Over 1 million tech questions and answers.

please help to configure modem and Wifi

Q: please help to configure modem and Wifi

I am having a BSNL(India) broadband connection with modem ZTE ZXDSL 831 AII. I am using a dail up for connecting to net.

Because of this i cannot connect it to my Wifi router Dlink DI 524 .

Previously i had a modem which need to be connected using dail up connection it was always connected i only had to enable or disable it , and could be easily be connected to WiFi.

but eventually using it with WiFi it became kaput ( i dont know y, but the modem started to behave weirdly and could not be connect later ) hence it was replaced by a BSNL technician . and he told that now there is no other solution than to connect the modem using dial up. because of which i cannot use my wifi .

Can nebody please explain me ,what all setting need to be change to use my Wifi with the modem, because i believe if it cud be done before y not now.

please let me know as soon as possible.

RELEVANCY SCORE 200
Preferred Solution: please help to configure modem and Wifi

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: please help to configure modem and Wifi

I don't know about the "AII" part, but the ZTE ZXDSL 831 is an ADSL modem/router. It may be acting as both, or it may be "bridged" to act as a modem only.

I also don't really know what you mean by "dail up." Since you apparently have (A)DSL service I assume you probably mean PPPoE and your account/password. If so, then ...

If the modem/router is acting as a modem only you would specify that configuration type in the D-Link's WAN section.

If the modem/router is acting as both then you have a choice of ways to use the D-Link. To simply daisy-chain it the WAN is configured for (the default) dynamic connection and you need to make sure that it is not using the same LAN subnet as the modem/router (I think that the defaults are different).

Read other 1 answers
RELEVANCY SCORE 76

Hello,
I have a BSNL wireless modem having inbuilt router.The modem has some DSL problem and cannot use the ethernet port to connect to my desktop.So I bought a new Baton DSL modem without wifi facility.

I now need the WIFI connectivity to connect with my phone for browsing net.

For that I connected the Ethernet port of new DSL modem with the old BSNL wifi modem and applied the following configuration.

I changed the IP address of router from 192.168.1.1 to 192.168.1.2

But I get only WIFI connection to connect to phone and not correctly getting the connection on desktop through the ethernet.Sometimes i get the connection and sometimes the connection lost.

I attached some images here.

pls help me to fix the problem.

Thanks & Regards

RAKESH BOSE

A:How to configure wifi modem having router with DSL modem ?

Hi there,

On the second router, DHCP needs to be disabled and assign a fixed IP within the router's IP scope (with Wi-Fi capability) i.e. 192.168.1.3 (make sure that 192.168.1.1 to 192.168.1.3 will be in the IP exclusion list).

Read other 7 answers
RELEVANCY SCORE 54

... and I see something on the web that says XP doesn't support ISA! Is that true? There are still a lot of good motherboards around which include ISA support ... my latest one is the first I've had that doesn't.

But if I put an old ISA ISA AWE 64 in a system and built it with XP does this mean it wouldn't see it?
 

Read other answers
RELEVANCY SCORE 53.2

Hi I have a SpeedStream 4200, right now the way I connect to the internet is I have to doble click on the icon on the desktop and hit connect, that it says a bunch of things like " Connecting to WAN min port" then I am connected.

I know there is a way to configure your modem so you are always connected to the internet and you dont need to connect each time. It is like you have to configure your modem as a router or something, can someone help me? or atleast explain?
 

A:How to configure modem, so its always connected to the net?

Read other 11 answers
RELEVANCY SCORE 53.2

i use my android smartphone as my modem and i need help to configure it to make it more secure from hackers.I wanna know how to reach my modem configuration page since "192.168.1.1" is not working for me.Need help on how i should find my default gateway and configure my modem!!!
 

Read other answers
RELEVANCY SCORE 53.2

I'm going out on a limb here in what I want to do. I'm not even sure it can be done.

Is there anyway for me to get a dial tone out of my laptop? I get my wifi from a Verizon UML290 LTE modem. I need it to run my credit card machine in my vehicle.

A:How To Configure Laptop Modem

Does you cc machine use Ethernet? If so you might be able to use Internet Sharing on your laptop and connect the cc machine to the Ethernet port. This is just a guess after seeing this here and here

If that wont work there still are options...... LINK1 and Link2 ..... USB Card Reader

Read other 1 answers
RELEVANCY SCORE 53.2

Hi guys,

I have an ADSL TP-Link modem model TD-8817 version 6. I want to configure it in bridge mode. The only thing I know about that is my VPI is 0 and the VCI is 35. Does anyone know how to do that step-by-step please?

Thanks.

A:How to configure ADSL modem

Step by Step instructions hope it works out for you http://whirlpool.net.au/wiki/adsl_mo...er_bridge_mode

Read other 2 answers
RELEVANCY SCORE 53.2

I just bought a pc with a pctel (i think) hsp56 modem. win98se says it's on com 4 but when i go to modems and diag to communicate with it it looks and says cant open port!
also tried to load aol and it doesn't find a modem! the computer came with no os and i've installed win98se then using the system board cd for drivers....i'm pulling my hair out..any help would be appreciated.
 

A:HSP modem wont configure!

Read other 8 answers
RELEVANCY SCORE 52.8

I am trying to connect my DSL modem to a DLINK router with no success. I am able to get into the DSL modem but not the router. I have tried 2 different routers and get the same results. My computer shows it is connected but it is not.

The DSL modem is an ActionTech M1000 and supposedly is a modem/router. It works fine directly connected to the computer.

The routers are DIR-615 and a DI-604. I have used the DI-604 in the past with no problems.

For both of them, I connected from the modem to port 1 on the router. Then from the router's WAN to the computer.

I turned off DHCP in the modem and got the same results. It is PPPOE and according to them it is dynamic, not static.

I powered everything off and on and still no connection.

Any help would be appreciated.
 

A:How to configure a DSL modem and Dlink router

Read other 7 answers
RELEVANCY SCORE 52.4

Hey,
I have installed my wireless hg520s modem
and u know u have to connect the ethernet until u install wireless, im not sure how to make it wireless on a talk talk website it says go on to 192.168.1.1 and change the setting, but i says the username and password are both admin, but when i type it in it doesnt work like the password is wrong or somethink,
please could some one help me
 

A:Configure hg520s modem for wired connection

Try resetting it to factory defaults and then connecting using the defaults in the manual.
 

Read other 3 answers
RELEVANCY SCORE 52.4

i have a Seagate 2TB expansion drive plugged into my Telstra Gateway Max (technicolor TG799vac) modem (ADSL2+). i would like to set it up as a download resource for all the gaming files and mods i have created for rfactor. i have no idea what is required to set it up and i'm not even sure what to look for to do it either, i have seen the word NAS mentioned but i really would like more info. is there a tutorial somewhere as i cant really find much that can help.

thanks in advance.
Angus94

Read other answers
RELEVANCY SCORE 52.4

Before Firefox 3 when I clicked on Firefox it would come up bringing with it the dialer box and patiently sit there 'loading' until the connection was made. It would then take me to my home page.

Ff 3 up goes immediately to page not found. I was able to set the configuration to stop it from automatically going into offline mode, and I'm sure there is a setting in about:config to extend the length of time Firefox waits to load a page. Can anyone direct me to that specific setting? I would greatly appreciate it.

Running winxp if it makes any difference.
 

A:How to configure Firefox 3 to wait until modem connects

Read other 10 answers
RELEVANCY SCORE 51.6

Just moved in and brought my ADSL wifi modem Belkin F1PI241EGau with me, but over here there is cable and the provider supplied me with their modem motorola Surfboard SB5101E. I would like to connect these two to use the wifi. Would that be possible?

Thank you
 

A:Can i connect my adsl2/2+ wifi modem/router to cable modem?

Not really. The ADSL router doesn't have the correct WAN interface. You need a standard router with an Ethernet WAN connection.
 

Read other 3 answers
RELEVANCY SCORE 51.6

Tried configuring wifi router on my laptop but the login page was not loading.....neither on chrome nor on IE.
Later Successfully configured Router through mobile, i was able to use internet through wifi on my mobile without any problem.
When i again tried to use wifi on laptop it shows following errors. Pls help ...

Read other answers
RELEVANCY SCORE 51.2

I'll try over and over but I didn't succeed. I'll try with ipxnet, but.. I think that way it's only for network or IAN, and I want to play with another friend with modems or internet.

Could anyone please helpme to do it correctly?

Thanks

Joe.
 

A:Solved: How Can I configure Worms for modem and network play in DosBox?

Read other 10 answers
RELEVANCY SCORE 50.8

Hello Guys,

I wanna Know That I hab a nokia siemens SL2_141 modem which is not in use...beacause I dont have anymore BSNL connection. Now I am using A Wireless Modem of MTS. Recently I have Buyed New Phone I wanna Use wifi...
So ,Wanna Know From You Guys...

HOw Can I connect Internet of my Wireless Modem to The Wifi of nokia siemens SL2_141 Modem.I have Attached A photo So that U ppl Understand properly..

Pls, Help me out with this Problem
OS-Window 7 (32bit)

Uploaded with ImageShack.us
 

A:Connect a Wireless Modem to ADSL modem for Wifi

The "nokia siemens SL2_141" is a modem/wireless router combo; I assume that "A Wireless Modem of MTS" is also a modem/wireless router combo.

If my assumption is correct you can use the Nokia as an ethernet switch and wireless access point ...

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If ther... Read more

Read other 3 answers
RELEVANCY SCORE 50.8

I was searching for configuration help online but couldn't find it please help me

Link to router specification:
Wireless N Router 2LooK 2L-WR307 300Mb/s be?i?

A:How to configure wifi router 2L-WR307

Knowing how you plan to use your network will determine what kind of config you need. Please elaborate a bit.

Read other 5 answers
RELEVANCY SCORE 50.8

How do I properly setup a Linksys wifi router to work behind a network.

what ive done so far:

1. Turned off DHCP on the wifi, since my network already has DHCP
2. Turned off NAT service on the wifi
3. Turned DHCP configuration on the wifi so that the existing network will asign IP

I can connect to WIFI but cannot get internet. At first I was able to, aftter turning it off and turning it back ON, I cant get internet. Is my configuration correct?
 

A:Configure Linksys Wifi behind a network

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc. Note that you should use the same SSID and encryption key for the secondary router but a non-conflicting channel. I recommend channels 1, 6, or 11 for use for the best results.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (o... Read more

Read other 1 answers
RELEVANCY SCORE 50.8

I ordered a wireless card for my laptop and I found a tutorial on how to take my lappy apart and replace it but do I need to do anything else after installing it? Software, configuring, etc? Replacing with the same wireless card.
 

A:Do I need to configure anything after putting in a wifi card?

Read other 16 answers
RELEVANCY SCORE 50.4

Hello fellas i need to connect my dumb Xbox 360 to live for it does not play any movies!! and asks to connect to live that i am unable to do.
OKey here is the plit-> i have a usb modem that i connect into my laptop wihch has wifi n all that now i create an adhoc n/w first on lapi--the xbox detects and connects but still test connection fails(the xbox is unable to connect to the adhoc n/w)
second i tried creating a adhoc n/w on my xbox-->lapi connects to that n/w but still the test conncetion fails on the xbox

I have checked "Allow users to use this n/w" for my USB modem connection which i use to connect to the internet In Properties-->Sharing
But here it asks to select the n/w connection out of 3 options Wireless conn,Wireless conn2,Local Area Conn.
Sometimes it shows only Wileless Conn and LAN
i tried every possible combination of all these settings but nothing is working.
The internet on my laptop works fine.
I am using Win 7 Home Premium.
I just need to connect my Xbox to my laptop wirelessely and use the internet connection my laptop is using.

i tried some manual settings of ip.subnet n dns server on my xbox n lapi, in this case the xbox connects to the network (while connection test) but does not connects to laptop.
HELP guys
 

A:Solved: wifi laptop+wifi xbox360+USB modem--->not able to connect to live!!!

Read other 13 answers
RELEVANCY SCORE 50.4

hi i'm new here...i need some help here...at my home i have a d-link router i have configure the modem to set it to be the same ip address in my old file server ip..and now my wifi can't auto connect for my phone and laptop..they has to insert a static ip address to connect the wifi...
 

A:Solved: wifi not connected after configure the ip address

Read other 16 answers
RELEVANCY SCORE 50

my HP 15 116 laptop wifi cannot connect to wifi router modem AND it keeep on saying "cant connect to this network" whereas it  can work perfectly fine on smartphone wifi hotspot . please fix it ......... DONT MAKE ME REGRET ON BUYING HP LAPTOP ....

Read other answers
RELEVANCY SCORE 50

Hi there,

My Canon MG 6120 printer used to work with all the computers in the house wirelessly. On upgrading the wifi modem, it is no longer recognised.

How do I get it to be recognised again?

Many thanks, Tony (using Win 10 64 bit on Gateway NV79 c0mputer)
 

A:Changed Wifi modem and cannot start wifi Printer

Canon PIXMA MG6120 Wireless Photo All-In-One Printer

Select Wireless Help, then select Re-establishing Printer Connection After A Network Change?.

The manual will download and appear in .PDF format so you can read it.

The information and diagrams you need will be there.

Note: You need to have Adobe Reader or some other PDF reader installed first, in order for the manual to load and be read.

--------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hey guys,

Let me explain the situation first.

I have a Desktop PC and a netbook. They are in the same room and so is my router. My router is a 2Wire from AT&T. All these devices support wireless G.

My file transfer speeds from my desktop to laptop is going at a dismal rate of around 800KB/s. I am connected to my router at 54Mbps with my WiFi cards on both the systems. I am trying to figure out where this bottleneck is and try and speed this up.

-I am in an apartment building. There is least interference on channel 11 so I have set my router to use channel 11.

-The router is set to work at either B or G but I know I'm definitely connected by G on both the computers since I'm connected at 54Mbps.

-I have full WiFi signal on both computers and there is hardly any interference in my apartment that I am aware of. My internet bandwith is perfectly fine.

-Transfer rates between these two computers through a LAN connection is blazing fast. Its connected at 1Gbps and transfer rates are around 100MB/s

-If I connect the desktop and netbook in the Ad Hoc mode, I get a pretty steady 2MB/s

-In the registry, I have set the NetworkThrottlingIndex to FFFFFFFF hex (so throttling is essentially turned off) but that makes no difference.

Does anyone have any ideas that could help me?

Thanks!

A:Help me configure my WiFi network correctly please? Speed issues.

I have another question:

My netbook has Draft N wireless. I have heard that the maximum speed on that is 150Mbps. Is that for both send and receive? Also what would it be real world?

If I had a WiFi wireless N 150Mbps send/300Mbps receive card on my PC, and this draft N card on my netbook, will I have enough transfer rates to stream my BluRay discs from my PC to my Netbook? I have heard that BlurRays have a maximum bit rate of 40Mbps which means I should be totally good to go right?

Read other 1 answers
RELEVANCY SCORE 49.2

Hi everyone,

I need help in disabling the Intel ProSet Client without uninstalling the software and I want Windows Zero Configuration to be started, and Enable the Microsoft Client for Wireless Connections through a Batch File or a Script.

Can any one help me in writing the batch file or a script file to do this

Note: I don't want to uninstall the Intel ProSet WiFi Client Software from my System. I just want to Disable the Services.

Thanks in Advance,
With Best Regards,
Muvva

A:Batch File To Enable Windows To Configure My Wifi Client

^ as I understand it , you can goto services and
disable the unwanted services (make them manual)
& enable the required services and save the settings .

............................
I wish I were right

Read other 2 answers
RELEVANCY SCORE 49.2

Hello,

I have two network adapters in Windows 10 one wifi for connecting to internet and one Ethernet for local network.
I need to configure wifi adapter to public network and Ethernet to private network but i can't.

Inverse it work ( wifi to private and Ethernet to public ) but I don't need that.
(only wifi adapter have option to be discoverable by others pd in Network Settings -> advanced options )


I need to share files by Ethernet AND NOT by wifi.

Any suggestion?

Thank you

Read other answers
RELEVANCY SCORE 44.4

Hi,

I recently bought dlink D2750U WIFI ADSL modem/router, for my ADSL internet connection.

But I have now changed my ISP, who provide internet via cable(not telephone line). The ISP guy provides a cable modem(old modem) along with it.

I have connected my PC this way:
Cable modem -> Router -> PC through RJ45. I am able to access internet from my PC, but I am not able to get wifi working on the router. And I am logging onto internet through a dial up connection.
Questions:
1) Please help in configuring the router to get wifi working.
2) Also, my default gateway seems to be either 0.0.0.0 or blank. So, I am not able to login to the modem unless I remove the modem connection. Please let me know if I am doing anything wrong here.

Here are a few more details:
Output of ipconfig: http://pastebin.com/Zr9Eb7L7
 

A:Using dlink D2750U Wifi Modem/Router As a Wifi Router

Hey Narain. The D-Link unit you have appears to be a combo unit (modem and wireless router) since it connects straight to the RJ-11 phone line. This unit won't work with an ISP that provides service by way of coax cable. The D-Link will work if you want to use DSL, but you need a cable service compatible modem or combo modem/router if you use cable service.

ftp://support.dlink.co.in/broadband/DSL-2750U/manual/DSL-2750U_C1_Manual_IN_1.00.pdf
 

Read other 6 answers
RELEVANCY SCORE 44

hi
I have a strange problem.when i turn on my wifi on my laptop (MSI CR 620) My modem is turned off and the power light is on (red) and the configuration is reset !!! But I never had this problem with Windows 7.
(i reset my modem and factory setting but No avail)

my modem Is Planet

Read other answers
RELEVANCY SCORE 43.6

HI! i'm just curious to know if there was a way of connecting my USB modem in such a way that i can use it to have wireless access in my house (more specific room).

Currently i have a Cisco Wireless-N Home ADSL2+ Modem Router. it has a DSL port and 4 ethernet ports. i can alreadly pick up the wi-fi signal when i just switch the router on but obviously theres no internet connection yet.

am i over complicating issues or is this not possible? please help urgently
 

A:Usb modem with wifi router possible?

If you are currently using DSL for your Internet connection, is there a problem with replacing the USB modem with the Cisco Modem router?
 

Read other 1 answers
RELEVANCY SCORE 43.6

Hey guys in the last day or so, my Technicolor TG587n v3 modem's wifi disconnects and then restarts whenever I reboot my galaxy S4, wired internet stays connected but wifi turns off, any ideas?

A:Modem drops wifi

Okay. Who is your ISP. There has been known issues for that model. That is why most go with their own equipment for Internet. Too many issues with the all-in-one gateways.

You could just turn off the onboard wifi, and use a Wireless Access Point instead. I use the Engenius ECB-350 for my network. Never have had any issues with it. I can pick it up to 75' from my house.

Read other 4 answers
RELEVANCY SCORE 43.6

Hello. I work from home. I have a dual band modem from Cox cable that is hard wired to my desktop via Ethernet. The brand name is Netgear. I also have a Linksys N300 router which my job requires . I log into a company server from my desktop to do my work. Everything works fine until my kids get home and launch the modem wifi. Then I experience lagging and drop outs. I have asked Cox about this and they tell me to have the kids use the 2.4 gigahertz wifi because the Ethernet is using the 5 gigahertz connection. I did this and I still get drop outs. Can anyone suggest a way to set this up so I do not have drop outs when others are on the same modem? If there is no way what other options do I have? Thanks in advance for your help
 

Read other answers
RELEVANCY SCORE 43.6

Dear Sir

I have two wifi connection (for two different ISP) in my office.  One is on 192.168.2.1 and second is 192.168.1.1
All wired PC's are connected with 192.168.2.1 and all wireless devices like laptops mobiles etc are connected with 192.168.1.1.
Last week my wifi 192.168.1.1 as down, so I connected all my devices to 192.168.2.1
Now the my 192.168.1.1 modem wifi is working fine.  I am again trying to change all wifi devices to connect 192.168.1.1, but after some time / after resetting these devices .  It changes back
to 192.168.2.1 series like(192.168.2.3 or 192.168.2.4 likewise) .  I tried everything like ipconfig /release, ipconfig /renew then ipconfig /flushdns ipconfig /registerdns, cleared arp cache restart dns services but all in vein.
Although they are connected with 192.168.1.1, but still if we execute the command ipconfig /all it again shows 192.168.2.3 or 192.168.2.4 and so on.  I don't want to give any static LAN IP.
Please help how can I change this lan IP back to 192.168.1.1 series. and change IP of all wifi devices according to their wifi modem connectivity 
Like if we connect any device with 192.168.1.1 modem its LAN IP should also change to that series 
Bye

Raj

Read other answers
RELEVANCY SCORE 43.6

I will be traveling to Canada for about 3 months this summer.

If I have a laptop with a working US Wifi and modem, will I be able to do the same connections in Canada?

Thanks
 

A:WIFI, modem, Canada and US

Read other 7 answers
RELEVANCY SCORE 43.2

  Greetings, for some reason, I have not been able to connect to modem, with hi speed internet, just wifi,can someone please help me with this. I have connected Samsung support  several times, they had said it was a driver, and after many attempts were able to update the driver, toredo tunneling , system worked for a short time, then reverted to wifi. Thanks to anyone who can help.
 Samsung NP300 Laptop
 4 gig mem, intel premium processor, Windows Home Premium version with SP1, 64 bit program
 
Thanks,
   Jim
 

A:Please help, can not connect to modem with ethernet , just wifi

What's your Ethernet setup? Modem to router to PC?

Read other 3 answers
RELEVANCY SCORE 43.2

I have been having issues recently in connecting my sleekbook to my wireless modem. After having the pc for 3 years, I recently changed to a new internet service provider. After utilising this new modem for roughly 2 months, I am now encountering a problem where the internet icon is telling me i have "no internet access" but when i select the icon (bottom right of the screen), under the wifi option, it states "limited". This problem seems to be a strange one as (1) i have taken all updates received from HP; (2) other devices are connected to the modem. i did attempt to address the issue through other suggestions within this blog but nothing seems to work. Please advise me how to pinpoint the problem and address; (3) the  driver status for "Ralink RT 3290 802.11bgn Wi-Fi Adapter" indicates the device is working properly, (4) I ran a full scan and no viruses were detected, (5) I reset both the TCP/IP settings and Winsock catalogue but nothing worked (6) I did try to use other drivers but they all failed. Hoping to get assistance. 

Read other answers
RELEVANCY SCORE 43.2

hi i recently resetted my mtnl modem DNA-A212 after which i am not able to connect my mobile to wifi.It is asking for password which i am not able to get.
 

A:connecting modem wifi to mobile

https://in.answers.yahoo.com/question/index?qid=20111229223429AAubudc
 

Read other 1 answers
RELEVANCY SCORE 43.2

I'm a bit of a rookie when it comes to Networking but here goes.

I've got a D-Link DSL-604+ 22Mbps Wireless router with built-in ADSL modem and a D-Link DI-624 108Mbps Wireless Broadband router.

Obviously the DI-624 that I recently purchased doesn't feature an in-built modem so instead of blowing $50 on a D-Link ADSL modem with Ethernet connectivity I was hoping to use the ADSL modem feature in my old Wireless router (604+) as my modem for the DI-624.

I called D-Link support but unfortunately after an hour of following live instructions from their support staff, I ended up nowhere.

They instructed me to disable DHCP and NAT features on the 604+ and plug an ethernet cable into it's LAN PORT 1 and plug the other end into the WAN PORT on the 624.

I plugged an ethernet cable into the DI-624 LAN PORT 1 and into my computer's Ethernet port in order to configure the DI-624.

After configuring the DI-624 via its web configuration web page, I could get the 108Mbps network up and running but without the access to DSL.

If anyone any of the above mentioned products and can provide a tip or a link to a guide or something, that would be great.

Thanks
 

A:Using a D-Link DSL WiFi Router as a Modem

Read other 6 answers
RELEVANCY SCORE 43.2

Hello, I have been using a nic and ics to share my usb modem internet with my xbox via ethernet cable.

I have recently installed a wifi dongle to use as an access point to share the same usb internet with a smartphone.

But now my first connection has limited or no connectivity... Can I share the same internet with them both?

If not how do I switch ics between them as I can't get my original local area connection back to using the ics?

Im using xp sp3
 

A:limited or no connectivity ics nic wifi usb modem

Can I share the same internet with them both?Click to expand...

My guess is "no" but that's only a guess. Let's take a quick look at ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 43.2

Hi I have a program called Connectify Dispatch that enable multiple internet connections load balancing, which speed up downloads mostly and sometimes web browsing, my problem that is whenever I use an USB modem Ethernet and WiFi internet stops, this happened since windows 8 but windows 7 works just fine.
This drives me nuts since my internet access is mostly via 3G USB modems but the fastest connection is through a router.

Read other answers
RELEVANCY SCORE 43.2

I had a Beetel 440BXi router (you wouldn't know of this brand, it's India only), and everything was fine with it. This week, the ISP guys came and changed the modem to the different model, Beetel 450TC1. They say it's an upgrade.

But now I'm having a strange problem. It works fine on my desktop (ethernet), and my laptop through WiFi. But my NOT on my phone. I'm sure it's not my Phone's issue because I've tried connecting to other networks, and it works successful. Still, I've tried putting new/different versions of the ROM on my phone, but nothing works. Everything was fine before the router change.

I have no idea what the problem is. I complained to the ISP but they insist it's the phone's problem.

So I've tried all this:
1. Resetting the router to factory settings
2. Using WEP instead of WPA PSK 2.
3. Reflashing my phone.
4. Using 802.11b instead of 802.11g+b.
I'm using Windows Mobile 6.5.3 on my HTC Touch (Elfin).

Can you guys help? What can be the problem?
 

A:Strange new problem with Wifi modem.

Read other 6 answers
RELEVANCY SCORE 43.2

So Comcast wants me to use their high speed router/modem but the Linksys router I have (plus their modem) has been working quite well for many years.

They promise my speeds will be higher. Right now I'm at 54 Mbps. No problem here, if it ain't broke...

Should I just install it?
 

A:Should I use Comcast's wifi router/modem over my own?

Read other 8 answers
RELEVANCY SCORE 43.2

hI aLL, i am looking to install an internal modem and wifi card to my pc. Can sum1 perhaps make some suggestions of compatible hardware in this regard. Thank you kindly

Read other answers
RELEVANCY SCORE 43.2

hello thanx for the acceptance.
Ok first and foremost i own a gateway out of warranty Xp series.
dsl modem works just fine i am currently on it surfin the web on my desktop.
when i plug it into my laptop it will not recognize i assume bcuz i cannot surf the web. even tho the light on the ethernet socket lights up.
i have another laptop that when i do the same it works perfectly. ok heres the biggy.

When i search for my router it wont even show up m neighboors router or any other wireless connections, even the connections that dont belong to me.
i have no idea nad been callin intel and gateway and want me to pay $199 due to out of warranty issues . I Am gratefully thankfull to all and any who view this thread and share there info , god bless.
ok i was reading some other thread to c if i can find the answer , but i found out u may need this information,..... under my device mangaer /network adapters i have this
1394 net adapter
direct parallel
intel(r)PRO/1000 PL Network Connection(with a yelllow cicrle exclamtion)
INTEL(R)PRO/WIRELESS 3945ABG NETWORK CONNECTION(with a yelllow cicrle exclamtion)
and six Wan MIniports ... aswell as when i type ipconfig IPCONFIG /ALL on the cmd i gget this

windows ip configuration
C:\documents and settings\owner

hope this other extra info helps u to help me - also when i try to install a new version on the 3945abg wireless pro it says installation fails evry time i d.l again from intel. also when i double click on the pro wireless intel 39... Read more

A:WiFi and modem dilemas so frustrating

aswell as when i type ipconfig IPCONFIG /ALL on the cmd i gget this

windows ip configurationClick to expand...

Bingo! The above indicates you are missing the network drivers on your computer! (Re-confirmed by what you report in your Device Manager)

Suggest you go this driver thread to go to the Gateway web site. Look up your specific computer model and download / install the network d
 

Read other 42 answers
RELEVANCY SCORE 43.2

I have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computers?
This my network map:

Thanks in advance
-Ramchan

A:How to connect two computers via a wifi modem?

Welcome to Seven Forums,

If you wish to have the 2 computers communicate and do files/printer sharing and both computers have Windows 7 (I'm assuming), you may setup a Homegroup.
HomeGroup - Microsoft Windows

Please let us know if this is what you wish to accomplish or not.

Read other 4 answers
RELEVANCY SCORE 43.2

Hi. In over my head (not hard to do in this area ) I have Centurylink service and currently are renting their modem/wifi box. I want to replace it with my own modem and my Linksys EA4500 N900router. What do I need to buy to replace the modem so that it is compatible with Centurylink? and do I need to know the IP address currently associated with it to set up the new modem?
Thanks!
 

A:Replace Centurylink Modem/Wifi

You need to check either them to see if they allow that and what all you need to configure and let them know, they may not allow modems that aren't approved from them work or may charge you for modem rental anyways as it may be part of their service. You may also loose the ability for them them to provide you troubleshooting if they are unfamiliar with the units you choose. It appears they are a DSL provider and not Cable is that correct? For DSL you'd have to program the router with your DSL username and password to connect, so you'll need to know that. You shouldn't need to know any IP address for the modem as that's assigned by them but you will need to be able to access your router to configure it, so either it's IP address or use the CD Wizard to configure it.
 

Read other 2 answers
RELEVANCY SCORE 43.2

Hello all,

I use an ADSL for Internet. The modem is wiry (not wireless). I plug the Ethernet cable from that modem into my laptop for accessing Internet. Everything until now is OK. But I want use the Internet on my cell phone as well. For it I need to use the wifi card of the laptop, this time, as a sender, for wifi Internet accessing for the cell phone!

1- Is it possible?
2- If yes, How to configure that card please?

Thanks.
 

A:Using laptop as a wireless modem for wifi uses

What kind of phone do you have? If you have wifi, I don't understand why you can't go into the wifi setting on your phone, find wifi & amongst other possible networks should be yours.
Or just get the manual for it , online if need be & go for it. Good luck.
 

Read other 9 answers