Over 1 million tech questions and answers.

Questionable Build Quality on brand new ThinkCentre M920s?

Q: Questionable Build Quality on brand new ThinkCentre M920s?

I recieved my new ThinkCentre M920s and noticed two defects shown above in the photos:- 1. The headphone jack appears pushed to the side with a sharp copper wire sticking out of the hole 2. The vent to the right appears bent and misshapen My question is, am I being too picky about build quality or are these legitimate issues? Are they even issues at all actually or is there a legitimate reason that a sharp copper wire should be to the side of the headphone jack? Is the vent to the right bent and misshapen or is it supposed to be "curved" or something? I spent over 1250 ($1630 American) on just the tower alone, so I expected a premium product. Thoughts appreciated!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Questionable Build Quality on brand new ThinkCentre M920s?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 74.8

SCCM Windows 10 boot Lenovo Thinkcenter M920S after booting automatically restart how we solve this issue

Read other answers
RELEVANCY SCORE 74.8

Hello every one, I will get a new ThinkCentre M920s and I would like to upgrade the video card (NVIDIA GT 730) with a superior model. Do you know what models of video cards can be placed on that computer? Or where I can get that information? Thank you for your help!  

Read other answers
RELEVANCY SCORE 68

hey all,

after reading the owners' reviews of the Z170-A on newegg, i was shocked to find the amount of DOAs and reports of poor service form ASUS after having encountered a problem.

how prevalent / true is this? it seems like poor and declining QC is a common thread among all the reviews...

should i still go ahead with getting the Z170-A or should i consider another model / manufacturer entirely?

any recommendations?



parts i have so far
- 6700k
- EVGA 1060
- Kingston DDR4 16GB 2133mhz

im planning on keeping this stock for a couple years and may do light overclocking in the future

A:questionable ASUS Z170-A quality

I can most definitely confirm that Asus customer support is sub par.

But on the other hand they are very quick to chat and get your issue resolved.

I`ve never gotten a dead board out of the box, but if you damage a board you will not get a new one unless you buy a new one, you will get a re certified board.

Other then that my Z77, Z87 and Z170 have all performed just fine.

The Z170-A is a fairly cheap board

Read other 5 answers
RELEVANCY SCORE 57.6

what is the best quality ram brand?

If you have trouble deciding.. feel free to vote randomly.

I bought PNY ram and non-PNY brand inside. Will never deal with PNY again.

ps. whats the difference between Kingston and Kingston HyperX?
 

A:best quality RAM BRAND?

I chose Kingston

Because my asus board recommends it.
Check your manual for it's recommended RAM.
 

Read other 10 answers
RELEVANCY SCORE 56.4

Hello everyone,first post here. We have 70 lenovo thinkcenter (M90, M700, etc ). For the first time I have a problem with a PC that I just unpack. That's a Win7Pro upgradable to Win10Pro. But when I start Windows update the screen is like that (see screeshot) since friday now. I have found several solution with Google but no one work.Have someone an idea for help me?Thank you.


























Capture.PNG ?86 KB

Read other answers
RELEVANCY SCORE 55.6

Hello there,

I recently built myself a new pc and switched from a laptop. My headset is the Razer Kraken 7.1 V2 and they worked perfectly fine on my laptop and the microphone quality was good.

However now on my new pc it is very very poor.

I have tried A LOT of things to fix this; updating drivers, reinstalling drivers, rollbacking drivers, installing HD Realtek audio drives, setting defaults.

I really don't know what to do at this point. I have also tried different headphones and the problem still exists.

EDIT: The sound has been described to me by friends as very "tinny" or like im at the bottom of a well or muffled. I have tried various settings within the Mic tab in razer synapse and none of this has fixed it.
 

A:Microphone/Headphones awful quality on brand new pc

Hi, and welcome to TSG.

I may not be able to offer a solution, but someone else here may be able to offer a solution if you gave some more details beyond "poor" as to the exact nature of the problem (low volume, distortion, hum, buzzing noise, other type of noise, etc).
 

Read other 2 answers
RELEVANCY SCORE 55.2

i just bought my pavilion laptop yesterday to replace my hp pavilion envy dv6 and the audio quality is very poor on my new laptop. its very tinny and noticabely lower quality than i had before. The audio settings also only account for one studio quality Hz setting, which does not offer me te ability to change it as other have been suggested to, i have downloaded the latest drivers and am very unsatisfied with the speaker quality. its hard to enjoy anything im watching or listening to as account of them. help would be appreciated, thank you.

Read other answers
RELEVANCY SCORE 55.2

Hi all,

I'm thinking of upgrading or adding more Ram to my machine, my machine is custom built with a off-brand 1 GB Ram (2X512). I heard a lot about Corsair's line of memory modules, I would like to invite a few of your expertise opinion before purchase. I have 2 questions:

1. Is Corsair's product better?
2. Is there a difference between 1GB (2x512mb - 2 modules) and 1GB stand alone modules in running a P4 3.2GHz HT (Dual Channel) Processor on WinXP Pro?

Thanking you in advance!
 

A:Will the quality of named brand Memory (eg. Corsair) makes a different ?

Read other 7 answers
RELEVANCY SCORE 54.8

I just received my new machine, and I also purchased the Next Business Day 2 year warranty.  Talk about USELESS! For starters the machine wouldn't recognize any of my Monitors.  It's just a BLACK screen.  After many troubleshooting attempts, I finally called Tech Support.  Apparently this is a HUGE PROBLEM.  A service ticket was submitted and the "REPLACEMENT PART" ordered. Long story short, I'm returning the machine.  The inability of the repair service personnel to provide answers to my questions is TOTALLY UNACCEPTABLE.  I expected ?top notch service? and got nothing but excuses. I?m EXTREMELY disappointed by the ?LACK OF CUSTOMER CARE?.  NBD warranty should be Next Business Day, not ?uncertain? because the company can?t get the part.  As I explained to 7 different representatives this morning?The fact that there is a ?BACK ORDER? for this particular part with no ETA tells me that this part has ALWAYS been a problem for Lenovo.Lenovo needs to find another supplier for this hardwareLearning that the actual machine is manufactured in Mexico, and has to ?clear CUSTOMS? is another REAL problem?at least for this AMERICAN.More often than not, ?Cheap Labor? usually produces a ?SUBSTANDARD product?.Please forward this feedback to the CEO and other management personnel as deemed appropriate.

Read other answers
RELEVANCY SCORE 52.4

I've been buying thinkpads for years. This is my third thinkpad that I've ordered personally (asides from the ones we've received for our teams at work), and I also have a Yoga. I've been disappointed with it so far, and was wondering if anyone else has noticed a serious drop in Lenovo's product quality? I ordered a custom build T490 with the 500nits QHD screen. It took 3 weeks to arrive, after several different delivery dates which left me staying back at the office late on 3 different days unnecessarily to receive it. When it finally arrived it had the following problems:1. Touchpad randomly registers right clicks when left clicking - even with all gesture modes disabled, this still happens. The only solution is to roll back to a very basic microsoft driver, but then two fingered scroll doesn't work. Seems a hardware problem. 2. Small line of dead pixels in the centre of the screen. It looks like a small hair trapped under the glass surface. How did quality control not spot this?3. Overall build quality seems shoddy. The screen isn't even fully sealed at the top, so on one side I can see light from the display leaking out between the cracks. Again, how did this pass quality control? So disappointed after spending 1500 USD and waiting weeks for a custom build thinkpad only to have several problems and expect it to be taken away again.I have premiere support so have opened a ticket, but really I just want to send the thing back.My old T410 is still running like a ta... Read more

Read other answers
RELEVANCY SCORE 52.4

Hi All,I currently have a Lenovo ThinkPad T500. I've had this since 2009.I live in Manchester (UK).I'm currently hoping to buy a new laptop and I'm considering a T560.However, I can't find any reseller that carries this item in stock so I can have a look at the build quality. Lenovo won't help either. Not very good really; I don't know why I'm bothering to even ask this question if the company doesn't make these units available for people to see before purchase.Can anyone tell me how the build quality of the T560 compares with the T500.ThanksJamie

Read other answers
RELEVANCY SCORE 52

I got my Yoga 260 few days back, and there are couple flaws in the build quality bothering me. 1. There is a little bulge by the "yoga 260" logo on the screen casing above the hinge. It's unnoticeable by eye unless you look for it.2. Te rubber thing around the screen doesn't seem to be glued(?) on all that well. It's not really a problem, but it's bothering me. Should I take the laptop to warranty repair.

A:Yoga 260 build quality problems

Hi, welcome the forums.
 
I don't have that Thinkpad, but maybe you can share some pictures of what you are saying to see if other owners has the same issues.
 
Regards

Read other 1 answers
RELEVANCY SCORE 52

To keep it short, I've been using my Yoga for less than a week and the screen has been cracked twice without once being dropped or mishandled. The first occured the first time I put it in tablet mode and the second when I was putting it in the lenovo sleeve with the screen out and now I've completely lost touchscreen functionality on the right fourth of the device. I live in the middle of nowhere so there's almost no way for me to get it repaired under warranty. What can I do to solve this problem?


























20170425_194729.jpg ?4882 KB

Read other answers
RELEVANCY SCORE 51.2

Hello,

I ordered a PC and paid for it last month. It arrived in a warped case over two weeks ago so I returned it for it to be rebuilt.

Original Condition:
http://i117.photobucket.com/albums/o62/soldbylindal/PCsideoff.jpg
They've just shipped it back to me today in a different case and now the Floppy drive is not flush at the front like I believe it should be and instead, it is set back 3cm deep into the case so there is a significant gap. Am I right to say this is not satisfactory quality, and will it just mean dust gets straight into the case?

Images of the floppy drive:
http://i117.photobucket.com/albums/o62/soldbylindal/Floppy1.jpg
http://i117.photobucket.com/albums/o62/soldbylindal/Floppy2.jpg
http://i117.photobucket.com/albums/o62/soldbylindal/Floppy3.jpg

An internal image:
http://i117.photobucket.com/albums/o62/soldbylindal/Internal.jpg
I would welcome more expert opinion. Thanks.
 

A:Opinions requested on quality of PC build received

Read other 16 answers
RELEVANCY SCORE 51.2

I have bought this litle laptop just a month ago and I have had so many issues espesially on the build qualityAt first there was a whinning sound on the screen after the bightness gets bellow 95%  also the trackpad was moving by itself randomlySo I would send it back to Lenovo after the hollydays were oven (because I needed a computer to study as I was away from home).On this month I got sooo many issues:-The "U" key broke off as I was typing-The spacebar key is only registered if I tap it with some force on the center -The left  click on the touchpad was not placed at the same height (I didint notice at first) so it's not as taptile as the right click -Screen sometimes will remain black on boot  so I will have to forceshutdown-And the blue paint on the back gets off!!I regret so much that I didnt return it earlier as the may put the blame on me for those issues...  

Read other answers
RELEVANCY SCORE 51.2

4 Years ago I bought the Lenovo iDeapad y50-70 (960M version). Worked perfectly, but after a little over 2 years (right after the warranty expired, of course) I had to clean the fans. So my dad and I found out a screw was missing and two were not the right ones. Fine by me, we opened the back and cleaned out the dust. Not even a year later, the plastic edge around the screen started to come loose and one speaker's mid stopped working. The touchpad doesn't seem to respond from time to time and after just putting an ethernet cable in the ethernetport ONCE, it broke off leaving a couple parts wander inside the case which eventually broke a fan blade off.  Now either I have extremely bad luck since the only thing I do with my laptop is put it inside a backpack with a protective case around it, or the build of this laptop is extremely poor. My boyfriend has the iDeapad y700, can't say that he takes good care of his laptop, but his is a far higher quality build yet with the same specs.  My question is is if I am currently the only one having these issues? Or am I just having extremely bad luck? And do I need to replace the fans? If yes, where can I find replacements since I can't find any in the Netherlands.  I am kind of desperate at this point, since I do really like this laptop besides the cons it has now. Thank you in advance.   

Read other answers
RELEVANCY SCORE 51.2

I am on my third Yoga 710 14" unit, all of them had different build quality issues. One was bent, another had a crack between the bottom and top of the chassie, both from factory. On the new one it only took a few weeks before I noticed new problems.  The laptop makes a lot of noise and creaks whenever I lift it up, open or move the screen lid, just change its position on my lap etc. It makes these cheap creaking noises often seen on very cheap old laptops and toys, but this computer is very expensive so it should not do this. It is not a very loud noise, but you can hear it almost all the time unless the laptop is stationary on a table etc. it is espesially noticable if I lift it up and rotate or mildly shakes it. I've never experienced this before, unless it was a very low end laptop. Have any of you encountered this issue before? There is also quite a bit of light bleeding in the top right corner.  It feels very cheap when it makes noises and creaks like that when I simply pick it up. 

Read other answers
RELEVANCY SCORE 51.2

TO CEO LENOVO HellosirI have bought and yoga series laptop (Y50-70) On 23/7/15 the laptop which I bought in one week of my buying date my system hard drive  got crashed I took my laptop to the service center in Chennai where they took more than a month to repair my product  ( they didn't replace my product but as per company policies  they could ) then they replaced my hard drive and gave me the product then again in 2017 again I had a issues with the laptop keyboard & touchpad  it stop working  so again I had to vist the servies center in GUWAHATI (Assam) then they took 20 days to repair my product the replaced my front panal & keyboard then system was fine but this year on 21/01/2018 while useing I got n burning smell  inside of the laptop so i switched off then I have called the customer support I told them about the problem and i asked them if they can please replace my laptop because I have invested lot of money in this laptop  around  Rs 1 lac (1572 us dollors) and for this i cant run to servies center time by time then they told they cant replace my laptop now I was very disspointed  (next day again had to visit the servies center they inspected my case they told me they need to replace the motherboard they took 2 days and repalced my montherboard .) then when I went to the servies center  they showed my laptop I check my system and what I found all my screw of my system were not pr... Read more

Read other answers
RELEVANCY SCORE 51.2

Hi everyone - I am having one heck of a time with these ThinkCentre M90p units when trying to upgrade to the latest (Creators) build of Windows 10.  They keep losing the MBR and thus show the primary partition as "RAW" instead of NTFS as it should be.  This happens about half way through the upgrade when the system reboots.  It comes up to a BSOD 0XC000000F immediately upon attempting boot - this is, of course, because the primary partition is unreadable. Now, I have seen at least 8 of these systems do the exact same thing.  All hardware passes diagnostics with flying colors, so I know it's not a failing hardware issue.  I have done some Googling and have found where other people are having a similar issue, but none of them mention this particular model of Lenovo ThinkCentre. To test further, I did a FRESH install using an Anniversary build (1511) and then ran the latest upgrade to Creators (1607) from inside the freshly installed 1511 build.  The same problem occurs every single time.  Any ideas?  I know some of the posts I've found online state that running Windows in UEFI mode with GPT takes care of the problem.  The issue is that these units do not support UEFI (at least from what I can tell...)  Thanks in advance for any assistance that you can provide!

Read other answers
RELEVANCY SCORE 50.8

Hi, I own ThinkPad L450 since 10 months ago. I am very disapointed with the quality of plastics it is made from. It would maybe not be the issue if following did not happen: 1. LCD started to flicker and it needed to be replaced 2 times2. I did have to pull the HDD out and in for 2 times The problem is these notebooks are most likely to designed to be never opened (you should not exchange HDD, RAM, whatever...). As I mentioned - after 6months LCD started to flicker - lenovo replaced it under warranty. After 1 weeks the problem was again present - so they again replaced also LCD cable. Before both repairs I took the HDD out of the notebook due to security reasons. SO altogether 4 x opening the case. When you open L450's case more times (I think also 1st time is the issue) you will most likely broke one of the tiny plastic latch which holds the back cover aligned and tight with the palmrest. So the result of these excercises is I have at least 3 latches broken, there are gaps between the 2 plastics parts...Plus extra - they had to dismantle the LCD bezel 2 times, so even there - I have gaps between back LCD cover and the bezel... Nothing critical, but I would not await laptop which costs ~1000 EUR to have such built quality. I had ~500EUR laptops which I opened 10 times (cleaning of the fan, adding ram, etc...) and these had no such issue.. Sorry Lenovo, but I thought L series have better built quality and if it break under warranty ... Read more

Read other answers
RELEVANCY SCORE 50.8

I just built my system and the power doesn't stay on, so here's my very first post.
The fans spin about once, and the POST shows FF (bootup) for a half sec, then everything goes dead. I have to shut off the PSU to try again and the problem repeats.
I tried the PSU on an older MB and it worked, but that may not mean much since the old MB doesn't use the 4 pin power connector only the 20. Unplugging everything but the CPU and memory didn't help. I even tried it w/o the memory. I also tried it with an old PCI video card. Same result.
I'm thinking the MB is sensing a short (I'll uninstall and do a careful visual check) or a missing fan (my 2 case fans don't provide a sensor feedback to the CSYSFAN or CPWRFAN connections, but my CPU fan uses the 3 pin CPUFAN connector) or maybe the MB thinks something's too hot (obviously wrong). Any other ideas?
specs:
AMD 64 3000
EP-9NDA3J
2x512MB Kingston DDR
All-In-Wonder 9600 AGP
sound on MoBo
450W PSU
DVD RW and 3.5 Floppy
Gregor
 

A:Brand new build, Power only comes on for 1/2 sec

Are motherboard stand-offs being used?
 

Read other 26 answers
RELEVANCY SCORE 50.8

Hi, I am having some issues with a brand new Windows 10 build. It was built at a local shop and the first thing we did once we realized there was a problem was take it back and have them check the hardware. They say that the hardware is all fine and the issue we are having is software related.

The issue is that at all times the CPU is being loaded heavily. This is with zero intensive programs running in the background. The processes that are the main culprits taking between 10%-40% of available CPU resources are Service Host:Local Service(Network Restricted) and Service Host: Windows Audio Endpoint Builder. I have tried many of the common solutions online (Disabling superfetch, Fixing memory leak, Audio Drivers, running chkdsk,) all to no avail.

Here are the full system specs.

Intel i7 7700K
Asus Prime Z270-A
Kingston Hyper X Fury 2133 32GB
Samsung 960 Pro 512GB
EVGA 1080Ti FTW3
EVGA SuperNOVA 850W PSU

Any Ideas would be greatly appreciated!

A:Brand New Build Issues

Ended up figuring out that one of the default drivers that windows installed for a complex sound card/line in setup was causing the issues. Removed and updated it and it fixed the problem! If anyone else has this problem, boot to safe mode to see if its a driver issue and if it is just start eliminating drivers one by one.

Read other 1 answers
RELEVANCY SCORE 50.8

Hi all. Situation, Problem(s), Thoughts.

Situation:

Just built new computer with:

Problems:

- Computer will turn on for 1-3 seconds and then turn off. This continues to happen until I unplug/flip switch on PSU.
- Tried another known working PSU (600watt) and still same issue.
- Tried PSU with another tower, powers tower without issue.
- Reseated all components (including processor/Heatsink)
- Unplugged all but 24pin and 8 pin.
- Tried different outlet.

Thoughts:

- At the moment I have requested an RMA for both CPU and Motherboard - Approved by NewEgg
- The motherboard does not have onboard graphics, which makes me nervous. Although I have the 460 graphics plugged in, so this shouldn't make a difference.
- Is there anything else I could try?

What do you guys think? It really could only be the processor and/or motherboard. Just seems so strange to have these faulty from day one.

Thanks guys.
 

A:Solved: Brand New Build - On, then off.

Read other 12 answers
RELEVANCY SCORE 50.8

Hi, I am having some issues with a brand new Windows 10 build. It was built at a local shop and the first thing we did once we realized there was a problem was take it back and have them check the hardware. They say that the hardware is all fine and the issue we are having is software related.

The issue is that at all times the CPU is being loaded heavily. This is with zero intensive programs running in the background. The processes that are the main culprits taking between 10%-40% of available CPU resources are Service Host:Local Service(Network Restricted) and Service Host: Windows Audio Endpoint Builder. I have tried many of the common solutions online (Disabling superfetch, Fixing memory leak, Audio Drivers, running chkdsk,) all to no avail.

Here are the full system specs.

Intel i7 7700K
Asus Prime Z270-A
Kingston Hyper X Fury 2133 32GB
Samsung 960 Pro 512GB
EVGA 1080Ti FTW3
EVGA SuperNOVA 850W PSU

Any Ideas would be greatly appreciated!

Read other answers
RELEVANCY SCORE 50.8

So i just finished building a new pc, everything was fine for the first day. I stress tested all of the hardware and checked for errors. No problems. I then overclocked my processor and stabilized it (pretty easy on these new intel chips) and set up a game to download then went to bed.

When i woke up i was on the login screen and windows reported an unexpected shutdown.

I don't believe this is overclock related, i think it may be a driver or other hardware issue. One of the blue screen reports was something about a sata driver.

Ill run through the BSOD sticky steps now.

? OS - Windows 7 SP 1 64 bit
? Age of system- All new but the hard drives/dvd drive
? Age of OS installation -fresh format and reinstall with all updates
? CPU-i5 3570k
? Video Card-Radeon HD 6870
? MotherBoard-Gigabyte Z77X-UD3H
? Power Supply - Corsair TX650 watts

A:Brand new build BSOD

I dont see a way to edit, but based on benchmarks my hard drives are running 10-20 MB slower than they were in my last system.

Not sure whats going on there.

Read other 19 answers
RELEVANCY SCORE 50.8

Hi all,

So it has been a very long time since I built a PC from scratch, last machine I built was a CompuPro S-100 system running Concurrent CP/M ! I am building a new box primarily for doing video & photo editing using the new 64 bit versions of Photoshop and Sony Vegas. I have just about finished the physical installation, today I will run the pump for 24 hours to check for leaks and tomorrow I would like to begin setting the box up.

Configuration: I have an Armor LCS cabinet w/ CPU and GPU cooling blocks, 750 watt Corsair PS, Intel DX38BT mobo, Q9550 CPU, 8 gig of Kingston 1333 DDR3 ram ( the only one actually recommended for this mobo), 1 Sony & 1 TDK DVD/CD RW drives (ATAPI), 4 Seagate 650gig SATA drives for a raid 5 storage array, 1 150gig SATA Velociraptor for the system, and 1 WD 150 gig SATA Cavier as a scratch drive, an EVGA 8800GT video card ( Vegas does not take advantage of a GPU except for some effects add-on packages ), HP 24" widescreen digital monitor, and Sony 19" analog flat screen monitor, and Full Vista Ultimate package.

My questions start with:

Once the Hardware is all installed what NEXT? I have heard that I can only put in 1 stick of memory until the OS is installed then add the others, but even before that what are the steps for configuring the mobo once the power is added? How hard is it to set up the RAID and is the built in RAID controller any good with Vista64?

Next the scratch drive currently is full of data from an XP... Read more

A:Brand New Build, Suggestions Welcome

Just a few comments from a retired computer builder.

SATA2 is mandatory for any new system today, but why RAID?
That's a killer if it goes sour on you.

I was given a Dell XPS 400 that Dell wrote off as "Broken and beyond repair" just because the two-drive RAID system was corrupted.
I reprogrammed it to operate on single drives and set up Vista Ultimate on the little PC.
I doubled the original 1 gig of ram and Vista is running satisfactorily on the PC today.

Over the years I've tried a RAID setup on several occasions and every time I've torn it down and gone back to a single drive for my OS. For the home computer user there is NO advantage to using RAID, except to tie up more drives to do the same job.

With so many drives and all that ram, you're going to have one heck of a heat problem. And, you can't stack those drives or the bottom ones will roast the top ones.
Also the current draw on the PSU will be considerable. A 750w supply won't produce that much power 'all day' so I'd want to go higher yet on the PSU.

You're also going to want to increase cooling as much as possible.
I'm currently running five case fans in my own system to bring in fresh air and to exhaust the heat from my three HD's and 3 gig's of ram. I had to do some cutting and drilling to get that many fans installed.
Every one of my three HD's has its own Two-Fan cooler and I've added a larger cooling fan to my 128meg Video card.

Also, Video cards today, generate a LOT of heat, that must be... Read more

Read other 4 answers
RELEVANCY SCORE 50.8

I just finished building a new PC, and now I have been getting BSOD from time to time. I have flashed the BIOS, and downloaded correct drivers but it does not seem to be working. I am going to do a mem test here soon, but hoping some one a little more experienced than myself can lend me a hand and point me in the right direction.

Will upload a dump file, sorry I have to keep it short for now, BSOD wont give me a chance to fully explain.
Specs:
ASUS P8Z68-V Pro Gen 3
Western Digital 250GB HD
Corsair Force 3 60GB SSD
16GB G-Skill DDR3 1333 Ram
Intel i-5 2500K
Windows 7 64bit OS
 

A:Brand new build, BSOD

Read other 6 answers
RELEVANCY SCORE 50.8

I was in Photoshop editing some photos, and was chatting with someone on Skype when suddenly I got a BSOD. The computer restarted before I got a chance to read what the BSOD said, but I did make sure to run a scan after the computer came back up. Any help would be appreciated.

A:BSOD on brand new build

- It's your Logitech Camera Driver at fault

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff88006d85fc6, fffff88003b7f758, fffff88003b7efb0}

Probably caused by : lvrs64.sys ( lvrs64+2fc6 )
Update those: Support + Downloads

- Recommended to update these Drivers also:

Code:
fffff880`03b7e6f8 fffff880`04e4c1acUnable to load image \SystemRoot\system32\DRIVERS\asmtxhci.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asmtxhci.sys
*** ERROR: Module load completed but symbols could not be loaded for asmtxhci.sys
asmtxhci+0x4c1ac

Code:
fffff880`04e00000 fffff880`04e64000 asmtxhci T (no symbols)
Loaded symbol image file: asmtxhci.sys
Image path: \SystemRoot\system32\DRIVERS\asmtxhci.sys
Image name: asmtxhci.sys
Timestamp: Thu Nov 03 10:00:22 2011 (4EB203C6)

Asmedia USB 3.0 Driver ASMedia Technology Inc. ????


Code:
fffff880`03b7ea80 fffff880`05b046a9Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xe96a9

Code:
fffff880`05a1b000 fffff880`064c3000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sun Feb 10 06:13:08 2013 (5116D804)
nVidia Video Driver Drivers - Download NVIDIA Drive... Read more

Read other 5 answers
RELEVANCY SCORE 50.8

Recently i built a new computer and it doesn't boot. I checked if the psu is faulty by using it to another computer and it worked. I'm 100% sure that i have the right cables pluged in. When i press the power button the power light turns on but nothing happens, not even fans are working. I feel like there is something wrong with the mobo but i am not sure. Help

Specs:
~mb=? Gigabyte ga-ab350m-ds3h v2
~cpu=? Ryzen 3 2400G
~ram=? one 8gb stick
 

Read other answers
RELEVANCY SCORE 50.8

So I have just built my first PC, mostly brand new parts (excluding the memory) but when I press down the power button, the fans and LED's start up and then start pulsing as if there isn't enough power getting to them, nothing shows up on the monitor and when I remove my finger from the power button it shuts off again...I have no idea what's happeneing... Please help thank you

Parts list:
Power supply: Corsair VS550
Motherboard: gigabyte GA-Z97P-D3
CPU: Intel i5 7600k
GPU: Geforce GTX 1060 6GB
CPU cooler: Cooler Master hyper 212 EVO
Memory: 2x8Gb hyper x fury ddr3 ram
 

Read other answers
RELEVANCY SCORE 50.8

Hi everyone,

I just recently built a new computer and it freezes randomly. Very annoying!! Mouse cursor and keyboard freezes.

Pc specs:

Motherboard: Gigabyte B150M-DS3h socket 1151
RAM:Crucial Ballistix Sport LT 8GB DDR4-2400
CPU: Intel Core i5-6500
Power supply: Corsair Builder 500W
graphics: XFX Radeon R9 380X 4GB DD
Hard drive: Seagate Barracuda 1TB 3.5" 7200RPM and Sandisk SSD PLUS 240GB 2.5" Solid State Drive

I don't know much about computers so any help would be greatly appreciated!

A:Brand new build PC freeze up

Does the cursor and keyboard freeze up when you are in safe mode?

Read other 1 answers
RELEVANCY SCORE 50.8

Hello,
i just built a brand new gaming rig, and when i tried to start it up, i got nothing. no lights, beeps, or spinning fans. I am sure i have all of the cables installed correctly, even had a technician come check it out. no dice.

i am wondering if the mobo or the psu were DOA, or if something else is the matter.

any help is much appericated.
my gaming depends on it!
 

A:Brand new build won't even start

I would first check to make shure that your power button is working properly. You can test this by jumping the two prongs coming out of you Moboard that go to your button.

if it still dosent work then find a new psu to try in your rig.
 

Read other 7 answers
RELEVANCY SCORE 50.8

Hello All,
I have been wrangling with a random BSOD for about 2 weeks now on a brand new build. All components are 100% new except for two Caviar Green drives in Raid 1.

CPU: Intel i5 3570K
Motherboard: Asus P8Z77-VLK
Ram Speed, size and #sticks: 2 X 4GB GSKILL Ares DDR3 1600
GPU: none (using iGPU)
PSU (do not leave this out):Rosewill Hive-650 semi-modular
OS: Windows 7 Home Premium
Boot Drive: Samsung 128 GB SSD 830 Series
Storage: two Caviar Green drives in Raid 1.
Optical: ASus 24X DVDRW

I experience BSODS often, at least twice a day. Never while I am at the PC (generally while sleeping and at work) Since this new build I have been trying to transfer my media files from my backup to the raid array- One folder in particular is huge, 452GB. So I set this to transfer before I go to sleep or leave for work. One out of every two times I try to transfer this I get the BSOD. I have run:
MEMTEST86+ for the recommended 7 passes, two times with no failures
I have run check disk multiple times with no errors
I re-installed windows fresh
Driver Verifier fails immediately after enabling it and rebooting
I narrowed down the driver causing the failure to Ndisrd.sys
If I disable this driver my Ethernet stops working
this caused me to look into this drivers effect on ethernet and I stumbled accross this website:
http://driverscollection.com/?aid=44016157152a8cde525d7f7a510
as you can see this driver is installed with the motherboard drivers CD and is part of network Icontrol which is m... Read more

A:BSODs on brand new build

The minidumps are:
PAGE_FAULT_IN_NONPAGED_AREA
TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
SYSTEM_SERVICE_EXCEPTION
all with Ntoskrnl.exe

Is the SSD boot drive set as AHCI in the bios and on a SATA 3 port?
 

Read other 19 answers
RELEVANCY SCORE 50.4

I PURCHASED A LENOVO 320E LAPTOP AND UNDER A WEEK...1. THE PLASTIC BODY TENDS TO MAKE CRACKING NOISES WHEN A LIITLE BIT OF HEAT IS EMERGED (while playing any games/charging).2. THE LAPTOP LID BEACAME A LIITLE BIT NOISY DURING OPEN/CLOSE.3. MOUSEPAD IS RATTLING/LOOSE BUT FULLY FUNCTIONING.4. THE FRAME AROUND THE SCREEN HAVE GAPS BETWEEN THEM.ARE THESE ISSUES NORMAL.?DOES THESE ISSUES CAN BE FIXED UNDER WARRANTY?HELP!

Read other answers
RELEVANCY SCORE 50.4

@Amy_Lenovo, @Mark_Lenovo: My Yoga 260 has developed a number of build quality issues after less than 1 year of ownership (see below). I had purchased an on-site NBD upgrade with ADP, but support tells me company policy is that if a service tech needs to repair more than one part, the device has to go into the depot. Seems a little nuts that we?d be penalized for Lenovo?s poor QC in that way. I can?t be without this unit for a week. Has anyone a) heard of this one-part policy for on-site service before, or b) had any luck getting Lenovo to service multiple parts on-site? Thanks!  My unit is suffering from the following: -Screen bezel has cracked around hinge (identical to issues described here: https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Thinkpad-Yoga-14-cracking-around-hinges...) -Body has cracked above pen silo (described at www.notebookcheck.net/Lenovo-ThinkPad-Yoga-260-20FD001XGE-Convertible-Review.158707.0.html, https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Yoga-260-cracked-at-pen-slide-in/m-p/33...) -Hinge cover is completely loosened and clacks around (2 reports at https://www.reddit.com/r/thinkpad/comments/4qxkqf/i_know_people_say_that_the_yoga_260_has_a/) -A couple of my keyboard keys are mushy, and my fan is very high-pitched? I can see through the fan vent that the fan assembly foam is ?scrunched up? and not laying flat.

Read other answers
RELEVANCY SCORE 50.4

I am using a Ideapad 100s (the 11" 200$ windows laptop)The laptop is over a month old and  I have had so many issues espesially on the build qualityAt first there was a whinning sound on the screen after the bightness gets bellow 95%  and the mouse pointer was moving by itself randomlySo I would send it back to Lenovo after the hollydays were oven (because I needed a computer to study as I was away from home).On this month I got sooo many issues:-The "U" key broke off as I was typing(The U and P keys height is lower than the rest of the key's)-The spacebar key is only registered if I tap it with some force on the center -The left  click on the touchpad was not placed at the same height (I didint notice at first) so it's not as taptile as the right click -Screen sometimes will remain black on boot untill I forceshutdown-And the blue paint on the back gets off!!(I've notice this after the edges turned from blue to white,So I started rubing a piece of paper on the back of the screen.Anddd Guess What the paint transefed to the paper).So will warranty cover any of theese problems?I Also heard that the service center on Greece has bad reputation and that makes me a litle worried ... :/

Read other answers
RELEVANCY SCORE 50

Hey all, this is my first time posting on the forums, so don't mind any bad etiquette. About 3 weeks ago I built myself a new computer for the first time. The installation went smoothly and everything worked perfectly fine. For the first two weeks, no errors in sight. I was playing games such as Bioshock Infinite (bloody great game btw) and Metro 2033 without issue. Then, a few days ago, my computer BSoD while playing through Bioshock. It went by rather quick so I couldn't read the error screen, but after a prompt reboot, everything was back to normal. After researching the error code (F4), I made the assumption it was my graphic driver. I reinstalled it and went back on my way. Since then, I've had three more BSoDs, each with codes differing from F4 and 7A. During these three times, I wasn't gaming or doing anything extensive, so I don't believe it's my graphics card. I found this site and hoped that someone out there could properly help me. I attached below my diagnostic zip.

My build:
Gigabyte Z87X-D3H
EVGA Superclocked 760 w/ACX Cooling
Intel Core i5 4670l
Corsair Vengeance Pro Red (8GB, 2 modules)
Cooler Master Hyper 212 EVO
WD Cavier Blue (1TB)
Corsair 200R Mid Tower Case

My temperatures have stayed insanely low (CPU only hitting 45 Celsius on load, GPU reaching 55 Celsius). Any help will be greatly appreciated. I apologize again for any improper etiquette, I'm here out of panic!

A:Brand new build, BSoD with bccodes F4 and 7A

Upload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here

Test your Hard Drive by running:Hard Drive Diagnostic ProcedureUse the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & ErrorsTest and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+ Pay close attention to part 3 of the tutorial "If you have errors"



   Tip
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.



A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try

Test your Hardware for Stability and Heat Problems with Prime95: Stress Test With Prime95 How to Stress Test a Video Card with Furmark:Video Card - Stress Test with FurmarkTest your CPU Stability with IntelBurnTest:CPU - Stress Test Using IntelBurnTest

Read other 9 answers
RELEVANCY SCORE 50

Hello, like the subject line says I just built a new machine a couple weeks ago. Right away I started getting blue screens, almost all of them happened within the first 1-2 minutes after logging into windows, a couple times immediately after logging in. It happened before I even launched any programs. If I didn't get a blue screen within the first 5-10 minutes I usually could run the machine all day without getting one. I don't have any .dmp files from these blue screens because I didn't know until a few days ago about the minidump folder and how to enable dump files, never had to deal with BSOD's until this. But I did write down some of the STOP error codes. Don't know if these are helpful by themselves but these are some of the ones I wrote down:

STOP: 0x000000D1
STOP: 0x00000024
STOP: 0x0000001E - the one I saw the most times
STOP: 0x00000050
STOP: 0x0000000A
STOP: 0x0000003B
STOP: 0x00000034

So I decided to format and reinstall Windows yesterday. Enabled dump files. I haven't installed any programs yet, I haven't even installed any drivers, no windows updates, nothing. All I have hooked up is the SSD, RAM, video card and dvd drive. I haven't actually been using the computer. I just turn it on and wait for it to get a blue screen so I have something to upload here. It seems to be following the same pattern as before I reinstalled Windows - the crashes happen within the first 10-15 minutes after booting. If someone can tell me what the problem is I would be VER... Read more

A:BSOD's brand new build, nothing installed yet

Looks like hardware - try the free hardware diagnostics here: Hardware Diagnostics
For more a more detailed analysis, please post the info from this link: http://www.sevenforums.com/crashes-d...tructions.html

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





Quote:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.-
Replace the SSD with a platter based hard drive ... Read more

Read other 1 answers
RELEVANCY SCORE 50

Hello all,
I saw the YouTube video saying to come here for help with BSOD concerns. I've attached what I understand to be dump files. Sure hope someone out there can help identify if I have hardware or driver issues. Any guidance is greatly appreciated, as I'm getting ready to pull my hair out over this.

A:BSOD over and over with brand new system build...

  
Quote: Originally Posted by Voice4u


Hello all,
I saw the YouTube video saying to come here for help with BSOD concerns. I've attached what I understand to be dump files. Sure hope someone out there can help identify if I have hardware or driver issues. Any guidance is greatly appreciated, as I'm getting ready to pull my hair out over this.


Hello there!

Please download this and run it and post us the results.

Read other 3 answers
RELEVANCY SCORE 50

Hello All

I have build a new gaming rig and installed Windows 10 pro but I have been getting bsod's and cannot figure out what is going on. I had it overclocked but since removed the overclock to trouble shoot the bsod. I have also run memtestx86 for 9 passes and no errors there. So I am reaching out for some help in solving the bsod the particular bsod that is coming up is System_Service_Exception. If anyone can help out that would be great!

Thanks

DWisenbaugh

A:Brand new Build getting BSOD System_Service_Exception

Uninstall Webroot while troubleshooting and use Windows Defender as alternative.

Check Evga for driver updates for the Marvell sata controller driver

Uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.


Code:
6: kd> lmvm WRkrn
start end module name
fffff800`b3760000 fffff800`b377f000 WRkrn T (no symbols)
Loaded symbol image file: WRkrn.sys
Image path: \SystemRoot\System32\drivers\WRkrn.sys
Image name: WRkrn.sys
Timestamp: Wed Jul 22 17:20:08 2015 (55AFB4A8)
CheckSum: 0002B71A
ImageSize: 0001F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

0: kd> lmvm mvs91xx
start end module name
fffff801`bbef0000 fffff801`bbf82000 mvs91xx T (no symbols)
Loaded symbol image file: mvs91xx.sys
Image path: \SystemRoot\System32\drivers\mvs91xx.sys
Image name: mvs91xx.sys
Timestamp: Tue Oct 09 10:50:58 2012 (5073E572)
CheckSum: 00050AB0
ImageSize: 00092000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

0: kd> lmvm nvlddmkm
start end module name
fffff801`beaa0000 fffff801`bf6c5000 nvlddmkm (deferred)
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.... Read more

Read other 0 answers
RELEVANCY SCORE 50

Hello. Just put together new HTPC and it is randomly crashing.

OS: Windows 7 64-bit, OEM Retail
Processor: AMD A8-3850
Graphics: Onboard
MOBO: ASRock A75M-ITX
Memory: Mushkin Silverline 8GB (2x4)
HD: Western Digital Caviar Black 1 TB (WD1002FAEX)
Blu-Ray/DVD: Lite-On internal (IHES112-04)

--------------------
It has crashed several times in 2 days. Crashed when clicking the "start" logo. Crashed in internet explorer. Crashed in google chrome. Crashed in XBMC program. Crashed all by itself from desktop.

Right before the screen goes blank, before the BSOD pops up-- the graphics are all messed up. Horizontal lines of jibberish for 1 second, then the crash. Computer temps are at 20 C. Memory has been tested overnight (12 hours) with Memtest and 0 failures.

I don't know what I'm looking for here. Any help?

I attached the .zip from the SF Diagnostic Tool.

A:Random BSODs in brand new build

Code:
BugCheck 109, {a3a039d898996529, b3b7465eeb16347f, fffff80002071af0, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Code:
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed.Driver Verifier - Enable and Disable
More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or t... Read more

Read other 1 answers
RELEVANCY SCORE 50

CPU: Core i7 4770K Haswell (Socket H3 (LGA1150)
Motherboard: ASUS Z87-K
Ram: PC3-10600 (667Mhz) 8GB x 2 Sticks
GPU: Intel HD Graphics 4600
HDD: Seagate 500GB Solid State Hybrid Drive (SSHD) + 1TB Standard HDD
PSU Corsair Builder Series CXM 500W Modular 80 PLUS Bronze Certified ATX/EPS PSU
OS: Windows 7 Professional 64-Bit SP1
Bios Version 0309 (04/07/2013)

Crash Details:
System randomly reboots, no warning, no specific applications running at the time, can happen 5 minutes after boot, or it can happen 6 hours after boot.

Important Information:
The customer is a professional DJ that does events around the country, and uses software called "Cubase" and "Reason" with lots of plugins (100+) that need to be installed and tested each time a re-install is done.

History:
This is a brand new system build, Initially I installed Windows 8 Pro 64-Bit which was working flawlessly for two weeks, after installing all needed software etc.
After the customer tested it he realised that his ?500 MIDI keyboard used to make songs didnt work because there was no driver for windows 8, and also his camera's that they used to stream video directly online for the radio station they work for, doesn't have window 8 drivers. I explained that window 7 64-bit drivers may work but ultimately he had decided that he doesnt like/want windows 8.

So I re-install windows 7 64-Bit, all working fine, install umtine plug-ins and software AGAIN! and test for a few days, no p... Read more

A:Brand New i7 Build Random Rebooting

have you checked to see wether your psu which is low quality can handle the haswell chip? not all power supplies are capable of running it at this time.

Edit: never use speedfan for temps use the BIOS or CPUID hardware monitor or HWINFO

Read other 19 answers
RELEVANCY SCORE 50

Man this is frustrating. I hope you guys can help.

So all my parts from Newegg came in a couple of days ago, I put my build together, installed Windows 7 ultimate, and I'm constantly getting BSODS.

My computer is crashing randomly from my desktop, but CONSISTENTLY crashing at startup, especially at the "loading windows' screen. It takes 2-3 crashes at reboot to get to desktop.

I've run memtest86, chkdsk, and last night for 12 hours straight I ran a Geek Squad hardware hot run disk - no errors, everything passed with flying colors.

I've updated all my drivers, and the only thing on the computer at the moment is Windows, and anything that comes on driver disks. I've attached my dmp files and the requested reports.

I wish it was just some faulty ram and I could send it back to newegg, but of course it's not that easy.

Can someone with more knowledge than I, look through my files and let me know what I need to do? Thanks so much.

edit:

and here are a couple of the windows messages that await me on a crash, might help?





Quote:
Locale ID: 1033
Additional information about the problem:
BCCode: f7
BCP1: 000002000747F008
BCP2: 0000F8800157102C
BCP3: FFFF077FFEA8EFD3
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\021811-25708-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-34335-0.sysdata.xml
Read our privacy statement online:
http://go.... Read more

A:Brand new build - constant BSODs - HELP!

I really hate to be that guy, but bump (it's already on the 2nd page).

Read other 4 answers