hi -

Let's see what system info files say.

Please run this app - http://jcgriff2.com/0x2/Windows_NT6_..._jcgriff2_.exe

When it is complete, Windows Explorer will open to your Documents folder and a newly created folder named Windows_NT6_BSOD_jcgriff2 will be hilighted.

Zip up the entire folder and attach to your next post.

Regards. . .

jcgriff2

`

Read other 6 answers
RELEVANCY SCORE 71.2

I'm trying to upgrade the memory on a presario 7360, but the memory cards are blocked by the hard drive and the cd rom. The question is how do I remove the screws from the other side of the hard drive and cd rom to move them out of the way so that I can remove the memory cards. Thanks
 

A:Upgrading memory on compaq presario 7360

I am not familiar with the innards of one of these but it is common to have the drives on a subframe which comes out as 1 piece.
 

Read other 3 answers
RELEVANCY SCORE 71.2

I have a compaq presario 5000, it has 64k memory in it right now, i checked my model number and all that at crucial.com, it says i have 3 banks of 1, so does that mean i can add one stick of 256 to the 64 in it now, or do i have to add it in pairs or do i have to remove the stick of 64 to add the stick of 256?
thanks!
 

A:upgrading memory on a compaq presario 5000

Read other 16 answers
RELEVANCY SCORE 71.2

Over the past few weeks I've been getting intermittent BSOD crashes with "unexpected IRQ" or "page fault in non-page area" errors. These were often accompanied on reboot by POST beep code 1-3-4-3, error in first 512K of base memory.

Memtest86 fails after a few passes with the unexpected IRQ error.

Replaced both internal and external OEM memory modules (Hynix 512MB PC2700S DDR 333MHz) with two PNY 1GB PC2700 333MHz modules.

Things are worse now. Getting POST beep codes of 1-4-1-1 and 3 and 2, all having to do with memory.

Questions: 1) What is the significance of "S" in PC2700S? 2) Are the internal and external modules the only memory to worry about, or is there some other motherboard memory that could be causing this? 3) Suggestions?

Thank you.
 

A:Compaq Presario R4000 memory problems

Pull the hard drive and see if the laptop tries to POST normally
 

Read other 7 answers
RELEVANCY SCORE 70.4

Alright folks,
I'm working on my Mom's Compaq 98SE Laptop and want to add memory. I can't find specs on the mainboard anywhere, to determine what this board is capable of taking, before I try to order. When I run the CPU-Z utility on the system, it gives me the following... Mainboard manufacturer: Compaq, Model: 05D0h (TBD), Memory: 64 MBytes SDRAM (in one slot), Slots: 2, Processor: Intel Mobile Pentium II 433 MHz.
Does anyone have a website reference (or outright knowlegeable advice) that I can follow to locate the technical specs for this board? Any other particulars as well would be appreciated. I do know for a fact that Compaq systems are very persnickety about proprietary hardware and software even. Any hints would be welcome.

Dave Danger
 

A:Solved: Compaq Presario 1930 laptop (Memory?)

You need PC100 SODIMM. Maximum is 128Mb that you can put in it.

HP/COMPAQ Memory Details

$54.00 on the link above

Kingston's Website has a pricegrabber for you (shows competitive prices as well as theirs, a bit like Progressive )

HTH

~ Tidus4Yuna
 

Read other 3 answers
RELEVANCY SCORE 70.4

okay, this is getting quite frustrating, it started a few months ago when i moved, hooked up my desktop and it ran fine, then it shut off and wouldnt start back up, so i figured it was the power supply after trying and trying to get it to turn on with no avail, i gave up and just wated till i could afford a new power supply, well i finally have the money for it, but out of curiousity i tryed to plug it in and it worked, now all i keep getting is the blue screen of death with small memory dump or complete memory dump, it will stay on for a hour to 2 hrs then blue screen, i have to restart it sometimes 2 or 3 times, because the screen will pop back up as soon as i load into my desktop, I thought maybe it was a virus or adaware but have ran both programs and found nothing, Help what else can i do? I am tired of being in the middle of mail or convos and then losing everything, I did order the new power supply BTW

Thanks in advance for any help you can give me
Barb

I have included the last 5 dmp files
 

A:compaq presario restarts on its own small memory dump

Hello and welcome to Techspot.

All your minidumps crash at ftdibus.sys. See HERE for further info. They all have a bugcheck of 0A.

0x0000000A: IRQL_NOT_LESS_OR_EQUAL

Typically due to a bad driver, or faulty or incompatible hardware or software. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own.)

I suggest that you update this driver.

Regards Howard :wave: :wave:
 

Read other 22 answers
RELEVANCY SCORE 68.8

As I had the money for it (one paycheck and then the next paycheck) I purchased 64 megs and 128 megs of RAM manufactured by PNY to install in my Compaq Presario 5461. I also want to buy a Western Hard Drive (20 gigs)to install for this Compaq computer.

But now someone told me that none of these will fit in my Compaq because it has a proprietary bus.

Is this true?? I hope not -- I can't afford what Compaq's selling!
 

A:Adding aftermarket memory and hard drive to Compaq presario 5461

Read other 7 answers
RELEVANCY SCORE 68.8

I am searching for information on how to add more hard drive memory to my Compaq Presario 5738 desktop computer. I have found options to increase my RAM, but not the hard-drive.

Does anyone have a suggestion as to where I can find this information?

Thanks!
 

A:Need Expert Advice of Compaq Presario 5738 Hard Drive memory

Read other 9 answers
RELEVANCY SCORE 61.6

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

Read other 1 answers
RELEVANCY SCORE 61.6

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

Read other 1 answers
RELEVANCY SCORE 61.2

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

Read other 14 answers
RELEVANCY SCORE 54

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

Read other 6 answers
RELEVANCY SCORE 54

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

Read other 3 answers
RELEVANCY SCORE 54

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

Read other 9 answers
RELEVANCY SCORE 54

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

Read other 8 answers
RELEVANCY SCORE 54

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

Read other 1 answers
RELEVANCY SCORE 54

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

Read other 3 answers
RELEVANCY SCORE 54

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

Read other answers
RELEVANCY SCORE 54

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

Read other 1 answers
RELEVANCY SCORE 54

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

Read other 16 answers
RELEVANCY SCORE 54

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

Read other 1 answers
RELEVANCY SCORE 53.6

I need help I have a Compaq Presario R4010US Laptop. The keyboard does not work for some reason, I plugged an external usb keyboard into it and it works fine. Could the ribbon cable that goes from the keybd to the motherbd be bad?

Fwilli2

A:Compaq presario R4010US

hi Fwilli2 welcome to TSF,

take the keyboard off and re-seat the ribbon cable. you might want to try uninstalling the keyboard from device manager and then restart computer see if it work before you take keyboard out.

Read other 6 answers
RELEVANCY SCORE 53.6

hi guys!I have a problem with my laptop unit..I download the ATI mobility radeon hd 5430 and i install it but there is a message in the end of installation appear that INSTALLATION COMPLETE(WARNING OCCURRED DURING INSTALLATION) and when i press the view log it always like this:


Existing packagesATI Catalyst Install Manager
The Lord of the Rings FREE Trial
Microsoft Visual C++ 2008 SP1 Redistributable
Communication Opt-in

Packages for install
ATI Catalyst Install ManagerFinal Status: Success
Version of Item: 3.0.790.0
Size: 20 Mbytes


Other detected devices

Error messages



I dont know what to do..please help me..
 

A:Compaq Presario cq-42-160tu

Make sure you have all the Windows .NET Framework Updates installed before you update the ATI catalyst driver
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hi

After unsucessfully trying to get rid of some nasty Malware (Antivirus XP Pro 2009 to be precise) I'm currently trying to perform a factory reset on my Compaq Presario SR1909uk which had Windows XP.

I'm performing this from the recovery discs I created when I bought the PC.
However, I keep getting various error messages saying either

'Cannot copy file C:\1386\APPS\APPS15417\src\VIRUSCAN7.DAT or

C:\1386\APPS\APPS15417\src\Setup\asCore\Antispam\btevclid.dll\MANIFEST\asnmobj.spm

I keep aborting when I get these messages and the progress perecetage remains. If I do this until I reach 100% do you think it will work?

Other than buying some new recovey discs from Compaq or taking it to be fixed, are there any alternatives please?

Thanks

A:Compaq Presario SR1909uk with XP

Try cleaning your Recovery disc.

Read other 3 answers
RELEVANCY SCORE 53.6

hello my laptop started melting charger tips from my sister used an universal charger since it wuz hers then. I checked the universal charger specs and it was not compatible with computer.The charger for my laptop is working perfectly bt when ever charging the tip gets extremely hot untill it starts to melt. I have recently changed the charging port on the motherboard but the laptop is still heating the charger tip. The system is compaq presario v2000 currently running on xp pro. i dnt want to purchase a new motherboard any suggestions on what needs to be changed.
 

Read other answers
RELEVANCY SCORE 53.6

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suc... Read more

A:Upgrading my Compaq Presario

Read other 16 answers
RELEVANCY SCORE 53.6

Hello! I am attempting to change a 80mm fan in my Compaq computer. The fan I want to change is, I believe, called the CPU fan. It has a lever next to it and 4 screws holding it down. My question is this: Do I have to move the lever on the side of the fan in order to pull the fan up and proceed to remove the screws or do I just remove the 4 screws?  Also, how do I remove the screws considering the awkward position they are in? (I've been working on trying to remove the screws; however, it is difficult to maneuver the screwdriver into the top of the screws to remove them. This is because part of the fan case is above the screws making it necessary to place the screwdriver sideways in order to remove the screws.) Thank you for your response.  

Read other answers
RELEVANCY SCORE 53.6

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

Read other 1 answers
RELEVANCY SCORE 53.6

i have a compaq presario 3630AS desktop. It came with quick restore CDs and a recovery CD. If i have to re-install win xp should i use quick restore CD or the other ????? Pls help

A:compaq presario 3630AS

Compaq Recovery CD options
The Compaq Recovery CD enables you to restore your system files from a separate partition on your hard drive. The four options on the Recovery CD are listed below.

Restore option Description
Emergency Diskette Creating this diskette is important as it allows you to save your computer's unique setup information for use in the event of an emergency. Store the diskette in a safe place.

User Backup Backs up all information and files on your hard drive and stores them in a separate partition on your drive.
User Restore Restores your hard drive to the state it was in when you last used User Backup.

Factory Restore Restores your computer to its original factory-installed software state.

Read other 1 answers
RELEVANCY SCORE 53.6

If any here has an HP Pavilion or Compaq Presario PC or Notebook (current models), they will notice that the fan kicks in when needed. The fan doesn't really annoy me as much on my Compaq laptop, but on my HP desktop it is really annoying and loud. I think it forgot that it was only supposed to come on when needed because it is now on almost all the time. Can someone explain to me how this fan works in more detail and how I can possibly adjust when it comes on or at least the fan speed, SOMETHING!!! Thanx in advance.
 

A:HP/Compaq Pavilion/Presario Fan

If the fan kicks in more then it used to it might mean that the computer needs a cleaning. These fans are temperature controlled and only kick in when a sensor detects the temperature to be at a certain level. Sone fans need to be on at all times - like the one on the CPU - but it may be possible to control it speed with software or BIOS settings.

Speedfan comes to mind, do a google search for it. It will list the motherboard temps and allow fan speed adjustment if the board supports it. If you have a case fan you can control its speed, as for the CPU fan - thats best left on a full speed.

First, open up the case and see if it needs a cleaning. You can also replace stock fans with quieter ones if they are too loud or wearing out.
 

Read other 2 answers
RELEVANCY SCORE 53.6

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

Read other answers
RELEVANCY SCORE 53.6

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

Read other 3 answers
RELEVANCY SCORE 53.6

My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.

This is what it says....

First, if your Presario Notebook is attached to a Port Replicator (QuikDock), you must turn the power to the computer off, disconnect it from the QuikDock, and plug it into an external power socket. Disconnect any printer cables or other peripherals from the computer before using Quick Restore.
1. Insert the Quick Restore CD (bootable disk) in the CD drive, and press Enter. A WARNING message appears advising that you are attempting to totally reformat your hard drive. Confirm by following the next step.
2. Press 1 and then Enter to continue. The Power Quest Quick Restore Wizard starts copying and uncompressing data to the local hard drive. This process takes approximately 7-10 minutes.

This warning message never appears and none of this ever happens. Does anyone know why... Read more

A:Compaq Presario 700 (Windows XP)

Is there an autorun.exe? Setup.exe? Any executable at all on the root of the disk?
 

Read other 1 answers
RELEVANCY SCORE 53.6

I have this old Compaq and I used to be able to burn CD's until the day I stuck in my little portable device one would use to store pictures and things..I forget what its called,but you can insert it into a USB port then add or remove pics or anything and remove it and put it back around your neck and go. Anyway after doing this one day I go to burn a Cd and my computer is telling me I have these new drives called E,F,G, & H, which it has now bundled into something called a USB mass storage device. it no longer recognizes that i have a working burner.. it does not even recognize that I have a drive D. All it is reading is those removable device drives that came along with my junk drive. The 'Safely Remove Hardware" option has been coming up and ive used it to disable these other drives..but its still not working..How can I fix this?

A:compaq presario SR1103WM

Right-Click on My Computer, select Manage. In the left pane there should be a listing for Disk Management - click that.

Now, in the right pane, scroll down and see if your CD is listed, but has no drive letter. If so, right click on the grey part and choose "assign letter". I would use Z: (no chance of a USB device trying to grab that letter).

Read other 3 answers
RELEVANCY SCORE 53.6
RELEVANCY SCORE 53.6

Hi, how do you restore to factory settings a (COMPAQ PRESARIO SRI617CL)?

A:(COMPAQ PRESARIO SRI617CL)

If this computer has a Recovery Partition, when you boot the computer on the logo screen you should see a message Press F2 for setup and Press X for Recovery (X being F11 or whatever key it says) If you don't get that message, then this computer does not have a Recovery Partition (if you can still boot the computer you can look in Disk Management to see if there is a drive called Recovery)
Other then that you will need the recovery discs you made when you got the computer. How to Run Compaq Recovery Disk | eHow.com

Read other 1 answers
RELEVANCY SCORE 53.6

i have recently formatted my hard drive and reinstalled xp home, i have found all the necessary drivers etc but unable to use my mouse, on the device manager a yellow icon appears stating unknown device, iv searched everywhere for drivers etc but all came blank, i went to the compaq site and downloaded the mouse/keyboard driver from there but then got an error stating unable to find version of runtime to run this application '' iv downloaded the most recent .NET framework and still nothing, iv searched for more help but unable to find any results, anyone got any pointers if im doing something wrong ?

A:compaq presario S5600UK

What is the make and model # of your mouse?
In Device Manager, right click the Unknown Device and Uninstall it. Now remove the USB cable for the mouse from the computer end. And restart the computer. When the computer comes back up, plug in the mouse into the Back USB port of the computer and not the front or through a hub as these ports are weaker. It should install. if not, go to the mouse manufacturers support download drivers site and type in your model # and download the driver.

Read other 1 answers
RELEVANCY SCORE 53.6

Not sure if anyone can help here but worth a try.
I brought a new compaq presario desktop pc just before xmas. I got sick of all thier crap on it so I re-installed with another copy of windows xp prof sp2. Now I am having problems and want to go back to the original installation on the compaq.
Didn't do any restore disks as no-one explained this to me then. The install partition is still on the compaq but when I load up comp and try to press F10 to do it, it doesn't work (just keeps loading into windows). I can not figure out how to get the reinstall to start and am not sure how to do it manually. My brother has tried to manually start it in windows but it doesn't like this. Have tried changing the boot drive using the Esc and F1 keys as per start up options but it has the drive as grouped and can not specify H drive (where compaq restore is).
Any suggestions welcomed before I have to find more money to buy disk!
My brother has suggested that maybe we can delete the c drive partition therefore forcing the h drive to run, but want to leave this as a last result in case it doesn't work.
Thanks to anyone who reads this.
Ange

A:Need Help With Restore Of Compaq Presario

Ok Frad, if you want to restore the system to the way it was when you purchased it, the best way is to place the restore cd in your drive and restart. when the option comes up press what ever key you ned to to enter setup. scroll through the setup untill you can change the boot options. place the cd drive as your 1st boot option. when you have done that, save and exit setup. when the system reboots, you will be given the option to restore. READ THE WARNINGS CAREFULLY, THIS WILL FORMAT THE HARDRIVE AND ERASE ALL THE DATA THAT YOU HAVE. I recomend that you burn a copy of all your important files prior to doing this and good luck.

Printboy67

Read other 4 answers
RELEVANCY SCORE 53.6

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

Read other 1 answers
RELEVANCY SCORE 53.6

I have a compaq presario 7470 in my possession. It used to work, but not for some reason it refuses to. I just bought a power supply for it and it still doesnt work. I figured out that if u remove the J3 pin from pins 2 and 3 after pressing the power button it will turn on. The compaq screen comes up and it says '102-System Board Failure.' This seems bad...what should i do? is it a fried motherboard? if the board was fried would it even turn on?? Thanks!
 

A:Compaq Presario 7470

I don't think the motherboard is fried in which case it wouldn't boot, as you say. But it definitly is having some problems...

Has Compaq support service gotten back with you yet ?
 

Read other 11 answers