Over 1 million tech questions and answers.

Corrupted Files + Unable to Repair + Corrupted Source

Q: Corrupted Files + Unable to Repair + Corrupted Source

So, I reformatted my computer again. Did some SFC scans before I installed any Microsoft updates and all scans were clean. Did all the updates, drivers, program installations. Couple days later I decide to check with SFC and found some errors. There's also errors at the source, meaning I can't replace them correct? This seems kind of stupid. Always having corrupted files no matter how many times I reformat.

RELEVANCY SCORE 200
Preferred Solution: Corrupted Files + Unable to Repair + Corrupted Source

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Corrupted Files + Unable to Repair + Corrupted Source

Hello ecko69x

From the last entry in your report below, it looks like they have been repaired, and you are good to go.

"Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired"

Read other 7 answers
RELEVANCY SCORE 92.4

I recently got some work done on my machine at a "PC fixit" store. It was unbootable due to an encryption issue that I had created, so as part of the service, they loaded Ultimate on it.

When I got the machine back, it worked fine, but I couldn't shut it down without holding down the power button (would always reboot). I seem to have fixed that issue.

I still don't have any issues with my machine, but when I run scannow (many times) I get errors about seemingly important files, but I can't tell if I have cause for concern, or what the next steps should be, since I don't have any way to replace the corrupted files.

I would prefer not to have the OS reloaded.

Any help is greatly appreciated!

A:SFC /scannow reports 6 .mui source files corrupted in store

Welcome to Seven Forums, jcsherr.

Two possibilities come to mind. First, if the fixit shop is legitimate they should have no problem taking another look at the machine to see if they did something wrong. Especially if they gave you a limited warranty that might still be in effect. The second possibility is a Repair Install. A repair install should fix your currently installed Windows 7 and preserve your user accounts, data, programs, system drivers, etc.

Repair Install

Couple of questions: Am I understanding that as part of the service your computer was upgraded by the fixit shop to Ultimate? That your machine originally had a different version of 7 on it? Did the shop provide you with installation media (DVD) containing Ultimate? How did they validate Ultimate with Microsoft? Sometimes repair facilities use a Volume License Key to validate the operating system. Sometimes the Key turns out to be ... umm ... suspicious to Microsoft and eventually fails. Then one day the user gets a "not genuine" message. So these are just a couple of things you might want to discuss with the fixit shop.

Read other 6 answers
RELEVANCY SCORE 89.2

Recently, i accidentally forced the shutdown of my computer that's using windows 8.1. Since, i have corrupted files and I want to fix them. But, when i execute the dism /online / cleanup-image /restorehealth command, It gives error 1276. It also says that the the remote procedure call failed... But before i did this more than 3 times and i never had problems. Between the 2 procedures, i installed no new program .

A:How do we repair corrupted files?

Thanks for all of your answers, but i tried again and it worked! I will keep the page open so that other people like me could find answers to fix this problem! Don't hesitate to share your knowledge even if everithing went fine for me!

Read other 3 answers
RELEVANCY SCORE 89.2

Hi, have some files corrupted and can't repair.

Logs.rar

Maybe the images both online and offline from TechBench/Media Creation Tool aren't updated since the update came out yesterday...

In my Laptop i have only opencl.dll corrupted.

A:Have some files corrupted and can't repair

Hello Be4stElectrjc,

The corrupted opencl.dll file is a known issue with SFC that will hopefully be sorted soon. It's nothing to worry about.

Microsoft Fixing opencl.dll issue in SFC /SCANNOW soon

Read other 3 answers
RELEVANCY SCORE 89.2

Hello,

I have winxp on a 80gig hd which is missing the ntldr file.

I used the 6-floppy disk Microsoft Home Edition WinXP Boot Disks mentioned on bootdisk.com to get to the recovery console.

Once there i tried to copy ntldr and ntdetect.com from a floppy to my c:\ drive only to get this message: "en error occured during directory enumeration".

I tried to create a directory to copy the two files into (mkdir c:\i386) and recieved a message stating that my mbr was corrupted.

Using two files from the 6-disk boot, fixboot and fixmbr, i tried to fix the mbr only to have kept the same problem... neither worked at all.

Is there a way to fix a corrupted mbr and keep important files that were on the harddrive from being erased?

I am hoping for a repair of xp not a clean install. Files on the computer belonged to my father and are not replacable at all, no other copies made... i was unaware of the fact that he had not made backup copies. That lesson is a hard one this time.

Traifin
 

A:mbr corrupted; will repair dlt old files?

Read other 16 answers
RELEVANCY SCORE 89.2

Hi Everyone [sry for my bad english]
a week Ago I get some virus , that make my files corrupted , and make my images look like **** ! and make my installation Files [ That i downloaded ] corrupted !



it made my pictures look like this :









but i think i fixed this virus by kaspersky anti virus and no more files are getting corrupted , but my question is this :
is there any way that i can fix these corrupted Files ?
like my pictures or my installation Files ? because when i want to install that program it say this file is corrupted !

Plz help !

A:Plz Help Me ! How To Repair corrupted Files

that looks more like a damaged graphics card than anything else.

Read other 5 answers
RELEVANCY SCORE 88.8

Hello all,

My copy of Windows 7 Home Premium x64 on my laptop has been having some strange issues lately. I cannot run .msi files, and device manager never populates a full list. Sometimes (rarely, but it does repeat) Windows Explorer will freeze, and if I attempt to close it and reopen it using task manager, the UI reloads, but whenever I click on a folder it claims Windows cannot load explorer. Restarting fixes that. I scheduled and ran CHKDSK, and it repaired a few bad sectors, but it didn't fix any of these problems. I have run CCleaner (both the regular cleaner and registry fixer) and defragmented my hard drive until it's only 1% fragmented. I then tried sfc /scannow, and it read a bunch of corrupted files but could not repair them. I read that to fix sfc, you must download and run Windows System Update Readiness Tool. It has been running and "Searching for Updates on this Computer" for about an hour now, and I'm getting concerned that it's just not doing anything. It's not frozen, the bar keeps moving from left to right and I can click on and off of it. I also have the logs from sfc if anyone wants to take a look at them, they'll be attached. The computer isn't very old, and has an intel i3 and 4gb of ram. If you would like any extra information to help, please reply and I'll get back to you as fast as I can Any recommendations on where to go from here would be greatly appreciated.

Thanks so much for any and all help!

A:Many corrupted Windows7 files, SFC reads corrupted data but doesnt fix

Hi Qujibo,
First comment you said ran ccleaner REGISTRY cleaner, this is not advised, unless you know what your doing

If there is an UNDO backup from that utility RUN it.

SURT can quite easily run for a couple of hours.

There are a lot of Winsxs errors in your log.

AFTER surt has run

REBOOT

run the MXdiag report from this link
Windows Genuine and Activation Issue Posting Instructions

Was this OS only installed via sysprep a couple of days ago??

Roy

Read other 2 answers
RELEVANCY SCORE 88.4

Hello and welcome Cocaine mate can you follow these please so we have that BSOD dump?
Dump Files - Configure Windows to Create on BSOD
&
Blue Screen of Death (BSOD) Posting Instructions

Read other answers
RELEVANCY SCORE 88.4

Hello,

Recently I sent my laptop to apple mainetenance to repair after the hard disk failure. then I sent the failed HD to a guy who extracted all my files including videos, but there's some video I cannot open, I think they are corrupted. for example when I try to open one .mov file with quicktime the attached error message appears. is there a tool to fix or repair corrupted video files ?

Thanks
 

A:How to repair corrupted video files ?

I suspect the HDD was corrupted at some point in this process or as a result of the failure. In any case, file recovery software restores files based on the FAT. If the FAT or the data on the disc is corrupted (neither is checked by the recovery software), then the recovered/restored files are typically corrupt as well. And in this case, the data is typically garbage and not the actual file data. Thus it cannot be "fixed".

Having said all of that, try opening the files with a program such as gSpot or MediaInfo. If the files can be properly identified, then you can likely fix the problems.

Most likely, the "files" won't be properly identified. Thus they are simply trash.
 

Read other 1 answers
RELEVANCY SCORE 88.4

Hi Everyone [sry for my bad english]
a week Ago I get some virus [I Think It Was A Trojan Called : Torjan KillFiles] , that make my files corrupted , and make my images look like ShiiT ! and make my installation Files [ That i downloaded ] corrupted ! And Make My Rar Files corrupted So I Couldn't Extract Them Anymore and ...



it made my pictures look like this :









but i think i fixed this virus by kaspersky anti virus and no more files are getting corrupted , but my question is this :
is there any way that i can fix these corrupted Files ?
like my pictures or my installation Files ? because when i want to install that program it say this file is corrupted !
Or My Rar Files That can be Extract anymore ! [ Because My PC say That these files are corrupted And Cannot be extract ]


It Even Effect On My Music Videos And Some Times When Im Watching Music Video , It will become like this more than 10 times :



Plz help !

A:How To Repair Files That corrupted By Trojan

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and
Quote:




Having problems with spyware and pop-ups? First Steps




a link at the top of each page.

Please follow our pre-posting process outlined below.

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

Read other 1 answers
RELEVANCY SCORE 88.4

Hello,
I have recently lost a number of local folders in my Outlook Express (OE) which I found in the DBX store. However OE does not read/open them most probably because they are corrupted. This is apparently a common problem.
I searched and found a few tools which claim to repair/recover corrupted DBX and I tried three demo versions. None of them was able to repair the corrupted DBX files. One of the tools was honest enough to admit that some files can be beyond repair and it provided a complete disk scan which recovered a number of lost/deleted messages, some of which were originally in the OE local folders i had lost. Although no fix so far, no cost in using the demo versions.
A number of experts suggest a tool called DBXPRESS which claims to recover corrupted DBX files. Unfortunately no demo version is offered for proof of effectiveness before purchase.
Are corrupted DBX files repairable as the softwar ecompanies claim and if so how and with what software ?
As this is a common and potentially disastrous problem, should not Microsoft be persuaded to provide a radical fix to avoid a tedious manual backing up process.

A:Repair/Recovery of Corrupted DBX files

This probably will not work but download MailViewer here. When you run it browse to your dbx files and see if it can view your mail. It doesn't repair anything but it may be able to view something. I used it to pull an attachment out of a saved dbx file without Outlook Express.
 
http://www.mitec.cz/mailview.html

Read other 2 answers
RELEVANCY SCORE 88.4

Hi all.
 
My computer was infected.
 
I have cleaned it completely, but many office and pdf files are corrupted and wont open. Even in another system.
 
I have tried many many repair programs that i in google searched but still no go.
 
Thanks for your help !

A:How to repair corrupted office and PDF files ?

Sorry you are having issues!
 
Honestly I am not sure, so this is just an idea...check the extension of the files and make sure they are still .pdf and .ppt or .doc. Sometimes when you are having issues, something could cause a change in the name of the file extension, and it will not open or if it is open, you are not able to save it (I had this happen yesterday in PowerPoint and something changed the file to a template extension .potx instead of .ppt).
 
After closing the application (Office or Adobe or other program), I would locate the file and check it has the right extension, and if not--change it manually. Sometimes changing the name of the file itself helps the application open it, so change the name of the file and/or extension if it is wrong and change the file name, then right click and attempt to Open With the correct program. 

Read other 2 answers
RELEVANCY SCORE 88.4

 Hi, in Windows Vista and 7,  Microsoft has change how ITs work on the os. I am a trainee of becoming a tech. I work at a computer store and my co-workers isn't fond of vista since cannot repair any files like xp "windows repair". For example, I working on a computer that cannot boot into windows (vista). I have tried start-up repair, (didn't work), I tried the restore (didn't work), safe-mode (lets say it don't for now). Question is, How to get back in windows to boot? The main reason for asking is to apply this knowledge at work and maybe be promoted and/or pay raise. Thanks for reading and God bless you.-Joshua

A:How to repair corrupted system files?

 
Hi Joshua, in order to repair corrupted system files, you can also use the following steps:
 
Use the System File Checker (SFC) to scan system files
=====================================================
The System File Checker tool enable an administrator to scan all protected files to verify their versions. To do so, follow these steps:
 
1. Click "Start", type "CMD" (without quotation marks) in the "Start Search" box. Right click on the "CMD.exe" file, choose "Run as Administrator"
2. Copy and paste "SFC /Scannow" (without quotation marks) in the "Open" box, and click "OK".
 
Note: There is a SPACE between "SFC" and "/Scannow", this command will take several minutes to complete and may require access to the Windows installation source files.
 
You can also refer to the following link for detailed information:
 
Using System File Checker (SFC) To Fix Issues
http://blogs.technet.com/askcore/archive/2007/12/18/using-system-file-checker-sfc-to-fix-issues.aspx
 
Hope this helps!Sean Zhu - MSFT

Read other 5 answers
RELEVANCY SCORE 88.4

Hello,

After getting infected and buying an antvirus and clenaed my system i run "sfc /scannow" and it says some protected system fiels are corrupted but its not able to fix them.

Any idea as to what needs to be done plase?

A:SFC cannot repair my corrupted system files

Originally Posted by nikos


Hello,

After getting infected and buying an antvirus and clenaed my system i run "sfc /scannow" and it says some protected system fiels are corrupted but its not able to fix them.

Any idea as to what needs to be done plase?



Try running:

Dism /Online /Cleanup-Image /RestoreHealth

in administrator command prompt:

Then reboot & run sfc again.

Read other 20 answers
RELEVANCY SCORE 88.4

Hello to everyone,
I am new here & looking for help with a computer issue. Any help given is greatly appreciated. I'll start from the beginning.
For awhile now but only very occasionally I am getting BSOD crashes & then the computer restarts. So today I decided to do some detective work & try to find out/repair what is going wrong. I ran SFC /SCANNOW & it returned a message that some corrupted files could not be repaired. So then I found some help online & ran it several more times. It returned the same message each time. I also did the Windows Update Readiness Tool, & that also did not fix the problem. A lot of the online help forums seem to mention doing a repair install however I do not want to resort to this unless I have to. First of all, I do not have an install disc. Then I read that it is always better to have your install disc directly from your computer's manufacture instead of making your own. So if I do have to do a repair install I will probably want to order a disc from Dell instead of making my own. Also my computer is relatively young (at least in my mind) about 1.5 years old, however my nephew does a lot of gaming & the computer does get a lot of use that way. I had my previous Dell for 8 years & it only got wonky near the end.

Here is the CBS file: (the unfixable file is near the end) THANK YOU to anyone who helps!


Code:

2014-01-15 17:26:48, Info CSI 000001aa [SR] Beginning Verify
and Repair transaction
2014-01-15 ... Read more

A:Scannow cannot repair corrupted files

Hello deshae, and welcome to Seven Forums.

Since you are having a BSOD issue, I would recommend to read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back in the BSOD Help and Support forum area with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 3 answers
RELEVANCY SCORE 88.4

Hello everyone!sfc can't rapair missing/corrupting files..I had blue screen few days ago, in events log -one critical error from last week , but more same errors from months. (Kernel-Power ID 41 {63})Also there are many smaller errors (Kernel-EventTracing ID 3 / atapi ID 11 / Application Errors / BugChecks etc)Can some1 help? I can upload more logs.Thank's !

Read other answers
RELEVANCY SCORE 88

Hello,
today I am posting in the Eight Forums to ask about how to fix a corrupted looking Windows 8 start menu with no corrupted files found. I know that's a really bad way to explain the situation. I have uploaded a screenshot which I hope explains the issues. I wanted to add the blank squares do not work and also the Maps button.
Thanks
Emaunel

A:Windows 8 Start Menu Looking Corrupted; No corrupted files

Repair the start screen, see here:

Apps and Tiles Not Working or Responding: Fix in Windows 8

Read other 1 answers
RELEVANCY SCORE 87.6

Hi... While using Incredimail, it crashed and corrupted all of my email files... meaning that I lost all of my existing emails. I had some very important stuff and am searching for a software program that can repair the files. The file extensions are imm and imh, and I am running Windows XP. I've already tried their tech support and they were not able to repair the files. Any help would truly be appreciated. Thank you in advance...
 

A:Incredimail Files Corrupted-Looking for software to repair them

Read other 7 answers
RELEVANCY SCORE 87.6

Unfortunately, all folders and files just got corrupted. I can still access all folders and also see the files, but I can no longer open them. The disk includes around 1,000 files of movies and photos.

The folders on the disk include a small "lock" symbol suddenly. No idea what this means.

I had run a chkdsk /f and chkdsk /r. Both finished without any errors. /r took almost a day to finish.

Thanks for any idea you may have!

A:Win7x64 - repair corrupted files / folder

One answer I found:

It means that the Users group doesn't have access to the folder. Adding even Read authority to the Users group will remove the lock.

Read other 1 answers
RELEVANCY SCORE 87.6

Hi,

I have hit a brick wall and would really appreciate some help.

Recently I noticed my IE9 opening really slowly (about a minute until loading page). I ran Malwarebytes, Avast, Chkdsk/f/r, sfc/scannow and I have now ended up with this;



From this log I have identified these errors:-

2014-03-04 14:09:27, Error CSI 00000080 (F) STATUS_OBJECT_NAME_NOT_FOUND #1550655# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = (AllowSharingViolation), handle = {provider=NULL, handle=0}, da = (STANDARD_RIGHTS_READ|FILE_READ_ATTRIBUTES), oa = @0xe0e80c->OBJECT_ATTRIBUTES {s:24; rd:NULL; on:[120]"\??\C:\Windows\WinSxS\x86_microsoft-windows-b..iondata-cmdlinetool_31bf3856ad364e35_6.0.6001.18000_none_882afcc5a52ba04b"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xe0e82c, as = (null), fa = 0, sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = 0x00004000, eab = NULL, eal = 0, disp = Invalid)
[gle=0xd0000034]
2014-03-04 14:09:27, Error CSI [email protected]/3/4:14:09:27.514 (F) d:\longhorn\base\wcp\sil\merged\ntu\ntsystem.cpp(1849): Error STATUS_OBJECT_NAME_NOT_FOUND originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
[gle=0x80004005]
2014-03-04 14:09:33, Error CSI 00000082 (F) STATUS_OBJECT_NAME_NOT_FOUND #1550654# from Windows::Rtl::SystemImplementation::CDirectory::OpenExistingDirectory(...)[g... Read more

A:sfc /scannow reports corrupted files, but cannot repair

Hi and Welcome to TSF!

If you have the Windows Vista installation disc or Repair disc you can boot from that. After booting to the disc you can run Windows Startup Repair to repair those files.

SFC cannot find them or they are too corrupt. They will however be located on the disc.

Read other 2 answers
RELEVANCY SCORE 87.6

Hello to all, i have some problems with my PC (Windows 7 64-bit config complete in my system spec.). I saw some problems doing scans with Microsoft Essential, ADaware..the scans blocked and not complete.
So i run the CMD and i checked the integrity of files, it has found files corrupted and not possibile repair. I attach the CBS log: can someone help me? Thanks!

A:SFC scannow - corrupted files impossible to repair

Hi,
Not many if any people here are going to look at a .rar attachment,
Please post a .txt attachment

Read other 9 answers
RELEVANCY SCORE 87.6

Hello,
I am using Windows 8 (64-bit version) and have recently had a virus which I have quarantined and removed. After restarting my computer it seemed that Windows 8 was taking ages to boot around 3 minutes compared to it's usual half minute start up and login.

Searching online I found that you should scan in elevated command prompt using sfc/scannow. After reaching 100% a message came up stating "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log %WinDir%\Logs\CBS\CBS.log."

I have already looked into it searching with the word "corrupted" and "fixed" not finding anything. This code: findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt and thread "http://www.sevenforums.com/bsod-help-support/55984-how-analyse-cbs-log.html" resulted in an empty file. Also forgot to add that Windows 8 Advanced Repair was no help either.

I have also attached the CBS.log as a .txt file if that helps.
Thanks for looking at this post, any support would great.
Emanuel

A:sfc/scannow Could not repair corrupted files; CBS.log not showing any

bump

Read other 6 answers
RELEVANCY SCORE 87.6

Hi guys.
When I try and mount an .iso explorer freezes and locks up. I've tried setting default programs, changing file associations, installing different image software like Poweriso, Dameon Tools etc., nothing works. I simply cannot handle .iso files for some reason. Can anyone help? Thanks,
Chris

A:.iso Associations corrupted. Cannot mount .iso files !! Cannot Repair!

Running sfc /scannow from an admin command prompt is worth a try first for problems like these. Otherwise, you can try System Restore from a previously working state, restore from backup (you do have one?) or a repair install of Windows.

Read other 1 answers
RELEVANCY SCORE 87.6

Win 7 starts ok but sfc reports corrupted files Cbs Log attached.

Any advice will be appreciated

A:sfc and startup repair found corrupted files but can't fix

Hey, there is a known issue with a recent Windows Update (KB3022345), it causes an irrepairable corruption warning (which is a false report, the files are not corrupt in reality). If you have this update installed then do one of the following:
- Uninstall this update (it is Windows 10 preparation update)
or
- Run the fix from The Tech Cookbook – Windows 7 update (KB3022345) causing corrupt files

After the above, run another SFC /scannow. If you still get a corruption, attach it in your next post.

Read other 2 answers
RELEVANCY SCORE 87.6

2015-05-13 15:49:10, Info                  CSI    0000000a [SR] Verifying 100 (0x0000000000000064) components
2015-05-13 15:49:10, Info                  CSI    0000000b [SR] Beginning Verify and Repair transaction
2015-05-13 15:49:11, Info                  CSI    0000000c [SR] Verify complete
2015-05-13 15:49:11, Info                  CSI    0000000d [SR] Verifying 100 (0x0000000000000064) components
2015-05-13 15:49:11, Info                  CSI    0000000e [SR] Beginning Verify and Repair transaction
2015-05-13 15:49:12, Info                  CSI    0000000f [SR] Verify complete
2015-05-13 15:49:12, Info                  CSI    00000010 [SR] Verifying 100 (0x0000000000000064) components
2015-05-13 15:49:12, Info                  CSI    00000011 [SR] Beginning Verify and Repair transaction
2015-05-13 15:49:13, Info                  CSI    00000012 [SR] Verify complete
2015-05-13 15:49:13, Info                  CSI    00000013 [SR] Veri... Read more

A:SFC /SCANNOW Corrupted files wont repair

Hello,Please follow the steps here:http://thetechcookbook.com/windows-8-update-kb3022345-causing-corrupt-files/

Read other 5 answers
RELEVANCY SCORE 86.4

Hi All

I bought a new windows 7 home basic edition. I tried installing windows 7 on my laptop after formatting the disk. During the 2nd step of installation Install windows ->Expanding windows it says files may be corrupted please ensure all the files exist before installation.

Please help, I have formatted my laptop and in a total mess.

cheers

A:Corrupted CD, getting an error as corrupted or missing files

I wiped the CD with a piece of cloth and tried again
it worked.
Thanks

Read other 1 answers
RELEVANCY SCORE 86

Hello,
 
First of all, sorry if I have posted in the wrong forum. Last night, I shut down my computer, and it locked (Win+L). I am certain that I clicked "Shut Down" instead of "Lock". This morning, I ran "sfc /scannow" and it repaired a couple of files. However, it did not repair some files. I got a log file from following the instructions at http://support.microsoft.com/kb/929833/en-us#CBS log, however I don't know where to go from here. Thanks!
 
Log: http://pastebin.com/9sstDu1M
 
I am running Windows 8.1 (with all updates) and I am on a HP Pavilion dv7-6c43cl.

A:SFC was unable to fix corrupted files

Hello there,
 
Please try opening an elevated (right-click and select run as admin) command prompt and typing in the following:
 Dism /Online /Cleanup-Image /RestoreHealth
 
Try to then run SFC again.

Read other 17 answers
RELEVANCY SCORE 84.8

Like the titlte says. I ran the sfc /scannow command, but Windows was unable to fix the corrupted files. What do I do now?

Read other answers
RELEVANCY SCORE 84.8

I have been looking everywhere to fix the corrupted files that didn't get fixed in my sfc scan. I have attached the sfcdetails to the thread. If anyone could help me out it would be greatly appreciated. Thanx

A:Unable to fix corrupted files after SFC scan

Sometimes they just can`t be fixed, and you`re left with no other option but to re install windows.

Have you run it at least 3 times ?

Read other 6 answers
RELEVANCY SCORE 84

As I said I ran sfc /scannow and it found corrupted files. I don't have any idea how to fix them so please take alook. I would appreciate any help

A:Sfc /scannow found corrupted files and unable to fix them

Hey, there is a known issue with a recent Windows Update (KB3022345), it causes an irrepairable corruption warning (which is a false report, the files are not corrupt in reality). If you have this update installed then do one of the following:
- Uninstall this update (it is Windows 10 preparation update)
or
- Run the fix from The Tech Cookbook – Windows 7 update (KB3022345) causing corrupt files

After the above, run another SFC /scannow. If you still get a corruption, attach it in your next post.

Read other 2 answers
RELEVANCY SCORE 84

I have Windows 8.1 Pro and a HP Envy Notebook. I am able to boot into Windows and had no apparent problems when everything froze up yesterday while working in Quicken. After waiting several minutes with no change and and unresponsive keyboard and touchscreen, I pressed control/alt/del, and I got a (blank) BSOD. After waiting several more minutes, I pressed the button down for several seconds to turn off the notebook, removed battery, reinserted battery and then turned the the notebook back on. After rebooting into Windows, there were no apparent problems. I decided to run sfc scannow and discovered that there are several corrupted files that cannot be repaired. I ran the scan several times, rebooting each time, but the corrupted files persisted. Where do I go from here? Thank you.
BTW, in the Event Viewer there were no application errors. I did see several MCUpdate errors which began on 7/9 (today is 7/14). Again, thank you for any help. I'm not very computer literate, so I have no idea where to go from here and am hoping I do not have to do a reinstallation. I do have the HP rescue discs, however, that I burned when I got the computer, along with a thumb drive that enables me to boot up, although, again, I have no problem booting into windows.
I use Firefox, never Windows Explorer FWIW. Thanx.

A:Windows 8.1 Pro sfc /scannow unable to fix corrupted files

Type this into an elevated command prompt:

Dism.exe /Online /Cleanup-Image /StartComponentCleanup&sfc/scannow&Dism.exe /Online /Cleanup-Image /RestoreHealth&sfc/scannow&pause

Tell me the results.

Read other 37 answers
RELEVANCY SCORE 83.2

Hi. Two days ago, I transfered a large amount of files, mostly music, from an external hardrive onto my laptop. Today, I noticed an error message shown with a triangle next to the clock on my screen saying "aolload.exe - Corrupt File." I ignored this, and later got this message for various other programs. I finally decided to try running chkdsk through the command prompt, and then I got a "Corrupt File" message for this program.

This is very bothersome, is there anything I can do?

A:Corrupted Files, Chkdsk Also Corrupted.

If you have access to a Windows XP CD, boot from the disk and choose the option to use Recovery Console by pressing R
Choose your windows installation (if more than one listed)
Enter your Administrator account password. This is not necessarily the same password you use to login. If you do not know the password for this account, try pressing ENTER (i.e. Use a blank password)

Run CHKDSK from the command prompt.

N.B. Disconnect all external hard drives\flash drives before booting from the CD, as they often get labelled C: over your hard drive.

Read other 8 answers
RELEVANCY SCORE 83.2

When I log into the (at the time only) profile, it takes 10-20 minutes to load and then has a small thing that comes on and says a temporary profile has loaded. I restarted several times-no luck. I tried a registry edit (with .dat), but it did not work. I created two new administrator accounts and tried to copy the profile from the original to the 3rd account (while logged onto the 2nd account in safe mode). All looked fine-the files took about an hour and a half to transfer. But after the files finished, they did not show up at all under profile #3. I did a restart and logged into profile #3, but nothing is showing.

This is a Windows 7 laptop on a workgroup. Dell N5030. 64-bit OS.

A:Unable to transfer files from corrupted user profile

Hi did you follow the steps here Fix a corrupted user profile

Read other 1 answers
RELEVANCY SCORE 83.2

My computer recently slowed down a bit. The only problem is that booting up windows, takes long (>5min).
I did chkdsk and no errors were found. The next thing I did was sfc /scannow, it errored. I did it again errors weren't still fixed... I need a little help, thanks in advance.

As attachment I present sfc log text file: sfcdetails.txt

A:sfc /scannow - unable to fix corrupted files... Computer slowing down

I'm no expert reading sfc logs, but this is at the very end of your log.






Quote:
017-01-12 21:24:47, Info CSI 000006dd [SR] Repair complete
2017-01-12 21:24:47, Info CSI 000006de [SR] Committing transaction
2017-01-12 21:24:47, Info CSI 000006e2 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired


I would suggest that you reboot and run sfc /scannow again.
Every time you run sfc /scannow you need to reboot before starting another sfc /scannow.
Jack

Read other 2 answers
RELEVANCY SCORE 82

Hello guys.
 
Recently I performed a sfc/scannow on Command Prompt. It said it found some corrupted files but was unable to fix them. May I know if anyone of you knows how to read the log that it generates so that you can let me know what and how to fix those corrupted files?
 
Thank you for your help!

A:sfc/scannow - Windows Resource Protection unable to fix corrupted files

Click or tap on Search, then type cmd in the Search box.
 
cmd will appear under Apps, right click on it and in the options at the bottom of the page choose Run as administrator.  This will open the Elevated Command Prompt.
 
In the Elevated Command Prompt type in the following command followed by pressing the Enter key for each command.
 
DISM /Online /Cleanup-Image /RestoreHealth

Read other 20 answers
RELEVANCY SCORE 82

Hello,
I performed a system maintenance a few days ago and ran sfc to verify the system files. The utility found some corrupted files and repaired some of them. Then I ran the tool the 2nd time to check if no more corrupted files exist but it said found corrupt files but was unable to fix some of them. I exported the log but have no clue on which files are corrupted. Anyone can help to identify what are the corrupted files?

Thanks!

A:Help on finding corrupted files unable to fix by System File Checker

I had exactly the same problem as you and this is the aide-memoire I wrote myself while attempting to find the faulty files. In the end I said to myself "You have always wanted a SSD - why not buy one and build a new W7 on it". I never regretted the decision and I will NEVER have a PC without an SSD. I think the Digital River link has been taken down ...

My problem arose helping a friend with a nasty - I managed to get it on my PC and it changed ownerships and permissions on lots of files. Eventually MS refused to upgrade IE because it could not find? or could not delete? the segoe.ttf font to update it. So the rogue font files aborted the IE upgrade!

For what its worth ..

System File Checker tool (SFC.exe)

1. Cet a cmd window as administrator by Click Start > type cmd >, ctrl / shift / enter

Or click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. ***

2. Type sfc /scannow and press ENTER:

The sfc /scannow command scans all system files and will recover the corrupted ones.

3. Please restart the computer and recheck the original issue.

SFC logs it's actions to the C:\WINDOWS\LOGS\CBS\CBS.LOG. You can find the specific SFC entries by searching for the [SR] tags in the log.

THis is useful way to run sfc /scannow fixes, sfc /verify only lists all problems

Errors from running sfc /scannow or sfc /verifyonly (see http://support.microsoft.com/kb/929833 )

To determine which files could not be... Read more

Read other 1 answers
RELEVANCY SCORE 79.6

I keep trying to use my clonedvd, but when I do it tells me that the source file is corrupted. I have uninstalled it and tried to put it back in , but I can even reinstall it now. it says
an error occurred while trying to copy file: the source file is corrupted. I have no idea what to do I have contacted cloedvd, but they do not respond.
 

A:source file corrupted

You may not get a lot of CloneDVD help at TSG.

From the TSG Rules Page:

Category IV Offenses
Serious Crimes

... Furthermore, we do not allow instructions on how to complete illegal activities, such as pirating. Please don't ask for advise on using illegal software, as it will be removed.​
EDIT: Multiple posting of the same question is also frowned upon.
 

Read other 2 answers
RELEVANCY SCORE 79.6

My clonedvd has stopped working. It was telling me that the source was not in dvd format. I uninstalled it and now it will not let me put it back in when I try to install clonedvd it gives me an error message that says my source file is corrupted. Does anyone know how to fix this problem.
 

A:source file corrupted

Unfortunately we are not allowed to assist users with applications that can be used for copyright infringement and since the most common use of an application of CloneDVD is copying DVD movies I'll have to close this.
 

Read other 1 answers
RELEVANCY SCORE 79.6

Does anyone know I would be getting an error that reads your source file is corrupted?
 

A:corrupted source file

Dupe to this closed thread

http://forums.techguy.org/all-other-software/549589-source-file-corrupted.html
 

Read other 2 answers
RELEVANCY SCORE 78

Hello, I just recently formatted my hard drive and installed windows xp professional 64-bit and had no problem installing the automatic updates and all my drivers but then a couple restarts later after the installations i started receiving an error saying "The source file is corrupted" or "The cabinet file data1.cab is corrupt and cannot be used". I never had any problems like this on my windows xp home edition. Do you know how i might resolve this issue?

I have tried installing programs on different browsers, deleting all my temp files, and choosing a different download location.

Many thanks,

Cort
 

A:Source file corrupted/data1.cab corrupt

guess first question is why xp 64 bit its a) horrid b) not 32 bit xp home edition, did you do all the drivers? can mobo etc take a 64 bit driver for xp which is hugly out of date now? did you install sp1??
as you have disc you can attempt a repair and/or a file check start run type sfc /scannow or /scanonce so scans on boot

event viewer is in my opinion easier to use on xp than 7 so suggest look there also
 

Read other 3 answers
RELEVANCY SCORE 76.8

Hi Guys,

First post here. I'm very discouraged with my new pc. I just built my first rig from scratch and have been having lots of problems ever since a recent thunderstorm. I made the most idiotic mistake of all time and forgot to plug the PSU AC supply into the surge protector and had it right in the wall. When I came home the day of the storm I noticed the PC was in a strange reboot loop. It would try to power on, the fans and lights would activate for a few seconds and then it would power down. I was very concerned by this but managed to quit the loop by turning off the power supply completely.

The computer worked as normal for 2-3 days but then i started noticing it would hang at odd times when the cpu should not have been under particular stress. Eventually, by the next day the bootups were failing and trying to run startup repair unsuccessfully. I also got messages that files were corrupted. I was unable to boot up in start mode or run a system restore.

I then proceeded to use a Ubuntu Linux Live disk and was able to get to my files and back everything up. After this, I ran a clean install of the OS.

A day or two went by and I noticed similar problems, system instability eventually devolving into boot failures/startup repair failures etc. I gave up at this point and resigned myself to the thought that some part of the hardware itself had been damaged by a power surge and I needed to replace it. I took it in to my nearby Canada Computers who ran a diagnostic and ... Read more

A:Bootup Failure/Repair Failure/Corrupted Files

Hello !! Welcome to SF !!

What I think it might have damage the PSU. The low voltage to the Motherboard and other devices might be causing the crashing and freezing. See if you can get a spare PSU replaced it and test it and see if it works. If it works then we know. Honestly i think it hardware.

Good Luck,
Captain

Read other 3 answers
RELEVANCY SCORE 75.6

One of my clients was trying to install Office XP and got the error message: Error 25003. Microsoft Office setup cannot continue because the installation source has been corrupted.

I looked this up at Microsofts website and they recognize this as a problem and they say it occurs if:

You run Setup by using version of Office XP on a computer that does not have a qualifying Office upgrade product.
In the Product Compliance Check dialog box, you click the Drive list and then select your CD-ROM drive.
You eject the Office XP CD, insert the CD for a qualifying Office 97 or Office 2000 product, and then click OK.
After the qualifying product is detected, you continue the Office XP installation, with the CD for a qualifying Office product still in the drive.

To resolve they say to:
With the error message displayed on your computer, eject the Office 97 CD or Office 2000 CD from your CD-ROM drive.
Insert your Office XP CD.
First of all I could not find a compliance check dialog box.

Even if I could have, howvere, the client could find their Power Point 97 disc, but not the Word disc. (These were the only two office products installed.) They think Word came with their computer which only has a restore disk, not a separate Word disk.

I tried ejecting the Office XP disc ad inserting the CD for the Power Point 97 and nothing happened.

I ran the uninstall all office products by viewing the Office XP Cd and running the complete uninstall of all office products.

Got the same error.

... Read more

A:Error message "installation source corrupted when loading Office XP

Read other 10 answers
RELEVANCY SCORE 75.2

This problem started a couple days ago. There doesn't seem to be a user initiated trigger, as it first happened after the computer was idling for a while, and subsequent crashes/problems occurred at various times in various circumstances, all the while getting worse. I'll elaborate below, but first:HardwareMotherboard: Gigabyte GA-P35-DS3LProcessor: Q6600Memory: 2x 1GB Ballistix (on QVL)Hard Drive: 500GB Seagate 7200.11Video Card: MSI 8800GTPSU: 630W RaidmaxSoftwareOS Version: Windows XP Pro 32 bit, 5.1.2600 Service Pack 2 Build 2600Antivirus: NOD32Firewall: Zone AlarmThe ProblemThe computer is almost exactly two months old, and was running perfectly up until this point when, as stated, it crashed seemingly randomly and never stopped crashing since.The first error I was not around for. I came back to my computer to find it was in an infinite BSOD-reboot loop, where it would clear POST and the Windows splash screen would pop up for about three seconds followed by an instant BSOD. It probably was going on for a good 20-30 minutes before I stopped it, which I did by completely powering down the system and then restarting. When Windows loads, it pops up the message 'Windows has recovered from a serious error'. I send the error report and it says everything is unknown except that it was caused by a driver, but doesn't know which driver. I figured it must have been a random thing, because I hadn't updated any drivers since first building the computer, ... Read more

A:Bsods And Corrupted File System Structure And Corrupted Drivers, Oh My

all of your hardware seems made by reputable companies but for onePSU: 630W RaidmaxEverybody makes a few bad power supplieshttp://www.newegg.com/Product/ProductRevie...False&Page=Did the gigabyte mobo come with some monitoring software utilities?

Read other 4 answers
RELEVANCY SCORE 73.6

I recovered the pics after I deleted them, But half of them are corrupted !
Any suggestions about a software that I might use !

Thank you All.

Read other answers
RELEVANCY SCORE 73.6

Hello,

I have what may be a corrupted font keeping me from being able to navigate some program menus.

All I see are squares or || marks instead of text. I have attached 2 screen shots which show what the program interfaces look like.


Any suggestions or advice would be greatly appreciated.

A:How to repair corrupted fonts

Hmm, this is indeed strange. If it is the font, one would have to know which one it is. You can always try sfc /sconnw in elevated command prompt.

Read other 1 answers
RELEVANCY SCORE 73.6

Does anyone have any recommendation or procedures for repairing a corrupt PDF? When I open the file I get "There was an error opening this document. the file is damaged and cannot be repaired." There seems to be a myriad of tools out there but none that I could describe as reputable. Are there any opensource linux based solutions for this possibly?

A:How can I fix/repair a corrupted PDF file?

Hello,

I've never used this freeware PDF Recovery Tool, but looks like it may work.
SysInfoTools PDF Repair Tool - Free download and software reviews - CNET Download.com

Fix Corrupted PDF File using Smart PDF Recovery Tool

John

Read other 1 answers