Over 1 million tech questions and answers.

Can't go restore back past 2 months?!

Q: Can't go restore back past 2 months?!

I looked through some archives for my needs and I am not really seeing anything specific to my issue.
If you have a link to previously posted I will use it if not, I kindly am asking for help.
Trying to do a system restore on my machine and it wont let me go back any farther than 12-2010
Is there a way to go back father into the year?
I need to restore at least 6 months behind today's date.

RELEVANCY SCORE 200
Preferred Solution: Can't go restore back past 2 months?!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Can't go restore back past 2 months?!

Read other 6 answers
RELEVANCY SCORE 66.4

For the past week, I have not been able to back up files from the Windows Vista "Backup and Restore Center", nor can I perform a System Restore. The ?Backup and Restore Center? launches, but gets stuck at 25% completed (I believe at the ?Creating disk image? stage?) for at least 3 hours, while it used to only take 10 or 15 minutes to back up files until last week. System Restore attempts to launch, even asking me for administrative permission to open, but seemingly does nothing after 30 minutes. When I attempt to see if the System Restore process is running in Task Manager, my laptop slows down and won?t let me do anything else.

Whenever I try to back up files or perform a System Restore, my laptop immediately slows down to a crawl and I rapidly cannot use any other programs. When this happens, I am forced to restart my computer by holding down the power switch since Task Manager won?t close any programs and I cannot shut down or restart my computer in Vista. A few times after restarting, my laptop has automatically run chkdsk, although I didn?t really pay much attention to the results of those scans. In general, even without trying to back up files or perform a System Restore, my computer runs slower than usual during typical tasks and will sometimes grind to a halt.

I have performed the hard drive memory tests as recommended by Dell hardware support with no reported issues. I have also performed full scans for viruses/malware with McAfee AntiVirus and Malwa... Read more

Read other answers
RELEVANCY SCORE 59.6

OS: Win 8 pro

System: x64

Originally, there was no windows in my laptop since I bought the DOS version. But the first OS that I installed was win 8 pro and I switched back to win 7 ultimate at some time and finally switched back to win 8 pro. Both are full retail version.

Age of system: 8 months

Age of installed OS : 1 month

CPU: Intel(R) Core(TM) i7-3630QM CPU @2.4GHz (Quadcore but my dxdiag says that I have 8CPUs?)

Video Card: NVIDIA GeForce GT 750M

MotherBoard: I tried with CPU-z but it says invalid in motherboard field. So I googled and found out that I can use cmd to find it. Below is some command that I type through google. Not sure which one is my motherboard model.


Power Supply: Lenovo 19.5v == 6.15A

System Manufacturer : Lenovo

Model Number: YB00192238

I've been getting BSOD since early october. I already tried to use system restore back to previous month before I got BSOD and still getting it.
I've tried to re install windows several times and still get this BSOD.
There was a time I was just freshly installed the windows and in the middle of installing drivers of my laptop and I got BSOD.
I noticed I only get BSOD if I connect to the internet, specifically while browsing or downloading. I never get BSOD while being offline.
So here I am, finally given up on how to solve this and search for help from expert.

Thanks in advance for the input.
Apologize if I happen to miss some details.

A:BSOD for the past months

UPDATE:

I've run the driver verifier and I got a bsod.
I have re attach the new dump and all other things in this post.
I will update on RAM, HDD and initial later.

Read other 4 answers
RELEVANCY SCORE 59.6

Hi, I am getting this BSOD from past 6-8 months, i switched over to win 7 from XP (in XP also i suffered same problem), few days the Win 7 had no problem but after that every time i start my comp i get at least 4-5 times BSOD n the system keeps on going to safe mode.

Kindly help me.




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000008C
BCP2: 00000002
BCP3: 00000000
BCP4: 88DD3FF1
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102012-15303-01.dmp
C:\Users\Arun\AppData\Local\Temp\WER-32385-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Getting this BSOD from past 6 months.

Please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with your crash reports, and we will do our best to give you troubleshooting steps to fix the crashes.

Read other 1 answers
RELEVANCY SCORE 59.6

Well Ive had the BSOD but finally after sorting out the issue & changing the RAM I had no BSOD issues for few days but this has started again & the error I get is "IRQL_NOT_LESS_OR_EQUAL", which according to me is the driver issues..!!!

Can anybody please specify me the solution..???

Some Extra INFO

System 2.5 Years old [New RAM, 15 days old]
OS installed on 1st Jan 2011 [fresh retail install]
No over clocking done
Have had no issues on LINUX

EDIT: - Changed attached flies from txt to dmp

A:BSOD for the past 8 Months

Welcome to Seven Forums.
While your at it please take the time to fill in all your system specs. here
Attachment 129940

It will be needed to fully help you.
Thanks.
Fabe

Read other 9 answers
RELEVANCY SCORE 58.8

Ever since I built this PC I've had BSODs every so often. I've not been able to trace them to any particular source, but lately they seem to be getting a lot more frequent and I am getting fed up, so I figured I would try asking here.

I've used the SF Diagnostic Tool to gather the requested information and attach it to this thread.

The most recent one seems to suggest a problem with the CPU. It's been suggested to me that my CPU might need a microcode update - I installed SiSoft Sandra Lite which is able to check the CPU microcode level and indeed it does suggest it isn't on the latest version, but as far as I can tell there is no procedure for manually updating microcode, you just have to wait and hope it comes down through Windows Update or something.

Can anyone help?

A:Intermittent BSODs over the past few months

Welcome to SF Dan .

The dump files are not showing a definitive cause but most of them are 0x1A, so the best course
of action in these type of situations is detailed in the quote below.








  
Quote: Originally Posted by Arc


Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.








  
Quote: Originally Posted by Arc


First run it with all the existing/installed RAM modules. If it comes with no error, all is good.

But if it starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
testSlot1Slot2RAM1ErrorErrorRAM2GoodGood It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2RAM1ErrorGoodRAM2ErrorGood ... Read more

Read other 1 answers
RELEVANCY SCORE 58.8

i've been getting these BSOD
Please help

A:BSOD for the past few months 0x0000001e

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 3 answers
RELEVANCY SCORE 58.8

I'm on 8.1 and it's almost always when playing World of Warcraft or sometimes just using Firefox. The most recent BSOD a minute ago was KERNEL_SECURITY_CHECK_FAILURE.

Blegh.

A:Daily-ish BSOD past few months :(

One of your dumpfiles blames Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+cf ).
Driver Description: DirectX Graphics MMS./ this is probably related to your videocards and you mentioned that the bsods mostly happens when gaming.

In your msinfo32 report i found:





<Device><![CDATA[Intel(R) HD Graphics 4600]]></Device>
<PNP_Device_ID><![CDATA[PCI\VEN_8086&DEV_0412&SUBSYS_D0001458&REV_06\3&11583659&0&10]]></PNP_Device_ID>
<Error_Code><![CDATA[This device is disabled.]]></Error_Code>



.

Why is this device disabled did you have problems with it?
How did you disabled it, through device manager or did you disabled it in your Biossettings?.
Your Logitech G710 keyboard drivers are outdated(2009), please update the latest drivers from here Support + Downloads: G710 Mechanical Gaming Keyboard - Logitech and also update the drivers(2012) for your Logitech HD Pro Webcam C910.

Please also update your Intel Watchdog Timer driver(2010), it is (probably) part of the intel mangement engine.
Check the support/driver downloadsite of your OEM model or system(mainboard) for the latest windows 8.1 driver here GIGABYTE - Motherboard - Socket 1150 - GA-Z87X-D3H (rev. 1.x).
And please also update all the other drivers to the latest version.

If theBSOD's continue, I'd suggest running Driver Verifier according to theseinstructions: Driver Verifier Se... Read more

Read other 8 answers
RELEVANCY SCORE 58.8

Hi everyone! I've received 3 bsod the past 2 months, i don't really know where they are coming from but maybe its cause i rarely turn my Laptop off all the way. i usually put it in sleep mode. Anyways here the little windows that popped up once i turned it back on. the most recent one came when i turned my laptop on from sleep mode, maybe around 10 minutes in it just happend.Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA80115B94E0 BCP3: FFFFF80000BA2748 BCP4: FFFFFA80111327C0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1Files that help describe the problem: C:\Windows\Minidump\021412-32916-01.dmp C:\Users\Eddie\AppData\Local\Temp\WER-73788-0.sysdata.xmlRead our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txtI tried going to the "files that help describe the problem" while the window was up but it wouldn't let me open them. Once i clicked check for solutions, the .xml file disappeared. The dmp is still there but it won't let me open it, it says access denied. I am the admin on this computer.Thanks for the help! off to school now.

A:BSOD out of no where 3rd time past 2 months.

Don't bother checking for solutions. Can't remember a time that has actually worked for me. I am also going to ignore the codes for the moment as they do not enjoy telling the exact issue at hand.

1. What are you doing when the BSOD pops up? You say you keep it in sleep mode, etc?

2. It is a very rare issue. Give us your computer specs (I recommend Speccy for a more thorough deluge of information).

3. Toss us a small list of your most used programs (that you actually have to open yourself) and any consistent programs such as Anti-Spyware and Anti-Virus.

4. There is a chance you do have a minor (or very sneaky) virus on your computer causing the issue. Run a thorough virus scan via Avast or maybe Avira (free-versions) and nab yourself Comodo (free again) while you are at it.

5. Finally (and last on the list) how often do you actually turn off your computer? What are your core temperatures? When was the last time you applied Thermal? Can you cook an egg on the darn thing? Let us know.

Read other 11 answers
RELEVANCY SCORE 58.8

Hi people,
I have facing this crashes for a past 3 months , i had windows 7 home premium 32 bit version which had the same problem now for time being i switched over to windows xp for trouble shooting but still the problem persists with random crashes

My specs are
AMD athlon II x2 @2.8Ghz
2*1GB transcend ddr2 ram
currently running windows xp sp2 professional 32 bit

posting my dump file along with this post , hoping for some valuable help . Really fed up because of this PC problem in the midst of my studies

Thanks in advance

A:Frequent crashes for the past 3 months

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\jai007\Windows_NT6_BSOD_jcgriff2\Mini030812-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_rtm.040803-2158
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c700
Debug session time: Thu Mar 8 04:05:52.203 2012 (UTC - 7:00)
System Uptime: 0 days 0:20:13.778
Loading Kernel Symbols
...............................................................
.........................................................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 10000050, {acc81a28, 0, b9dfc35c, 0}
Could not read faulting driver name
*** WARNING:... Read more

Read other 1 answers
RELEVANCY SCORE 58.8

I'm throwing in the towel.
I have received numerous BSOD's over the past 8 months or so. They reference different errors, but most are memory related. The last one (today) was saying that I was attempting to execute non-executable memory.

I have not had a lot of time to sit and fix the issue. I finally decided to come here and get help.

I am attaching the required zip files.
By the way, this happens on all 4 accounts on the computer, not just admin, etc.
The dump files are processed from my personal account, which is also the admin account.
Do I need to attach the zip files from every profile on the host?
Please help asap!

- x86 (32-bit) on 64 bit hardware
- it is the original OS
- OEM : Home Vista Premium
- What is the age of system (hardware)? roughly 4.5 years old
- What is the age of OS installation? roughtly 4.5 years old
- video card: ATI radeon HD 3600+ 1GB
- RAM: 4GB
- CPU: athlon dual core 2.5 Ghz

A:Tons of BSOD over the past several months

Adding my minidumps.

Read other 27 answers
RELEVANCY SCORE 58.8

Well the problem is that it is slow and i think they have some unwanted virus on there which wont leave even tho i do system recovery and many other virus protection program has told me there was no errors.I cant reboot bc my dvd drive wont work it stills open but the light.The only time my computer work finely is after a update or recovery.Please help me with this problem?My computer is a acer extensa 5620 and has windows vista.

A:Hello everybody for the past two months i been having problem with my laptop

Quote:




my dvd drive wont work it stills open but the light




I'm not sure what you mean by this?
What is the make and model of your computer? You may have a Recovery Partition on your computer. If you start up your computer, you may have a quick message over the logo that says Press (key) to Enter Recovery, sometimes this is F11. If so, this will set your computer back to Factory Defaults. This will remove all personal data, so backup first.
If you do not have a recovery partition, then read up on the link in my signature PC Running Slow? And try those things.

Read other 1 answers
RELEVANCY SCORE 58.8

Thats right, ive gotten BSoD 41 times in the past 5 months (Since I got my computer) Im pretty mad as it seems to happen while playing Minecraft or while web-browsing (witch are the 2 things I do most ) but it has happened right on start-up. It would be so great if someone here could help me out, and finally get this problem resolved. Thanks in advance . ~Happiness1
Questions:
? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full Retail Version
? Age of system (hardware) Around 5 months.
? Age of OS installation - have you re-installed the OS? 5 months (never re-installed)
? CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
? Video Card: NVIDIA GeForce 9500 GT
? MotherBoard: Board: Intel Corporation DG41WV AAE90316-102
Serial Number: BTWV104006QE
Bus Clock: 266 megahertz
BIOS: Intel Corp. WVG4110H.86A.0015.2010.1111.1718 11/11/2010
? Power Supply - brand & wattage: I dont know :/ (Cant remove it)
? System Manufacturer: Custom built
? Exact model number (if laptop, check label on bottom): Custom built

A:BSoD... 41 times in the past 5 months.

Hi -

Probable issues with RAM are a likely cause.

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Before you run memtest86+. . . .

- remove Daemon Tools/ Alcohol 120

- Run the Driver Verifier -- http://www.sysnative.com/0x1/Driver_Verifier.htm

I see several old drivers in the dumps. If BSODs are software related, D/V can help find the culprit.

Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-22245-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 12 15:16:32.395 2011 (GMT-4)
System Uptime: 0 days 1:18:32.112
Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3c8 )
BUGCHECK_STR: 0x1a_403
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: iexplore.exe
FAILURE_BUCKET_ID: X64_0x1a_403_win32k!SURFACE::bDeleteSurface+3c8
Bugcheck code 0000001A
Arguments 00000000`00000403 fffff680`00027b78 ba500000`a2c62867 fffff680`00007b78
BiosVersion = WVG4110H.86A.0015.2010.1111.1718
BiosReleaseDate = 11/11/2010
SystemManufacturer =
SystemProductName =
MaxSpeed: 2930
CurrentSpeed: 2926
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-15428-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
... Read more

Read other 7 answers
RELEVANCY SCORE 58.8

I've been getting seemingly random BSODs on my Win8.1 box for months now. There are several different errors that show up, and most of them seem to point to the drivers. I have no idea which driver could be causing the issue though, as I've reinstalled the majority of them.

A few I can remember:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
ATTEMPTED_EXECUTE_OF_NON_EXECUTE_MEMORY
TIMER_OR_DPC_INVALID

Bluescreenview points at ntoskrnl.exe for nearly every one of them, though some have others thrown in as well such as usbehci.sys, dgxkrnl.sys, and ndis.sys

I'm at a loss of what to do at this point. Some days I only get one BSOD, other days I get 5+. It's really starting to be an issue.

A:BSODs over the past few months. Many different reasons

MSINFO32 report is missing. Please do this:





MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

If you're having difficulties with the format, please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "msinfo32 /nfo %USERPROFILE%\Desktop\TEST.NFO" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the TEST.NFO file. If you have difficulties with making this work, please post back. Then zip up the .nfo file and upload/attach the .zip file with your next post.



Out of 11 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level d... Read more

Read other 9 answers
RELEVANCY SCORE 58.8

Hi there!
 
So as the title suggests, I've been having multiple BSOD's over the past few months that appear to be getting more frequent. I'm not sure if they're related as some of the error codes are different while others are the same. Hopefully you guys can help me here.
 
I'm going to be posting the BlueScreenView info on each as well as providing a link to the minidump file via Mediafire.
 
 
-------------------------BSOD 1--------------------------
Date: 1/13/15
 
Bug Check String: SYSTEM_SERVICE_EXCEPTION
 
Bug Check Code: 0x0000003b
 
Parameter1: 00000000`c0000005
 
Parameter2: fffff800`02e79c60
 
Parameter3: fffff880`0b36bf90
 
Parameter4: 00000000`00000000
 
Caused by Driver: dxgmms1.sys
 
Caused by address: dxgmms1.sys+c0a1
 
Crash Address: ntoskrnl.exe+75bc0
 
Minidump link: https://www.mediafire.com/?ba7i017yp33fn40
 
-------------------------BSOD 2--------------------------
Date: 5/8/15
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code: 0x000000d1
Parameter1: 0000001d`684b4562
Parameter2: 00000000`00000007
Parameter3: 00000000`00000001
Parameter4: fffff880`04bc39f7
Caused by Driver: nvlddmkm.sys
Caused by address: nvlddmkm.sys+fe9f7
Crash Address: ntoskrnl.exe+76e80
 
Minidump link: https://www.mediafire.com/?ts1m9m3668dl31f
 
 
-------------------------BSOD 3--------------------------
Date: 7/4/15
Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check ... Read more

Read other answers
RELEVANCY SCORE 58.8

On my C: Drive that is SSD I used to have around 38GB free (was even 42GB but after accidental turning the windows update on I lost to 38GB). Since I stayed at 38GB without wasting space with silly windows updates (turned off ofc) and I installed only tiny programs, I don't see how did I become from 38GB to 23GB of free space?? I may have searched files through 15K photos a month ago if such thing ever reduces disk space (such as indexing) but I checked one windows.ecb (or something like that) file was only 133MB, I don't see where all the space got lost?? I was installing a few (3-4) small programs that when I saw are of no use to me - uninstalled. I have run disk cleanup many times and I don't see where all that space went?

I may have accidently enabled 'Windows 7 file recovery' but I made sure to disable this trash immediately, meaning I do not have any folders on the disk space that would take so much memory.

I know that sometimes if you delete a lot of files like thousands of files, 20GB + of space, the space doesn't restore immediately (whenever it comes from many deleted files) but for that reason I deleted files from removable disk, to not get any traces on the main HDD.

Is there any tool to check over the months, how your free space got lowered, I could then see on a graph if the drop of space got sudden or not, to identify what could have caused it. And I dislike using any 3rd party 'cleaners' or whatever software

A:Lost 15 GB over the past months for nothing.. realized now

You can set how much space is used for System Restore, check and see how much space is allotted and how much percent wise is being used.

Check it here:

System Protection - Change Maximum Disk Space Usage in Windows 8

Read other 19 answers
RELEVANCY SCORE 58.8

I have so many Blue Screen errors on my PC I don't know what to do with myself.

I have re-installed Windows 7 Ultimate fresh.

I have been running Driver Verifier for the past 6 hours. No BSOD so far so I am thinking it isn't a driver issue.

I have ran the Seagate HD Diagnostic Test, and everything has passed.

A lot of the time these BSOD's occur when I am gaming/streaming my games.

Specs: Windows 7 Ultimate
Video Card: Nvidia 570 GTX
Processor: AMD 1090 Thuban
Hard Drive: Seagate 500 GB
Ram: 8 GB G.Skill Ripjaw

==================================================
Dump File : 021012-14523-01.dmp
Crash Time : 2/10/2012 3:07:24 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff880`010e83d1
Parameter 3 : fffff880`082e5fb0
Parameter 4 : 00000000`00000000
Caused By Driver : fltmgr.sys
Caused By Address : fltmgr.sys+43d1
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\021012-14523-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 292,144
==================================================

==================================================
Dump File : 021012-14289-01.dmp
Crash Time : 2/10/2012 2:39:23 AM
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x0000007f
Parameter 1 : 00000000`... Read more

A:Several BSOD errors for the past few months

Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with more detailed information about your system, crashes, and error logs.

Read other 9 answers
RELEVANCY SCORE 58

Hello all. Since around the middle of October, I have suddenly been receiving BSODs, mostly DPC_WATCHDOG_VIOLATION, MEMORY_MANAGEMENT, or IRQ_NOT_LESS_OR_EQUAL. I have collected the necessary files and will upload them, with one caveat - I cleaned out the dump files a week or so ago, so I only have a few. After trolling forums for a bit, I did a few self diagnostics such as updating drivers, and that seems to have reduced the frequency. I was getting them at least once a day, but after updating the Razer Synapse program by cleanly uninstalling and reinstalling, I was able to knock a lot of it out.

I updated to Windows 10 basically the day it was released, and have not really had any problems up until this point. I generally use this computer for gaming, but it does also serve as a home office PC as well. I am very careful as to what files I will allow on my PC, and I have run multiple virus scans/Windows Defender scans. The only thing that I have seen it pick up is a false positive on Oblivion.exe (game) due to modding the EXE to be LAA. Other than that it is clean.

I also ran SeaTools, and that came back clear. I have not run chkdsk yet, but will probably run that if necessary. The only new hardware that I can recall adding in the past few months would be the Microsoft Xbox One Wireless Adapter, back near the end of October/beginning of November.

Please let m know ou need any additional information.
NICK-PC-Sat_12_12_2015__91635_67.zip

A:Receiving frequent BSODs in the past few months

There are traces of bypasses on your system.
You are required to remove bypasses and related software before support may be given.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

Read other 0 answers
RELEVANCY SCORE 58

Like the topic title says my Windows 7 computer has been getting Blue Screens on and off for a while now.  This is a fairly recent computer that I built at the start of last year.  I don't know how much help this information would be but at the start of this year I installed a new 2TB hard drive, and made a switch from WIFI to Ethernet, and sometime after that the BSODs started happening.  I bring up the Ethernet bit because one of the BSODs happened after I accidentally knocked out the Ethernet cable.
 
I decided to stop putting it off after i got two Blue Screens within the same hour today.
 
I've attached the minidump files down below.
 
Any help would be greatly appreciated.

A:Computer experiencing BSOD on and off for the past several months

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 3 answers
RELEVANCY SCORE 58

Hi there!

So I've been getting multiple BSODs over the past few months during general use. I've gotten several different stop error codes that I will list below, as well as uploading the zip file as per the posting instructions.

System service exception
Driver Irql not less or equal
Kmode exception not handled
System thread exception not handled
Page fault in nonpaged area,

Any and all help is very appreciated! I've tried updating drivers and running memtest, but the problems still persist.
Thanks in advance!

A:Multiple BSODs over past few months during general use.

Hi Salrion,

Welcome to the 8forums.

It appears I cannot read the latest dump file, this could be caused by hardware damage. I think the hard drive might be causing this.
The 2nd most recent dump file says there might be memory corruption.



Diagnostic Test

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



Diagnostics Test

HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums


   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk Disk Check - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 58

Hey everybody,
I've been getting system crashes and restarts for the past two months. It seems to be completely random and I never use any programs that are too intensive - at most photoshop. In the first day it happened, it restarted 5 times within half an hour. This was helped by me doing a system restore. Still had the problem but it was around once a day. After talking to HP support a few days ago and doing that the guy told me to do, it got waaay worse and I restored it again. It's still worse than before but slightly better.
Anyway, I have no idea what I should do. Please help!

HP p6330f refurb
Windows 7 x64 OEM,
Intel Core i3 530, 2.93 Ghz
1TB SATA HD, 6GB RAM
age - about 3 months.

Attached is the BSOD .rar and the blue screen error

A:random BSOD, restarts for the past 2 months

I suspect ZoneAlarm is the cause here. Please remove it with with this tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe

Reset the Windows Firewall. Open an elevated command prompt and enter netsh advfirewall reset.
Code:
Event[13900]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-09-20T07:23:58.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Project-Orion
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002a95b9f). A dump was saved in: C:\Windows\Minidump\092010-18049-01.dmp. Report Id: 092010-18049-01.
I believe CCleaner is deleting your memory dumps. Please disable it for now, until you determine the BSODs have stopped.

Read other 9 answers
RELEVANCY SCORE 58

I have W7, 6 memory 650 HD, quad core -2 year old hd computer. ISP CABLE 12 m speed - On net speed tests , i get 10 to 20 download speeds. I am using 335 g with, with 249g showing as still available for a total 584. .

COMPUTER is running very very slow on net and non- net, with occasional hang ups that last sometimes last as much as a minute. The Hang ups are more frequent on non- net and I sometimes get the no responding.

We checked everything that could be using extra resources and it made very little differences .

We discovered one potential problem and I seek your advice on this matter-- In the info drive properties , The box that says says " COMPRESS THIS DRIVE TO SAVE DISC SPACE " was CHECKED.

A friend said that if the g's are uncompressed , my 335g could possibly be double and the drive is overloaded causing the computer to run slow everywhere- He suggests that I just go buy a new 2 tb hd and move all my stuff over and keep the existing hd as a partial back up.
I am extremely hesitant to remove the check box for fear of what could happen.

I do happen to have everything backed up via external hd including the Operating system , but putting that in motion is something that I would like to avoid.

Anyway, I sure would appreciate your advice on this mess.

Sincerely,,,, Ralph

A:Computer running very slow over past few months

Check my signature on the link on how to safely "Optimize" windows 7. Also, this tutorial may help with any problems:
SFC /SCANNOW Command - System File Checker (by Brink)

In addition, as the optimization tutorial suggested, the more programs you have installed, the higher the chance you will have for slowdowns. Only have a single antivirus installed at any one time, and please oh please say that it isn't Avast!, McAfee, or AVG -.-

For the networking problem, go to the wireless adapter card's manufacturer's website and look for any updates to the driver software. If there are, download it, uninstall the driver on your computer, and then install the new driver.

Check your add ons and make sure they are not swamping your computer with slowdowns. Disable any you do not want or use.

Read other 9 answers
RELEVANCY SCORE 58

Hi, I am facing wifi connectivity problem from past 6 months for the same I have coordinated with call center at least 50 or more times & 4 times  engineers has visited my place & 2 times , I went to service centre , but till now my problem has'nt resolved they aren't able to identify that what the exact problem is , I am wasting my atleast one hour of time daily to get this issue resolved by my self but its not working . when ever i am contacting call center they are  navigating me to engineers , & engineers are telling there is software issues please update . I have updated every single update in my system & the same thing i am doing from last 6 months but the issue is not getting resolved. I have visited the service center of Hyderabad , I dont understand what kind of engineers HP has recruited they aren't ready to listen what customer is saying. Any way , I am fade up with this follow up with call center & their false promises & of no use of so called service centers .  I WANT RESOLUTION AT THE EARLIEST.  Kindly provide me escalation matrix of HP . I have to mail it to HP CEO. HP was known for service in my opinion , but they have proveed me fool.

Read other answers
RELEVANCY SCORE 58

Since about 7 months back I've been experiencing a BSOD on my Toshiba Satellite C655D-S5529 laptop. It would happen upon logging into my account and would only stop if I booted up in safe mode. Other people use the computer too so I can't be quite sure what may have caused it but since this week it has actually booted up twice, including now, without being in safe mode and hasn't blue screened. The BOSD always returns though so I'm sure this time will be no different. I was wondering if anyone could help me resolve this issue as I would love to be able to use this laptop again. Any help is greatly appreciated.

A:BSOD for the past several months, Error 0x0000001E

Please follow fully - Blue Screen of Death (BSOD) Posting Instructions

Use the "Grab All" option.

Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.

Read other 9 answers
RELEVANCY SCORE 57.6

Dell XPS PC was extremely stable until may of this year which is when I started getting BSODs. About 1 year prior to this I started experiencing very slow performance; startup and logon would average between 6 to 7 minutes. So, in May of this year, I added more memory, increased from 8GB to 16GB, and I added an additional internal hard drive and moved most of my media files to it, so the original hard drive contains only windows, software and my document files. I also, removed Norton Internet Security and replaced with Windows Security Essential. When I started experiencing BSODs I ran mem86tst, but it did not turn up any problems. Also, I ran Tweakbit PCcleaner which cleaned up my registry. I also ran Tweakbit Driver updater which recommend a bunch of driver updates, but I was reluctant to make that many changes so I updated only my graphics card.

Read other answers
RELEVANCY SCORE 56.8

hi,
i am new here
i have been getting bluescreen error from past months and i have donr almost everything to resolve it but it still persists...
i have given it for reformatting and the dell service put it under testing for 1 day but couldnt find the bluescreen..
i have also reinstalled windows in another partition but it occurs in that too..
it appears every morning after using my comp the night before.

A:blue screen error multiple times from past 2 months

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. Yours is from 2010. I would re-install the newest.

Read other 1 answers
RELEVANCY SCORE 56.8

Hi there this is my first post on these forums so apologies if I'm not too familiar with the layout. I'm not too computer savy so if anyone could try simplify any answers/solutions that would be great. Basically the problem is for the past few months around start up of windows 7 I was getting freezes, BSOD errors (in particular IRQL_NOT_LESS_OR_NOT_EQUAL and Page_fault_in_non_paged_area being the main ones) and my pc would be in a continuous loop of booting then freezing or shutting down and I couldn't get the pc to work. I thought the problem could be corrupted windows files so I reinstalled windows onto my computer using the isntallation disk and installed drivers and all was working fine for around 4 days. Each day my windows would have importaint updates so I installed them when prompted. One day I all of a sudden started getting the same errors I got before, PAGE_FAULT_IN_NON_PAGEED_AREA and IRQL_NOT_LESS_OR_NOT_EQUAL and no new software had been installed at this point. I have tested ram and my hard drive with no errors showing although when looking at properties of my computer I have 20GB of ram (16GB Available) not sure if this has anything to do with it (2 x 8 GB sticks 1 X 4 GB stick). Hopefully you guys can help me out and prevent me shelling out on a new rig. Thank you, Conor .
 

Read other answers
RELEVANCY SCORE 56.8

· OS - Windows 7 SP1 64-bit (Original OS) - User installed/Custom Built Desktop (Not OEM)
· 2.5 Years Old System, built Aug 2013 (All original components)
· Installed Windows 7 on Aug 2013 and reinstalled/reformated with same Windows 7 on April 4th, 2016.
 
· Intel i5-4570
· EVGA GTX 650 Ti 1GB
· MSI H87-G43
· SilverStone ST50F-ES 500W
· Primary/OS Drive: Samsung 840 120GB SSD, Secondary: WD Blue 500GB 7200RPM, Tertiary: Samsung 850 EVO 120GB SSD
· G.Skill RipJaw 16GB (2 pairs of 2x4GB) (Bought original pair in 2013 and second pair late 2015)
 
Before the reformat/reinstall, I accrued similar BSOD error codes as attached. I'll note that the frequency of BSODs has gone down considerably since I reformatted/reinstalled (Instead of once maybe 5-12 hours of activity, now its closer to once per 24-30 hours).
 
I've run various versions of MemTest86 (As well as Window's Memory Diagnostic Tool) while swapping the sticks around, checking each pairs, different slots and different combinations, all of which have resulted in no errors. I'll be running MemTest again as soon as Driver Verifier is complete. I have run SSDLife on both SSDs with no errors in both SMART and file system integrity (I can include logs if need be), I'll be running health checks on my HDD but recent checks on both SMART and file system integrity (As of Dec 2015) came back clean.
I've checked my power supply under heavy load/gaming and while idle with both... Read more

Read other answers
RELEVANCY SCORE 56.4

Hardware

ISP: Cogeco

Loc: Southern Ontario, Canada

Modem: ARRIS TM822

Router: ASUS RT-N12C1

Service Calls & Conducted Services

Service Calls: 20+

Technicians: 14

Maintenance: 5

Modems Replaced: 4

ISP recommended routers: 3

In-House Rewiring: 2

Bell Blocks Removed: 2

Drop Replaced: 3

Tap Relocation: 2
Fast Q&A

- Modem DC's with or without: a) direct computer connection, b) direct receptacle or power bar, c) phone line connected, d) router connected, or any configuration of settings, e) battery connected, f) waiting 10/20/30/60 seconds before resetting, g) doing any combination of the above

- Technicians stated our signal in the house was perfect

- Technicians stated early on that the signal from the pole has a high upstream

- Technicians who have come out during a downtime have stated 'signals are all over the place, no consistent measure'

- Technicians have stated that they are surprised the connection is up because 'your signals are in flux 10-50 dB on every stream and signal'

- Adjacent neighbours have no internet/phone/TV issues. They are also on the same plan and bundle

- Internet & Phone will disconnect every 5-15 minutes, and be down from 1 minute up to 72 hours

- We will go a week without any issues. Then for 2-5 days up to 3 weeks we will have massive disconnections, and complete service interruptions at the above times

- TV has no degradation of signal or any other issues during a down time

- Weather se... Read more

A:Intermittent Internet Issues with Cogeco, up to 72 hour Disconnects - Past 16 Months

This is cable service, right?

First--slightly off topic--the only phone in a household should not be via cable company unless the phone is only a luxury. I know that my cable company even advised my neighbor to not switch to them from a landline unless he had a cell phone.

Sounds like a problem somewhere between the place where her service branches off from the main coax cable and the modem. Maybe a loose connection; maybe a defective component; maybe a frayed cable that sometimes contacts something it shouldn't.

- Technicians who have come out during a downtime have stated 'signals are all over the place, no consistent measure'

- Technicians have stated that they are surprised the connection is up because 'your signals are in flux 10-50 dB on every stream and signal'Click to expand...

And those technicians didn't start working backward to find the source of the fault???

If the service is similar to mine outside the residence her cable connects to the company's cable and that junction should be grounded. Carefully check that connection for tightness and for absence of corrosion or rust. Clean it if necessary and protect it if that seems to be needed. Unless that connection is the source of the problem I think that it is up to the technicians to trace the problem back to the source.
 

Read other 2 answers
RELEVANCY SCORE 56.4

Hello all,

Over the past 6 months or so I have been getting random BSODs with no obvious symptoms of what is causing them.

They started happening last September after I got back from the Summer. To begin with I tried to diagnose the problem following various guides to try and work out what could be causing them. I did the following:
Memtest
Reg check
Driver Verifier
Updated Drivers
Checked for any physical damage on hardware
Tried restoring

No matter what I did I could not either fix the problem or find the cause of the problem. The main reason for this was the "ntoskrnl.exe+XXXXX" would appear each time on each crash, and searching online I could not find a definitive reason or answer to the crashes.

So I decided in the meantime to live with the possible chance that I would BSOD every now and then. For the most part this was fine as they became less frequent.

Then came today. I've had 3 BSOD in one day and now its starting to irritate me. Knowing that my previous efforts to try and find a solution were to no results, I just don't know what to do. I'm getting the point that I might just rip out all my hardware and start fresh, but that won't be for another 3 months or so.

So here are the .dmps from September till now. Looking at them in BlueScreenView the Caused Driver and Address are all different, there are some common patterns such as the "Qualcomm Atheros Driver" I did update this but ended up making the problem worse, as it made m... Read more

A:Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

Update Atheros LAN driver from http://www.gigabyte.in/products/prod...px?pid=4144#dl

Code:
BugCheck D1, {28, 2, 0, fffff880018fc360}

*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+6a5f )

Followup: MachineOwner
---------

Code:
Image name: L1C62x64.sys
Timestamp: Wed Apr 25 10:37:17 2012 (4F978685)
One more thing is there .... Agnitum Firewall. I dont know what is it, but as it is contributing to the BOSDs, it should be uninstalled. Probably it is branded as Outpost.

Code:
fffff880`03319e68 fffff880`04d84738Unable to load image \SystemRoot\system32\DRIVERS\afwcore.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afwcore.sys
*** ERROR: Module load completed but symbols could not be loaded for afwcore.sys
afwcore+0x59738

Code:
fffff880`03319d48 fffff880`04d1d000Unable to load image \SystemRoot\system32\DRIVERS\afw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
afw
Let us know the situation after doing these two.

Read other 3 answers
RELEVANCY SCORE 56

Hello everyone,

I need guidance regarding how to do system restore to a restore point 6 months or even older.

Os i have: xp sp3

Around about 2 weeks back i upgraded my system to sp3 for that i created system restore point.

But the problem is when i go to do system restore it doesn't show me the restoration point about 2 weeks old in the list rather it only shows and allows to new restore points created within 5-6 days and that does not include that restore point which i created b4 sp3 installation.

So.Is there a way to do system restore to a restore point 6 months or even older? does window allows it or any third party software which helps me retain older restore points?

Note-i tried doing it via safe mode also but didn't helped, also the space alloted for system restore is maxed out.

Thanks in advance

A:System Restore(How to restore to 6 months or more restoration point)

System Restore was never designed to reverse the major changes made by a a service pack update. For that reason all prior restore points will be deleted.

System Restore works best when used as soon as possible after a problem develops. On the few occasions I have used the feature it has always been with the most recent restore point. The further back you go the more likely the restore will fail or cause more problems than it solves. Going back 6 months is almost certain to fail. System Restore was never designed for that.

Why do you need to go back that far? There is almost certain to be a better way.

Read other 7 answers
RELEVANCY SCORE 55.2

Due to what I can only guess was,a virus attack,,I had to restore my computer back to factory state from the "System recovery" drive D.This meant of course, losing all my files and applications.However ,the process includes a file back-up feature ,which should be a good thing,,right?
I followed the restore procedure to the letter and apparently succeeded in backing up all my files,documents,etc,.,,62.5 gb to be exact,to an external drive.
Once my comp was restored back to factory and was operating normally,I followed the back up file restore procedure ,that being ,click on the Back-up.1 application.) the only visible item in the BACK-UP FOLDER on the External hard drive.)
The process started normally,,indicating that the files were being located,and proceeded to step 2 which then indicated "restore in progress".This is where it stays,,the progress bar does not move from 0%!!!!!I left it on over night so,,"please wait" is not a factor here!
To sum it all up..the "restore-files" is not functioning.I have even attempted the procedure from the control panel/back up and restore center only to be told that "there are no restore files on this computer",,this is odd,,since I copied the folder from the external drive to the comp hardrive.
So,,the files are there but they are invisible and un-accessable without some HP program..what now?I really do not want to lose the data,
please ,,someone solve this..law
 

Read other answers
RELEVANCY SCORE 53.2

I am having difficulties with this.
1. Does Win 7 limit the quantity of past restore points it shows upon user request?
2. If stored elsewhere where do I find them?
3. Is there a way to set it up to show at least the last 10 restore pointsd created, or is there a smaller limit.
Right now the one and only restore point that is available is the last one. So it is like a revolving door every time a new restore point gets created, the previous one gets dropped and does not show any longer.

Given my limited competence with computer knowledge please post answers in layman terms as in Step 1.. 2 3. type.

I would appreciate help over this.

Thank you kindly

A:System Restore how to set to show every past restore point inc/manual

Hi
I believe that if you go to Backup and Restore (Start button, type Backup in the search bar at the bottom of the start menu), then click Restore button, on the screen that pops up is a blue link that says "Choose a different Date".. This will then allow you to select which backup you would like to recover your data from..

Is that what you are looking for. Apologies If I have mis-understood you.

Read other 7 answers
RELEVANCY SCORE 52.4

Good morning to all,

I was receiving the BSOD about 6 months ago at random times. After opting out of the Windows 10 Insiders Build program and successfully updating my operating system it went away until a few days ago. It is now happening more frequently then before. The only changes I have made are installing AVG Antivirus and running its "Fix Now -Tune up" feature. I attached a screenshot of its features (not all of which were performed: eg. didn't defrag solid state drive etc.) in addition to the debug report just in case it helps!

Thank you all!

Read other answers
RELEVANCY SCORE 52.4

It was kind of a curve ball, and a little unsettling, because I thought I had solved the problem. I think I've narrowed it down to my graphics card, since a lot of the recent BSODs point to it, but I'm not sure if it's because the drivers are bad, or if the card itself is bad (it's an Nvidia, and I thought that those cards are able to withstand gaming for several years, so I'm a little disheartened if it's a bad card).

Specs:
OS: Windows 7
x64
The original installed OS was Windows 7, I think (this is a used laptop)
My OS is a full retail version
Hardware around 4 years old
The OS was re-installed 6-8 months ago.

CPU: Intel Core i7 Q720 @ 1.6 GHz
Video card: Nvidia GeForce GTS 360M
Motherboard: I'm not sure, but I assume it's the original Asus version?
Power supply: Asus N193 85V
System Manufacturer: Asus
Model Number: G60JX
I'm hoping that this is maybe a driver problem, and not something serious like a defective card or maybe faulty RAM.

Thank you for reading this!

A:After a few months of no BSODs, it suddenly came back

Hello NocturnalSleep,

Various differemt bugchecks but they're all pointing to your GPU drivers of DirectX one way or another. I'd recommend uninstalling and reinstalling your nVidia video drivers and reinstalling the latest version. If you're already on the latest version, I'd recommend uninstalling and installing a previous version to the latest to be sure it's not a simple driver issue.

Driver(s) in need of update:


Quote:




ASMMAP64.sys - Sun Feb 04 14:52:56 2007 (LENOVO ATK Hotkey ATK0101 ACPI UTILITY). Update if available here.

vuhub.sys - Fri Nov 16 10:31:13 2007 (Eltima Software USB to Ethernet Connector Driver). Update if available here.




Regards,

Patrick

Read other 19 answers
RELEVANCY SCORE 52

Hello,

I have a Dell Inspiron N5010 laptop. About three months back my computer got a virus and I had to reinstall the operating system. Today it happened for the first time since then. Earlier I had a BSOD problem which I had gotten rid of by uninstalling Symantec. I am attaching the zip folder renamed as my user name. Kindly take a look and let me know if I can do something to avoid it in future.

Thanks,
Manish Kumar

A:First BSOD since I installed Windows7 three months back

Welcome to SevenForums.

The BSOD seems to be caused by your antivirus.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fc50017990, ffffffffc0000185, 107f28880, fffff8a002f32c8b}

*** WARNING: Unable to verify timestamp for EX64.SYS
*** ERROR: Module load completed but symbols could not be loaded for EX64.SYS
Probably caused by : EX64.SYS ( EX64+193ac3 )

Followup: MachineOwner
---------

Code:
fffff880`0b9b6b00 fffff880`02ce1d00Unable to load image \SystemRoot\System32\Drivers\SRTSP64.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SRTSP64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSP64.SYS
SRTSP64+0x3fd00
Norton tends to cause BSOD-s and several other issues. I would recommend uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials To Test.
Norton Removal Tool
Make scans with the following:

-Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET
In addition, run the maliciou... Read more

Read other 1 answers
RELEVANCY SCORE 52

Loooooong post, going to try and sum everything up to the best I can remember
A few months back I powered down my rig for a short time to test an adapter I had on one of my GPUs. It wasn't the adapter I thought it was, so I put it away and powered back on. Upon POST'ing, I was then greeted with the message "usb overload detected, the system will power down in 15 seconds". At first I thought it was my overclock, so I said no biggie and reset the CMOS.

Well, even after resetting the CMOS it did the same thing. I powered down and waited a few minutes, and tried powering up once more. This time when I booted up, unless I was going crazy, the socket that my power surge was plugged into across the room started making buzzing sounds. Out of fear, I powered my rig off. I thought I was going crazy because everything was fine, so I powered back up once more. This time however.... I was not so lucky. When I booted up, all the power on one side of my room went out, but the lights on the other side of the room (different socket) remained ON.

I was scared as hell and ran out of my room, haha! I had never seen anything like this before. I came back into my room a bit after and tried powering my rig on and other things that were attached to the power surge, but it was a no-go. I went and got a different extension cord out of the garage and replaced the one that was going from the wall socket to the power surge, and it ended up working. So something overloaded my previous ext... Read more

A:So I had a very weird issue a few months back, what do you guys think?

Both Blue Screens are related to your video card.

You might try clean installing the drivers for the card. (Completely remove the old drivers and install them again new).
Also be sure to re-seat the card in the slot. If there was a lot of dust then be sure to blow out the slot and be sure it is clean.

Have you replaced the surge protector strip? If not I would. You do not want to fry another board.

And what size cable is used for the extension cord? The info is sometimes printed on the cord. An AWG of 14 would work if the length is below 12 feet. But you should have an AWG12 if it is more.

Read other 2 answers
RELEVANCY SCORE 52

I updated to windows 10 about 3 months ago from windoes 7, but my computer has become incredibly slow. I want to revert back to Windows 7 and I have both the Windows 7 software with product code, but it doesn't work. System keeps saying product code invalid.I also have recovery discs but these are not being read by the computer.How can I go back to Windows 7 since it is longer than 30 days?I have spent the last 3 days, on all kinds of Forums, including Microsft but am going around in circles. I am not very Tech savvy, but I can understand step by step instructions.Please someone help!!!!!Thank you.    

Read other answers
RELEVANCY SCORE 52

Hi,
i had a few months without BDOS. But now they are back. I had some in January (about 4 the whole month). But today i had 4-5. I even had a pink one, which i have never seen before. I had one while booting and the last one was a few minutes ago. I recognized, that the Bluescreen was in bad resolution like only VGA mode or something. I need your help again
Its also mentionable that i cant udate my nvidea driver using the nvidea center. So i reinstalled the driver manually last month or so. But its up to date....
Another lue perhaps: Some Bluescreens didnt create a minidump...

I realy have no idea and would be very thankful if someone could help me. Thanks alot!!!!

A:My BSODs were fixed by you guys a few months ago - Now they are back

It seems Gigabyte doesn't provide support for your motherboard, but there are some drivers that need updating like the nvidia audio and Gigabyte GBB36x Controller drivers.

Please update Driver Reference Table - t_mouse.sys

Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {ffffe008722163e0, 2, 1, fffff8006794405b}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiCompleteFlipEntry+20b )
Followup: MachineOwner
---------
0: kd> lmvm nvlddmkmstart end module name
fffff800`67a80000 fffff800`6871c000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timesta... Read more

Read other 0 answers
RELEVANCY SCORE 51.2

Why, in system restore, are the months March, 2003 through November, 2003 missing?
 

A:Missing months in Quick Restore

Read other 16 answers
RELEVANCY SCORE 51.2

Hey...
I searched for an answer for that question all over the net and I didn't find any, and I even called microsoft customer service and they said it's impossible so I decided to bring my question to this forum.

Before Approximately 2 months I deleted the program "Windows live messenger" from my system (Vista home premium 32 bit).
I don't remember if I selected to save the history (the conversation with my contacts), But now I can't find it on my computer so I guess that if there was a history it was probably deleted too.

And to my question...
Is there any way I can restore those files? I don't have any "Saving point" of the system backup... and from what I've been told - after a month it's impossible to restore deleted files. Furthermore, I lately upgraded my OS with the service pack1 - could that become a problem?

What if the history wasn't saved on my hard drive at the first place (maybe I selected that there wouldn't be history) - Is there any way to check if there was a history in this case? Can it be saved somewhere in the system files? I'm helpless, please, if you have any idea how can I restore files that may have deleted long ago, give me a hand here.
It is very important to me!

Thank you.
 

A:Is there a way to restore deleted files after 2 months?

Read other 6 answers
RELEVANCY SCORE 50.8

Hi All,

I could successfully remove SYSTEM FIX virus with the useful guide but unhide.exe did not work for me and I still have many files hidden in many folders.

Could you please anyone out here help??

Please.

Ash

A:Files are still hidden after removing SYSTEM FIX virus 3 months back!!

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/465361 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

Read other 2 answers
RELEVANCY SCORE 50.4

My laptop is 6 months old... Theres a white area created around the back panel on the vents... but everything works fine... even dell online test shows success for full test... do i have to worry about that burnt like area on back panel?

Read other answers
RELEVANCY SCORE 50.4

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 1
RAM: 2047 Mb
Graphics Card: Standard VGA Graphics Adapter, 3 Mb
Hard Drives: C: Total - 131061 MB, Free - 98462 MB; F: Total - 238472 MB, Free - 36009 MB;
Motherboard: Dell Computer Corp., 02Y832
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:sys restore malfunction wiped out 2 months of email

Read other 9 answers
RELEVANCY SCORE 48.8

I am using Acronis True Image Home 2010 as my back-up program and have a full back-up and (as of now) one incremental back-up on a portable hard-drive. My question is: should I need to restore my computer's system, how should I do it? That is, restore the full back-up and then the incremental back-up? (I see the size of the incremental back-up is less than 1/2 the size of the full back-up.) Thanks for any and all suggestions.
 

A:Solved: How to Restore System: Full Back-Up or Incremental Back-up?

Read other 16 answers
RELEVANCY SCORE 48

I try to power up my laptop and it pops up the HP logo, sits there for a few seconds, then goes black and pops the HP logo back up. This is a continuous loop. I've tried a hard reset, no use. Please help.

Read other answers