Over 1 million tech questions and answers.

windiws inst

Q: windiws inst

I want to install windows 10 using usb external hard drive.and drve has two partition. how did i boot usb external hard dirve in other internal hard dtive

RELEVANCY SCORE 200
Preferred Solution: windiws inst

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: windiws inst

To be clear, you want to install Windows 10 on an external drive?

Read other 3 answers
RELEVANCY SCORE 48.4
RELEVANCY SCORE 48.4

??????? Windiws 8.1 ??? ?????? ???? ?? Windows? Windows ??? ?????????? ? ???????????, ?? ????? ? ???? ??????, ?? ?? ???????? ?? ? ??????????. ?????? ????????? ?? ????????????? ???????.

Read other answers
RELEVANCY SCORE 48

ok. so after having problems before with having to back up nearly 700GB of storage, on a computer thats in my bedroom and sounds some what like a low flying helicopter, when i had a system crash, i did a back up almost twics a day, so that they would only be backing up little chunks at a time. this all wored well and good until recently

i got a virus on my computer so had to do a system restore to earlier that day (virus is gone, gotta love malbytes anti malware) but when i came to doing my end of day backup it was slow. very very slow, so i had a look in my backup drive, and it turns out it is creating a whole new backup! its crazy!
having to back up 530GB of stuff will take far too long, and i dont trust using a system image (enless someone can convince me otherwise)

so is there any way to re-activate the backup so it overwrites my old backup, not create a new one, or maybey a backup prgramme thats alot faster?
 

A:windiws 7 backup

The Imaging backup/recovery speed is not a function of the Imaging program ..
It’s that the System contains a huge amount of personal Data.
I don’t trust W7’s Imaging either .. So I use Acronis True Image.

Here’s a W7 Imaging tutorial if it helps any.

You could use Acronis to make a new Full Image backup, but it will take a long time and will it will contain any leftover problems from your malware attack.
You can tell Acronis to make a new Full Backup or just an Incremental Image Backup.
You also should make a W7 Repair CD .. You might need it

You need to get your huge amount of personal Data out of the C System partition.
Your current method has several problems.

Imaging is great for backing up an operating system .. But NOT if it contains lots Data.
If you have lots of Data in the system .. It will take a long time to make a full backup or perform a recovery.
There is No faster Imaging program if the system contains a huge amount of personal data.
Incrementally Imaging the system will also backup any problems the system may have acquired.

I have partitioned my HDDs so the System and any Data are in separate partitions.
My Data is manually backed up as I create or collect new Data … via Drag n Drop.
My System stays small and is Imaged only after I perform a Fresh Install or recovery from a Fresh install Image (after it’s updated).

My backup HDDs also contain a bootable copy of a fresh System restore for the ne... Read more

Read other 2 answers
RELEVANCY SCORE 48

good morning all been trying to remove this svchost in windows that my spybot found. turns out its a trojan and it keeps redirecting my google searches not sure how we got it but its really slowing my computer down and getting aggravating here r the dds results:

.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421
Run by ownere at 9:45:13 on 2012-08-01
.
============== Running Processes ===============
.
.
============== Pseudo HJT Report ===============
.
uStart Page = hxxp://www.google.com/
BHO: {02478D38-C3F9-4efb-9B51-7695ECA05670} - No File
BHO: Adobe PDF Link Helper: {18df081c-e8ad-4283-a596-fa578c2ebdc3} - C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
BHO: Spybot-S&D IE Protection: {53707962-6f74-2d53-2644-206d7942484f} - C:\PROGRA~2\SPYBOT~1\SDHelper.dll
BHO: {5C255C8A-E604-49b4-9D64-90988571CECB} - No File
BHO: Java™ Plug-In SSV Helper: {761497bb-d6f0-462c-b6eb-d4daf1d92d43} - C:\Program Files (x86)\Java\jre6\bin\ssv.dll
BHO: Windows Live ID Sign-in Helper: {9030d464-4c02-4abf-8ecc-5164760863c6} - C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll
BHO: Java™ Plug-In 2 SSV Helper: {dbc80044-a445-435b-bc74-9c25c1c588a9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll
TB: {D4027C7F-154A-4066-A1AD-4243D8127440} - No File
mRun: [Malwarebytes' An... Read more

A:svchost.exe in windiws

Greetings and Welcome to The Forums!!My name is Gringo and I'll be glad to help you with your computer problems.I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the ... Read more

Read other 3 answers
RELEVANCY SCORE 47.2

hi,
My windows XP home edition has been acting strange , sometimes the computer freezes for no reason and has to reboot, then sometimes i have a couple of applications open, then they flash orange and i click on them aand it doesn't open, sometimes it opens behind whatever i am viewing and in some cases i have to click on a application or (window) a couple of times too much to open or even right click on it. This is really pissing me off :|, i have overclocked my RAM and CPU a little, temperatures are good according to various programms. But this has occured well after i overclocked. plz can sumone help, i dont want to go throguh the bother of reinstalling windows unless i have to, but that means i have to back up all ofmy stuff and reinstall drivers etc.

plz help its doing my head in.

thnxx in advance.
 

Read other answers
RELEVANCY SCORE 46.8

Hi,

I hope someone can help. I have 6 machines networked and all are running Windows 2000 pro. One of the machines has my HP832c connected to it by a USB port. I have shared the printer in that machine to everyone. I also checked all the permissions so all users can operate the printer and settings. This is my home network. The other computers can see the printer and can use it if they log in. The printer shows up in the other computers as the default but if you reboot any of the other computers you have to relog in to use it? Is there a way to have this network printer automatically connect when the other computers log in??? The Computer that has the printer connected to it is always on.
 

A:Network Printer on Windiws 200o pro

Do you mean you get a password prompt for access to the printer when you start the machine or try to use the printer? If so, you need to create accounts on the machine with the printer attached that are the same as the accounts on each machine you log on to the network with. Say one machine has the logon of James with a password of Winters, you have to create an account named James with a password of Winters on the machine with the printer connected to it. Then windows will verify behind the scenes the logon for the printer access each time a machine reconnects to the network.
 

Read other 1 answers
RELEVANCY SCORE 46.8

Hi I am looking at a PC which has an expired version of Norton Antivirus on it. The problem is that when you try to open web browser window it immediately goes minimised and you can't maximise it. IE and Firefox are both affected. You can run them fine if you boot in safe mode. It has been suggested to me by a friend that the Norton could be at fault or that it might be a Virus. Has anyone come across this before or have any suggestions as to what is causing this?

AMD 1700
Windows XP SP2
512Mb

Thanks, Mark

Read other answers
RELEVANCY SCORE 46.8
RELEVANCY SCORE 45.6

alright, i purchased an iRig yesterday and tried it out on the AmpliTube app on my 2g iPod touch, it works just fine. Then i attempted to plug it into the mic input on my brand new Toshiba Satellite to record using the lastest version of Audacity and it wouldnt recognize the iRig from what i can tell. so my question to you guys is this: Does the iRig only work with Apple products? or is there som etroubleshooting i can try to get my laptop to recognize it? thanks for all your help in advance
 

Read other answers
RELEVANCY SCORE 45.6

Hi, I was wondering if anyone can help me diagnose to see what is causing this.
Thanks.

A:Asus T100 tablet random BSOD Windiws 8.1 32-bit

If you use Windows 8, (or) 8.1, post this thread on EightForums.
www.eightforums.com

Read other 1 answers
RELEVANCY SCORE 40.8

Hi Guys, long time no hear....
So Here's my problem, I can be browsing the web and things start to slow down then something just starts scanning from nowhere. Iv'e ran Kaspersky and got nothing, Iv'e scanned with my Malwarebytes and got nothing. No matter how many times I click 'cancel' it still continues to scan. My guess is this it's bad and needs to be removed, only problem is that I can't seem to figure out how? Please Help...at this point I'm starting to feel like an idiot

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:28:24 AM, on 3/1/2010
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16981)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\dllhost.exe
C:\Program Files\internet explorer\iexplore.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft... Read more

A:inst.exe???

bump...
 

Read other 1 answers
RELEVANCY SCORE 40.4

hey everyone, I recently installed 3ds max. When I try to run it, a window pops up and says "This application has failed to start because d3dx9_26.dll was not found. Re-installing this application may fix this problem". I recently reformatted my computer, and vaguely remember this problem when I installed it for the first time. I installed directx 9 and everything was fine. I tried to install directx 9, but after starting the install, it stops and says the file failed to download. Anyone know whats wrong or how to fix it?

Read other answers
RELEVANCY SCORE 40.4

Searched and deleted all AOL stuff,
but every time I start up, the AIM
window opens.

Don't want it, just takes extra time
to open when I start up.

Haven't been able to find it so I
can delete it!

Appreciate any tips!
 

A:How Do I Get Rid of AOL Inst Messenger!?

Have you looked in msconfig,or startup folder ? Have you searched the registry for anything beginning AOL OR AIM ? It took me nearly a year to get rid of AOL junk.
 

Read other 5 answers
RELEVANCY SCORE 40.4

I installed DVDfab 6 plat......and this inst.exe started going crazy and was trying to change registry and security things on my pc.As it installed or tried to, comodo prompted me to allow or block it.....well dumbie here let a few allows go before i looked up inst.exe and found out it was a virus.... after looking through websites I searched my pc for inst.exe and found 1 in the prefetch folder.....and deleted it.scanned my computer with comodo and with spybot s&d and they both came up clean.....but I have been noticing some wierd schost activity when i am on the internet....as in 15 or more outgoing connections with small 60 - 200B of info moving around...I dont know if my pc is infected, if comodo sucks, or if I am just a super noob at computers.....PLEASE HELPI downloaded Hijackthis and this is the outcome:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 1:00:17 PM, on 1/14/2010Platform: Windows 2003 SP2 (WinNT 5.02.3790)MSIE: Internet Explorer v6.00 SP2 (6.00.3790.1830)Boot mode: NormalRunning processes:C:\Program Files (x86)\Java\jre6\bin\jqs.exeC:\WINDOWS\SysWOW64\PnkBstrA.exeC:\WINDOWS\SysWOW64\PnkBstrB.exeC:\WINDOWS\RTHDCPL.EXEC:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files (x86)\DVDFab 6\DVDFab.exeC:\PROGRA~2\DVDFAB~1\fabCore.exeC:\Program Files (x86)\Opera\opera.exeC:\Documents and Settings&#... Read more

A:inst.exe problem

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.Please download OTL from following mirror:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt <-- Will be minimizedIn the upper right hand cor... Read more

Read other 2 answers
RELEVANCY SCORE 39.6

I recently tried to install an external modem blaster. One completed I restarted the computer and the updating hardware dialog appeared but it never finished and froze the computer. Ever since then when my computer is started, it freezes and the close program box reveals to programs ----cmdninst (Not Responding) & cmdninst. What to do

 

A:Cmdn Inst (Not Responding)

what operating system are you running.

Have you tried booting up in safe mode, uninstall the device in both add remove programs and device manager and rebooting.
 

Read other 3 answers
RELEVANCY SCORE 39.6

Finally got it to boot in safe mode, did this 2 weeks ago, had to completely restore... in safe mode now, what should I run to try and fix it. Thanks!!
 

Read other answers
RELEVANCY SCORE 39.6

I'm trying to install a Tooshiba satellite hdd in a non Toshiba desk computer to retrieve files, so I can reinstall Windows on the satellite hdd. Is there a Toshiba block on the drive that is keeping me from seeing the drive?
 

Read other answers
RELEVANCY SCORE 39.6

DV6810US. No OS on HDD and can not read from DVD or USB to install new disk. BIOS works ok and set boot order correctly. DVD spins up and can eject ok then but screen goes black with cursor blinking in upper left corner. Once this happens dvd or usb does not work. Have tried usb stick with win 7 os on it, dvd and external usb dvd drive but none working. Any help would be great as the computer is not overheating and stays on a long time. I would like to get this one and a DV 6910US with same issue working. I hate to see a computer go to waste. Thanks in advance.

Read other answers
RELEVANCY SCORE 39.6

Hello, this a bit of an odd problem, but I've used this forum in the past with success, and hopefully I can get some advice on this problem.

About 2-3 weeks ago I made a post on these forums about my other computer receiving an email virus, and had eventually run ComboFix and everything was okay. On that computer I realized that for some reason the option to show hidden files had recently changed, and that I hadn't made it. I initially believed Combofix made the change, so I attempted (stupidly) to run Combofix on the computer I'm on now to test my theory. (I found out later that plugging in my iPod somehow turns the view mode off.) Anyhow, I ran ComboFix fine, uninstalled, then I found out the iPod was the problem. Just for laughs I decided to check the ComboFix log and found this entry.

((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))
.

c:\documents and settings\Vincent\Application Data\inst.exe

A quick Google search told me that this was a pretty nasty trojan, and someone else on bleepingcomputer reported the same find being related with a major rootkit infection. With the computer I'm on now, I hardly download from the web and always run any .exe through VirusTotal and AVG before I run it. I have however recently plugged in a Flash Drive in this computer and my other computer, and am wondering if it may have caused the infection. I checked my secondary computer and found no such .exe file, but... Read more

Read other answers
RELEVANCY SCORE 39.6

How can I configure windows update not to remind me of updates
I deliberately have not installed?

In the former version there was a "don't remind me to install" option but not anymore

A:Don't want to inst. some updates but get notif.

Action Center>>Change Action Center Settings>>in "Security message" uncheck "Windows Update,in "Maintaince messages" uncheck "check for updates"
Action Center - Change Message Settings

Read other 6 answers
RELEVANCY SCORE 39.6

Symantec tells me I have a file (c:\winnt\system32\inst.exe) infected with a backdoor virus. I have deleted all the files that this virus creates, but when I look for the inst.exe file, I cannot find it anywhere.

Show All Files is on, and I am looking in the exact location that the virus detection software directs me. Any ideas!?

Thanks in advance for any suggestions.
 

A:[Resolved] can't find inst.exe

Read other 16 answers
RELEVANCY SCORE 39.6

Can't figure this out, maybe someone can? (PLEASE!!!) I reinstalled xp on my p4 system with two hard drives C(160gb) & D(80 gb). Burned all important info off the C and just left the D alone cause it wasnt gettin touched...right? Well now after booting up my fresh new os I cannot access my D drive any more, I can see the D drive in my computer but it doesnt show used or free space and when I try to access it it tells me that it is'nt formatted and if I would like to format it?(no way jose! All my mp3's are on that!) When I checked the properties of the D drive it shows no problem, working correctly, but it's coming up as raw file format? Whats up with this RAW? I know my data is sittin there I just cant see it, what am I to do??? :dead:
 

Read other answers
RELEVANCY SCORE 39.2

I have had no luck whatsoever troubleshooting my pc conflict with AOL Instant Messager. I recently dropped my AOL service and have downloaded the AIM program. Whenever I open AIM, my computer freezes and falls into safe mode. It seems as if there is some sort of conflict. I have received advice to remove as many AOL programs as possible from my computer, and I have done my best. I re-downloaded AIM, and same problem. I am at my wit's end. Any advice or suggestions would be most appreciated....
 

Read other answers
RELEVANCY SCORE 39.2

I'm building a new PC for my wife, I have a 2TB HDD and I want to setup a primary Partition of about 100Gig for the OS and the balance as a Big data drive.

I want all the data to automatically goto the "D" partition. I used to do this all the time, now I have employees that do it and I gave them all off till the 3rd of January and its been too long since I did this.

I own a Computer Co we have a multi-user OEM license from Microsoft as a reseller and I know we have a utility (or used to) to make a Pre-Install CD to setup a computer as the install automatically continued unattended.

I want everything to goto the D Partition of the HDD that needs to be setup my wife isn't really computer literate so I don't want to require her to have to change settings whenever she downloads files or installs programs.

I sure would appreciate some assistance from anyone. This is really embarrassing I'm one of the first 100 Microsoft OEM's and had Action Pack since they started. But I'm committed to not calling one of my employees during their time off.

Thanks in advance for your assistance, This is her Christmas Present, and I'm stuck.

A:Win7 Inst 2tb w/ sep data partit Need help

Hello there, Tom!

What you want to do is that the path to the folders Images, Music, Downloads, Documents and everything leads to the D: partition??

Click on Properties of each folder you want to move to the D: partition, look for "Location" tab and set the new path to it.

IE: D:\My Documents, D:\Music

And that's it..

Read other 2 answers
RELEVANCY SCORE 39.2

I upgraded to Windows 10, and now my graphics driver keeps crashing. Since it's Intel, I downloaded the new driver from their site but can't install it because it's "not validated for this machine." I downloaded the newest driver from Acer FOR MY MACHINE but still get the same error message. Other than rolling back to Windows 8, what can I do to fix this problem?

Read other answers
RELEVANCY SCORE 39.2

How can I find out the reason and get the update installed

Read other answers
RELEVANCY SCORE 39.2

I installed the new security update this morning(KB977165) and a few seconds after installing successfuly I might add, it popped up again and said it had a new update to be installed, same one. Did this 6 times. All of them were successful, but it must not be recognizing them. What to do. I ran the Windows update reset tool to no success. I do all of my updates manually and have yet to have a problem.

A:Update installing and recreating like it never got inst

Welcome!

Go to Windows Update>Update History. Is the update listed there, and was it installed successfully?

If so, you can hide the update. Right-click on it and tell it not to show.

Read other 6 answers
RELEVANCY SCORE 39.2

Dell Inspiron 3521. FOUR months past the warranty, the hard drive FAILS.  Apparently this is a common problem with this laptop.
 
Bought a new hard drive, BIOS recognizes hard drive, however upon booting up with Dell Windows 8 factory restore dvds, it says "unable to restore, required partition is missing".
 
I am unsure what to do at this point, other than burn the laptop at the stake after dousing it with holy water.
 
Thanks in advance for reading post, and providing assistance/guidance.
 

 

A:Dell Issue - Fresh Win Inst on new HDD

It's possible the Recovery Disks are looking for the Dell Recovery Partition before they can start a restore but I have not heard of that issue. You can go here to get the install media. Pick the same version as what you have. This would probably be Windows 8.1, 64bit Your key is embedded in firmware so you should not have to enter it. If you start the install of Windows 8.1 and it asks for a key, then we will have to use linux to retrieve the key that is embedded in firmware but first download the media and see if it installs without inputting a key.
 
Edit: Referencing this post from a BC Advisor
 
However many manufacturer's use their own custom configurations which might not include the necessary configuration files ( automated Diskpart script etc ) to perform the bare metal recovery
 

 
This may be your case where the Recovery disks would not work on a bare metal recovery, i.e. a new hard drive install.

Read other 22 answers
RELEVANCY SCORE 39.2

i have some problem with my operating system.after i try to opend someprogram or download some material on the net i see right on the center of the monitor inside a rectangular shape this note: c:\windows\system32\pcbios.exe c:\windows\system 32\auto exec.nt. the system file is not suitable for running ms-dos and microsoft windows applications.choose close to terminate the application. some expert advise are welcome. i always admire the brillant people.thanks for the attention.
 

A:problem maybe after win service pack inst.

i can't find anything relating to pcbios.exe. is it pcibios?

As to your c:\windows\system 32\auto exec.nt error try this
 

Read other 1 answers
RELEVANCY SCORE 39.2

I upgraded to Windows 10, and now my graphics driver keeps crashing. Since it's Intel, I downloaded the new driver from their site but can't install it because it's "not validated for this machine." I downloaded the newest driver from Acer FOR MY MACHINE but still get the same error message. Other than rolling back to Windows 8, what can I do to fix this problem?

A:Downloaded new graphics driver here but can't inst...

Have you tried running all Windows 10 updates? What model computer are you using?




Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

Read other 1 answers
RELEVANCY SCORE 39.2

Having trouble with my computer for a few days. Google search links redirect to advertising pages and McAfee software warns that "inst.exe is trying to access the internet." Also audio plays ads in the background with no page loaded. Computer has become dreadfully slow. I have reset the router a couple times fix redirect problem but it keeps coming back. Please help.

A:Google redirect virus, inst.exe

Windows xP Pro SP3

Read other 1 answers
RELEVANCY SCORE 39.2

.

.. hello helpful people ...
.. I am trying to install MS Access 97 on to my machine at work .. and it won't install because of an ODBC problem. There is a problem at the end of the installation .. -- The config. of the ODBC Microsoft Access Driver (*.mdb) driver failed.

.. I've tried to configure the ODBC settings myself and can't even create new ones .. it says,

-=-=-=-
-- The setup routines for Microsoft Access Driver (*.mdb) ODBC driver could not be loaded due to system error code 1157.
-=-=-=-

.. after clicking the above warning .. it says,

-=-=-=-
-- could not load the setup or translator library
-=-=-=-
.. I've tried so much already ... installing most recent MDAC files from Microsoft .. I've used several different copies of MS Access.

.. installed MDAC (v.2.6) ... and tried installing MS Access 97 again .. same error :

-- configuration of ODBC driver failed.

.--.--.--.--.--.--.--.

.. my settings for Microsoft Access Driver (*.mdb) seem to be correct (files that are stated are in correct location).

.. but I have another folder in ODBCINST.INI .. and it is the only one that has files in a different location.

-- Client Access ODBC Driver (32-bit):

DRIVER = "C:\sqllib\bin\db2cli.dll"
SETUP = "C:\sqllib\bin\db2odbc.dll"

* neither of these files exist on my machine .. neither do the folders for that matter ... thinking I should create such files and folders .. or change the path of.

(feelin... Read more

A:.. MS Access 97 .. ODBC inst. probs.

A search for that error message came up with a few answers on on Google, though (predictably) zero on MS. At least you can know that you are not alone.

You might go and make sure you have the "right" version of MDAC. (There are many to choose from, god bless 'em.)

Several of the other sites mention using 2.5SP1 to resolve the problem, for what it's worth. I'd just keep trying MDAC versions until something clicks.

Or wait for someone who's seen this baby before to come around.
 

Read other 1 answers
RELEVANCY SCORE 39.2

I have a few different indications of trojans malware that I have been trying to get rid of and not succeeded yet. Any able to help would be great. I have Malwarebytes anti-malware and hijackthis installed on my pc. any chance I can run these and post logs here for any help? or do you have other recommendations.
thanks for any help.
Tony V
 

A:need help getting rid of divxinstaller.exe and yahoo tool bar inst

Please do not create multiple threads for the same problem.
Continue here: http://forums.techguy.org/malware-removal-hijackthis-logs/813941-need-help-removing-trojans.html
 

Read other 1 answers
RELEVANCY SCORE 39.2

Since adding an additional HDD I have moved my burner and rom to the seconday IDE. Since then I get this message on start up. "Secondary IDE Channel no 80 conductor cable installed". Which after a search here would be ok if nothing was hooked up to the secondary IDE but my cd drives are and they seem to be working ok -a little slow. Any ideas. I also tried to add another ram stick but got alot of errors and removed it - if it means anything. Thnks for the help and this site is GREAT
 

A:No 80 conductor cable inst. Message

Never heard of that message before but what it is referring to is.

80 conductor cables are used for udma 4 and 5 drives. Ata66 and ata100 need the special cable to work. Cdrom's and burners do not. they can use a standard 40 wire cable.
 

Read other 1 answers
RELEVANCY SCORE 39.2

hi all.
i have a dell inspiron 3551 laptop.
i dont think the specs will matter on this thread but if required i can provide.
the laptop came with a 5400 rpm hard drive and i am shifting to a samsung 860evo.
i have made a backup image of the hard drive using [email protected] image and windows 10 is installed on the laptop.
so after i install the ssd and restore the image do i need to make any settings to windows 10?
also is any change in the dell bios required?
 

Read other answers
RELEVANCY SCORE 38.8

I have a C720P that the digitizer was not working on, so I cracked open the LCD and checked the connections, then reassembled everything and the backlight was not coming on. I grabbed a replacement LCD assembly and installed it and the backlight is not coming on in that one either. The image is (barely) visible, just no backlight.

Read other answers
RELEVANCY SCORE 38.8

I?am using Win7 X64 b7057 primary on C: (second partition D: for data).
I tried to intall Vista 64bit for dualboot, but after GUI of installing Vista finished and FIRST restarted an error black screen appeared after dual b.
selection, when I select Vista:

failed to start
\windows\system32\winload.exe
status: 0xc000000d

And nothing helped /tried to repair from Vista DVD/.
I installed Vista to a partition created on the same HDD as Win7 as a "logical"
(it shows Win7) with 33GB free space /I think it should be enough/.
So the intaller of Vista didn?t finished installing Vista. Any idea how to fix it?
I read some articles about EasyBCD,etc but I?am not shure if my problem can be fixed with there utils. Can I install WinVista to a "logical" partiotion? /win 7 is on "primary"/

A:Win7 + Vista X64 dualboot inst.error :(

According to Can Vista boot from a logical partition? several users have experienced no problems installing Vista and running it from a logical partition. I suspect the problem actually lies in the fact that Vista did not add itself to the BCD Store correctly, and that Easy BCD should help you fix it up....

Read other 9 answers
RELEVANCY SCORE 38.8

My hard drive will not boot any more.  So I bought a new one and I want to install Windows 7 on it.  I have my original Product Key but I do not have an install CD.  How do I install the OS on a blank hard drive?  How do I get the installation cd?  I am not paying for a product I already payed for either. Thanks for the help in advance.

Read other answers
RELEVANCY SCORE 38.8

My hard drive crashed on my Dell Studio 540 - Vista Home Premium. I had gotten some help on the Crash and Debugging forum, however it turned out to be a hardware issue. Dell installed a new hard drive the other day. Since that happened the video/graphics are all smaller on my 24" monitor. All of the text and icons in the tool bars, system tray, etc. are a lot smaller than they were with the old hard drive. I manage to enlarge the desktop icons. I also went to Display and changed the DPI from the standard 96 to the large 120. This made the text larger but still not as large as it used to be. I called Dell but they were not a lot of help.
I'm not great with computers but I know a little. I don't know if there is some type of setting I should change.
Thanks

A:Graphics Smaller after New Hard Drive Inst.

Welcome
This is probably not the solution, because Dell would have picked up on it, but did you try to change the resolution
Screen Resolution

Also right click on desktop>personalize>display

Read other 12 answers
RELEVANCY SCORE 38.8

Crashes related to storport.sys Windows 8 x64 Pro Reposting this here, made the mistake of posting this in Windows 7 crashes area, sorry.

Hey folks. Have banged my head on this and think I need some help with this. My system was previously completely stable under Windows 7 Ultimate x64. Now since my Windows 8 x64 pro install I am getting crashes about once every eight hours related to storport.sys ever time.

Please find my dumps/information attached.

Thank you so much in advance.

A:Crashes related to storport.sys new Windows 8 X64 pro inst

Something seems to be funny with win8 and the intel storage driver.
I don't know the details.
On
Station-Drivers: le site de drivers, bios, firmwares avec un forum d'aideThere is an intel storage driver with patch.
Asus recommends not to uninstall the intel storage driver.

For me this means: when you don't have it, don't install it.
When you need it, such as for raid, keep up with the latest intel drivers.
Be careful with uninstalling it.

Personally, my practice has been not to install it any more, as it has caused only hardship for me.

This version is available from station-drivers:

11.6.2.1002
drivers + patch
Dell mentions:
Problem: A blue screen occurs when you attempt to
uninstall the Intel Rapid Storage Technology driver in Windows 8.

Solution: The Intel Rapid Storage Technology is
considered a critical boot path driver and uninstalling it, is not supported. Be
sure to update your Intel Rapid Storage Technology driver from the Dell Drivers and Downloads website before upgrading to Windows 8.

Read other 2 answers
RELEVANCY SCORE 38.8
A:How to keep the activation of MSoffice win7-8.1 clean inst

Hi Kenshin, welcome

Have you seen this?

Link: Advanced Tokens Manager

Documentation listed on page






Backup Compatibility:

Windows 8.1 Family ***Windows 8 FamilyWindows 7 FamilyWindows Vista FamilyWindows Server 2008 / 2011 / 2012 FamilyMicrosoft Office Family from 2010 to 2013

Read other 9 answers
RELEVANCY SCORE 38.8

Our Pavilion DV8 is getting on now but does still work fairly well (good as a spare PC). I've worked around the well known internal Wifi problem by using a Netgear USB adaptor but I've never had success sorting out a replacement battery that actually worked so gave up. Rather worryingly I still have the original battery installed in the laptop which hasn't held a charge for many years and it is starting to concern me it may start leaking at some point. I would like to know if it is safe to completely remove the battery and only run the laptop on the AC power connection? The thing is, I'm sure I recall reading somewhere (way back when I bought it in 2008/2009) that the laptop should 'not' be used without the battery installed. I've recently found the manual again but can't find where I might have read that information. Needless to say I'd appreciate any advice from anyone who has completely removed their battery and is only using AC power without the laptop blowing up or something? Thanks

A:Pavilion DV8 1080ea - Safe to use on AC without battery inst...

Hi, I have UPS therefore I can say safe in my case but I don't know power supply situation in your country / area therefore I can't say safe or not. It is ok to use AC w/o battery if - and only if - no unplanned power outage in your area. Because loosing power supply suddenly could cause unpredictable damages for your computer specially HDD. Regards.

Read other 1 answers
RELEVANCY SCORE 38.8

I am considering buying a 256 SSD for my older G62-219CA. Can I somehow backup or clone JUST the recovery partition so when I install the new SSD I can put the recovering on there and have that convenience for later use? I can't close my entire hard drive b/c the SSD will be too small compared to the original drive.  Any ideas/suggestions would be greatly appreciated. ToddNS











Solved!
View Solution.

A:Possible to backup/clone Recovery Partition only before inst...

It is not really possible to backup or clone the recovery partition. Your best option is to create the HP Recovery Media using the Recovery Manager or to order the media from HP at DVD - Windows 7 64b Dual Language (Office 2010) + Supp 1 Recovery Kit. If you have any further questions, please don't hesitate to ask. Please click the White KUDOS "Thumbs Up" to show your appreciation

Read other 4 answers
RELEVANCY SCORE 38.8

After the anniversary update to W10 I lost the touchscreen functionality to my S1002.  I attempted to reinstall drivers contained in the Platform Driver download package and the update returns an error message, killing the process.  I disabled the windows driver certificate requirement, reloaded, and still got the same result.  Any solutions would be appreciated!

A:Aspire One 10 S1002 Platform Drivers will not inst...

Is the error "unsupported OS" ? If so you may need to use compatibility more.

Read other 1 answers
RELEVANCY SCORE 38.8

So, i bought this computer awhile ago, and i noticed now that my speakers aint working well. The sound reproduced by them sometimes (usually when I switch the computer on they are working well) is laggy, crashes and does strange noises. The volume also goes down significantly. The problem doesn't seem to happen with headphones plugged in. Any tip of what i should do to fix this problem? Thank you.

A:My laptop sound inst working properly.

Hi, Can you post back with the full Model No. and Product No. of your Omen - you can usually get this by holding down the fn key and pressing esc, otherwise see Here for a guide on locating this information. Regards, DP-K 

Read other 3 answers