Over 1 million tech questions and answers.

User accounts script error

Q: User accounts script error

I seem to be getting this on my main pc but not on my old p4

pc specs are

P5K PREMIUM/WIFI / Intel E6750 @ 2.66 GHz / 2 X Seagate baracuda / Nvidia 8800GTS / 2 GB Corsair XMS @ 800 Mhz / Gigabyte Rocket Pro Heatsink / OCZ 700 Watt Game X Stream PSU / XP home editon

Internet Explorer Script Error
An error has occurred in the script in this page.
Line: 4
Char: 1
Error: Access is denied
Code: 0
URL: res://C:\Windows\system32\nusrmgr.cpl/nusrmgr.hta
Do you wish to continue running scripts on this page?


I have tried the following but with no success

1. Have changed the RAM for new sticks

2, have updated it to the latest bios via floppy disk

3. have changed the cables to my hard drives

4. have changed the IDE cable to my DVDRW

5. have changed the graphics card to another model and tried an install

6. hard drives have been tested and passed

7. have tried a new cpu no change

8. have tried swapping the drive out of my p4 pc which runs xp fine but somehow i get the error in the core2 machine

9 mouse freezes (g3 logitech) under xp and has done it under vista too but runs fine on my p4 pc

10. have taken it to have a new board fitted still does it but about everyother time i try to clcik it

11. have tried using HTAstop

12. have tried

To resolve this behavior, use the regsvr32 command to register the .dll files. To do this, follow these steps:1. Click Start, click Run, type cmd, and then click OK.
2. At the command prompt, type the following commands, press ENTER after each command, and then click OK when a message says that the registration is successful:
? Regsvr32 jscript.dll
? Regsvr32 nusrmgr.cpl
? Regsvr32 /i mshtml.dll
? Regsvr32 themeui.dll
? Regsvr32 Vbscript.dll
I have a g3 logitech mouse which i also seem to have issues with on my main rig under xp i lose the use of it sometimes during install and sometimes when windows is running .

13.have spent 2.5 hours on the phone to microsoft no luck

14. have tried 3 different dvd drives

But i have recently built another machine which is using my old p4 chip windows has installed perfecly my mouse works fine during install and within windows

so id love some help

RELEVANCY SCORE 200
Preferred Solution: User accounts script error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: User accounts script error

hi there. nice to meet u. i would recommend u use mozilla firefox to browse as it saves you the trouble and never comes up with stupid errors like that.
Also visit this page for internet explorer help from people: http://www.microsoft.com/communitie...3eb-7037-4d4f-bde1-d8efee1f1420&lang=en&cr=us

Read other 8 answers
RELEVANCY SCORE 84

right I've read through countless threads regarding deleting user accounts on XP but none have the same problem I'm having.

Basically as soon as the window for the user accounts managment thing comes up an error box saying "an error has occurred in the script on this page" and no information is given on any of the lines and does not disappear when you click either yes or no to continue running scripts on this page.

Any help would be mucho appreciated
 

A:user accounts panel script error

Go to Start > Run and type in MMC. Go to File Add/Remove Snap in and add Local Users and Groups. See if that works.
 

Read other 2 answers
RELEVANCY SCORE 81.2

Okay, now first ill go ahead and say that the problem im having right now ive tried to solve with dell and have called them too many times about issues with this computer. Now ive run into problems with Getting into User Accounts from the control panel and using system restore. Everytime i try to get into user accounts, it says User Accounts on the top of the box but the box itself is white. Furthermore, it then pops up with a bunch of dialogs saying an internet explorer script error has occured. Then, also recently, i was trying to get into system restore to create a restore point because i was about to make a slight modification to the registry..when i tried to get into it, it also popped up in jus a white box with nothing on it. This happens in both Normal Mode and Safe Mode. The only account that dosen't experience problems is my aunts account, whos the owner of the computer, an im not sure why that is. But anyway, do u have any idea of what i should try to do to fix this issue?(An my computer is a Dell XPS 400 with Windows XP Media Center 2005 Service Pack 2 installed)
 

A:Problems with User Accounts(Getting internet explorer script error messages)etc

You can try dial-a-fix. Its magical for this kind of problems. Dial-a-fix will put many of your registry entries to Windows default state. You need admin rights for it.

http://wiki.djlizard.net/Dial-a-fix

Read carefully first, then download and run it ONLY if you understand clearly what would it do and if you can take all the previous actions suggested.

Good luck!
 

Read other 1 answers
RELEVANCY SCORE 81.2

Okay, now first ill go ahead and say that the problem im having right now ive tried to solve with dell and have called them too many times about issues with this computer. Now ive run into problems with Getting into User Accounts from the control panel and using system restore. Everytime i try to get into user accounts, it says User Accounts on the top of the box but the box itself is white. Furthermore, it then pops up with a bunch of dialogs saying an internet explorer script error has occured. Then, also recently, i was trying to get into system restore to create a restore point because i was about to make a slight modification to the registry..when i tried to get into it, it also popped up in jus a white box with nothing on it. This happens in both Normal Mode and Safe Mode. The only account that dosen't experience problems is my aunts account, whos the owner of the computer, an im not sure why that is. But anyway, do u have any idea of what i should try to do to fix this issue?(An my computer is a Dell XPS 400 with Windows XP Media Center 2005 Service Pack 2 installed)
 

Read other answers
RELEVANCY SCORE 74.8

I am having this same issue with accessing the user accounts on a xp home machine that I have just set up. they system has possible updates from windows update at the moment. any insight to a solution would be appreciated

A:User accounts "internet explorer script error"

Hello and Welcome to TSF

Microsoft has confirmed that this is a problem in the Microsoft products, no current fix yet that I can see

http://support.microsoft.com/kb/886617

Read this
http://www.technibble.com/how-to-sto...rror-messages/

Read other 1 answers
RELEVANCY SCORE 74.8

Hi,

I just got a second hand computer from an auction, and have installed windows XP home edition and the service pack 2. my father accidentally included 4 user login profiles (the ones that appear when you first turn the computer on) instead of just the 1 for me, so I tried to delete the others. However, when i go to control panel and user accounts, i get a message saying "an error has occurred in the script on this page" and "do you want to continue running scripts on this page?" with a "Yes" and a "No" box underneath. no matter how many times i click on either the yes or no boxes, the message won't go away, and so i cant access my user accounts, and the only way to get rid of the box is to log out or shut down.

Can you please help me get rid of this???

Many thanks,
Michael

A:User accounts "internet explorer script error"

Hello and Welcome to TSF

Microsoft has confirmed that this is a problem in the Microsoft products, no current fix yet that I can see

http://support.microsoft.com/kb/886617

Read this
http://www.technibble.com/how-to-sto...rror-messages/

Read other 1 answers
RELEVANCY SCORE 72

We currently have a few public computers that anyone of the employees can use while waiting to have thier computer fixed, we have been finding that the Users folder in Vista is getting awefully crowded after a few weeks of this experiment.

We where looking for a way to have a timed script to run on each of these computer at a certain time of day to delete all User accounts on the computer except Public, and our Admin account and shutdown the computers so they would be ready for the next mornings use.

Does anyone have any ideas of how this can be done?

A:Script to Delete Certain User Accounts?

Hi psytae,

Are these computers 32-bit or 64-bit?
For the 32-bit ones, have a look at this: Windows SteadyState

Read other 2 answers
RELEVANCY SCORE 71.2

log off other user accounts in Windows via batch script.
Unable to logoff ID of other user using below script,  it just  run continuous , need assistance.
Script 
query session
logoff 1
pause

Read other answers
RELEVANCY SCORE 70.4

I cannot seem to access user accounts through control panel. I keep getting script errors. Also, I keep gettong just a blue screen when I open IE. Stating "runonce". Any ideas?
 

Read other answers
RELEVANCY SCORE 60.4

Hello again helpful peeps. I have had no problems with the User Accounts menu on this particular PC. Now when I click on the User Accounts Icon I get this error message;

"Wrong number of arguments or invalid property assignment"

What in the world does this mean?! And what in the heck did I do?!

Any help appreciated.
 

A:XP User Accounts error

I googled this, but its way beyond me to help further;
http://msdn.microsoft.com/library/d...n-us/vbenlr98/html/vamsgFuncArityMismatch.asp

can you do a system restore to earlier working time?
if you haven't already, you might want to run adaware and spybot too....links below
 

Read other 2 answers
RELEVANCY SCORE 60.4

I opened up my new Samsung Series 3 computer for the first time. I made a spelling mistake when I had to choose my account name. After Windows finished installing i made a new account with the right name and i deleted the old. But if I right-click on a file, choose properties and open the tab Security (Sikkerhed in danish) I get this: https://www.dropbox.com/s/kz8px9nvge...Unavngivet.png Why is it Pete-pc(that's the fail name)\Peter Stidsen (the new account)?

If i look in C:\Users the only folders are Shared files ("Delte filer" in danish) and Peter Stidsen: https://dl.dropbox.com/u/21887805/Unavngivet.png

A:Error in User Accounts

You most likely made username Pete when installing win7. It created Pete-pc as computer name. You want to change the computer name?

Read other 9 answers
RELEVANCY SCORE 60.4

When my grandchildren's computer is started and gets to the user account page, there is an error message as follows.

"The system could not log you on. Make sure your user name and domain are correct, then type your password again. Letters in passwords must be typed using the correct case. OK"

They click OK, then the user accounts come up like they should. Is there any way to stop this?

They have XP Home.

Thanks
Peg
 

A:error going into user accounts

Wait, are you saying that they're able to login without typing in a password when there is a password? Or when it starts up does it automatically show that error message?
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hey guys,

Let me preface this by saying that I have done some research and have found SIMILAR issues to mine, but not this exact problem.

For Christmas, I upgraded my computer a great deal. New processor, hard drive, RAM, video card, motherboard, DVD drive, power supply, etc. Basically a new machine except the case. Used a utility with my new hard drive to transfer everything over from my old one so there was no need to reinstall XP or anything.

Everything on my account works perfectly. However, my sister's account is having issues. When she clicks on User Accounts, an error message comes up saying an error has occurred in the script on this page, then at the bottom it asks if you want to continue running scripts. The rest of the dialogue box is completely blank. Clicking yes, no, or X does nothing but immediately create a new window with the exact same thing.

Any ideas on what I can do to fix this problem? Thanks for your help.

A:Error in user accounts

When upgrading a computers hardware, the best thing to do i reinstall the operating system, or else problems can occur. Because when you install xp, alot of neccecary drivers and programs installs for just that type of hardware and if you don't, it can accur alot of errors.

In my opinion, you should just reinstall the operating system. Because you can come across more errors.

Read other 7 answers
RELEVANCY SCORE 59.6

Recently my mother tried logging onto her username and the computer would not let her. It said something about not being able to find her personal profile. So I logged onto my username, which is the administrator, and tried going into USER ACCOUNTS to find out what was going on. However, when I double clicked on USER ACCOUNTS, this error message popped up:

C:/WINDOWS/system32/mshta.exe
The NTVDM CPU has encountered an illegal instruction.
CS:d369 IP:0193 OP:63 74 69 6f 6e Choose 'Close' to terminate the application.

I have no idea what this means or how to surpass it. My computer does have its share of problems, however this is very new. If you need any further information to help me, please be very specific for I do not know a whole lot about computers, but I do know some.

Thank you!
 

A:User Accounts Error Message

1st thing I would do is close the app and reboot the computer. That just might fix things. If it does not, then scan for viruses.
Has any applications been deleted from the machine recently? If it's not a virus it sounds like something is missing.
 

Read other 1 answers
RELEVANCY SCORE 59.6

hi guys

ive a windows XP running on my system.actually i had formatted my entire hard disk, and installed XP freshly.and i have only one account activated(so it has to be the administrator) . but when i try to access User accounts in the control panel, it displays

'An Unspecified error'

what do i do??

Fidel
 

A:User accounts - unspecified error

Read other 6 answers
RELEVANCY SCORE 58.8

Ok so here is the problem..I am brand new to this website and don't know too much about computers and fixing them, but I will try my best to explain this problem as clearly as possible. I am using windows XP Home edition. For the past few weeks, whenever I log into a user account, a bunch of error messages pop up right away. They say, "The application failed to initialize properly (0xc0000022) Click on OK to terminate the application."The first one that pops up says ccApp.exe, then the 2nd one says osCheck.exe and the third one says PIFSvc.exe. When I click on the AOL icon, I am unable to use it because another error pops us that says aol.exe with the same error message as the ones before. The same also happens when I click on the icon for Norton Internet Security and it says uistub.exe. I am unable to use any of these programs. I am aware that uistub.exe , PIFSvc.exe , ccApp.exe , and osCheck.exe are all related to Symantec and Norton but I have no idea how to fix these problems and stop these error messages from popping up. I temporarily fixed the AOL error message by searching for aol.exe on my computer and sending the icon to my desktop to create another shortcut. When I click on that icon, aol loads and works fine. However, I am unable to delete the old AOL icon and the error messages still pop up for the old icon and won't allow AOL to load. I know many of you will tell me to get rid of Norton completely, but I am afraid I won't do that right now, ... Read more

A:Error Messages On Limited User Accounts Only

Yep, I'll tell you to get rid of Norton also BUT it's your choice if you go back to it or not. I believe that your Norton is corrupted and needs to be replaced or fixed. It's your choice - either waste the money on the subscription or waste your time fixing problems like this. We can recommend good, free replacements for the security apps that you're currently using.First, I would uninstall all of the Norton/Symantec stuff on the system using the Add/Remove Programs applet in Control Panel.Then, I would run the Norton Removal Tool (free from here: http://service1.symantec.com/SUPPORT/tsgen...005033108162039 ) This is essential to remove all traces of what's likely to be causing the problem.Then you can either reinstall the Norton or you can install the free apps that we recommend.Here's my list of recommended free programs:AntiVirus: http://free.grisoft.com/doc/28415/lng/us/tpl/v5AntiSpyare: http://free.grisoft.com/doc/20/lng/us/tpl/v5Firewall: http://www.majorgeeks.com/Sygate_Personal_...Free_d3356.html

Read other 12 answers
RELEVANCY SCORE 58.8

Dell XPS 400 was just connected to router, customer saked to check for viruses. avg from grisoft founf 400 threats and deleted 8. XP screen freezes on user accounts. in safe mode I checked device manger and found PCI Device w/ yellow exclamation. Reloaded drivers twice. still getting error 39. Dell supervisor says I need new mobo. Anybody know about this?

A:Xp Freezes At User Accounts, Pci Device Error 39

I'd take the advice with a grain of salt - have you used Unknown Devices or Everest to figure out what the unknown PCI device is?

Read other 1 answers
RELEVANCY SCORE 58.8

Hello,

It appears i can no longer access the User Accounts menu in the Control
Pannel. Whenever i double-click the icon, i recieve the following error
message...

"The filename, directory name, or volume label syntax is incorrect."

This also opens Notepad - which has no text in.

Is there a way i can correct this problem?

I am running Windows XP Home - Service Pack 2.

Thanks!
 

A:User Accounts Error Message when opening.

I would first scan for a virus and then post back a HiJack this log.
 

Read other 1 answers
RELEVANCY SCORE 58.8

I want to change my password, but I get an error message that states there is a critical error and will shut down in one minute.. As soon as I click on user accounts the error message comes up. The computer shuts down and restarts.  

A:Critical error when clicking on user accounts

Does this happen in Safe Mode?

Read other 9 answers
RELEVANCY SCORE 58.8

I want to change my password, but I get an error message that states there is a critical error and will shut down in one minute.. As soon as I click on user accounts the error message comes up. The computer shuts down and restarts.  

A:Critical error when clicking on user accounts

Does this happen in Safe Mode?

Read other 12 answers
RELEVANCY SCORE 58.8

Hi guys. Just done a clean install of XP. When I access User Accounts I get the following message:

Line: 4
Char: 1
Error: Access is denied.
Code: 0
URL: res://C:\WINDOWS\system32\nusrmgr.cpl/nusrmgr.hta

I've never had it before. I can still access User Accounts but this is a bit annoying. Any ideas?
 

A:Solved: User accounts Error message

Sorted it.
 

Read other 1 answers
RELEVANCY SCORE 57.2

Hiii everybody,
this is my first ever post in my first forum . That's a disclaimer to ask you guys to forgive me for having very little gray matter :-( .
I have Windows XP HOME SP2 on Intel Celeron 667 MHz and 192MB RAM. I know it doesn't sound like much so I'm always trying to read forums and tweak my settings. But this time, it ended up worse.
I used a program called autoruns.exe to adjust my startup programs so it'll start faster. I'm not sure what I turned off but now
1. It takes longer to start up,
2. I don't see any accounts (not even admin) in Control Panel - User accounts
3. I can access a directory and open files but I can't cut or copy and paste them into another folder.
4. In services.msc, most of the programs under Local with automatic setting don't start and cannot be started. I can't even see the programs under extended.
5. I have a home network but I can't access any of my other computers.
those are a few of laundry list of challenges with my computer (with me ?)
I'm even ready to format and reinstall XP but I need to copy some files before I do that.
I'm sorry for this long post but can you guys help me?
 

A:Can't cut(copy) & paste, all accounts missing in Control Panel-User accounts ...

Read other 10 answers
RELEVANCY SCORE 57.2

Hi. My name is Ron. I have been having trouble in the past day with Explorer running very slow, accessing USER ACCOUNTS in Control Panel, and I'm getting an ERROR MSG regarding two files:. PS- I have Windows XP.

1) Error Msg: mshta.exe
2) Error Msg: WERcae3.dir

A SIDE NOTE: I have PC Pandora (a logger pgm) on the computer to monitor my kids activity.

ANY HELP WITH ANALYZING THE HJT LOG WOULD BE GREATLY APPRECIATED!!

THANK YOU!

Here is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:07:02 AM, on 2/22/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\ibmpmsvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\S24EvMon.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\IBM\IBM Rapid Restore Ultra\rrpcsb.exe
C:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exe
C:\Program Files\Linksys\Linksys Updater\bin\LinksysUpdater.exe
C:\WINDOWS\system32\RegSrvc.exe... Read more

Read other answers
RELEVANCY SCORE 56.8

Hi

I'm surprised that nobody else has this problem, but I've searched and can't find an answer...apologies if I've not looked hard enough but I decided to post a question because this is 'urgent' to me.

I had 2 children's accounts in Win 8, and had local Parental Controls. Upgraded OS to Win 10, and now I can't manage Parental Controls in Win 10 locally, so I 'think' I need to set up 'online Profiles' for them.

However, all their game progress, profile settings, etc are on their local profiles - how can I get all this data to be on their online Profiles? I didn't want to copy and paste folders (such as AppData) without knowing that this was a 'safe' way to do this.

Any help would be hugely appreciated.

Rgds,
Andy

A:How to copy user accounts in Win8 to online accounts in Win10

Hello Andy,

Have a look at the following tutorial which shows how to change a local account to an online one.

Microsoft Account - Switch to in Windows 10

Hope this helps

Read other 0 answers
RELEVANCY SCORE 56.4

Hello,
I have Windows 7 Starter SP1, on a netbook PC.
I normally use an account with Administrator Privileges.
Having started the computer, at the Login screen, Standard user accounts now get an error message, something like: 
A USB device or floppy disk must be attached to enable this function.

The Standard User accounts are still shown in:
Control Panel\All Control Panel Items\User Accounts\Manage Accounts

Previously, some Windows Updates (particularly Security Rollups) had to be uninstalled and (thus not installed) because, on the second boot up following their installation, the an error message appeared on loading the Desktop
stating:
"Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service [sic]. This problem prevents standard users from logging on to the system ..."
Removing any such Updates that causing that error message cleared the error, but now without any such warning, it is now not possible on starting the computer to log on to Standard User accounts at the Login screen. 

I believe therefore there is high probability the error message at the Login screen for Standard User accounts, has been caused through a Windows Update.

How can I make it possible to once again log on to Standard User accounts, at the Login screen?
Regards,
Robert339

Read other answers
RELEVANCY SCORE 56.4

I was recently looking on techguy for a similar resolution to the below question in the forum.

http://forums.techguy.org/windows-vista-7/822354-ccleaner-not-working-when-i.html

I do not have problems using the CC Cleaner in my account (admin) but when I run the cleaner it does not clean Chrome. See, my girl use chrome for her internet browser on her user account and I use Firefox in my admin user account.

IN fact i have this problem in a lot with programs like Tversity, CCleaner and AVG.

Do I have install the program on every User account (hence taking up room on my PC because I am installing the same program twice)?

And when I use virus programs do they sift for infections through all the users etc?

Thanks kindly.

w3b3d1g1
 

A:User Accounts in Vista - Operating programs in both accounts

hello w3b3d1g1

try this (in your account) start > all programs > any program you want to share > right click on that program.> choose share.. maybe what your looking for.

hope this helps.
 

Read other 3 answers
RELEVANCY SCORE 55.2

Hello

I have been chasing up an answer to this problem for a couple of weeks now and have found a number of people with same symptoms but no answer which works.

When I go to the User Accouns page the dialog box for the "Choose the Account you would like to change" is blank.

I am an administrator and there are 2 accounts on my notebook - windows 7 professional.

I can view the accounts through the run command, but would like to know why the dialog is empty and what the fix is for this.

I have done a scan for errors - none found.

Done a complete reinstall - Accounts still not visible.

Looking on a variety of forums, this appears to have been happening to XP and Vista prior to Windows 7.

However none of the fixes for XP or Vista work (Some don't even apply).

Does anyone have a solution for this bug?

Thanks

A:User Accounts / Manage Accounts Blank

Microsoft has an article on this issue, please read this and try the solutions if you haven't already. Oh yeah, welcome to SevenForums.

Granted... It's for XP but I can't seem to find the Win7 version.

Several dialog boxes are blank

EDIT: Here's a fix for the "Windows Features" blank dialog. I figure it might tell you what your problem is as well.

Link to tutorial:
http://www.raymond.cc/blog/archives/...alfeaturesexe/
Link to program:
http://support.microsoft.com/kb/947821

Read other 4 answers
RELEVANCY SCORE 55.2

Hi all

I can't find any mention of my problem on this or any other forum. Or at least I don't think I can... Any thoughts would be greatly appreciated.

Here is my set-up:
Linksys DSL modem, connected to an Apple Airport Extreme wireless router. The modem is configured to be the DHCP server, the Airport is set to bridge mode. I have a new Compaq Presario desktop running Vista Home Basic with a Belkin wireless-G USB dongle. All of this discussion is about wireless, btw - I don't have a long enough CAT-5 cable to connect the Airport and PC.

I have 5 users set up on the PC - 1 true, unlocked administrator account and 4 standard users. When I boot up and connect as any of the 4 standard users they automatically detect and connect to the Airport, and receive IP addresses.

But when I change user to be the administrator the connection drops after a few seconds. The Airport network is visible to Vista, because it is in the list of available networks. But if I try to connect to it it fails, and the Vista diagnostic tool tells me it has been unable to connect 'for unknown reason'. One of the standard users used to have admin rights, and that account had exactly the same problem. If I log in from a boot-up as the administrator I also cannot connect to the network.

If the administrator account has been used and logged out the other users cannot connect to the Airport. I have to re-boot before they can connect again.

I also have a MacBook and a Nokia N95, bo... Read more

Read other answers
RELEVANCY SCORE 53.6

I cannot open User Accounts in Control Panel, I keep getting ...

Microsoft (R) HTML Application host has encountered a problem and needs to close.

Anyone with a fix? . My appreciations in advance!
 

A:"User Accounts" in Control panel wont Open-Error is "Html application Host Error"

Do you have a recovery restore install disc or partition?
You can try doing a repair or system file check...
Scan For Missing/Corrupt System Files...

Windows XP comes with a wonderful tool called System File Checker (SFC)
Itscans and verifies the versions of all protected system files after you restart your computer...
To Do This:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following command:
SFC /scannow
And then click OK
You must be logged on as a member of the Administrators group to run SFC..
You will need your Windows XP CD during this procedure if SFC needs to get an original file. Please remember that Windows XP can have multiple instances of a .DLL file and remember which version is for which program.
Notes....
I have been asked if it is possible to have a "progress meter" show when SFC runs... This is the registry hack you need. PLEASE do not go messing with your registry if you do NOT know what you are doing!
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: SFCShowProgress
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hi all,

Hoping someone might be able to help. Recently, a few strange things have happened with the PC, which first started when I found I couldn't use the Backup & Recovery software in Windows 7. Whenever I clicked on one of the buttons with a shield, nothing would happen at all. I've looked around and just can't find the solution to this. However, today when trying to fix this, I've come across a new user account in the permissions section. The name is jvactaett - I certainly haven't made this! Does anyone have any ideas how this account has got there, and how I can remove it? It doesn't show in user accounts through Control Panel.

I've put a screenshot as well. To get there, I right clicked a hard drive and went to properties, Security, Add, advanced and then clicked Find Now.

I don't know if the two things above are linked or not...
Thanks!

A:Unknown user showing in user accounts - possibly compromised?

A further observation is that when I do sfc /scannow through cmd, it stops at 59%. Same problem as this post, but didn't follow all the things that were replied as I didn't know if they were relevant to me...

Windows Firewall Service unable to activate, SFC scan unable to work

Read other 9 answers
RELEVANCY SCORE 53.2

Or tell me how to automatic logon hiden user ?2, when user ?1 logon in normal mode.

Read other answers
RELEVANCY SCORE 52.8

I am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts and there are SID keys for each of these users in the registry.

Now when we create a new user, the account is created without any problems. The user shows up on the logon page and after running the net user command, it shows up there as well. When I try to logon with the new user, I get a message: The User Profile Service failed the logon. User profile cannot be loaded.

None of the new user accounts show up in the registry. The other anomaly that I see is that the Default User folder is missing in each of the Users subdirectory for the three accounts where I have no problems.

I have read the Microsoft Knowledge Base Article 947215 and none of the methods apply to my problem. I also checked Local Group Policies and the Do not logon users with temporary profiles setting is not configured. I would appreciate any thoughts that anyone has this problem.

A:User accounts created but not able to logon - No user profile

Pixel, welcome to Sevenforums!

Have you tried a system restore yet? select a point before the problem began: System Restore
Try a repair install: Repair Install
Important! Read the warning box in the tutorials just in case they effect the user or your class
Credits: Both tutorials created by Brink

Let me know which of these tutorials you are able to do, and if they correct the problem.

Read other 4 answers
RELEVANCY SCORE 52.8

I am using Vista Home Premium 32-bit and I am having problem logging in using my user account. An error flagged "The User Profile Service service failed the logon. User Account/Profile cannot be loaded."

The Event Viewer window has these details:

Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-2363711691-2099609217-1737805787-1001_Classes:
Process 944 (\Device\HarddiskVolume1\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2363711691-2099609217-1737805787-1001_CLASSES

I was able to logged in through Safe Mode but still an error flagged in status bar that the profile was not properly loaded.

Although I was able to copy all data from that user account to a new account, can I still troubleshoot the problem and be able to log in using the old user account? I have all my shortcuts and archives there and "every customized thing".

Any help would be greatly appreciated. Thanks.

A:User Registry Leaks - Problem on User Accounts

Hi aice and welcome to Vista Forums

Have you checked the information in the following Tutorial?

The User Profile Service failed the logon. User profile cannot be loaded.

Read other 3 answers
RELEVANCY SCORE 51.6

The other day I went to delete one of my user accounts and found a password protected user by the name of Machine ASP....'s which did not show up when log ging in, only in user accounts. I deleted it as there was no way of accessing the account to see what was in it but was wondering if anyone might know how it could have got there. I have norton internet security, norton antivirus and sygate pro firewall. No one else has had access to the computer either(at least not from my home). Any help appreciated.
 

A:Unknown user Machine ASP...in user accounts

Read other 6 answers
RELEVANCY SCORE 51.6

Hello,I got some tips a couple of months ago on tweaking your pc. I did alot of tweaks and guess what? Silly me I didnt back up the REGISTRY!!!!! I also installed Windows Transformation Pack 6. This is what happens when I try to go to Control Panel> User Accounts, and try to click the 3 tabs under "Learn About" . automation server cant create object Now these tabs have crosses next to them So I must of disabled a service or something? I can create accounts. but I gotta log out, and log in other one. I cant quickly switch over while having 2 or 3 accounts logged in at the same time. When I try to switch users, it doesn't do it. Please help!Thanks.

A:User Accounts & Fast User Switching

I believe that if the Terminal Service isn't started then fast user switching isn't available.To start the Terminal Service, go to Control Panel, Administrative Tools and click on Services. Right click on Terminal Service and select Properties. Make sure the startup type is set to Automatic.Also, see this Microsoft article on fast user switiching.

Read other 1 answers
RELEVANCY SCORE 51.6

Hello all,

I have a question. I've been using a batch file to delete users from our computer lab here in campus. That batch file worked beautifully for Win 7, but not sure for win 8.1. We've been having problems with the accounts either not loading correctly, being corrupted, black screens, not getting the GPO. So I am not sure if the delete script is causing any issues.

Below is the batch file:

@echo on
SET rootKey=HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

CLS

:check_users
FOR /F "DELIMS=" %%i in ('DIR "C:\USERS" /B /AD') DO CALL :remove_old_profiles "%%i"
GOTO :eof

:remove_old_profiles

SET dirName=%~1

:custom
IF /I "%dirName%" EQU "Default" GOTO:eof
IF /I "%dirName%" EQU "Administrator" GOTO:eof
IF /I "%dirName%" EQU "administrator.CLCSEC4-134569" GOTO:eof
IF /I "%dirName%" EQU "Default User" GOTO:eof
IF /I "%dirName%" EQU "Public" GOTO:eof
IF /I "%dirName%" EQU "All Users" GOTO:eof
IF /I "%dirName%" EQU "%USERNAME%" (
ECHO Hey! You can't delete yourself, Mr. or Ms. %USERNAME%.
GOTO:eof
)
@ECHO Removing Profile List Sub Key...
FOR /F "DELIMS=" %%a IN ('REG QUERY "%rootKey%" /s /d /f C:\users\%dirName%') DO REG DELETE "%%a" /f
@ECHO Removing C:\Users\%dirNa... Read more

Read other answers
RELEVANCY SCORE 51.2

Not sure where to post this.

I am trying to run the script from here:

Script to parse .txt & move Computer Accounts to different OU

I am getting the same error the user was getting in the OP, but he does not give the answer how it was fixed. I'd like to find out if anyone knows how to get rid of that error.

A:Script to parse .txt & move Computer Accounts to different OU

Try this, report back I probably have not got it right first time, but have corrected two syntax errors.

Option Explicit

Dim strFile, strTargetOU, objFSO, objFile, objOU

Dim objRootDSE, strDNSDomain, objTrans, strNetBIOSDomain

Dim strComputer, strComputerDN, objComputer

Const ADS_NAME_INITTYPE_DOMAIN = 1

Const ADS_NAME_TYPE_NT4 = 3

Const ADS_NAME_TYPE_1179 = 1

' Specify text file of computer NetBIOS names.

strFile = "c:\Computers.txt"

' Specify target OU to move computer objects into.

strTargetOU = "ou=SrAccounts,dc=MyDomain,dc=com"

' Open the file for read access.

Set objFSO = CreateObject("Scripting.FileSystemObject")

Set objFile = objFSO.OpenTextFile(strFile, 1)

' Bind to the target OU.

Set objOU = GetObject("LDAP://" & strTargetOU)

' Determine DNS domain name from RootDSE object.

Set objRootDSE = GetObject("LDAP://RootDSE")

strDNSDomain = objRootDSE.Get("DefaultNamingContext")

' Use the NameTranslate object to find the NetBIOS domain name from

' the DNS domain name.

Set objTrans = CreateObject("NameTranslate")

objTrans.Init ADS_NAME_TYPE_NT4, strDNSDomain

objTrans.Set ADS_NAME_TYPE_1179, strDNSDomain

strNetBIOSDomain = objTrans.Get(ADS_NAME_TYPE_NT4)

' Remove trailing backslash.

strNetBIOSDomain = Left(strNetBIOSDomain, Len(strNetBIOSDomain) - 1)

' Use the NameTranslate object to convert computer NetBIOS

' names to Distinguished Names.

objTrans.Init ADS_NAME_INITTYPE_D... Read more

Read other 5 answers
RELEVANCY SCORE 50

Hello all -- I was reading an article about managing passwords in XP and followed its' instructions.
I went to Start/Run and entered "control userpasswords" at that time the 3 accounts that I have put
on the computer showed, along with another that I did not knowingly authourize or even know about.
The suspicious account is a limited account -- password protected and has the title "ASP.NET Machine A..."
(thats exactly what it says). asp.net seems to be a microsoft sponsored site -- I guess.
My concern is that I have recently had and removed spyware from this pc and I did not knowingly authorize this account nor have I heard of ASP.NET prior to this. I really want to delete this account but I am more courious as to how it got there. I am your everyday home pc user with limited knowledge of much more that the color of my computer. Please advise. Thank you.
Oh yeah -- the ASP account only shows when I go to the start/run and access user accounts that way -- to access user accounts through control panel does not show the asp.net account.
thank you
originaljw

A:Unknown User In My "user Accounts"

ASP.net is put there by Microsoft when you installed the .NET thru Windows Update. Not to worry.

Read other 5 answers
RELEVANCY SCORE 49.2

The following pop up error message appears when I try to double-click on an external drive from My Computer:Windows Script HostCan not find script file "H:/FS6519.dll.vbs"I have posted my hijack this log. Any help would do, thank you.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 3:51:43 PM, on 2/2/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\SYSTEM32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\SOUNDMAN.EXEC:\Program Files\Thomson\SpeedTouch USB\Dragdiag.exeC:\Program Files\Common Files\InstallShield\UpdateService\issch.exeC:\Program Files\Java\jre1.6.0_03\bin\jusched.exeC:\Program Files\iTunes\iTunesHelper.exeC:\Program Files\Yahoo!\Yahoo! Music Jukebox\ymetray.exeC:\Program Files\Last.fm\LastFMHelper.exeC:\Program Files\Yahoo!\Messenger\ymsgr_tray.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\Alcohol Soft�... Read more

A:Displays Error: Windows Script Host, Can Not Find Script File "h:/fs6519.dll.vbs"

Welcome to the BleepingComputer HijackThis Logs and Analysis forum. My name is Richie and i'll be helping you to fix your problems.Apologies for the late response,as i'm sure you can appreciate we are extremely busy.If you've already recieved help at another forum and your issues have been resolved,or you're presently recieving help elsewhere then please let us know.If you have not followed the info in the link below prior to posting your log then please do so now:Preparation Guide for use before posting a HijackThis Log:http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/If you still require help,please post a new Hijackthis log into this topic in your next reply.Also post a detailed description of the issues you're experiencing.*Note*Post all reports/logs directly into this topic,not as attachments,thanks.

Read other 1 answers
RELEVANCY SCORE 49.2

Hi

I'm getting this error message.
I did a google search and found this: You receive a "The User Profile Service failed the logon
But did not help me. I also did a search here and found a few topics with this error message though they didn't solve my problem either, because mine problem seems to be different.

I can login to existing accounts. But I can't login to new ones.
So when I go to the registry editor there's no folder for the new accounts. They just don't exist at all. Only the existing ones.
I create a new user account at the Users menu in Control panel and they show up at login screen. When I click them, it starts the waiting icon saying "Logging in" then after a few seconds, this error message pops up. I can click OK and then it says "logging off" and goes back to the login screen.
I do have access to an administrator account and a standard account, I can log in to both

I don't have any system restore points before this started happening. i'm using ESET Smart Security as my antivirus but I don't think it's causing the problem, I uninstalled it and it didn't work then either so I reinstalled it back.
Please help me what could be wrong?

A:Can't create new user accounts "The user profile service failed..."

Can you yell us when the problem started and were you on the system when it is doing this if so what were you doing when it started.

Read other 4 answers
RELEVANCY SCORE 48.4

I'm currently trying to use my LG Rumor 2 to act as a modem for a dialup connection with my bluetooth capable computer. Everything is working great but my university, which I'm trying to connect to, requires a ppp script setup and I need to use the terminal window. So the computer dials correctly and everything works but when the terminal window appears I can't type anything although the text field appears for the username. Also, within a few seconds of the terminal window appearing I get the error "The Script has Halted." I can however right click and paste in text (but i don't know if that's relevant). Here is what I see:


Any suggestions?

A:Trying to Dial-Up via Bluetooth with a PPP script error: The Script has Halted

Any ideas?

Read other 1 answers
RELEVANCY SCORE 48.4

I keep receiving this error everytime starting up my laptop. Can anyone help me?

really appreciate it.
sorry for my bad engrish.

Read other answers
RELEVANCY SCORE 48.4

Hi,

I have a user listed in C:\Documents and Settings that is not listed in "user accounts".

If if simply delete it then it comes back later.

The only thing in it is a thunderbird profile which I don't believe is active anymore.

Any help would be appreciated.

Thanks,

Mike

A:Delete user that's in docs and settings but not in "user accounts".

Does the User Profile show up in System Properties?

Read other 2 answers
RELEVANCY SCORE 47.6

Hi I was wondering if anyone could tell me how I can make it so that when i turn on my computer, it doesn't ask me for a username or password? I recently got a new computer, and my old one had XP on it like this one, but i didn;t need to have a username or password. On this one, my username is already there and I don't have to type a password I can just click ok, but there must be a way for me to turn my machine on without going through this part.

Thanks.
 

A:User Accounts

http://8help.osu.edu/2063.html

You can also do it with the XP PowerToy TweakUI.
 

Read other 1 answers
RELEVANCY SCORE 47.6

I have a Windows XP and I am (obviously) having trouble. Before, I had three accounts set up on the laptop, two days ago I checked and two were admin. and one was limited. However, since yesterday, it has been asking for a password to enter my main account. I thought nothing of it until I had to access one of the other accounts. I logged off and it wouldnt take me to the Welcome screen. When I checked under USER ACCOUNTS in the CONTROL PANEL it only showed that account and said it was limited, so pretty much I only have one account on my computer and cant add the other ones back on because this one somehow got set to limited. I don't know how any of this happened but how do I fix this so that I can add another account?
 

A:HELP! User accounts

Have you tried restarting into safe mode (tap F8 on bootup) and using the default Administrator account, which either shouldn't have a password or will have the one you set when installing?

I'd also take a look under Control Panel>Administrative Tools>Computer Management> Local Users and Groups>Users. see whats listed there.

Also check Control Panel>System>Advanced>User Profiles and C:\Documents and Settings

Anyway let us know how you get on.
 

Read other 3 answers
RELEVANCY SCORE 47.6

I have a compaq which i use at home for the family (O/S windows XP home) and nothing to important on it I was recently infected with trojans and was trying to clean them out I think i have my account (administrator)cleaned and running but the other accounts seem to run real slow one in particular could take a full minute for somthing to happen( like clicking IE or even a program from the all programs list)

What I would like to know is can i delete these other three accounts and then start new ones

I should add that these other accounts get 2 error notices when you open them that i'm positive are related to the trojans I tried to clean

Any Advice Appreciated

Thx
 

A:User Accounts ??

Read other 6 answers