Over 1 million tech questions and answers.

wireless keyboard and irq assignment

Q: wireless keyboard and irq assignment

i've just bought a microsoft wireless desktop 1000 mouse and keyboard package, and while the mouse works perfectly well, i can't seem to get the keyboard in order. for a start, i get the 'no keyboard detected' error message during the boot sequence; then, when i boot up having plugged in my old PS/2 keyboard instead (then unplugged it obviously), i find that only the 'start', 'alt' and one or two other keys work on the new wireless keyboard....why would that be?!

naturally i want the new keyboard to occupy the IRQ1 slot, but xp (sp3) doesn't allow you to manually reassign....even if i try reinstalling the new keyboard, no luck. it's not even as if i have a lot of peripherals installed to take up all my IRQ addresses. is there some way i can tell my bios to accept a wireless usb input device as the default keyboard, and hence give it the IRQ1 slot?

of course the keyboard manual and microsoft online help are no use - i can't even find any descriptions of the same problem on this and other forums. does anyone have any advice how i can get the new keyboard working? or just any suggestion to keep me occupied rather than tearing my hair out? infinity thankyou's in advance!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: wireless keyboard and irq assignment

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 58

i have 3 t410 laptops one with no screen and the power button went bad on the keyboard that is currently on it. i had gotten it to boot up a time or 2 by touching the 2 end contacts-one on each side- together but now there is no response from that. my plan for this pc is to sit on a docking station connected to a 50" flat screen to use netflix and the kodi app. will be running mint on a ssd so basically i want to use it as a firestick with 8gb of ram. i have wireless key boards, ect. so my plan was to just solder a wire to each pin and just touch them together to boot up as this will stay on 24/7. eventually i will replace the keyboard when i find another deal on ebay for another t410 for parts. i have not been able to find anything designating which pins connect to what. any help will be much appreciated!

Read other answers
RELEVANCY SCORE 58

So I bought a new keyboard but it is the same, the solution that I found for the l, 'T is another plug in to usb by usb!
Not very convenient for a laptop ..

Tell me where it comes from and if there is a solution. Thank you

Read other answers
RELEVANCY SCORE 56

Sorry for my English, this is an automatic translation.Can you change the assignment of the keys of my keyboard by other letters or signs present on the virtual keyboard (example: Euros) ? My X1 Yoga has a touch screen.The Sharpkey software does not succeed and believes that my keyboard is Querty type while my keyboard is Azerty type.I thank you while waiting for an answer.

Read other answers
RELEVANCY SCORE 43.2

someone please help me.. i dont know what happens to my wireless keyboard(im using usb mouse). i cant typing. just play/pause, next, previous vol up, vol down and mute.. 

Read other answers
RELEVANCY SCORE 42.4

Yesterday I bought a Wireless Internet Keyboard And Wireless Laser Mouse from the Brand:Micro Innovations and I did everything it said but when im about to install the software I leave the non wireless mouse that I used to have plugged in to install the software... so I install it and the wireless keyboard works great but the wireless laser mouse doesnt work... any suggestions....PLEASE HELP
 

Read other answers
RELEVANCY SCORE 42.4

MS Wireless Comfort Keyboard/mouse combination, Model 1.0A -1045 is malfunctioning in the operation of the keyboard. The mouse is working, so my thought is that the receiver is okay. The keyboard stopped working today. I replaced the batteries, reset the button on the bottom of the keyboard and the button on the receiver, ensuring the proper sequencing. Still no joy. Removed all of the screws on the bottom of the keyboard, carefully checked the membrane inside, ensuring cleanliness before re-installing. Still no joy. I visited the MS support website. Unable to locate my brand. Thinking that downloading a new driver might help, i checked my settings for device drivers in My Computer. All drivers seem to be okay according to My Computer>Devices>Keyboard. Searched a couple of other forums and found that others have experienced the same problem. I've misplaced the software that came with the set-up. MS support website no help in trying to find software for this particular model. Any ideas from you Win7 gurus? Many thanks in advance.

A:MS wireless keyboard not responding to keystrokes/wireless mouse works

Have you run Windows Updates and see if it offers a new driver.
The keyboard is very old. Just might be time for a new one. You could also go to Device Manager and select update driver for the keyboard.

I have 6 or 7 old keyboards. Also gave a few away. I have never wore one out. Just kept buying them looking for one I really liked.
Years later I found one I like.

Read other 5 answers
RELEVANCY SCORE 42.4

I had to replace my keyboard after 3 1/2 yrs since the keys were sticking and the letters worn off. I bought the Microsoft Wireless Laser 6000 Mouse with the wireless keyboard. It works great with one problem. If I enable "allow this device to bring computer out of Standby" for either the mouse or the keyboard, the computer never goes into a full standby. The fan is always running and so are some other parts of the computer. If I dont configure the mouse or keyboard that way, the computer will go into regular and complete standby but will need to be turned on with the power button to bring it out of standby. The Receiver is USB so Im thinking the reason the computer doesnt completly power down is due to the receiver needing to be active. Is there a work around or do I just stick with using the power button?
 

A:Microsoft Wireless Laser Mouse and Wireless Comfort Keyboard

I'd stick with using the power button
 

Read other 1 answers
RELEVANCY SCORE 42.4

my wireless keyboard and wireless mouse stopped working. have tried disconnecting them many times even making them disconnected for at least 25 hours but still not working. new batteries inserted and still the problem exists. i need help. the keyboard light is green as it normally is. I need help urgently please for anyone who can help.

A:synchronising wireless keyboard and wireless mouse to a packard bell pc

Hi and Welcome to TSF!

What is the make and model number of the wireless equipment? Do they function on another PC?

Read other 2 answers
RELEVANCY SCORE 42.4

my wireless keyboard and wireless mouse stopped working. have tried disconnecting them many times even making them disconnected for at least 25 hours but still not working. new batteries inserted and still the problem exists. i need help. the keyboard light is green as it normally is. I need help urgently please for anyone who can help.

Read other answers
RELEVANCY SCORE 42.4

My wireless keyboard (FQ481AA Wireless Elite Keyboard) will not pair with my computer. The mouse is working fine. I updated the drivers. The instruction manual is only 2 pages long and doesn't say how to pair the keyboard with the computer.  I tried using the pair button on the back of the keyboard. Nothing. 

A:Wireless keyboard pairing problem: FQ481AA Wireless Elite Ke...

I recently bought the HP Elite Slice which came with the ERK- 321A wireless keyboard and the wirelss mouse, so when i plugged in the computer and swithced it on they were not paired, so i plugged in another mouse and keyboard via the USB ports and have been trying pretty much daily to get them to air up, which i am finding impossible. i paired pretty much every item in our house, BOSE soundbar, Samsung TV, Blur ray player, phone etc but these two items never show up in the list, i am pushing the connect button on both the keyboard and mouse, with no luck. Anyone have any suggestions or had the same issue?  

Read other 1 answers
RELEVANCY SCORE 42

I have been working on my laptop this morning. After a one-hour break, when I came back to work, my wireless mouse and my wireless keyboard were no longer working on my laptop Pavilion 6g. I check the Parameters, and these two accessories appear to be undetected by the laptop. The operating system of  my laptop is Microsoft Windows 10 (64-bit).

Read other answers
RELEVANCY SCORE 42

I bought a new wireless internet keyboard and laser mouse yesterday but when i install the software in the computer only the wireless keyboard works but not the wireless laser mouse.....when I install software I leave the other mouse in to control everything...do you think it is because of that...but if I dont leave the other mouse in how am I going to control things to install software....Could Somebody Please help
 

Read other answers
RELEVANCY SCORE 40.4

I just ran my Microsoft Windows Update a couple of days ago which included Microsoft - Keyboard - Microsoft USB Dual Receiver Wireless Keyboard (Mouse and Keyboard Center). I think this is the culprit causing my problems. Now both my mousepad on my laptop and my mouse are active at the same time and I am unable to uninstall or turn off the mousepad. I've tried uninstall two different ways and neither worked after restarting and shutting down as per instructions. It is driving me crazy because it is extremely hard to type as the cursor will jump on the page and insert my typed letters into the wrong place. I have to get it uninstalled! Typing this is a nightmare and I am not dragging my thumbs on the pad or touching it in anyway. Any suggestions?
 

A:Microsoft - Keyboard - Microsoft USB Dual Receiver Wireless Keyboard & Mouse Update

Read other 14 answers
RELEVANCY SCORE 39.6

I had been having issues with Dell desktop computer and had asked for advice on this Forum in the past..I ended up taking the Tower back where I had bought..The Ram was cleaned and a tune up was done if you will..Now with the unit home I've hooked the wireless mouse and it responds as it should...My problem now is with the Wireless Keyboard, I've put in fresh batteries and tried a different USB wireless port...To no avail W/Keyboard does not respond...Any ideas what could be wrong or what I could safely do to correct this issue ?? Unfortunately the only Keyboard I have is Wireless... Thanks

A:Wireless Keyboard & Wireless Mouse......

well assuming that your keyboard has been working fine before i would ask if it is the kind that installs drivers from usb or from disk. Surprisingly i have had both.

Please go to device manager. (Get there by right clicking on computer then clicking manage and than clicking device manager tab in left window.) On right window it will say Keyboards. Please expand that and tell me what it says.

Thanks

Edit: Could you tell me what kind of keyboard you have? Model?

Read other 2 answers
RELEVANCY SCORE 39.2

I am currently studying C# and received a practice assignment for this:

Write a program for a teacher.The program should have an array that can hold the
test scores for 30 students.The program can randomly assign grades from 1 to 100 .
Determine the average score for the class.

This is what I came up with:

using System;
class Aprog{
public static void Main(){
int[] grade= new int[31];
int ctr;
System.Random rnd=new System.Random();
for(ctr=0;ctr<31;ctr++){
grade[ctr]=rnd.Next(0,101);
Console.WriteLine("Student{0}, Grade:{1}",ctr,grade[ctr]);
if(grade[ctr]>0 && grade[ctr]<50){
Console.WriteLine("F");
}
else if(grade[ctr]>50 && grade[ctr]<60){
Console.WriteLine("D");
}
else if(grade[ctr]>60 && grade[ctr]<70){
Console.WriteLine("C");
}
else if(grade[ctr]>70 && grade[ctr]<80){
Console.WriteLine("B");
}
else{
Console.WriteLine("A");
}
}
}
}

It works but some how it does not feel right or kind off sloppy. Does anyone know of a better way to create this application?
 

A:C# Assignment

Hi gfxrelay,

Never refrain from using methods to make the coding more readable :

Code:
[SIZE=2]using System;
class Aprog{
public static void Main(){
int[] grade= new int[31];
int ctr;
System.Random rnd=new System.Random();
for(ctr=0;ctr<31;ctr++){
grade[ctr]=rnd.Next(0,101);
Console.WriteLine("Student{0}, Grade:{1}",ctr,grade[ctr]);
Console.WriteLine(getLevel(grade[ctr]));
}
}

private static string getLevel(int grade) {
if (grade >= 80) return "A";
if (grade >= 70) return "B";
if (grade >= 60) return "C";
if (grade >= 50) return "D";
return "F";
}
}[/SIZE]

 

Read other 1 answers
RELEVANCY SCORE 39.2

Anybody have any suggestions on where to start? thanks

You are part of a software development team. I am your project leader. Our assignment is to develop a virtual calculator for the University. We have decided to develop the calculator using C++. I have given you the task to develop another math library called (arrays.h). In this library you are to develop the following functions:

add, subtract, multiply
These functions will take an array of numbers, the array size and two integer numbers as their parameters. The two integer numbers represent locations in the array. It will add, substract, or multiply the numbers at the two specified locations in the array return the result.
It should be able to handle arrays that are doubles, ints, and longs.
Return values should be of the same type as the array.
divide
This functions will take an array of numbers, the array size and two integer numbers as its parameters. The two integer numbers represent locations in the array. It will divide the first number located at the position designated by the first integer by the second number located at the position designated by the second integer parameter. It will return the result.
It should be able to handle arrays that are doubles, ints, and longs.
If the value of the second number is zero, this function will display an error message to the screen and return -999 .
Return values should be of the same type as the array.
negate
This function will take an array as its first para... Read more

A:next assignment :-)

Read other 6 answers
RELEVANCY SCORE 39.2

Hi guys! I am trying to find out how to assign hot keys to a specific action. Currently, I am having to copy and paste the BB code for font and color to every post I make on forums. [color=red][font=arial]this is what I type[/color][/font]

I would like to assign one of my hot keys to copy and paste this code so I don't have to do it manually every time. Anyone know how to do this? thanks in advance!
 

A:Hot key assignment

You can use the buttons that are along the top in the editing mode to make those codes automatically. Or you can use something like the free version of PhraseExpress to type any phrases you like with key combos.
 

Read other 1 answers
RELEVANCY SCORE 39.2

i am a student, i have to give a presntation in 3 days titled
"modren transport protocols and their applicibilty"

i have been searching for it and found a few things on wikipedia, which are not good enough, so can any one help me please
thanks
 

A:assignment help plz

You are not going to find what you need here. Do the research. The fact that you can't even spell it means you have a lot to do.
 

Read other 2 answers
RELEVANCY SCORE 39.2

I have W7 RC1 64 bit installed successfully on my new build. Its SLI and RAID. How come IRQ 16 has over a dozen assignments? From the graphics cards to the SATA/RAID controllers. Why is this IRQ so heavially loaded by windows?
TY

A:IRQ Assignment

  
Quote: Originally Posted by spyknee


I have W7 RC1 64 bit installed successfully on my new build. Its SLI and RAID. How come IRQ 16 has over a dozen assignments? From the graphics cards to the SATA/RAID controllers. Why is this IRQ so heavially loaded by windows?
TY



Could you tell us all about ypou coputer networking, raid contoller, etc

Ken

Read other 2 answers
RELEVANCY SCORE 39.2

well the assignment is to develop an abstract type for handling characters. Only handling 26 capital letters. I have this need help with CharSet.cc

//CharSet.h

class CharSet
{
private:
bool Contents [26];

public:
CharSet(); //constructor initializes set to be empty

void Add(char Value); //add character to set corresponding bool set to
true
void Remove(char Value); //Removes char corresponding set to true

void Union(CharSet ASet); //Union the set passed a parameter into set

void Intersect(CharSet ASet); //Intersects set passed a parameter
contains results of intersection
bool Member(char Value) const;
}//end class CharSet

Also have testSet.h which is my test

#include "Charset.h"
#include <iostream>
using namespace std;
void printSet(CharSet ASet)
{
for (char c = 'A' ; c <= 'Z' ; c++)
{
if (ASet.Member (c))
{
cout << c;
}; //end if
}; //end for
cout << endl;
}; //end printSet
int main()
{
CharSet Set1;
CharSet Set2;
CharSet Set3;

Set1.Add('A');
Set1.Add('B');
Set1.Add('C');
Set2.Add('B');
Set2.Add('C');
Set2.Add('D');
Set3.Add('A');
Set3.Add('B');
Set3.Add('C');

Set1.Intersect(Set2);
Set3.Union(Set2);
Set2.Remove('C');
cout << "Expect BC" << endl;
printSet(Set1);
cout << "Expect ABCD" << endl;
printSet(Set3);
cout << "Expect BD" << endl;
printSet(Set2);... Read more

Read other answers
RELEVANCY SCORE 38.4

I'd like for you give me an adobe photoshop assignment. Can you make it as simple as possible? I just want to learn how to use it.

Spent $620 at the USM bookstore and I don't know how to use it and I can't find a buyer. Might as well try to make it work.
 

A:gimme an assignment

Well....just a thought, but, you're nearing your 100th post, so why don't you try working on a custom avatar for yourself when you get to "senior member" status?

Like I said....just a thought! You may also want to hit random with this...those guys are great for coming up with "assignments"!

TT
 

Read other 2 answers
RELEVANCY SCORE 38.4

I click on a google bookmark and it sends me to the Yahoo home page and not the bookmarked page. Don't understand why, it just started doing it. Can anyone help me out so my bookmarks work??? Thanks in advance.
 

A:Bookmark assignment

Sounds like you may have downloaded something that messed with your search preferences. Try making Google your default search engine.

You might also remove the Yahoo toolbar if it is installed. Disable the Yahoo add-in in your browser
 

Read other 3 answers
RELEVANCY SCORE 38.4

Hello. Does anyone know how to force Windows XP to assign a USB device to a different/specific COM port? Thanks.
 

Read other answers
RELEVANCY SCORE 38.4

I'm having a problem with an assignment. I'm new to c++, so this shouldn't be too hard. Here's the instructions:

Revise the preceding assignment to distinguish resident and nonresident students. Input a residency status code followed by the number of hours enrolled. The status code is "R" for a resident, "Q" for the end-of-data-signal, and any other character for a non-resident. When a "Q" is entered, do not require the user to enter the number of hours enrolled. The letters may be either upper or lower case. The tuition rate is $52.00 per hour for residents and $110.00 per hour for nonresidents. Revise the final statistics to output (1) the average tuition paid, (2) the highest tuition paid, (3) the lowest tuition paid, and (4) the percentage of students who are residents. Use the format shown below.

My Problem: after typing in q, I still have to type in a number for "Hours" before hitting enter. Can anyone help me?

My code:
#include <iostream>
#include <iomanip>
#include <limits>
using namespace std;

//===========================================

int main()
{
const double RTUITION_RATE = 52, NTUITION_RATE = 110;
double Hours,Tuition, SCount,Highest,Lowest,AverageTuition,
PercentResidents,AllTuition,RCount;
char RCode;

SCount = 0;
RCount = 0;
AllTuition = 0;
Highest = 0;
Lowest = INT_MAX;
//===================================================================================

do
{

cout <&... Read more

A:C++ assignment problem

Read other 14 answers
RELEVANCY SCORE 38.4

Is it possible for me to use my OEM copy of windows on my second hdd for a day to install my copy of windows for a class assignment?? I dont want to have to uninstall my copy of windows on this system I built for class to reinstall it in front of the instructor, I spent hours tweaking it. So i was wondering if I could just take my win 7 disk and my second hdd to class, install windows on that for the class and then uninstall it when I get done with the class?? Please help, it would be greatly appreciated.

A:using second hdd for class assignment....

I'm not sure if your plan would work. You have an OEM disk and they activate a bit differently than a retail disk. Maybe activation can be ignored temporarily as with a retail disk.

But you can certainly download an ISO of Win 7 from mydigitallife.info, burn it to a disc, install from it, and run it for 30 days without activation.

Read other 4 answers
RELEVANCY SCORE 38.4

Replaced Geforce2 MX (32MB) with Geforce2 Ultra (64MB DDR). Card is made by VisonTek. Manual advises IRQ 11 as preferable. BIOS set to automatically select. Card was assigned IRQ 10, not shared. IRQ 11 is Ethernet card. Question: Is assignment of IRQ 11 to video card important enough to reconfigure BIOS manually? Does it make a difference in performance, or is it fine as long as it is not sharing the IRQ? Also, in Control Panel, under System>Performance, System Resources is only around 75-80 percent. After restart, will go up to only about 86 percent. I would have thought that a new video card, with more (and more efficient) onboard memory would have used less resources, not more. Any ideas?
 

A:GeForce IRQ Assignment

Read other 7 answers
RELEVANCY SCORE 38.4

I 've got a problem with macro assignments in vb6.
I 'd like to write the varible name to text1.box and assign the value of the same variable to text2.text , next to it on the form.
This way, I could debug the change of variables at the run time. But how ? Any help is appreciated.

 

Read other answers
RELEVANCY SCORE 38.4

I really have to finish my computer assignment and I am confused at few questions.

1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.

2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits.

3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all).

The last questions I believe uses the concept of

1) Fetch
2) Decode
3) Execute
4) Store.

A:Assignment help on Binary

Asking us todo your homework eh? Review your textbooks on the subject matter.

Read other 1 answers
RELEVANCY SCORE 38.4

Hi All,
I am new in this forest and wish well to all. Im looking for a person who can guide me through to make DVI or VGA to Mac Adapter DB15/HDDB15 converter. Attached is the snap of Mac Adapter. I would be grateful for your kind help.
Thanks,
 

A:Need pin assignment for Mac Adapter

Looking for this?
http://www.si87.com/www_store/merch...re_Code=1&Product_Code=7031&Category_Code=ADP

or are you actually after the pin out
http://margo.student.utwente.nl/el/componen/fpinout1.html#PINOUTS_009
 

Read other 1 answers
RELEVANCY SCORE 38.4

Given an IP address range, select the correct subnet mask for the scenario. IP address: 200.4.82.0/24 You need to create 6 networks with a minimum of 28 hosts per network. What is the correct subnet mask and the 3rd subnet range?

This is the answer I came up with. I just need to know if I'm on the right track...

225.225.225.0 - 255.255.255.224
200.4.82.64 - 200.4.82.95

Thank you in advance,
Denise
 

A:Help with subnetting assignment.

Welcome

You are correct with the subnet mask. The netmask of 255.255.255.224 will give you 30 hosts minus 2 for network and broadcasting address. So your networks would be 200.4.82.0, 200.4.82.32, and 200.4.82.64.

How did you come up with the subnet mask?
 

Read other 3 answers
RELEVANCY SCORE 38.4

New clients on my network always try to assign themselves a new IP instead of using 192.168.0.1 as their internet gateway. There is one client that functions correctly on the network and DHCP is enabled on it. I've tried manually setting the other clients as well as using DHCP and no dice. My home network was find once upon a time and poof, just stopped working one day. Thanks in advance for any help provided.
 

A:ICS IP assignment issues

Read other 11 answers
RELEVANCY SCORE 38.4

my whole class is so stuck with this, can someone please do it, its quit basic for most of the programmers on here

***Note

*We use Kawa 5.0 to run our programs
*please use methods and call each method as its needed
* Please use JOptionPane for message boxes

Heres the assignment

http://usera.imagecave.com/killswitch/jjjjjjjj.gif

i would be so greatful ... thanks in advance
 

A:Java Assignment ... Please Help

Read other 6 answers
RELEVANCY SCORE 38.4

I 've got a problem with macro assignments in vb6.
I 'd like to write the varible name to text1.box and assign the value of the same variable to text2.text , next to it on the form.
This way, I could debug the change of variables at the run time. But how ? Any help is appreciated.
 

Read other answers
RELEVANCY SCORE 38.4

I am trying to reassign an irq for a sony ieee1394 card. I added some com ports in 4 and 5, and it is in 10 I think. It has to have an isolated irq. How do I move it over?

qg
 

A:ieee1394 irq assignment

Read other 11 answers
RELEVANCY SCORE 38.4

I am a student studying MCITP in school, i really needed your help and my tutor/teacher gave this assignment:

3 Servers, 6 Switches and 200 Client Computers.

Question: "Plan how to set this up"
Thank you in advance
 

A:Urgent assignment

That description is a little vague.

We don't assist with doing peoples homework for them either.
 

Read other 2 answers
RELEVANCY SCORE 38.4

hey everyone!

I need help working out a few more bugs in this code for my most recent assignment. this program's purpose is to input an integer and return it reversed.

the code i got so far is:

import java.util.Scanner; // Imports the java utility so we can use the Scanner class to receive input.
public class ReverseStringProject
{
/**
* Get string, run reverse method, output reversed string
* @param args
*/
public static void main(String[] args)
{
Scanner in = new Scanner(System.in); // Declares the new Scanner which looks for input (System.in)
String theString = new String(); // Creates a blank String, which the user's input will go into.

System.out.println("Enter a string: "); // Prompts user for input
theString = in.nextLine(); // Sets the user's input (in.nextLine()) to the string theString.

theString = reverseString(theString); // Function to be made that will reverse the string given.
System.out.println("The reversed string is: "+theString);

}

/**
* Will take any given string, and return the reversed of the string.
* @param theString The string variable sent to it to reverse
* @return the reversed string
*/
public static String reverseString(String theString)
{
//CODE START
String charString = new String();
int stringLength = 0; //variable to store length of the string
int stringLength1 = theString.length();

for(int i = stringLength-1; i >= 0; i--)
{
charString += theString.charAt(i);
}
//CODE END
return charString;
}
}
... Read more

A:more n00b assignment help

Read other 9 answers
RELEVANCY SCORE 38.4

I have not been able to find which port is assigned to which device in window7.in the device manager there is no reference to show to which port a device is assigned.could any one help me to be able to find a port assigned to a particular device.Thanks.

A:port assignment

Hi arif1, hope this helps. How to get a list of all open ports on Windows 7, Vista and XP? ? FAQforge

Read other 3 answers
RELEVANCY SCORE 38.4

Any one assist me with this please:
ATZ Publishing Company occupies three buildings - buildings A, B, and C. Building A has one room containing 16 computers and one printer. Building B has two rooms one containing 8 computers, the other containing 9 computers and one printer. Building C has three rooms two rooms containing 10 computers and one printer each and the other room contains 4 computers. The distances between the buildings are shown in the diagram (please see diagram). The owner of the company is keen to improve the efficiency of the business and is considering installing a client/server Local Area Network (LAN) based on Windows NT 4. All users need access to two centralised file and printer servers. The LAN infrastructure should be based on Ethernet technology and all design consideration should include 50% growth. The management is concerned about security and would like a networking solution that is fast, scaleable, reliable, and offers easy troubleshooting.
 

A:Networking Assignment

What have you come up with so far? Your ideas? Thoughts? Do you not understand how something would work? etc?

We decided here awhile ago that we don't just do other people's homework without you first giving it a go and you didn't give any indication that you've tried. You don't learn anything that way and it's cheating. Give us what you've come up with so far and we can answer any questions/probs you have along the way.
 

Read other 1 answers
RELEVANCY SCORE 38

Hi All,

It's my first post here so go easy on me!

I've a fair knowledge of all things windows, but this one has me stumped.

If i hold "space" and tap "AltGr", then "MySQL Query Browser" launches. It's as if i assigned a shortcut to it.

However - i didn't ever assign this shortcut, and to the best of my knowledge, you can't have the space bar as the first part (hold down) of a shortcut anyway.

More Info:
Space + AltGr = MySQL Query Browser
AltGr + Space = Nothing

Ctrl + Alt + Space = Nothing
Ctrl + Space + Alt = MySQL Query Browser

Alt + Ctrl + Space = Nothing
Alt + Space + Ctrl = MySQL Query Browser

Space + Ctrl + Alt = MySQL Query Browser
Space + Alt + Ctrl = MySQL Query Browser

​Any ideas how i can unassign this? It's not a hindrance as the Mysql windows are easily closed, but it is annoying that i can't figure out why it's happening or how to stop it.

OS is 7x64.

Thanks for reading,
Jon
 

Read other answers
RELEVANCY SCORE 38

Anyone have an idea of this problem?

install OS on laptop and change the cd-rw/dvd-rom to z:
create image with ghost 8


original laptop is fine, but once you blow the image down to other laptops, on first reboot XP detects new hardware and requires reboot, the cd-rw/dvd-rom is back on D:. This happens everytime no matter what I do. On my desktops that I am creating the image on it works fine. But these laptops. Here are the specs.

Laptops are HP compaq nx9110 laptops with toshiba cd-rw/dvd-rom drives.

desktops are HP dc5000sff
 

A:cd-rom assignment changes back to d: after ghosting

So, when you assign the CD-ROM as z:, then install a ghost image, it shows up as D:?

Why is this a problem?
 

Read other 8 answers
RELEVANCY SCORE 38

I use an external USB HD which contains my Backing Tracks recorded through Cubase.

I transfer as MP3 files to Karaoke Creator software and add the lyrics. the resultant ,BIN file I use as an on stage lyrics monitor because I have a terrible memory.

I have a problem with my on stage portable and need to use the external drive on another computer.

The drive has an operating system assigned drive letter G. and all the files are locked to this Path

The computer I want to use does not have drive letter G available because it was once assigned to a second CD/DVD drive.

How can I unlock this assignment. do I have to refit the CD/DVD drive and re-assign it to another letter
 

A:Drive letter Assignment

Read other 6 answers
RELEVANCY SCORE 38

OS - XP Pro
Hardware - Wireless Intellimouse Explorer
S/W - Intellipoint 5.5

Mouse operates properly but i want to change the Wheel button to Double-click
When opening the intellipoint console I get the message "some mouse settings might not work until you connect a Microsoft mouse to a USB port..." Clicking OK opens the console and I change the Wheel button to double click but it does not work.

I have uninstalled and reinstalled with no luck. I am using the most recent version of S/W.

Ideas?
Thanks
 

Read other answers
RELEVANCY SCORE 38

In the Microsft Network Devices of XP each workgroup found on the LAN is assigned a icon. These are used to connect to the workgoup. Somehow the browser that is being assigned to access the workgroup has been designatated as a drawing application on my system call Printshop Pro.

It should be Explorer a file manager, or at least I believe so.

How do I go about changing this browser assignment. Right clicking on the icon offers no way to change it or am I mistaken?

thank you
 

A:Brower assignment is wrong

Hiya and welcome

I've moved this to Windows XP forum for more response

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 38

Troubleshooting a corrupted drive, so installed it on a working PC as a slave. Got it working long enough to pull the data. Drive letter assigned was "M". Shutdown, removed drive, boot. Drive letter was STILL showing up.
-Tried Disk Management in WXP, no luck.
-Tried command line removal, no luck.
-Used TweakUI to remove the drive from the list, which is great, but I still cannot assign "M" to any other device. I can live with it, but I'm curious if anyone has a solution.
 

A:Drive Letter Assignment

[tsg=welcome][/tsg]

Hi There!

The only guarentee of resolving you delemma would be to format and Reinstall Windows. That can be alot of work, but if you're having system issues and such, wiping the drive and reinstalling windows should resolve most id not all of the problems.
Good Luck!

ST
 

Read other 1 answers
RELEVANCY SCORE 38

Hello all. I am a (nearly) straight 'A' university student, who despite having followed my curriculum exactly as intended and meeting all prerequisites, have found myself forced into a class with fairly moderate C++, without the school having yet given me any proper C++ training.. (I only know the basics currently, from my own experience.)

I currently have a very frustrating assignment, for which there is virtually no help for in any of my course materials, and the instructor does not even seem to know what he is talking about and gives me annoyingly vague, confusing answers whenever I email him questions (and now he doesn't even respond at all !)..

Please, I could really use some help as I am stuck and need to have this assignment done by Sunday, 11:59 MST, though I may be able to get it extended if necessary (but am not sure that would be allowed)..
I have ATTACHED the ASSIGNMENT INSTRUCTIONS (" Data Structures and Artificial Intelligience with Lab FALA07 - Sec B.pdf "), as well as the current state of MY CODE (" main.cpp ") in the .zip file. If for some reason the attachment doesn't work, I have also uploaded it to the following URL:

http://www.megaupload.com/?d=GG5YBANP

This is a Win32 console project done in Microsoft Visual Studio, as I am sure you would see from my assignment instructions.
Basically, I am stuck on the the Union and Intersection portions, as my course materials have no reference for how to do this whatsoe... Read more

A:NEED HELP FAST for unfair C++ assignment

Your problem is not stricking to your specs:

// insert a new value only if it is unique (not already in the set)
void Insert(int newValue) {

Your Insert function does not check whether the new value is unique. If it did, your Union function would probably work. Furthermore, you simply rewrote InsertFront! You might as well just call InsertFront from within Insert.

In fact, I think that's what they expect you to do - FIRST call search to check if the value is already there or not, and if not, use InsertFront to add it.

Personally, I would store the list in numerical order as this is significantly faster; however the above method will work without errors, and as I said, is probably what they expect you to do.

Intersection is a simple matter of adding everything in the first set that's a member of the second set.

Good luck!
 

Read other 3 answers