Over 1 million tech questions and answers.

0x80070570 Error Code on install - One Easy Solution

Q: 0x80070570 Error Code on install - One Easy Solution

If you just want the solution page down .. it's in this blue

New shiny windows 7 disk arrives. ...... doesn't want to install ...

keep getting error message 0x80070570 when Windows 7 is expanding files:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...

Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.

So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.

Always the same thing:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).

EASY SOLUTION:

I don't wait weekends for answers (nor do I usually need to call tech support). One thing we had noticed is that the repair console refused to lauch because it said there was an install in progress. But the support didn't pick up on this and it wasn't until Saturday morning I tried what turned out to be the easiest solution ever.

When you see the error "0x80070570 can't access files" on install click --> Cancel ---> you will be returned to the "Install Now" startup screen and - WITHOUT REBOOTING - just re-start the install.

Second time round it went smooth as clockwork and installed fine.

I have not tried to reproduce this error as I just want a working system :P

Be interested to know if this easy solution works for anyone else. I informed Microsoft of it when their engineer called today and they are going to look into it. They are aware of the install issue but never heard of this fix before.

Crazy B

RELEVANCY SCORE 200
Preferred Solution: 0x80070570 Error Code on install - One Easy Solution

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: 0x80070570 Error Code on install - One Easy Solution

thanks for telling them , they're flooded with all sorts of setup issues (most of which are resolved with hardware removal)

Read other 9 answers
RELEVANCY SCORE 88.4

Hi,

Hope someone can help me with this issue.

I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc.
I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive.
I got the same error code with DVD disc that I get with USB Flash drive.
I formatted HD during beginning of install so there is no OS on laptop...

Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.

I ran a MemTest86 and did a HD Test from BIOS and both passed.

Any thoughts?

Thank you all

gregmy123

A:Win 8 64 Bit Install Error Code 0x80070570

I would rebuild your USB install drive, you might have ended up with some corrupted files. Was this computer shipped with Win 8? if not then you'll need to set up your USB to boot UEFI, IE is has to be formatted fat 32, then on boot up hit which ever key on your computer that brings up a boot menu select you UEFI USB drive
UEFI Bootable USB Flash Drive - Create in Windows
Upgrade Install to Windows 8 or Windows 8.1

However I would use RUFUS to create your install USB thumb drive

Read other 7 answers
RELEVANCY SCORE 87.2

I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.

I keep getting an error message to the effect thatWindows cannot install required files.
...
Error code: 0x80070570Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface

edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.

I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions . . . please . . . ?

ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message

A:Error code: 0x80070570 when attempting to install

Welcome surv1v0r.

Burn the iso again with imgburn @4x speed and try again!!

Good Luck

Read other 9 answers
RELEVANCY SCORE 85.6

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 75.2

Hi heroes,
I can't install win 7 on my brother's laptop. error 0x80070570, file missing or corrupted.
I've seek solution on the net but nothing seems to work.
Laptop decription: ACER Inspire 7250, AMD proc. 64bits,8 Go RAM, HDD 500 Go, 3 partitions : 1.PQSERVICE(OEM) with windows and drivers 2.System reserved 3.Principal
What I tried (I used 8Go USB card with windows usb download tool):
- format principal drive and install clean windows -> format ok, install failed at 4% code 0x80070570
- use (shift) + alt + F10 at startup to reset at factory default -> nothing happened
- download another iso of windows -> same error
- try another version of windows -> same error
- verify integrity of all memories -> errors found on the HDD clusters moved in quarantine -> same error
- plug the HDD on my desktop and try install windows -> same error
- format and delete all partitions on the HDD, except the RECOVERY OEM reserved and create new clear partition -> same problem
No more ideas... please help

A:Unable to install win 7 (code 0x80070570)

Try another flash stick or DVD using the ISO and tool to burn to disk/stick in Clean Reinstall - Factory OEM Windows 7 which steps will assure you get and keep a perfect install. Since Acer Recovery will not run after a Clean Reinstall to C, delete all partitions during the booted install.

If this fails work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums reporting back any failure by when it happened and any error or other behavior.

If these fail test your hard drive using the maker's HD Diagnostic extended CD scan, followed by another Disk Check run from installer's Command Line on the full disk partition you created.

Read other 7 answers
RELEVANCY SCORE 73.2

I tried to update my son's laptop with the latest "Cumulative Update for Windows 10 Version 1607 (KB3213986)", but after downloading the update I got : Error code: (0x80070570). The same thing happened with the December Cumulative Update and I thought that Microsoft would fix this in the January update? Apparently not. At all other computers at home there was no problem with the update. Any solutions?
 

Read other answers
RELEVANCY SCORE 73.2

first of all sorry for my bad English..

I have downloaded windows8 developerPreview-32bit-English (2.8 GB) successfully..
made a bootable USB and tried to install (fresh install).
when it comes to expanding files at 57% it gave error code:0x80070570 and tried again.
same error..
tried to install on VMWare, Virtual Box directly with ISO..
same error.
on the other system with different configuration..
and again same error..

so, i searched on google. only the solution there may be problem with ISO is to re-download ISO..
but my net speed is very very low (download sppeds upto 12 kbps).
i downloaded it 2.8 with great difficulties.. (took 5 days to download.)

i can't download it again..

is there any alternate solution like rebuilding the ISO with working files.
is it possible to know which files of ISO are corrupted and replace them with working files..

pls help...

A:error code : 0x80070570

Sorry, but your best bet is to redownload. good luck.

Read other 5 answers
RELEVANCY SCORE 73.2

Get this error code 0x80070570
cant remove any programs or files
Windows 8.1
HP PC

Read other answers
RELEVANCY SCORE 73.2

Trying to install Windows 7 Pro and I keep getting the error code 0x80070570.
I have tried everything from removing ram, clearing BIOS, jumper configs, re-downloading the software, slow burn...etc...
Can someone help me please

A:How do I fix 0x80070570 error code??

Fill in your computer specs. Since it's a custom build, include the motherboard make and model.

Read other 5 answers
RELEVANCY SCORE 73.2

I keep getting the error code: 0x80070570, cannot locate file, installation will now be cancelled.  This is Windows 7 Home Premium-32 bit.  I'm trying to do a clean install. Please help.

A:Error Code:0x80070570

Hey,in my view, this kind of problem is probably caused by the culprits as follows: 1.memory installation issue : try to check the installed memory situation on you motherboard and fix it if it has come adrift. 2.driver confilt : update some unsuitable driver to the latest version.

Sometimes things happen that are just out of your control.

Read other 5 answers
RELEVANCY SCORE 72.4

I get the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have windows Vista Home edition and I am trying to install either Windows 7 Home premium. I have the requirements it takes to put windows 7 on a computer. You can post on this thread to help me or if you need to email me for some reason it is [email protected]
 

A:error code 0x80070570 When installing win 7

Read other 6 answers
RELEVANCY SCORE 72.4

I keep getting error code 0x80070570
An unexpected error is keeping you from creating the folder. If you continue to receive this error,you can use the error code search to help with this problem

any suggestion to fix would be appreciated
Thanks
D

A:Need Some Help New To Windows 8 Error Code 0x80070570

When do you see this error message? Is it during install or while using Windows 8?

Read other 5 answers
RELEVANCY SCORE 72

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

A:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

Read other 5 answers
RELEVANCY SCORE 72

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

Read other answers
RELEVANCY SCORE 72

I used to run windows 8.1 x64 but I had to reformat because I thought that would've fixed my problems installing windows 10. When I tried to install windows 8.1 x64 again it failed and got the 0x80070570 error. I also tried windows 7 64bit and windows 10 64 bit but I got the same errors. 32-bit OS installs fine though. Of course all my attemptse were clean installs.

Read other answers
RELEVANCY SCORE 72
A:Error code: 0x80070570 during installation 7100 x86

As I have just posted on another thread put the iso back in utorrent and force a recheck. The same thing happened to me a couple of weeks ago and it turned out the iso was not complete. If it is complete try burning at slower speed.

Read other 4 answers
RELEVANCY SCORE 72

I'm new guys so bear with me.

Just built a new rig, specs are in my bio but long story short I'm trying to install w7 fresh onto a sshd from a usb. When it gets to 15% during expanding windows files it gives me the error code 0x80070570. so here's what I've done: ensured sata settings are set to ahci, used different ram in different slots on mobo, format hd in cmd with diskpart, made sure ram settings good in uefi, redownloaded Iso file and reran program to make usb drive bootable. Currently I'm using the clean all command in disk part and then going to try and partition the drive. Should I be partitioning for the ssd? Is there something else I'm missing with the hybrid drive? I've been working at this for about 2 days and could use some help. Thanks in advance

Read other answers
RELEVANCY SCORE 71.2

I have installed Win 8.1 in some different way than normal. I have sysprepped Win 8.1 in VMware and then saved a image using Clonezilla. When I installed/copied this image to a new computer I removed admin account - before that I have created another admin account with another name. I have RAID array which is my D: partition and when I tried to download file using utorrent it gave me - error the disk is unreadable or corrupted. If i try to copy one file in D: it gives also same error with code 0x80070570.

Read other answers
RELEVANCY SCORE 70.4

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

A:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 70.4

For the last few days, the system BackUp on my external hard drive is getting failed with error code 0x80070570 after completing nearly 95%. The backup consists of system images and other folders that windows automatically choose. Even when trying to run backup without the system images, the backup fails. As per my findings, the 'AppData folder' in additional locations is creating the problem as removing it from backup settings does solve the problem. But this problem didn't exist a few days ago and while letting windows choose what to backup, brings back the problem. How to fix it?

A:Unable to complete System BackUp, Error Code 0x80070570

Hello UrAshish mate maybe it is worth running a test on that drive because that error code covers other issues that come up on a Google.

SeaTools for Windows | Seagate

Read other 3 answers
RELEVANCY SCORE 70.4

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

A:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

Read other 9 answers
RELEVANCY SCORE 68

I am getting the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have Windows 7 Pro OEM 32bit. I have the requirements it takes to put Windows 7 on a computer. I have tried two different discs same results. System is custom built, with Gigabit GA-H55M-S2H motherboar, Intel core i3, 4gb Memory, 500gb hdd. It gets past the part of coping files and then comes up with the Error code of 0X80070570. I have tried to install several times using two different discs and allways the same result.
 

A:Error 0X80070570 in WIN 7 Pro Install

Read other 7 answers
RELEVANCY SCORE 68

Hi everyone. First post here because I?m getting really frustrated with this error message. Error code: 0x80070570. I?ve tried searching around on the internet for a fix but I?m not coming up with a lot that pertains to my situation. I am clean installing a copy of Windows 7 professional x86 on an HP DV6700 laptop. This is an actual release copy obtained through Microsoft store front download. Everything works great when booting from the DVD until it starts expanding files. It has gotten as far as 49% before giving the error. Always seems to be a random number, I?ve tried probably 4 times.
I am positive that the disc is not corrupt because I installed Windows 7 without any problems using the same disc on my desktop. I have deleted every partition on the HP except for the recovery partition it comes preinstalled with. My next option is to delete this too but I would rather not. Anyone have any ideas how to fix this issue?
I also have another semi-related issue that I would love input on if anyone has any idea. After Windows 7 was unsuccessful I attempted to recover Windows Vista using the recovery partition. Everything installed fine until it tried to reboot. Now I get an error message ?Missing boot manager? and only an option to restart the computer. I?m afraid this is going to happen even if I get windows 7 to install so any help would be greatly appreciated. Thanks!

A:Install error 0x80070570

Hello rjw24. Welcome to sevenforums.

Please inter your system spec`s. you will fin it at the left hand side bottom of your post.

0x80070570 error code means that a file or a dir is corrupted.

Have you ever installed window 7 in this computer before??
If yes, format the 100mb partition before reinstalling windows 7.

Read other 9 answers
RELEVANCY SCORE 68

Been getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install before it errors out and then restarting, all without luck. Anybody have any other ideas? Using a Maximus IV Extreme Z, no overclock.

A:Win 7 0x80070570 install error

Use 2gb of RAM for install. Test your RAM using memtest86 for 5-6 passes or overnight. Then when known good, test good stick in all slots to test slots: RAM - Test with Memtest86+

Where did you get the ISO? Try slow burning DVD at 4x speed with ImgBurn once you confirm the ISO hash against official Win7 HASH: Windows 7 RTM SHA-1 hash - checksums.
Win7 SP1 hashes are on TechNet Download page under details for each download and accessible even if not subscriber.

Next try writing ISO to flash using this simple tool with Win7 in dropdown: Universal USB Installer – Easy as 1 2 3 | USB Pen Drive Linux

Next check for BIOS update for mobo. If none, reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS.
While in BIOS setup set SATA controller to AHCI to try install.

Next try wiping the HD for possible boot corruption: SSD - HDD Optimize for Windows Reinstallation

As a last resort, move HD to another computer to install. SysPrep install before moving back to problem computer: SysPrep to move HD to another computer

Read other 9 answers
RELEVANCY SCORE 67.2

I tried installing Windows 7 64bit on my new build (new HDD) everything was going as expected, but when it got to about 10% "expanding files" I got the error msg in title. When I clicked "ok" it took me back to the "Intall Now" screen where I figured I'd click that again (no reboot) and went through the steps until I got to the "Where do you want to install windows?" part. However, it now shows to locations instead of just one.

Disk 0 Parition 1 System Reserved 100MB total 86MB free System
Disk 0 Partiion 2 596.1MB total 594.1 free Primary

Where do I go from here? BTW, it is the Full Retail version I just bought!

MB Asus P7P55D-E Pro
Intel i5 760

So much for my Saturday gaming fun:(

A:windows 7 install error 0x80070570

Hi -

Wipe the HDD completely with KillDisk -
- http://jcgriff2.com/0x1/killdisk_imgburn.html
- http://www.techsupportforum.com/2789807-post8.html

Try Windows 7 installation again.

Regards. . .

jcgriff2

`

Read other 4 answers
RELEVANCY SCORE 67.2

I do PC repair for low-income people in our neighborhood, and I was brought a Dell Inspiron 1520 running 32-bit Vista.

It wouldn't boot, even with safe mode, and when I booted from a disk no OS displayed.

I ran a utility that scans for and 'fixes' bad sectors (I assume that it merely makes them unwritable). There were 17 bad sectors that could not be fixed. I used another utility and ran a low-level format.

Hours later I used a Dell Vista CD and attempted to install Windows. Some time before it hit 100% on step 2 (Expanding Files) it gave me the 0x80070570 error. I know there's nothing wrong with the disk, but I tried it again and got the same results. Then I tried an install using a MS Windows CD, which did prompt me for the product key, but when it got to the Expanding Files step it just styed there at 0%. For hours...

Is the drive just too far gone to sustain the OS? I thought that if you did a low-level format it rendered the bad sectors as unusable, but this is a 120GB drive. They really can't afford a new HD. Shouldn't I be able to install and run Vista on the 100 plus gigabytes that are uncorrupted?

A:Install from Dell CD - 0x80070570 Error

To me it sounds like a bad hard drive and not just a few sectors.

Test Hard Drive

Harddrive scan usings SeaTools - SeaToolsfor Windows | Seagate - Both long and shorttests

Read other 3 answers
RELEVANCY SCORE 67.2

Hi,

I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails.
Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either!
This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
Anyone managed to resolve this problem?
BTW, I am installing x64 versions...
Thanks

A:Win7 install error 0x80070570

  
Quote: Originally Posted by Dubya


Hi,

I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails.
Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either!
This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
Anyone managed to resolve this problem?
BTW, I am installing x64 versions...
Thanks


Make sure you take your computer CPU and memory overclocks back to original specs. I can install by x86 without any problems but always have to take off my overclocks when I install or upgrade my x64 versions.

Read other 9 answers
RELEVANCY SCORE 67.2

Hi,
I've just bought an Asus X201E. I got the linux version, because as a student I get a free MSDN copy of any Windows OS... Long story short, I've been trying both Windows 8 32/64bit and Win 7 32 bit, all of them dosplaying an error during unpacking system files in the installation process @32-42%. I've tried everything, switching the SATA mode to IDE, rebooting, switching flash drives, etc. Since there are X201E models being sold with Windows 8 I figured there would be no problem installing it? Help please, it's really driving me mad..

A:Can't install Windows 7/8, error 0x80070570

Welcome to EightForums.

All Linux code must be deleted using the CLEAN ALL command.As you have had linux on the HD you need do a Clean all & full format.

Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 67.2

I'm trying to install windows 7 on my asus p4p800se 3.2ghz, 3.0gb pc3200/400 ddr ram...no matter clean install or upgrade options when files extracting at 20% usually i get this error (0x80070570) i can install winxp home no issues, no worries, stable works fine same settings/setup...i'm ready to keep winxp if i cant figure out a solution. maybe someone has similar issue that was resolved...thanks!

Read other answers
RELEVANCY SCORE 66.8

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

Read other answers
RELEVANCY SCORE 66.4

File downloaded form a secure place, burned at 1x speed. Downloaded the file 5-6 times burned 10 or so discs.

CRC errors possible hardware config, RAID?

SEE here: http://forums.techguy.org/hardware/806033-crc-all-exe-zip-rar.html
 

A:Solved: Win7 install error 0x80070570

Read other 9 answers
RELEVANCY SCORE 66.4

well then, i think no one will ever able to solve my question ....

A:Cant install win 8 (error:0x80070570) on new tosiba laptop

How far are you actually getting because "when in the middle of installing" doesn't help much. Are you getting to the point where you can "delete existing partitions?" If so, are you wiping the drive clean (erasing all existing partitions) before proceeding?

Read other 7 answers
RELEVANCY SCORE 66.4

Every time i try to install windows7 it shows 0x80070570 error.
my pc conf :- 2gb ddr2 ram, duel core processor , 500 gb hdd , os xp2,

A:0x80070570 error showing when trying to install windows 7 !!!!

What is the make and model of your PC?

Try going into bios drives change the drive to RAID Autodetect (ATA) if it is already set to RAID change it to AHCI. Hit F10 to save the changes the try to install Windows again.

Make sure you unplug any USB drives, only have your vga (Monitor) plugged in and your keyboard and mouse when installing Windows.

Try using the Windows 7 Advisor to see if your system is compatible with Windows before upgrading. The link or button is below the install button.

Read other 3 answers
RELEVANCY SCORE 66.4

Hey Sevenforums,

About a year ago I decided to build my first computer. I did so and there was much rejoicing. That is until it started BSODing everywhere when I played video games or watched Netflix.

Coming to your forums I was encouraged to do a memtest, got new RAM, for a while the problem was fixed (provided to used only one stick on the MOBO) and there was much rejoicing.

Then the BSOD's came back. I believed it to be the motherboard (an ASROCK extreme3 Gen3 Z68) and so I went a purchase a new one. Unfortunately the Micro Center sales person sold me an mATX which I didn't even notice... but I'm attempting to do a fresh install of windows 64 bit professional.

At first I was getting an error that said I couldn't install windows on a GPT hard drive. After deleting all partitions using the Windows Install Interface, I was able to create a new partition and attempted to install and that's where I am now. Sitting here with this 0x80070570 error code. I've googled it but none of the solutions I've found were of any use.

Additionally, after attempting to boot my computer up post-installing everything to the new motherboard the computer wouldn't go to a splash screen. When I removed my GTX 680 (EVGA) card it went to BIOS and posted just fine.

Any help would be appreciated... Thanks!

Update: I attempted to use Disk Part in Command Prompt to clean all disks, but that didn't work, saying a clean is not allowed ont he disk containing the current boot. So I truly am stuck. I ha... Read more

A:Fresh Install (due to new MOBO) Error 0x80070570

Well, for anyone out there who finds this, I solved the issue. I ended up swapping the new motherboard with my old one, but changing the RAM. This resolved the issue and allowed me to install Windows cleanly with no errors. Not sure why...

Whether the new ram with the original mother board will prevent the BSODs... time will tell. Good luck, and sorry for the forum pollution.

Read other 1 answers
RELEVANCY SCORE 65.6

Windows 10 Repair Install Error 0x80070570 - 0x2000C

The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation.

So, I want to do a repair install. Have tried many times and keeping getting this error.

I have run sfc /scannow, and Dism, both report no errors.

I have searched here, and tried the install using English and English International ISOs (extracted). Both report the same error. It appears on the first reboot, about 2% into the install.

The install is onto a SSD, which was migrated (a few months ago), using Paragon Hard Disk Manager.

Look forward to your replies, thanks in advance.

Read other answers
RELEVANCY SCORE 65.6

Hey guys I just built a PC and tried to install windows 7 ultimate.
Specs:
-i5-3570k
-gigabyte ga-z68-ud3h b3
-8gb ram
-sandisk extreme 120GB ssd
-coolermaster 525W extreme PSU
Seagate 500GB storage drive

I first tried the DVD and got this error:

I assumed it was a corrupt DVD. I then downloaded the ISO from Microsoft and installed on a USB. I got the same Error. Re downloaded and reinstalled, same error. I looked online and found out it could be a ram error. Tried one stick, tried different slots, tried completely different brand of brand new ram, all to no avail. It always goes to 9% then gives the error. Any ideas?

A:Cannot install Windows 7 on newly built PC (Error 0x80070570)

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS: if UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with, or enable Legacy BIOS or Compatibility Support Module. Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt.You are creating the partition here for the purpose of marking it Active which overcomes... Read more

Read other 1 answers
RELEVANCY SCORE 65.6

Hey guys, self taught and "usually" self fix but this one has me stumped. Wife has an Acer Aspire One Nav50 netbook running an Intel Atom Processor 1660.0 MHz, with W7 starter. She has had it a few years & like the rest it had started to slow down. I have a genuine ISO of W7 Home Premium mounted on flash drive in boot configuration that I have used on an older laptop that worked without a hitch so I know it is a good copy. Ran DBAN(beginning to think that was my mistake) and went to install 7. Everything goes good until it gets to % count up and 20 is as far as it ever gets. Let me list what I have done so far:

>ran check disk on the hard drive-no errors
>made a bootable flash drive w/memorycheck86 and ran it for 6 passes(around 4 hours) no errors
>decided to try new memory anyway, upgraded to 2 gig stick(only 1 slot, 2gig max)-no luck
>tried the "stop install before the error and go back to install w/o reboot" trick-no luck
>deleted the drives at advanced at beginning of install-no luck
>tried to format the install drive-no luck
>ran "disk part" from command prompt as described on this forum-no luck
>reset the bios to factory-no luck
>reset the SATA mode in bios from AHCI to IDE-no luck

Think I should go buy a lottery ticket tonight?

Been on this for 12 hours, is there anything that I have missed?
7 Forums has always been my "go to" for fixes, that's why I joined to post this!

Thank... Read more

A:Install error 0x80070570 on Acer Nav50 after DBAN

Is it possible you only ran the flash stick installer from Windows before and haven't yet relied on it to boot to install? It sure sounds like a bad installer.

Just in case try another ISO for your licensed version written to stick using the ISO download and MS tool from Clean Reinstall - Factory OEM Windows 7. The steps there will also assure you get and keep a perfect install, even for retail.

Set the SATA controller to AHCI, set HDD to boot first, trigger flash stick to boot using Acer F12 or F10 key at boot. Clean Install Windows 7

If that fails try DVD install using same tool to burn DVD.

Read other 2 answers
RELEVANCY SCORE 64.8

Hi there,

So I have spent the last few days troubleshooting the problem, I have tried most of the solutions I have found online, but still I get the 0x80070570 error at 14% of the install process. I have reformatted the hd prior to trying as well.

some random observations:
I have run hd diagnostics and everything passed
I notice that in the BIOS setup utility that there are 3 SATA HDDs listed though I only have the one 'internal one' and no peripherals
I have downloaded and burned (and burned to USB) the .ISO file about five times with the same result
I haven't tried removing RAM because I only have one chip (4 gb) and I assume I cant have 'no' RAM to proceed

As I am sure you can imagine, it is driving me absolutely crazy.

Any help would be hugely appreciated, even on Christmas Eve!

Thanks for reading,

Tathama

A:clean install failure (0x80070570 error) on a lenoveo t410s w ssd

Unplug all other HD's and peripherals,

Boot into BIOS setup to enable Legacy BIOS if present. Next check BIOS Boot order for an EFI Boot Disk and if present remove it, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

Read other 9 answers
RELEVANCY SCORE 61.6

I am a beginer to Java (im writing my first program for a class) but I can't seem to figure out a syntax error. Here is some stuff for background. I am using Eclipse 3.0.1 IDE and I downloaded Java 5 Update 1 JDK from Sun and installed both (note I installed Eclipse first, not sure if it matters). Windows XP SP2.

Eclipse is showing this error... Syntax error on token "(", ; expected
Syntax error on token ")", ; expected
for the following code.(line 21)

The IDE underlines the () that I put in RED and says the error is there. I don't get it because I don't think I need a ; anywhere. (and this code is copied directly from my prof's website)

Thanks for any help, really really new to java, I hope it is something simple.


Code:
package edu.uwec.cs.muellerzabel.conversion;
import javax.swing.JOptionPane;


/**
* @author MUELLERJ ZABELJJ
*
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
*/
public class Convert {

public static void main(String[] args) {
private static double getDouble[COLOR=Red]([/COLOR]string prompt[COLOR=Red]) [/COLOR]{
double x = 0;
boolean done = false;
while (!done) {
try {
x = Double.parseDouble(JOptionPane.showInputDialog(prompt));
done = true;
} catch (NumberFormatException e) {
JOptionPane.showMessag... Read more

A:Syntax Error in Java, Eclipse 3.0 (im sure its easy solution)

Not sure if this is the problem, but it should be "String prompt" not "string prompt"...try that.
 

Read other 1 answers
RELEVANCY SCORE 57.6

Hi Can anyone advise me of the best route to fix my Desktop H500s which has started showing an error code:error 1962 No operation system found.....Bearing in mind I am not technically minded at all and would probably need professional help to rectify this problem.... Many Thanks

Read other answers
RELEVANCY SCORE 57.2

hi guys...
today i had a lot of trouble while trying to update my programs...
my windows defender didn't work correctly and reported error code 80070424...
and i couldn't set my windows to update automatically...
i searched internet for a couple of hours and then i found solution wich someone posted, somewhere... and fixed it....
now, i'm happy as a little child...
so, now i'd like to help you in case you have the same problem...
here it is...it's copy/paste...


Lena" wrote:

> Thanks a lot.Your solution was very helpful!!
>
> "GC" wrote:
>
> > If you have Vista and you have this problem the solution is actually very
> > easy...
> >
> > 1) click Start, then All programs, then Accessories
> > 2) Right click on Command Promt and select run as Administrator
> > 3) At the command prompt enter the following
> >
> > %SYSTEMROOT%\SYSTEM32\REGSVR32.EXE %SYSTEMROOT%\SYSTEM32\WUAUENG.DLL
> >
> > It should pop up a window saying the .dll registration succeeded and thats
> > it!
> > All fixed
> > Hope this helps...
> >

Read other answers
RELEVANCY SCORE 57.2

I notice a few people have already posted re error code 641 and not being able to install certain updates. Currently I can't install Windows Security Updates KB2690729; KB2656405; KB2604121; KB2604111. However other updates are installing okay. Amongst other things, I tried a system restore - but I couldn't see a way to date the restore point earlier than 10th May. The problem predates this time - probably first occurring around 7th or 8th - so, not surprisingly, this effort made no difference. Might a restore work if I can go back further? - and, if so, how do I manage it? Better yet, has anyone come up with a solution to this 641 problem that has actually worked? I've tried several auto fixes, plus various other suggestions I came across here or on other sites, but nothing helps. If the 4 updates in question weren't "important" I'd be tempted to just hide them - as subsequent ones seem to be installing okay. Mind you, I've a feeling this problem will only crop up again if ignored. It's driving me mad. I'd really appreciate some help/advice. I'm fairly crap (blonde) with the technical side of things so the simpler the instructions so the better chance I'll have of following them.
Cheers in advance. LF

A:Any solution yet to error code (80070)641?

Welcome
When you see the dates, bottom left, if there are more dates it will say check box to show more dates.

Read other 3 answers
RELEVANCY SCORE 56.4

Hello all, I have been getting a BSOD STOP error of c21a, Code 0005. Does anyone know how to fix this issue? I have run the Recovery Console and CHKDSK /f /p under it. I also ran FIXMBR tool to no avail. Thanks.

JCH
 

A:Need solution for STOP error c21a, Code 5

Take a look at this Microsoft Help and Support article.

BTW, chkdsk does not use the /p switch. Instead, /r was the switch you were looking for. Just chkdsk /r. But I do not think that would have fixed your problem anyway.
 

Read other 1 answers
RELEVANCY SCORE 56.4

Well, I installed Vista Ultimate x64 the other day, and I've been tinkering around trying to figure everything out (I know not to touch settings that I don't know what they do lol, but I am advanced enough to know about 98% of what everything does...) anyway, here recently it WILL not detect USB mass storage devices of ANY kind.
I plug it in and it says the drivers could not be installed, it knows the name of the device, and what it is... but the drivers will not install it returns an error code "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)"
which I of course google and return MSDN pages on what thats about and read up... all of the solutions they note there do not fix the problem...
anybody know whats up?
I am unsure if its directly related to x64 vs x86, however I know that all of my hardware (board, vid card etc... ) are all x64 ready and Vista ready...
Maybe some setting got screwed up or something, I dunno, but I got 2 flash drives and a 40gb external drive that aren't doing me much good ATM... help would be MUCH appreciated...
 

A:Solution to USB error code found, just need help finishing it.

The error code I receive is
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
I have tried every solution on the net except ONE, however I do not know the name of the USB device service (more specifically for Mass Storage) in the Registry. The idea is that the registry value for START has been changed to either 3 or 4 instead of 0, 1, or 2; 3 is Manual and 4 is disabled, 0 is SYSTEM (at kernel boot), 1 is SYSTEM (at login), 2 is AUTOMATIC
Default is 2 for this type of device, any idea where this service is in the registry?
 

Read other 3 answers
RELEVANCY SCORE 56.4

I got this error code when checking for updates for Windows 7 ultimate.
After a search online I found several solutions to the problem but also found them all to be very time consuming and complicated.  So before selecting one of them I decided to try a simple trix that have worked in various problem situations.
And it worked also to solve this problem.
I went to settings in windows security essentials and disabled live protection.
Then I checked for updates and it worked perfectly.
Just wanted to tell about this since I see many people have run into this same problem.
And remember to run a scan on your pc when you have installed your updates and to enable live protection again.

Read other answers
RELEVANCY SCORE 56.4

MicroSoft tell me that Error code 0x80070005 with all its causes and variants is nothing whatsoever to do with them, the ‘Company’. Well it wouldn’t be their fault, would it, when considering all the many tens of thousands of near £50UK charges they make from each Customer to remove it.
The instance that afflicts me is as follows: Using ms Windows 7 and wishing to conduct a Clean or an Upgrade ( saving files and programs) – the ms CD presents an Install Window – followed by Setup – but a displayed window then appears with this text
>> “Window was unable to create a required installation folder
Error code 0x80070005<<.……… Not further progress is possible.

In spite of an extensive search of the Web over a long period of time I have not located any useful and workable solution.
It is unwise to utilize commercial sites which purport to provide a solution. You run the risk of being inundated with associated error and cleaning software apart from a probability that a purchased program will fail, followed by a refusal to refund the software solution cost.


It is alarming that with all the extensive know-how and computer specialisation “Out There” that I cannot find a single source solution for my difficulty…….

Or am I mistaken!.......Please Help.
 

A:Impossible MicroSoft Error Code Solution

Read other 13 answers