Over 1 million tech questions and answers.

PhotoShop 5.0 stopped working with XP

Q: PhotoShop 5.0 stopped working with XP

I have a Pentium 4 3Ghz with 1 MB ram running XP SP2.

I had loaded Adobe Photoshop 5.0 from an original CD a few months ago. It used to
work well. As of a few week's ago, it does not work. It shows a message "Unable
to load PSUT9532.dll Photoshp will not be able to support 16bit plu-ins. Continue
launching Y/N? If I tried to continue, it puts up a blank window and frees. The
strange thing is psut9532.dll exists in the program files/ adobe photoshop directory.

I uninstalled the program. When I used the CD now to re-install, it does not work.
The set-up.exe does not run at all.

The issue is repeatable on two computers I have that run XP. One other computer
I have with Windows ME, adobe photoshop 5.0 runs fine and the set-up CD loads fine
also.

My theory is that there was an recent update to XP lately that caused this incompatibility?
Out of ideas and confused! I would like to photo editing back without spending a
lot for an upgrade.

RELEVANCY SCORE 200
Preferred Solution: PhotoShop 5.0 stopped working with XP

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: PhotoShop 5.0 stopped working with XP

I would download a good copy of the DLL and replace all instances of it on your computer after a full search. Keep the old ones in the recycle bin so you at least can trace where they came from and restore them if other programs have problems. There are many sites like this: http://www.dlldump.com/download-dll-files_new.php/dllfiles/P/Psut9532.dll/3.0.42/download.html

Windows has a sharing system for utility files like DLLs. It should be a simple matter of the first program that installs a particular file being the only repository and other programs share that one. It never seems to work exactly as I anticipate. Photoshop may or may not be using the one in the folder. And that DLL might or might not have been removed and reloaded when you uninstalled and reinstalled the program. Another approach is to uninstall, remove the Photoshop folder and then reinstall. That will probably put a good version of the DLL on the computer.

It would also seem that a DLL starting with ps would be used only for Photoshop. That is probably true but you can’t count on that either. Search didn’t’ find it on my C drive at all, so CS must be using a different method of running 16 bit.

Read other 1 answers
RELEVANCY SCORE 66

HI,

I have Photoshop Cs5 x32 and x64 installed, but x64 has stopped working, while x32 runs fine.

I actually only use x64, so I have a problem - can you please help.

I have many "actions" and "presets" installed, so re-installing the program would be a last resort.This is the message I get:

Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.4.0
Application Timestamp: 4d9d8f8e
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception Code: c0000005
Exception Offset: 000000000003bd26
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: a0f7
Additional Information 2: a0f784984722f85de1e83e06bb86af34
Additional Information 3: c173
Additional Information 4: c17379d202b811c3d79b6b4c34274995

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hope you can help.

Many thanks & regards

Read other answers
RELEVANCY SCORE 66

Hi,
please help i have photoshop cs3 extended, pse elements 7 and photoshop cs5 extended which is part of the adobe master collection, all were working fine untill i did a windows update. now when i launch the above programs as they hit initialization sequence
on opening dialogue i get a windows message which just shuts it down saying there is a problem but no clue as to what it is. i am stuck???
regards dave of suedav art

Read other answers
RELEVANCY SCORE 66

So I finally get my new computer in, which is running on my new 64-bit Vista. I install my favorite program, Photoshop CS3, and decide to try it out a bit. It works just fine. Then I decide to install my tablet which comes included with all my photoshop plug-ins.

This is where everything gets awesome. As I'm starting back up Photoshop I get hit with this.

If you notice, it freezes right as the plug-ins are being put in. I found out that the life-ruining box invading my startup is called DEP. So I tried to disable it going through the command prompt. Everything happened the way it was supposed to happen. I got some sort of success message, and when I checked the DEP status it said that it was disabled. So I try to start up photoshop again. Still, it pops up. I restart my computer after disabling it again. Still, it pops up. If I'm about to hear that I can't use Photoshop with plug-ins because of this 64-bit crap, I'll send my computer back right now.

Is there anything I can possibly do to get this to work?

A:Photoshop CS3 has stopped working

If you notice, it freezes right as the plug-ins are being put in. I found out that the life-ruining box invading my startup is called DEP. So I tried to disable it going through the command prompt. Everything happened the way it was supposed to happen. I got some sort of success message, and when I checked the DEP status it said that it was disabled. So I try to start up photoshop again. Still, it pops up. I restart my computer after disabling it again. Still, it pops up. If I'm about to hear that I can't use Photoshop with plug-ins because of this 64-bit crap, I'll send my computer back right now.




Hello CouldBeJesus,

Welcome to the forums.

You can disable DEP for a particular program by going to the start menu/control panel (classic view). Click on 'advanced system settings'. Under 'Performance' click settings. 'Data Execution Prevention' tab. There is a warning in the help files that this 'could' allow a virus to enter the computer through the program. It also suggests looking for an update to your program before disabling. Hope it works.

Gary

Read other 7 answers
RELEVANCY SCORE 66

I get this error message every time i try and open it, Re-installing it doesn't seem to work and i have no idea what todo next.. My drivers are up to date so microsoft say when i searched for an update..

Any help would be appreciated.

Thanks.
 

A:' Photoshop CS6 Has stopped working '

To help us help you,please use the TSG System Info tool to let Tech's know the specs of your computer: http://static.techguy.org/download/SysInfo.exe Copy and paste the results here in your thread. You can use the TSG Info to fill in your computer information in your user profile as well.

Also, if its a brand name system like an Acer,Dell or HP, please post the exact model of the system.
 

Read other 1 answers
RELEVANCY SCORE 66

Hello,
Recently while I am working with Photoshop (CS4 64-bit) the window appears saying "Photoshop has stopped working". Once the program crashes I can't re-open it because the same "stopped working" windows appears on start-up. I haven't been using any other software but the same problem twice appeared with MS Word.
I bought computer 2 weeks ago so I don't want to re-install Windows after such short time.

This problem seems to appear after I installed Wacom Intuos 4 tablet. I tried to uninstall Wacom drivers and install older ones but it didn't seem to have effect or I didn't uninstall all Wacom drivers. I is hard to say coz Device manager often doesn't show all Wacom drivers installed.

Do you have any suggestions to this problem?

A:Photoshop CS4 stopped working

If this problem is happening with Word and now CS4 that's an indication with an impending problem with the system. If the system is still under warranty you might have the service department look it over.

By the way what version of Word are you using?

Also can you provide us some system specs?

Thanks.

Read other 9 answers
RELEVANCY SCORE 65.2

I know this must have been posted here somewhere i just can't find it. i've been online all morning trying to find a solution to this issue. this is the only program i'm having this issue with. its a new computer i got in dec and i have anti virus software and i've done numerous scans. the adobe site doesn't help at all.

has anyone else had this issue and how did you solve it?

thx!!

A:adobe photoshop cs4 has stopped working

Have you tried uninstalling it then reinstalling it...

Read other 5 answers
RELEVANCY SCORE 65.2

Hi,
Today I deleted Norton antivirus and installed the comcast free version of McAfee anti virus. Hours later when I needed to use Elements it would start but then just sit there forever and never fully load. This happened time and again even after rebooting. Finally I uninstalled Elements and tried to reinstall it. But when I click on the install button it just sits there. I have disabled Mcafee and still no luck. I've rebooted a number of times and still no luck. I'm running XP Home with all the latest updates and a gig of memory. Any help would be GREATLY appreciated.
 

A:Photoshop Elements stopped working

Which version(s) of Norton ??
Which version of Elements ??
Did you use the "tool" to remove all of Norton ???

Does this fit your version of Norton ?? ...
http://service1.symantec.com/SUPPOR...ew=docid&dtype=&prod=&ver=&osv=&osv_lvl=&seg=
 

Read other 1 answers
RELEVANCY SCORE 65.2

i started getting this message every time i close photoshop. any one know a fix for it
 

A:adobe photoshop cs4 has stopped working

Read other 6 answers
RELEVANCY SCORE 65.2

I installed Photoshop 7.0 about 6 months ago with Windows 7, 64-bit operating system. It successfully installed and I have been using it with no issues. Over this weekend, it just stopped working and I get the following error:

"Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable."

I have uninstalled Photoshop and tried to reinstall it but still have the same issue.

A:Photoshop 7.0 stopped working with Windows 7, 64-bit

mreese,

1.Have you tried using one of your System Restore points PRIOR to your current problem occurring?

System Restore

2.Have you checked in Event Viewer?

To check for problems you need to do the following.

Event viewer.





Quote:
Type eventvwr in search and go to the windows log>application tab.
Look for errors that have red in the left hand column that say anything relating to the CURRENT problem.
When you find any make a screenshot and upload them to us.


http://windows.microsoft.com/en-US/w...s-Event-Viewer
3. Google is your friend.
Done a search???

Read other 3 answers
RELEVANCY SCORE 64.4

Hello everyone, and thanks in advance.

Using Photoshop 7.01 for Windows, I cannot do now what I have done hundreds of times before: add Type to an image.

Old images with type can be edited with no problem. But with all new files created, the type does not appear on the image. (I have been in the RGB mode).

The only possible cause of the problem (that I can think of) is that I have been using InDesign recently, and perhaps (in InDesign) I have changed the color mode in repsonse to a dialogue box.

I'm perplexed and anxious-- I need my Type Tool to work!.

Suggestions deeply appreciated.

--RB
 

A:Photoshop 7 -- Type Tool Stopped Working

Iíve never had InDesign mess with my PS settings.

In the toolbar are the little boxes arranged with the black box upper left and the white box lower right? Or is the type color you have selected in the upper left box. If the white is in the upper left you print white. The two tiny boxes below and to the left will switch it back if you just want black and white. The double arrows above and to the right will swap the background and foreground.

I hope it is as simple as that.
 

Read other 2 answers
RELEVANCY SCORE 63.6

Hey all, thanks ahead of time for taking a look!

I've had this problem with Adobe Photoshop Extended (CS4 Version 11.0) and Microsoft Paint for about a month now. Anytime I try to "save" or "save as" with either of these programs, Vista produces the "[Photoshop or Paint] has stopped working - Windows is checking for a solution" error. It then, after maybe 15 seconds or so, says "[Photoshop or Paint] has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

This happens when I try to save ANYTHING on either of these programs, but it is restricted to only these two programs. Everything else, including all Microsoft Office software and even irfanview, which is another image editing software, work flawlessly. I do not believe that I downloaded any software prior to this problem. I've searched all over the internet for a solution but I can only find people having trouble saving as JPGs, but I cannot save at all with these programs, normally I can find someone who has solved the same problem and I follow their steps but this has absolutely stumped me. Any help would be GREATLY appreciated!!!!!!

I know that some of these have no correlation to the actual issue, but I figured it's worth a shot. Here's all that I've tried to fix it -
-Reinstalled Photoshop
-Complete System Virus Scan via ESET NOD32 4.0.437.0
-Complete System Virus Scan via ... Read more

A:[SOLVED] Cannot Save in Photoshop or Paint (Has Stopped Working)

You have Avast & ESET both installed?

Remove Avast using Removal Tool --> http://files.avast.com/files/eng/aswclear.exe

Re-boot upon completion.

Update ESET NOD32 installation to v4.2.40.0 --> http://www.eset.com/download

Re-boot.

Test Photoshop, Paint, Word, others again.

Regards. . .

jcgriff2

.

Read other 3 answers
RELEVANCY SCORE 63.6

Heya,

I have Photoshop CS.
The 'Type tool' in Photoshop has stopped working & Windows Paint wont load up at all. Brings up the error screen 'Paint has encountered a problem & needs to close'
Ive uninstalled Photosop twice still with no joy. And I cant find Paint in the Windows component menu to unintsall it.
If anyone has any advice this would be great
cheers
 

A:Windows apin & features of Photoshop stopped working...

Opps sorry that was meant to say 'Windows 'Paint' & features of photoshop stopped working'
excuse my bad typing
 

Read other 1 answers
RELEVANCY SCORE 55.6

Hi, I recently upgraded my PC from Vista to Windows 7.

The update took a while, but so far it has been well worth it. Photoshop worked just fine on Vista when I used it, and so far it has worked perfectly fine on 7. On the other hand, I am stuck in a spot where I keep crashing it and have not found a work around. Now I am wondering if this is related to Windows 7 or something just specific to Photoshop(I have never got it to crash before).

I am a student taking a Photoshop class, so this isn't some hardcore project or anything. I am following a lesson straight out of Adobe's Photoshop CS4 Classroom in a book, book....

Specifically the lesson 9, where we take a smart object, rasterize it, then apply it to a vanishing point filter. It is on this step where I drag a flat image and Photoshop converts it to appear like it belongs on a box, that Photoshop freezes, and windows makes it close down with no other option.

I know I put some technical stuff about photoshop here and this is a windows forum. I just thought maybe someone here would be knowledgeable on both subjects.

If anyone has some suggestions on ways to fix this please let me know. I know I could just stop doing it, but maybe there are other people who reproduce this error or something.

Thanks, Nick

A:Photoshop CS4 - "has stopped working"

Hello Nick, and welcome to the forums.

I'm not liking the sounds of the upgrade, possibly remnants of Vista having an effect on your system, but can not be definite on that.

Have you tried reinstalling Photoshop?

Read other 1 answers
RELEVANCY SCORE 52.8

Hello All. I'm new to the site, and after having been tasked to fix my girlfriends computer. I'm left scratching my head. I don't know what she or her son did to this machine but everything I have tried has not worked. So any help would be greatly appreciated.

Machine - Dell Inspriron INSP1440

OS - Vista 32-bit SP2

Issues -

Cannot start internet browsers outside of safe mode. Every time I have tried I get an APPCRASH Error.

IE - Internet Explorer has stopped working.

Problem Signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Application Timestamp: 4d76255d
Fault Module Name: iexplore.exe
Fault Module Version: 9.0.8112.16421
Fault Module Timestamp: 4d76255d
Exception Code: c0000096
Exception Offset: 000026d1
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160


Firefox - Firefox has Stopped Working

Problem Signature:
Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 13.0.1.4548
Application Timestamp: 4fda6075
Fault Module Name: ... Read more

A:APPCRASH When starting IE and Firefox, DNS Client Has Stopped Working, and Host Process (Rundll32) has stopped working Errors.

Here is the DNS client has stopped working error

DNS Client has stopped working

Problem Signature:
Problem Event Name: APPCRASH
Application Name: svchost.exe_Dnscache
Application Version: 6.0.6001.18000
Application Timestamp: 47918b89
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Fault Module Timestamp: 4cb73436
Exception Code: c0000005
Exception Offset: 000250fb
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional Information 1: 7373
Additional Information 2: 38d9ec761cde35dc7ff9a3014cbc1e9a
Additional Information 3: 007a
Additional Information 4: f2126b35ab5de9a1c961e83e18b5e24b

Read other 21 answers
RELEVANCY SCORE 49.6

HI,
I'VE INSTTALED WINDOWS 7 PROF.ON MY PC. I M TRYING TO INSTALL WINDOWS7ULTIMATE BY CLICKING ON SETUP.EXE AN ERROR MASSAGE APPEARED SAYING: [WINDOWS INSTALLER HAS STOPPED WORKING] THEN I TRIED TO INSTALL WINDOWS 8 ON MY PC.. BUT THE ERROR MASSAGE APPEARED SAYING SAME THING [WINDOWS INSTALLER HAS STOPPED WORKING] AND ALL OTHER SETUP IN THAT DRIVE ARE SAYING SAME THING.....DON'T KNOW WTTD.....HHHHHHHHHHHHHEEEEEEEEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPP!
I'M IN BIG TROUBLE NOTHING IS GOING TO INSTALL

ERROR
Problem signature:
Problem Event Name: APPCRASH
Application Name: setup.exe_Microsoft? Windows? Operating System
Application Version: 6.2.9200.16384
Application Timestamp: 5010a298
Fault Module Name: setup.exe
Fault Module Version: 6.2.9200.16384
Fault Module Timestamp: 5010a298
Exception Code: c0000096
Exception Offset: 000020f4
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
E:\Windows\system32\en-US\erofflps.txt

A:Windows installer has stopped working or setup.exe has stopped working

Hi,

Lets start here:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click 'Copy' - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the validation tool here in your next reply

Regards,
Golden

Read other 7 answers
RELEVANCY SCORE 49.6

this morning i got those 2 errors pop up, and i cannot get into system info, cannot do a system restore
running windows 7
 

Read other answers
RELEVANCY SCORE 49.2

Im running Photoshop 5.5 on windows xp & downloaded a pluggin so i can open DDS files & edit them. Pluggin installs & I start doing just that, DDS file saves correctly & i can now play Mount & Blade with my own meshes & their new textures, Life is good, but its getting late so i shutdown & go to bed. Next morning i startup computer but now Photoshop cannot open DDS files? I just get a box pop up saying i need Photoshop 3.0 or higher thats compatable with this plugin, but i have5.5 & it worked last night? (Though sometimes theres no box & it just has to end program) Once thats closed down i get a error message saying:
DDE Server Windowhotoshop.exe - Application Error The instruction at "0x7c9113c0"referenced memory at "0x00000000". The memory could not be "written".

Anyone out there that can offer some insite into whats happened to my photoshop?
 

A:Photoshop 5.5 has stopped opening DDS files?

The clue might be the warning you got from the plug-in after reboot. It expects to see photoshop 3.0. That could imply it is written for version 3 and is actually too old to work properly with the version 5.5 you have. Your best bet is possibly to forget it, uninstall it and find an alternative that is more recent. If it won't uninstall and leave you with a working Photoshop, you will have to reinstall photoshop.

A second clue is the error referring to DDE server. This is a communications technology not supplied by either Photoshop or the plug-in - it is microsoft product and it may be you have a corrupted version, or the add-on has installed .DLL's which have incorrectly overwritten a later version in XP. I can't offer advice on how to update or repair DDE, sorry, but maybe a reinstall of photoshop might do it.
 

Read other 2 answers
RELEVANCY SCORE 48

OK, I am not sure if this is the correct forum, but a search of this forum, the Business Applications forum and the Multimedia forum yielded no results.

I am working on a Dell Inspiron N5010 64 bit Windows 7 Home Premium SP 1 with Intel i5 2.67 GHz processor, 6 GB RAM.

Both Adobe Premiere Elements 9 and Photoshop Elements 9 are installed and were working (for years) up until recently. Both suddenly developed a problem with the Organizer.

If I double click on the desktop icon to open Premiere, and then click on the Organize button, I see this message:

"Elements 9 Organizer has stopped working."

If I then click on "View problem details" I see this information:

Problem Event Name: APPCRASH
Application Name: PhotoshopElementsOrganizer.exe
Application Version: 9.0.3.0
Application Timestamp: 4d90791c
Fault Module Name: mc_demux_mp2_ds.ax
Fault Module Version: 8.5.0.27572
Fault Module Timestamp: 4c6e25d8
Exception Code: c0000005
Exception Offset: 000ef2da
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

I then click on the "Close the program" button.

However, If I double click on the desktop icon to open Premiere, and then click on the "Open Project" button and then click on a project, the project ope... Read more

Read other answers
RELEVANCY SCORE 47.6

I get these two error messages every time I start my computer, is there any help? I have an Acer 4810T
 

Read other answers
RELEVANCY SCORE 46.4

Hey, Fellas, I'm back.
Lately when I've tried looking at different folders and files on my hard drives I keep getting "Windows Explorer has stopped working and will restart." It's driving me nuts, I can barely do anything.
Also, same thing with Internet Explorer...I'm getting real sick of Vista's shoddiness..

A:Windows Explorer Stopped Working, Internet Explorer Stopped Working, what DOES work?

Hi,
Have a look at the events log and make a virus scan too.

Read other 18 answers
RELEVANCY SCORE 46

My son's Ideapad 110S (purhased Aug 2017) has stopped working, won't charge, but charger does work on his brothers Ideapad 110S. It is completely dead. Does battery need replacing or something else? Thank you for any and all help!

Read other answers
RELEVANCY SCORE 46

When I go to open HP MediaSmart, on the drop down menu I click on Video. It opens briefly and about 5 seconds I get the message "HP Media Video has stopped working. A problem stopped the prgram to stop working correctly. Windows will notify me if a solution is available.  I ran the sfc.exe (system file checker tool from microsoft as administrator)  and it passed with result of "windows resource protection did not find any integrity violations".I can play a DVD, i can open my photos but I can't view my videos or load any new ones using HP MediaSmart.I have restarted the computer several times with no help.Any suggestions?

Read other answers
RELEVANCY SCORE 44

Hi,

My brother recently installed CS4 on my computer, a HP Pavillion HDX, but I have a problem whenever I open photoshop on it. The photos look tiled and have lines all over them.

Here's a screenshot

http://img195.imageshack.us/img195/2415/examplea.jpg

I'm not too sure what sub forum this goes on, so I am putting it on this one as I am running Vista service pack 2.

A:Photoshop CS4 isn't working

Are you able to view the pictures with Windows Photo Gallery. If so ,this would rule out any problem with the .jpg file.

The only other thing would be a botched install. You could try to uninstall then reinstall. To uninstall go to <control panel/programs/uninstall program/Adobe Photoshop CS4>. You simply click on the setup.exe file in the zip folder to reinstall.

If all else fails, here is an Adobe Photoshop forum: http://forums.adobe.com/index.jspa

Read other 7 answers
RELEVANCY SCORE 43.6

Windows forced an upgrade to 10 this afternoon and suddenly I'm unable to use Photoshop 5.5. (Yes, I know it's an old program but it had no issues in Windows 8.1) The program will simply not open.

I can't afford a new version of PS, the one I have fits my needs, and I'm bordering on furious that it's not working due to this upgrade I did not want.

Is there any way to get to the program to work in 10? If not, I want to know how I can roll back to my previous version of Windows since I am incredibly unhappy with the OS so far.
 

Read other answers
RELEVANCY SCORE 43.6

I have Window XP and, facing a problem of not working of Adobe Photoshop.. After Installation of Adobe Photoshop, then its not working in the sense its not open on the screen after reading the fonts.. but in the same case adobe imageready is working on the board..

Request to please try to tackle my problem.. what should be i do .....

Thanks and Regards

A:adobe photoshop not working

Moved from Other Operating Systems.

Read other 1 answers
RELEVANCY SCORE 43.2

Hello! I have been using photoshop for years so I am very familiar with the program, but just the other day I was trying to connect a paint contact point to another area of the screen by holding the shift key (I'm sure you know this trick) and it didn't work! It used to, but now it doesn't. I looked all through the preferences but couldn't find anything. Please help!
 

A:Photoshop: 'Shift + Click' not working

Read other 7 answers
RELEVANCY SCORE 43.2

I own a legitimate copy of the above and now have the following problem.
I load the program and get to the screen where you can choose Organiser or Editor. Organiser works fine but when I try to open the editor, after getting the little bar showing 'Building Contents and Effects', I get a message stating 'Photoshop Elements 13 Editor has stopped Working' A problem caused the program to stop working. Windows will close the program and notify you if a solution is available'
I have tried uninstalling and reinstalling to no avail.
Checking on the web it appears many people have had this problem with various Elements versions but no-one seems to have come up with a solution.
Can anyone help please.
I am running Win 10 Home.
 

A:Photoshop Elements 13, Editor Not Working

Read other 6 answers
RELEVANCY SCORE 43.2

MY FIRST POST

Hi,

Im ben jacobs, im a graphic designer i just finished a heavy project that took 9 hours (give or take some time). and i did not save the project yet. i know, i know i should of been saving numerous times while working on it. I dont want to close the program i just want to get it to run again ASAP!!! for atleast a few minutes to save so i can restart the computer after. it is not responding at all and its been going on for about an hour now..

My OS is Windows XP: HOME

i need guidance BAD!!!!!
help me... help me please, help me lol

thankx in advance!!!!!!!!!!!!!!!!!!!!!!
 

A:A Way To Make Photoshop Continue Working......

I'm afraid it sounds like you're up the creek without a paddle.
You have now learned the hard way, Save your work constantly when working on it, more so when it's a large project.
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hello sir i am Using Hp notebook with AMD Radeon R5 series . my problem is that when i am using Adobe Photoshop cc its works only for 15min then it Stoped working. please help Me i am Graphic Designer thats why my all Graphical work Done on Photoshop So please Help Me ..

Read other answers
RELEVANCY SCORE 42.8

Hey,
I was wondering if anyone could help me?  I have been having a lot of issues with my computer and using the internet. I keep getting messages such as ‘windows explorer has stopped working ‘and ‘Host process for windows services stopped working’. I haven’t been able to stream videos (with the exception of youtube),  download certain programs and browsing sites is slow.  I remember my computer being fine until a window update but I don’t know if that’s a coincidence or not.  I have tired uninstalling windows explorer and system restore to no avail.
I would really appreciate any help or advice.
Here is a report for one of the error messages I received.
Description:
  A problem caused this program to stop interacting with Windows.
 
Problem signature:
  Problem Event Name:                           AppHangXProcB1
  Application Name:                                iexplore.exe
  Application Version:                             10.0.9200.16686
  Application Timestamp:&... Read more

A:Windows explorer has stopped working / Host process for windows services stopped

Do things get better if you boot into Safe Mode with Networking?

Read other 1 answers
RELEVANCY SCORE 42.8

Hello:
The mouse started to stray and stopped working in the middle of doing something, i.e. eBay, typing word and etc. which is very annoying and first of all, I lose all of the work done due to stopping of the mouse.

However, the mouse started working as if nothing wrong, once I restarted by 'force' restart ..... pushing the button in the middle of the PC. Otherwise, the PC is all fine and working OK.

I did apply Malwarebytes to combat the issue, however the issue does not resolve.

Any help on this would be truoly appreciated.

Thanks,

A:Mouse stopped working in the middle of working, i.e. eBay, typing word, etc.

Did you try a different mouse? If you still have the same problem with a new mouse, see if there are any drivers for the mouse from it's manufacturers web site.
Also try a Clean Boot, if that works, then add one startup item at a time till the mouse acts weird again, then you know that is the problematic program.

Read other 1 answers
RELEVANCY SCORE 42.8

I have had a rather large problem over the last couple of days. It started earlier in the week, when one drive stopped working. Not a big problem, I've had drives fail before. 4 disks, so i can handle one less for a little while, i though. Not so though, while still waiting for my new drive, using my computer like usual (with less load on unit D) i suddenly start getting write-errors to D:, and the Intel Matrix Storage Console lists it as Stopped Working instead of Degraded. Nothing changed except for the status of the Volume, all the disks read the same as before, fully functional.

I have very little experience with these sort of matters. This is the first time I've lost a drive where i might lose data as well, and i have pretty much no idea where to go from here. I've tried to replace the faulty disk with another 500GB drive, but the RAID-setup in BIOS just tells me there isn't enough space, and the Console in Windows places the new drive as a Non-RAID drive. I can mark it as reserve, but that seems to be all i can do with it.

I'm not, hopefully, asking for miracles. I have just two things that i really need to retrieve from the Volume, my Firefox sessions (saved in a separate folder at the root of the drive), and my Thunderbird mail, (stored in their standard location, as my whole Windows-profile is on that drive). Everything else i can get again. (Well, not really, i have stuff stored up from 8-10 years back, from people who has withdrawn from t... Read more

A:RAID 5 - Disks are working, but the Volume listed as Stopped Working

Read other 9 answers
RELEVANCY SCORE 42.8

So one day I was using a laptop wirelessly when the internet just suddenly turned off. I checked my modem and it was working fine but when I checked my router, the lights were on but not blinking. it was just a steady light. when I checked for a wireless network the name of the network I usually use didnt show up.

I tried unplugging everything and plugging everything back in again and I tried pressing the reset button on the back of the router. Can anyone help?

Thanks so much

P.S. my router is a linksys WRT300N Wireless-N Broadband router
 

A:Wireless router suddenly stopped working (Lights still working though)

what devices do you have connected the router anything else wireless
make and model of the pc

does the PC work if you connect to the router by a cable ?
if not
try connecting directly to the modem and see if that works OK

we need to see some details, which will mean you need to copy to a working PC
------------------------------------------------------------------------
{run Xirrus Wi-Fi Inspector} Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.com/library/wifitools.php
Direct link to the program is here http://www.xirrus.com/library/wifi_download_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
----------------------------------------------------------------------... Read more

Read other 2 answers
RELEVANCY SCORE 42.4

Hi,
I hope this is not a silly question. I'm using Adobe Photoshop Elements 2.0 It came with a scanner and the software is fine for what I want. I was doing some extensive repairs of some old negs with the clone stamp, then it suddenly stopped working. There were no error messages; it just stopped copying. I can't find anything about this, and any comments an suggestions would welcome.
Stephen.
 

A:Clone tool not working in Photoshop Elements

Try uninstalling and reinstalling elements
 

Read other 3 answers
RELEVANCY SCORE 42.4

Okay, I don't know how this happened. One second it's working fine, the next, I get this error. I go to preview my image in the browser, so I click "Save for Web." The "Save for Web" screen comes up, along with all the options for things that I can adjust. Then I go to click the Internet Explorer "e" button to get the actual preview, and I get this error message that says: "The operation could not be completed because a file by that name already exists."

I have no idea what that has to do with me previewing a file. I've always been able to preview images in the browser, but now it's giving me this error. I tried re-installing PS7, but it doesn't change the problem. I've also refreshed my PS7 prefs file. I honestly have no idea why this is happening, as I said it was working just fine one second, then the next, this happened. If anyone has ever experienced this problem, or knows how to correct it, please let me know!

Thanks,
Bob
 

Read other answers
RELEVANCY SCORE 42.4

I installed Photoshop CS5 last week and began my tutorials on Adobe to learn how to access all the 'What's New' featues in Photoshop CS5. It didn't take long to realize these functions were not available to me. The short-cuts don't work or the options are grayed out.
I have contacted NVIDIA, Adobe, and NAPP Help Desk (as I am a member of NAPP) with no results in solving my problem.

The video card I have is on the approved list with Adobe and everyone at Adobe and NAPP says it should work and access all features in Photoshop. NVIDIA SAYS I NEED A QUADRO FX 1800 video cared. NAPP people say "NO". I don't need that expensive a card.

SO, To the best of my ablity, here is the information you may need to assist/help me. I sure hope someone out there can help.

I may need to upgrade my current video card, NVIDIA GeForce 8500 GT (with latest updated drivers) to MAXAMIZE all functions of Photoshop CS5 without overkill.

My OS is:
Windows XP Home Edition SP3 32 bit
Intel (R) Core (TM)2 Duo CPU
E6850 @ 3.00GHz
3.00 GHz
4GG RAM

I believe the video card I have is not allowing me to access any of the new features in Photoshop. (With or without OpenGL feature checked or unchecked) They are either grayed out or the short cuts donít work. I need you to advise me if this line of thinking is correct. The tools I have tried and canít access are:
Rotate View tool,
Sampling Ring,
HUE Color Picker,
Drag and Drop from Mini Bridge.
3D View of the New Br... Read more

A:Solved: All OpenGL Features in Photoshop CS5 not working

I completely uninstalled my drivers and re-installed them This fixed the problem.........
 

Read other 1 answers
RELEVANCY SCORE 42.4

Hi my Uncle got me Photoshop CS8 for me for my birthday ...Unfortuneatly some things arent working....

In the filter toolbar at the top many options are disabled, take a look at this picture and post if you can help me...thanks

http://img79.echo.cx/img79/2537/screenshot8vf1.jpg
 

A:Photoshop CS 8 for some reason certain options arent working

Read other 12 answers
RELEVANCY SCORE 42.4

Hi guys, i have a strange problem, i am running Vista home basic 64 bit, and all of a sudden certain programs will not open,Itunes,Photoshop,and windows sidebar....

this is error message..... Adobe photoshop CS6 has stopped working a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

all of these programs used to work fine...

i can surf the net use Nero..etc..etc..

i have tried to reinstall and it makes no difference..

i really have no idea where to start and i dont really want to have to do a total reinstall...

anybody any ideas..??

thanks
toby

A:Itunes,Photoshop,Windows Sidebar not working

From your description of which programs won't open, you didn't include Adobe. However, you're getting an Adobe error message. Or, are you saying this happens when you try to launch Adobe?

You said you tried to reinstall. What did you try to reinstall?

Read other 3 answers
RELEVANCY SCORE 42.4

I have a dell laptop inspiron  3558 with intel core i5 with win 10 ...this morning all of a sudden its internal speakers stopped working after i  unplugged my headphones ..I have used headphones before multiple times with no problems ...in audio settings it shows the speakers are enabled and the sound bar is moving but theres no sound ..I plug the headphones back or external speakers  ,those are  working ..troubleshoot is telling me the inbuilt speakers are working fine and cannot detect any problem ..I tried reinstalling the audio driver ,then restarting , then updating with the new Microsoft hd audio driver ,stopped all enhacements restarting again ,still not working ...is this a mechanical problem or a software problem ? I barely had this laptop for 4 months ...will reinstalling windows solve the problem or what should I do ? is the sensor not working ?

Read other answers
RELEVANCY SCORE 42.4

Hi! I am repeatedly getting the error "Internet Explorer not working" / Windows checking for solution/Last browsing closed unexpectedly , then Restore Session. I went to google to find a fix for this error .I'm being told to Press Window + W key then type in Troubleshooting in the Search box , then enter View All ,then Click IE Performance, then click Advanced etc..... The problem is that when I get to the Search box I start to type in the Troubleshooting and after one keystroke of the T, the computer automatically goes back to my desktop home page. The search engine box will not let me fix this problem. Can somebody help me ? Thanks so much! I have IE 10 and recently upgraded to the windows 8.1 from the Windows 8 about 3 weeks ago.

A:IE 10 stopped Working error / Search engine not working

Are you sure you have Windows 8.1? If you were you would have IE 11
From the Charms bar search System and verify if indeed you have Windows 8.1

Read other 6 answers
RELEVANCY SCORE 42.4

Okay, this is the weirdest problem I've ever hard with computers. Here's what happened:

1. I had a few years old Pentium D 2,8GHz processor running on Asus P5VDC-X mobo. PQI 566MHz DDR2 and GF 7600GS 256mb PCI-E, 350W power.
2. I updated the mobo to Asus P5L-MX to support faster PCI-E cards. Everything worked fine, despite the processor ran too hot (58C on high use)
3. Because of the overheating I replaced the thermal paste but it had no effect on the temperature.
4. I thought I used too much paste so I replaced the paste again.
---
5. Bang, no video when I turn on the computer. I tried taking off everything part by part but nothing worked. It didn't work even when I only had processor and used the integrated graphics port. Tried resetting the bios too.
6. Nothing worked so I put back the old P5VDC-X and it worked like charm.
7. I thought it was logical that the problem was caused because of the mobo so I bought a new one, Asrock G31M-S.
8. No video... Did the same steps to this one too. It also had integrated gfx but it didn't work either.
9. The old P5VDC-X still works.

So I have no idea what's causing the problem. Is it the CPU? Mobo? PSU? RAM? I have no speaker on my case so I can't hear any beeps, but it won't start loading the OS from the hardrive and my USB mouse won't turn on. Tried using a differen't monitor too.

The main point is why it stopped working suddenly on new mobo's but still works with the old P5VDC-X? A... Read more

A:New mobos suddenly stopped working, old mobo working

Two new motherboards tells us you made the same simple install error in both of them.
Tell us more about power supply, memory, cable.
Did you make sure the memory was correct for both new boards, and what is the memory on the old board. Would also like to know the power supply and other hard ware.
What happens with the most basic, simple install. Does everything light up?

If you used the same hard drive with the same Windows install on the two motherboards, that is the problem. Windows has detected that you have changed the motherboard and will not operate unless you reinstall Windows on the drive on each new motherboard... One install for each motherboard.
My guess is that you will be fine if you change hard drives or do reinstalls or repair installs of the Windows on the new motherboard.
 

Read other 2 answers
RELEVANCY SCORE 42

N00b here; please correct me if I do something wrong. =D

My dad and I recently just about completely overhauled my computer; installed the OS from scratch and replaced the motherboard (actually, I think everything got replaced except for a hard drive, but I'm not sure).

But I installed Photoshop 7.0 (from the same CD as I installed it on my other machine) and it's doing weird things. I don't get any error messages or anything, but the color display is wrong. Such as the color picker and every color image (amusing as it would be for Legolas to be green, seeing as he is an elf, that picture is simply not supposed to be that way). Note how Blue hills.jpg is PINK. Yeah. I have NOT messed with any of the color settings - it's all at default, and it's doing this.

Also, when I try to install the 7.0.1 update, it will find the folder that Photoshop 7.0 is in, yet when I click "Next" for it to actually install, it says, "The Adobe Photoshop 7.0.1 Update program cannot find Adobe Photoshop 7.0 in C:\Program Files\Adobe\Photoshop 7.0\ -- Please attempt to locate Adobe Photoshop 7.0 again or cancel the update and install Adobe Photoshop 7.0 from the original disks or CD."

But it IS installed. And in that directory, too. I even uninstalled Photoshop and reinstalled it, and it still gives me that error message. The very same update file DID update Photoshop 7.0 on my old computer (unfortunately, I don't know what video card I had in at ... Read more

Read other answers
RELEVANCY SCORE 42

I have a Lenovo Y50-70 on Windows 10.  I have no probem at all with any app except Adobe Photoshop CC.  Photoshop starts pretty fast and after I import a couple of pictures, the cursor begins to lag to the point I cannot work and have to exit Photoshop.  For instance, if I click on File, it takes about 2 seconds for the dropdown menu to appear.  Then the cursor would not respond to my mouse movement like it normally does.  Again, it lags about 2 seconds. I have drivers updated for Intel HD 4600 and Nvdia Geforce GTX 860M.  Don't know what else to do and would appreciate your help.  Photoshop CC is not usable on my otherwise fine Lenovo Y50-70 Thank you!

Read other answers
RELEVANCY SCORE 41.6

Hi everybody,

Currently my computer's OS, Windows 7 Home 64, has been crashing quite often while doing tasks that were mention on the topic. Here is the details of the problem.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 18441

Additional information about the problem:
BCCode: 50
BCP1: FFFFF8800435F000
BCP2: 0000000000000001
BCP3: FFFFF880056A3452
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\050212-51168-01.dmp
C:\Users\Alison Goh\AppData\Local\Temp\WER-104598-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I am sorry, i am not very well verse in PC. But may I know how do I solve this problem?

Thank you for your help.

Alison

A:BSOD/Crashes while working on photoshop/surfing on Firefox/Idling

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 4 answers
RELEVANCY SCORE 41.2

Hi, I have a Lenovo W530 on which I reinstalled Windows 7 and lenovo softwares and drivers from scratch. Everything works well but for a very annoying detail: The ctrl+shift+s photoshop keyboard shortcut is not longer responding. It was working just before I did the re-install of Windows with the same photoshop installation package I have tried the following without success:- Installing Windows 10 and all the drivers/software and Photoshop (Decided I didn't like it as my PC was running 10 degrees celcius hotter)- re-installing the keyboard driver from the lenovo website on my fresh Windows 7 install- Switching fn/ctrl keys in the bios back and forth- Running Windows troubleshooter- There are no failing processes/services/exe in the reliability monitor nor in event viewer What works:- other keyboard shortcuts work well in photoshop- assigning another keyboard shortcut to save as in photoshop allows works Well it is minor, but bugging me!





W530, Windows 7 64bit, 256SSD Crucial M4 boot drive, 1tb WD Blue in Ultrabay, 16GB m-sata expresscache drive, NVIDIA K1000M, i7-3630QM processor, 8gb RAM 1600.

Read other answers