Over 1 million tech questions and answers.

Flex 3-1120 Laptop Sound Problem

Q: Flex 3-1120 Laptop Sound Problem

Hello, My windows updated a few weeks ago and after the update I had a few issues with my touch pad and sound. I was able to roll back my touch pad driver and fix the problem but there has been no update to Realtek High Definition Audio Driver for several years so there was nothing to roll back to. The issue I have been having that my sound has been contstently going up leaving the sound bar on the screen (A picture is attach below if it helps). This has become very annoying since I have not found a way to get rid of this. So far I have tried updating and deleting then reinstalling the driver but the sound bar remains. Therefore, is there any way I can fix this? Any help will be much appreciated.Thanks,SoundMax

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Flex 3-1120 Laptop Sound Problem

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 74.8

Hi, I just purchased a Flex 3-1120 with Windows 10 preinstalled via Lenovo.com. When I try to use the Lenovo OKR to restore the system back to the orginal state, it takes to the Windows 10 recovery options. Is this correct? Will the Windows 10 receovery option restore everything including the Lenovo preinstalled programs/apps? Thanks for your assistance!

A:Flex 3-1120 Windows 10 OKR

Iam not sure if it will restore lenovo pre installed apps but it will restore windows 10 completely......  RegardsKamal



Ask any questions or Doubts,Always ready to help.... Dont forget to click kudos if i have helped you

Read other 1 answers
RELEVANCY SCORE 74

I have a Lenovo Flex 3 1120. When I bought it, I went for the hard drive option that had the cheapest price since all the other options were HDD of various sizes and I knew I was going to upgrade to SSD anyway. The flex 3 I have though, does not have a HDD and uses an eMMC embedded storage. When I went to install the SSD, there is an empty space for where the hard drive would sit and there is no SATA connection. There is a socket in the board that is labeled "SATA conn1" but no cable.
 
I called support and was told it is possible to use the SSD and boot from it. The cable and caddy can be purchased but she said Lenovo will not supply the part. I found the part number I think,  1109-01051, but apparently no one else sells it either. There was one on ebay, but it's gone. anyone know where I can find one?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

A:Flex 3 1120.- No SATA connection!

update: the item number is actually 5C10J08424. I still had a hard time a seller with it in stock. One website wanted about $70 for it not including shipping. I finally found/bought one on encompassparts.com for about $20 including shipping. I'll update once I get to try it out.

Read other 8 answers
RELEVANCY SCORE 73.2

Hi, I have a Lenovo Flex 3 1120 and am having trouble playing games on it so i was wondering if i would be able to ugrade my graphics card and what card would be compatible with it. The processor is: Intel Celeron CPU N2840 2.16GHz
RAM: 4.00GB
System type: 64-bit
Graphics: Intel HD
If you need more information let me know how and where to find it becuase i need help. Thanks! 
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

Read other answers
RELEVANCY SCORE 72.4

I recently updated to the Windwos 10 Fall Creators update (Build 1709, 16299.125), and as soon as I updated, the graphics driver failed and switched to the Microsoft Basic Display Adapter. I tried updating and rolling back the driver without success. My driver right now is at the latest version (10.18.10.4358). I already tried fixing this issue with Microsoft support but they couldn't find any solutions. Microsoft Support Link: https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/intel-hd-graphics-not-working-... 

Read other answers
RELEVANCY SCORE 64.8

As you can see there are multiple problems that have come up in this notebook. I recently reinstalled windows 10 to solve some other problems. The installation went perfect and afterward everything seemed to work fine. When my wife turned it on the blue BIOS screen came on (as it did before the installation) and I was unable to use the touchpad, mouse or arrow keys to move the selection. I rebooted and it started up fine only the keyboard did not work. I had to use the onscreen keyboard to log in. Once inside, sometimes the keyboard works and sometimes it doesn't. I've tried using the f6 to toggle the touchpad on but it didn't work. The keyboard is touch and go and now the blue screen BIOS sometimes comes up when the computer is started. Any suggestions would be appreciated. I've searched for solutions and haven't been able to find anything that works to solve these problems. I've uninstalled the drivers and rebooted for a fresh re-install of the drivers but that only temporarily fixes the problem. Thank you.

Read other answers
RELEVANCY SCORE 55.2

Hey i have a Dell Inspiron 1120 with win7 home premium and out of nowhere when i restarted it it said " a disk read error occurred" and to press ctr,alt,delete to restart the computer. since that didn't work i tried to re install windows 7 and my hard drive wont show up, and even when it does in the middle of the installation a error comes up that says something about the installation files missing i don't remember word for word but it was along the lines of that then when i restart again it says " BOOTMGR Missing" sorry if i left anything out just let me know what other info you need. Thanks

A:Dell Inspiron 1120 Boot Problem

Go into BIOS. Does the hard drive show up there?

Read other 7 answers
RELEVANCY SCORE 54

I let laptop find its serial and model through lenovo website. It came back and say its 4k ips screen. But windows 10 display settings max resolution is 1920x1080. Who lied? Seller or lenovo.  I am **bleep**ing angry.  Anyone know how to make my laptop show 4k video.  I installed 940mx nvidia driver as well. Flex 5-1570 (Type 80XB) Laptop (Lenovo)Serial NumberMP19L9K8Machine Type Model80XB000DUS Processor: 1x Intel Core i7-7500U Processor(Core i7-7500U): : Memory: 1x : : Operating System: (): : Hard Drive: 1x : : Wireless Network: 1x : : Ports: 1x 4-in-1 Media Card Reader (SD, MMC, SDHC, SDXC): : Camera: 1x : : Graphics: 1x : : Monitor: 15.6 3840x2160: : Included Warranty: 1 Year Depot Can someone help me see 4k in this laptop. I recieved it today from amazon.com.  I can return it and sue amazon and lenovo and seller if its not 4k. I do not know who is at fault. Normally when someone sell 4k ips screen they send it in 4k screen. its in 1920x1080 for weird reason and display settings do not show more than that resolution.  Lenovo say its 4k laptop from serial number. Can someone help ? pls.

Read other answers
RELEVANCY SCORE 47.2

Hi all, I've recently bought a Flex 2 pro, and I'm having some problem with the sound on it.Regularly, but with no obvious pattern, the sound goes quiet. After a moment or two it goes back to the regular volume. (Generally about the length of time it takes to turn the volume up)I've looked at all the sound settings and a similar effect is created by turning the Dolby digital enhancement off. This leads me to think that what is failing, but I can't find any instances of that online.I've reinstalled the sound card drivers (the most up to date ones), but that's been no help.Any suggestions or solutions would be great fully received.Cheers

A:Flex 2 pro sound issues

I have experienced a similar problem.It occurs at the start of an audio clip (never while it is already playing), almost exclusively through Chrome (although I rarely play music contained on the HD through Music Player so I can't rule it out). IMO, the sound card might be encountering difficulties switching between input sources (for ex. if I switch between tabs or go from one application to another). Symptoms: the volume stays low and the sound is somwhat distorted: the low and mid-range sounds are virtually muted out. This last anywhere between 5 seconds and a minute, and then the sound magically becomes clear again Attempted solutions:In instances where the sound doesn't begin playing normally again, restarting the laptop works.The drivers have been re-installed.    

Read other 1 answers
RELEVANCY SCORE 47.2

Hi, Recently I have purchased the Flex 5 14" laptop from Microsoft Store. I am noticing some hissing sound when I open some demanding application like Eclipse/Photoshop and when the fans start to pickup. I am not sure if that is a coil whine or something else altogether. Did anyone experience similar issue ? Could you kindly advise? Regards.

Read other answers
RELEVANCY SCORE 46.8

My Flex 3 1580 started to show messages about device being plugged into head phone jack (hence the on board speaker is cut off), and unplugged randomly, and then it just all stopped, there is no sound from speaker, but the sounds were fine if I plug in a head phone. I tried "troubleshoot" on Sound, it changed driver from Realtek driver to Microsoft High definition audio driver. The sound started to show up from speakers, but the volume keeps on fluctuating up and down, even when the volume slider keeps constant. Another troubleshoot was run, and somehow the problem was fixed. However, after some time (likely due to windows auto update), speaker becomes silent again. The Realtek driver was present in device manager.  I downloaded the most recent realtek driver from Lenovo support website, instealled it, still no sound from speaker (headphone works fine all this time). Tried to run trouble shooter again to install High Def Audio driver, the broken sound comes back to speaker. I plugged in a headphone, and the sound was normal, no volume fluctuation. But the speaker went silent again, when the headphone is unplugged.  Any one has any suggestion? I'm all ears. Art

Read other answers
RELEVANCY SCORE 46.8

I bought Lenovo flex 4 80VE000FUS, I observed small sound when I tap on touchpad, I can observe this working in a silent room. Seems there is a space between the electronics beneath the surface.  When tapping the surface there is a clicking sound produced. Can this be normal in all flex 4 or is this problem with mine. 

Read other answers
RELEVANCY SCORE 46

My sound on my Lenovo Flex-2 15 has not been working at all lately, despite the fact that I have downloaded both sound drivers. I have Windows 10, which I installed shortly after getting my laptopn refurbished in September 2015. (It came with 8.1.) Please let me know of any solutions that you have found to work. Thanks,Jeff

Read other answers
RELEVANCY SCORE 46

Okay first things first, I'm really sorry if I am breaking some forum rule here, and the fact that I have no idea where to put this situation category-wise. My laptop, a HP Pavalion 15-p213cl, which I believe I have had for a year or two now(I do not exactly remember...) is making some weird noise. Kind of like its vibrating. From some google searches... The problem may be because of the fan. Every time I try openin the laptop, the noise appears and it gets worse over time.Anyways I never had this kind of problem and since I'm not a tech guy... I am afraid to take this situation on based on some YouTube videos.Thanks.

Read other answers
RELEVANCY SCORE 45.6

Please help me. I have vista 64 but i can't find any driver for Canon LBP 1120. Help me because i don't want to buy another printer.

A:Canon LBP 1120

Hi EugeneBek,

Welcome to the forum.

Sorry, the only drivers I can find for the Canon LBP 1120 are the 32 bit ones. There are no 64 bit ones for this printer yet from what I see.

http://software.canon-europe.com/products/0000524.asp

Shawn

Read other 1 answers
RELEVANCY SCORE 45.2
RELEVANCY SCORE 45.2

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

A:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

Read other 8 answers
RELEVANCY SCORE 44.8

I have an Asus laptop for my main home office work station, and used a Chrome book as my secondary work station. Now, the Chromebook has begun to be terribly glitchy and useless. Will a Flex 3 1130 take Office 365 and become my new secondary workstation? Does it have the power, memory, etc. that I'll need? Thanks - 

Read other answers
RELEVANCY SCORE 44.4

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

A:Top Urgent Printer HP laser jet M 1120 MFP

Please dont double post, it annoys the moderators . Is it possible to remove the cartridge and then put it back, making sure its in firmly. Ensure its in exactly the way it should be. Is there a bit of covering tape left on the cartridge?
If that fails, Canon customer services.
 

Read other 1 answers
RELEVANCY SCORE 44.4

I just replaced the hard drive and both cooling fans. When the system is powered up the screen flashes between blue to black to gray to (red-green -blue-black horizontal lines) and repeats. I reset the bios still no change. I re checked all connections the board is getting power, i can push the eject on the DVD drive and it works, all fans come on just un able to get to bios screen. I tried powering up and hitting f10  repeatedly no change. There are no beeps what so ever on power up and while the system is on. The reason for the hard drive replacement was it just stopped working, but at the time I was able to at least get to the HP screen and troubleshoot the problem. I tried un plugging power to system holding the power button for five seconds, plugging back in still same problem. I can hit the print button on the keyboard and hear the computer beep, that is the only beeps i can get. 

Read other answers
RELEVANCY SCORE 44.4

Computer sees external drive, but the drive does not receive info or data

A:Can you use USB 3.1 with a Pavilion Slimline Model S5-1120, ...

Hi there @JPMESQ, I hope you find your Support Forum experience a positive one! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you have a question about USB compatibility. I am happy to help with this. According to the USB 3.1 specification, which is referenced here: USB - wikipedia.org, "The USB 3.1 standard is backward compatible with USB 3.0 and USB 2.0." So in terms of the connection it should work, but the performance will be limited by the slower standard. It is possible that some devices using USB 3.1, may not themselves not be backwards compatible, but that would be a case by case issue. I hope that addresses your question, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

Read other 1 answers
RELEVANCY SCORE 44.4

Hi,

I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
Dave
The Netherlands

A:Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

Read other 9 answers
RELEVANCY SCORE 44.4

Need a driver for 600-1120 I need ACPI\HPQ4000 specifically... is this driver included in bundled drivers? Any help appreciated











Solved!
View Solution.

A:Need ACPI\Hpq4000 driver for 600-1120

 Hi, ACPI\HPQ4000\4&15DD6BE&0  Original Fintek eHome Transceiver Driver ftp://ftp.hp.com/pub/softlib/software11/COL35151/pv-87085-1/sp49795.exe http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-600-Desktop-PC-series/4079692/model/4176607

Read other 3 answers
RELEVANCY SCORE 44.4

i got this canon lbp-1120, it was wworking fine, i did an upgrade to WinXpSp2 now the printer wont install,when i plug it in,the system detect it but i get this massage found new hardware printer installtion cannot be complated. Anybody with a solution to this problem,i 've downloaded the latest drivers and upgrade but it still wont work.
 

Read other answers
RELEVANCY SCORE 44.4

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

Read other answers
RELEVANCY SCORE 44.4

I have a Flex 2-14D Laptop Lenovo - Type 80EE and I need to reinstall the Operating System and all the software to the Factory Default Settings. how to do that? thank you.

Read other answers
RELEVANCY SCORE 44

Upgraded to Win 10 with no problems, I found that touchscreen is available only at login screen. I can type on the screen the password to log in or swipe the login image, or press the shutdown button on the screen, below right, or change the login user on screen. But as soon as I'm in the desktop (or tablet mode, I tried it) the touchscreen is not rworking anymore. As far as I can see touchscreen works perfectly even if there aren't officially  the drivers available for my machine,  I just would like to know how the enable the touchscreen in the desktop mode following the login. Thank you. Enrico










Solved!
View Solution.

A:Touchscreen of Touchsmart 610-1120 works only at login

Well I found it: there is a key in the registry that enable/disable the touch screen. I just set it and now it works with no problem at all, nor the drivers have been changed.

Read other 6 answers
RELEVANCY SCORE 44

Hello, I am attempting to connect my Leap Motion to this laptop. However, it seems like the USB ports are not producing enough power as the Leap Motion keeps telling me to reconnect every so often. I have tried it with a total of 3 other different laptops and the Leap Motion runs normal. Any suggestions? Is there a way to check exactly how much power my ports are passing throuhg? Or Has this happened to someone? The leap motion requires usb 2.0 ports +..  I am confused as why this laptop is having issues. Anything helps. Thank you, Abi

Read other answers
RELEVANCY SCORE 44

MY computer had been acting very slow for a while and nothing would start up, and if it did it would take literrally five minutes. Now it will not go to start up screen and it will stay on a black screen. I can move the mouse and I can see the mouse arrow, but no matter how long I wait, it just stays there. Any ideas on what to do?

Read other answers
RELEVANCY SCORE 44

I am looking to buy a RAM and Graphic Card for my Flex2. Where can I get those?

Read other answers
RELEVANCY SCORE 44

My Flex 3 laptop is only 4 months old. I went to power it on. I can see the LEDs in the keyboard light up, the power button light up and the battery light lights up. However, nothing displays on the screen. I can see that there is power to the screen because it lights up, but nothing is displayed. I tried connecting the laptop to my TV through an HDMI cord to see if it would display there and still nothing. I've tried turning it on bother on battery power and connected to AC adapter with same results. Any suggestions? I did a google search and saw where it was recommended to open up the laptop, disconnect the battery and wait a minute and reconnect. I wanted to just find out if there were any other solutions.

Read other answers
RELEVANCY SCORE 44

Seeking help with a cracked case for my Flex 2-15 laptop. Has anyone else had problems with the top case separating from the glass screen and cracking? The top has always been tight and a little tough to open which I feel has put a lot of stress on the case. Thanks in advance for any help! 

A:Flex 2-15 Laptop cracked case

Hi cstngrx4,
 
Welcome to the Community Forums.
 
If you have the needed tools for replacing the parts, you can review the hardware manual and service training module (highlighted) for the disassembly guide.
 
Locating and ordering the parts reference here.
Parts lookup page can also get you the parts (covers and/or mechanical assembly for LCD and hinge if needed) needed.
 
I haven't seen much cases in our community about cracking upper cover but I would agree that this may be a stress made to those area.
 
Hope this helps answer your query.
 
Regards

Read other 1 answers
RELEVANCY SCORE 44

LENOVO 80R3 Flex 3-1480 Display keeps shutting off at random times. I have already reinstalled Windows and shut off everything I could find in Windows that pertains to sleep mode or hibernation - I'll be in the middle of something and the display will go black and I am forced to hard reboot the laptop to bring it back. I have installed all the latest Microsoft updates - this is Windows 10 Version 1607 (build 14393.1066).

Read other answers
RELEVANCY SCORE 44

Hi All, Need some help regarding my flex 5 laptop. Got it 3 days from a deal from a retailer, laptop has everything I want except the display. The colors of the display are very much faded/washed out even on 100% brightness. faint blue looks gray, blue looks like teal. Quite annoying. I compared the screens with my old laptop ( T410) and there is a big difference in the colors. Is it due to the hardware or because of some windows/lenovo settings? Below are some of the details of the PC: Flex 5-1470 (Type 81C9) Laptop (Lenovo) Machine Model : 81C9000EUS 2GB NVIDIA GeForce 940MX Graphics Intel® Core? i5-8250U Processor 14" Touchscreen LED-backlit IPS FHD (1920 x 1080) Display Any help will be appreciated.

Read other answers
RELEVANCY SCORE 44

Hello, I recently purchased Lenovo Flex 5 (14") laptop (Part Number:  80XA0011US). This comes with 16.0GB DDR4 2133 MHz and 1TB 5400 RPM+128GB PCIe SSD.  My question is as follows: Can I upgrade the Hard Drive to more capacity like 256 GB SSD or 512 GB SSD in future? If yes, can I get this done via Lenovo Support or do I need to do it on my own? Basically, I just want to know if the System provides me the ability to upgrade Hard Drive - both HDD and SSD. 













Solved!

Go to Solution.

A:Regarding Lenovo Flex 5 (14") Laptop - Upgrade SSD and HDD Possible?

Hi dacoffee,
 
Welcome to the Community Forums.
 
Yes you may upgrade your Flex 5-1470 SSD to 256 and 512 GB capacity for your future need.
Tech support can only assist on information and the original parts tied on the warranty but not on doing the upgrade nonetheless you have us here in our community to help you do your upgrade if needed.
 
Hope this helps answer your query.
 
Regards
 

Read other 2 answers
RELEVANCY SCORE 44

It's Flex 2 - 14,
HD IPS + Nvidia version.
 
Warning: the laptop completely stops responding in my case. Only forced power-off works.
 
Could be 3rd party app, but cant think of any... and it's FN after all, that's system stuff.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

A:Flex 2 14 - laptop freezes when I press [Fn] + [=] anybody else?

Hi rightwig,          
        
Welcome to the Forums  
 
As per the query we understood that you are facing issue with system freezes in your Lenovo Flex 2 laptop.
 
Does the laptop freezes in the Lenovo logo or does it boots to the windows and hangs?
 
Also run the LSC (Lenovo solution centre) diagnostics and check for the errors.
 
Click here for the LSC diagnostics.
 
Let us know if this helps.
 
Best regards,         
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 2 answers
RELEVANCY SCORE 44

MY computer had been acting very slow for a while and nothing would start up, and if it did it would take literrally five minutes. Now it will not go to start up screen and it will stay on a black screen. I can move the mouse and I can see the mouse arrow, but no matter how long I wait, it just stays there. Any ideas on what to do?

Read other answers
RELEVANCY SCORE 43.6

I have a Compaq laptop on which the sound card has died. I have been in contact with Compaq and they can do nothing for me.

I was hoping to get a PCMCIA sound card, but they seem to be an extinct item. Does anyone have any ideas? I have WindowsME on the computer.

Thanks -
Karen
 

A:Laptop Sound Problem

Read other 9 answers
RELEVANCY SCORE 43.6

I have an Asus A6rp laptop. Did a format and installed Windows Xp with Service pack 3. Installed all drivers. The problem is that I am getting no sound.
From Asus I downloaded the audio driver and the UAA bus driver and Audio driver. It says to install the UAA bus driver and Audio driver (51mb) then the other audio driver(22mbs).

When I open UAA bus driver and Audio driver there is only patches there in many languages. But they are for service pack 1 and 2. I install the small file audio driver and it installs correctly and asks for a restart. When I do a restart I still have no sound.

In control panel i have a pci device with no driver. I installed all drives from Asus site.

I am really at a loss here. Any help will be appreciated.

A:Laptop sound problem

Please close this thread as I think its in the wrong section. Thank you.

Read other 1 answers
RELEVANCY SCORE 43.6

My sound is not working at all and I can't figure out the problem.

HP DV6810 Laptop
Vista Home premium

Symptom: Sound does not come through speakers or headphone jack. The "speaker" in the system tray has a red x.

I tried opening the mixer but it is greyed out. I checked the device manager and there are only drivers for bluetooth. (I'm not sure what those are for). I deleted those drivers and rebooted the computer. The system recognized the sound card but only installed the bluetooth drivers again.

Can someone give me some guidance?
 

A:Laptop sound problem

sounds like a driver issue to me. you need to download and install the latest drivers for your sound card from the manufacturers website. if you dont know who made it the download berlarc advisor. failing that all new laptops should come with a driver disk (assuming its new)
 

Read other 7 answers
RELEVANCY SCORE 43.6

I have an new hdtv (has vga in)/ pc in 3.5mm jack for sound. Here is the exact tv. My laptop has the vga and a headphone jack. When I hook it up (using vga and audio cables), the pic works great, but there is no sound. Are there any solutions to this problem?

I have small speakers that work if I hook them up, when I unplug the audio wire from the laptop sound from the laptop works fine.

(laptop is a toshiba I got last christmas)
 

A:Laptop to tv sound problem

Go into your menu and look closely at the Audio options. Look to see if it states in is Analog in or Digital in. Not for certain but would bet you problem lies in the way it is looking for an audio signal when in the VGA or PC video input mode.
 

Read other 1 answers
RELEVANCY SCORE 43.6

I have problem with sound on my laptop after I download windows 8 on my laptop. I could not hear any sound at all. my laptop model is dell inspiron 1420(old model) and it previously run windows xp. why is that happen? is it not compatible with my lappy or else? can you help me to solve this problem ? I have no idea at all to solve this thing. thanks a lot .

A:I have problem with sound on my laptop

Hi Mieza,

I had the same problem with XP (No Sound) at all after Win 8 pro Upgrade..
Thing is I looked that hard I forgot the link Page.

This is the Microsoft (Hotfix) link, but like I said can't remember the site.
Hotfix link..(http://hotfixy4.microsoft.com/Windows%
20XP/latest/UAA HD Audio OOB release/5011/free/198658 intl i386 zip exe

You Download Hotfix, It will upload to your C:/ drive.
Goto settings..Device manager..Network controller, in their you
will see (Update Driver) click (Update Driver) and if will install (Xear 3D) CMI Audio.

You should. have all bells ringing.

I also have no (Wifi) Win 8 knocked out my (Creatix 802 11g) Driver.
Cant find a replacement yet.

I Have the zip folder on my deasktop, if any moderator can tell me how
to upload it, (198658_int zip).

BF.

Read other 4 answers
RELEVANCY SCORE 43.6

i installed windows xp on my laptop and the sound doesnt work. it says there is no sound card installed but the sound was working before i installed xp.

what is wrong with it?

A:laptop sound problem

You need to go to the manufacturers web site for that laptop,
dowload and install the drivers.

Read other 2 answers
RELEVANCY SCORE 43.6

I have a sound problem with my Hitachi laptop. It's about three yrs. old. Just last night, the sound was working perfectly. Today, when I turned it on to play an MP3, it played it, but softer and fuzzier. And later today, it no longer plays at all. How can I fix this?

update: now I get a message whenever i try to play an MP3 saying "mmsystem032 the specified format cannot be translated or supported. use the capabilities function to view supported formats." I have the format set up for MP3. What's with this, too?
 

Read other answers
RELEVANCY SCORE 43.6

Hi. I am having problems with the sound on my laptop. It keeps keeps cutting out whenever I am loading games. The game in question is Sims 3, the only one I have installed at present so I can't test it with anything else. Saved games take a long time to load with this game, and I am quite used to the sound cutting out a few minutes before loading finishes, so at first I thought nothing of it. But when it had loaded I found there was still no sound. Game problem? No, because when I closed the game down I found the computer had no sound at all!

I ran troubleshooting but it couldn't identify the problem. Restarting the computer doesn't help either. How can I get my sound back and keep it back?

Here are my specs:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz, Intel64 Family 6 Model 55 Stepping 8
Processor Count: 2
RAM: 3982 Mb
Graphics Card: Intel(R) HD Graphics, -2040 Mb
Hard Drives: C: Total - 381545 MB, Free - 317821 MB; D: Total - 550703 MB, Free - 550543 MB;
Motherboard: ASUSTeK COMPUTER INC., X553MA
Antivirus: Windows Defender, Disabled
 

A:Sound Problem on 10 Laptop

Read other 6 answers