Over 1 million tech questions and answers.

Remembering drive letters

Q: Remembering drive letters

I just started seeing an issue with my external drives connected to my laptop running Win7 Home Premium x64. I have 2 external drives connected via USB to my laptop. In the past, when I unplugged the drives, and later reconnected them, the previously assigned drive letters (X: and Y: ) were again properly assigned to the two external drives. Lately, when I reconnect the USB drives, they get assigned the next drive letters in sequence (E: and F:, respectively). What is causing this behavior and how can I force them to remember their old "assigned" letter? I assigned the drive letters using the manage computer, disk management, change drive letter process. I always use the "safely remove hardware and eject media" feature prior to unplugging the drives... and I have not changed any behavior on my part.

Both stay connected to the same powered USB hub... rather than messing with the drives individually, I just use the remove hardware applet and then unplug the hub. I always use the same USB port for the hub, and the drive themselves stay connected to the hub... BTW, this used to work perfectly under both XP and Win7 ... until recently...

Preferred Solution: Remembering drive letters

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Remembering drive letters

Here ya go:

Hard Drives - Lock a Drive Letter

Read other 9 answers

Have just installed a new 8.7 Maxtor in a P100. This drive is set as master and partitioned into 5 which assigns drive letters c,d,e,f,g . If I re-install the old 500mb drive unit as a slave ( Quantum Maverick) it assigns itself as drive letter D. I want this drive to show up as drive H . If I go to Device manager, hard drives, double click on generic ide type 47, settings, for this drive the drive letter assignment is there, but I cannot change it. Any ideas please.

A:{SOLVED} Slave drive letter inserts itself within master partition drive letters

I don't think you can change it. Normally the bios will take the primary of the 1st ide drive as c, the primary of the second ide as d, the next partition of the primary ide drive as e, etc.

Read other 3 answers

I've seen a similar problem in this forum, but I can't find the identical problem or a solution.

Simply stated, I made a copy of my w2k hard drive using ghost and when I try to boot to it, I get an error to the effect that the page file is missing or too small. Safe mode doesn't work either.

Read on for more details. I have also posted this to Western Digital and am awaiting an answer from them.

I want to install my new drive as my master because I believe I am having errors with my existing drive.

I have a master drive (C: ) and a slave (F: ). Most of the data on the slave got there by running the drive to drive copy (not the install new drive) selection from data lifeguard (Western Digital utility).

Because I learned in the past that I cannot successfully boot from the copy made by data lifeguard, I used Norton Ghost (version 10.0) to copy from my old master to the new drive. Ghost has an option that says it can be used to install a new drive.

I'm pretty sure I kept the jumpers and physical drive locations straight through all of this. Here is where I am at. I was careful.

If I try to boot from the new drive as master with no slave, the boot fails. It tells me the paging file is missing or too small. I do not have this problem booting from my old master with no slave. In both cases the slave is physically disconnected. If I attempt safe mode with the new drive, I have the same problem.

If I boot from the new drive with the existing F: (created by... Read more

A:Can't boot to hard drive copy - no pagefile & drive letters confused

Read other 9 answers

I think this is a generic UEFI / Win 8.1 question (not dependent on model).

However, FWIW I have a Satellite P70-A01D (bought localy here in Australia).

This is a 17.3 inch Gen4 i7 4700MQ ? Intel HM86 ? 16GB RAM ? Win 8.0 64-bit.

I have updated the OS to Win 8.1

This P70 comes with an empty HDD bay #2 - so I have purchased a 250GB Samsung 840 EVO SSD which I wish to use as the primary Win 8.1 boot/system drive.

I installed this SSD into #2 bay and from there I had no trouble in using the Samsun Magician cloning software that came with the SSD (V 4.0 DC) to clone my 1TB system over on to the SSD.

There are lots of instructions from Samsun and all over the web as to how to clone and 'substitute' an HDD with an SSD - however there is much less available when it comes to 'adding' the SSD - in bay #2 - whilst still keeping the original HDD fully functioning as an extra drive.

After running the cloning software I tried just going into the UEFI settings on restart and changing the order of the boot drive ? placing the SSD above the HDD.

This worked ? however there were obviously issues still as I hadn't renamed the drives ? so SSD was running as system but it was mounting as D: and HDD was still C: and most system/application paths were still set to access C: !

It led to crash and reboot cycles of the desktop (?? &/or explorer.exe ???) and two consistent... Read more

A:Satellite P70-A01D: changing drive letters after upgrade of 2nd SSD drive


I think you could try to change the drives letter as suggested in the Microsoft article.
In case this will not be possible, try to use a 3rd party software for example like GParted.

You could boot up the unit using the live USB version and could try to change the drive letters.
But it could be possible that your system would not boot up properly after such change.

Therefore you should not forget to mark the partition as bootable.

Feedback would be appreciated

Read other 1 answers

Pretty useful modification if you have long drive names, or are just particular about your layout.

Drive Letters - Show Before or After Name in Computer

A:Windows Explorer: Display Drive Letters Before Drive Names

great thanks for the post easy to do and it looks good on the eye

Read other 2 answers

I've spent several hours doing searches trying to find a reason for the way drive letters have been assigned on a new system I put together today. Every system I have ever configured (starting in the late 80's) with 2 internal drives the first partition on the boot drive is C: and first partition on the second drive is D:. The remaining partitions on the boot drive get the next series of letters, E:, F: and G:, and the remaining partitions on the second drive go from there, H: and I. The Windows 7 Pro system I'm typing this on is exactly like that.

Today I put together a new system and installed Windows 7 Home on it. I was amazed to find the drive letters assigned differently. The first partition on the boot drive is still C: and the first partition on the second drive is D:, but E: is assigned to the second partition on the second drive (it only has 2 partitions). The remaining partitions on the boot drive are F:, G:, H: and I:.

The only thing that is obviously different on the new system is that the boot drive is a Velociraptor SATA3 drive and the second drive is a Seagate SATA2 drive. The boot drive is connected to the SATA3 port and the other drive is conencted to the SATA2 port.

I'm trying to figure out what's up with the drive letters before I install any software in partitions that might get a different letter if I correct whatever has caused this.

Thanks in advance for any ideas on why this has happened.

A:Why would Windows 7 assign drive letters oddly on an internal drive?

Not sure why this happened, but I think if you simply reshuffle the drive letters to match what you're used to (i.e. disk 0 having C: E: F: G: and disk 1 having D: H: I: ) - use Disk Management for this - then you should be safe and not have to worry about unexpected letter changes.
I believe that once you (re)assign drive letters, Windows saves them in the registry such that they become fixed to the respective disks/partitions for good.

Read other 5 answers


I'm about to install a 2nd hard drive into my computer. Both the old and new HDs are SATA drives. Gonna use XP Home on new HD (its already on old HD). Physically installing the new HD should be easy. Its the set-up afterwards that I have questions for you experts.

I'm not gonna have several partitions. Just gonna have 1 big one like old HD.

My goal is to hopefully have the new HD be my main HD (since its bigger) with drive letter C:\ and my old HD being the back-up with some other letter.

I will change the bios boot order so it looks for the CD 1st since this is where I'll be installing windows from. I dont have a floppy. I have a reinstallation CD plus many other CDs with drivers and so forth so hopefully that wont be a problem. I printed out the order of installing the OS, drivers, service packs, etc from another thread at this great site so hopefully that wont be a problem either. Its before getting to that point that I have questions.

1. I should disconnect the original HD connecter and just leave the new one hooked up when 1st booting correct?
2. Whats gonna happen with the driver letters? I think the new HD is gonna get assigned the normal C:\ drive letter since the old HD that had that drive letter wont be hooked up. That would mean both end up with C:\ (when old one is hooked up again). I'm sure you cant have two HDs in same system with same drive letter so that wont work right?
I know how to change drive letters in XP BTW.
3. ... Read more

A:Installing new 2nd Hard Drive plus drive letters questions


1. you are correct.
2. yes the new one will be the c:/ drive. the old one when hooked up will be automaticly change to a different letter e.g E:/
3. if the old hd has a windows installation on it you should be able to boot between the two hds. if you were to boot into your new hd the shortcuts on the old one will not work. if you were to boot into the original hd the letter would be changed back to C:/ ; therefor the shortcuts will work.
4. the first idea would be a bit easier (my opinion) but you could install the new hd before anything is put on it and it would be set a drive letter. when you go to install windows you will be able to select a disk (e.g your new one) to install to. and if the drive letters are confusing it should list the size of each disk so you would install to the bigger hd.

I hope this helps.


Read other 2 answers

Hi all

I have installed an optical drive in my computer today and my drive letters were changed. I have changed them back to what they were and after restarting my computer I was unable to log to Windows 8.1 due to the OS being unable to find user profile (my user profile is moved outside of the system drive).

I restored my system to the point from before the new drive installation, but I still would like to change the drive letters around, as some of my software relies on specific directory paths with drive letters.

1. The state from before the installation of the new optical drive.

System (C:)
Virtual Box (D:)
Program Files (E:)
Passport (F:)
Storage (G:)
Program Files 2 (I:)
2. The state after installation of the new optical drive:

System (C:)
Virtual Box (D:)
Program Files (E:)
Optical Drive (F:)
Passport (G:)
Storage (H:)
Program Files 2 (I:)
3. What I'd like to have:

System (C:)
Virtual Box (D:)
Program Files (E:)
Passport (F:)
Storage (G:)
Program Files 2 (I:)
Optical Drive (any letter, preferably X:)

My user profile WAS located in G:\Users

It is now located in H:\Users and I can log in to Windows. After changing the drive letters around to 3. above I can no longer log in, as Windows is unable to find the user profile on H:\Users anymore.

I use EaseUS Partition Master 10.0 to change the drive letters.

Is there any way I can change the drive letters and make Windows aware of user profile path change?


A:Drive letters changed after an optical drive installation

right click start flag > disk management >

Read other 4 answers

I've just got myself a new PC here, and I'm in need of a virtual hard drive or two. My laptop which I still use has been running MagicISO/MagicDisc for a long time now and never had a problem. Since both computers are on win7, I figured it would be the same situation on the desktop, but MagicDisc will not let me assign drive letters to any virtual drives, making them virtually unusable, no pun intended. The drives have question marks, even after I select a new drive letter and hit OK. I've tried many different letters, so that's not the problem. Someone on a different forum said to add more drives and they would work even if the first one didn't, but I've tried 1, 2, 3, and 4 drives, all of them have question marks, none of them will let me change them. Normally I'd write it off as crappy software, but I'm conflicted because the same exact program works so well on my laptop, which again is the exact same OS. My laptop never had the question marks, it just assigned drive letters automatically. In my frustration I tried to go with Daemon Tools Lite instead, but ended up with a completely different problem where the computer freezes during startup.

Can anyone tell me how to get MagicDisc to work like it does on my laptop? Or alternatively, is there a better (preferably free) program for creating virtual drives? I've gotten the impression that MagicDisc is a little outdated. Keep in mind this is a new machine with anti-virus software, and the only thing Windows warned me to be c... Read more

A:MagicDisc won't assign drive letters (virtual drive help)

Quote: Originally Posted by pegpin

... Keep in mind this is a new machine with anti-virus software, and the only thing Windows warned me to be careful with so far was MagicDisc itself. I know that's a huge red flag, but again my laptop has been running it for years without a hitch, so I didn't think much of it. Thanks in advance for any advice you can give me.

Perhaps your AV is blocking the software from running. What AV are you running? There may be an option where you can exclude the AV from blocking the MagicDisk software.

As far as alternatives, I use the freeware: Virtual Clone drive. I've never encountered problems using it. Also, in Win 7 & Win 8, you can simply double-click on the ISO and the OS will automatically mount it and assign it a drive letter. To unmount, simply right-click and select "Eject".

Read other 1 answers

After I received my new PC I immediatly added an old HDD for backups.

however it has always been labled as H: and not D: as I would expect. how can I change this?

Also I have a DVD-RW... and a standard DVD. However in my computer it shows a 3rd DVD Drive (I:)

In devise manager it is called OM1279F IMN650O SCSI Cdrom Device.

I don't have a 3rd drive - how do I remove it?

A:Drive letters all wrong - And additional CD-Rom Drive

From the start menu, right click on Computer and select Manage

From there, click to manage disk drives

Hopefuly this will give you enough information to figure out what is going on, and the tools to fx things (right click a partition to change its drive letter)

Read other 6 answers

How do I get the connection to the second drive letter. I did have it when the hard drive was installed but some error dropped the connection.

A:Hard Drive Split two drive letters

Read other 8 answers

I just bought a WD 1 TB to replace 120 GB slave (it was 'c:') I had. I intended to still use it as a slave and keep my 320 GB (it was 'd:') as the master. They're both SATA's so of course that doesn't matter so I just kept the 320 set as the primary in BIOS.

At first boot up the computer started fine but when it started Windows the previous devices hadn't been loaded and I was asked to register again before starting. I re-registered and clearly all the previous settings are gone.

I think this is because the drive letters were changed? Is there a way to check...is it something else? Can drive letters just be changed back and voila everything finds itself again?

Thanks for any help.

A:New Hard Drive/Changed Drive Letters

disk management in computer management access through administrative tools
right click on the drive in question and select from the menu to check

Read other 2 answers

Hello all,
I have this really weird issue where all drive letter seem to be taken, even though there is nothing calling for their use. First issue was when I call a program from an external HDD and resulted in an incorrect path.
Seemed that the "I:\" Drive, in this case was remapped to a different letter. All subsequent drive partitions on this HDD were also remapped. When opening a program to encode audio it listed just about all drives, a-z, even when there was no content. A bit later, not only one of 3 partitions on the external HDD was available, "Z:\" and all other partitions could not find an available driver letter to map to.

I tried DISK MANAGEMENT to assign a permanent letter to one of the letters, but there were no drive letters available. Malware software found nothing, but running MS Security essentials now.

This is a big issue, one I have ZERO experience in troubleshooting, so looking for some expert help here.

Dell Inspiron B130/2MB RAM/1.7GHz/Windows 7 Home Premium


Read other answers

I have no idea why but I have an issue where my brother's computer after a clean install of XP from 98 exchanged ID letters. Drive "C" is now "F" and the Zip drive is now "C". It may have been something to do with SP2 which I removed. Windows won't allow me to change the hard drive back to "C" even after I made it available by designating the Zip as "H". Trying in Safe mode did not allow the change, nor did Partition Magic change it. "C" was added to the name but I could not change it from "F". I already started over and reinstalled XP but it still came up "F" as the hard drive. Things work after the second install where the drives quit after the first half-way into re-loading programs. Now it is just a pathway issue. What else can I do short of starting all over? Is there a way to change the hard drive designation? Any help would be appreciated. Thank you!

A:Hard drive and Zip drive exchanged ID letters.

Read other 6 answers

Is it possible to change the drive letters of CD Drives and removable drives eg PC Card Slots on Printers?

A:Drive Letters

Read other 7 answers

I'm using Windows XP home SP2 on a notebook.
When I right click over my CD drive icon on the taskbar then select properties it always defaults to the shortcut tab which shows the Target is F, but when I try to click the General tab I get this message:- The name specified in the Target Box is not valid .........
This happens to both the internal CD (F) and an External CD (E) connected by USB.
I've checked the manage discs in My Computer and it shows the correct letters.
Can anyone help

A:Drive letters

Read other 13 answers

in my computer my floppy is drive a,nothing as drive b,my bootable hdd as c,my cd rom as drive d and my secondary hdd as drive e is there any way i can change this as i want secondary hdd as d and my cd rom drive as e.i am running windows xp pro sp2 and i only know how to change drive letters i win 95/98/ME

A:Drive letters

Mycomputers -> Rt click -> manage -> disk management ->

select the drive -> rt click -> change the drive letter -> select the letter -> click ok

Read other 1 answers

I just installed Windows XP on a brand new hard drive and Windows Explorer shows the hard drive as the E drive and a Zip drive as the C drive. A drive is the floppy and D drive is the CD-RW.

Questions: Is this a problem and how do I correct it?

I've installed nothing else, so reinstalling XP is no big deal. And I checked in the BIOS it it shows the HD as the primary boot master and the CD-RW as the secondary boot master. I have no drives other than the aforementioned.

Any advice will be appreciated.

A:XP & Drive Letters

Read other 13 answers

I am running 4 PCs using win2000pro service pack 4. They are connected to a hard-wired Ethernet network with 2 PCs per hub. I am doing a backup of each PC weekly using Acronis True Image. The True Image software creates an image of each PCs hard disc. The images are stored on an external Seagate USB disc connected to one of the 4 networked PCs. The USB drive is a shared drive that can be accessed by each of the networked PCs.

The problem: I recently purchased a Maxstor USD disk to alternate with the Seagate disc. The Win2000 assigns drive letter e to the Seagate and drive letter f to the Maxstor drive. Only one disc is connected to the network at a time. Is there some way to force win2000 to assign the same drive letter to the USB discs so that it would not matter if the Seagate or Maxstor was connected they would always be drive e.
Thanks for your help,

Read other answers

After having to reformat my system (C) partition, my data partition (D) is now C and the new partition (which will contain XP) is D. I'm going to reformat it again if I can get the letters fixed, but deleting the data partition is out of the question. Possible?

Such a pain in the *** using the D drive when typing paths... I mess it up every time.

A:Drive Letters


I deleted the original C partition and re-formatted it as NTFS. Not sure if that helps or not.

Read other 1 answers



Please provide additional information so that we can better understand the issue.
The more detail you can provide the easier it will be to understand the problem.

Read other 1 answers

Can u chang your hard drive letters if so how?

sincerly, Liam

A:Drive Letters

Hi Liam,

yes and no

you cannot modify the drive letter of your system or boot volume.

But you can change other drive letters by

right click my computer>manage then select disk management.

Paul V

Read other 2 answers

When I had win 7 installed for me I had some of the drive letters changed. I cant remember which but I think it was the DVD drives. I have 3 hard drives and 3 cd rom and dvd drives. I am desperate to change back to the letters Win 7 auto assigned. Can anyone tell me if this is possible as I don't know what they were originally. I need to do this because I bought Acronis True Image and recovery cannot auto find find backup files. It asks me to change locations and I am sure I would precipitate a disaster!! As a 76 year old ignoramus I am depending on your help otherwise I have wasted a wad of cash on a program I cannot use. Ta.

A:Win 7 drive letters - please help

Welcome to Seven Forums semaj. You can certainly change drive letters:


You may have to change some letters to a higher letter to free up that letter for another drive. For instance. If you currently have C:, D:, E:, F:. G:, H:. You may have to change H: temporarily to M:, so you can change E: to H:, and then use E: for another drive, etc. Hope that made sense. Also, make sure any letters you chose aren't used by USB devices, if so, just pick another letter until you get everything renamed. A Guy

Read other 9 answers

have a Windows 98 machine and have a USB board in it. I have an external harddrive connected to one of the ports. I at times connect other equipment, and when I do the drive letter gets changed. Since I have programs that look for data based on the drive letter, the data can not be found and I have to reconfigure the application. I would like to know is there a way to assign a perminate dive letter to the external drive?

A:drive letters

duplicate post:


Read other 1 answers


I am using the W8x64 install disk advanced repair features to do a checkdisk on my H: drive partition,
named "backup_c"
it ran through the checkdisk process but when I checked the directory structure I find it is not the
drive I wanted, I know this by the name shown in the DIR results.

How do I find out what drive letter has been given to the "backup_c" dive I want to check?



A:Drive Letters in DOS

Hello Daniel,

As you have found out, drive letters are not always the same at boot as they are in Windows.

You could use the diskpart command to help see what the drive letters are at boot.

A Description of the Diskpart Command-Line Utility
1) Open a command prompt at boot.

2) Type diskpart and press Enter.

3) Type list volume and press Enter.

4) You will now see a list of volumes with their drive letters and labels.

Hope this helps,

Read other 3 answers


I want the next know: How do you change the drive letters.?
Why do I want know this? Since 27 may 2011 use I Windows7 Home Premium, Windows 7 had called the partitions on my external hd. F and E .
Yesterday plugged I in another usb device and Windows7 changed the stations letters in J and I, I want change this in F and E .

I did take a look in the configuration screen and took a look in device manager and I didn't seen how I could change this.
I am not familiar with the new os, but you are, so I thought, I ask a question about this.
Now do I hope, that you can tell me how I fix that.
Thank you for your time.

A:Drive letters

Disk management (START - RUN - diskmgmt.msc)

Read other 4 answers

Hi folks... first time here, I'm hoping I can get some quick help.

I'm running Windows XP Home, and over the last couple days my Windows install has gone crazy for some reason, had many problems with random restarts, freezing, and then last night Windows just plain failed to load, citing missing/corrupt system files.

I tried booting from my Windows CD and looking to Repair the install, but while the Windows setup saw that I had the Windows installation, it did not offer Repair as an option... only letting me delete the partition or install Windows onto it.

Because I hadn't had a chance to backup certain files, as a temporary thing I chose to install Windows onto the partition without deleting/formatting the existing (broken) install first.

I did so, simply so I could get into Windows and access my Documents and Settings folders, at which time I copied some folders over to a secondary HDD I have installed.

So, starting tonight, I plan on wiping out the main drive and reinstalling a clean copy of XP.

But.... I also noticed last night that for some reason my drive letters are changed.

I have 3 HDD's in my PC, a DVD drive, and a memory card reader.

It USED to be that my main HDD (with the Windows install) was C:, my DVD drive was D:, my 2 secondary HDD's were E: and F:, and the memory card readers were some other letters.

However, I saw last night that for some reason the main HDD, with the Windows install (the new install and the old broken ins... Read more

A:Drive Letters

Hi welcome to the tech support guy,
I would do as you said, remove the other two HDD's and then do the install.

Read other 3 answers

Just got a new Dell and Win 7...I have two HDD and both show up but have two IDs...."C:C and DFf"...can't rename them.

Also have two CD drives...same deal. How do I rename the drives as C, D, E and F????

A:Drive letters

Read other 14 answers

I am trying to download some software and it will not load. It says to substitute with my DVD-ROM drive letter, in the Run box. I have tried D, A and C and none of them will work. I can't figure out what is wrong... Please HELP!!!

A:DVD-Rom drive letters

More information please...Does your DVD or CD react when the CD is put in?
Or, is this a case of downloading from the internet?

Read other 1 answers

how can I get my drive letters back, I unclicked most of them, now I need for usb drive etc more letters and forgot in XP how and where I've done it. please help

A:drive letters

Read other 6 answers

My hard drive has 4 partitions, 3 with a different XP operating systems on, and the 4th I use for backups. When I boot to partition 1 ©, The drive letters for the 4 partitions are C - D - G - H. When I boot to partition 2 (D), The drive letters change to C - D - E - F. I was wondering if there were any settings that could prevent the drive letters from being changed this way.

A:Drive Letters

It has to do with what type of partitions they are I think (eg a primary partition as opposed to logical partitions inside an extended one).Reading this may help: http://www.pcguide.com/ref/hdd/file/part.htmIn the left pane, click on the last link "Drive Letter Assignment and Choosing Primary vs Logical Partitions".

Read other 9 answers

I have asked the question before about assigning drive letters to external usb drives in Vista, so I know how to do that. What I can't get to happen is for them to stay that way. I have a couple of drives, that I store music/recorded tv on. The other photo's, home movies, etch. We'll say that one is drive G:Music, and drive Ihotos. In related programs, saving options are set to these drives. I never unplug these drives, but turn them off to save energy. The problem is, if I turn drive I: first, it is assigned G:, or sometimes other available letters. Turning on G: would then become I:. Can I assign letters/volumes, so no matter when they are switched on, the drive letter remains the same. As stated above, I am using Vista 32bit.

Read other answers

I have two 200 GB drives "C" and "D" each with fully updated XPpro/SP2

1. Opening "C" in 'My Computer' the secondary drive is correctly identified as "D" with DVD at "E" and CD at "F"

2. However opening my secondary drive in 'My Computer" is is identified as "F"
with primary drive still at "C" with CD at "G" and DVD at "E"

On the secondary drive I have tried bith in "disk management" and in 'Command/Diskpart" to change "F" to the un-assigned letter "D" but get message: Diskpart cannot re-assign the above letter on a system, boot or page file volume.

I have no idea why one setup is correct and the other not and would welcome views as to why this has happened and what to do about it?

A:Drive letters

The reason is that D is in use by drive C, as drive C takes precedence. But the question is why do you have windows installed on both drives?

Read other 1 answers

Origionally, i had two hdds. an 80 gig ata (c:) and a 120 gig sata (d:)
I added an 80 gig sata drive (H:) and used Ghost to copy C: to H:, did a repair install, and removed C:. Now, i have a hard time getting most programs to install, because they all assume windows is on drive C:. How can i change H: to C:, and would i want to?

A:Drive letters in win xp x64

G'Day darkone3200,

Have a read of this thread that I posted to another forum member the other day with a similar problem......................


Hope this helps solve yours......post back and let us know.

Kind Regards,

Dave T.

Read other 9 answers

Hi there,

Yesterday I decided to install XP alongside my Windows 7, in order to make it a dual boot. Before Installing XP, I had Win 7 taking up my entire hdd as well as the standard 100mb System Reserved Partition that is usually created when installing Win 7. So when I went to install XP, I created a 20GB partition. All went well and I followed the instructions from one of the guides here on the site (thanks shawn)

However what strikes me as odd is that when I'm in XP and 7, there are different drive letters reported for each OS.

This is what I see in Windows 7 :



And this is what I see in XP :


As you can see in Win 7 my Windows Se7en is marked as C: and my Windows XP is marked as E: and finally my System Reserved is marked as S:


In XP I get something totally different, my System Reserved is marked as C: my Windows Se7en is marked as D: and finally my Windows XP is marked as F:

So as you can see from all of this I am baffled Why can't it just stick with one Drive Letter for both Operating Systems ?

Would it be possible for me to hide the respective partitions ? For example, in Windows 7 all I would like to see is my Windows Se7en Partition and the System Reserved Partition. And naturally for XP all I would like see is the single Windows XP Partition only.

How can I fix this ?

Once again thank you ... Read more

A:Different Drive Letters appear in XP and Win 7 ?

Just wondering

Read other 5 answers

When I plug a USB stick in any USB port the laptop allocates the next available letter to this drive - "E" - this applies to any USB stick I normally use.

EXCEPT for one particular USB stcik which always shows up as "G" even though "E" and "F" are available.

What's happening here and can I solve it?

A:Drive Letters

Hello carrotmuseum,

When you connect a USB to the PC, its hardware ID is referenced to the assigned drive letter for it. This way when you connect it again next time, it'll have the same drive letter.

If you like, you can use an option in the tutorial below to change the drive letter to what you like instead.

Drive Letter - Add, Change, or Remove in Windows - Windows 7 Help Forums

Read other 8 answers

Good day again to you Gurus,
Running XP Home edition/SP3. Amd Athlon 64 3200+ 2.01GHz 1 GB RAM.

I have three internal hard drives. C,F and G. When I Click on my computer, it will show all my drives but there are no Drive Letters nor the letters for my two DVD's or for my card reader. If I open the G drive there are no file names. Rebooting ot turning off and on my computer makes no difference. If I do a restore then I get everything back to normal for a while and then have to go through another restore.
I am hoping that someone can point me in the right direction to put this right. The computer is NOT connected to the Internet although it is Net Worked.
Thank you for reading.
I look forward to your knowledgeable replies.

A:No drive letters

If you know which drives are which try this:


Under the STORAGE folder there is a folder called DISK MANAGEMENT

Click on this and it will show you your drives and the letters for them. If not you can change them to whatever letter you want.

Just remember if you change a drive letter it might have some issues with the programs installed because
Windows knows what drives they were installed on and if you change that some programs might not function or your
short cuts might not work.

That's why I asked if you know what drives are what then you can label them as such and you should be fine.

Good Luck

Read other 9 answers

After a recent HDD failure, my manufacturer sent me a new one, as my warranty is still valid. After I purchased the full version of Windows 7 Professional, I burned it onto a disk, and booted my computer from the CD rom drive. It's only an 80 GB hard drive, but I had 4 partitions. 1. (EISA Config), 2. (C:-Windows XP Professional) 3. (E:-Empty, reserved for win7), 4. (DellRestore).. after I booted from the CD ROM drive with my windows 7 installation disk inserted, I was asked which partition I would like to install 7 on. I chose E:, because it's the partition I was reserving for it. After installing windows 7, I realize my C: (Windows XP Pro) drive has been bumped to D:, and my CD-ROM drive is now E:, and win7 is on C:. I'm aware that this can cause problems when trying to install software or games from a disk, so I'd like to know how to fix it. Also, I should note, all of my Shortcuts which were in C:, which changed to D:, are now non-working, as they refer to a C: directory. Any advice in these matters would be appreciated. Thanks..


A:Drive letters...

You should not face any issues in installing softwares. Earlier when I installed Window 7, its was on C drive. When I installed Windows XP as dual boot, it gained H drive letter. So whenever I install any software on XP, it directly goes into H:\Program Files.

You can change the drive letter by clicking Start and in the Start search box, type diskmgmt.msc and press enter. Right click the drive which you would like to change the drive letter and choose the available letter.
However, changing Drive letters can cause serious problems to either of the OS and may stop booting.

Read other 9 answers

what happens when you run out of drive letters
i have several driver 3 dvd burners and a multi card reader which uses 4 letters im getting close to the end of alphabet, and was wonering what hapens when you ron out of letters or reach the end

Read other answers

I have XP Pro. I have a USB external drive that I only turn on to Archive a FDISR image to and to update that image. I assigned it drive G. This has worked fine until I hook up a digital picture frame,that shows up as F. For some reason it takes the G assignment away from my Archive drive. The next time I try to update my Archive I have to go into Disk Management and make it G again. Is there some way to stop the re-assignment of the drive letters?

A:Drive Letters

Go to Computer Manager.
Start -> Settings -> Control Panel -> Administrative Tools -> Computer Management
Once you're there, on the left go down to Storage -> Disk management
Right-click the drive you want to assign or re-assign a drive letter to and click "Change Drive Letter and Path"

Just like that.

Read other 4 answers

Just a follow up from this problem where i had to reinstall usb and chip set drivers.


None of hard disks seam to be picking up letters i have tried going into Manager and setting drive letter in there but does not seam to work, it sets ok but when i go to explore nothing happenes, the only way i seam to be getting any files off is by using easy recover and this takes a long time.

Thank you

Read other answers

When I Click On The "my Computer Icon" Cant See The Drive Letters For My Cd-rom (G:) Or Dvd Player (F:) To Open Or Explore. Both Work Just Fine. When I Put Something In Either One, The Folders Views Pops Up On The Side And I Can See Whats In Either Drive. How Do I Get The Drive Letter, Say (g:) Drive For Cd-rom Or (f:) Drive For Dvd To Appear On The Same Window With My
(a:) Floppy Drive
(c:) Boot
(d:) Back-up
(e:) Recover
When The "my Computer " Icon Is Clicked On Or Can It Be Done?

Read other answers

I just formated one of my servers to discover that local disk is not E:\ instead of C:\ , i tried to change it back, but it will not let me since it is the boot device?

Anyone got an idea of what to do?

A:Drive Letters

I think that you have to learn to live with it, or install Windows again making sure it goes to C:\.

Read other 2 answers

Hi, it's Anthony again. After requesting help regarding clearing a hard drive (resolved, thankfully) I've run into another problem.

Using the disk management option on my Windows 7 PC, I reformatted a secondary hard drive so I could use it for extra storage space. After finishing this reformat, I loaded two folders onto this hard drive with several dozen GB of data apiece in them. The drive was labelled as Drive F.

However, I wanted to change this drive letter. I went back into disk management and changed the drive letter to J. I was told I had to restart my computer, so I did. Now, all the items in those two folders ask me to "insert a disc into Drive F" instead of running. I figured "fair enough, should have changed the letter before I loaded files onto the 'new' drive, guess I'll just switch back to the old letter and deal with it."

However, going back into disk management, I've found that the old drive letter, F, is not an option to change this drive into. F is not in use anywhere else in the computer so I'm not sure why I can't switch back. My questions are:

1. Is there a way to change the drive paths for the files/folders in Drive J/F en masse? If so, how?

2. Failing that, is there a way to get the old drive letter back?

3. Failing both of those, would transferring the files from Drive J/F to Drive C then back again reset the drive paths and fix the problem?

I'm loathe to do 3 unless it's the o... Read more

Read other answers

Okay guys, I jst bough an HP a340n 2.6GHZ P4 with a multi-car reader. Here is the problem. I have a databse which i connect through a short cut to a mapped drive. To make a long story short I need to have a mapped drive with the letter G:. Problem is that the card reader takes up G: H: I: and J: for each type of reader. Now I can use G: for what I need to if I go to device manager and uninstall that particular card reader (which I don't use it that often anyway because I don't have that kind of card) and then I can use the drive letter G: for whatever I want. But, whenever I log off and log back on my mapped drive is disconnected because the letter G: is then taken up by the card reader again. How can I rectify this again.

A:Help on drive letters!

Read other 12 answers

Hey guys,
I seem to be making a habit of posting on here soo..

I've been having problems with my computer for around a week, and i gave up and decided to reformat/reinstall windows. Firstly my HDD is divided into three partitions two of which are too big to copy onto spare HDD's as they're my music and games files.

Anyway, i accidentally deleted my C: partition.. woops. And so my D: drive was renamed C:
Windows then installed on D:

I've tried changing the letters in drive management etc, but since theyre my system and boot drives i cant change them.
Microsoft support have a solution for this which involves logging on as admin and changing permissions to full access etc. And then going into regedit or regdt32 but when i attempted it i obviously failed.
I was wondering if there is an easier solution, or something.


A:Drive letters

Read other 8 answers