Over 1 million tech questions and answers.

Several BSOD after unplugging USB mouse.

Q: Several BSOD after unplugging USB mouse.

EDIT:uploaded correct zip
My problems all started a few days ago after inadvertently unplugging my mouse from the computer. Since then I have had a handful of bsod.
I have run memtest and it came back negative. I have also run chkdsk. This is the result of that test
Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
141568 file records processed. File verification completed.
1976 large file records processed. 0 bad file records processed. 2 EA records processed. 60 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
194782 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
141568 file SDs/SIDs processed. Cleaning up 897 unused index entries from index $SII of file 0x9.
Cleaning up 897 unused index entries from index $SDH of file 0x9.
Cleaning up 897 unused security descriptors.
Security descriptor verification completed.
26608 data files processed. CHKDSK is verifying Usn Journal...
33881840 USN bytes processed. Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
141552 files processed. File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
226327968 free clusters processed. Free space verification is complete.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Windows has made corrections to the file system.

976657407 KB total disk space.
71006076 KB in 111272 files.
67712 KB in 26609 indexes.
0 KB in bad sectors.
271743 KB in use by the system.
65536 KB occupied by the log file.
905311876 KB available on disk.

4096 bytes in each allocation unit.
244164351 total allocation units on disk.
226327969 allocation units available on disk.

Internal Info:
00 29 02 00 a4 1a 02 00 95 fd 03 00 00 00 00 00 .)..............
dc 01 00 00 3c 00 00 00 00 00 00 00 00 00 00 00 ....<...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Windows has finished checking your disk.
Please wait while your computer restarts.
I also ran the WD HD test utility and the drives have come back fine. I also have stress tested the video card without it failing.

I have already removed all epson drivers from system and reg. I also deleted and let windows re install the usb drivers.
Thanks for your help.

RELEVANCY SCORE 200
Preferred Solution: Several BSOD after unplugging USB mouse.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Several BSOD after unplugging USB mouse.

AVG IDS Application Activity Monitor Driver is causing the BSODs here.

Code:
fffff880`06f994c8 fffff880`02d6261aUnable to load image avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
avgidsdrivera+0x1861a
Description here: Driver Reference Table - avgidsdrivera.sys

Uninstall AVG using AVG Remover. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Do some Disc checks.
Reseat the sata and power.

Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Post screenshot of HDDs using CrystalDiskInfo - Software - Crystal Dew World
Let us know the results.
___________________________________________________________________________
BSOD ANALYSIS:

Code:
BugCheck 3B, {c0000005, fffff80003745552, fffff88006f99770, 0}

Probably caused by : ntkrnlmp.exe ( nt!CmpKcbCacheLookup+492 )

Followup: MachineOwner
---------------------------------------------------------------------------
BugCheck 1A, {782, fffffa8003752c10, fffff9801ec00000, fffff8a00028c190}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2b4a9 )

Followup: MachineOwner
---------

Read other 1 answers
RELEVANCY SCORE 72.4

Hi, I have been using my laptop with windows 7 installed for a while. Whenever I unplug my USB mouse, I receive a blue screen and windows says that it will restart.

I have the dump file, and I can attach it to this post.

Thanks for everyone's help.

A:BSOD unplugging USB mouse

There is a lot of info missing needed to analyse your issue:

Please follow these instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 8 answers
RELEVANCY SCORE 70.8

I've been dealing with this problem for a while now and just googled it but the fix I saw was for Vista 64bit and I'm not sure if it'll work for the 32bit as well.

Basically I unplug my USB mouse (I usually turn off my screen too) and within minutes my comp has blue screened. The Vista 64bit fix just said remove the update KB973879 but when I searched my updates I couldn't find that.

Thanks for any help with this

A:Unplugging USB mouse causes BSOD (Vista 32bit)

Welcome
For the best help, please post this information. I will look at it, shortly, after I return home
Blue Screen of Death (BSOD) Posting Instructions

Read other 4 answers
RELEVANCY SCORE 70.8

Hi,

Since some days I have a problem on my computer. A BSOD appears whenever I want to remove my mouse, or uninstall its driver (I thought maybe it could help), or even disabling the mouse.

Can you help me ? I ran "DM log collector v1.3" before posting this.
Here it is : DRAGONCYBORGPC-06_03_2015_190845,58.zip

I tried everything I could think of but it doesn't seem enough to solve the problem.
By the way, my mouse is a "Saitek Cyborg R.A.T 7", bought in 2010.

Thank you for your help.

Best regards,
Geoffrey R.

A:BSOD when unplugging usb mouse, or trying uninstall driver

Disable all startup items. Your Intel Mouse driver is the culprit: Driver Reference Table - imsevent.sys
Uninstall Asus bloatware from your system.
Uninstall TAP-Win32 Adapter V9 or OpenVPN driver or COMODO whichever you have.
Disable nVidia Streaming Kernel Service in services.msc

Code:
tmpE908.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmpE908.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8894.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8894.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8AFA.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8AFA.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8F20.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8F20.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

tmp8BE5.tmp Sat Jul 26 15:29:37 2008 (488B26C1)

tmp8BE5.tmp - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

npf.sys Fri Jun 25 18:50:58 2010 (4C24DE72)

npf.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is ... Read more

Read other 22 answers
RELEVANCY SCORE 70.8

Computer crashes when unplugging my mouse, Steelseries Kinzu V2, usually when Google Chrome is open. I recently reset windows and the problem did not show up for a few days but now it crashes. The info from the diagnostic tool is attached. My guess is that some driver is causing issues with chrome.

SUJAYMB-Mon_08_29_2016_200749_60.zip

Read other answers
RELEVANCY SCORE 57.6

I just got a dell inspiron with windows vista home premium 64bit on it. I'm finding that when i unplug my usb mouse i get a blue screen/memory dump followed by shuting down. I saw some similair threads on the forum when looking for an answer, and the answer i found was to use the 'unplug device' icon in the bottom right corner. But the problem i have with this, is there is no icon there, i click the arrow to see the rest and still not there. Do i need to turn off my laptop everytime before unplugging mouse, or did i miss something? If further information is needed just let me know

A:blue screen when unplugging usb mouse

I have fixed this on my laptop doing the same as I posted on the dell website: Studio 14z: BSOD whenever i unplug USB - DELL COMMUNITY
Uninstall windows updates with the following Knowledge Base numbers (I haven't figured out which one is doing it quite yet)

KB972036
KB973879
restart the computer, log in and test.

Good luck!

Read other 4 answers
RELEVANCY SCORE 57.2

Hi. I have problem with my mouse and keyboard, they are unplugging. I read many tutorials here, but nothing helped me. Mouse and keyboard are randomly unplugging and plugging, but after this they are unplugging and I must restart computer. Its ridiculous because usb headphones are working. Problem started when I had Windows 8.1, after I formated to 7, now I have 10, and problem is still. I tried some other mouses and keyboards, but didn't helped. I changed some hardware, but didnt helped too. I found something strange. My standard mouse and keyboard are turning off and I must restart computer, but new set is unplugging and plugging sometimes before turn off. Help me please (sorry for my english)

My pc:
cpu: i7 2600k with box cooler
mobo: Asus Maximus IV Extreme-z (before I had ASRock p67 pro3 b3)
gpu: Gtx 660 Msi (before Radeon R7 260x oc)
hdd: Seagate ST1000DM003 and Seagate ST500DM002
psu: Thermaltake smart se 530w (before chieftec gpa-500s8)
case: SilentiumPc gladius 800
ram: 6gb - 2x2gb samsung 1x2gb kingston
 

A:Win7/8.1/10 Mouse and keyboard is unplugging and plugging

Have you made sure that you have the latest drivers for your motherboard? Also what keyboard and mouse? And are you getting any notification on screen when they disconnect?
 

Read other 2 answers
RELEVANCY SCORE 52

Hello
I am using windows 7 64bit system.
for some reason, after im unpluging my TP-LINK usb device, a BSOD appears
it happens every time im doing it.
(TP LINK WN821N v3)

i have to say it happens only with the TP LINK device, if im unplugging the mouse/keyboard USB
everything is ok...

*added dm log collector info

thanks!

A:BSOD after unplugging USB(TP link)

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_YONI-PC-Wed_12_24_2014_181604_53.zip\122114-33602-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02c53000 PsLoadedModuleList = 0xfffff800`02e96890
Debug session time: Sun Dec 21 12:38:21.238 2014 (UTC - 5:00)
System Uptime: 0 days 0:22:05.051
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
......
Unable to load image \SystemRoot\system32\DRIVERS\athurx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 52

Hi all, I've been having this weird problem and this site looked like a good place to ask about it because of the support I've seen. So wooooo first post~!
Anyway, whenever I unplug one certain flash drive (a Kingston DataTraveller SE9) my laptop bluescreens with the error "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED". I can't figure out why for the life of me! I did, however, figure out that the flash drive is recognized as a local disk and not a removable one. This issue only applies to my laptop, that's it; the drive works perfectly fine on any other computer. I can still read and write to it no problem. Any help at all would be greatly appreciated!

A:Unplugging Certain USB Drive Causes BSOD

Some USB flash drives act like a hard drive which Windows lists as local disk instead of removable. You will notice that when you delete anything on the USB drive labeled local the deleted items go to the recycle bin. On a USB flash drive labeled removable the items are not sent to the recycle bin.
 
Download USBdeview. Run the program Highlight any listing for Kingston DataTravler and press the red X to remove. Reboot the computer and attach the Kingston again. Do you get the error?
 
http://www.nirsoft.net/utils/usb_devices_view.html

Read other 2 answers
RELEVANCY SCORE 52

It's the weirdest thing.. If I disconnect the ethernet plug from the computer, it will blue screen. Every time.

Based on the blue screen info and the searches I have done on the error, it seems there is something wrong with the Nvidia drivers? I have went to every resource I could to make sure all drivers are up to date.. but nothing seems to be working.

I have been trying to troubleshoot this for a while.. but I kept giving up. I am turning to the fourms for help since I can come up with no solution.

Here are the computer specs - required files are attached. Please let me know if I need to provide anything else. Thanks in advance!

Specs
- Installed: Windows 7 Home Premium 64-bit
- Originally: Windows Vista 64-bit
- Windows Vista came on the system, but it came with free Windows 7 upgrade discs, so it was upgraded.

- System is just over 2 years old
- Windows 7 installed just over a year ago

A:BSOD when unplugging ethernet

Your attachment does not include the crash reports. It only includes the executable for getting the crash reports. Please follow the http://www.sevenforums.com/crashes-d...tructions.html closer to supply us with the correct files so we may better assist you. Thank you.

Read other 5 answers
RELEVANCY SCORE 51.6

Been posting my problem in somebody's closed thread. My bad.

So, here my problem in my very own new thread.

PC slows down, then locks up, then does the BSOD thing. Sometimes with very few things open. (email and a magazine reader) Sometimes with lots of things open. (powerpoint, email, Bible study software, video editor, youtube downloader, etc)

If I've done it right, the zipped dump file is attached.

Here are the system specs.CPU: Intel Core i7-2600K CPU @ 3.4GHz
Motherboard: ASUS TeK Computer INC. P8P67 PRO
BIOS: BIOS Date: 02/05/10 19:13:52 Ver: 08.00.10
Total Memory: 16.00 GB Usable 15.98 GB
HDD: (1)OCZ-VERTEX3 (2)SAMSUBG HD204UI (3)HP Photosmart 8200 USB Device (4)Lexar Jump Drive (5)Seagate FreeAgent GoFlex (6)WD My Book 1140 USB Device (7)WD My Book 1140 USB Device
Sound Card: (1)Realtek High Definition Audio (2) USB Audio Device (3, 4, 5 and 7)NVIDIA High Definition Audio (6)Dazzle DVC100 Audio Device
Graphics Card: NVIDIA GeForce GTX 560Ti
OS: Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
Thanks for help.

A:Can only recover from BSOD by unplugging all USB devices

There are no dump files in your upload mate, they will be located in C:\windows\minidump folder have a look
Check this out Dump Files - Configure Windows to Create on BSOD

Read other 9 answers
RELEVANCY SCORE 51.6

I recently started playing WoW again after almost a year, and now my computer has suddenly started getting bluescreens when I play. It has also sometimes got bluescreens when I unplug my Line 6 UX2 soundcard, which has been going on for a while. I have never got bluescreens when I play WoW until now. So I would like to get some help analyzing what's wrong. My computer has also since I installed this version of Windows 7 occasionally shut down or rebooted randomly without even giving me a bluescreen. I don't know if this can be fixed, but if you can help me with that too, it would be great.

I've got Windows 7 Home Premium 32-bit. It's not the original OS installed on my computer, I used Windows XP Professional 32-bit as my first OS and then the Windows 7 Beta before upgrading to this version. It's an OEM-version, I got it installed with my current HDD when I bought it. The age of my hardware is almost exactly three years, and I've used this OS and my current HDD for about one and a half years.

Would be very grateful if you could help me! Thanks!
JanneRoos

A:BSOD playing WoW or unplugging soundcard

  
Quote: Originally Posted by JanneRoos


I recently started playing WoW again after almost a year, and now my computer has suddenly started getting bluescreens when I play. It has also sometimes got bluescreens when I unplug my Line 6 UX2 soundcard, which has been going on for a while. I have never got bluescreens when I play WoW until now. So I would like to get some help analyzing what's wrong. My computer has also since I installed this version of Windows 7 occasionally shut down or rebooted randomly without even giving me a bluescreen. I don't know if this can be fixed, but if you can help me with that too, it would be great.

I've got Windows 7 Home Premium 32-bit. It's not the original OS installed on my computer, I used Windows XP Professional 32-bit as my first OS and then the Windows 7 Beta before upgrading to this version. It's an OEM-version, I got it installed with my current HDD when I bought it. The age of my hardware is almost exactly three years, and I've used this OS and my current HDD for about one and a half years.

Would be very grateful if you could help me! Thanks!
JanneRoos


JanneRoos hi and welcome
Several problems here

1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause. Yours 2004

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll dow... Read more

Read other 1 answers
RELEVANCY SCORE 51.6

Hello,

I hope this hasnt been reposted. i tried searching but couldnt really come up with anything new to try.

here is what i have.
Dell Inspiron 9300
OS XP SP3 Media Center Edition
there was a BSOD error that came up one day while unplugging the AC power from the laptop to inorder to move the laptop. restart the machine on battery power. no problem. plug the power back in BAM BSOD. restart with power ac. no problem. Unplug. BSOD. the file in question on the BSOD came out to tosrfusb.sys. i researched this it turns out to be some sort of driver issue with the bluetooth device that toshiba makes on this laptop.
i but in the xp disk and ran SFC /scannow from CMD.
rebooted and the issue went away.

please see attached txt for BSOD screen view i used from Hiren's boot CD.



now i get a dialog box that says. the sutsem recovered from a serious error. with these codes in the box.
BCCode : 100000d3 BCP1 : BA310804 BCP2 : 00000007 BCP3 : 00000000
BCP4 : 80527F30 OSVer : 5_1_2600 SP : 3_0 Product : 256_1




the system seems stable but this box still pops up from time to time.

any other suggestions?

A:BSOD while unplugging power chord.

Please follow these to get us the files we need

http://www.techsupportforum.com/foru...ta-452654.html

Read other 5 answers
RELEVANCY SCORE 51.6

Windows 7 x64 pro?
- the original installed OS on the system? yes

- OEM = came pre-installed on system

- What is the age of system (hardware)? 2.5 yrs
- What is the age of OS installation 2.5 yrs (have you re-installed the OS?-NO)
======================================================
Twice today when debugging network issue, I unplugged ethernet cable from router and got BSODs. I ultimately swapped out the router to get network back up.

I have lost network connection almost daily, and cannot disable/enable the adapter. Must reboot to fix... and reboot takes 10-15 minutes before shutdown.

FWIW I am also having right-click Win explorer issues as well. Don't know if any of these are related.

Many thanks

A:BSOD when unplugging ethernet cable

All of the Driver power state crashes were related to theCitrix Network Enhancer Miniport or Cisco VPN client. Yours is from 2008. Update to something win 7 compliant.
Other old drivers

Code:
tifsfilt.sys 8/29/2007 8:37:29 AM fffff880`05fa8000 fffff880`05fbf000 0x00017000 0x46d56889
timntr.sys 8/29/2007 8:38:23 AM fffff880`01a7d000 fffff880`01b2d000 0x000b0000 0x46d568bf
tdrpman.sys 11/12/2007 9:36:33 AM fffff880`01cdb000 fffff880`01d6f000 0x00094000 0x473856e1
snapman.sys 11/22/2007 4:19:33 AM fffff880`01d77000 fffff880`01db2000 0x0003b000 0x47453b95
dne64x.sys 11/10/2008 9:01:24 PM fffff880`051ad000 fffff880`051d9000 0x0002c000 0x4918d964
SABI.sys 5/28/2009 2:38:02 AM fffff880`030bf000 fffff880`030c9000 0x0000a000 0x4a1e314a
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


-... Read more

Read other 1 answers
RELEVANCY SCORE 51.6

Hi, I recently installed Windows 10 and have been experiencing frequent BSOD ever since. I get them when I put my computer on sleep when I leave my desk or when it goes to sleep automatically. It was also happening when I unplug my USB splitter (which was not a problem in Windows 7). I can avoid the USB problem by unplugging devices one by one, but the other issue is a real problem.

I also have an SD card and almost always use an additional monitor (with the latest drivers), if that's helpful.

Thanks

Read other answers
RELEVANCY SCORE 51.6

Basically it just gives a BSOD every time i unplug the usb.

I have the latest beta drivers downloaded from windows update.

I have a wired control and the xplorer guitar (gh2), both works perfectly, the only trouble is when i unplug.

The BSOD indicates something like irql less or equal 0x000000a

Help please,

BTW i cant upgrade the driver because it gives the BSOD when disabling it to do the upgrade

A:BSOD When unplugging xbox 360 accesories

Maybe you have to use the tray icon for removing devices safely, before you can physically unplug it? Did you try that?

Or reboot with it removed, then update the driver.

Read other 4 answers
RELEVANCY SCORE 50.8

Hi, i always get BSOD after unplugging eSata drive which is shared over network. BSOD happens always 5-10 minutes after i unplugging eSata drive. Before i shared into network, BSOD never happen. I tried removing all the sharing, but BSOD still occurs. even it will happen when i only "safely remove device" from windows while not physically unplugging the device. Changed into "Quick Removal" but also didnt help.

below are from Who Crash report:

computer name:
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 6371704832 total
VM: 2147352576, free: 1917075456




--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 20/6/2013 2:28:42 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\062013-15178-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C00)
Bugcheck code: 0xA (0x28, 0x2, 0x0, 0xFFFFF80002360682)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: ... Read more

A:BSOD 5-10 mins after unplugging eSata drive

attached dump files

Read other 8 answers
RELEVANCY SCORE 50.8

Hi guys,

I just bought an Intel NUC D34010WYKH and installed Windows 7 x64 and all Intel drivers needed. I want to connect to that Computer via Windows Remote, so I don't need a monitor connected.
But every time I disconnect the screen a bsod occurs. I attached the necessary files for you in a zip. Could you please take a look at these?
I could not note down the message because I had no monitor connected and the system restarts immediately so there was no time to plug in the cable again. I hope it's all in the zip.

Thank you so much in advance!
muffn

A:BSOD after unplugging HDMI-Cable from Intel NUC

From what i could research; it appears the bsod is pointing to your onboard graphics driver. I would go to your motherboard manufacturers site and download the latest drivers. Then; uninstall the drivers that currently exist; and reinstall the drivers that you downloaded. Try that out and see what happens. Post back if no results.

Read other 4 answers
RELEVANCY SCORE 50.8

Lately I've been getting BSODs whenever I unplug my Seagate GoFlex Pro portable external hard drive from my Esata port on my Dell Studio 14 laptop.

Even after I "safely remove hardware" and unplug the drive, a couple minutes later the BSOD shows up.

I even have the hard drive policies set to "Quick Removal" and and the crash still happens.

Something else that may or may not be related. The laptop has also just completely rebooted without any warning screens or apparent reason at times.

I have attached the 8 .dmp files generated in the last month.

Any advice is much appreciated. Thanks.

A:BSOD after unplugging ESATA external drive

Could you try another external hardware, iPad, iPhone, MP3 player, etc... and try doing the safely remove hardware. If it doesn't cause BSOD, then it there is a fault with your Seagate External HDD.

Update your Intel Matrix Storage Driver (Intel Rapid Technology) - here

Code:
iaStor.sys Fri Jun 05 13:53:40 2009
Update... something Broadcom (likely your Ethernet) - here

Code:
k57nd60a.sys Sun Jun 07 19:36:34 2009
Update your CD/DVD software

Code:
PxHlpa64.sys Wed Jun 24 11:16:35 2009
Update your Realtek HD Audio Function Driver - here

Code:
RTKVHD64.sys Thu Jul 02 21:42:36 2009
Regards...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {ffffffffffffffd0, 2, 1, fffff80002e916e0}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 9 answers
RELEVANCY SCORE 50.8

Hello, I've noticed that my computer crashes everytime i unplug or i plug in and USB drive. Today I bought a new USB mouse and when I connected it no crashes were seen, but when my pc installed the last driver, the BSoD appeared once again. I'm using Win7 64b and I really don't know what can I do, I've tried everything like uninstalling all USB drivers and recreate the INFCACHE.1 file, but still nothing. What can I do to solve this?
Thanks in advance.

A:BSoD when plugging/unplugging USB and when installing USB drivers

1) Does it happen with all usb devices or only the mouse?
 
2) Does it happen with all usb ports?
 
3) Does it happen in safe mode?
 
4) Look in device manager - are there any yellow or red symblos?
 
5) Download and install the newest chipset driver for your system. If it's a laptop, get it from the website of your laptop manufacturer. If it's a desktop, you can get it from either the desktop or the mobo manufacturer's website.
 
6) Look for a bios update.

Read other 5 answers
RELEVANCY SCORE 50.4

hi,
after i turned the computer off by unplugging the power cable by mistake while playing Counter-Strike: Source (which made windows turn off unexpectedly) i keep getting random BSOD. TY

INFO:

1-never had a bsod for 2 years.

Question:

1-will re-installing windows fix it ?

A:BSOD after unplugging power cable by mistake while playing Css.

Security App

Crashes indicate Avira being a possible cause. Remove Avira and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials and Malwarebytes, both recommended from a strict BSOD perspective.

Microsoft Security Essentials, Free antivirus for windows
Malwarebytes Anti-Malware Free



   Information
DO NOT start the free trial of MalwareBytes. Deselect the option when prompted.

Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - Disk Check
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Read other 9 answers
RELEVANCY SCORE 50

Every time I unplug this Wheel from the USB port I get a BSOD. I do not have the error codes but i have downloaded and ran the SF Diagnostic tool. I am using windows Ultimate x64 SP1 on a custom built system that is several yrs old now. I've never noticed this problem before this week.

A:BSOD when unplugging Logitech Wheel (model number E-UK12)

Activation
Please post this report before we begin: Windows Genuine and Activation Issue Posting Instructions

Read other 1 answers
RELEVANCY SCORE 49.2

Hi Experts, I have a serious problem using my W520 since a few month. When plugging in or unpluggingthe power cable the system directly jumps into Blue Screen (BSOD). I used a small tool to extract the basic dump message: RESOURCE_NOW_OWNED I installed the newest versions of LENOVO Solution Center, LENOVO Energy Management, ...I did an BIOS update longer ago, but I'm not sure, if there was a time-based relation to my problems. The BSOD occurs when: * Laptop started with power cable => Power unplugged* Laptop started without power cable => Power plugged* Laptop in sleep mode => Power plugged and Laptop started again lifting screen* Bring Laptop in sleep mode => Power plugged Does anybode had this problem. Before every meeting now I have to shutdown and restartthe engine... I'm not sure, if the Windows repair CD could detect and repair such a problem.Thanks in advanceKlaus Wegener

Read other answers
RELEVANCY SCORE 42

I am still experiencing system freezes possibly triggered by mouse movement.

Still reading a lot here but asking for help.

New zip attached as Whiskey7a.... grr system froze while typing here (and moved mouse)

I have tried system repair sfc/scannow to no effect.... All drivers just checked,,,
Below type in italics is the original post....

Been experiencing some BSODs, mouse freezes and reboots. Reading lots here in the forum (thanks) and trying to understand what is happening and why. Read 'before posting in the BSOD forum' and hope I got it right?

I got a new MS wireless KB & mouse for Christmas and I can't be sure but I think problems started about then. I reverted to the old wired ones and problems still evident.

I really think I experienced a mouse freeze in safe mode.

New Samsung SSD a while ago and 64bit OS & will provide any info that may help.

I have been searching/reading to no good and looking for help please

I was reading about PC freezing up and discovered Event Viewer.. (screen attached)

In event viewer see lots of errors and warnings that I don't think are quite right and not at all sure if they are causing BSODs.WLAN Extensibility Module has failed to start.

Module Path: C:\Windows\system32\Rtlihvs.dll
Error Code: 126
I initially tried Malwarebyte and AVG software but no improvements.

I tried Driver Verifier and got a BSOD but don't seem to have a dmp file(?) so will continue reading here, and please let me know if you need other info.

A:BSOD, mouse freezes &reboots possibly after new MS wireless KB & mouse

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800858c028, b2000040, 800}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Start by completely uninstalling AVG and replacing with MSE.

If system still BSOD's after change, then please follow this:
Stop 0x124 - what it means and what to try

Read other 9 answers
RELEVANCY SCORE 38.8

Even after unplugging my PC from my TV and back into my monitor (which I got high FPS on) my FPS is significantly lower than normal and my PC just crashed while playing CSGO. Any help would be great

A:Low FPS after unplugging PC from TV

Install this little tool and run it.
Top of tool, click Analyze.
scroll down and retrieve the information.

Copy / paste in your next reply.

WhoCrashed 5.03
Comprehensible crash dump analysis tool
for Windows 8.1/8/7/Vista/XP/2012/2008/2003 (x86 and x64)
Flashorn.

Read other 3 answers
RELEVANCY SCORE 38.8

Good Day Everyone..

I am having this problem.. well on standby the local area network shows it has network 2 but when I opened any browser or use an application that uses the internet it goes unplugged, enable and then identifying... as the results I will get a message of no internet connection in the browser but after that it will stay on network 2 message again like its fine...

I tried to ping google.com -t and it seems it doesn't go unplugged, enable and identifying.. it is pinging well..

nothing changes even if I change the settings in the speed & duplex.

I also tried ipconfig /release and /renew.. /flushdns

it is like this for 3 days now then I am rebooting the canopy yesterday.. changing some settings to forced and it kinda worked.. though it goes unplugged, enabled and identifying again.. once per hour I think... then this morning this problem is back again....

edit: ok I just noticed now when I use ipconfig /all
the media state are disconnected even though it says network 2 in the local area network.. also the enabled word... in the window is blinking...
 

A:Keeps on unplugging

Read other 9 answers
RELEVANCY SCORE 38.4

Getting ready to do the install on my new SSD with some trepidation. I have Raptors in Raid 0 right now and would like to simply unplug them, set the BIOS to AHCI and use the 0 port for the SSD experiment/potential fiasco. What I hope to be able to do if the SSD doesn't like me, is to unplug it, set the BIOS back to Raid, plug in the Raptors and pretend the whole thing never happened. Does this stand a chance of working?

A:Plugging and Unplugging!

I wouldnt unplug the raptor raid - if you use intel raid (the one i'm sure of and probably similar, or the same for others) when you enable raid in the bios it also enables AHCI - so you should be good to go with testing the ssd drive - just unplugging a raid array can be very hard to set up again - i did it years ago and it was a miracle i got it back up and going again (that included reinstalling the OS) so not recommended - it also depends what options are available in the raid rom (i think its called) which you set it up in before you install the OS. From memory, which is bad, the problem was it couldnt recognise one or both the drives.
It depends on your motherboard I guess but for mind it should be ok - running raid and using the same controller to use a ssd drive in AHCI mode - but treat this as my opinion - you should be able to find information on your motherboards site, or intel etc's, site. Or wait for more replies as Im uncertain and more repies means more suggestions.
If it has 2 controllers eg intel and jmicron use the JMICRON if it supports AHCI to be on the safe side.

Read other 3 answers
RELEVANCY SCORE 38.4

Hello,
Recently, I've been having problems with my HP cd-writer. The cd-writer automatically plugs and unplugs itself... even when I'm not using it!! I want to know what's going on and how to fix this problem. Thanks
 

A:My CD-writer keeps unplugging itself...

Read other 12 answers
RELEVANCY SCORE 38.4

Hi,

I wonder what'd happen if I unplug the desktop tower cord from the power surge or electric outlet? Will I lose what I have in tower? I unplugged the desktop monitor cord from the power surge several times and nothing was lost, but I am not sure about the tower cord. The reason is because I need to move the table around in the room and need to unplug the cords. I am sure nothing will be lost if unplugging tower cord from the power surge or outlet because the table needs to be moved around in the room, something else like moving out of the house, etc if you know what I mean.

Also, what would happen if unplugging the cords from the desktop monitor and tower themselves, not from power surge/outlet? Would everything be lost? Much thanks.

A:Unplugging cords

Save everything, then turn everything off, using the approved procedure and then you can unplug.
As always, your important stuff should always be backed up. An unexpected improper shut down, and stuff can be lost.
Stuff can be lost for other reasons, too.

Read other 3 answers
RELEVANCY SCORE 38.4

I've recently acquired a digital camera, and have been testing snaps then putting them into the PC for editing. When I remove the lead, I get the "Unsafe Removal Of Device" window pop up warning me about not stopping the device properly. Now this has never caused me any issues when unplugging any USB hardware.

So my question is, can the warning be disabled totally? Every time I unplug the camera the window pops up and wants to place its icon in the system tray. It's starting to get on my nerves!

Thanks in advance
 

A:Unplugging USB Devices

Alan,This problem can occur because of a logic error in the code for the Usbhub.sys file. Leave it plugged in so that when you download the latest service pack from Microsoft it will be picked up, and the proper SP will be downloaded. Have a good day.
 

Read other 2 answers
RELEVANCY SCORE 38.4

So recently, my Y40-80 started to shut down immediately after i unplug the power source. At first, i figured it's due to my battery, so i got a new one and got rid of the old one. But the problem still exists. I've called in to Lenovo support and they said my warranty doesn't cover this, so it'll be due to charge, which i think is ridiculous since if it's a hardware failure, i do not see why i should be charged just because i don't have the original battery. Anyways, i've tried reformatting and that did not work. Anyone out there could help me please? Appreciate it!

A:Y40-80 shuts down upon unplugging

Hi rx24race , 
 
Welcome to the Community Forums. 
 
Would the new battery be a direct purchase from Lenovo or declared genuine replacement Lenovo battery ?
Within the warranty coverage would be the original parts that came with the machine.
 
As you mentioned that with a new battery you are still having the same issue but since this would be a charging issue , it is yet to be investigated if it was the systemboard or battery itself is the fault. 
 
Option that I suggest is to have it taken perhaps to service provider like best buy that can check with a certified compatible battery and have them assist you on having it serviced or to call in directly using the same case number you were provided.
 
Update us on how it would work best for your situattion.
 
Regards 

Read other 1 answers
RELEVANCY SCORE 38.4

I gave up printing w/ this wireless computer when I read the posts and it said it was because the computerwent to sleep.  I bought the regular cord but it does the same thing!  I have to unplug it every time I want to printand the printer has to go thru the whole process of setting up again.  Thank you,Sue

Read other answers
RELEVANCY SCORE 38.4

Don't have a router and want to use the modem with an Xbox. Should I shut down the computer before removing the modem cable and before plugging it back in when I'm done with the Xbox?

Thanks.

A:Unplugging Modem from PC

You don't have to, but it might not pick up the network when you replug the computer back in.

Read other 2 answers
RELEVANCY SCORE 38.4

I borrowed my sisters camera for a trip, while i was copying my videos and pictures onto my computer, the cord got unplugged (wrapped around the chair)
and now, on the camera, i cant Take pictures, cant record Video... when i go to preview mode, it says "MEMORY REQUIRE FORMAT" then it flashes to 'no data in internal memory'

i checked the SD card, and there was nothing on that, and i need to fix this problem... HELP

the type of camera is a Centrios DSC-314 3.1 megapixel

(also... dunno why, but when i go to picture mode it says 2X zoom instead of 4)

I dont really want to go into windows and format it through there, and i cant find a selection in the camera settings to format it... can anyone help me?
 

A:Unplugging camera

Read other 8 answers
RELEVANCY SCORE 38

Stop: c000021a {Fatal System Error} The Session Manager Initialization system process terminated unexpectedly with a status of 0xc0000189 (0x00000000 0x00000000) The system has been shut down.

That was the first time i got any message. I have a systemax computer and am on windows xp sp3, but after a friend came in from out of town to visit, i noticed him on my pc and thought nothing of it. Then when i would use it, it would just cut OFF as if the power source was being removed, not the actual shutdown process. But i would be able to cut it back on, however, usually right after logging in or as i try to open a program, it cuts off again. I kept cutting it back on and tried a program from microcenter called 'system mechanic'. it said i had 95 registry errors and it fixed everything....or so i thought. I used my pc again happily for a whole 2 hours then, it cut off again. then I couldnt get it back on. when i tried it gave me the above message. It wouldnt even start in safe mode. I thought i ruined my pc, but then i remembered that when i leave it alone until after midnight, it comes back on.... i left it alone until 6 am this morning, and i insalled a fix it program from MS, i just want to make sure this will actually fix the problem and want to know what caused it, what does that mean? This guy became very upset with me and did a lot of petty things b4 i put him out like unplug my mouse, keyboard, and speakers from pc and broke my ac! and more. Plus i know he is a p... Read more

A:PC just shuts OFF as if someone is unplugging it randomly....HELP!!!!

Hi best to stay away from Registry cleaners - cause more problems than they solve.
Try..
Reboot - tap F8
Choose.
Safe mode with command prompt..
Log on as administrator.
Type.
%systemroot%\system32\restore\rstrui.exe
Press enter>Choose>Launch system restore.
Choose date prior to the problem.

Do you have the original install Cd?
Error message.
http://support.microsoft.com/kb/156669
 

Read other 1 answers
RELEVANCY SCORE 38

Yesterday, I was on my computer, when I decided to unplug a USB connection to my printer off from a USB port at the top of my PC. Upon doing so, my monitor went blank, and I think I heard the fan levels increase. My keyboard lit up all of the lights, which only ever happens while the computer is booting up.

I waited for a while for the display to return, but nothing happened, so I attempted to manually shut it off by holding the power button down. Nothing happened. I managed to unplug the cord, to turn off the PC. Upon plugging it back in, the PC would not start.

So far, I have concluded that, the power socket and the cable both are fine. The GPU LED light is also not on. I checked the connections to the motherboard from the power supply and they seemed all in place. I also ran the 'paperclip' test on the Power Supply, which worked. I moved the RAM sticks to different slots, and even took out the memory, but didn't hear any sounds or notice any power.

Interestingly, the LED power light on the case seems to occasionally work. Hoping that the issue is not the motherboard.

SPECS:
Motherboard: MSI Z97 G55 SLI
POWER SUPPLY
Cosair CX650

All help is appreciated. Thanks
 

Read other answers
RELEVANCY SCORE 38

Strange. Won't let me post under Networking but here is my question ...

Is there any harm in unplugging a wireless router every night?
 

A:Unplugging Router Harmful?

No harm at all.

But the best is to enable WPA2 or WPA encryption and use a long complicated key. And if you want to be real secure, change that key every other month.
 

Read other 2 answers
RELEVANCY SCORE 38

Is this a good idea? My fan is making all kinds of noise, I have already bought a replacement card from newegg.com, so the issue is only valid for a few days.

If I unplug the fan, will my card/system be ok?
 

A:Unplugging the fan on a GeForce FX 5200

Not a good idea.

If it has a fan it probably means it produces a lot of heat. The heatsink alone might be okay if you don't do anything GPU intensive, but you'll probably encounter overheating problems during gaming.
 

Read other 9 answers
RELEVANCY SCORE 38

Game runs fine when charger is connected but poor performance when not.To disable some obvious power saver functions probably causing the issue, I set battery mode to 'High Performance'.Also I have instead of auto, selected to use Nvidia graphics instead of Intel of course.Don't really know what power saver options I'm missing to disable.

Read other answers
RELEVANCY SCORE 38

Hello, I will be out of the country for about 12 days and I am thinking I should unplug my laptop (switch the powerstrip to OFF) while I'm away just to be on the safe side. I want to do this for peace of mind since I will be so far away. I have an old laptop that is running on 3 cylinders.

Upon return, will I be experiencing difficulty turning my computer back on? BTW, I am with CenturyLink Wireless.

I've not done this before as I've not been gone that long.

Thank you very much.
 

A:Solved: Unplugging my Laptop while I'm away

Read other 6 answers
RELEVANCY SCORE 38

When I close the lid of my computer, it makes the alert noise as if you unplugged a device. When I open the lid, it makes the alert noise as if you plugged in a new device. The screen takes a few seconds to turn on, and all of my windows which were open will be resized, and all of my desktop icons are rearranged.Happens every time I open or close the lid, and it's been about a week now.About two months ago, I actually sent this in to Lenovo for some repair from a drop, and they replaced just some plastic parts of the shell and the keyboard. It worked fine when I got it back, and once the screen is on, it continues to work fine. I'm mentioning this because I don't think the screen is becoming physically unplugged, it looks like it is in top shape after the repairs. Any thoughts?-Matt

Read other answers
RELEVANCY SCORE 38

So this bug seems to only happen about 50% of the time when I unplug USB devices from my computer. When I play certain games I have to unplug my racing wheel and flight sticks and doing so sometimes causes my computer to start beeping and stuttering. The beeping and stuttering only happens when I either move the mouse or click a button on the mouse so I am wondering if it's got something to do with the mouse but I've had the mouse for a while and have only encountered this bug fairly recently. Anyone heard of this before? Any suggestions as to what I should do?

A:Unplugging USB's causes computer to break

Hi,
Well I doubt it's the mouse
You have a i7 what exactly and also what is your power supply so please fill in the rest of your system spec's and also include which antivirus you use as well as any other third party utility,
Use Clean boot,
Troubleshoot Application Conflicts by Performing a Clean Startup
Click Start and type in the search box,
msconfig
Click on the suggestion on top or hit the Enter key,
Go to the Startup section and take some screen shots for a complete list,
Go to the Services section and on the bottom left Check the box to Hide All Microsoft services,
Repeat the screen shots,
See the links above my signature on how to take and upload screen shots here,
Cheers.

Read other 1 answers
RELEVANCY SCORE 38

Is it a good idea to unplug my cable modem if Im going to be away on vacation? Is it good to unplug it period? Thanks
 

A:Unplugging Cable Modem

Read other 8 answers
RELEVANCY SCORE 38

Im guessing that is not good. My wife unplugged the computer during a download after it froze and now it takes 45 minutes just to reboot. Once it's up, it might take an hour just to open the control panel.

If it does open up, it will then freeze.

Dell optiplex with xp prof.

it was running fine until the unplugging part.

any ideas?

Thanks

A:Unplugging computer during a download

run
chkdsk /r

Read other 1 answers
RELEVANCY SCORE 38

Hi everyone, hope this is a good year for all. I just picked up a new computer running xp. It came without a floppy drive, so I picked up a portable external usb floppy drive. Is it ok to plug in, and unplug the floppy to the usb port with the computer on? Thanks for the tips/advice.

Regards
IMP49
 

A:Plugging in and unplugging a usb device

Read other 8 answers
RELEVANCY SCORE 38

I have had trouble shutting down a computer I am building. It goes through the motions then says its okay to turn off your computer now. All the fans are still running and I assume by the okay to turn off your computer now message which has a windows logo on it, the HD is still spinning. Hitting the power buttons just causes the computer to restart. There is no way to shut this computer down.

If I am unable to resolve this issue, how bad is it to turn off the computer by unplugging it? What I would really be doing is adding a power strip with an on/off button to shut the computer down.

Thanks
 

A:Unplugging a running computer

Read other 10 answers