Over 1 million tech questions and answers.

Thinkpad T400 Volume Too Low

Q: Thinkpad T400 Volume Too Low

Hi, I've searched the forums and elsewhere online, and I can't find any real help for this issue. I'm running Win 7, and I have the most up-to-date drivers from the Lenovo site. I have turned on loudness equalization, but it has not helped the problem. This is an across-the-board problem. What I mean by that is, this problem persists regardless of the application, which I happen to be using. For instance, I use Media Player Classic: Home Cinema to watch movies. If the volume is at 0%, as I begin adjusting it upward, the volume level rises. However, as I reach about 70%, the volume stops increasing. There are audio adjustments w/in the application to boost the volume, but they serve to provide minimal effects. Overall, the volume is incredibly low. If you're sitting more than a few feet away from the laptop, it is inaudible. I don't know what else to do, and I was hoping that someone might offer some assistance. Thank you. Jeff













Solved!

Go to Solution.

RELEVANCY SCORE 200
Preferred Solution: Thinkpad T400 Volume Too Low

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Thinkpad T400 Volume Too Low

Welcome to Lenovo Community! jmg999

How about uninstall your current Conexant driver and install custom Dolby driver from my signature link? It should help to boost a lot. In fact, T400 speakers are louder than other new T-series speaker.

Peter
W520 (4284-A99)
Does someone?s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future | Please do not email me regarding technical problems, you could post it in the forum
=====================================
Sound Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Read other 9 answers
RELEVANCY SCORE 60.8

I just flashed me eeprom for some reasons, but now my think pad is not booting properly , it goes in bios automatically and after some time turns off.

A:Thinkpad t400 notbooting

Hi Punittiwari3353,
 
Welcome to Lenovo Community!
 

Have you checked it individually with battery and without battery?
Did you check with different power adapter or with different power socket?
Is the CPU fan running with regular speed?
Boot the system into ?Safe mode? and check if the issue persists there also?

Hope this helps. Do post back if the issue persists!
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 5 answers
RELEVANCY SCORE 60.8

I honestly have no clue what could have caused this!  I turned it on this morning & it was stuck on the booting screen. It read "ThinkPad" in large letters followed by "To interrupt normal start up, press the blue ThinkVantage button." I waited for about a half hour for it to boot & it never did. I of course pressed the ThinkVantage button & to my dismay...nothing happened. Afterwards, I unplugged it & removed the battery pack. I then plugged it back in & attempted to start it up again. Once again, nothing. I unplugged it again & attached the battery pack. At that point I tried starting it up again and N O T H I N G!  What do I do?!













Solved!

Go to Solution.

A:My ThinkPad T400 won't boot!

have a look at your usb ports, there could be some sort of pins touching, as the result of damaged usb pins.
 
 
ADMIN Edit - Link to related tip in our forum KB
 

Read other 9 answers
RELEVANCY SCORE 60.8

I have got refurbished laptop which is in amazing condition  just like new. I am going to upgrade my laptop with RAM and SSD.Laptop description. Intel Core 2 Duo CPUP8600 @ 2.40 Ghz2GB RamWindows XP 32 bit Pro RAM:-I am trying to upgrade the Ram with 8 Gb and will also upgrade with windows 64 bit 7 From lenovo site they have recommended  PC3-8500 1066MHz DDR3 But from Crucial site after scanning my laptop from their tool they have recommended: PC3-10600 1333MHz DDR3even many people have installed this Ram in there laptop and it works. Which is one more suitable ?... SSD: Which one is best?: Crucial M500 120GB SATA 2.5-Inch 7mm (with 9.5mm adapter) Internal Solid State Drive CT120M500SSD1  Samsung Electronics 840 EVO-Series 120GB 2.5-Inch SATA III Single Unit Version Internal Solid State ...  Samsung 840 Series 2.5 inch 120GB SATA III internal Solid State Drive (SSD) MZ-7TD120BW   













Solved!

Go to Solution.

A:thinkpad T400 Ram Upgrade

RAM: You need a minimum of PC3-8500 1066MHz DDR3. However faster chips like PC3-10600 1333MHz DDR3 or PC3-12800 1600MHz DDR3 will work fine as well.
 
If there's little or no difference in price I'd buy the faster memory. The reason is that if I upgrade to a new(er) notebook it's more likely the RAM will work at full speed on that system.
 
Note also that while you can upgrade to a maximum of 8GB (2x 4GB) with a 32-bit OS like WinXP-32 you won't be able to utilize more than 3GB.
 
SSD: Any of the drives you've listed will work well. 
 
 
 

Read other 9 answers
RELEVANCY SCORE 60.4

Hi,I have ThinkPad T400, which isnt supported on lenovo sites anymore and have problems with drivers or updates BIOS system, cant find nothing safe. I  have Windows 10 32-bit and works with small problems, but works quite good. But can try update BIOS for better results. Thank you very much.

A:ThinkPad T400 - BIOS update

you should be using the 64-bit version of windows 10 as for a BIOS update, the T400 is ok with the original one, the link is provided for the thread if an update is desired https://support.lenovo.com/ca/en/downloads/migr-70350  

Read other 1 answers
RELEVANCY SCORE 60.4

Now, I suspect that the inverters are fine and I'm wondering about the LCD switch or LCD cable. I suppose I could just buy a cable, but before that, I wanted to take a step back and try to figure out if I'm overlooking anything. I've not been able to find a picture or location of the t400 lcd switch in either the lenovo hardware manual for the t400 or elsewhere online.Hi,I've got a thinkpad t400 with CCFL backlight. I recently replaced a bad LCD (the backlight was working at the time) with a new one. However, while the new screen works, it's backlight did not. I ordered a new inverter and plugged that in - still didn't work. I grabbed the old screen's backlight and tried it with both inverters - did not come on. I then grabbed another laptop I have and plugged in the old screen's backlight - it came on. Plugged in the new screen's backlight (while lcd was still plugged into the thinkpad), it's backlight came on.So, I know both backlights are fine, and suspected I just had a crappy inverter. I got a replacement new inverter and it still doesn't work. Tried new lcd and old backlight with all three again, no dice. Backlights still turn on when connected to spare laptop. So I now suspect the inverters are fine. I noticed that the laptop no longer goes to sleep or hibernation when the lid is closed. I changed the power settings so that it should sleep or hibernate, tried each power mode and it still refuses to do so. So I think the issue is with the switch that detects when t... Read more

A:Thinkpad T400 Backlight Issue

Did you ever figure your problem out.  I have the exact same issue...  Thank!

Read other 7 answers
RELEVANCY SCORE 60.4

I have a T400-2764 that I have upgraded to Windows 10.  What do I have to download to have the best drivers and software for this system, like battery management, display management, and WiFi management???

Read other answers
RELEVANCY SCORE 60.4

I have a thinkpad T400. Couple of months ago the problem started. I could not shut it down it just keep re-booting. I had to press and hold the start button to shut it. Now it won't boot at all. It beeps 1-3-3-1 and just sits there. When I press start button all lights come ON for a while and after only battery , AC and Ready lights stay ON. Here are few things I did so far without any luck: 1. Removed battery and AC adaptor waited few minutes put it back - same problem2. Removed CMOS battery. DIMM cards waited for ten minutes replaced - same problem tried with swapping  DIMM cards - when I put only one card on top slot it says put the card on zero "bottom" position. After placing the Mem card on the bottom slot no thing happens. It beeps again and sit. When I checked in the manual it says either DIMM or System board. I do not know which one is giving me the problem. I just do not want to replace all parts without knowing. Can any body help please or had similar issue and solutions if you managed to solve it. Thank you. Roshni

A:Thinkpad T400 won't start just beep 1-3-3-1

If you tried both DIMM cards you have in the bottom slot, it sounds like tyhe system board, assuming they were seated correctly

Read other 9 answers
RELEVANCY SCORE 59.6

I put my Thinkpad T400 in hibernate, but next morning I could not boot. When I press the power button, the lights below the screen turning on and I hear the sound of the hard disk, and the turns off. I do not even see anything on the screen; it is just black. The process keeps on repeating in a loop, unless I press the power button to turn off. I have tried the static charge removing trick. I have also removed the hard disk put it back again, but did not work either.  Please help.










Solved!
Go to Solution.

A:Thinkpad T400 not booting, lights below the screen...

Solved the problem myself. Removed the internal battery and reinstalled it after 30 s. It worked perfectly. Typing from it now.  

Read other 1 answers
RELEVANCY SCORE 59.6

Hello Dears, I have updated my BIOS via Lenovo BIOS updater and everything went successfully and it asked me to restart your computer after updating BIOS and now I do not get any display , I have waited for like 10-15 min to see if i can see anything and i saw it booted and i have updated my drivers for win 7 ultimate and upon restart again i dont have any display and i am waiting 20 more to see if i get anything .  Anyone else face the same problem here after updating BIOS? What should I do guys next, I still have the warranty left? Does updating BIOS remove the warranty?thanks in advance for your advise regardsJan













Solved!

Go to Solution.

A:Thinkpad T400 No display after BIOS update

updating bios did not affect warranty. call for service

Read other 8 answers
RELEVANCY SCORE 59.6

I have a T400 ThinkPad upgraded to Windows 10 that suddenly had a blank screen and no lights except for wifi.On closer inspection I discovered the backlight is not lit during startup, whilst ThinkPad splash and window symbol are displayed but then, screen goes blank and then I hear the windows startup sound.Displays perfectly on an external monitor. I have replaced inverter, lcd cable and screen .... nothing works! I'm not sure if I should just resell the parts I bought and get another laptop .... can I transfer Windows 10 to another machine or is there another fix I could try? I don't have much money.Any help appreciated.

Read other answers
RELEVANCY SCORE 59.6

Hi everyone. I've a problem with mi Lenovo ThinkPad T400. The brightness is always at the minimum, and cannot be changed. But it is like when you close the laptop and the screens turns off, it is almost like that, I need a lantern to see what appears in the laptop, but besides that everything else works fine. If I connect it to an external monitor, then there is no problem, but you know, I don't wanna carry an external monitor with the laptop. Do you know how to deal with this? Thanks in advance!

Read other answers
RELEVANCY SCORE 59.6

It all started when I installed Win 7 after a Linux usage for a couple of months. First I thought it was uTorrent that screwed it up so I removed it but it still gave BSODs at least once a day. Haven't had the energy to do anything about it until now so now I'm asking you guys for advice how to get rid of it.
I have activated minidump in Control Panel > System > Advanced System Settings > Setting in Startup and Recovery > Small memory dump (256KB) under System failure.
Got a BSOD a couple of minutes ago but I didn't get a minidump output from it.

Attached the four debug reports I got from SF Diagnostic Tool.

Appreciate any help I can get,
Johan

A:Thinkpad T400 Elite. Get BSODs all the time

Can0n, welcome to SF. Please fill out detailed System Specs, found in your lower left corner.

Then, follow these instructions:

http://www.sevenforums.com/crashes-d...tructions.html

Read other 3 answers
RELEVANCY SCORE 59.6

I have a IBM T400 Thinkpad win 7 32 bit pro OS and the taskbar just recently started flickering in "heartbeat" type of rhythm. I have updated the display drivers as the only solution I have been able to glean from this forum and the internet. The driver update has not worked to date.

I would appreciate any other suggestions to fix this issue

TIA
jinx
 

A:Flickering Taskbar IBM T400 Thinkpad Win 7 32bit pro

Is anything else flickering besides the taskbar?i also have a t400 but mine is running windows xp pro with no problems. it might be that the graphics or video cards have a problem or the laptop screen itself might be the culprit.you might want to have it checked out to see what the actual problem is and then go from there.
 

Read other 3 answers
RELEVANCY SCORE 59.6

Hi all -I know I am talking about a very old machine but I am hoping there is someone out there that would be willing and able to provide helpful  advice - some background -  in my dire need I purchased a 'refurb' Lenovo Thinkpad T400 from who now turns out to be an unreputable seller - I was silly enough not to worry about recovery disks or even a 30 day warranty - now I am paying dearly for my negligence.  This machine has had issues from day one that I thought I could work my way thru reading forums, Lenovo site etc. but nothing has worked.  My first challenge was trying to just get the right-click on touchpad to produce context menu - I searched and searched and reluctantly loaded 3rd party softwares to no avail.  I gave up on that only to discovered that when I loaded any antimalware program my cursor would not open that program nor would it open any other program on the machine. So I uninstalled the antimalware. So I can't really run to see if I have a virus.  To make a long story short right now NONE of the function keys work nor the THINKVANTAGE.  When I reboot and attempt to go to safe mode, bios utility I get nothing except opening up windows where sometimes the cursor will open a program or not and the trying to open programs from the start menu or the task bar is hit or miss same happens in the start menu and trying to open a browser.  I am running on Windows 7 Pro 64-bit and would like to go back to factory settings, but ag... Read more

Read other answers
RELEVANCY SCORE 59.2

The T400 that I have will start but will go no further then the first screen.It sets at the screen that says Thinkpad and at the bottom of that that ssays to interrupt normal startup press the blue ThinkVantage button will not go any further. Just stops there.
 
 
Moderator comment: New thread created. Subject edited for clarity. Was: Re: T400 will not boot, any help from the masters?

A:T400 boot hangs at ThinkPad splash screen

@garyoverton,Does the hard drive light stay lit at that screen?

Read other 3 answers
RELEVANCY SCORE 59.2

Hello,  My thinkpad's display isn't working, not are any of the status lights except the wifi one. A few things you should know about my ThinkPadSSD UpgradeBIG ONE: WAS drenched in water, did not turn on. I took it apart, dried it out, and put it back. It worked fine.Faulty CD Drive (randomly pops out, but recently is behaving itself)LCD Ribbon cable (connector cable) changed once for the same problem, but it's happening again now.RAM upgraded to 8 gigsRecently, like two days ago, a startup interrupt menu keeps showing up. No keys were pressed upon startup, but it still shows up. Windows 7 ProHinges are loose, display wobbles back and forth quite a bit.I would appreciate it if someone could point me in the right direction, I dont wanna keep buying ribbon cables!  Thank You!-Matt

Read other answers
RELEVANCY SCORE 59.2

Hi,

I have a T400 which has the following two display adapters:

ATI Mobility Radeon HD 3400 Series
Mobile Intel(R) 45 Express Chipset Family

After installing Windows 7 and checking device manager, the ATI adapter does show up under the "Display adapters' section, but it has a ! sign on it, and if I click for details, it says:

This device cannot start. (Code 10)

I tried downoading and installing this:

Lenovo Support & downloads - ThinkPad Switchable Graphics Driver for Windows Vista 32bit and 64bit - ThinkPad T400, R400, T500, W500

and when I rebooted, it went through some diagnostic tests in a cmd window to finish installation. But when I checked the device manager again, the ATI adapter still says it cannot start.

I also tried this:

ATI Catalyst? Mobility Display Driver

which I got to by selecting W7 32-bit > Mobility Radeon > Mobility Radeon HD 3000 series.

It seemed to install OK, but I got a message which I've gotten with previous attempts, which says:

"The Catalyst Control Center is not supported by the driver version of your enambled graphics adapter. Please update your ATI graphics driver, or enable your ATI adapter using the Displays manager."

I went to the device manager, right-clicked on the ATI adapter and did Update Driver, and it did at first find a better match but said it couldn't be installed with the same error message from above (Code 10). Now, when I try to update the driver again, it says... Read more

A:W7 and ThinkPad T400 ATI Radeon 3400 series driver

I am also running a Thinkpad T400 with an ATI Radeon HD 3400 Series with Windows 7 32 bit. I cannot uninstall the current driver (8.56.1.13) nor can I update using the ATI driver package.

Any help would be greatly appreciated!

Read other 9 answers
RELEVANCY SCORE 59.2

The machine stops at the ThinkPad screen. I have replaced the RAM but no luck. I have not the removed the CMOS battery. Any clue what my next step should be?













Solved!

Go to Solution.

A:T400 starts ThinkPad screen then stops - 6475

It was a problem with one USB port. https://forums.lenovo.com/t5/ThinkPad-L-R-and-SL-series/ThinkPad-hangs-on-boot-stuck-at-Thinkpad-scr...

Read other 1 answers
RELEVANCY SCORE 57.6

 Dear Moderator(s) I am having boot up warning with the current Bios that is recently updated in February 2017. This machine dual boots with Windows 10 and Ubuntu 16.04.2.  I am facing error and warning message from the Bios which can only be fixed by Lenovo Inc. Please review the bug and error messages below.  The bug is as follows:[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150930/tbfadt-623)[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704) The ACPI error is as follows:[ 1.978280] ACPI Error: Field [TBF3] at 294912 exceeds Buffer [NULL] size 262144 (bits) (20150930/dsopcode-236)[ 1.978287] ACPI Error: Method parse/execution failed [\_SB.PCI0.VID.GETB] (Node ffff8801570b1960), AE_AML_BUFFER_LIMIT (20150930/psparse-542)[ 1.978296] ACPI Error: Method parse/execution failed [\_SB.PCI0.VID.ATRM] (Node ffff8801570b1938), AE_AML_BUFFER_LIMIT (20150930/psparse-542)[ 1.978304] failed to evaluate ATRM got AE_AML_BUFFER_LIMIT I am not certain if it affects the normal shut down. Even though i can use magic sysrq key to shutdown safely, it is a hassle to do so. Thank you for your kind assistance in issuing new update to the Bios for T400.   

Read other answers
RELEVANCY SCORE 57.6

First, my t400 would only boot with power cord unplugged. Then it stopped booting altogether. I read to press the power button 10 times and hold it on the tenth time and to unscrew the palm rest to unplug the little battery for 30 seconds. That is the only way I can get it to boot now. I picked up a new regular battery today thinking it might be related but that hasn't solved it. Any ideas?
 

A:thinkpad t400 wont boot w/o reseting little battery behind palm rest

I looked at it closer and to get it to start i don't press the power button at all. I unplug the power cord and after unplugging the CMOS battery for awhile i just plug the power cord back in and it starts up. The first thing i see as it starts up is an error message about a bad CMOS checksum and then i have to change the date/time in the BIOS or it yells at me to do it. After all that it boots into windows 7. Once it is in windows no matter what i do to change the settings of what the power button does it still doesn't do anything. I can restart it fine but once i shut it down it the CMOS battery needs to be reset to get it going again.
 

Read other 3 answers
RELEVANCY SCORE 56.4

I know I am behind the times using a Thinkpad T400 with Windows 7 Pro 64-bit but I am having a heck of a time using  this machine as it constantly freezes up.  I tried running the diagnostics and it failed on the SMART tests and did not complete the remainder of the tests ie video card, etc.  The final result code was:W1UKDVUB5-QE4MD9 Does anybody know what this code means - how much trouble am I in and why is this machine freezing up all the time? Thanks for any thoughts or assistance. Lorelei

Read other answers
RELEVANCY SCORE 56.4

When opened fully (at right angle) the screen is blank. I can initially see a very dim Thinkpad logo on boot but nothing else, no BIOS, grub or luks screens. Also during this time the bluetooth LED on the inverter is on. The thinklight still works as does external display: If I move the screen down towards the keyboard the display comes on and I can see the screen as normal and other inverter lights come on such as the battery light.WHILE DISPLAY IS DOWN IN KEYBOARD   PLEASE ANY ONE SUGGENST ME WHAT SHOULD I DO?    

Read other answers
RELEVANCY SCORE 48.8

My  Lenovo 110 had good volume from the internal speaker when I bought it a little over a year ago. After a month or so, it became scarcely audible. I sent it in for warranty repair, and after about a month, it came back working as it should. About six months ago, the volume became a whisper again and I have been trying to find out how to set it right. I have been through all the online suggestions to change various settings and mess with drivers etc. I have found that this is a common issue with Lenovo laptops, but I can't think it's the hardware as much as the software. Does anybody know of an actual fix for this issue. It's very annoying. I was in the habit of buying refurbished laptops after I spilled milk and cereal or Mountain Dew in the keyboards or had a screen go bad. Never had this issue with a used machine. I bought this, my first new one, to get the  absolute extended warranty, but I don't want to have it gone for another month to get its voice back, only to lose it again. I need to know if its laryngitis can be cured in the software or settings. Thanks.

Read other answers
RELEVANCY SCORE 47.2

You can change the volume in software, but neither the volume +- on the keyboard, nor the volume rocker on the side of the machine will change the volume. That is, UNLESS you open the task manager, and then click on the services tab. As long as the focus is on the services tab, then the volume on the keyboard and the rocker will both work. If you click on another window, or if you click on a tab other than the services tab, both sets of buttons stop working. Also, both sets of buttons work fine in Linux.

Read other answers
RELEVANCY SCORE 47.2

You can change the volume in software, but neither the volume +- on the keyboard, nor the volume rocker on the side of the machine will change the volume. That is, UNLESS you open the task manager, and then click on the services tab. As long as the focus is on the services tab, then the volume on the keyboard and the rocker will both work. If you click on another window, or if you click on a tab other than the services tab, both sets of buttons stop working. Also, both sets of buttons work fine in Linux.

Read other answers
RELEVANCY SCORE 46.8

Hi, I'm having problems with the Unmountable Boot Volume error and the "Blue Screen of Death".
So I had a trojan virus and it spiraled into something completely horrible!
I don't have the Windows XP CD, or at least I don't think I do. I found a packet for Windows XP that has a bunch of discs that say Windows XP Developer, Windows XP Update, Windows XP media center, etc.
Everything I do it goes to the blue screen. If I go to safe mode, it goes to a blue screen. If I start it normally > blue screen. I try to to do the ThinkVantage button(I've an IBM Thinkpad) > blue screen.
Now, all I can do is get into the BIOS. but from there I don't know what to do.

I don't have any discs, floppy discs, etc.
I can download something onto a USB. That's about it, but I really a lot need help.
 

A:Unmountable Volume Boot, a blue screen and an IBM Thinkpad -- HELP

A search at Microsoft Knowledge base site found this; http://support.microsoft.com/kb/555302 , and this one may help also here,http://support.microsoft.com/kb/315403, http://www.geekstogo.com/forum/topic/43519-windows-xp-blue-screen-of-death-stop-codes/ , then scroll way down to that error you get. These articles causes and solutions do apply only to a IDE older type hard drives, so if your drive is a serial ATA, (SATA), then other searches are needed.
 

Read other 1 answers
RELEVANCY SCORE 46.8

I have a Thinkpad Yoga S1 and I was wondering how I can disable the volume rocker on the side of the system. I still want to be able to use the volume controls on the keyboard, but sometimes I accidentally press them and sometimes they get stuck so I want to just turn them off. How do I do this?Thanks.

A:Disable Volume Rocker on the side of Thinkpad Yoga...

I have the Yoga X1, and I have the same problem.  I keep mine verticle in a sleeve in my backpack, but these buttons are on the opposite side of the power port, so they face down and frequently get pressed due to gravity, which wakes the computer, which then runs down the battery and super heats up the unit while not being used in my backpack.  They also seem to somehow start the music player.  Anyway, there must be a registry key to disable them if Lenovo didn't have the foresight to put in an option to control/reprogram them.  Hopefully somebody knowledgible will respond.

Read other 1 answers
RELEVANCY SCORE 46

Hi everyone, I bought a Lenovo ThinkPad P50 Signature Edition with a 4K matte display. Over time, I noticed that my display got laggier and laggier at full 4K resolution. If I lower my display resolution to 1920x1080, my display is fairly smooth. I'm not sure why my display isn't smooth at full resolution. I also noticed yesterday that my volume hotkey buttons above the full keypad don't work properly. My volume hot keys above my keyboard work fine, however. Is there any way to alleviate or fix these two issues?

Read other answers
RELEVANCY SCORE 45.6

I recently upgraded my W700 to a clean Win7 Pro x64 install, downloaded the latest Win7 drivers from the Lenovo website, and did a manual install of all of them. Mostly there were no problems, however the OSD for mute, volume up/down, and brightness did not work. Here is the page for the Hotkey Features Integration package, which contains the OSD program: Hotkey Features Integration for Windows 8 (32-bit, 64-bit), 7 (32-bit, 64-bit), Vista (32-bit, 64-bi... The problem appears to be a bug in latest version of the OSD program, for the W700. I collected data on the various versions of the OSD utility; see below (I have used the overall package version as a reference, although the OSD program itself has a different version). Here is the fix: 1) Install the latest Hotkey Features Integration package. This gets the latest other packages, plus a broken version of OSD.2) Manually uninstall the OSD program (in Control Panel:Uninstall); reboot.3) Download and install the Hotkey Features Integration package version 3.85.0000. This is last version which works fully with the W700. Run the package installer, the run the installer itself. Make sure that only the OSD component is selected; run setup; reboot. That should fix it. It appears that the bug also exists in Win XP. Here is the info I have on the various versions: 3.33.0002 - OSD Works with W7003.81.0100 - OSD Works with W7003.84.2000 - OSD Works with W7003.85.0000 - OSD Works with W700 <&l... Read more

Read other answers
RELEVANCY SCORE 42

I'm not sure if this happened with 5.55, but with 5.56, when I hit the volume up or down on my keyboard to turn the sound down for everything, it turns down winamp's volume bar too. Sometimes I can move winamp's volume bar up and down and it won't even be working. What causes this? It's pretty annoying for the music to turn down twice as fast or winamp's volume bar to not even work at all.EDIT: Moved to a more appropriate forum

A:Volume keys turning down computer volume and winamp volume at the same time?

Bump

Read other 4 answers
RELEVANCY SCORE 41.2

Encrypted Volume Check: Volume Info on \\?\Volume{X}Can Not Read

Found this in my Event Viewer on each start/restart. I don't have any Volumes that I have encrypted. Is this malware? I've run everything prior to noticing including Windows Offline Defender.
Not sure if this is even the correct area to post this!
Glenn

A:Encrypted Volume Check: Volume Info on \\?\Volume{X}Can't read

I'm going to take a guess, please upload a screenshot of the disk manager (Windows Key+R to open the Run dialog, type diskmgmt.msc, and press Enter).
Posting the actual entry from the Event Viewer can help.

Read other 9 answers
RELEVANCY SCORE 37.6

Hello.I have just bought a used thinkpad T400,and am finding it a bit slow,I use both Chrome and Firefox.The writing is not very clear at all,it appears in a kind of broken fashion.Also the cursor is not very responsive,and sticking at times.Can anyone advise me if there is anything i can do about it please.I see there is no SD card slot either.How do i get photo's onto it.I am a real novice,and would appreciate a step by step response.Thank you. Mick.

A:t400 questions

What operating system is your T400 running on? Seeing that it is a considerably old laptop, one can expect it to run quite slow. If you want decent performance you'll want something at least an i5 processor, an SSD drive, and 4GB of Ram. If the writing is not clear to you it is probably because it has a low resolution display. Not a whole lot you can do to change this. If the cursor is choppy. Your best bet is to get the latest drivers. Try downloading them here https://pcsupport.lenovo.com/us/en/downloads/migr-66898 To get photos from an SD card onto it, you could get a SD card reader to USB adapter. In reality though, you might be better off just buying a different machine altogether.  

Read other 1 answers
RELEVANCY SCORE 37.6

So, I am working on building my sister a new laptop, for the task I have picked a Thinkpad T400, I bought this laptop for Ģ40 off ebay and am very happy with the conditions of it, it came with an Intel P8400, 1GB of RAM and no HDD, this is fine as i have ordered a T9900, which it yet to arrive, a 250GB 850 EVO, and i planned to use the 8GB 1333 DDR3 kit out of her old laptop, this consists of two 4GB modules and are 1.35V, now the problem is that the thinkpad will refuse to boot with any of these modules, not even if one is installed, it simply throws the RAM issue post code and does not start up, i am curently running the latest bios available however it is simply not working, sadly it looks like i am going to have to purchase new RAM but I am not sure what to purchase as corsair apparentsly have issues with the T400 and Crucial recommend 1600mhz DDR3L (1.35V) so i am not sure if this will work, could you let me known of known working memory, why is the current memory not working and will the crucial reccomended stuff work? 

Read other answers
RELEVANCY SCORE 37.6

How big HDD Lenovo T400 can supported? Can handle over 1-3TB HDD?

Read other answers
RELEVANCY SCORE 37.6

Hello,I have a Thinkpad T400, bought it brand new in 2008, fully optioned with a t9600 processor. I've since then removed the obsolete Vista x64 and replaced it with Win7 x64. Replaced 7200 160gb hdd with Intel 160gb SSD. Upgraded 4GB of RAM to 8GB of RAM. The problem I am having is random overheating. Every once in a while it will just shut down, I've taken a infrared thermometer to the bottom of the unit and measured ~163 F surface temps!!I've had TPFanControl installed since the vista days (my warranty had just expired by then), as I had experienced some overheating issues.  I installed Windows 7 and it seemed to run much cooler...but recently I am having issues again.TPFanControl shows 62C and dropping at the moment (now it's 59C), but it was reading 73C+ before I switched fan control to manual. The fan speed is now at 3422RPM instead of the ~2000RPM it was reading before (at 73C). It seems to run sluggish....I'm sure 70C+ temps aren't normal, right? Compared to my home built six core AMD system, which idles around 35C...About a year ago I took the keyboard off and blew out the dust....seemed to help a little. Also made sure the heat sink screws were tight. My next option seems to be taking the heatsink off and apply some arctic silver paste. Curious to see what others have experienced...This is my first Thinkpad...I was always told they were rock solid. This one has been quite flaky.





________________________________________X230 - I... Read more

A:T400 Overheating!?!

Wow...I just found out about "127" in TPFC....so the CPU fan can go up to 4800RPM it would seem....cpu is cooling down nicely...I have NEVER heard the fan goes this fast before....





________________________________________X230 - Intel Core i7-3520M - 16GB - 256G SSDT400 - Intel Core 2 Duo T9600 - 8GB - 160GB SSDT43 - Intel Pentium M 750 - 2GB - 100GB HDD

Read other 9 answers
RELEVANCY SCORE 37.6

Hello, I am looking for a new battery for my T400.I see  7800mAh battery but the seller does mention it is for 14.1 widescreen.The product id 6475OP1G for my T400 is this a widescreen?The battery wich is fitted now FRU P/N 42T4653 Thanks in advance Mario

Read other answers
RELEVANCY SCORE 37.6

Hi all --  Longish post, need help, please read! Recently my T400 has been creating significant heat under load. After combing through a number of T400 heat issue posts I decided it was likely some combination of too much dust and insufficient thermal grease. So, I poured over the hardware maintenance manual (HMM)... I disassembled the system, extracted and cleaned the fan, removed existing thermal grease off the CPU, GPU and Southbridge, reapplied Arctic Silver 5, reinserted the fan and reassembled the system. Everything seemingly worked well. System booted without issue and the temperature difference was noticeable (TPFancontrol said so, anyway). To test the machine I decided to put the system under some significant load -- a few crazy calculations in Excel. It chugged away for about 10 minutes and then... BEEP BEEPrebootFAN ERROR My resposne: FML. But I can deal with a little adversity; so back to the forums and the HMM. All signs pointed to replace fan. And so I did -- ordered a new fan yesterday knowing full well there was no way to restock it because they don't take returns... and the $100 this part cost isn't exactly chump change. (Note, I find it highly unlikely the FAN is worth 1/15 of what my original machine cost me). I digress... A new fan arrived an hour ago (at least the parts counter is efficient) and I replaced the old fan. I'll be frank, I didn't replace the thermal grease -- the new fan assembly had plenty... I re... Read more

A:T400 FAN ERROR

The grease that comes with the fan is fine. It is at least as good as what you buy and it is applied better than you can. My guess is that there is a blown fuse (F4) on the motherboard, but it is hard to diagnose from 3000 miles away. Lenovo does not replace fuses. It requires a good soldering station - not a simple soldering iron. They just swap motherboards. Make sure that the fan spins freely and is plugged in correctly. Antenna wires can get in the way if they are not run properly. If you don't want to fix, I would discuss an exchange, but that should be done through private messages.

Read other 9 answers
RELEVANCY SCORE 37.6

I went to sleep last night after setting my T400 thinkpad into sleep mode, and I woke up in the morning to 'un-sleep' it and it flashed all the little icons on the little status tray below the screen before they all turned off and nothing happened. I tried to unplug the laptop (Having plugged it in when I woke up) and got the same results minus the 'plugged-in' status light blinking. I tried it without the battery in (but plugged in) and it happened again. I'm not sure what else I can do, because I can't even get the computer to even start up. I would love to have the problem resolved. Thanks in advance for the help.

A:T400 not powering on

Try removing both the power and the battery and holding the power switch down for 10-30 seconds. (more is better since I don't remember the exact number).  Put the battery and power back on and try powering it up.  If this doesn't work you can try removing the palmrest and pulling the cmos battery as well.. here's to hoping the first idea works..  Best of luck!




Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 10 | ATI Catalyst 13.1 (non-switchable)Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Read other 9 answers
RELEVANCY SCORE 37.6

Need guidance on finding drivers for T400 running WinXP.  I know XP is "obsolete" (by virtue of vendors saying so) but the laptop is in fantastic shape and very, very stable.  Just need to undo tweaks that didn't produce the intended effect, so now I'm looking for drivers to get the powermanager, fingerprint reader and PCI simple communications back working.  Lenovo seems to have pulled those from the website.  Following their links leads to a sever error.  Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 37.6

So I needed my whole hard drive, so I wiped my T400 and did a fresh install of Vista without the bloatware. I downloaded all the drivers, got everything to work, but there's one driver I can't seem to figure out what it is. It's labeled as "Simple PCI Communications Device" - but I already have my ethernet port, wireless, bluetooth, and modem installed and all working. So what other communication device could this be? Moderator note: Type added to subject line for clarity. Itīll help us, to help you. Message Edited by Agotthelf on 19-05-2009 10:20 PM





_______________________________________________________T400 6474-11U, Vista Business 32-bit, Core2 Duo P8400, 4GB DDR3, 160GB HD

A:T400: Drivers?

number65, welcome to the forum, it would be helpful if you could post which T400 you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about the ThinkPad. Please do NOT post your s/n.  Thanks

Read other 7 answers
RELEVANCY SCORE 37.6

I have a T400 Type 2767-H9U Product ID: 2767H9U. What version of Windows did it originally come with? 32 or 64 bit? The COA sticker is worn I can see neither the Windows nor the key sequence. How do I obtain the key? The computer does not boot up.Thanks,Dan

Read other answers
RELEVANCY SCORE 37.6

Why is there an SDcard slot in my T400 battery bay? What is it used for? Thanx!

Read other answers
RELEVANCY SCORE 37.6

I have a large battery on my T400 as I was using the machine for many hours away from AC, that problem is not what it used to be but I was wondering which is the best option for a battery tht fits flush to the machine?  

Read other answers
RELEVANCY SCORE 37.6

I have a problem with the right side USB on my T400, obviously a pain the butt so in the service manual section 1180 covers the disection to get at the USB sub assembly, almost literally have to take the machine completly apart I have the PCMCIA/Express Card version which is adequate for my needs. I have a USB 3.0 card installed in the top slot. no pain, no gain, so is the USB sub assembly fixable, USB shows a device error suggesting a signal problem and I wonder if there is a problem with the logic board as opposed to a damaged port  

Read other answers