Over 1 million tech questions and answers.

BIOS Error Code

Q: BIOS Error Code

Alright. I have been building a new PC after a recent lightning strike burned the other one. This is the 5th PC I've built and have never had any problems.

When starting the PC it goes through the motions and recognizes the boot disks; however, shortly after a blank screen come up with the POST error code "EB_". According to Intel this is a "Initialize PCI and DMA" error. What is that? And how can it be fixed?

Any help is greatly appreciated.

RELEVANCY SCORE 200
Preferred Solution: BIOS Error Code

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BIOS Error Code

I'm not all that experienced in this kind of stuff, but you could try flashing your BIOS to the newest version and making everything is plugged in properly and tight.

Read other 1 answers
RELEVANCY SCORE 59.6

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers
RELEVANCY SCORE 52.8

Please help me on how to fix my bios error code 81FB, i cannot log-in to windows xp

A:How To Fix Bios Error Code =81fb

frozenfire03,

Need more info. Is this error code appearing when you turn on your PC or when you're trying to install Windows. BIOS error code indicates a problem with the PC's CMOS BIOS, not with Windows. Please reply with the make/model of your PC and/or Motherboard and exactly when you're seeing this error.

- John

Read other 1 answers
RELEVANCY SCORE 52.8

Hello,please could you give me advice - I made a BIOS update (Version: 01.42Ap1). This update was strongly recommended in program HP support assistant. Immediately after update the error 601 occurred (for the first time...). The notebook was bought in 6-2015 and it is used only occasionally. The Battery Test in HP Support Assistant shows 0%. The program BatteryInfoView (BIV) shows Battery Level Wear 100% (which means that the battery is 100% ok). On my old (working) notebook EliteBook 8540p the BIV shows 35% level. I think that the battery is ok but something in BIOS is incorrect.Thank you for your advice.Tomas BIV - http://www.nirsoft.net/utils/battery_information_view.html

A:Error code 601 after BIOS update

Hi,  Please try updating the BIOS from HP Software Driver Download Page instead of HPSA.  You can visit the link below to update the BIOS, by entering your product details http://support.hp.com/in-en/drivers  Hope this helps ***If my post helped, click the White thumbs-up symbol to say thanks******Please mark Accept As Solution if my post solved your problem******Although I am an HP Employee, I am speaking for myself and not for HP***





I work for HP

Read other 1 answers
RELEVANCY SCORE 52.8

New X250 notebook shipped with BIOS version 1.13, and I'd like to update it to 1.17, becouse it has Windows 10 support, and I'm having power management issues with that OS. (cannot wake up from sleep, system freeze when closing lid, even with sleep turned off in that case.) I can successfully downgrade my BIOS to 1.12, 1.11, but I cannot upgrade it to 1.16 or 1.17 (cannot download 1.13, it's revoked). The update starts in Windows, restarts, but then an error message stops the update: Finished PUP flashing, Error Code: Unknown error code (0xC),ADDITIONAL_DATA:0x7Error reported from PFAT: Unknown ErrorStatus of TdkBiosRomWrite: 1ERROR 102 : Failed to perform flash After rebooting, I can comfirm that the update failed. It's strange, as I mentioned, 1.12, 1.11 can be flashed without problems.BIOS rollback protection is off, secure boot is off, BIOS user flash is enabled.I've run out of options, any advice?

A:BIOS cannot update, ERROR CODE 102

Good day and welcome to the community.
 
Sorry you're having difficulty.
If you have access to a USB CD/DVD drive, you could try using the bootable disk method:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x25...
but you might want to speak with Support (info below) about this first. A failed BIOS upgrade can be very difficult to recover from.
 
Regards.
 
 
Hungary


THINK-branded products
English, Hungarian +36-13-825-716
9:00 - 18:00 Monday - Friday

Read other 5 answers
RELEVANCY SCORE 52.8

Item A) Upgraded BIOS to 1.19 & error code '10' showing in Device Manager. Upgraded to 1.21 & same thing happens again. All tests show normal results on hardware. Tried removal & roll-back on the drivers, re-installed them, yet same error code. Machine runs perfectly. Just this one little glitch problem. Anyone know what to do? Would be grateful for any suggestions! Item B) Link for download yields 'The document you have requested is not available. You may have entered an incorrect URL or login with authorized credentials (for Lenovo Field Servicers and/or Call Center Agents only) to view the page' ; regarding ME hardware:https://pcsupport.lenovo.com/ddownloads/DS506357Not 100% certain that this issue is resolved; anyone know what happened? 

Read other answers
RELEVANCY SCORE 52

bios pasword error code CNU9333301V please....Spoiler (Highlight to read)  













Solved!

View Solution.

A:bios pasword error code CNU9333301V ,please

Hi, Enter  e9lofff136    ( 3rd character is a lower case L ) Regards, DP-K

Read other 4 answers
RELEVANCY SCORE 52

Motherboard:
PCCHIPS Model M810DLU (ver 5.2a)
BIOS:
AMI 62-1111-001131-00101111-040201-SiS740- M810D

I pulled this MB off my shelf of "projects". When I tried to make this work in the past, it always failed to boot. However, I discovered yesterday that 2 of my 3 Socket 462 "project" CPUs didn't work at all. #3 project chip - Athlon 2100+ does work.

So I put that project MB and project chip together, and the combo worked. I was able to boot from a live linux CD and from a Bart PE CD. That's the good news.

The bad news is that this combo - loaded with memory, video, drives, and any of 3 brand new 450W power supplies - occasionally fails to boot.
When it dies,

it's on one of the first 10 instructions
fails on POST Code 'dF'
resets the DRAM and CPU rates from 133 to 100 - changing my CPU from a 2100+ to a 1500+ -- PS: I know that an Athlon XP 2100+ actually operates at 1733Mhz

The Power Supply stays on and other MB accessories (CPU fan, drives as examples) continue to function. The video does not light up because it's too soon in the POST to display.

Normally that would be no big deal: look up the POST code and see where it failed. The problem is that I can't find any reference to a code 'dF' in any AMI or Award documentation or in the documentation available from PCCHIPS.

I've Googled terms like
+ pcchips + motherboard + m810d + "boot" + df
I've always gotten lots of hits, but nothi... Read more

A:Solved: Odd BIOS (POST) Error Code

Good Evening snorkytheweasel, I was just reading your post and the M810 looked familiar, quite coincidentally I have one in front of me right now. It is a M810LM slightly different but close.

It doesn't even post!

It did have an odd fail problem before it died. It originally had an Athlon in it.

I tried a Duron 1900 in it and it failed to work also.

I don't think this board is worth playing with further.

That hanging boot symptom is typical of a low 5 volt rail from the PSU.
One last effort may be tried by using a digital meter set to read a DC voltage higher than 10 volts and measuring one of the PSU drive power plugs between the red and black wires in a powered mode. That 5v is critical.

I have no idea what a df code is.

qldit.
 

Read other 3 answers
RELEVANCY SCORE 52

Hello Lenovo support, I just tried to update my BIOS on my Lenovo Z50, which has Windows 10. I chose the file this site said I just use, 9bcn91ww.exe, but when trying to install it I get the message:ErrorIHISI: Get support mode error in SMI!SMI Return Code: 0x45 Am I trying to install a wrong version or is it something else?

Read other answers
RELEVANCY SCORE 52

Hi

I've been recommended to update my bios (original threet http://www.techsupportforum.com/foru...ml#post7462354)

And this was a fatal mestake in my case. After the update i had problems to boot up again. At first it was error 32 on the motherboard debug panel. I removed all usb cables, and restarted couple of times, and eventualy it booted fine. I checked the bios, its version was the correct one (3.30)

But today i wasnt able to boot at all, first couple of tries was error 32 once again, than i removed all usb cables again. Still nothing. Support at Asrock mailed me that i should disconect all sata devices. So i did that, but after powering on the error changed to 00 and it remained this way no matter what i plug or unplug. Any help would be apriciated.

my mother board is Asrock p67 pro3 ( ASRock > P67 Pro3)
with procesor intel i5 2500k (no overclocking)

Read other answers
RELEVANCY SCORE 51.6

I've tryed taking the battery out and leaving it out to discharge the board which I was told that would take care of passwords that were stored. When I power it up and tap on f10 it goes into set up then instantly ask for power on password

Read other answers
RELEVANCY SCORE 51.6

We're planning to push BIOS updates to all our systems in the near future. However, in testing we've noticed that some systems will fail installation with error code 211. The problem seems to be related to a changed BIOS logo, since when ran manually, the updater asks if it should overwrite the existing logo or keep it. This seems to cause problems when you run the BIOS update executable "winuptp64.exe" with the "-s" (silent) argument.Is there a solution to this, like an argument that forces overwriting of logo or keep existing? Full error log:[2018/1/24 11:40:47] version 25.26
OS = Windows 10 64bit
Driver Loading....Done
System BIOS Version -> JBET54WW
Applying BIOS Version -> JBET66WW
Keep the custom start up image of the system.
System EC Version -> JBHT15WW
Applying EC Version -> JBHT17WW
AC adapter/Battery check....OK.

BIOS Flashing....
The number of retries of BIOS update = 1
The number of retries of BIOS update = 2
The number of retries of BIOS update = 3
Failed.
Error : Fail to do module option.

Error code = 211

Read other answers
RELEVANCY SCORE 51.6

I have forgot bios password for my g6 put password in 3 times system disabled shows error code 69177251













Solved!

View Solution.

A:Bios password blocked error code-69177251

Hi: Restart the PC and enter this unlock passcode... 76855897

Read other 5 answers
RELEVANCY SCORE 51.6
A:Hi my error code for my bios hp mini laptop is CNU941B0CW

HI.  Please enter this code: E9lov3p1ed Regards.





? I do not work for HP, I volunteer.? To close the topic, check "accept as a solution" the correct answer or Thumb to say thank you.? I'm sorry but you do not answer questions privately.

Read other 6 answers
RELEVANCY SCORE 51.6

how to solved bios administrator password error code is I 93539648 in Notebook HP Pavilion - 17-g105 please help me

A:how to solved bios administrator password error code is I 93...

@Kecco Reboot when asked for the password enter   22491288 REO

Read other 3 answers
RELEVANCY SCORE 51.6

i have a problem with my lenovo laptop G50 its a bios password i cant remember the password so i dont know if they is any way i can be helped with that and the other problem is that if tap three time its not bring any error code like i saw in the videos on youtube.
 
Mod's Edit: Additional information added to Subject line for clarity of issue and moved this post to its own thread.
 
 

A:G50 - Forgotten BIOS password / Obtaining error code

Welcome to the Lenovo Community !
 
Unfortunately there is no master password or magic back door which can be used to circumvent a forgotten BIOS password on a laptop. This protection scheme is due to the ease in which laptops are stolen every day. Your only solution is to try and remember the password you used.
 
Likewise removing the CMOS battery from the motherboard will NOT clear forgotten passwords on a laptop system. If you still can't remember the password then the alternative is to replace the motherboard.  Sorry.
 
What error code are you trying to obtain?
 

Read other 1 answers
RELEVANCY SCORE 51.2

Need an unlock code for a CQ57. System disabled Code 87888256. any help would be appreciated. thank you!













Solved!

View Solution.

A:Bios password, System disabled error code- 87888256

@jtwingo Please reboot and enter           38780898 Regards.

Read other 2 answers
RELEVANCY SCORE 51.2

how to solved bios administrator password error code 51764946 for hp pavilion g6











Solved!
View Solution.

A:how to solved bios administrator password error code is 5176...

Thank u soooo much sir REO51ST

Read other 5 answers
RELEVANCY SCORE 51.2

Had not used the notebook for a long time. When I tried to boot it up, a screen flashed up; it flashes up for too short a time to read properly but at the bottom, it gives F9 and F10 boot options but I could not get these to do anything. Then the screen goes to an "Enter CURRENT password" prompt. No HP or Windows logo at all. When the password is unsuccessfully entered 3 times, the following is displayed;  Password check failed / Fatal Error... System failed / CNU92032MQ and the only thing the notebook can do is be switched off, to repeat the same process. I tried removing battery and using the various the e9xxx passwords given on the blog, nothing has worked so far. (Is this a "Power On" or a "BIOS" password prompt?) Please help me recover my notebook. 













Solved!

View Solution.

A:Power On/BIOS password required, error code CNU92032MQ

Hi, Enter  e9lo71f745   ( 3rd character is a lower case L ) Regards, DP-K

Read other 4 answers
RELEVANCY SCORE 51.2

I'm trying to Restore Corrupt BIOS On HP Pavilion Dv6 Via USB (windows 7)(based on this great website http://support.hp.com/us-en/document/c02693833?_sm_au_=iJVNRSL4Rk4sP3fj)Any ideas how to solve this are welcome! I downloaded the BIOS file from http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-dv6-6000-entertainment-notebook-pc-serie... And when installing this file I get following error at step 2-7.first: IHISI: Get support mode fail in SMI!second:  BIOS did not support InsydeFlash! The files are partially installed of which a log indicating:"--- Log started: 2016/06/21 23:53:36Initializing...Log file : C:\SwSetup\sp51795\InsydeFlash.LogSettings file : C:\SwSetup\sp51795\platform.ini (found)Executable : C:\SwSetup\sp51795\InsydeFlash.exeVersion : 4.0.2.0 Build : InsydeFlashDate : Mon Sep 27 18:58:26 2010Resource file : C:\SwSetup\sp51795\iscflash.dll (loaded)App name : InsydesFlashOS Information : Microsoft Windows 7 Service Pack 1 - supportedPreparation stageIHISI Version : 193SMI_IsSupport failError code : 259(0x00000103)Cleanup StageStage Completed--- Log Stopped: 2016/06/21 23:53:39--- Log started: 2016/06/21 23:54:37Initializing...Log file : C:\SwSetup\sp51795\InsydeFlash.LogSettings file : C:\SwSetup\sp51795\platform.ini (found)Executable : C:\SwSetup\sp51795\InsydeFlash.exeVersion : 4.0.2.0 Build : InsydeFlashDate : Mon Sep 27 18:58:26 2010Resource file : C:\SwSetup\sp51795\iscflash.dll (loaded)App name : InsydesFlas... Read more

Read other answers
RELEVANCY SCORE 50.4

Purchased a Thinkpad T470 in June, 2017 from Lenovo US store. The laptop had been my daily driver for my works since then. Last week when I started to turn it on it didn't start-up. No boot screen or else. Instead it ended up with a weird musical beep tone. Later I googled it found and the term "Smart-beep". Eventually diagonalised with the Lenovo PC diagnostics app and the error was translated as Code: 10284- "TCG-compliant functionality-related error (might be the BIOS code validation failure)"- which tells that the severity is Informational. And also suggests to change the system board which might gonna be pretty expensive as I have no warranty left for this.   What to do with it now? 

Read other answers
RELEVANCY SCORE 50.4

I was messing around in my bios menu getting things set up how I prefer them and acidentaly set and forgot the power on password. Is there anyway I can get through this? I have read dozens of post and threads but none of the codes provided therein have worked for me. I look forward to hearing from you and thank you in advance.

A:Bios admin password lost for HP Stream Error code 50663152

Hi,Try: 45741194RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 50.4

Product: Pavilion dv5-2035dxOS: Dual boot Linux Mint 16 and Windows 7 Home 64-bit (no HP recovery partition)HP Recovery Disks: I have them but can't use them because the DVD laser doesn't work (CD only) Symptoms: While in normal use, screen suddenly had black and grey vertical linesAfter restart, computer turns on and fan runs, but screen is blackCTRL button flashes white light: 2 flashes, pause and repeat (BIOS corruption)Hello, I am trying to recover from BIOS corruption, hoping it's not a failing mobo. I downloaded the latest BIOS update for my system, but I can't get this file to install on an external USB using HP's instructions for restoring the BIOS. At step 1.11, I don't get the "HP System BIOS Update Utility" screen. Instead, I get this:   My questions:1. Is there any easy way to get this .exe on a USB? (I have tried 3 computers and 3 USB cards, so WTH?!)2. If not, can I just unpack it and create a bootable USB in another program by copy/pasting the BIOS file?3. Is there anything else I should try before flashing the BIOS??? Thanks in advance for your assistance. ^^   UPDATE: The "BIOS error" was actually the video card that failed due to repeated overheating. The repair shop replaced the video card and repaired the overheating problem (I didn't ask how), and my computer is as good as new.










... Read more

A:HP Pavilion dv5 BIOS corruption error code [DEAD VIDEO CARD]

For anyone who has a similar problem with their computer, my "BIOS error" (as coded by my computer's flashing lights) turned out to be a failed video card. The repair shop said this happens when computers overheat frequently, which mine often did. So, they changed the video card and fixed the overheating problem, and my computer is back in working order.

Read other 3 answers
RELEVANCY SCORE 50.4

Hi, new to forums! I got about 3-4 year old Pavilion dv6-2137eo. I was installing some updates, and then it suddenly stopped working. I got black screen and nothing else. And now, whenever i try to power on it, ok it starts, but then it flashes num and caps lock light 2 times, 2-3 secs and again 2 times. I know it means BIOS failure, but i don't know how to fix it. Anybody please help! Thank you!

A:Pavilion dv6-2137eo doesn't startup, BIOS error flash code

Hi there @Nuu5kamu1kkun3n?, Thank you for joining in on the HP Support Forums and Welcome! This is a great place to ask questions, find solutions and get help from others in the community! I read your post on the HP Support Forums. I wanted to reach out to you and help! I understand that you having an issue with blinking LED's on your HP Pavilion dv6-2137eo Entertainment Notebook PC.  Please note remove any and all USB devices. Disconnect all non-essential connected devices, as these, could cause some issues. Try to start your Notebook normally after you have disconnected everything. If that does not fix the issue, please continue with troubleshooting.  The next step would be for you to try to Restore the BIOS. You will see that the document says:  If the BIOS on your notebook becomes corrupted, such as from a failed BIOS upgrade or damage from a virus, the computer might show any the following symptoms: The computer displays the error message BIOS APPLICATION ERROR 501.The computer stops at a black or blank screen and it will not enter any of the Boot Options, such as the BIOS Setup Utility, Hardware Diagnostic Tools, System Recovery screens, etc.The computer does not boot and the Caps Lock or Num Lock LED blinks twice or the computer emits beep codes.The computer turns on, for example, the fan might spin, but there is no video on the internal display or external monitor and it does not boot into the operating sys... Read more

Read other 6 answers
RELEVANCY SCORE 50

I made the Bios update as per the rules: connected to electric supply, battery full but unable to boot the Thinkpad anymore.Serial: PC0B4EK3, model: Furthermore, I introduced  twice a service support request as my Thinkpad is still under waranty to Lenovo Managed Technical Support Acceess under references 405PHZY and 405NS8D. I received replies from [email protected] but when I try to reply to those mails they all bounce back! Receiving: Error transferring to d06av21.portsmouth.uk.IBM.COM; Maximum hop count exceeded. Message probably in a routing loop.

 Reporting-MTA: dns;d06dbl038.portsmouth.uk.ibm.com

Final-Recipient: rfc822;<[email protected]>
Action: failed
Status: 5.0.0
Remote-MTA: smtp;d06av21.portsmouth.uk.IBM.COM
Diagnostic-Code: X-Notes; Error transferring to d06av21.portsmouth.uk.
IBM.COM; Maximum hop count exceeded. Message probably in a routing lo
op.Assistance would highly be appreciated!! 

Read other answers
RELEVANCY SCORE 48

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 47.2

Hello,

Thanks for your time!

I apologize if this is the wrong place to present this!

Rescently, I found that there might be some BIOS code for an older motherboard at the following:

"BIOS updates are also available at Micro Firmware. Their internet address site is http://www.firmware.com/. You can also call them at 1 (800) 747-5465. "

Using the URL was useless plus any other URL links found on the Internet to a possible Micro Firmware web page was useless. Server off, site not found error messages.

Also, further information found on Micro Firmware is:

Micro Firmware
330 West Gray Street
Norman, OK 73069-7111 USA

Phone: 800-767-5465
Phone2: 405-321-8333
Fax: 405-573-5535

Using any of the phone numbers listed above is useless. No answer, fast busy tone, or recording that says "number is no longer in use".

This firm use to be readily available by phone but not so the last few days. And for how long I have no idea. So far I have not found any information on Internet searches, etc.!

Has the URL and phone number information changed or are they really out of business? Does anyone know the stauts of Micro Firmware?

Thanks for your time!

Jerry
 

A:A BIOS code firm for older obsolete code.

Read other 9 answers
RELEVANCY SCORE 46.8

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers
RELEVANCY SCORE 46

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

Read other 1 answers
RELEVANCY SCORE 44.8

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers
RELEVANCY SCORE 44.8

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers
RELEVANCY SCORE 44.8

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers
RELEVANCY SCORE 44.8

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers
RELEVANCY SCORE 43.2

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

Read other 9 answers
RELEVANCY SCORE 43.2

Hello everyone now im struggling so bad with this error code on my GPU i have tried several trials and none of them worked such as *uninstall and reinstall *use DDU*Older versions on my driver*latest update on windows and bios*took off battery and discharge the electricity while disabling the driver  none worked and when i conducted hardware test i got this result code : WVC000000-UO7C3G  i need so bad to know how to fix this because unfortunately my warranty expired 1 week ago and i got this issue few days ago ;c  my laptop is a gaming laptop without my GTX it is useless   

Read other answers
RELEVANCY SCORE 43.2

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).













Solved!

Go to Solution.

A:ERROR CODE AFTER A HARDWARE SCAN, RESULT CODE: WVC007002-UM7YSI

Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers
RELEVANCY SCORE 43.2

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.

Sincerely

A:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

Read other 1 answers
RELEVANCY SCORE 43.2

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

A:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault
 

Read other 4 answers
RELEVANCY SCORE 42.8

Hi,
Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 
https://1drv.ms/f/s!Aj2wii50lHANhHXE907VrpSPvHyb

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
%systemdrive%
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt







Regards, Boopathi

Read other answers
RELEVANCY SCORE 42.8

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers
RELEVANCY SCORE 42.8

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

Read other answers
RELEVANCY SCORE 42.8

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.
 

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.
 

Read other 9 answers
RELEVANCY SCORE 42.8

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers