Over 1 million tech questions and answers.

another simple problem i cant seem to solve

Q: another simple problem i cant seem to solve

ok i was stupid enough to use Cox communication cd and now that cd has taken over my computer, i went in to add and remove programs and took it off however cox is still lurking in my computer for example they changed my internet explorer instead of an E i get cox and they just modifed some of my programs to make it thier isnt that quaint any suggestions on removing those stupid things

Preferred Solution: another simple problem i cant seem to solve

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: another simple problem i cant seem to solve

My guess is most likely just have "Cox" branding of IE but it's still IE. Check here in the registry and see what you find.

Start Regedit and navigate to

HKLM\Software\Microsoft\Internet Explorer\Toolbar

Delete the keys for "BrandBitmap" and "SmBrandBitmap"

Then restart Internet Explorer for the change to take effect.

Read other 1 answers

Here's the situation: I was about to back up my files by transferring them to an external hard drive and was in Documents for that purpose, when I did something that triggered a 'spinning circle' (called a Throbber I believe). I waited for a few minutes but the throbber continued to be there, and the computer continued to do whatever it was doing, so I closed the Windows File Explorer, hoping to start fresh without a throbber. But when I opened the new Windows Explorer the spinning circle was still there and instead of being there for a few seconds--as the green line went left to right across the top and then presenting Documents, Downloads, Music, Videos, etc. when the green line completed its journey, with the spinning circle disappearing as it always does at that point-- the throbber remained, as the green line went 99% of the way across and then stopped.

My initial reaction was to give it as much time as it needed, especially since the words 'This folder is empty' were there, which is always the case when I first open the Windows Explorer for the day, but 'This folder is empty' normally disappears after a few seconds along with the spinning circle, but this time, because it was not completing the process for some reason, the spinning circle remained. I decided to give it more time, but now 'giving it more time' is obviously not enough since that was 20 hours ago! The green line is still there, 99% of the way to complet... Read more

Read other answers

Can you guys help me with this log?

The problem I have is that whenever I start the computer, I get a window that pops up that is titled "Comcast Reboot Helper" with a MPC symbol in the left corner. The message in the dialogue box says "Please wait while the installation continues. If you have removed the CD, re-insert it now.

I have run Hijack this, spybot, and security task manager and could find no reference to it. I have also looked in boot.ini and startup under msconfig and could not find anything.

Can anybody figure this out??

My scans are :

Incident Status Location

Adware:adware/dollarrevenue Not disinfected c:\windows\timessquare1.dat
Adware:adware/commad Not disinfected Windows Registry ... Read more

A:Simple problem? Can't solve it..

Sorry, the details of my problem are in the windows XP forum.
The problem I have is that whenever I start the computer, I get a window that pops up that is titled "Comcast Reboot Helper" with a MPC symbol in the left corner. The message in the dialogue box says "Please wait while the installation continues. If you have removed the CD, re-insert it now. I have run Hijack this, spybot, and security task manager and could find no reference to it. I have also looked in boot.ini and startup under msconfig and could not find anything.

Can anybody figure this out??

Read other 1 answers

Hello fellow!

I am new to these forums, and have decided to give them a question of my own.

I have a network of PCs of 100+ computers, and have a single file that I need to place on every computer. They all have a single folder shared, which is named exactly the same as the next, so my question is this:

Is there a command that I could use to copy a file from my computer to the folder on each of the Computers on my network, without having to type the command 100+ times?

In a simple way, I am asking this -- Is it possible to do this:

copy "c:\something.bat" "\\*\c:\shared folder\something.bat"

I am sure that we have all had a bit of command line experience, so this command should be pretty easy to understand.

A:Simple Command To Solve A Big Problem?

Read other 12 answers

Hey, i am having a problem loading specific videos, and i cant seem to figure out which player it is that won't load so therefore i can't even begin to solve the problem. Here is the info i have including links to specific videos:

When i click on the video it takes me to the page and it shows a big square with an Icon in the corner of a Square,Circle, and Triangle.
Here is a Link to a Video that i cannot play:


I have downloaded the latest version of Macromedia Flash Player, I have Windows Media Player 10, and I just downloaded the newest version of Quicktime, I have the Divx codec, im running Windows XP Pro if that helps at all. I did put in my system specs if you know how to check them out, I don't know how to do that since this is my first time here.

Anyway this is really annoying since it happens on alot of sites when im trying to watch funny videos that people tell me to watch. Any help would be greatly appreciated.

A:This is probably a simple problem to solve concerning video

Read other 16 answers

Hello! in dire need of some tech support. So here's the background... I was given a Toshiba Satellite A135 running on Windows 7. I got a virus and tried to DIY reformat. I DO NOT HAVE THE ORIGINAL WINDOW 7 CD and was only given a "burnt copy of windows 7" by a friend.. So i searched online, especially utube, searching for how to reformat WITHOUT a cd and decided to follow what this guy said ()... The only FILES i backed up were my movies, music, word docs, and pdf's. So anything "driver" related i didn't back up.

i did the whole f8 thing WITH my friends burnt cd inserted (i dont know if that makes a difference). If you view the utube video, i got to around 2:10 and deleted EVERYTHING. First of all there were 3 disk partion options to select instead of just one like in the video. So i deleted all three because i assumed all 3 were infected. Either way it did not let me progress and i forgot what it said, but it gave me an error window stating something about a missing screen image.

So i restarted the whole thing and just like at 1:48 my laptop gave me the option to choose the OS i'd like to install. From a loooooooong list i just chose the first which is windows 7 Homebasic Activated. I click next, accept the license terms and just like in the utube video at 2:07 i choose custom (advanced). Now those 3 partitions have reappeared. So i chose "reformat" for all 3 (the last partition doesn't allow me to choose any o... Read more

A:Let's see if you techies can solve this "simple" reformat problem...

You need to purchase an original OS disc before we can offer help.

Read other 1 answers

i have got a folder that cannot be deleted i saw many tutorials using cmd i dont know how to use can you please tell me how to delete that folder please

A:just a simple help i know you can solve it please

Right click and click delete?

What type of folder are you trying to delete??? (System files? Personal Documents?)
You may be running that folder - close the window and try delete it again.

If problem persists, try the posts below.

Read other 4 answers


When using my hotmail account I want my sent messages to save in the designated folder but they do not. How can I change this?



A:sent messages dont save (should be simple to solve)

Read other 7 answers

I’m working with the new MPlayer2.exe under windows in slave mode. I really need a solution for this seeking problem in MPlayer2, when seeking in MPEG1 program stream files.

I want to do a precise seek in a MPEG1 program stream files(m2v video with mp2 audio), using the new MPlayer2.exe precise seek command, seek <value> [type] [hr-seek].

The way I used the command is,
seek <value> [type] [hr-seek]
type = 2 is a seek to an absolute position of <value> seconds.
hr-seek = 1 means force precise seek if possible.
In my C code I gave the command with the <value> for the time position as a double, calculated for the required frame. ("seek %f 2 1", fTime).
Eg- ‘seek 4.28 2 1’

This works for MPEG2 program stream files(m2v video with mp2 audio), and other types like .AVI.
But for MPEG1 program stream files it jumps only to the key frames and not to the exact frame as expected.

I have uploaded MPEG1 program stream sample files at,

When I asked about this from Mplayer2 support team, they told me that , “When explicitly
specifying --demuxer=lavf the libavformat demuxer is successfully
opened, but it then fails to do time-based seeking properly with this
file (the only position it successfully seeks to is the beginning).”
When I asked further, Mplayer2 replied me a... Read more

A:Need support to solve the problem in libavformat, which led to a seeking problem in M

If you get the answer, will you even read it?


You have been asked to STOP creating new topics.

Read other 1 answers

Hi every one i have problem accidently my recovery partition was deleted so can i get back recovery manager is their any solve

A:is their a solve of this problem

Hi,Specs: http://support.hp.com/in-en/document/c04778325Your laptop came with Windows 10 Home 64bit.If you need to factory reset, you need to order recovery USB from HP directly.http://support.hp.com/in-en/document/bph07143http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlYou can alternatively clean install Windows 10 Home 64 bit: https://www.tenforums.com/tutorials/9230-windows-10-iso-download.htmlAdditional drivers here: http://support.hp.com/us-en/drivers/selfservice/HP-14-Notebook-PC-series/8499318/model/8902762RegardsVisruth

Read other 1 answers

I have an all-in-one Sony Vaio Desktop that has Vista home premium. This desktop is about 5 years old but for the first three and a half years was rarely used, so it's in fairly new and in really good condition.

This past couple of weeks, out of the blue the PC will reboot itself, and once it restarts I get this:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8004025A30
BCP3: FFFFFA8006217050
BCP4: FFFFFA8004267010
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Users\Username\AppData\Local\Temp\WERC8BA.tmp.v ersion.txt
Read our privacy statement:
It will ask if I want to search online for a solution but it never returns with any solution.

Does anyone have an idea how to solve this problem?

A:Please help me solve this problem

Welcome to our Forum Alexa

Without the dump reports from your computer any help would at best be a guess. If you provide this information you will be given the best help available.
Blue Screen of Death (BSOD) Posting Instructions

Read other 5 answers

Looking for a utility that will repair corrupted Outlook Express files (.DBX files).
I'm currently using a utility called Advanced Outlook Express Repair.
The problem is that this utility can't completely recover all of the corrupted Outlook Express (.DBX) files.
What other kind of Outlook Express database recovery utilities are available that will be able to fully and completely repair badly corrupted Outlook Express .DBX files?

Read other answers

Hello.My Problem Is I want to backup my netbook with acer erecovery management but it say "Hard Drive Configuration is not set to the factory default.backup aborted.

A:Can Someone Help Me Solve This Problem

HiYou are using non OEM OS, & the unit is not factory formated, you could not use acer recovery manager to backup or create recovery,. you can use Windows system recovery or there are various programs available online which can do the same job as Acer recovery Manager

Read other 2 answers

hello guys
i have 40gb seagate hard drive but my mother can't detect it.
i have genien intel motherboard version 2.1 , 550mhz
proccssor,192mb ram ,32mb agp card . plz tell what should i do .

A:help to solve problem

Did you try going into the bios and setup it there? Also check the jumper on the back of the harddrive, and maybe change the ide cable position.. instead of the very end change it to the 2nd one.

Read other 1 answers

i have 8800gt installed in my pc with the last driver
and the pc hardware with the lastes driver
the 8800gt run the counter strike 1.6 non steam very badly all the time the game shocks and the sound is straching
and i used this command and did not work
Rate 25000
cl_updaterate 101
cl_cmdrate 101

what is the problem the fps 100 alll the time
in cod4 the game is perfect what the problem
i have
core 2 dou 6320
motheboard intel 965 dqgf
2 gb ram ddr2 667
8800gt video card
power supply 500 whatt

this is a little video what sounds i hear while playing without pres Esc

A:ho can solve this problem


Please do not make duplicate posts.

Read other 1 answers

well,hope you all in good condition.
i have a problem with lag(online game)
why?i have use ccleaner or other hardware but it still the same..
are the problem cause by the internet connection?
pls tell me...

Read other answers

You could try resetting IE9 to its default settings.

Internet Explorer - Reset

You could also see if these Microsoft articles help.

Internet Explorer 9 Help and How-to - Microsoft Windows

How to reinstall or repair Internet Explorer in Windows 7, Windows Vista, and Windows XP

A:Cannot use IE9. How do I solve the problem?

You might also look into the suggestions here:

Internet Explorer 9 Error&#58; “Internet Explorer has stopped - Microsoft Answers

A Guy

Read other 1 answers

Hey guys,

A few weeks ago I posted about problems I was having whenever I put in a decent graphics card, that after a few minutes of gaming the computer would completely freeze up, and I would have to reboot. This got very annoying, and I tried a few different graphics cards, and it tends to be the better ones that are worse, as when I used a Radeon 9200SE, there wasn't much crashing at all, only a few infrequent freezes where the screen went completely black. I eventually took out my graphics card altogether and had to live with onboard graphics.

I was advised to get a new PSU by Techspot members... Mine was 300W and these are the specs that were on the sticker...

AC INPUT : 220V -240V ~/3.5A 50Hz
DC OUTPUT : +5V == /20A MAX -12V == /0.5A MAX +12V1 == /10A MAX
+5V (5B) == /2A MAX =3.3V ==/20A MAX +12V2 == /13A MAX

Combined Power on +3.3V and +5V rails shall not exceed 130W.
Combined Power on 12V1 and 12V2 rails Shall not exceed 20A.
At ambient 25 degrees C Total Power Output shall not exceed 300W.
At ambient 50 degrees C Total Power Output shall not exceed 270W.

Apparently this was not enough to run the better graphics cards -- I originally bought an Acer T135 and this is the PSU that came with it....put in another 512mb stick of RAM and then tried to put in a graphics card, which resulted in this crashing when playing games. I think the PSU was chosen only to run the components that were in the system already, and little more.

I have now purchase... Read more

A:Will this definitely solve my problem?

I would say that your PSU was the problem. 10A on the +12V rail simply isnt near enough juice for today's systems. in fact I have often sen new systems that wouldnt even boot with a power supply that delivered that few amps on the +12V rail.

I have never heard of a sansun so I cant tell you if that PSU will solve your problem or not. all PSU's are not created equal. a Low quality PSU does NOT deliver it's advertised wattage. Your better off sticking with known quality PSU's. PCP&C, Antec, or Enermax.

Read other 4 answers

when i boot my pc following error message displayed (drive not ready-system halted) what will i do?

A:please solve my problem

Do you hear a clicking noise? If so the HD may be going south.
You might replace the IDE cable and get your machine up and running.

Read other 1 answers

My problem started earlier this week when OE stopped sending email for me. (I can receive email with no problem and I have checked the settings and can find no problem.) While it appears to send messages it does not. Messages go through the outbox and into the sent items folder where they seem to have picked up some extra stuff. When I go to properties>message source in the sent items folder a two character test message will now be a 30kb message with over 2,000 random characters. I have been trying to send messages from OE (adelphia.net) to my gmail account. Each time I log into my Gmail account it tells me that my browsers cache is full. I have cleared the cache many times now, and have deleted all of my temp folders and everything I can find to delete... and it keep's happening. I have updated and run McAfee virusscan, AdAware, and Spybot S&D. I have another computer on this network with the same adelphia email in OE and it works just fine on that computer.
I am at a complete loss... I need my email to work.

I am running Windows XP and using OE6, my mail server is adelphia.net. If you need more info ask...

Here is a current HJT log. Can you please help me?


Logfile of HijackThis v1.98.2
Scan saved at 9:45:31 PM, on 1/7/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\system32\servi... Read more

Read other answers

Hi everyone, I'm new to this forum. I have a bit of a problem that I hope can be solved. I use AVG and it keeps reporting that I have been infected by a trojan horse and flagging up a .dll file in the system32 folder - sertgs.dll.

I've looked in the folder and this file doesnt appear to be in there and AVG doesnt appear to be able to do anything to solve the problem.

Now when I'm browsing the 'net sometimes if I type a URL into the address bar, I will be re-directed to a Google page which has some pre-defined seacrh for some kind of product. Im using XP and IE.

I use Ad-aware and Spybot which I run at least 2 or 3 times a week, I also have Spyware Blaster installed on my PC. I have also tried a couple of on-line scans which don't seem to spot anything.

Having tried all avenues using these various applications, I have decided to run HijackThis and post the log hoping that somebody may spot something in here.

Here it is:-

Logfile of HijackThis v1.99.1
Scan saved at 18:21:43, on 07/06/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Windows Defender\MsMpEng.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgu... Read more

A:can anyone solve this problem?

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

You may wish to Subscribe to this thread (Thread Tools) so that you are notified when you receive a reply.

Please be patient with me during this time.

Read other 19 answers

Today when I was running my computer and playing a game it shut down with creating a weird noise. So I start the computer again and it shows a screen where it says "CPU was shut down due to over heating so it does not effect any components" So I downloaded SpeedFan to see my CPU temp It was 70 C I was like thats too much so I shut it down to see if everything is good. Then I opened my CPU and the fan and the heat sink was very dirty. So I take out the fan anf the heatsink and clean them. I also noticed that there isnt much thermal paste on the processor. But whatever I cleaned the heatsink and the fan then put them back. Then I run the computer and even tho the temperature is a lot low as it is 52 C rite now. I still think the heat is a bit too much. As last time I checked when its normal its around 38-43 C. Im wondering now that if I re-apply the thermal paste will it be back to normal or wat is the reason that the heat isn't normal? Any suggestions are appreciated.

More info:
proccesor: Intel Pentium D 2.8 Gh

Thank you

A:How to solve this problem----->

You need to obtain some thermal paste, very high heat conductive, as that makes the seal
between heatsink and cpu dissipate the heat.

Read other 1 answers

When windows 7 starts I get this message "There was a problem starting msirhl32.dll the specified module could not be found"

Please help me to find a suitable solution

Thanks in advance

A:I need Your Help to Solve a Problem

Hello hiamer and welcome to Seven Forums.

Try running a System File Checker scan from an elevated command prompt (Option Two, this tutorial.)

SFC /SCANNOW Command - System File Checker

If any problems are found run the scan three times rebooting after each scan. Let us know if it helps.

Also, what antivirus are you running?

Read other 9 answers

I Had A Problem About Hidden Folder. I Know How To See Hidden Folder By Changing The Option In Folder Option. My Problem Is Whenever I Perform The Change I Mean I Try To Go To Tools>folder Options>view>hidden Files And Folder>show Hidden Files And Folder And Check It And Click Ok And Return Then Automatically This Option Becomes Again Inactive. I Dont Know Why?? Who Can Help Me??

A:I Cant Solve My Problem

Have you tried clicking apply ....before ok

Read other 1 answers

Originally Posted by xllasha

The problem is solved.. i don't know how i did it, but after several experiments, it's finally fixed. one of thses experiments helped: 1) Graphical driver update...2) cmd powercfg configuration... but i don't understand how graphical driver could solve this problem....

Hi, i have roughly the same problem as you, since I installed W10 on my laptop K550L Asus, i can't turn off completly my computer, i have always the del and the ventilator still going on. The same problem happens when the computer try to go on sleep mode i can't get it out, as it can't get to it completly.

It is really irratating, i don't want to go back to W8.1 as W10 is really useful but at the same time this is really making me loose time everytime as i have to shut it down by force (pushing long power button).

So i'm waiting for solutions or how you solved it ?

PS : I already tried almost everything, installed all graphics drivers (Intel and NVidia), one problem migth be the fact that the BIOS uptate on asus Website (ASUSTeK Computer Inc. -Support- Driver & Tools - K550LA) last only from 2014/09/15 so no Windows Adaptation ...

Thanks in advance, i am kinda desesperate ... first time i sign up in a Forum like that as i always managed in the past to find solutions by myself but now it seems i need you guys Impress me

A:Having Same Problem don't know how to solve it !

Hello polo59100 and Welcome to PCHF

It is always best to start your own thread -as you see xllasha does not know how the issue was resolved.

For starters, are the graphics drivers from ASUS or not?
A most common mistake is to use the drivers from NVidia/AMD/Intel and not the manufacturer of the Notebook.

Read other 4 answers

Attachment 10852

A:How To Solve This Problem??

Do you have a recovery disk or installation disc?
You will need to put that disc in your drive and set in the BIOS to run disc first.
Then follow instructions for recovery of OS.

Read other 1 answers

So - i am having a network issue that i cant figure out---> "vista Home Premium x64"

When ever i lock my computer and am away from it for a while i loose my internet connection, then i have to restart to get it back.... i am running fios so i should have a constant connection....I use remote desktop to that machine and also i have IM clients running where family and friends from other states and time zones can leave me a message...
what i did -
When i view my internet connection there was a RED X between my router and the globe, so i knew i had a issue - the 2 fixes so far:
1) new network cable
2) control pannel --> NIC --> turned off the options that turns off connection to save power.

A:a problem i cant solve

check out this MS KB, it addresses several issues, one of which is when the computer returns from hibernation it looses network info, specifically gateway info.

Read other 1 answers

Error: The application or DLL C:\WINDOWS\system32\dciman.dll is not a valid Windows image. Please check this against your installation diskette.

A:please solve this problem

Although it's a different driver, just do this: Error message when you start a Windows XP-based computer: "The application or DLL C:\Windows\system32\winspool.drv is not a valid Windows image"

Read other 4 answers

i have an hp p6754y desktop i had to replace the hdd, along with the hdd i got a the recovery disc set 3 discs+ a supplemental disc.i had a seagate 1T hdd hp sent a hitachi to replace it 1T also. all goes well until, its nearing completion i think, after about 3 hrs, so i hope its nearing completion, i get a red screen error that reads like this" FBI ERROR" 950 cto unknown processing error! i have loaded the discs minimum 5 times each time its that same, hp is no help, all i get is a runaround and sales pitch to reinstall it for 300 dollars, im sure this is solvable with out this expense! any help is welcome, THX, B

A:PLEASE help me solve this problem

Restart the install, when asked to do a standard install, choose custom, delete all partitions on the harddrive then choose install and let it do the default

Read other 3 answers

Hi guys.. i think i have specific problem.i have infected and windows is showing vgatray exe an saying you are not using licensed software then i have run combofix has restarted system and removed infected files but a little time later same files again placed same location when i look.i think my pc downloading files from an ip number or anything.when i look to services im seeing a new service of rpcnet.exe and RPC service.Please help me which tool can i use to clean my sytem combofix log is below.ComboFix 08-09-05.09 - Administrator 2008-09-08 22:04:04.1 - NTFSx86Microsoft Windows XP Professional 5.1.2600.2.1254.1.1055.18.633 [GMT 3:00]Running from: C:\Documents and Settings\Administrator\Desktop\ComboFix.exe * Created a new restore pointWARNING -THIS MACHINE DOES NOT HAVE THE RECOVERY CONSOLE INSTALLED !!.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).C:\Program Files\Messenger\msgmr.dllC:\WINDOWS\AppPatch\AcSpecf.dllC:\WINDOWS\AppPatch\AcXtrnel.sdbC:\WINDOWS\Downloaded Program Files\ThunderAdvise.dllC:\WINDOWS\Fonts\Framdee.ttfC:\WINDOWS\sysocmgr.dllC:\WINDOWS\system32\adsntzt.dllC:\WINDOWS\system32\adsntzt.nlsC:\WINDOWS\system32\avicapwm.dllC:\WINDOWS\system32\avicapwm.nlsC:\WINDOWS\system32\bootvidgj.dllC:\WINDOWS\... Read more

A:Please Help.. I Cannot Solve This Problem What I Do..

Please note the message text in blue at the top of this forum. ComboFix logs should not to be posted outside the HijackThis forums and then only when requested by a HJT Team member. It is an extremely powerful tool which should only be used when instructed to do so by someone who has been properly trained. ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again. Further, you did not follow the required instructions for using ComboFix which are provided when the tool is used under proper supervision as its log indicates your machine does not have the Recovery Console installed.Please create a new topic explaining the nature of your problem in the Am I infected? What do I do? forum. Describe pop-ups and system tray or desktop icons that have appeared. Explain what is "going wrong" with your computer. Note any tools you have used and their respective results.If needed, we will direct you to our HJT Preparation Guide.Thank you for using BleepingComputer as your malware removal source.This topic is now closed. The BC Staff

Read other 1 answers

Hard Disk Partition is not opening

A:Please solve my problem

Please see this...
Specifically, points 4 and 5.

Read other 1 answers

When i try to open a '*.msi' file, it always say that

visual c++ runtime library

Runtime error!

Program: C:\Windows\system32\MsiExec.exe


-not enough space for thread data

http://tinypic.com/xe0lzm.jpg picture pf the problem here

How can i solve this problem? I could install msi files before. it had worked fine, but now it have this kind of a problem, I don't know how to solve it and I searched for solutions but I didn't get any. Can anyone help? I reinstalled WindowsInstaller-KB893803-v2-x, still, it has the same problem.

I'd be very thankful if you could help me!

A:Anyone can solve this problem?

According to Microsoft "This behavior can occur if the disk that contains the Windows swap file does not have sufficient free disk space".

Read other 2 answers

Hello Folks.
First I appreciate any help with this problem.

I worked on my brothers computer who had a myriad of spyware and redirecters.
I ran HiJackthis - deleted what I saw to be suspects, ran S&D and adaware and deleted all that they found.
Computer is much better - however there is one annoying problem I cannot seem to figure out - "svchost.exe" upon bootup will run at 99-100%, and the box will take at least 5 minutes to complete boot-up unless you kill the process - then everything is fine...however about every 10 minutes or so it will re-fire and run at that high usage again. I have a feeling it is tied with his Symantec (which I hate)
Of course I see that svchost.exe is in the HiJackthis - however since it is a valid process, will deleting it hurt?


Here is Hijack list: THANK YOU!

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 9:07:35 AM, on 9/23/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Nor... Read more

A:One last problem I can't seem to solve

Read other 6 answers

i have problem in acces..

i have one table : my name table is: sort



now the data in table
5 1/08/2007
5 2/08/2007
5 3/08/2007
4 4/08/2007
4 5/08/2007
3 6/08/2007
2 7/08/2007
2 8/08/2007
1 9/08/2007
1 10/08/2007

my problem is how to creeate query in acces until the result like this
5 3/08/2007
4 5/08/2007
3 6/08/2007
2 8/08/2007
1 10/08/2007

what syntax in sql query?can u help me?

regards by credendo_vid3s

A:anyone, PLease help me to solve my problem?

It would help a lot to see the actual data.
But you could try this, create a select query and then click View>Totals.
The totals wizard will make all the columns "Total field" "Group BY".
Change the Date from "Group By" to "Max".

I would advise that you post Access/Excel Questions on the "Business Applications" Forum as you will get more responses there.

Read other 1 answers

Well recently I wiped my other computer's hard drive. Well it went as planned for the most part...until it booted up for first time. Mind you, it wouldn't be the first time I've done this so I'm pretty stumped on how to correct this little problem I have. Well here's the thing, after booting up after it was wiped, my comp's monitor remained a black screen and the CPU wouldn't cut off until I unplugged it. Upon restarting it, I was presented with the Bios screen, something I've never seen before on my computer. I pressed F1 to continue on into the welcome screen on did what I normally do, set up my internet. When I went online though and typed in the address bar, everything I typed was in double letters. (yyaahhoo..ccoomm) I re-wiped my computer and was again presented with the Bios screen and double letters. I've searched google now for a few hours and still haven't come up with a solution other than using the on-screen keyboard to type with.

Any help would be appreciated.

A:A problem can't seem to solve

Read other 9 answers

K, there's this new game out now but the recommended system requirements are higher than my system. It recommends a 3 gig processor, 1 gig ram, and a geforce 6800 or equivilent. I have a 2.6 gig processor, 1 gig ram, and a geforce 6600. If I buy, say, another half of gig of ram, do you guys think that extra ram would make up for my lack of processor speed and/or video card? (By the way, the new game I am referring to is Oblivion)

Thanks in advance.

A:Would RAM solve the problem?

that's the recommended specs. your computer will run it fine. of course more RAM is never a bad thing... but you dont need it.

Read other 3 answers

Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.

DETAIL - Error performing inpage operation.

A:how to solve this problem

You user name profile has become corrupted. Usually when this happens, Windows loads a Default user profile. You will be missing your personal files and icons on the desktop.
Go to Start/Run and type control userpasswords and press enter. Create a new user with Admin rights. Log out of the temp user account you are in and log in as the new user account you created . Now go to C:\Documents and Settings Open up your old user profile name folder. Here, Copy the Desktop, Favorites, My Documents and Start Menu folders and Paste them into your new profile folder overwriting the empty ones.

Read other 1 answers

please help i have ran virus checks and spyware checks but nothing seems to help my situation. whenever i run a program after a short while it will tell me that the program has encounteed a problem and needs to close. i am a beginner with this so please bare with me. i was recommened this site by a friend and i'm hoping you will be able to asist me with my problems. many thanks

A:help!! problem not solve...

Read other 16 answers

Hows it going, guys? I have the tech problem that no one on Earth seems to have a clue about so if anyone can help me Id greatly appreciate it. I had a DVD/CD RW drive that did EVERYTHING perfectly except for ONE thing. If I wanted to play a PC game from the DVD it wouldnt read the disc. It would install a game from the DVD just fine, but when I click on the icon to start the game it would just say "Disc not inserted" or something similar. I thought the drive must have been hosed so I got a new one. EXACT same thing happens. It will play music CD's, play DVD movies, burn CD's and DVD's, and play CD-ROM games and install either DVD or CD games. But as soon as I try to PLAY the game from DVD, like my new Half Life 2 or Unreal Tournament 2004, it just doesnt seem to read the disc so it wont start. WHAT THE [email protected]#??!! These are legit store bought copies, not ripped copies or anything like that. HELP!!!

system specs:

A:The problem NO ONE can solve

Read other 10 answers

"class installer denies the request to install or upgrade this device" Has anyone else had this error when they tried to install a printer/scanner / camera ? if so i would love to here from you because i dont know what else to try this is the 3rd time i have posted this problem

A:still cant solve this problem

which device'(s) are you having probs. installing?

Read other 6 answers

Dear all,
My computer install windows 8. After i install http://download.microsoft.com/downlo...0/EUupdate.EXE to try fonts problem in chromes... but when i install it, all icon of menu in start screen got problem! please help me!

A:I need help to solve may problem!

see here for fix: appearance problem with won 8

Read other 2 answers

hello i get this message when i try to log in to naviextras toolbox can anyone explain what i need to do to fix this.

error detected! server parameter error. authentication encryption malfunction.

any info would be really appreciated thanks.

A:hi can anyone tell me what i can do to solve this problem

Read other 11 answers

My lenovo think pad R61's Wi-Fi and bluetooth isn't working.I have on its switch an press fn+f5 but light doesn't glow on pannel. Kindly solve it.

Read other answers

Dear All,

Recently I encounter a problem at my IE address bar...

There is a "permanent" link "stuck" in my address bar, it's at the right side. I tried to clear the history, but the link is still there.

I can't delete or remove it!

Anyone who know how to remove it, please help me, the link is very annoying.


(p/s: it is shown in the file attatched)

btw...which software is the best to block pop-ups and spyware?

A:Please help me to solve this problem...

Hi and Welcome to TSF

Is it there no matter what site you view? In the address bar as shwo in your attachment, it is showing about:blank, if you change this will the link go away?
It sorat looks like some type of spyware/ browser hijacker

First follow these instructions

First Steps at Removing Malware

Read other 1 answers

My pc was affected by a lot of viruses like [email protected]
and trojan.vundo,infostealer etc. I tried spyware doctor and also norton antivirus2007.But there is no improvement.I need to restart my system for every 10 to 15 mintues.My explorer.exe file is taking at about 85% of system process,once i start internet and system is hanging,please help to resolve the problem,otherwise my system will be totally affected.

A:please help me to solve the problem

Hello and welcome to the TSF.

Please post the two text files, main.txt and extra.txt produced by theDeckard's System Scanner as instructed in IMPORTANT - Read This Before Posting A Log.

Read other 2 answers