Over 1 million tech questions and answers.

DRIVER POWER STATE FAILURE Sleep mode BSOD.

Q: DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hey!

I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD..


However the system managed to dump two files for me on BSOD.

Take a look and thanks for the help you give me :)

RELEVANCY SCORE 200
Preferred Solution: DRIVER POWER STATE FAILURE Sleep mode BSOD.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hello,

Please take a look at the following thread and perform all of the requested steps.

Once you have all the requested reports please attach back here.

http://www.techsupportforum.com/foru...ta-452654.html

One dump is really not sufficient to determine the cause. The reports will also provide other info to help diagnose the issue.

The dump provided indicates a problem with the Realtek Network driver please try updating or re-installing this driver.

Realtek

I would also suggest that you fully update Windows including the Windows 7 Service Pack.


Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03268000 PsLoadedModuleList = 0xfffff800`034a5e50
Debug session time: Fri May 10 12:00:54.715 2013 (UTC - 4:00)
System Uptime: 0 days 8:41:33.010
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007087060, fffff80000b9c4d8, fffffa80079f3200}

Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8007087060, Physical Device Object of the stack
Arg3: fffff80000b9c4d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa80079f3200, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: pci.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc117

MODULE_NAME: pci

FAULTING_MODULE: fffff88000f70000 pci

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`00b9c488 fffff800`03347273 : 00000000`0000009f 00000000`00000003 fffffa80`07087060 fffff800`00b9c4d8 : nt!KeBugCheckEx
fffff800`00b9c490 fffff800`032e429e : fffff800`00b9c5c0 fffff800`00b9c5c0 00000000`00000001 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x292b0
fffff800`00b9c530 fffff800`032e3dd6 : fffffa80`07786168 fffffa80`07786168 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x66
fffff800`00b9c5a0 fffff800`032e44be : 00000048`dc1686e4 fffff800`00b9cc18 00000000`001e9bbd fffff800`03456a28 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9cbf0 fffff800`032e3cb7 : 00000017`8eb549c2 00000017`001e9bbd 00000017`8eb549fa 00000000`000000bd : nt!KiTimerExpiration+0x1be
fffff800`00b9cc90 fffff800`032e0eea : fffff800`03452e80 fffff800`03460c40 00000000`00000000 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`00b9cd40 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9cd00 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0x9F_3_Rt64win7_IMAGE_pci.sys

BUCKET_ID: X64_0x9F_3_Rt64win7_IMAGE_pci.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa80079f3200
Irp is active with 4 stacks 3 is current (= 0xfffffa80079f3360)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800858f050 00000000 fffff80003523f70-fffffa80079d9c20 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00015400 00000000 00000005 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80079d9c20

Args: 00000000 00000000 00000000 00000000

Read other 2 answers
RELEVANCY SCORE 136.4

I have tried to test this issue my self by trying to read trough the DMP file and Event Viewer. (haven't done this before, so i think i have possibly overlooked something)
The computer model is: HP ProBook 430 G2
The things i have tried is uninstalling and updating the drivers.
Using another OS Disk (It worked fine when doing this)
Starting in safe mode (This also worked fine)
Checked advanced power settings (Was nothing wrong there from what i could see)

Read other answers
RELEVANCY SCORE 136.4

Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is greatly appreciated.

A:BSOD During Sleep Mode - Driver State Power Failure

Hello fran.

It appears that Avast is causing the BSODs there.

avast! Self Protection Driver

Code:
fffff880`02677de8 fffff880`068e2940Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2f940
Description here: Driver Reference Table - aswSP.SYS

avast! Virtualization Driver

Code:
fffff880`02677d68 fffff880`066d32ccUnable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x4e2cc
Description here: Driver Reference Table - aswSnx.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Using more than one antivirus program is not a good practice. It will make your system unstable in turn. Uninstall McAfee Using McAfee Removal Tool.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it... Read more

Read other 1 answers
RELEVANCY SCORE 134.8

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 134.8

Hello

I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook.
It always come up after I put the computer in sleep mode.

After dozen of search and websites, I found this forum.

I hope you will be able to help me.

Please find below the informations about my OS
- Windows 7 Home Premium Edition
- x64
- OEM
- age of the system : 3 years old. The hard drive has been replaced 1 year ago.
- age of OS installation : 2 days old (reinstalled from the recovery disk)

I have also attached the System Health Report AND the BSOD Dump & System File Collection report.

Let me know if you need something else... and Thank already !

A:BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)

Please install any Windows Updates you have not yet installed. I notice you do not have Service Pack 1 installed yet.Update to Service Pack 1 (SP1)Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site




Crashes indicate USB device issues.Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained t... Read more

Read other 1 answers
RELEVANCY SCORE 133.6

Hello all

This is my first post in here. Please bear over with my English – it is not my native language.

My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
SILVERSTONE Grandia 04
DeZen PSU 500 Watt, TitanPower, 17-19 db
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x4 GB Corsair Vengeance ram (just bought new ones to see if it would help)
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB

My previous setup was with a AMD 240e but I have made a clean install.

I use Microsoft Security Essentials for antivirus and have firewall turned on.

The Media Centre machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings.
Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wakeup is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity.

I have made several new install and tried to exclude the SSD and install a 32 bit Win7 – but the BSOD still occurs 4-5 min after awake.

I have updated all drivers and tried to run Verifier with no luck.

Hopefully someone can help

A:BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I have updated the Perfmon details - I had forgot to run the Windows Experience Index

Read other 9 answers
RELEVANCY SCORE 124.4

I am experiencing an issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.

I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.

Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.

A:Driver Power State Failure in sleep mode

Hi M15 and welcome to the forums ^_^,

I am in the process of analyzing your dump files further. Below has been provided analysis of your dump files for Informative purposes.

Code:
**************************Fri Jun 6 04:50:12.040 2014 (UTC + 5:30)**************************Probably caused by : storport.sys ( storport!RaSendIrpSynchronous+70 )

BugCheck 9F, {4, 12c, ffffe0017919e880, ffffd00049969950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_storport!RaSendIrpSynchronous

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Version V2.20

BIOS Release Date 02/18/2013

Manufacturer Acer

Product Name Aspire M5-481PT

??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jun 6 01:42:48.219 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for iaStorA.sys

*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys

BugCheck 9F, {3, ffffe000d7f8e060, ffffd000ca5e9930, ffffe000da3955c0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_disk_IMAGE_iaStorA.sys

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Ver... Read more

Read other 12 answers
RELEVANCY SCORE 124

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 122.8

I am using lenovo G580-20150.
I know this problem have been opened a tread but the problem i dont' think it's same so i woud like to ask for some solution after listening to my problem.
I have been user of windows 8 and 8.1 for quite some time.
everything works fine for me for the windows that i currently using , windows 8.1.
including i can put in sleep and wake it as usual.
but ! since past few days i notice that my computer getting weird when i enter sleep mode (for example closing the lid)
it crash... it bsod.

And it occur since the day after i installed somekind of VPN software and wiFI sharing that my friend gave me.
After that day, i can't put my computer into sleep. whenever i do that it keep crash.

at first , i thought lenovo energy management that cause the prob
so i uninstalled... it still makes no different , still i can't put my computer to sleep.
after that i uninstalled the vpn and wifi sharing software, it still makes no different.
But i am very sure that the vpn and wifi sharing software cause the problem.

Because before this everything works fine until that two software comes to my computer. I really need someone that able to analysis the dmp file. TQ

I willing to learn and contribute if i were given the opportunity . tq

A:Driver Power State Failure after enter sleep mode

Hi Eric & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe00175b29e10
Irp is active with 3 stacks 2 is current (= 0xffffe00175b29f28)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe00177cc0050 00000000 fffff8025f7952d8-ffffe00173c59d60 Success Error Cancel pending
\Driver\tunnel nt!PopRequestCompletion
Args: 00015600 00000001 00000004 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00173c59d60
Args: 00000000 00000000 00000000 00000000


Now, as we can see from the Dump file analysis, "tunnel.sys" has been blamed which is the Microsoft's Tunneling Driver but since it is a component of Windows, chance of it being the culprit is extremely low. This means your guess that the BSOD are caused by the VPN Software.

On checking the Drivers, I found the SoftEther VPN installed on your system. Please uninstall it from the system and see if the system still BSOD's or not.

Let me know how it goes ^_^.

Read other 3 answers
RELEVANCY SCORE 122.8

I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't help. The problem only started occurring after one of the following:
- Updating Malwarebytes to latest last week
- Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were)
- Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com
Here is a log created by BluescreenView:
==================================================
Dump File : 060514-96281-01.dmp
Crash Time : 6/5/2014 7:23:39 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe001`218f88e0
Parameter 3 : ffffd000`bff2b930
Parameter 4 : ffffe001`2561d1c0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153fa0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+153f... Read more

A:Driver power state failure after resuming from sleep mode

Hi Lan1 and welcome to the forums ^_^,

I have analyzed your Dump file and below has been provided an analysis of your dump file for informative purposes :-

Code:
2: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00135b5c060, Physical Device Object of the stack
Arg3: ffffd000c3df9930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0013217d880, The blocked IRP
Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3
DRIVER_OBJECT: ffffe00135b70c30
IMAGE_NAME: usbccgp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52678625
MODULE_NAME: usbccgp
FAULTING_MODULE: fffff80157d82000 usbccgp
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`c3df98f8 fffff801`31803c1e : 00... Read more

Read other 7 answers
RELEVANCY SCORE 119.2

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 119.2

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 118.8

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

A:BSOD after going to sleep, driver power state failure

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

Code:
>[ 16, 2] 0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007049c50

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`06d15000 fffff880`06d7f000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:34:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ RAM - Test with Memtest86+
→ Guide to using Memtest86+ - Geeks to Go Forums

Read other 9 answers
RELEVANCY SCORE 118.8

Been having issues with sleep mode with my build for months but in the past couple weeks it has gotten worse. When the computer goes into sleep, there's about a 50 percent chance it will wake up when I move the mouse. The other times I have to hard restart. In the past week it is now BSODing and giving me the attached dump reports. I'm pretty sure it's a driver issue but I can't narrow it down any more than that. Interested to hear what the experts think.

A:BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Hi slash196.

Update the driver to TP-LINK 150Mbps Wireless Lite N Adapter from Download - Welcome to TP-LINK, by matching with your device number.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, if possible, update the BIOS to Version 1501 from ASUSTeK Computer Inc. -Support- Drivers and Download M4A88TD-M/USB3

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a9e060, fffff80000b9c518, fffffa800a2fb920}

Probably caused by : ntkrnlmp

Followup: MachineOwner
------------------------------------------------------------------------------------------
Dispatch routines:
[00] IRP_MJ_CREATE fffff880016e7c30 ndis!ndisCreateIrpHandler
[01] IRP_MJ_CREATE_NAMED_PIPE fffff8800177e490 ndis!ndisDummyIrp... Read more

Read other 1 answers
RELEVANCY SCORE 117.6

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 117.6

New build i7 asrock motherboard W8 Pro. when waking from sleep everytime I get driver_power_state_failure BSOD.
Looking for some help on where to start. Updated the bios and everything else works great.

Thanks for any advice

Attachment 14584

A:BSOD Driver Power State Failure when waking from sleep

You have 3 hard drives - what is the make/model/wattage and age of your Power Supply?

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with you... Read more

Read other 5 answers
RELEVANCY SCORE 117.6

Dear Sir/Madam,

I've been having this issue since updating to Windows 8.1. I will wake my computer from it's sleep and a few minutes later I get the BSOD. In one notable event early on, I got two in a row after the computer restarted from the previous BSOD.

I fiddled with my power settings (I was trying to avoid my computer actually shutting down during sleep/hibernation) a few months ago and after that I didn't have any BSOD events that I recall until this past week. When they do happen, they tend to happen in rapid succession, as you can see from the dates on the collected data I've attached (I see there's a .txt file with all my computer's information for you reference) - I've had one every day for the past three days.

I've read through many of these threads and tried several of the solutions. I am running verifier.exe since the BSOD has started up again since from what I can understand from reading the .dmp file and this forum that the message I'm getting about ntoskrnl.exe is misleading (?).

Please take a look at the dumps and other information collected from the DM Log Collector Tool and let me know if you can help me solve this problem.

Thank You.

A:BSOD Waking from Sleep (power state driver failure)

Hi, pnutbudder,

I've been having a similar problem since a few weeks ago. I suspect this is due to a recent Windows or driver update, since both of us had the same problem at the same time. I'm going to take a look at your dump files in a few hours, but in the meantime, could you tell me

1. whether you have Evernote or any Blizzard games installed
2. whether you've installed any new programs recently,
3. what graphics drivers you have installed,
4 what music or audio programs you have installed (eg, music players, movie editors, music studios and recording programs, game streaming programs)?

EDIT: Okay, I took a look at your dump files, and they point to a bad interaction between the "usbccgp.sys" and the "ksthunk.sys" driver. These are the same drivers that are misbehaving on my system, too (Lenovo Y510P). As far as I can tell, the only device that uses ksthunk.sys is the Lenovo EasyCam. Try this fix:

1. Download the "Broadwell" version of the camera driver on this page: http://support.lenovo.com/us/en/prod...loads/DS101169 . We're going to replace your current camera driver with Lenovo's original camera driver.
2. Open "Device Manager" by right-clicking on the lower left corner of the screen.
3. Double-click "Imaging Devices" to open it.
4. Right-click "Lenovo EasyCamera" and click "Disable". You should see a small downward-pointing arrow appear next to the picture.
5. Right-click "Lenovo EasyCam... Read more

Read other 5 answers
RELEVANCY SCORE 116.4

I am getting a BSOD mostly when I turn the computer on from sleep mode during sleep wifi will be on and most probably 1 of the browsers would have been working.

Reinstalled Windows 7 on Oct 8 and downloaded some drivers from the net.

I have uploaded the SF diagnostic zip file

Any help would be greatly appreciated

A:BSOD after turning computer on from sleep DRIVER POWER STATE FAILURE

Welcome aboard. Is there any reason that you haven't installed service pack 1?

Read other 9 answers
RELEVANCY SCORE 115.2

i guess i've been having this problem for about a month or so now and it's really becoming frustrating because everytime i have to leave my computer i have to shut it down if i don't want a BSOD..

i hope that someone can help me... every time i try to hibernate my laptop which is a HP DV4 Windows 7 Laptop i get a blue screen of death. it only started happening recently....maybe after i installed bit-defender..i'm not really sure..but it was doing fine before bit defender......

i used blue-screen view and with each time it registers a error it's with the driver for the NTOSKRNL.exe... i really hope that someone could help me because i just want my computer to go back to normal....and i wish that the problem has nothing to do with bit-defender......

tell me what you need and i'll try my best to get it to you so you can assist me with this problem cause i'm kinda new to the whole forum thing....

thanks..

A:[SOLVED] BSOD Driver Power State Failure When Hibernating/Sleep Windows 7 HP DV4

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html

Read other 17 answers
RELEVANCY SCORE 107.2

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 107.2

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

A:BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 105.2

Hi,
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.

My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.

Help!

A:Driver Power State Failure on wake from sleep

Which hardware diagnostics have you done?

Please run Driver Verifier according to these instructions: Driver Verifier Settings

Just a guess at this point, but try removing Diskeeper to see if that helps.
If not that, then try removing the Citrix software to see if it helps.

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Oct 11 09:56:37.534 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101113-15578-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 20:21:57.335
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 9F, {3, fffffa80036b7890, fffff800c68d07f0, fffffa800de92610}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80036b7890, Physical Device Object of the stack
Arg3: fffff800c68d07f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800de92610, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_ACPI_ANALYSIS_INCONCLUSIVE
CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"
MaxSpeed: 1700
CurrentSpeed: 1696
BIOS Version GDETA1WW (1.61 )
BIOS Release Date 09/14/2013
Manufacturer LENOVO... Read more

Read other 1 answers
RELEVANCY SCORE 105.2

My Toshiba laptop gives the above BSOD screen 9 out of 10 times when going to sleep. I have installed the latest Win 8 video drivers but that was no help.

I have attached a couple of the minidump files.

A:Driver, power, state, failure when laptop goes to sleep.

Hi,

Bit of a messy machine there. First thing is first. Update or uninstall your sptd.sys. The installer/uninstaller does either:

DuplexSecure - Downloads

----------

Update Synaptics Touchpad driver:


Code:
SynTP SynTP.sys Mon Aug 17 14:35:16 2009


----------

Update J-Micron Storage driver:


Code:
jmcr jmcr.sys Mon Jul 20 07:39:02 2009


JMicron/Home

-----------

Update from the manufacturer:


Code:
tosrfec tosrfec.sys Mon Jun 01 02:58:53 2009
tosrfcom tosrfcom.sys Tue Jul 28 06:18:20 2009
tosporte tosporte.sys Tue Jun 16 06:48:47 2009
Thpevm Thpevm.SYS Mon Jun 29 04:15:37 2009
thpdrv thpdrv.sys Sun Jun 28 22:02:56 2009


----------

Uninstall ESET. Windows 8 already has excellent a/v protection as a service.


Code:
epfw epfw.sys Tue Jun 28 03:30:10 2011
eamonm eamonm.sys Tue Aug 02 05:33:29 2011


----------

Uninstall ancient Acronis:


Code:
tifsfilt tifsfilt.sys Wed Aug 29 08:37:29 2007
timntr timntr.sys Wed Aug 29 08:38:23 2007


-----------

Update from manufacturer:


Code:
pgeffect pgeffect.sys Mon Jun 22 05:00:11 2009


---------

Visit Intel to let it scan to update storage drivers:


Code:
iaStor iaStor.sys Thu Jun 04 21:53:40 2009


---------

Update Realtek HD Audio:


Code:
RTKVHD64 RTKVHD64.sys Tue Jul 28 09:00:05 2009


Realtek

-------
Others needing update:


Code:
tdcmdpst tdcmdpst.sys Thu Jul 30 04:39:35 2009
TVALZ_O TVALZ_O.SYS Mon Jul ... Read more

Read other 3 answers
RELEVANCY SCORE 104

Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software

Laptop starts up and can shuts down with out any problem.
If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.

All drivers have been update using driver dating utility by WinZip.

Dump files & system health check report is attached.

Will appreciate any help or suggestion in resolving this issue.

Thank you.

A:Power State Driver Failure on putting PC to Sleep or Hibernation

Two issues

1-Virtally all of these were sysRelated to NETwNv64.sys Wireless WiFi Link Driver from Intel Corporation causing pci.sys to crash. I would re-install with newest driver available.
2-Your Symantec. I would remove and replace with Microsoft Security Essentials.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 103.2

Hi,

Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.

Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.

This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.

Many thanks in advance,

Hob

A:Driver Power State Failure on Sleep, Hibernate, Restart or Shutdown

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.
ONLY install the drivers from your manufacturer!

Please remove your VPN software.

Code:
*** WARNING: Unable to verify timestamp for tap0901.sys
*** ERROR: Module load completed but symbols could not be loaded for tap0901.sys

Read other 0 answers
RELEVANCY SCORE 101.2

my laptop takes 20 to 30 minutes to shut down and comes up with driver power state failure message...i hope you can open the files i attached, was not sure on how to save those files...

A:driver power state failure - user-mode dump

Hi -

Your zip files contained a 2.3 MB user mode dump; not a post-mortem BSOD mini kernel dump.

However, I was able to obtain info that I believe points to your problem. It listed a 0xc0000005 exception = memory access violation.

Code:
Unable to load image C:\WINDOWS\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.6195_none_cbf5e994470a1a8f\mfc80u.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfc80u.dll
*** ERROR: Module load completed but symbols could not be loaded for mfc80u.dll
*** WARNING: Unable to verify timestamp for nspmain.exe
*** ERROR: Module load completed but symbols could not be loaded for nspmain.exe
*** ERROR: Symbol file could not be found. Defaulted to export symbols for msvcr80.dll -
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspavpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspavpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspavpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspfwpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspfwpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspfwpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspclpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspclpi.dll
*** ERROR: Module load completed but symbols could not be loa... Read more

Read other 5 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

i got blue screen second time in one week, it said driver power state failure, i attached minidump file, running win 7 ultimate

Read other answers
RELEVANCY SCORE 98

Hi,

i got my notebook (MSI GE60) a month ago and since then i'm experiencing BSOD. It doesn't happen regularly. Sometimes it happens twice a day, sometimes nothing happens for 2 days .

Below i attached the dump files.

If any other info needed let me know.

A:BSOD: driver power state failure

two things, first Uninstall Daemon tools and then run this program:

Duplex secure

when you run the tool if the uninstall box is greyed out then your done If it is not then click it and let it uninstall. DO NOT click the install button It will install a Driver known to cause BSODs.

Second I notice that your video card driver (which is what the crash dumps are blaming as the problem) Is one of the drivers from the Dec 29 batch there are two things you can try, seeing if there is another update, I have heard tell that there is a beta driver that might solve the problem, or you can install an older driver and see if it fixes things. the drivers can be found here.

Read other 9 answers
RELEVANCY SCORE 98

Hi,

I an getting BSOD randomly and it is driving me a little loopy.

I was getting a Internal power failure on the machine sleeping but preventing hibernation solved that. I create a task to set the power plan to my preferred plan (never sleeps) and that has solved that issue.

Now I am getting this Driver Power State Failure about 30 minutes after I turn the machine on. Full details in attached Zip File. I tried to uninstall SP1 at one point, but it said it could not uninstall everything.

Windows Debuggers says this:

Loading Dump File [C:\Windows\Minidump\041211-70512-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?00000000`00000000?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: srv*n:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`03204000 PsLoadedModuleList = 0xfffff800`03449e90
Debug session time: Tue Apr 12 09:41:28.605 2011 (UTC - 4:00)
System Uptime: 0 days 0:21:38.620
Loading Kernel Symbols
...............................................................
................................................................
................................................................
... Read more

A:BSOD Driver Power State Failure

I have re-attached all the details, I realise the last one was incomplete.

Read other 5 answers
RELEVANCY SCORE 98

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hello,

I made a thread about this already but no one would reply can someone help me please? I really want to get rid of this BSOD
I want to know what the problem is, thanks

http://sdrv.ms/14ltYEj

edit: windows 8

A:Driver power state failure (BSOD)

I'm late for work, please post back in order to remind me to follow up on this topic (I get email notification when you reply)>

Make sure that you have ALL available Windows Updates
While waiting, start with these free diagnostics: Initial Hardware Diagnostics

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Aug 1 14:52:25.525 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\080113-27580-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 4:29:58.649
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
Probably caused by :amd_sata.sys
BugCheck 9F, {3, fffffa800e4515a0, fffff80017199770, fffffa800e4407b0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800e4515a0, Physical Device Object of the stack
Arg3: fffff80017199770, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800e4407b0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_disk_IMAGE_amd_sata.sys
BIOS Version 1503
BIOS Release Date ... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hi all, I'm on Win 7 RTM 64 bit and have been getting driver power state failure BSoDs when trying to go into standby mode. It doesn't always BSod, sometimes it actually goes int standby, but when it fails, the monitor turns off, the fans slow down, but the computer remains on for about 5 minutes until it eventually gives a BSod. I upgraded from Vista Ultimate 64 bit about a week ago and my other problems have been solved, but the solution to this BSoD still eludes me.
I've updated all my drivers to their newest releases, made sure there are no bad drivers in device manager, and checked for unsigned drivers. The only unsigned driver I have installed is the one I forced to install, XBCD.
Attached is my minidump in zip from.
Thanks in advance.

A:Driver Power State Failure BSoD

A quick look seems to blame your Marvell Yukon drivers (yk62x64.sys) - although the Realtek networking driver (RTKVHD64.sys) on your system are very old also (Oct 07).

I would suggest downloading fresh copies of the above drivers from the Marvell and Realtek websites. Then uninstall the current one's and install the new one's.

I'm unsure about the forcing of the XBCD driver - and would recommend uninstalling it until this problem is resolved.

If you still run into problems then I'd first suspect a hardware issue with the network card - although it's still possible for other drivers/programs to affect this. If you're still getting errors after updating the drivers - then please provide the information requested in this post: http://www.techsupportforum.com/1871981-post2.html

Here's the memory dump analysis:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR-RC1-Desktop\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c550?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7100 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7100.0.amd64fre.winmain_win7rc.090421-1700
Machine Name:
Kernel base = 0xfffff800`0305b... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hello, I have had numerous BSOD's with different messages but this is my most recent one.

I have created the zip files requested in another related post. Please let me know if there is anything else needed.

Any help would be greatly appreciated, the problem is very frustrating.

Thank you,
Derek

A:BSOD - Driver Power State Failure

Hi -

I count 28 BSODs that you have had since installing Windows 7 RC on August 3, 2009. There were only 8 dumps in the zip file. I assume the other 20 were removed as a space saving measure.

The "mini" kernel dumps are by far some of the largest that I have seen -- especially for a Windows 7 x64 system. Each weighs in at just around 800k. Average is ~ 275k.

The bugcheck on the dumps is as your thread title suggests = 0x9f

0x9f (0x3,,,) = a device is blocking an IRP longer than permitted causing a driver to be in an "inconsistent state of power". The device in question is hogging the IRP, other devices cannot access it that need to; a stalemate ensues with no way out - and thus the BSOD. Either way, you lose.

IRP = I/O Request Packet

More on IRPs ---> http://en.wikipedia.org/wiki/I/O_request_packets

The non-Microsoft driver that shows up the most in the dumps as a probable cause of the BSODs is your NIC Intel Ethernet driver. I know it is the most recent one available -

Code:

e1e6232e.sys Fri Jun 05 12:08:41 2009 (4A296D39)

This driver has shown up in BSODs of others. I'm not sure of the product it belongs to. I would uninstall the relating product at least for now -

Code:

VSO Software
pcouffin.sys Tue Dec 05 06:39:30 2006 (457584A2)


I found 241 app crashes similar to this IE 8 crash going back to the day Windows 7 was installed -

Code:

Event[2]:
Log Name: Application
So... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hi all, I have been getting BSOD increasingly frequently with a message about Driver State Power Failure. I have had to recently re-install vista home premium service pack 2 after the system would not boot. My system is an Intel E7200 with 4 Gig of ram and is running a 32 bit operating system. The system is around 2 years old and is built into a cooler master centurion case and power supply. Any help would be much appreciated.

Thanks
Scott

A:BSOD Driver State Power Failure.

Hi Scott -

All 26 BSODs named Realtek Ethernet as the probable cause -

Code:

Rtlh86.sys Tue Sep 26 07:20:27 2006 (45190CFB)

Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC --> http://www.realtek.com/downloads/dow...&GetDown=false

ESET NOD32 -

Code:

ehdrv.sys Tue Sep 29 06:52:16 2009 (4AC1E6E0)
eamon.sys Tue Sep 29 06:51:42 2009 (4AC1E6BE)
epfwwfpr.sys Tue Sep 29 06:46:24 2009 (4AC1E580)

Update the ESET program installation - v4.2.64.12 --> http://www.eset.com/download

Update this app or remove it -

Code:

pdihwctl.sys Tue Dec 10 00:26:44 2002 (3DF57B14) - Portrait Displays, Inc. - http://www.portrait.com/enu/index.html

Portrait Displays --> http://www.portrait.com/enu/index.html


If BSODs persist, run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.com/dbug_logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.com/dbug_logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 6002.18267.x86fre.vistasp2_gdr.100608-0458
Debug session time: Sat Sep 11 07:05:44.324 2010 (GMT-4)
System Uptime: 0 days 22:03:21.434
*** WARNING: Unable to verify timestamp for Rtlh86.sys
*** ERROR: Module load completed but symbols could not be loaded for Rtlh86.sys
Probably caused by : Rtlh86.sys
DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello,

i have started to get BSOD on the last couple of days. I can't think of anything newly installed or changed that might cause this. I hope that maybe you can find whats wrong from the information that I have attached.

Thanks in advance
Best regards
John

? OS - Windows 7 Ultimate SP1
? x64
? Original os Windows XP.
? retail
? Age of system less than two years
? Age of OS installation less than two years
? CPU - Intel Core2 Duo T9600
? Video Card - Nvidia Quadro NVS 160M
? MotherBoard - unknown
? Power Supply - unknown
? System Manufacturer - Dell
? Exact model number Latitude E6500

A:Driver power state failure BSOD

Hello,

It seems your Dell HSPA drivers are causing the issue. Try uninstalling the drivers for now, and if you really need the device, install these ones: Drivers and Downloads

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue Aug 9 16:32:04.422 2011 (UTC - 4:00)
System Uptime: 0 days 23:44:45.475
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
FAILURE_BUCKET_ID: X64_0x9F_3_ANALYSIS_INCONCLUSIVE
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 8 15:05:25.831 2011 (UTC - 4:00)
System Uptime: 0 days 8:29:32.160
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for d554gps64.sys
*** ERROR: Module load completed but symbols could not be loaded for d554gps64.sys
*** WARNING: Unable to verify timestamp for d557bus.sys
*** ERROR: Module load completed but symbols could not be loaded for d557bus.sys
Probably caused by : d557bus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: vlc.exe
FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_d557bus.sys
BiosReleaseDate = 07/30/2010
SystemProductName = Latitude E6500
??????????????????????????????????????... Read more

Read other 2 answers
RELEVANCY SCORE 98

My computer slow down and ... BSoD with a Driver Power State Failure message. Can someone help me.

Vista Ultimate 64bits,
minidump

Read other answers
RELEVANCY SCORE 98

I am getting this BSOD at random times when i am browsing or listening to songs.
The mouse freezes for 5 secs and then the screen goes blue and the only thing i can see is Drive State Power Failure and rest i couldnt read
i have attached the dump files pls help me out

A:BSOD Driver State Power Failure

There is no DMP Files attached in the Attached Files.

Dump Files - Configure Windows to Create on BSOD

Read other 3 answers
RELEVANCY SCORE 98

Hello everyone,

My PC was running flawlessly until I woke it from sleep one day to find out that the USB keyboard and mouse and all other USB ports are not working. I figured ok I'll just restart. Well the restart hung at "Shutting Down..." for 5 minutes+ before I got a BSOD and the system eventually rebooted.

This happened a couple of times so I thought I should update all USB drivers and I did download the latest Intel drivers and installed them. This fixed the USB ports freeze after sleep wakeup, but if I use the PC after that for 5-10 minutes, I'll get a BSOD again which you'll see in the attached zip file.

In device manager, I was seeing an error with a driver called wirelesskeyboardfilter_01, but i researched that and found it had to do with HP drivers and I don't have any. I even followed a Microsoft article to fix wirelesskeyboardfilter_01 but the problem persisted.

I would like to know which driver is causing the BSOD so that I update it/fix it.

I did a memory test and it came back with no errors and in advanced power plan settings, USB selective suspend setting is Disabled.

I would really appreciate your help and I thank you in advance.

Read other answers
RELEVANCY SCORE 98

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98

I have been using my new machine for a little over two weeks now. Twice I have come to sit down at the machine in the morning and the laptop display would correctly illuminate, while the external monitor would not. None of the windows on the screen were responsive to mouse clicks and the machine was not responsive to any of the keys on the keyboard. The mouse cursor would move.

Today I eventually got a BSOD:
DRIVER_POWER_STATE_FAILURE
STOP 0x0000009F (xxx1, xxx2, xxx3, xxx4)

I preserved the minidump and captured sysinfo. They are attached.

Any suggestions or thoughts?

A:9F: Driver Power State Failure BSoD

The dump file blames monitor.sys (a part of Windows Vista) - so I would suspect your video sub-system at this point. I would start with updating any video drivers/video related software on your system.

I notice that you had Visual Studio crashes - are you running any custom programs?

I would suggest running SFC.EXE /SCANNOW from an elevated (Run as Adminstrator) Command Prompt also.

Here's a list of outdated drivers on the system. I would update them also (NOT from Windows Update):

Code:
AtiPcie.sys Mon Nov 06 11:59:54 2006 - AMD PCIE Filter Driver for ATI PCIE chipset - AMD PCIE Filter Driver - Advanced Micro Devices Inc. (I think that this is most likely the problem)
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant modem driver
rtlprot.sys Fri Apr 20 05:16:48 2007 - Realtek WLAN driver
tdcmdpst.sys Mon Dec 10 21:29:00 2007 - Toshiba ODD Writing Driver
Thpevm.SYS Mon Sep 03 21:13:06 2007 - TOSHIBA HDD Protection - Shock Sensor Driver
tos_sps64.sys Thu Nov 15 00:12:58 2007 - TOSHIBA tos_sps64 Service
TVALZ_O.SYS Thu Nov 08 22:08:41 2007 - TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver
Memory dump:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/d... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi Everyone,

Got a BSOD yesterday and want to see if you guys could help me isolate the issues. This is my first BSOD in about a week.

Actually, things used to be alot worse like a week ago, I was getting random BSODs due to the installation of a Belking Wireless Adapter. I thought I had everything resolved by uninstalling the drivers and then reinstalling under windows XP because I haven't had a BSOD since then.

Anyways, I am running Windows 7 and would appreciate any help.

Thank you,
Abad

A:BSOD Driver Power State Failure

Hi,

Got the correct files for you to look at.

Thanks again.

Read other 2 answers
RELEVANCY SCORE 98

New Computer Setup. Seemingly Random BSODs several times a day.

At first it was just happening when playing games, or running AUTOCAD. But now it just crashed while watching Hulu. I tried reinstalling all drivers I could think of and even did a whole system wipe with no luck.. still BSing.



I've attached my Seven Forums .zip as instructed.

From Mini-Dump:
Loading Dump File [C:\Users\iJoeTime\Desktop\073112-12901-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00210842?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`0175a212?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03007000 PsLoadedModuleList = 0xfffff800`0324b670
Debug session time: Tue Jul 31 19:55:46.086 2012 (UTC - 7:00)
System Uptime: 0 days 22:31:20.914
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
..........
**************... Read more

A:BSOD - Driver Power State Failure

Please fill out your system specs. Click the link in my signature to do it.

Read other 9 answers
RELEVANCY SCORE 98

Hi all,

Since I installed Win 7 64 bit Home on my HP 6735s laptop (originally Vista 32 bit) I keep randomly getting the DRIVER_POWER_STATE_FAILURE, it's just random so I wonder if you can help.

I also never got this in Vista though I have swapped the network card for HP's recommended Wireless N card.

? OS - Windows 7
? x64
? Original OS Vista 32 bit
? Original OS was OEM, new is Full Retail
? Approx 2 years old
? Age of OS installation - When Win 7 came out, Oct last year? Never been reinstalled.

Will attach the requested files :)

Cheers,
Paul.

A:[BSOD] Driver Power State Failure Win 7 x64

...and the perfmon file :)

Read other 9 answers
RELEVANCY SCORE 98

Morning, all.

I could use a bit of help--I've been having a number of BSODs lately, and they always relate to a driver power state failure. Doing my own research has not really been as productive as I'd like.

Of note: this really only happens when I open the laptop back up after leaving it alone for some hours (when I wake up, and occasionally when I get back from work). The computer will run fine for about 5-10 minutes, and then I get a BSOD. I'm running Vista, SP2, on a Dell Inspiron 1525--haven't really had any major problems with this before.

I'm attaching a zip of the minidump and the msinfo32 file as I saw requested in another thread. Many thanks for any help!

Best
writingmiles

A:BSOD and Driver Power State Failure

For more specific troubleshooting, please follow the blue screen posting instructions to provide your full reports.http://www.techsupportforum.com/foru...ta-452654.html
Crashes point to your M-Audio KeyStudio device and/or its drivers. It is conflicting with your PreSonus Inspire WDM device and/or its drivers.

-----

Read other 2 answers