Over 1 million tech questions and answers.

Wireless network doesn´t work

Q: Wireless network doesn´t work

Hi. I have four HP Envy notebook computers that I use regularly at work. Suddenly, starting up one day, all four computers stopped connecting to our wireless network. I tried at a different wireless network and neither of the computers still cant connect. I even tried a third and still no result. All of my other computers that runs Windows 10 (2 Acer, 1 Asus, 8 iMac) are still able to connect to all of the wireless networks. I even run Windows 10 on all 8 iMacs and they can still connect to all of the networks. And there hasnt been any chances to the wireless network. Strange thing is when I bring the computers to my home they can find my wireless network at home, all four of them with no problem. Ive tried all Windows repair and HP assistant and none of it works. Ive updated to the latest drivers and all I can think of. What can have happened. Ive noticed it has been a Windows update, but if that update have affected the network drivers, how can it the work at home. I can also add that all four laptops work if I use Ethernet. Hope someone can help out. //Richard

RELEVANCY SCORE 200
Preferred Solution: Wireless network doesn´t work

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Wireless network doesn´t work

Hello @Richard63, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the WiFi issue, and wanted to assist you! I understand that the Envy notebooks will no longer connect to the network. However, they all connect to your home network. If you believe an update to be the cause, you can try performing a System Restore, to set the notebooks back to their previous working states. You can also try uninstalling the network drivers, then restarting the notebooks. This should allow the system to install compatible drivers. If you continue to have issues with the notebooks only connecting to the home network, then you may consider restarting/resetting the router. Please post back with the results. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for. Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

Read other 1 answers
RELEVANCY SCORE 74.4

Hi all,
I purchased a used IBM T41 laptop with WinXP and everything was working fine: cable and wireless internet, Dvd reader , wireless signal (like antenna) was flashing at the bottom of the screen, .
I had some problem and reinstalled OS: deleted partition and formatted into NTFS, install fresh WinXP.
I didnt get any error during installation, but some problem came after: internet, wireless connection, USB drivers, DVD reader and many other.
I couldnt find network adapter name in the Device manager.
To fix this problem I download drivers from IBM site and try one by one to install it.
Finally my internet start to work and I do not have any yellow question mark in Device Manger, but wireless internet and dvd writer do not work.
Network Adapter( in the Device Manader) and Network Connection display only cable internet device and do not have Wireless device type. Also, I have Wireless Link and Wireless Network icons on the Control panel.
Why wireless doesnt work? How can I fix it?
Is this possible that my laptop did not have wireless card before?
Is this possible that card stopped to work after reformatting to NTFS?

Thank you
 

A:wireless doesn’t work after reinstall OS

Read other 7 answers
RELEVANCY SCORE 74.4

I have a problem, i have windows vista in my laptop, my wireless use to work perfectly but now it doesnt want to connect to any page (not even google), the messenger and limewire work, but it doesnt show me any page, ill be very glad if you can help me, thank you.
 

Read other answers
RELEVANCY SCORE 68

My notebook computer is Lenovo thinkpad X1 yoga (20FQ), it can?t be enabled WoWLAN capability. The checkbox ?Allow this device to wake the computer? can?t be selected on the power management tab of the wireless network adapter (Intel AC 8260) properties page. Like this: But Wake on Lan (the hard-wired network adapter is Intel Ethernet Connection I219-LM) is ok:Another X1 yoga of my friend has the same problem, but a X1 Carbon (with the same model adapter Intel AC8260) I found has no problem with this.The operation system of the X1 yoga is win10 pro 64-bit (shipped with the laptop by default), and the adapter is Intel Dual Band Wireless-AC 8260. I?m sure that the adapter Intel AC 8260 support the WoWLAN function, I checked the documents of Intel. I restored the system to the Windows preload environment, and it not works. I checked the BIOS, the setting ?Wake On Lan? has been enabled, and I uninstalled and then updated the drivers of the wireless network adapter, it doesn?t work still. I googled some methods such as edit the Registry Editor, download the driver (Enabling Wake on LAN) at the lenovo support website, etc., but non-effective. I guess is there something wrong with the drivers or BIOS of X1 Yoga? Or X1 Yoga just simply doesn?t support WoWLAN? Or this problem is due to a hardware failure on some batches? Anyone has any suggestion? Thanks a lot! 

A:Thinkpad x1 Yoga doesn’t support WoWLAN (wake on wireless Local Area Network) ?

try this:
https://answers.microsoft.com/en-us/windows/forum/windows_10-networking/enabling-wowlan-wake-on-wire...

Read other 1 answers
RELEVANCY SCORE 58

Hi all,

The main problem is type in the forum boxes but not send this message or anything happens after click, rest of functions are OK.
It?s win xp, sp3

Thank you!

Read other answers
RELEVANCY SCORE 58

hi everbody i have a toshiba satelite a355 sp7927 R and I change the operative system from vista to windows 7 and then my touch pad does?t work. I try install the drivers from the toshiba support web side and the problem still exists. please someone help me ???????

Read other answers
RELEVANCY SCORE 57.2

Yesterday i installed a PCI wifi card in my pc after which my sound completely stopped working, i have tried updating drivers, selecting the right speakers in the windows control panel and pretty much any other suggestion i found on other sites. My concern is that i might have damaged my motherboard while installing the PCI (I hit it with a screw driver when trying to remove my GPU to fit the PCI in), and that this is the cause of the problem. Do you have any other ideas on how i can fix my sound in windows or should i just assume i damaged the motherboard and buy a soundcard/ a new motherboard?
 

A:Solved: PC sound doesn´t work.

The test is to remove the wireless card, as of course beofre you installed this the sound worked
If it then still does not work and there are no warnings shown in device manager for the sound then I think you can presume that you have indeed damaged the motherboard.
That said, is the sound coming from the integrated sound chip or from the GPU
 

Read other 14 answers
RELEVANCY SCORE 57.2

Its been two weeks that I couldn't use F2 to decrease volme, both F1 and F3 are working well so far. Does any one know what's wrong with my laptop? Thanks,

Read other answers
RELEVANCY SCORE 57.2

Hi, I have got a couple of weeks old Notebook whoms TouchPad mouse suddenly stopped to work. According to Device Manager its enabled and working correct, but it doesnt. I have tryed to found guidelines to fix it by means of Google, but nothing has helped me. I have updated and restored and checked everything but nothing has helped me to get it work again correct. I havent had courage enough to do a hard reset yet or to go back to factory settings. What to do ?????

A:TouchPad mouse doesn´t work

Hello @Kotitonttu,  If your PC is under warranty,  please Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer Verify the warranty status here: http://support.hp.com/us-en/checkwarranty .   Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

Read other 1 answers
RELEVANCY SCORE 56.8

Exact same problem on Windows 10.
Tried all of six steps above, including buying three new cables in step 6 one of those was the specific cable recomended by HP support.
Make 9 calls to HP  and 4 calls to Microsoft. HP signed me up for their paid Freinds Support and I called them 5 times.
I tried the monitor on a surface Book, and Asus Desktop and a Dell Destop. Did not work on any of them. I have installed the latest drivers multiple times and update the firmware in my laptops, Surface Dock and Asus Desktop.
HP connected to my Surface Book several times and installed two different - third psrty partitioning programs. One didn't work the other did but it was a trial version and wanted more money than I felt it should cost.
 
I'm using it as a single monitor with no partitioning. It mostly works but has some strange events where the mouse clicks are off by several undred pixles. rebooting fixes that.
 
Now I have atiny little spider runing arround under the front glass. Very distracting. How did it even get in there? I would have thought the area between the glass and the disply would be sealed arround the edges. 

Read other answers
RELEVANCY SCORE 56.8

Hi, My touchpad it doesnt work I cannot set because id diesnt appear in my device What can i do? Thnaks a lot

Read other answers
RELEVANCY SCORE 56.8

when I plug my PS/2 mouse in, it beeps and doesnt work... please help me, maybe it is something with bios or i dont know, but the mouse is working well. I have tried it on other pc and it worked so...PLEASE
 

A:when I plug my PCI mouse in, it beeps and doesn´t work...

I think you mean you have a PS/2 mouse. Try another mouse, and see if that cures the problem. If not remove the mouse from Device Manager and on re-boot let Windows re-detect it to see if that helps.
 

Read other 3 answers
RELEVANCY SCORE 56.8

I am using Windows 7 Professional with the HP ENVY 34c Monitor.I am having a problem with my HP My Display Functionality.I installed the drivers and the software and nothing works on the MY DISPLAY Program.Partitioning does not work, App Sync does not work, even the screen rotation feature does not work.HP My Display is updated to latest version. The only thing that does work is the Wizard, which allows me to adjust the Screen Brightness and Contrast. The main reason I purchased this monitor was to use the Partitioning features, so please someone help. Thank you in advance for any suggestions.

A:ENVY 34c - Partitioning - HP My Display doesn´t work

Hello @MiRoCZ73, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your monitor is not able to access the HP My Display software for the purpose of partitioning and App Syncing, and I would be happy to assist you in this matter! To correct this issue, I recommend removing all of the My Display Software from your computer, and re-installing it. If you do not have the software on hand from a CD, I suggest downloading and installing the software by clicking on the link below: sp70687.exe If the issue continues, I suggest following the steps below: Step 1. Unplug the power cord from the back of the monitor and the wallStep 2. Hold the power button down for at least one minuteStep 3. Plug the power cord back into the monitor and then into the wall outletStep 4. Press the Menu button on the monitorStep 5. Navigate to the Factory Reset option and select itStep 6. Try a different cable connecting your monitor to your computerIf the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If your monitor is still not able to use partitioning, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.www.hp.com/con... Read more

Read other 2 answers
RELEVANCY SCORE 56.8

I have a lenovo v110 for 2 months and I?m having many problems with it such as usb ports not working or stuck pixel on screen and it turns on randomly what can I do

Read other answers
RELEVANCY SCORE 56

Hi

I have got outlook 2010 initially my work email was on POP3/IMAP (I was using IMAP) and outlook Suggested Contacts was working fine no problem ,,,,means when I try to type any address in To or CC fields automatically gets completed.

Then my company change email accounts for all personnel to from POP3/IMAP to Exchange, I set up a new profile on my outlook 2010 to receive email from the exchange, and IMAP is not working any more.

How can I make those Suggested Contacts that were working with IMAP before to work with Exchange email ?

Thanks
 

Read other answers
RELEVANCY SCORE 56

Essentially, everything is wrong with my computer and I have no way to fix it. The first problem arose about a year ago. My laptop battery suddenly wouldn?t register any charge, and could only be used while plugged in. I thought that might be a battery issue, but, a few months later, I replaced the battery and still had the same issue. Next, I started getting the ?blue screen of doom,? the Kernel Data Inpage Error. My laptop began to consistantly stop working after a few hours of use: webpages would stop loading, files wouldn?t open after being clicked, and then the mouse and screen would become unresponsive. Most of the time, I turn the computer off, unplug it, and restart it to resume use. However, if I left the computer on, it would either give a black screen reading ?all boot options are tried,? or the blue Kernel Data Inpage Error screen (the Kernel Data Inpage Error is the rarer of the two). It would last longerer the less I used it and after repeated sessions of rebooting after freezing, it would only last a few minutes. It also took a while after startup before it could open programs or load websites, but besides this, it still functioned as a proper computer, so, while frustrated and constantly attempting to find a solution, I dealt with it. However, recently, it?s begun to have errors opening any program not factory installed with windows or Google Chrome (I have no idea why Chrome, other browsers won?t open). Originally, I received an error box that... Read more

Read other answers
RELEVANCY SCORE 55.6

When I turn the screen 360 o the tablet mode doesnt turn on automatically and the keyboard doesnt turn off. How can this be fixed? As it is now, its useless.

Read other answers
RELEVANCY SCORE 55.6

Hello, I have a Toshiba Laptop U925T ...I upgraded the OS from Wiindows 8 to Windows 10 and my Touch Screen stop working. Now I downgrade to Windows 8 again and the it still not working.
 

A:Toshiba U925T-Touch Screen doesn´t work after upgrade OS

Probably missing a driver. Go to Toshiba's web site and locate the driver for your Windows version
 

Read other 1 answers
RELEVANCY SCORE 55.2

I recently switched ISPs (going from DSL to Cable), and that's when everything went wrong. In order to get the new network up and running, I needed to use a new router. I setup this network and everything seemed fine (all computers could see and connect to the new network, and even the printer could see, and connect to the new network). For whatever reason, I could not get any of the computers (one laptop running Windows 7, and one running OSX Snow Leopard) to see the printer wirelessly (works fine via USB). It would always say "printer offline."

Uninstalled an re-installed all printer drivers on all machines (printer is an HP Photosmart C7280 all in one).

The printer network diagnostic page came back clean indicating that everything was connected correctly, but when I pinged the IP address of the printer from the windows machine I'd just be bet with a "timed out" message.

This lead me to think it was something to do with the router, so I bought a $30 D-link router and set everything up again. Exact same scenario. Even after setting the network up with no security options (no WEP or WAP security).

This lead me to do a hard reset on the printer. After booting it up again I ran the network setup wizard (via the printer's LCD screen), and tried to connect to the network. This time however, the printer won't connect the the network at all! I printed the wireless network diagnostics page and it fails the "No Filtering" test. ... Read more

A:Solved: HP wireless printer won't work on new wireless network (I have tried everythi

Read other 7 answers
RELEVANCY SCORE 54.8

 long story shortfirst i thought its an Operiting_System problem, tryed lot of stuff no solutionthought that my device doesn?t have a Bluetooth , meh i can live with that but then i try a bootable Ubuntu USB  , the OS start and Bluetooth icon on top right bar went on\off... by itself until it disappears went to settings activate it , laptop move , it goes off again -whaaaaat- used Wi-Fi bottom to disable then enable , BT went on -yeeeeh- hit slightly  beside it BT on\off but WI-FI is fine  so i want be 100% sure its a hardware problem and not something else like BIOSand any idea how to fix it by myself or should I go to maintenance thanks in advancesorry about my grammar google only helped with translation 

A:T430_s Bluetooth doesn’t work on windows 10 ,but works -with glitches- on Ubuntu

update your windows bluetooth driver .... i also suffering this problem 





Supratimmajumder

Read other 1 answers
RELEVANCY SCORE 52

I know this is not the right way to do it but would like some opinions if this will work

A desktop computer in the house with linksys wireless N router, Works fine can get on with a laptop wirelessly in house and outside etc. I have setup home networks quite a few times. Here is the problem and what I want to do.

Outside about 100 yds away is a steel building with an office. I can take my laptop right out side the building in the truck our out of the truck and get on the internet wirelessly with no problem. Of couse when I get inside the steel building the network won't come through. I thought maybe the signal would come through a pretty big window that is in the office but won't. What I want to do is I bought another desktop for that office and I want to put a PCI Wireless card in it one of those that have a screw on where you can screw a small plastic attenenaa onto it in the back of the computer. I would like to get a small attenena that has a cable on it that would screw onto the wireless card. in othewards mount an attenena on the outside of the building and run the cable through the side of the building and screw it to the wireless card in the desktop. If the laptop will get on the internet right outside the building but not inside can I then use an attenena mounted outside to get the signal and send it through a cable to the card in the desktop? the signal would be picked up outside like the laptop picks it up but be sent inside through the cable. will that... Read more

A:Want to know if this will work for wireless network

I was wondering if this would work it is magnetic so I could put it on the outside of the steel building to get the router signal from the house and then it would go from the attenea to the cable on the attenena to the wireless card in the desktop (this can be screwed right to the wireless card --right?) I dont want to make a mistake is why I am asking

Medium sized magnetic mount antenna for 2.4 GHz

Mobile WiFi is an exciting new thing. Many truck stops, coffee shops, campgrounds, parks and other locations are now offering 802.11 service across the country. This simple 2.4 GHz mag mount antenna gives you 5.5dB gain outside of your vehicle where you need it. You can also use this small antenna as part of your 802.11 wireless system to access your home or company network system from your vehicle. The future of wireless will be mobile applications. This is the highest gain antenna available for 2.4 GHz. The Mobile-5 antenna is only 6 inches long, which electrically produces alot of gain at 2.4 Gig. The strong magnet mount base is capable of holding this small antenna at just about any speed. For a little more gain, please look at our Mobile-7 antenna. For additional integrated connector options, please look at our Mobile-3 antenna.
See full specifications below.
This antenna comes with a 5 ft of cable and connector of your choice.

See full specifications below.
This antenna comes with a 5 ft of cable and connector of your choice.
Note: This WiFi antenna has the followng con... Read more

Read other 3 answers
RELEVANCY SCORE 52

hey guys....i just recently bought a netgear wireless router and pci card. I am having trouble getting an internet connection when i hook the router up. I do everything the setup tells me but when i reset the network and hook up the router it wont connect to the internet. I am pretty new at this wireless stuff so i was hoping somebody would know what is wrong. THANKS!
 

A:Cant Get Wireless Network To Work!

Start by turning off the Modem, the Router and any pc connected . . . then turn on the Modem and let the lights stabilize . . then the router, then one pc at a time to see it they acquire and IP address.
 

Read other 1 answers
RELEVANCY SCORE 51.2

I think I may have deleted a necessary file for my wireless internet to work. Every time I try and search for a wireless network it comes up with this message:

Error loading C:\Windows\system32\van.dll
C:\Windows\system32\van.dll is not a valid Win32 application

Is there any way I can get the file back? Download it or something?

Also, every ten minutes or so a pop-up comes up at the bottom of my screen saying that my Recovery drive is full. What can I do about this?

I have a Dell Vostro 1500, and Windows Vista as the operating system.

Any help with be so appreciated! Thank you so much!!
 

A:Wireless Network doesn't work! Please help!

See error message:
http://www.tech-forums.net/pc/f9/missing-van-dll-176373/

Recovery problem:
http://en.community.dell.com/forums/p/19255756/19422198.aspx
 

Read other 1 answers
RELEVANCY SCORE 51.2

I just purchased a Linksys 802.11g Wireless router for my home so I could share broadband access with my new laptop (Compaq 2500). Prior to setting up my new wireless network, I was running a server of my main desktop. Since I use DSL, I had to build a small client that resolved my ever-changing IP address with zoneedit.com... to make sure the domain name for my server was always pointing to the correct IP address.

Anyways, ever since I set up the wireless router, I can't access my server! The IP always resolves to the one for the router, and whenever I access it, it goes directly to Linksys's router settings page. I've disable the DHCP server that was enabled by default through Linksys, but beyond that, I'm helpless!

Any help would be greatly appreciated.
 

A:Server won't work with wireless network...

Read other 6 answers
RELEVANCY SCORE 51.2

Hi all,
I have a problem with my wireless network. I am running Windows XP home on my laptop(IBM thinkpad R51). I want to create an adhoc wireless network so that I can access internet from my netbook. I do not have any external wireless adapter.

So I installed the wireless adapter driver for 2200BG, then I right click on the wireless network, and I created an adhoc network, with open and no password, my firewall is also disabled. After I click ok, there is still a red cross next to the wireless network. On my netbook I can see the name of the adhoc network I created. When I clikc to connect to it, on my laptop, the wireless network starts to aquire IP address. Then it says 'connected' . However, there are only a few packets being sent , none received. So I cant use the internet on my netbook.

Please help , I have spent over 10 hours over this issue, trying every troublesooting from many websites, but nothing has worked..

Awaiting ....

A:Wireless network doesnt work, please help

bump.. please help........

Read other 1 answers
RELEVANCY SCORE 51.2

I think I may have deleted a necessary file for my wireless internet to work. Every time I try and search for a wireless network it comes up with this message:

Error loading C:\Windows\system32\van.dll
C:\Windows\system32\van.dll is not a valid Win32 application

Is there any way I can get the file back? Download it or something?

Also, every ten minutes or so a pop-up comes up at the bottom of my screen saying that my Recovery drive is full. What can I do about this?

I have a Dell Vostro 1500, and Windows Vista as the operating system.

Any help with be so appreciated! Thank you so much!!
 

A:Wireless Network doesn't work! Please help!

Try this at a command prompt: SFC /SCANNOW

It sounds like the file has gotten corrupted.
 

Read other 1 answers
RELEVANCY SCORE 51.2

Hello. I have a question regarding my home network. I have three computers all connected by one netgear router and two netgear wireless adapter cards (with antennas, but you probably know that.) Well, the network worked well (several weeks) until we did an update on each of the remote computers. Now, it shows that it is scanning through all the channels and not picking up anything. Both are having the same problem and show a red X at the bottom of the screen, indicating the network is down. One interesting thing is that one of the messages suggests that the hardware is not connected, although I can see something is becasue it is scanning with no result. All of our computers run XP.
Please tell me this is an easy fix!
We have uninstalled and reinstalled the card's software already. That didn't help. We even removed the cards and reinserted them.
Networking is something we obviously know NOTHING about.
Thank you so much for helping us!

P.S. This is probably obvious to you, but the computer commected directly to the router is connecting just fine.
 

A:Home wireless network used to work, now down

Read other 15 answers
RELEVANCY SCORE 51.2

i bought my new hp dv2945se laptop from bestbuy last night last night my wireless network did fine now this morning it will not work it has the X over my wireless connection i right click on it and click connect to a network my network is not on there then i click on diagnose why windows can find any additional networks then it says the wireless windows service is not on so i click start windows wireless service then it says windows cannot resolve the problem please contact your network administrator or isp

A:Cant Get Vista Wireless Network To Work

this is the first time ive ever used vista

Read other 4 answers
RELEVANCY SCORE 51.2

i just bought adpater to my computer but it wont connect and i am not sure why ?
It keeps identifying my home network as unidentified, and it continually does "identifying" until it simply say cannot connect to the Internet...

pls help :/
 

A:Wireless network wont work ?

what device are you using this on ?
what windows version?
did you install the drivers

some make and model information would help

------------------------------------------------------------------------
ipconfig /all

We would like to see the results from an ipconfig /all - Please post back the results in a reply here.

If you cannot access the internet with this PC
You will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
If you do not have another PC
Do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries​
For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.
Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)​
For windows version, XP, Vista, W7
Hold the Windows key and press R
Now type CMD
Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​
In the command... Read more

Read other 1 answers
RELEVANCY SCORE 51.2

I just finished building a new PC and installed Windows 7 Home Premium 64 bit today. I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.

Intel i5 2500k - CPU
ASUS P8Z68 V PRO - Mobo
GTX 560 Ti - Graphics Card
8 GB Corsair Vengeance - Memory
500W Antec - PSU

A:Wireless Network Adapter will not work

Did your install the drivers for the mobo? It sounds like there is no LAN driver loaded. What does it look like in the device manager?

Read other 4 answers
RELEVANCY SCORE 50.8

How do I get my Wireless Network Card to work ?

Can I use Windows to operate this Wireless Network Card ?

NB: Following on from my previous post at:
http://forums.techguy.org/windows-xp/912875-no-sound-card.html

Thanks
 

A:Solved: How do I get my Wireless Network Card to work ?

Read other 6 answers
RELEVANCY SCORE 50.8

Hi, Here is the story of my long struggle with this issue.

I have a Lenovo T520 and installed Windows 8 little over two months ago. After the upgrade I started having trouble connecting to different wireless networks ( ATT Uverse at home, Verizon Jetpack 4620LE, Verizon Pantech UML 290 and wifi networks at Starbucks). I can see the SSID but when I try to connect it, it says "verifying and connecting" and errors out. All these wireless networks work perfectly ok with rest of my devices (Windows 7 laptops, MacBook Air, Pro, Tablets etc)

However my windows 8 laptop is able to connect to the two wireless network at work, one is internal and one public wifi for guests. The only difference is our corporate wifi uses Radius servers for authentication where as rest of the wireless networks don't. Here's what I have done troubleshooting this issue so far.

1. Completely wiped the drive and reinstall the OS. Tried connecting to the wireless network with the default drivers and the same issue happened.
2. Downloaded the latest drives for the Intel Centrino Ultimate-N 6300 AGN from Intel's website and tried connecting to the wireless network. Same error again !.
3. Called Verizon to see if there was a problem on their end. Reset the two Verizon 4G cards to factory settings, updated firmware's and tried connecting. Same error.
4. Called ATT and same steps and no luck.
4. Changed Wireless Authentication Type from "WPA2" to "WPA", "WEP" and tried co... Read more

A:Cannot connect to all wireless network except wifi at work

FIPS enabled in 802.11 advanced settings?

Read other 4 answers
RELEVANCY SCORE 50.8

Hello all!

I am requesting help! My knowledge is run out, I can't think of any other solution for my problem. I hope someone can help me.

My problem is that I installed windows 7 ultimate 32x to a old vista laptop. Windows 7 runs really nice and smooth on it. But the wireless function on the laptop and the icon in the right corner is not working. Ethernet is working perfect.

I read somewhere on this site with a case similar, where I look up the name of the driver via device manager and then download it. But it did not work (see picture).

Any ideas? I have Sp1 installed and tried to update everything via windows update. I can't find the motherboards name to update it.

Any help? I am really grateful!
Thanks

A:Cannot get wireless network to work on laptop (not even button)

Have you checked on the NoteBook OEM manufacturer's web site for Windows 7 drivers?

Read other 9 answers
RELEVANCY SCORE 50.8

I have a new iPhone 4Gs. at work I noticed under available networks that there is one labeled 'Free Public WiFi' but when i try to access this i get no where. no error messages come up or request for password. Mainly I'm trying to use this wifi for FaceTime connect with the iphone. I am told that others try to access this network and can't get to the internet either.
What could be the problem? the strength is about 50% but even when I walk to an area that is supposedly FULL strength signal it won't work then either. the DHCP address is:169.254.106.123 subnet mask: 255.255.0.0
 

A:trying to connect to wireless WiFi network at work

Well, you most likely answered your own question. Others that try to connect can't either. I'd suggest that maybe that free public WiFi isn't working.
 

Read other 2 answers
RELEVANCY SCORE 50.8

Hey guys. I have a really weird issue with my Windows 7 Pro 64 bit. Here are the details.

I tried to install a wireless network adapter. The installation appeared successful. Device manager tells me that the device should be working properly. It also shows up as an entry in System Information. But it does not show up in ipconfig/all and it does not even work or scan for network. When I try to use the Window diagnostic tool, it says that something is wrong with the driver.

I've tried two network adapter:
PCIe TP-LINK 450Mbps
USB D-Link DWA-160 Xtreme N Dual Band

My friend tried replacing my hard drive and did a fresh Windows 10 install and the card worked fine. So it is not a hardware issue.

Here are security softwares that I use:
Microsoft Security Essentials
Zone Alarm
Spybot

I am looking for a solution that does not require me to re-install Windows 7. My Windows 7 disc is buried in a pile of boxes.

Can anyone help me to solve this mystery?

Kevin

Read other answers
RELEVANCY SCORE 50.8

I am running a wireless network through my Airport Extreme. Three Macs (MacBookPro [airport admin], G4 PowerBook, and G3 PowerBook) work seamlessly sharing a printer and iTunes. There is also a Compaq Presario laptop running XP Pro -SP2 that can connect as far as internet connectivity is concerned. I can't, however, get the Compaq to find the network printer through Bonjour and also the Compaq can't access my iTunes libraries as the Macs can. Interestingly, the name of Compaq's iTunes library shows on the Macs but won't open. Any suggestions? It doesn't appear to be a firewall issue.
 

A:Getting an XP laptop to fully work on a Mac wireless network

Read other 6 answers
RELEVANCY SCORE 50.8

I've been using the same network configuration for about 4 years now and everything usually works fine. I have 3 desktops in my home as well as a laptop that all share the same internet. I recently replaced my old gaming rig (which is where the modem+router is located at). This new rig works came with vista and ever since then my network has been screwy. All other computers in the house other than mine cannot connect to the network. In fact, the network named "WLAN" doesn't even show up in the list of networks. The only networks listed under the list are the networks of my neighbors.

What's weird about this problem is that all the other computers can connect to the network when the gaming rig is OFF, but not when it's ON.

Built Gaming Rig=Vista
2 Dell Laptops=XP
HP Laptop=Vista

I am using cox high-speed internet (cable) with a belkin router.

Any help would be appreciated, thanks.
 

A:Cannot get wireless home network to work with vista!

All machines are connected directly to the routers switch ports?
 

Read other 2 answers
RELEVANCY SCORE 50.8

Hi I have a old laptop (fujitsu Amilo m1451g) running on just newly reinstalled win xp home edition. I thought I had successfully installed all relevant drivers including intel R pro/wireless 2915abg network connection adaptor. I am getting available wireless connections in my area including my neighbours (which all require a network key and come up in list security enabled wireless networks (WPA) this network requires a network key. when you double click on a neighbours network I get the dialogue box asking me for their network key. My network doesn't have this dialogue box coming up come up asking for network key? Under its name on list it says "security enabled wireless network" but no (WPA) is mentioned on my network. When I click on it it says "if you want to connect to this network, click connect," which I do... I then get "please wait while windows connects to the TNCAPC1F9E1 network - detecting network type". an error message comes back which reads "windows is unable to connect to the selected network, the network may no longer be in range. please refresh the list of available networks and try to connect again.OK". I click on ok. I have refreshed my network list, I am situated near my router, I have reset my router. My new laptop running win 7 connects fine along with my ipad & iphone etc to my router so I cannot understand what is happening here. I have even tried manually adding the network in and I am still not having a... Read more

A:[SOLVED] Wireless Network wont work

Go to Start/Run and type devmgmt.msc and press enter. In the Device Manager any devices with yellow flags need to have drivers installed.Connect computer wired through router, does that connect? If so, Go to the Fujitsu driver page for your model and download the Chipset, Modem and any other drivers you need from the Device Manager. Install Chipset first. Restart computer.
install WiFi inspector and attach a screenshot of WiFi inspector in your next post

Read other 6 answers
RELEVANCY SCORE 50.8

Hi all............I've been reading here for days on how to get my network card straightened out but to no avail....

Here goes.........I have a Dell Inspiron 1525 with Vista Home Premium on it and I formatted it and FINALLY got everything working as it wasn't easy with a broken DVD drive............But NOW I'm having an even HARDER time trying to figure out this problem.........

My Network card is showing up in the Device Manager but has an exclamation mark through it. Ok...No biggie....so I go to update the driver thinking that was the issue and apparenlty that isn't it either as it still won't work. The ERROR code is a 10. My card is a Wireless WiFi Link 4965AGN. Just in case somebody needs the Service Tag it is FCZ2QF

PLEASE can somebody help??

Thanking you all in Advance
Karen
 

A:Solved: My wireless network won't work since reformat......

Read other 11 answers
RELEVANCY SCORE 50.8

Hi
i have a prsario v6000 hp notebook with originally Windows Vista BASIC , BUT NOW I chnaged to XP professional ( V6211 AU )

everything is working ok , except the wireless network , i trid to install Intel PRO (R) wireless network 3945 ABG network connection ..but not working ( yellow ! mark apperas - code 10 error I DEVICE DONT WORK CORRECTLY )
i check that

1. in the device manager Wireless adaptor Intel PRO (R) wireless network 3945 ABG not working

2. tried 2 -3 times to uninstall and reinstall but ....no help

3. in the details its says that " The channel selection for an ad hoc 802.11a adapter is disabled."
my all frnd PC detect the signal but not my pc

can u help me
 

A:Wireless network adaptor dont work

Did you find the correct drivers for that laptop and XP from the HP site? There are some machines that don't have XP drivers available, this may be one of them.
 

Read other 2 answers
RELEVANCY SCORE 50.8

Hi, I'm trying to set up a wireless ad-hoc network between two laptops. One is an HP 530 and the other an IBM T41, both running xp pro. I've tried following guides on how to do this and configured the T41 as the host but it's not showing up in the HP530's wireless network list. I don't know if the laptops wireless is functioning correctly but they are both picking up networks within range from nearby houses.

I had some success when I installed IBM's Access connection on the T41. The T41's network then appeared in the HP530's list but I was unable to connect as it asked for a key which seems to be assigned automatically. IBM's Access connections seems only to allow other thinkpads to connect together. I've now uninstalled Access Connections.

The T41 is connected to the net via an ethernet cable and D-Link DSL-584t router. If anyone could give me some advice it would be greatly appreciated. I've spent hours trying to sort this out.

I did the nbtstat -n ipconfig /all at the command prompt on both laptops.

Computer 1 is the IBM T41
Computer 2 is the HP 530

Computer 1

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Mark>nbtstat -n

Marks wireless net:
Node IpAddress: [0.0.0.0] Scope Id: []

No names in cache

Marks Wired net:
Node IpAddress: [10.0.0.3] Scope Id: []

NetBIOS Local Name Table

Name Type Status
---------------------------------------------
MARK &... Read more

A:Solved: Help, 2 laptops wireless ad-hoc network won't work.

Read other 11 answers
RELEVANCY SCORE 50.4

Hello, i have an ASUS X55VD and the wireless adapter isn't working anymore. I tried troubleshooting, reinstalling the ASUS drivers (Ralink and Atheros drivers), uninstalling and uninstalling & deleting the driver from device manager. I tried uninstalling the antivirus (ESET SS 8). The wired connection is working fine.

How it started giving errors: I left it in Sleep mode for 2 days, unplugged. After this i did a restart and the wireless adapter was off. I turned it on using the Wireless Console 3 (provided by the laptop CD from ASUS), the wireless LED stays constant ON, although in Network and Sharing center, the wireless connection is Disabled. Re-enabling it from there it just says Enabling... -> Enabled but it still remains Disabled. After this i started applying the fixes mentioned above. Whenever i start the laptop now the Wireless is disabled and i don't know what else to try.

A:Wireless Network Adapter doesn't work anymore

I don't want a definite solution, just..i don't know what else to try. Can someone help?

Read other 2 answers
RELEVANCY SCORE 50.4

Hi,

I have 2 computers, 1 wireless modem/router combo and a network that just won't connect. One computer is wired to the modem/router and the other is using a wireless adapter (d-link wua-1340). This computer can detect the wirless network and has been connected but whenever the pc is restarted it won't connect without trouble. I don't even know why it works when it does because i'm not doing anything differant. :S I could really use some help, I wanna play WoW
 

A:Wireless network...plug and play doesn't work

Read other 16 answers
RELEVANCY SCORE 50.4

Just yesterday, my wireless was working. I have not added or removed any programs. Today, my computer shows that my wireless card is working properly but it is not finding any wireless networks in range, which is wrong. Yesterday, while at my apartment, I could see 9 networks, today I see none. When I go to the coffee shop, it does not see that network either. Right now I am sitting at my school and it is not picking up the network in here either. Everyone else around is picking up the network, just not me. I have checked everything and cannot figure out what the problem is.

I have a Compaq Presario R3000Z, running on an AMD Athlon XP Processor (3000+), 800 MHz and 2 GB Ram. Running XP Pro w/Srvc. Pack 2.

My internal network card is a Broadcom 802.11b/g WLAN. I even uninstalled this and rebooted and after reload, it still does not want to pick up any of the networks. Any ideas where I can start? Already tried the program that fixes corrupt TCP/IP drivers (WinSock XP) and it did not work.

Again, nothing was changed prior to this problem. All the settings are the way they have been for the last 3 years.

Thanks,

Vic
 

A:Wireless Network Claims to Work But No Networks In Range

Read other 11 answers
RELEVANCY SCORE 50.4

Hi, The Intel 1030 Wireless Network adapter does not work after Windows 10 upgrade.F12 red light stays on, no troubleshooting wizard can fix it,Microsoft says I'm on the latest intel driver version 15.11.0.7. Model Pavillion dv6-6b50saProduct Code QG797EA I see this is a common problem across HP. Please provide either the correct driver update package or an alternate suported wireless adapter for my issue.Thanks

Read other answers
RELEVANCY SCORE 50.4

Is the Belkin F5D8236-4 wireless router compatible with the xbox 360 network adapter? if not, is there any other way to connect to xbox live without having to plug an ethernet cable directly into the router?
 

A:Solved: Will my wireless network work with Xbox adapter?

If a wired connection to the router works, there's no reason that a wireless connection should behave any different.
 

Read other 1 answers