Over 1 million tech questions and answers.

No sound in subwoofer when using mediamonkey, vlc, netflix

Q: No sound in subwoofer when using mediamonkey, vlc, netflix

I setup a subwoofer to run from the pc from the orange hole to the sub via a 3.5mm to rca cable. I can't get it to play sound from any other program other than pandora, battlefield and youtube. VLC, netflix, mediamonkey all ignore the sub and don't use it. My speakers are connected to the computer through the green hole to the t amp (no sub out on the amp). I tried downloading my audio drivers but I get an error saying "can't find hd audio device". My motherboard is a gigabyte gaz77xd3h running on the latest f18i bios. When i was on 7 the drivers worked fine, but on 8.1 they don't install. I've tried the original version that came with the mobo and the most recent one and both don't work.

RELEVANCY SCORE 200
Preferred Solution: No sound in subwoofer when using mediamonkey, vlc, netflix

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: No sound in subwoofer when using mediamonkey, vlc, netflix

You apparently are trying to circumvent the speaker setup with the separate bass speaker. Audio systems are set up to feed audio based on how you have your speakers set up (e.g. 2.1 stereo , 5.1, etc). As you apparently have a 2.1 (or 2.0) speakers connected to the green speaker jack, what do you have the speaker type set as?

In multiple speaker setups such as a 4.1, 5.1, 7.1, etc although there are separate connections to the speaker jacks, its really controlled internally in the speaker system, not separate like you want to do it. What you are doing may work with some functions but its not the correct/legitimate setup.

Read other 1 answers
RELEVANCY SCORE 57.6

Hi guys...
I just plugged my Onkyo 6.1 Channel (S-680) to my computer. I connected the receiver to the Digital Out port of my motherboard (Intel 915GV Chipset-Asus PTGD1 - LA). It uses the Realtek ALC880 drivers. Whenever I open Sound Effect Manager and do the Speaker Test, sound comes only from my front speakers. The rears/centre/sub all light up but no sound is played. However, while running games/music/films I get sound from all my speakers (though not very satisfactory and not real surround sound). Can anyone please help me with this?

Also, I can't open Realtek HD Audio Manager (RTHDCPL.exe). Only RTLCPL.exe (Sound Effect Manager) works. When I click on RTHDCPL.exe nothing happens. Please do help out.

Thanks.
 

A:No Sound From Surround/Centre/Subwoofer In Realtek Sound Effect Manager Test

try this:

1) try to go to the settings of your sound effect manager & there are selections there for 2.0,2.1.5.1 or what ever you may find that corresponds to your speaker channel.

2) if nothing corresponds to the given selections,try to download the latest audio driver from your motherboard's manufacturer website.

3) otherwise,you need to plug-in a sound card that has the feature to play with 6.1 channel audio.

goodluck
 

Read other 8 answers
RELEVANCY SCORE 54.8

I was playing music on my real player then my subwoofer quit working.
We unplugged then plugged back in no help.
We cleaned it no help.
If you hold the subwoofer and blow in it while music is playing the subwoofer works, but who wants to hol a subwoofer just to hear more bass.
The subwoofer is for our computer desktop.
Please help if you can.
TexasChipee
 

A:No Sound From Subwoofer

Read other 10 answers
RELEVANCY SCORE 54.8

Hi everyone

Recently i upgraded my GC to Sapphire 5750 as well as my HDD, so I do a clean windows 7 installation. The problem with my sound is, i need to turn the bass volume high (almost max) to actually hear very low bass sound from it. I never had this problem before upgrading

Im using Edifier M3300SF, tried set it as 5.1 but still the same problem..

hope guys here can help me, and if more info is needed..thanks

A:Subwoofer very low sound

hwchan, welcome to the forums.

When adjusting the bass volume is this from within Windows or using the volume knob on the sub itself?

Also have installed/updated the drivers for your onboard Realtek audio?

Latest Realtek HD Audio Driver Version

Read other 9 answers
RELEVANCY SCORE 54.8

Hey,

So i have on-board realtek HD audio card (6 jack) with my 5.1 system connected via 3 jacks (front , surround & sub). The problem is that i've just run the auto calibration thing with the microphone and it worked fine and calibrated all of my speakers, but now my subwoofer doesnt work with ANY playback at all inc. movies and music etc.

My system automatically does its own "speaker fill" if just a stereo input is connected - which is what it was until i performed the calibration tool. And i know that all of the jacks are connected in the proper place because when i go into settings - (the screen where you can click on each individual speaker to test them), they all work fine.

I've noticed that if i use the EQ tool in WMP and turn it all to the max, i get some bass through - but only the real low-freq. stuff. It's not outputting the full range.

Like i said about my system working with just a stereo input - currently i can leave Front and Surround plugged in and unplug the Sub / Center cable - but then , obviously, i lose the speech as its coming from the center speaker.

Please help
Thanks

EDIT: Oh and also - everytime i download the realtek drivers for it - it says "This file cannot be unpacked.." so i googled that problem and tried installing windows installer 3.1 - which then told me i haven't got enough storage to perform the request. ??

A:No subwoofer with 5.1 sound.

sorted it
needed the official driver

Read other 1 answers
RELEVANCY SCORE 54

Hello everyone, I've just got my new PC and I've got a problem with my new audio system.. I have a 2.1 Speaker system and I don't hear any sound from my subwoofer. I've looked for the problem on Google, I tried to update my drivers, I tried almost everything. A little help would be welcome, thank you!

Specs:

A:No sound from subwoofer in Windows 8.1!

Do you have separate input to subwoofer and did you check "Enable Bass Management" ?

Read other 5 answers
RELEVANCY SCORE 53.6

Hello,
i have important question, which is annoying me all day yet. I really dont know what to do yet. I have problem with my 5.1 audio speakers ( Genius sw-hf 5.1 4500 ,230V-EU ) . I am daily using windows 10 and i had my speakers connected to pc as stereo /2xcinch to 3,5mm jack connected to line-out conector/ . Everything worked fine.

My speakers are 5.1 and this motherboard which i bought, has 7.1-CHannel, so i wanted connect my speakers as 5.1 system and use for gaming....
Problem is that SUBWOOFER IS NOT PLAYING. I tried couple times reinstall couple drivers from realtek or check and connect speakers different way but i still didnt figure it out and its really annyoing yet. I installed windows 7 on second HDD but even in win7 is not working too! When i am using stereo then is everything fine...

Right now i have connected my speakers like this :
-subwoofer+central by reduction (which i did buy specially because wasnt in package with speakers) 2xcinch-3,5mm jack connected to CS-Out
-rear same reduction connected to RS-Out
-front same reduction connected to Line-Out

In realtek HD Audio Manager i choosed 5.1 , when i was connecting speakers i ticked what i am connecting ,but when i connected front into Line-Out it didnt pop-up any window to confirm that speakers (but they are playing) ..

When i am ticking choice ,,swap center/subwoofer output, subwoofer is playing center sound and i feel basses, so subwoofer is working, its not physical y broken,.
I wan... Read more

Read other answers
RELEVANCY SCORE 53.6

I am using XPS 15 L502X laptop. From 1st Jul 2016 my laptop subwoofer starts shuttering. I guess this is after Windows 10 upgrade patch. I tried to revert my patch upgrade but no luck. I guess my drivers are corrupt. 

Please let me know from where can I download its drivers or how to disable this JBL subwoofer? 

A:JBL subwoofer sound shuttering / fluttering

AshishDCXPS 15 L502X laptop
AshishDCWindows 10
AshishDCwhere can I download its drivers
Hello. Dell does not support Windows 8.1 or 10 on the XPS L502x model and cautions that you might lose some functionality if you do run Win10. There is no Dell-provided audio driver for your laptop with Windows 10.
However you should be able to install the Realtek audio driver for Windows 8 with no problem.
If there is a problem, try to install the driver with Compatibility mode:
1. Download and save the audio driver to your desktop or any convenient location on the hard drive.  2. Double click on the new folder to extract (unzip) the driver files.3. The extractor wizard will create a new folder for the driver files. It will be at "c:\dell\drivers\xxxxxx". Write down the exact location that the wizard creates. 4. If the driver begins to install automatically, halt (cancel) the installation.5. Browse to the driver files on the hard drive (the location you wrote down).6. Find the "setup.exe" file.7. Right click on setup.exe to open the context menu.8. Select the Properties.9. Select the Compatibility tab.10. Check the box "run this program in compatibility mode for Win8.
AshishDChow to disable this JBL subwoofer
I don't know if there is a way on your model or not. In one of the other threads that you posted on today, one of the moderators had posted an earlier reply saying that there is no way to disable. You could look through the BIOS settings. At la... Read more

Read other 1 answers
RELEVANCY SCORE 53.6

..i've noticed that my subwoofer sometimes opens with sound already muted!!! i have to unmute it via the remote control, is this normal?

..this dude who sold it to me told me its normal, thats what the remote control is for, but what if the remote got bused or something? its kinda too late to return it now, can i fix it?
 

Read other answers
RELEVANCY SCORE 53.6

Hello, I own a HP Pavilion DV7 1183cl laptop with the following specs:

Windows 7 32-bit Home Premium
Intel Core 2 Duo 2GHz
2GB RAM
Radeon 9800M GT w/512MB

I've recently run into this problem:

Yesterday (5/13/2011), Windows told me I needed to install some critical updates. I installed them and restarted. When I restarted, I noticed that the mute button on my touchbar was red and wouldn't turn back to the on color.

I logged into Windows and tried playing some Youtube videos and stuff to see if the sound was working. It turns out it was, but the sound was only coming out of the subwoofer on the bottom of the laptop and sounded TERRIBLE. When I plug in my headphones it sounds fine except the volume doesn't go as loud as it did before. Pressing the mute button does mute the sound, but it still stays red no matter what.

So I tried resotring my system back to a point when the speakers were working to see if it was a hardware problem, and it turns out it's not. When I restore to an earlier point, the speakers work fine. The problem, however, is for some stupid reason I can't login at the restore point. I just know the speakers work because the error sound comes out of the Altec Lansings on the front, and the mute button actually changes colors.

I've spent the last 3 hours trying everything I can think of. I've downloaded new IDT High Def Audio Drivers, I've uninstilled them in hardware manager and let it reinstall itself, messed with every setting I can think... Read more

A:Sound only playing out of laptop Subwoofer

Try updating IDT codec from HP site along with other updates, such as HP buttons -

http://h10025.www1.hp.com/ewfrf/wc/s...roduct=3802977

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 53.6

Hello,
i have important question, which is annoying me all day yet. I really dont know what to do yet. I have problem with my 5.1 audio speakers ( Genius sw-hf 5.1 4500 ,230V-EU ) . I am daily using windows 10 and i had my speakers connected to pc as stereo /2xcinch to 3,5mm jack connected to line-out conector/ . Everything worked fine.

My speakers are 5.1 and this motherboard which i bought, has 7.1-CHannel, so i wanted connect my speakers as 5.1 system and use for gaming....
Problem is that SUBWOOFER IS NOT PLAYING. I tried couple times reinstall couple drivers from realtek or check and connect speakers different way but i still didnt figure it out and its really annyoing yet. I installed windows 7 on second HDD but even in win7 is not working too! When i am using stereo then is everything fine...

Right now i have connected my speakers like this :
-subwoofer+central by reduction (which i did buy specially because wasnt in package with speakers) 2xcinch-3,5mm jack connected to CS-Out
-rear same reduction connected to RS-Out
-front same reduction connected to Line-Out

In realtek HD Audio Manager i choosed 5.1 , when i was connecting speakers i ticked what i am connecting ,but when i connected front into Line-Out it didnt pop-up any window to confirm that speakers (but they are playing) ..

When i am ticking choice ,,swap center/subwoofer output, subwoofer is playing center sound and i feel basses, so subwoofer is working, its not physical y broken,.
I wan... Read more

Read other answers
RELEVANCY SCORE 53.6

Hi,

I just upgraded my HP dv7-1135ea from Vista to Windows 7 RC and the speakers are not producing sound, only the reflex subwoofer at the base of the laptop is producing sound.

Is there something I can do to get the speakers working? While installing Windows 7, the installation complained of a compatibility issue with Quick Launch Buttons, could this be the reason for the abnormal behaviour and what can I do to rectify this?

Please help.

daysey

A:No Sound from speakers only from reflex subwoofer

Hi, greeneggsam, The OP was made on the 28th of may, I would call that some patience.

Read other 1 answers
RELEVANCY SCORE 53.6

Hello
My brand new xps L501X arrived last week (Wednesday).
Since the first time i hit the startup button, i noticed a ticking sound from
the bottom subwoofer (2.1 JBL speakers + waves audio:
stereo speakers and subwoofer). I
updated all my drivers and bios and it’s still there. So did something go wrong in the assembly?
Or did I miss something? Someone with a simelar problem? 

 
Some observations:
There’s no steady pattern
It’s happens a few times a minute
No cell phones or whatsoever nearby ((tried it on different locations, still there)
It’s really annoying me
 
Thanks

A:xps L501X: Ticking sound from jbl subwoofer

I just received my new custom built L501X on Tuesday (30th Nov) and I have the exact same problem.  It is a minor clicking / popping noise that occurs seemingly at random whether I am on the desktop, running an application or even playing a game.  I noticed it first coming from the built in speakers but now have external speakers plugged in and can hear it coming though them as well.  Also when wearing headphones it is quite noticable so I have to assume it is something to do with the sound card.  It's not the worst thing in the world but as with any new expensive long term purchase like a laptop we want it to be as perfect as possible.
Same basic observations as the above post.  I have also tried disabling the built in mic as I figured this might be
causing some interference but popping noise still occurs.  One thing I have noticed is that the noise seems to occur much more frequently when I am navigating around "my computer" or when I am working in the control panel windows.  I also notice the popping noise just before the windows sound effect when I click to transition back or forth into folders and then it will always occur again 4 seconds after.
Aha....I think I might have actually just solved the problem while writing this!!  I have gone into control panel, sounds, and turned off the sound effect for "start navigation" and presto...I'm not hearing the click at all any more.  Will have to see if... Read more

Read other 27 answers
RELEVANCY SCORE 53.6

Subwoofer and Sound  issue :  Windows 8.1 pro all sound worked fine;  Windows 10 lots of issues with sound. I set system up to use stereo speakers left and right this works as expected tinny and unacceptable . Set up to use subwoofer in 2.1 speakers and using varied sources of sound is a mix bag as to what works. some sources voice is distorted through sub background sounds through left and right speakers while others sources no sub at all just tinny sound,  If I use edge to go online some sound is 2.1 as should be but others web site distorted or no sub. Use Acuradio no sub at all.  Use Homerun tv tuner few channels work ok with sub most distorted or no sub. use hdmi input from a rogers cable box no sub. use my own audio files no sub. wonder if that ___ HDCP crap  is at fault.  I Have tested with Beats audio control  and  just Windows 10 default audio no difference all updated drivers done spent hours on this issue.Totally unacceptable behavior using windows 10.   Good sound is a must including subwoofer on all sources as was case in windows 8.1. I bought this system because it had a dedicated Subwoofer output jack wish my HP laptop did.May 22 2016 only a few days for my option to revert back to windows 8.1 or will be stuck with Windows 10.  This is not a cheap or Old computer There should be no issues upgrading This system to windows 10 at this late date. I jus... Read more

Read other answers
RELEVANCY SCORE 53.6

Hello. I've posted this on a couple different message boards to try to get some help and so far I haven't gotten any replies. Hopefully you guys can help. Here we go:

HP Pavilion DV7 1183cl, Windows 7 x32, Sound only playing out of subwoofer:

Yesterday (5/13/2011), Windows told me I needed to install some critical updates. I installed them and restarted. When I restarted, I noticed that the mute button on my touchbar was red and wouldn't turn back to the on color.

I logged into Windows and tried playing some Youtube videos and stuff to see if the sound was working. It turns out it was, but the sound was only coming out of the subwoofer on the bottom of the laptop and sounded TERRIBLE. When I plug in my headphones it sounds fine except the volume doesn't go as loud as it did before. Pressing the mute button does mute the sound, but it still stays red no matter what.

So I tried resotring my system back to a point when the speakers were working to see if it was a hardware problem, and it turns out it's not. When I restore to an earlier point, the speakers work fine. The problem, however, is for some stupid reason I can't login at the restore point. I just know the speakers work because the error sound comes out of the Altec Lansings on the front, and the mute button actually changes colors.

I've spent the last 3 hours trying everything I can think of. I've downloaded new IDT High Def Audio Drivers, I've uninstilled them in hard... Read more

Read other answers
RELEVANCY SCORE 53.6

hey , i have a 5.1 speaker system by creative and i have a question ;
is there any program that can make my normal speakers sound quiter but to leave my subwoofer the same loudness ... i might not be very clear and i cannot express myself very good but i have an example : in the sound section in control panel you can make the right speaker louder or left (and such) and there is also an option for subwoofer but it wont make it louder... so basicly my question is can i make my subwoofer sound louder compared to the other speakers ?

A:Making Subwoofer Sound Louder

you could try messing with the EQ in your media player. boost the bass frequencies (125Hz and lower). i recommend against this though, you are changing what the music is supposed to sound like.

Read other 9 answers
RELEVANCY SCORE 52.8

Hi Guys!

I hope I'll get an useful answer here!

My problem is that i don't get any bass out of my subwoofer, my system (as i configurate) recognizes my subwoofer, but as soon as i listen to music there's no sound coming out of it!
My other speakers work, but only the bass is missing!

I wanted to install the console launcher from CD, but in Setup windows said "couldn't find any compatible hardware. Setup will be closed"

But i do not find any latest console launcher in Creative technical support, that's compatible with my Live 24 bit soundcard.

I started this thread, because i couldn't contact any other user who's problem was solved ^^

Greetz from Germany
Mitch

A:Creative Sound Blaster Live 24 Bit - No Subwoofer

Problem solved

i just downloaded and installed this supportpack!
hell yeah it works

SB P17X Series Support Pack 2.0 (07/31/2009) - Aud... - Creative Labs

Read other 1 answers
RELEVANCY SCORE 52.8

Hi all this is my first post here..

First of all I have an Acer 5943G model laptop. I have a weird issue since yesterday when I upgraded from Windows 7 to 10. Everything is working fine except that all sound is coming from the subwoofer speaker beneath the laptop instead of the R L speakers above the keyboard.

I have downloaded and updated the latest Realtek HD Audio drivers etc and have gone through the sound settings time and time again to ensure that everything is right. Everything is indeed right in the settings so I really don't know what else I can do to be able to fix this problem. I know this is not a hardware issue because the speakers were working fine on Windows 7.

I have also plugged in my headphones to test the sound that way and it works as it should, I do get stereo sound on my headphones.

Any suggestion is greatly appreciated as I really don't know how to fix this after spending hours on it. Thanks in advance.

A:Laptop sound coming from subwoofer instead of RL speakers.

Check to see if the PC came with any Sound Enhancement, such as Dolby, SoundBlaster MB, etc. Could be one of those is not Windows 10 compatible and causing the problem, or may just a configuration.

One other thing you can try, even though you downloaded the Realtek. Go to the Device Manager, RIGHT click on the Realtek sound entry to highlight it and then LEFT click "Uninstall". DO NOT uninstall the drivers. Restart the PC and when Windows starts it will detect and reinstall the sound. This fixes a lot of problems and may take care of yours.

Read other 2 answers
RELEVANCY SCORE 52.8

Hi. I recently ordered a Frisby FS-5020BT, along with an Optimal Shop 5.1 external sound card. For some reason, stereo audio doesn't redirect low frequency sounds to the subwoofer channel and instead only utilizes the front left and right speakers. When playing 5.1 content, such as a Blu-Ray movie, all 5 channels and the subwoofer are used, like they are supposed to. When I run the sound test in audio playback devices options, the subwoofer does vibrate. Is there some driver I need to install to get stereo audio to utilize the subwoofer, or will I just have to get used to no real bass when playing music from YouTube? Any help is appreciated.

Read other answers
RELEVANCY SCORE 52.8
A:Genius SW-5.1 1005 -- only getting sound from subwoofer and one speaker

You have no installation manual? What type of audio or sound card are you using to drive this new sound system?
 

Read other 5 answers
RELEVANCY SCORE 52.8

New 17 R3 delivered today.  No subwoofer.  Really subpar sound from working front speakers.  However, headphones work well and eq works great with them.
Is there a chance that the subwoofer isn't connected?  No sound at all coming from it.
Checked device manager and everything is fine.  Tried installing driver from Dell found in my account.  Still no subwoofer sounds at all, not even a crackle.
Seems weird for a new AW build to be missing subwoofer functionality.

Read other answers
RELEVANCY SCORE 52.8

Hi everybody.

Well i have a stereo 5.1 system by Creative, version SBS 580.
When i first got the computer everything was fine, then my brother bought those headphones, so we didnt use the speakers at all.
so after about 1-2 years without use i plugged them in and tried to use them.
The problem occured was that only the subwoofer worked, none of the speaked did,
and the subwoofer only worked at the "Realtek HD Audio Manager" program.
I tried reading forums of creative, tried to connect the system to the computer in many ways, all of the ways give me the same result, only the subwoofer produces sound.
the way creative's guide say to connect the speakers is like that :
ImageShack? - Online Photo and Video Hosting
The program that im using is "Realtek HD Audio Manager" :
ImageShack? - Online Photo and Video Hosting

so when i play this play button, only the subwoofer makes the sound, non of the speakers. All of them are connected to the subwoofer correctly, they are turned on.
no technical problems.

Is it a driver's problem?

Please help me, Im exhausted...

A:Surround 5.1 problem, Only subwoofer produces sound

As the subwoofer also contains the amplifier(s) and routing of sound, I would suspect that is where the problem is.

You can verify that you are getting audio output from each of the three PC sound connections by hooking a headset to each output and playing audio. If you hear audio (it will only be that channel) from each output then that isolates the problem to the speaker system. On the other hand, if you do not hear audio from all the jacks, make sure 5.1 is set in the Sound Panel, playback section. Click on the speakers icon to highlight it and then click on the Configure button and select 5.1. If that doesn't fix it, reinstall the PC Vendor or motherboard if its a home built system, RealTek audio drivers. They will work better than non-Vendor drivers.

Read other 1 answers
RELEVANCY SCORE 52.8

I recently bought a creative 5.1 sound system for my pc, but every now and then (usually when a new screen opens) the sub woofer makes a noise.
Ive tried several things and I think ive narrowed it down to windows sound effect or sound card.The sound effect is when there is a screen change which is being detected and played by the bass woofer. I'm not sure where I would find this in the control panel I have looked and cant see where to disable.
Regarding the sound card, if your monitor has built in speakers and your sound card is getting confused between the different systems.
Any help would be greatly appreciated.
Thanks in advance
 

A:Sound issue -- noise coming from subwoofer

I think you can find all the Windows sounds under Control Panel->Sound->Sounds tab. You can select a system sound and then hit the Play button (it's the right arrow button) to play and hear it through your speakers. Don't know why you're having the problem but is one way to check system sound playback
 

Read other 2 answers
RELEVANCY SCORE 52.8

Hi there, So I recently had to get my Harddrive replaced, and OS (Windows 7 Home Premium) reinstalled through a company. However on return of the laptop, my sound and other things were messed up.  (Dell XPS L502X)- WavesMaxx Buttons not working/ no MaxxAudio- Sound appears to only come out of the central subwoofer, despite not failing any hardware tests. Its almost like the L n R treble speakers are being ignored. Something is majorly unbalanced. - Fn Keyboard Functions not working. -  e.g I cant turn the Wifi  on/off or lock my touchpad. Given the company (caused a huge faff with a ton of screw ups on their part to even get my laptop back I really don't want to take it back to them) I decided to try and fix some things myself. - Used the utilities disk to reinstall Quickset64 which now means that the Waves Button Now works to bring up MaxxAudio, but the speakers still aren't working and the EQ sliders don't change anything. - Tested using Dells 32 bit hardware diagnosis, and no errors, but the LnR still seems to be coming out of the Subwoofer located in the centre during the test play. - Deleted and reinstall all the realtek drivers from both the utilities disk, AND the Dell website. And basically I still haven't manage to fix the problem. - Headphones output  has always worked completely fine. These issues did not exist before the OS reinstall, so I thought it was drivers, but now I really have... Read more

A:Dell XPS L502X sound only playing through Subwoofer

Offshot1stnot that you'd even need to take the speakers out to change the harddrive... 
True, but do have to remove the palm rest assembly. It could be that they didn't know how to get to the hard drive and took the whole thing apart.
Offshot1stI'm at a loss as to what to test next, without literally taking the whole laptop apart physically and checking the speakers haven't been plugged in wrong
That's what you would have to do if you want to fix it yourself and don't want to take it somewhere to be worked on. You can download the XPS L502x Service Manual which has clear instructions for disassembly.
Offshot1stTested using Dells 32 bit hardware diagnosis, and no errors, but the LnR still seems to be coming out of the Subwoofer located in the centre during the test play. 
The audio part is interactive. If you don't hear the music coming through the speakers during the test, then that is the error. If it were a software problem that you could fix with drivers etc., you would hear audio as expected during the test.

Read other 1 answers
RELEVANCY SCORE 52.4

Hi,

I have Sound Blaster Live! 24-bit external. I've installed Win7 beta drivers from creative. com (1.01.0092). But no sound is comming form subwoofer. When I open creative audio control panel I don't have bass redirection tab, like in WinXP. Did anyone have the same problem?
Thanks

A:Sound Blaster Live! 24-bit external - dead subwoofer

I also do not have any sound from my subwoofer when I play normal music. When I'm watching TV and the station supports 5.1 sound then all is ok. It's only stereo musik where it does not work.

Any ideas?

Read other 9 answers
RELEVANCY SCORE 52.4

Hi All,
recently after installing windows 8 my subwoofer has started producing crackling sounds when playing any video or music..i went through many similar posts on this forum but none helped...i reinstalled my windows 7 64bit provided by Dell itself and installed all the updated drivers...still its producing the same crackling sound.
it very irritating and also this laptop's one of the fascinating feature was subwoofer..i want it working can anyone help me with this??
and i expect Dell to go through this once.

A:Dell XPS15 L502X subwoofer crackling sound

akm151i reinstalled my windows 7 64bit provided by Dell itself and installed all the updated drivers...still its producing the same crackling sound.
Hello. Have you listened for the crackling through headphones? If the noise is not in the 'phones, only in the speaker, then probably the speaker needs to be replaced. This is particularly likely if the issue happens with both Win7 and 8, and with different audio drivers.

You can find the instructions for replacing the speaker on page 75 of the XPS L502x Service Manual.

Read other 1 answers
RELEVANCY SCORE 52.4

So, here's my issue. I have Creative Inspire 5.1 Digital 5500 speakers. I originally had them connected to my computer via a single line. So, I took the inputs from the speakers' console and directly connected everything to my computer. Now, I have surround sound (Wahoo!). But, the subwoofer only works when I'm configuring through the Control Panel. But, when I play music, I get zero sound from it.

Also, I have to set the properties in Sound to 7.1 to get all 5 speakers working. And the sub still works when running the test in 7.1 too. I've gone through every program that I can find on my computer that relates to sound and have set everything to 5.1 for now. I don't understand why I don't have sound from my subwoofer.

A:Subwoofer plays when configuring sound, but not when playing music.

Hi ruste84,

Since the speakers are producing 'surround sound' while configuration, it appears that the 'audio track' that you are trying to listen to is a standard '2 channel audio file'. You may try a digitally encoded 'surround sound audio' (a retail DVD with known 5.1 audio) to check if the 'speakers' work as desired.

If the issue persists, please confirm that the physical connections of the 'speakers' are setup properly. For reference, you may want to have a look at the recommended 'setup' for the motherboard installed 'ASUS Crosshair IV Formula'.
Also use the 'X-Fi CMSS-3D Panel' to configure 3D virtual surround effects. (Reference image below)
Hope this helps. Do reply with the findings.

Read other 5 answers
RELEVANCY SCORE 52.4

Hello.After upgrade to Win 10 x64 sound only from subwoofer. No sound from front speakers. I tried reinstall audio drivers but have no success.Pls help.

Read other answers
RELEVANCY SCORE 52

When I atempt to view a movie from Netflix streaming i do not have sound. The image quality is fine.I am using HDMI. 

A:no sound with Netflix

Hi @alp50  Welcome to the HP Support Forums! I understand that you are not getting sound from Netflix via the HDMI connection. I am happy to assist. Do you get any sound when using Netflix directly to your notebook, or is it only when play the video to the other display or TV via the HDMI cable? Are the any other websites that you have noticed the same problem with? Using that same HDMI connection, do you get sound using other applications? Also, please post the full product number for your notebook. See the following if you need help in finding that.How Do I Find My Model Number or Product Number?

Read other 6 answers
RELEVANCY SCORE 51.6

Hi all this is my first post here..

First of all I have an Acer 5943G model laptop. I have a weird issue since yesterday when I upgraded from Windows 7 to 10. Everything is working fine except that all sound is coming from the subwoofer speaker beneath the laptop instead of the R L speakers above the keyboard.

I have downloaded and updated the latest Realtek HD Audio drivers etc and have gone through the sound settings time and time again to ensure that everything is right. Everything is indeed right in the settings so I really don't know what else I can do to be able to fix this problem. I know this is not a hardware issue because the speakers were working fine on Windows 7.

I have also plugged in my headphones to test the sound that way and it works as it should, I do get stereo sound on my headphones.

Any suggestion is greatly appreciated as I really don't know how to fix this after spending hours on it.
Thanks in advance.
 

Read other answers
RELEVANCY SCORE 51.2

Hello and thanks in advance for any suggestions with this issue.
OK my audio is on my mobo and currently I run an audio optical out to a DA converter and into my stereo which works beyond great. All my dvd's and blue rays play perfectly so here's the challenge. Recent signed up for Netflix and now with the 1st and 2nd dvd when their inserted into the optical drive it plays perfect but has no audio. I remove the disk from the optical drive bay and it returns sometimes or if I make another audio device default then switch back to the Realtek Digital Output (Optical). If I play this on my laptop or my other desktop rig it plays with sound just as it should. Odd very odd !

A:Odd sound issue with only Netflix dvd's

All realtek drivers are up to date.

Read other 4 answers
RELEVANCY SCORE 51.2

Hi there. Everytime I try to use netflix on the app, chrome, or explorer that is an awful crakling and popping sound in the background but the sound doesnt happen when I am on youtube, spotify, ect... what should I do (please keep in mind in do not know much about computers)

Read other answers
RELEVANCY SCORE 51.2

System - Windows 7 Professional 64 bit
Motherboard - Gigabyte GA-880GMA-UD2H
Sound - Realtek on motherboard
Speakers - Altec AVS300

My problem is that I cannot figure out how to get sound playing from my left speaker and also the subwoofer. It worked fine on my previous Win XP system.
As far as I can tell only the right speaker works.

The Altec systen has 2 speakers and a subwoofer with 1 leads that plugs into the motherboard. I used the Green connector on the back of the motherboard.

The realtek HD Audio Manager does not a a 2 speaker plus subwoofer configuration.

Any help would be appreciated.

Thanks.

A:Realtek no sound in left speaker or subwoofer using Altec AVS300 speak

I think your stereo cable has the problem, try connect with your TV or ipod and see if both speakers and subwoofer are working or not. If not, then you may have to buy a stereo cable. Hope this helps

Read other 1 answers
RELEVANCY SCORE 50

Windows 8 makes a three tone sound and netflix pauses.

I suspect it also crashes my games when it says it.

I have tried replacing my RAM, but it still does it.

I have never had BSOD and windows does not stall or crash in any way.

I reinstalled from windows 7 to windows 8 about a week ago. Windows 7 worked fine.

Hope you can help! Tell me if you need more info.

A:Windows 8 makes a sound and pauses netflix.

hi, i would make sure i have the latest video device drivers for win8 installed ,check you computer manufactures web site support and drivers section for latest drivers for win8

Read other 3 answers
RELEVANCY SCORE 50

The sound works when I go back to TV.  I also cannot get sound on the computer on netflix.  everything else works I get sound on the Tv and the computer with other apps.  Just nothing on netflix.

Read other answers
RELEVANCY SCORE 49.6

This occurs sometimes several times a day, sometimes it does not happen for a few days. It first started in August after I did a fresh install of the OS (had bad malware) and updated the drivers using the CD that came with my computer (Alienware X-51). After about 2 months the problem went away but started again in February. The freeze usually happens within 5-10 minutes of starting up my computer.

Sometimes it is a BSOD and it reboots after a few seconds, usually it is just the frozen screen and buzzing noise, and does not respond to any input.

The problem happens 99% of the time during a video (Netflix) or when playing a game. This might not be meaningful, I use this computer mostly for those tasks.

I have my graphics card up to date, and have tried using Control Panel to automatically update the drivers for my various components. AFAIK I have done everything to update my computer's drivers short of using 3rd party software like DriverUpdate but I have heard that those are scams.

I have run memory diagnostic and it came back clean. I have dusted out the internal components. Any help would be appreciated, thanks.

A:Freeze + buzzing sound during Netflix and games, inconsistant.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c000001d, fffff88004125136, fffff8800a1189e0, 0}

Probably caused by : avgidsdrivera.sys ( avgidsdrivera+34136 )

Followup: MachineOwner
---------
Replace AVG with MSE for testing.

Read other 9 answers
RELEVANCY SCORE 49.6

I'm not quite sure whether to post this here or in "Games" but here is the problem. We were watching "The Office" on Netflix the other evening when a sound resembling the "weee-oooo weee-oooo" of a British emergency vehicle's siren began. I exited to the browser and it stopped. Oddly, it seemed to start with about six minutes remaining. It would repeat a few times and then not appear again until about the same point in the next episode.

Last night I was playing "Din's Curse" when it happened again. This time however, after stopping it by goint to "Options--Sound" it would recommence within a few seconds. For want of anything else to try, I exit the game and went into the "Abit EQ Sound Effects Editor" and changing the active sound effect, which, curiously enough, seemed to help the problem for awhile, but then it returned. Some please help.

I have Windows XP and no sound card.
 

A:A sound like a Britiish siren interrupts Netflix and games

Likely the result of some software that is running. Could be anything from your AV software to malware.
 

Read other 1 answers
RELEVANCY SCORE 49.2

Hi Lenovo and everyone, I have two issues with the sound of my Y700-15ISK:I.When any Realtek driver is installed that includes support for the subwoofer, a high pass filter is applied on the main stereo speakers, making sound poorer and more mono-like, especially with enhanced bass using an equalizer.(High pass filter removes low bass frequencies from the main stereo speakers.)(When the default Microsoft driver is installed that does not have subwoofer support, no high pass filter is applied on the main stereo speakers.)Is there a way to disable the high pass filter? I would like bass to come from the main stereo speakers as well. I see no such option on any of the available GUIs, is there such an option from a Command Line Interface?If there is no such option currently, could you put this option in a subsequent driver release, or simply remove the high pass filter from the driver?If you do not have the resources to do so, could you enable us to modify the driver source code and create a custom driver without high pass filter? I am sure the community would love the enhanced music coming from this and similar laptops using the updated driver.(Win 10 or Win7) II.Only on Win7:Subwoofer is out of sync with the main stereo speakers resulting in echo.Happens using Lenovo's Win7 64-bit, Win10 64-bit, and Realtek's generic driver as well. Could you guys fix this? Does anyone have a solution for these? Thanks,Andras

Read other answers
RELEVANCY SCORE 49.2

I have a WindowsVista (2007) system and a Toshiba laptop (2008). I tried to play NetFlix instant movies and when playing, there was a bad 'tinny' digital sound playing over the dialog. I used to be able to play YouTube videos just fine, but now cannot. This change happened after I contacted Microsoft Support (directed there by NetFlix support). Initially, NetFlix told me that there was a problem with Silverlight. So, Microsoft told me to uninstall and reinstall Silverlight. This did not improve the problem. Then, Microsoft told me to install a K-light Codec pack (4.4.5) and this did not help either. Microsoft told me to do something else, but I decided to write to a site like this in an effort to get some more useful help. Do you think it's Silverlight or Flash or what. No matter the volume on my computer (at max of 100) neither YouTube nor NetFlix play appropriately. When I play computer CDs (audio) the audio is just fine. PLEASE HELP! THANKS!
 

A:Poor Sound (digital sounds) When Playing Netflix and YouTube

Hey
Maybe it is just that your speakers have a problem. Have you tried different speakers?
It might be the input where the spike goes in the computer.

Hope this helps
 

Read other 2 answers
RELEVANCY SCORE 48.8

I have a HP Pavilion Entertainment PC (laptop) that used to run any video from any website. Then it seems that after it updated Adobe Flash Player, the video on some websites is extremely choppy but the sound works.

The websites where I can't view the videos are:
weather.com
cnn (and other news channels)
facebook (ie: posts by friends who shared videos)

The websites that I CAN view the videos are:
hulu
youtube
netflix

I used Internet Explorer and operate under Windows 7. The videos are so choppy that they're impossible to watch. Also I find that if I move the mouse over the video, parts of it clears up for a split second.
 

A:Very Choppy videos/sound on some sites (ie: weather.com)but Netflix and Youtube work!

Right-click inside a running video and select Settings...

Once in there, select the Display tab and uncheck the "Enable hardware acceleration" box:
 

Read other 1 answers
RELEVANCY SCORE 46.4

I have been perusing the MM website and forums regarding using MM with the Mac OS.

I see information about downloading PlayOnMac, configuring the sound driver, adding other applications, etc. Are ALL of these things necessary to use MM on my Mac?

I would like to find a good alternative to iTunes because I don't like the way it reorganizes directories, among other issues. But going through the process of downloading other applications, besides MM, configuring sound drivers, etc. is something I don't feel comfortable doing because it sounds too complicated.
 

A:MediaMonkey and the Mac OS

Nice info
____________________

 

Read other 1 answers
RELEVANCY SCORE 46.4

Has anyone had any problems using MediaMonkey? I want to rip music from CD's to the hard disk and have them filed alphabetically in one list. It seems to do the job. Any other opinions to the contrary. thanks dmrandagk
 

Read other answers
RELEVANCY SCORE 46.4

I am using MM V4.0.2.1462 (free version) - I am extremely new to MM.
Although I have dscovered how to 'prevent' all music tracks from overlapping at the start/end of every track (in the DirectSound Output plug-in window), I am a little confused in how to lengthen the gap between music tracks. I originally assumed that dragging/increasing the slider switch would do the job, I found out I was mistaken (maybe I'm in the wrong window).
Could someone please describe the process for lengthening the gaps; thanks in advance.

A:MediaMonkey

There is no setting to lengthen silence between songs when using Media Monkey.

Read other 1 answers
RELEVANCY SCORE 46.4

I just posted this thread here since I couldn't find a better place to do so.

A few days ago, my MediaMonkey track notification stopped working. I tried to re-install the program, but it still can't work. Can someone help?!!!

A:MediaMonkey pop-up

Try this:http://www.mediamonkey.com/forum/

Read other 1 answers
RELEVANCY SCORE 46

Sometimes, randomly, MM3 stops working and nothing plays. I then get several error messages that go on for ever and ever. The messages then stop after I click it, and I have to restart MM3. Please help. Also the bar thing at the top disapears and the application behind shows up as in the screenshot.

PPPJ

(details - XP SP2 Home Edition, 512mb RAM, running MM3.)
 

Read other answers