Over 1 million tech questions and answers.

Error 1067 - for various processes - Audio not working

Q: Error 1067 - for various processes - Audio not working

hi. I am not sure what happened to my computer. I was surfing the net, then tried to watch a movie and all of a sudden there was no sound. I tried to listed to a song in iTunes and had an error that there is a problem with my computer's audio/video settings configuration and the playback may not work properly.

when I go to settings/admin tools/services and try to start windows audio - I get the error "Could not start the windows audio service on local computer. Error 1067: The process terminated unexpectedly". Plug and play is started and seems to work. I get the same error for a few other services, eg, restore backup.
I tried to do a restore backup, but I get that restore backup is not able to protect my computer and I must restart.

also, the start/task bar changed from the XP to the windows classic mode with a larger font.

I have AVG as my anti virus and it was clean (only a few cookies that it removed). Malwarebytes; anti malware does not open for some reason.

chkdsk.exe (in read only mode) came back clean. the only thing it said "Warning! F parameter not specified" at the very top.

also, I used an aircard to connect to the internet and now the program would not connect to the internet. I am using another computer to post this as I am not able to access the internet from the infected computer I cannot copy and paste things.

also, my computer is much slower all of sudden, responds slower.

any suggestions as to what the problem may be and how to fix it would be greatly appreciated!

Thank you in advance.

RELEVANCY SCORE 200
Preferred Solution: Error 1067 - for various processes - Audio not working

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error 1067 - for various processes - Audio not working

Closing duplicate, please reply here:

http://forums.techguy.org/virus-oth...70-please-help-various-computer-problems.html

eddie

Read other 1 answers
RELEVANCY SCORE 73.6

Hello! This is my first time asking for help; thank you for your time.

I have an Asus N550JV laptop with windows 8. It has been working great the last year, but after a recent windows update, my audio completely stopped working. After running the troubleshooter, it stated the following:

One or more audio service isn't running
Not fixed


Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly. Atleast one of these services isn't running.

After doing some research, I was able to view the local services running on my laptop. I found that Windows Audio Endpoint Builder is running, but Windows Audio is not. When trying to start Windows Audio, I got the following messgae:

Windows could not start the Windows Audio service on Local Computer.
Error 1067: The process terminated unexpectedly.

How do I get my audio back? I have Online Lectures I need to watch for school, so any help would be great! Thank you for your time
jvelichk

A:Windows Audio Service will not start, error 1067

Do you have a System Restore point that is BEFORE the last update?

Sadly, you may have to do a reinstall or if you have a backup a restore from the backup. My Windows 8.1 was corrupted by the last update (my suspicion). Fortunately I had a recent full backup and restored from the backup.

Read other 1 answers
RELEVANCY SCORE 73.6

I have recently installed Windows 7 on my new computer. My sound drivers are all up to date, and the Device Manager knows they are there and working. However, the Volume Adjuster has the speaker with the red and white cross, and when the audio troubleshooter pops up, it does nothing to fix the problem, just acknowledges that there is one...

So, I looked up solutions, and was told to enable the Windows Audio service. I tried, and got a 1067 Error (Unexpectedly terminated). I have started, and successfully run, all of the dependencies, yet Windows Audio still won't run. I ran the 'sfc /scannow' as I was told that might work, but no luck. I also uninstalled and reinstalled my audio driver numerous amounts of times, still no luck. I'm running out of options, so I came here.

Please, any help would be appreciated.

A:Windows Audio service won't Start Error 1067

Did you clean install Windows 7 or upgrade?

Read other 6 answers
RELEVANCY SCORE 69.2

Hi,
Since April I I am facing the problem where my audio service show a red X.  I did all the what the forum states and I just tried to ensure all the dependencies services are started.  However, the audio service does not start but shows the error
1067.I have even installed the driver for my sound card SB Live! 24.
I have run out of option but to ask for your help.  Can you please help me to resolve this issue.  My computer was running smoothly without any problem and suddenly i am facing this issue.
Help, Help!!!!

4Lobos

Read other answers
RELEVANCY SCORE 56.8

I went through the steps that you had on one of your youtube videos. I do have a lexmark, however, I don't see the LexBce Server in my list for my system and I am really having a hard time. Please help me with my spool printer error code. Thank you
 

Read other answers
RELEVANCY SCORE 56.8

Okay guys...I'm about ready to shoot something.
I've been at this for 3 full days. The problem is basically the Print Spooler keeps shutting off. I've done all the basics (i.e. set startup to automatic, subsequent failures, etc...). In the event log, there are 5 error codes the persistently show up that are the cause, but I don't know how to go about fixing them.
They are:
Error Service Control Manager 7031
The Print Spooler service terminated unexpectedly. It has done this 14 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
Error Microsoft-Windows-PrintService 503
Routing print spooler command(s) The system failed to initialize the local print provider: Error 0x7e. This can occur because of system instability or a lack of system resources.
Error Microsoft-Windows-PrintService 511
Initializing a print provider The print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.
Error Microsoft-Windows-PrintService 808
Initializing The print spooler failed to load a plug-in module localspl.dll, error code 0x7e. See the event user data for context information.
Error Microsoft-Windows-PrintService 509
Routing print spooler command(s) The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x80040154. This can occur because of system instability or a lack of system resources.
These show up repeatedly in the same order ever... Read more

A:Print Spooler Error 1067

What happens when you run this Microsoft.com Fixit? http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
 
Have you tried uninstalling the printer software for the Lenovo?  You may have to go into Regedit to the following key, to delete the printer from the Registry, if it does not remove when you uninstall the software HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers
 
Sometimes updates for Windows cause problems, other times it is the mfg of the product, that screws things up.  There is no really easy fix, when it comes to fixing printer or scanner issues.

Read other 7 answers
RELEVANCY SCORE 56.8

I am running windows 7 and wireless fails to start. wlan autoconfig service is giving error 1067 -The process terminated unexpectedly. Wireless was working before on this laptop. any ideas to fix this? Thanks, tsn

A:wlan autoconfig Error 1067

No resetting catalog and logs did not work. I had to reinstall the OS to get it working. Though any further assistance on this issue will be helpful just in case this this pops up again.

Read other 4 answers
RELEVANCY SCORE 56.8

Hi, can could u pleae help with the following! os xp sp3, did not realise i lost my printer so for how long not sure, have tried re-installing printer but when it comes to installing the driver the spooler turns its self off, i can see this happening from control panel/admin tools/services/print spooler. its set to auto even when running when clicked on start/printerfaxes it turns off, manuall restart runs double click add printer it turns off straight away. thanks for your time
 

A:Print spooler error 1067

Was trying to find a solution, and would have followed only 1 course of action and thanks for reply, i have checked and done.
 

Read other 1 answers
RELEVANCY SCORE 56

I have a small windows 7 laptop used only by one person for their email. In the last few days, updates stopped working. Currently, the Windows update service is stopped and will not start. It tries, but returns an error 1067.

I have tried a number of KB fixes. The Eventvwr shows error x080080005 regarding the Update Server "Server execution failed." Nothing much else.

SFC /SCANNOW reports no problems at all.

http://support.microsoft.com/kb/971058 outlines steps to potentially solve the problem, but has not solved it.

Antivirus from MSE, MalwareBytes and Kaspersky have found no problems, although MSE is now a few days out of date, as I cannot update it due to this problem.

I looked for any recently installed programs that might be badly behaving, but nothing has been installed within the last 30 days. I did choose to uninstall some much older programs of questionable value (odd brand PDF print tools).

The computer had a problem where it thought software was "currently being installed", when in fact none was, but the use of http://support.microsoft.com/kb/290301 seems to allow forcing me to deletions and actually fixed the Programs and Features component to allow uninstalling software just fine. However, the Windows Update from the control panel or from the Action Center still does not work because the update service will not start (as stated at the top of this post).

I tried http://support.microsoft.com/kb/949104 but in safemode, it does not ... Read more

A:Cannot run windows update service error 1067

Try Windows Repair (All In One)
Check "repair windows updates" and "repair important windows services". Other checks are up to you.
Post results.

Base Filtering Engine Service can be started successfully?
Background Intelligent Transfer Service can be started successfully?

Read other 9 answers
RELEVANCY SCORE 56

Okay guys...I'm about ready to shoot something.

I've been at this for 3 full days. The problem is basically the Print Spooler keeps shutting off. I've done all the basics (i.e. set startup to automatic, subsequent failures, etc...). In the event log, there are 5 error codes the persistently show up that are the cause, but I don't know how to go about fixing them.

They are:

Error Service Control Manager 7031

The Print Spooler service terminated unexpectedly. It has done this 14 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

Error Microsoft-Windows-PrintService 503
Routing print spooler command(s) The system failed to initialize the local print provider: Error 0x7e. This can occur because of system instability or a lack of system resources.

Error Microsoft-Windows-PrintService 511

Initializing a print provider The print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.

Error Microsoft-Windows-PrintService 808

Initializing The print spooler failed to load a plug-in module localspl.dll, error code 0x7e. See the event user data for context information.
Error Microsoft-Windows-PrintService 509

Routing print spooler command(s) The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x80040154. This can occur because of system instability or a lack of system resources.
These show up r... Read more

Read other answers
RELEVANCY SCORE 56

Hi.
I am running Windows XP Home SP3 on a Lenovo SL500.
The laptop suddenly stopped connecting to the internet (stuck on acquiring network address). Then suddenly sound stopped working (even though I have the correct drivers installed).
I have tried the following:
1) going to the previous working version - no luck
2) I went to services.msc and found the DHCP client won't start. When I try to force start it, it gives me error 1067. ipconfig gives an error saying "an internal error has occurred. the system cannot find the file specified". I have no idea what file this is. Also, in services.msc when I restart windows audio to get sound back, it starts and then stops again. I also noticed other services like Wireless Zero that should be running are stopped. When I turn them on, they stay on for a short while before stopping automatically.
3) I ran winsockxpfix.exe, sfc.exe /scannow - no luck
4) I did a registry clean - no luck
5) I did a repair install of Windows again and still no luck.
Does anyone have any clue what's wrong and how I can fix this? I don't want to have to format and do a fresh install if possible.
Thank You.

A:DHCP client will not start - error 1067

Try running these at a command prompt restarting after each to see if DHCP will start.  Make sure you have your XP CD handy for the second.
netsh winsock reset

sfc /scannow

Read other 6 answers
RELEVANCY SCORE 56

Hi 
Installing ATA on a 2012 R2 but the Center service wont start. Getting the following error.
Please can someone assist?
Hardware is adequate 4Cores 48Gig Ram
[1018:083C][2017-03-15T02:28:15]i052: Condition 'NetFrameworkRegistryValue >= 394254' evaluates to false.
[1018:083C][2017-03-15T02:28:15]i052: Condition 'NetFrameworkRegistryValue >= 394254' evaluates to false.
[1018:083C][2017-03-15T02:28:15]i101: Detected package: NetFrameworkPackageServer, state: Absent, cached: None
[1018:083C][2017-03-15T02:28:15]i101: Detected package: NetFrameworkPackageServerCore, state: Absent, cached: None
[1018:083C][2017-03-15T02:28:15]i101: Detected package: BundleActionsPackage, state: Absent, cached: None
[1018:083C][2017-03-15T02:28:15]i101: Detected package: MongoDBPackage, state: Absent, cached: None
[1018:083C][2017-03-15T02:28:15]i101: Detected package: MsiPackage, state: Absent, cached: None 

Read other answers
RELEVANCY SCORE 54.8

WLAN AutoConfig service gives error 1067 when trying to start it.


What I've tried:

Reset winsock settings
Ran SFC /scannow
Did system restore
Uninstalled and reinstalled drivers


I tried all of these in normal mode AND in safe mode. None of it worked.

Then i thought the service dll (C:\Windows\system32\wlansvc.dll) itself might have been damaged/outdated, so I decided to delete it and put a new one from donor pc. NOPE.
It wouldn't give me access to the file. No matter what i tried, safe mode, unlocker tools, auto rename it on startup, doing everything in administrator or even messing with permissions under file properties. It just wouldn't give me access to the file.

Wi-Fi was working smoothly few days ago and i literally have no idea why it stopped working.

Specs:

Windows 7 Professional 32-bit
Sony VAIO VGN-SZ340P
3945ABG Wi-Fi card
Any idea how to fix it? Thanks in advance

A:WLAN AutoConfig service doesn't start, error 1067

Extensible Authentication Protocol (service) is running or can be started?
CNG Key Isolation Service is running or can be started?

Read other 4 answers
RELEVANCY SCORE 54.8

See below Mongo db error log.  Could this be related?

2018-12-05 22:59:22.5294 4872 1234 Error [CommandWireProtocol`1] MongoDB.Driver.MongoCommandException: Command collStats failed: Collection [ATA.ServiceInstalledEvent_20180608051637] not found..
   at MongoDB.Driver.Core.WireProtocol.CommandWireProtocol`1.ProcessReply(ConnectionId connectionId, ReplyMessage`1 reply)
   at async MongoDB.Driver.Core.WireProtocol.CommandWireProtocol`1.ExecuteAsync[](?)
   at async MongoDB.Driver.Core.Servers.Server.ServerChannel.ExecuteProtocolAsync[](?)
   at async MongoDB.Driver.Core.Operations.CommandOperationBase`1.ExecuteProtocolAsync[](?)
   at async MongoDB.Driver.Core.Operations.ReadCommandOperation`1.ExecuteAsync[](?)
   at async MongoDB.Driver.OperationExecutor.ExecuteReadOperationAsync[](?)
   at async MongoDB.Driver.MongoDatabaseImpl.ExecuteReadOperationAsync[](?)
   at async Microsoft.Tri.Center.Database.MongoDatabaseExtension.RunAsync(?)
   at async Microsoft.Tri.Center.Database.CappedCollection`1.UpdateCurrentCollectionEntityCountAsync[](?)
   at async Microsoft.Tri.Infrastructure.Extensions.TaskExtension.<>c__DisplayClass33_0.<RunPeriodic>b__0(?)

Read other answers
RELEVANCY SCORE 53.6

Hi, I have an issue with ATA 1.7.

I have deployed ATA in my lab environment (VMware ESXi) but the ATA GATEWAY service keeps on Starting. When I manually tried to restart, it showed an error:

Windows could not start the Microsoft Advanced Threat Analytics Gateway service on Local Computer.Error 1067: The Process terminated unexpectedly.

Then, I tried to deployed my lab in my laptop (2 VMs / VMWARE Workstation) and ATA works fine. These same VMs don't work on ESX, the network configuration is good but error 1067 again

Is there some special prerequisites/configuration on ESX ? 

Configuration:

Center: Windows 2012 R2 / 4 core / 8 go ram

DC + Lightweight Gateway: Windows 2012 R2 / 4 core / 8 go ram

Read other answers
RELEVANCY SCORE 53.6

I purchased a Netgear Push2TV PTV3000, and updated the firmware, downloaded the latest Intel WiDi, and tried to connect. The search for WiDi adapters found the PTV3000, so I double-clicked to install it. Add a Device ran, but could not find the PTV3000.
Searching the Web I found I needed to insure WiDiApp and Wireless PAN DHCP Server were allowed through the firewall. I found that the WiDiApp was listed in, and allowed through the firewall. I could not find any mention of Wireless PAN DHCP Server in the firewall.
I found the entry in Services, and it was listed as Manual. I set it to Automatic and tried to Start the service. I received an Error 1067: The process terminated unexpectedly.  I am running Windows 8 on a Sony SVS15118FXB.
As a possibly associated issue, since I believe Bluetooth also uses the Wireless PAN DHCP Server, I cannot get Bluetooth to function on the same computer. Attempts to connect Sony Bluetooth speakers also fail.  Maybe the same issue?
Any help would be most appreciated...

A:WiDi can't connect, found Wireless PAN DHCP Server can't start with error 1067

Please post in Windows 8 forums.Arnav Sharma | Facebook |
Twitter Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Read other 3 answers
RELEVANCY SCORE 53.2

Hello people who read this,

Note: I am Dutch and my English is not that good.

I got an error from Windows right after a BSOD that Windows unexpectedly closed. Happened 100+ times on my computer, nothing new, seems unsolvable and I could not find a solution for it.
Windows sent me a message that it found a solution for the BSOD. "There is probably a problem with your RAM.". I runned a scan and it hasn't found anything.
When I opened the solution for the millionth time or something, I discovered a button and clicked it. This was the first time I saw the word "Superfetch".
I thought it was just nothing and went on with whatever I did on my computer.

Lately I was thinking that Superfetch could be the thing that keeps 'BSODing' my computer.
I did some research on Google and have found out that the service is called SysMain and a related folder Prefetch. I also found out how to start Superfetch.

When I started it I got this error where it's all about in this thread (it's in Dutch):

Translated:

Can not start the Superfetch-service on Local Computer.

Error 1067: The service unexpectedly ended.

I Googled it many times in different ways, but I was not able to find anything about this problem.

So my question is: What does 'Error 1067' mean and how can I solve it?
Do not worry about the BSOD thing, I got an other thread for that .

System specs (as far as I know):
OS: Windows 7 Home Premiun 64x
OEM: yes
Computer Model: Compaq Presa... Read more

A:Superfetch error, "Error 1067: The thread unexpectedly ended."

Another reason for me to get help is because it might solve some BSODs (I think it'll solve MEMORY_MANAGEMENT)

Read other 2 answers
RELEVANCY SCORE 47.6

conexant smart audio multistream not working.audio by harman app is also not working. usually when it works a visualisation effect is shown. now the effects are not showing and audio enhancement from the app is also not coming

Read other answers
RELEVANCY SCORE 47.2

About a month and a half ago, I was fiddling with my laptop (an IBM ThinkPad T23 with Windows 2000 Professional) and I deleted the SuperSavage and Utilities, not realizing it was vital for my resolution. I tried reformatting and all that jazz, but no luck. I just got the driver onto a CD-R from my other computer and installed it into my laptop. My laptop resolution is perfect and back to normal. However, the laptop's audio isn't working. I can hear the error sound when I play Freecell (haha) but I can't hear an audio CD. I tried turning the volume up and that works with the error sounds and stuff, but not audio. Also, the little thing that showed the volume increasing when it's turned up isn't showing, but it is working. Any ideas? Thanks in advance for any help.
 

A:audio isn't working but error sounds are

Sounds like you are missing the audio drivers. Go to the makers website and download them. Pretty sure that'll fix you up.

You can get them here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-39415
 

Read other 1 answers
RELEVANCY SCORE 46.8

Hi.
I bought the Editors Keys Studio Series SL300 Microphone. The Mic is supposed to have all of the required drivers already installed inside of it so that when you plug it into the computer it will be ready to go (it's a USB Mic btw). The problem is when I plug the mic in, it says that the USB Audio Device is not working properly. When I look under the properties for that device it says: Device Status-This device cannot start. (Code 10). I've tried troubleshooting the device and everything but nothing is working. All of the other devices installed in the mic are working properly, just not this one. Since it won't work properly the mic does not even get detected by my laptop, it doesn't show up under detected recording devices.

In case it helps, my computer is an Acer Aspire V3-571

I think I tried everything.
-I did troubleshooting.
-I reset my computer back to factory defaults, so I don't have previously installed drivers conflicting with this one.
-I've reset my computer multiple times and reinstalled the mic multiple times.

If anyone has an ideas it would be great, Thanks!

A:Microphone not working. Audio Device Error.

Hi mattster15,

'Error Code 10' is generated when the 'external device' has no drivers installed on your computer; or the drivers are configured incorrectly. You may want to refer to the following link: Description of Code 10-related errors that Device Manager generates in Windows-based computers

I failed to find related drivers on the manufacturer's website; says that the device is designed to work with Mac/PC: The SL300 Condenser USB Microphone - Both Mac & PC Compatible - Used by thousands of professional recording artists | Editors Keys

You may try the following steps to see if they work for you:
Open 'Device Manager' > Expand 'USB Controllers' > Right click and uninstall all 'USB Root Hubs' listed in the list > Go to 'Action' in 'File Menu' (top-left) > Select 'Scan for hardware changes' > Check if the 'Microphone' installs itself now

If it still does not work and shows a 'yellow mark' besides it, you may want to contact the 'part manufacturer' to check the 'device compatibility' with the 'operating system' installed in your unit.

Good Luck!

Read other 9 answers
RELEVANCY SCORE 46.8

About a month and a half ago, I was fiddling with my laptop (an IBM ThinkPad T23 with Windows 2000 Professional) and I deleted the SuperSavage and Utilities, not realizing it was vital for my resolution. I tried reformatting and all that jazz, but no luck. I just got the driver onto a CD-R from my other computer and installed it into my laptop. My laptop resolution is perfect and back to normal. However, the laptop's audio isn't working. I can hear the error sound when I play Freecell (haha) but I can't hear an audio CD. I tried turning the volume up and that works with the error sounds and stuff, but not audio. Also, the little thing that showed the volume increasing when it's turned up isn't showing, but it is working. Any ideas? Thanks in advance for any help.


And by the way....why is Chef a smiley? lol :chef:
 

A:Laptop audio isn't working, but error sounds are

Maybe the driver for the sound card is different from the one for the video?? Just a guess here, didn't do much research on ThinkPad.

cT
 

Read other 4 answers
RELEVANCY SCORE 46.4

hello,i just installing fresh windows,antivirus are up to date,drivers and other software installed properly,but when i starts windows after 5-10 minute the explorer.exe seems error,and the audio driver not working.

the event viewer only give 1 erorr message,here is some info:

======================================

Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 28/05/2009
Time: 12:20:01
User: N/A
Computer: EXZEDNET-19
Description:
Faulting application , version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 20 30 2e ure 0.
0018: 30 2e 30 2e 30 20 69 6e 0.0.0 in
0020: 20 75 6e 6b 6e 6f 77 6e unknown
0028: 20 30 2e 30 2e 30 2e 30 0.0.0.0
0030: 20 61 74 20 6f 66 66 73 at offs
0038: 65 74 20 30 30 30 30 30 et 00000
0040: 30 30 30 000

======================================

i am using windows xp,i try installing different service pack,2 and 3,but the problem is same. here is the screen shot of start up and driver:





hope you can help me and thanks for your time

A:unknown application error (audio driver not working)

Hello and Welcome to TSF,

Check device manager for any yellow ! marks.

make and model of pc.

Read other 3 answers
RELEVANCY SCORE 46.4

Hello,

I don't know what's wrong with this.I have no sound for anything. and even when I try to stream videos in the internet, the video automatically pauses for about every 12 seconds.

I don't know what to do but I think you guys can help me.
I also have a Realtek AC'97 audio for VIA(R) audio controller. I'm running Windows XP Service Pack 3. My motherboard is VIA VT8237R plus.

I'm having the same problem:
Device cannot start( code 10)

I also tried to install that vinyl_v700b
but every time the installation starts, my conputer tends to restart. That's why I can't install that one.
what's wrong? Can you guys please tell me what to do?
thnx. I cant really watch videos nor play music files.

Thanks again.
 

A:Realtek AC'97 audio controller not working -- error (code 10)

Apart from the audio driver, it is critical to have the right chipset driver installed. The VIA southbridge needs to work properly to interface with the vinyl audio processor.
So try installing the chipset driver first, and then the audio driver. And of course make sure all MS updates are installed, including the MS UAA driver.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi peeps.

First time posting, so if im not doing it right i apologise.

I recently formated my pc, and re-installed windows XP pro.. installed all my drivers ect & everything was working perfect even my sound.. the next day when i switched the pc my audio device has a code 10 error?

How does that work? i dont have a virus as i did scans, i tried uninstalling and re-installing all different audio drivers even older versions, just doesnt seem to work...
Im getting sleepless nights with this nonsense .. damn digital signatures

My pc specs:
AMD 3000+
motherboard 7njl3/4
geforce 6200a
1 gig ram
120 gig hardrive.

PLEASE HELP ME.. it is so damn annoying..

thanks in advance.
 

A:Realtek ac'97 audio drive not working, error code 10

No sound?

Try the simple things first. Speakers on and working? Plug them into a MP3 player, test that they actually amplify. Speaker plug in the correct socket in the PC? ( I mean not the Mic socket?) Have you looked in 'Device Manager' for a yellow warning by the entry for your sound option? Assume you know all the above, it's most likely still to be the wrong drivers. Go into 'Device Manager' and uninstall any sound drivers. Then go to www.drivereasy.com and download their free program, scan your PC and you will get the right driver I would think. You might also find a few other drivers out of date too. And NO it doesn't cost you to use that program. Hope this helps.
 

Read other 35 answers
RELEVANCY SCORE 45.6

I do not know what happened. It just suddenly stopped working one day and now the sound icon in the toolbar has a red "X" on it. When I click on it it runs a trouble shoot which eventually comes up with "ATI High Definition Audio Device has a driver problem." I have tried to go to Realtek and download the "ATI HDMI Audio Device" and run that but it hasn't worked. I also tried to do the driver only download from the website for Windows 7 but that didn't seem to work either. I eventually received a message that stated "Install Realtek HD Audio Diver Failure !! [Error Code : 0x000000FF]." I looked in Windows Update to see if maybe there was a new update for a driver to fix it but it didn't have anything.
 
I come to you all because it's what I did last time I had an issue and you all were very good to me. You all are a lot more computer savy than I am so you all are able to think of things to solve issues that I never even think about. I really need you alls help. Also, I have heard that this type of information may be important in trying to solve this to by motherboard is a Gigabyte GA-770TA-UD3.
 
Again, please, any help will be much appreciated. I have tried a lot of things but nothing has worked.
 
Thanks in advance

A:Audio suddenly stopped working, "error code 0x000000ff"?

my guess would be sound card went bad. replace that bad boy!

Read other 97 answers
RELEVANCY SCORE 45.6

Hi
hi, my comp is having some audio problems and I really need help. -windows 7 ultimate 64 bit-

I haven't been able to start up windows properly without a blue screen followed by restart. I can only start in safe mode.

It says one or more audio services aren't working.
it says i have no audio playback device installed. One or more audio service isn't running.Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly. Atleast one of these services isn't running.


looking at a previous thread, when I checked services. My windows audio and audio end point are at automatic, however when I check properties>discrepancies, there is not information.

What do I do??

A:audio not working leading to blue error screen and restart. help!

Hey muddly, welcome. So, an Acer Aspire huh?, I always have trouble with these, I don't know why . Acer doesn't like me at all. Did you installed the OS and drivers yourself?, or it came like that from the OEM?

Read other 5 answers
RELEVANCY SCORE 45.2

In the startup, I see two "HD Audio background process"
I noticed that someone on the lenovo forum said that that can be normal. But, they recommended updating the drivers. Should I be trying to update the audio driver?

Read other answers
RELEVANCY SCORE 44.4

Hi.

Is this possible?

I'm running windows XP Pro 64 I have good specs on this machine, an i7 quad, 12 gig of ram and an edirol UA 101 (usb) sound card. But whenever I open and close an app (well most apps) with any other audio devices running (Windows media player or my Daw FL studio for example) I get severe buffer underruns and my whole system stutters very badly until the apps have finnished their startup, during their startup process any audio playing becomes extremly distorted.

I'd like to find a permanent solution to this problem, a few things that have worked so far were, 1 using a pci sound card an e-mu 0404 (That helped) but I no longer have this card, the second solution was to raise my buffer size way up to arround 30 ms or over, obviously this is not a desirable workaround as this card can run quite happily at latancies between 3-6 ms which I need it to do during normal audio processing tasks such as running my Daw.

So, it occured to me that isolating all the audio processes to a single CPU core might stop the distortion/interuption of the audio signal that I'm expieriencing, but from here on I'm a little stumped, I can't find any trace of any processes that are linked to my sound card, or any audio devices at all infact, none of them show up in my task manager.

Isolating the apps themselves didn't work, isolating the sound card seems impossible, am I perhaps barking up the wrong tree here?

Any advice would be most welcome... Read more

Read other answers
RELEVANCY SCORE 44.4

HI there,

I'm having terrible problems with my machine. I upgraded the memory thinking it was that causing the problems.

With no real change I'm starting to wonder if the machine is infected and I just can't find it.

Even typing this I'm watching the charaters appear one by one.

The main problems are as per the title.

Can you see anything that I can't?

Thanks
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.18702
Run by hug le bass at 18:51:09 on 2012-01-18
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.2047.1453 [GMT 0:00]
.
AV: AVG Internet Security 2012 *Disabled/Updated* {17DDD097-36FF-435F-9E1B-52D74245D6BF}
FW: AVG Firewall *Disabled*
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k WudfServiceGroup
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\AVG\AVG2012\avgwdsvc.exe
C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
C:\Program Files\XGI\XWatDog.exe
C:\WINDOWS\system32\Trirot.exe
C:\WINDOWS\BCMSMMSG.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\Dell\AccessDirect\dadapp.exe
C:\Program Files\Dell\QuickSet\quickset.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Maxtor\OneTouch Status\maxmenumgr.exe
C:\Pr... Read more

A:bad audio/video playback high cpu processes

Hello huglebass,

How long ago did this issue start?

Read other 5 answers
RELEVANCY SCORE 44.4

I went away for a couple weeks and let my bro use my comp. Well, I get back and theres all this junk on here. I tried cleaning most of it up, but I'm sure theres still something harmful on here. Can somebody review my log and tell me what's possibly wrong. Also, for some strange reason my audio doesn't work on certain things now such as web pages in both IE and Mozilla. Maybe I should get a firewall/security upgrade. Please, any help would be great. Here's my log file...
Logfile of HijackThis v1.99.1
Scan saved at 9:52:43 AM, on 7/9/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\RunDLL32.exe
C:\WINDOWS\system32\WDBtnMgr.exe
C:\Program Files\WDC\SetIcon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Java\jre1.5.0_11\bin\jusched.exe
C:\Program Files\Hp\HP Software Update\HPWuSchd2.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\Iaantmon.exe
C:\Program Files\Comm... Read more

A:Harmful running processes and audio problems, please help!

Help
 

Read other 1 answers
RELEVANCY SCORE 44

Hello,I am running Windows XP SP 3. I always use Chrome as my normal browser but over the last few weeks have noticed multiple iexplore.exe process running in task manager. The iexplore.exe processes are always running under the SYSTEM account. When my audio is on i can hear the IE "click" indicating a window is opened, yet no browser actually opens. I also hear audio clips of commercials, such as Slim Jim commercials and other random ads. I also receive Internet Explorer error windows asking me to either Continue or Cancel.I ran the recommended Anti-Malware software and that seem to just masque the problem. While the iexplore.exe processes are no longer visible in task manager, they are running as hidden processes, with all the same symptoms as mentioned above.If i try to actually open the IE Browser, the computer thinks for a bit, but never actually opens the window.The DDS Log contents are pasted below and i'm attaching the DDS Attach and GMER (Ark.txt) Logs. Thanks for any assistance you can provide in advance!DanDDS (Ver_10-03-17.01) - NTFSx86 Run by Dan at 17:51:40.54 on Tue 07/27/2010Internet Explorer: 8.0.6001.18241 BrowserJavaVersion: 1.6.0_14Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.3062.2279 [GMT -4:00]AV: avast! Antivirus *On-access scanning enabled* (Updated) {7591DB91-41F0-48A3-B128-1A293FD8233D}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:�... Read more

A:Multiple Iexplore.exe processes running, causing audio and pop-ups.

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 27 answers
RELEVANCY SCORE 44

Hi,

I am facing this problem with my Acer Laptop. since morning i have noticed that multiple iexplore.exe are running in the taskmanager with randon audio also being played in the background.

OS: WIN XP SP3
Antivirus: Avast Home
Anti Malware: Malwarebytes Anti Malware & Prevx.

Please help.. m totally stuck with this making me go crazy..!!x

Here is the Hijack Log:

-------------------
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 21:23:08, on 08/07/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Trusteer\Rapport\bin\RapportMgmtService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
D:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
D:\PROGRA~1\ALWILS~1\Avast5\avastUI.exe
C:\WINDOWS\system32\tcpsvcs.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Trusteer\Rapport\bin\RapportService.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\SNDVOL32.EXE
C:\Program Files\Prevx\prevx.exe
C:\Program Files\Prevx\prevx.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Program Files\Internet Explo... Read more

Read other answers
RELEVANCY SCORE 44

Hi all,

I've been hunting around, but, basically, I don't know exactly what to even search for. Here's my setup: I have my PC hooked up to a standard monitor and computer speakers. I also have a digital audio out running to my receiver and a VGA hooked up to my LCD TV. Whenever I want to throw on a video for the kids, I have to go into sound properties, set digital out as my default audio, hit "OK" then go over to "Screen Resolution" after right-clicking on the desktop, setting the "Multiple Displays" to "Extend these Displays" hit OK then OK.

It may not sound like a ton of work each time, but I do it really often and I'd really like to automate it to one or two clicks. I was looking at ways to do it w/ VB Express, but couldn't figure out how to control video/audio settings. Any suggestions?

Thanks!

A:Would like to automate some processes - change audio output/display

hey,

what you need is to download and install autohotkey and use the scripts below

Windows 7 Tip: How to change the default audio device with a hotkey

you can click on the source of the article to get more information

this will deal with the audio part

then use this script that i wrote to deal with switching the video

http://www.sevenforums.com/751791-post3.html

place the scripts in your startup folder if you want them to launch at startup.

i have a similar setup so hopefully this will solve your problem.

regards

Read other 3 answers
RELEVANCY SCORE 44

OS: Win Xp SP3

Symptoms:
multiple iexplore.exe processes running in the background
Random Internet Explorer pop up ads
My wave control is near mute every few seconds.
I hear random clicking sounds in the background (like link clicks)

Ive read a couple of similar posts, and each one had a different fix to it, so im not sure if i should try the fix or wait for a response ...
Thanks In advanced

A:wave audio goes mute, ad pop-ups, multiple iexplore.exe processes

hey, i have this problem too. did you get it fixed yet?

Read other 5 answers
RELEVANCY SCORE 43.6

I am in the process of building image with the anniversary update.
I upgraded my Windows 10 Build 10586 (TH2) to the latest Anniversary update (redstone).
I have found two issues that I can not get past at this time.
1) If the windows store apps update or if you run any appx commands to remove provisioned packages, I can not run sysprep via sysprep.exe.

I get a message that sysprep failed.. see below of the error.

2016-08-19 07:34:11, Info SYSPRP ========================================================
2016-08-19 07:34:11, Info SYSPRP === Beginning of a new sysprep run ===
2016-08-19 07:34:11, Info SYSPRP ========================================================
2016-08-19 07:34:11, Info [0x0f004d] SYSPRP The time is now 2016-08-19 07:34:11
2016-08-19 07:34:11, Info [0x0f004e] SYSPRP Initialized SysPrep log at C:\WINDOWS\system32\Sysprep\Panther
2016-08-19 07:34:11, Info [0x0f0054] SYSPRP ValidateUser:User has required privileges to sysprep machine
2016-08-19 07:34:11, Info [0x0f007e] SYSPRP FCreateTagFile:Tag file C:\WINDOWS\system32\Sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
2016-08-19 07:34:11, Info [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'RESPECIALIZE'
2016-08-19 07:34:11, Info [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'QUIET'
2016-08-19 07:34:11, Info SYSPRP... Read more

Read other answers
RELEVANCY SCORE 43.2

Hi,I have reinstalled my T420s with win 10 1067, it seems the machine can not display on my external monitor (using display port, or any connection).when I set extended or duplicate displays it seems to have 2 displays (the lenovo and my Dell U2414h) but i see nothing on my Dell. Of course i triple verified the input on my Dell is the relevant display port and i am using the same display with the same connection to my T460s ! ) I can see in the device manger only the intel Graphics 3000 and there is PCI serial port which is not recognized.I went over all the drivers in the support page and updated my device manger, including chipest and bios. Still nothing helped. Any help will be appreciated.Thanks 

Read other answers
RELEVANCY SCORE 43.2

Okay, i just wanted to double check that im a noob.

I have a Asus p5b, with core duo e6600 and patriot 1ghz ram. the ram is currently running at 800mhz or somthing, and everything is stock. timings are the 5.5.5.15 factory settings on the ram.

I think that means i should oc the cpu and ram to be

6x500 and ddr2 1000 but i dont know. i want the ram to runat the ghz, and i would like some oc on the cpu, as i've got a big typhoon 120mm sink on it, keepin it chilled.

thanks for the impunt~!~!~
 

A:OC E6600, Asus P5B, Patriot ddr2-1067

the core2's o/c great, but i doubt your memory will be able to keep up. increase the FSB clock in small increments, verifying that the system is fully functional after each increase. before long, you will get to a point where the system crashes upon boot or will not POST. you may need to reset the BIOS, so make sure you know how to do that and that you write down your settings. once this happens, revert to the last clock speed that worked. run memtest to ensure that the system is really functioning properly.

in addition to increasing the clocks speeds, voltages can be increased to allow for higher speeds. increasing voltages will cause a lot of extra heat to be produced, and a dramatic increase can damage/destroy parts. i wouldn't mess with the voltage until the system has stayed running for a few days with a maxed-out FSB. leaving the voltages alone is a good idea for novice overclockers.

overclocking can irreparably damage and/or destroy your hardware if done wrong, so it's important to be patient. remember that you are going to need to keep close tabs on your CPU and northbridge temps during the entire process. if you see temps that exceed the mobo's specs, back off. even if the system seems to be running fine, heat will, in time, kill it.

it would not hurt to consult some online literature on overclocking and to familiarize yourself with your mobo's manual and BIOS.
 

Read other 3 answers
RELEVANCY SCORE 43.2

After yesterday update of Widows 10( ver.1067) I've got the following situation:After PC reboot I can see Window label  (sign) .... downloading ..... and black screen..... I tried to launch boot USB drive with Windows recovery tool. It doesn't work for me - I can't go back to last Windows version.Recovery mode doesn't work. How to remove this update from PC? Could you advise, how to fix this issue? P.S. According to Internet and Google -  the problem was with SSD boot disk + video card.  How to enter Safe mode after reboot for Windows 10 to fix problem? 

A:Black screen after Windows 10 Update (ver 1067)

Hi Once unit is powered on hold down the Shift key & F8 that should take you to safe mode option.

Read other 4 answers
RELEVANCY SCORE 43.2

On a Windows XP box I am seeing the symptoms I have been reading about here and elsewhere. tdsskiller will not run, aswMBR will not run. GMER does not run properly. RKunhookerLE shows one or two hidden drivers. I did see hidden processes reported by GMER that could not be killed.

A:Google redirects, background ads/audio from invisible iexplore.exe, and hidden processes

Hello,Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then post them in a reply to this topic by using the Add Reply button.If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Please note that I am not a member of the Malware Removal Team and will not be assisting you in removing the infection. I'm simply helping you to post the information they need in order to assist you.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.Orange Blossom

Read other 19 answers
RELEVANCY SCORE 42.8

Has anyone else seen that when sysprepping build 1067, the user you ran sysprep from has broken windows app shortcuts.
Some do not have pictures and when you click on the shortcut, the system does nothing.

Read other answers
RELEVANCY SCORE 42.4

I have a HP Compaq Presario with Vista 32bit OS. This problem has been going on for a few days now. When I boot up my notebook, the sidebar doesn't appear, the network icon in the taskbar has a red X on it (but I'm still connected to a network), and the task manager won't appear after pressing ctrl-shift-esc or right clicking on the taskbar. When I try to bring up the task manager, all I get is a green grid icon in the taskbar which cannot be accessed. If I try to initiate task manager multiple times, I get multiple green grids in the taskbar. The missing sidebar is kind of grayed out with inaccessible menu buttons at the top, and when the cursor is placed in that area I get the "thinking" cursor. I also cannot download windows updates nor adobe acrobat updates, as it just shows the download bar at 0%. I tried to pull up the Back and System Restore folder, and it never comes up...all it shows is the blank window for it. Am I hijacked?

I ran Avira virus scan, to no good. If anyone can help, I would glad to give you more info and I would certainly appreciate it. Thanks.

A:Vista processes not working

Hi -

Does the same occur in safemode?

Yes, you could be infected. A few things 1st. . .

Tap F8 during boot-up and select safemode w/ networking.
Try and download a file. Windows Updates cannot be d/l in safemode.

See if system restore works in safemode -
START | rstrui

Is Vista retail or OEM (HP)?
Validate your installation at Microsoft Genuine Advantage

www.microsoft.com/genuine

If no problems with validation, proceed to to our Security Center, Virus/Trojan/Spyware Help Forum, to have your system reviewed by a Security Analyst. Please be sure to follow THESE STEPS carefully before posting your logs in the Security Forum. Please be patient as the Security Analysts are very busy and one will get to you as soon as possible.

Regards. . .

jcgriff2

.

Read other 9 answers
RELEVANCY SCORE 42

Hi,

This is my first post, so I apologise if I miss anything out or misquote anything. I've read all your 5 steps, and completed most of them, however I don't think I have a spyware problem so have not yet run tools such as HiJack. If you think I do, let me know and I'll run the reports.

I have this problem with IE7. The reason its posted here is because I don't know if IE is causing the issue...

If I open multiple tabs, or windows in IE, or if I'm online browsing web pages for over 10 minutes, I suddenly get where new pages won't load up. The green bar at the bottom continue's too move across at a really slow pace but nothing happens and the pages stay blank. If I close IE and reopen, the problem is still there. If I close IE, I find in task manager that the process is still running, often at around 115000k. If I click end task, nothing happens.

After i've run into this issue, i notice similar problems with other programs. For instance, WMP. If I close it, the process still runs and it cant be end tasked. Note that the process does not appear under programs in task manager, just processes.

It appears that when I have a process open, such as IE or WMP, there are 2 running in task manager. If i close WMP manually (After the issue with the internet), only one of these processes dies. The other just stays there, and can't be end tasked.

Ive tried swapping to Firefox and Opera, but both run into the same issue. Strangely, while I can no longer view web pages usi... Read more

Read other answers
RELEVANCY SCORE 42

Hello all.

Yesterday evening I received several alerts telling me that various processes had stopped working and had shut down. Fearing malware I disabled my internet connection and ran a virus/spyware scan. None turned up anything notable. Spyware removed a few items as usual, but soon after this my laptop became unresponsive, and I had no choice but to force a shut down.

I restarted in safe mode and attempted a system restore, which seemed successful until I logged in and it told me it couldn't be completed. I tried again, but the next time I tried to log in the login screen froze completely - IE, when I entered one letter of my password it was deleted the next second, the same happening when I attempted to shut down from the screen; it simply flashed black and returned to how it was. Today I managed to log on and continued to receive messages about processes being shut down but I managed to download HJT and get a log.

This certainly seems longer than most of the rest on this forum, I don't know what that means. Certainly some of the entries seem like things I haven't used in a very long time.

HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:21:26, on 26/08/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18294)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Program Files\IObit\Advanced SystemCare 3\AWC.exe
C:\Windows\system32\taskeng.exe
C:... Read more

A:Processes stopped working = unresponsive

Bump
 

Read other 1 answers
RELEVANCY SCORE 41.6

My audio rear outs used to work, but even so, i was primarily using hdmi out from my video card. I was also diagnosing BSODs at the time and sent my mobo back to asus for an rma. When it got back, I placed it in a different case and attached the font panel audio.

Due to a new living circumstance, I decided to switch back to the normal audio out, as my hdmi sound is awful on my new monitor. Problem is, now i find that the onboard audio does not work.

I have tried uninstalling/reinstalling and updating drivers, I have disabled all other drivers in the device manager, I have disconnected the front panel entirely. Nothing seems to re-enable my back panel.

Everything seems like in this thread Just got done building a new computer but... - techPowerUp! Forums
except my audio interface is ASUS, not MSI, and does not allow for front panel detection. (their solution was to "disable front panel jack detection" but this interface does not allow for this)

See the attached screenshots for interface.
Screenshot #1: As you can see, this is all the advanced settings allow. Also note that the bottom jacks are disabled, and does not see the speakers at all, even though they are plugged in.

Screenshot #2: This is with the HD settings enabled.

Screenshot #3: As you can see, there are no devices shown while HD audio is enabled, and the sound device manager does not see the speakers at all.

Screenshot #4: When I change to AC97, the computer sees the front panel, ev... Read more

A:Asus onboard audio no longer working since enabling front panel audio.

Have you tried system restore, or tried reinstalling the software/driver etc?

Read other 4 answers
RELEVANCY SCORE 41.6

I have a self-assembled desktop PC - full specs in the signature below, but in short, it has an AMD Phenom II X6 1090T processor on a Gigabyte GA-970A-DS3P mainboard, which uses a Realtek Azalia ALC887 on-board sound system. I have no loudspeakers and listen to the computer sound exclusively through a Microsoft LX-1000 headset. I also have a Logitech C270 HD webcam that has its own microphone. My PC has 16 GB RAM, a SSD and a large HDD. It runs Windows 8.1 Update 1 with all Windows updates (Patch Tuesday was this week, but my problems had started before that and I'm sure they're unrelated).

Everything is working fine, except the audio, which started behaving strangely a few days ago. The problems started suddenly and I can't think of anything that could have caused them. There were no hardware changes or any intervention in the hardware, nor did I install any new software that could have messed up things.

When playing music, it sounds muffled, with the volume very low and the voice and several instruments muted, while other instruments in the background arrangement sound louder. No graphic equalizer is on, and this happens with any player software (Windows Media Player, VLC, Media Player Classic, etc.), and any source (MP3 music, audio CDs, DVDs, videos, etc.). There appears to be no hardware problem with either my headset or the onboard audio: when I run both Windows' native and Realtek's driver sound output tests, the test tune comes out loud and clear in the tested chann... Read more

A:Realtek audio, Gigabyte mobo: strange-sounding audio, mic not working

First thing to do is disable or disconnect the Web Cam. They have been known to cause various sound problems. It may not be the problem, but eliminate it as the problem.

Stereo Mix needs to be set as the Default Recording Device.

Refresh the RealTek by going to the Device Manager, RIGHT click on the RealTek entry in the Sound section then LEFT click "Uninstall". DO NOT uninstall the drivers. Restart the PC and when Windows starts it will reinstall the sound. This usually fixes any Windows/Sound corruptions. If this does not fix it, download and reinstall the RealTek sound drivers.

Read other 1 answers
RELEVANCY SCORE 41.6

I make music with my computer and therefore the onboard sound card that came with my motherboard is disabled and I've installed a dedicated sound card instead. The soundcard I work with is an M-Audio Delta Series 2496 Audiophile PCI card. I've been using this card without problems for about 5 years.

Today the card seems to have stopped working and I suspect it has something to do with recent stuff I've been doing with my computer.

Here is stuff I did prior to my soundcard's failure to work. I have no idea which if any of these things are related to the problem or not. I also have know idea at what stage the sound stopped working.

YESTERDAY:
- a friend came with an mp3 player (Creative ZEN Jukebox). He had some data on it (using it as a kind of external hard drive) which he wanted to transfer to my computer.

- I downloaded/installed the latest driver and plugged it (via USB) to my computer. The computer recognized the device, but for some odd reason it did not show all the data. We tried several things including re-downloading and re-installing the driver and installing a media player app by Creative but nothing worked. I uninstalled the driver and the Creative app.

(at this stage I remember my audio was fine, because I listened to some music. This was the last time I attempted to use audio before first noticing the problem)
TODAY

- I realized that when installing the Creative app I had without noticing installed some bundled software that scans for... Read more

A:Solved: M-Audio PCI Delta Series Audio Card Stopped Working. Please Help

To start, I would uninstall any of the m-audio software. Once done, shutdown the system and pull out the card. Pw ON the system and let it fully boot. Download the latest driver for your sound card. Now shutdown again and install the sound card. Restart and attempt the driver install.
 

Read other 3 answers