Over 1 million tech questions and answers.

Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

Q: Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

I have been having the worst time with my custom built PC since it was built. I am getting random BSOD's here and there, but there does seem to be a correlation between a greater occurence when playing games. Often I can't play a high-resolution game for more than an hour or two before I crash.

I heard a recommendation to try Prime95, and I get an insta-BSOD when doing the Blend test.

I haved tested the memory and did not see any problems.

Here is the dump report. Any help possible would be greatly, greatly appreciated. I unfortunately am under the suspicion that this is a CPU hardware error and the CPU will have to be replaced, but I do need some form of help or confirmation before I take the next step RMA'ing it.

Sys Info: Intel i7 920, 6gb OCZ DDR3 1600 RAM, ATI Radeon HD4870, Asus P6T Deluxe V2, Win7 64.
Hardware is about 2.5 years old. OS Installation is less than a year old.
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\111811-22339-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c53000 PsLoadedModuleList = 0xfffff800`02e98670
Debug session time: Fri Nov 18 15:31:14.301 2011 (UTC - 5:00)
System Uptime: 1 days 16:08:48.254
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8005fa4028, fe200040, 60114a}

Probably caused by : hardware

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8005fa4028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000fe200040, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000060114a, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`031ddb58 fffff800`02c1ca3b : 00000000`00000124 00000000`00000000 fffffa80`05fa4028 00000000`fe200040 : nt!KeBugCheckEx
fffff880`031ddb60 fffff800`02de0513 : 00000000`00000001 fffffa80`05dcba10 00000000`00000000 fffffa80`05dcba60 : hal!HalBugCheckSystem+0x1e3
fffff880`031ddba0 fffff800`02c1c700 : 00000000`00000728 fffffa80`05dcba10 fffff880`031ddf30 fffff880`031ddf00 : nt!WheaReportHwError+0x263
fffff880`031ddc00 fffff800`02c1c052 : fffffa80`05dcba10 fffff880`031ddf30 fffffa80`05dcba10 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`031ddd50 fffff800`02c1bf0d : 00000000`00000008 00000000`00000001 fffff880`031ddfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`031ddd90 fffff800`02c0fe88 : fffffa80`065ebdf0 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`031dddc0 fffff800`02cce52c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`031dddf0 fffff800`02cce393 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`031ddf30 fffff880`0459253c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
fffff880`031fd4a0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : USBPORT!USBPORT_NeoValidDeviceHandle+0x3c
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

Followup: MachineOwner
---------

RELEVANCY SCORE 200
Preferred Solution: Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

Here are the missing JCGriff2 and perfmon files. Again, any help in regards to this problem I am having are tremendously appreciated. I can fix near anything with a computer, debugging this deep however escapes my knowledge and I don't know who else to turn to.

Note there are four dumps from today. 2 were while playing Skyrim. 2 were while testing Prime95 on Blend mode, insta-crashed within seconds.

Read other 8 answers
RELEVANCY SCORE 88

Is Windows 7 . . .
x64
full retail version
- What is the age of system (hardware)? = 1 week
- What is the age of OS installation = 2 days

works fine at desktop ..then whislt gaming crashes whilst playing.
Im now the proud owner for $500 worth of ram (2 different mhz / voltage types)
and this problem still around.
Ive gone throught no less then 8 win7 installs varying from win 7 pro - win 7 ultimate.
Ive memtesetd fine same with furmark and even prime.
But its not the single testing that seems to break anything.
Only 3d games running.
Now at a loss.
Hoping you guys could spot something amiss.
Otheriwse ill have to RMA the board and get a gigabyte board
as i never had issues with them ..and this is the 1st time using the new i7's ,
as my old system was a Q9550.

A:Random BSOD / Insta boot.

  
Quote: Originally Posted by UN1T


Is Windows 7 . . .
x64
full retail version
- What is the age of system (hardware)? = 1 week
- What is the age of OS installation = 2 days

works fine at desktop ..then whislt gaming crashes whilst playing.
Im now the proud owner for $500 worth of ram (2 different mhz / voltage types)
and this problem still around.
Ive gone throught no less then 8 win7 installs varying from win 7 pro - win 7 ultimate.
Ive memtesetd fine same with furmark and even prime.
But its not the single testing that seems to break anything.
Only 3d games running.
Now at a loss.
Hoping you guys could spot something amiss.
Otheriwse ill have to RMA the board and get a gigabyte board
as i never had issues with them ..and this is the 1st time using the new i7's ,
as my old system was a Q9550.



No DMP files included in upload try this method

If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.

Read other 2 answers
RELEVANCY SCORE 87.6

Hopefully someone can help with a problem that's baffling me.

I have a AMD FX (tm)-8150 Eight Core.

It gets random blue screens with a different driver and cause in the dump every time.

If I do a stress test with prime 95 it will crash and blue screen everytime.

If I change the processors in windows 7 (64bit) to use only 4 cores it will run fine with out any errors or blue screens can do the stress test on them 4 cores with no problem..

Highest recorded temp is 49c on 8 cores and then it crashes.
Highest recorded temp is 44c on 5 cores and is stable.
49c still isn't high but as it hit 49c and crashed every time I reseated the processor.

I did notice that the mother board has a 8 pin esp CPU but only had 4 pins from PSU. So i changed PSU to one that had 8 Pins still same problem.

Also did memtest86 and that was fine.

I've included the dumps, hopefully someone can help. If you need any information just ask.

A:Random BSOD, Always when running Prime95

Hi Rob887.

With other bugchecks, there is stop 0x124 BSODs, too; which is supposed to be a hardware issue.

Code:
BugCheck 124, {0, fffffa800e4c98f8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------
And, if it BSODs during Prime95 with such a low temperature,it can be said that the CPU is failing to take the stress.

Better you replace the CPU.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Let us know the situation after doing those. For any further issue, post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers
RELEVANCY SCORE 86.4

Hello everyone! I'm new to this forum and would like to take the time to thank whoever it is that will be helping me.

So I've recently built a new computer. while I was browsing the internet, programs and services started to run very slowly, to the point where the internet connection died, and my computer then proceeded to BSOD. I figured it was a blotched windows update that caused the BSOD, as i had previously interrupted the update. After restart, I successfully updated windows, and everything went smoothly. However, today, I was still nervous about to the BSOD, so I ran LinX and prime95 to check system stability. About 2 hours into Prime95 torture stress test, the Computer BSODed on me while i was showering. I have not overclocked anything in the system. I'm starting to worry that there may be some hardware issues I'm unaware of, and I will need to find out within the next day or two in order to return those parts. Thanks to anyone that can solve this issue, or give me some insight. files 1 and 2 are attached in order of BSOD 1 and 2. This is rather urgent, As I need to returned parts within 36 hours if hardware is at fault..

A:BSOD at random times, once during browsing, once during prime95

Bump

Read other 2 answers
RELEVANCY SCORE 80.8

Hey Guys, really need some help here. I've had my PC for 4 Years Now and for the past year or so I have been getting the BSOD. I've taken my machine in, had it tested, repaired etc. The last issue was RAM and had it replaced and the computer ran fine for almost 5 months until recently. Ok enough of the storytelling. Here is my DMP file using the SF Tool.
Thanks!

A:Daily BSOD Usually While Gaming or Shortly After

Apologies! I updated my thread with the required information.

Read other 9 answers
RELEVANCY SCORE 80

To anyone able to help,

A month ago I bought a reasonably high-end gaming PC with the following setup:
- Gigabyte G1.Sniper 2 motherboard with integrated network card and Creative Labs X-Fi sound card
- SilverStone ST1500 (1500W) PSU
- 2 x EVGA (NVIDIA) GeForce GTX 580 set up in SLI
- 16 Gb DDR3 RAM (Kingston)
- Intel® Core? i7-2600K CPU @ 3.40 GHz
- Cooler Master V8 CPU Cooler
- 2 x Corsair Force 3 SSD (225 Mb) set up in RAID 0 (Stripe)
- LiteOn Blu-Ray / DVD Burner/Reader/Drive
- Windows 7 Ultimate 64-bit OS, DVD already included Service Pack 1
- Windows Office Home and Business 2010
- An old Dell PS/2 keyboard from my previous PC
- An old Dell USB mouse from my previous PC

The problem I face is as follows:
- At random times and intervals, my PC will lock up, sometimes play sound in an infinite loop, and crash shortly thereafter through a BSOD (roughly 4-5 times a day).
- I tried disabling programs and pinpointing whether it was a specific program that caused the crashes, but ultimately, the crashes occur under different program combinations and don?t seem to be related to any of the programs listed above (not sure though).
- Even though I have set up Windows to make a minidump file, it has only created an actual file ONCE (which leads me to believe it may not be related to the regular BSOD?s).
- I did manage to take snapshots of the BSOD on several (4) occasions though.
- Rebooting the PC 2-3 times will get me back in through ?Start Windows normally? without a... Read more

A:0x000000F4 BSOD's (daily) on gaming PC (Windows 7 64-bit)

The combination of SLI and SSD's may be an issue here. The minidumps are rather vague... MSFS and RDPBUS.SYS. Have you checked the memory. It is probably okay but a voltage or timing adjustment may be needed
 

Read other 1 answers
RELEVANCY SCORE 80

I have been having multiple BSOD daily and some hard hang ups. I have updated my drivers from the ASUS site and updated my display drivers from NVIDIA with no avail. BSOD have slowed down in frequency but I continue to get them.

Bluescreen viewer, shows problems with ntoskrnl.exe.
The system has had BSOD since I built it.
HDD and Ram checks have all come back as no problems.

I have attached log files. Any help and direction would be greatfull. Thanks in advance!

A:Multiple BSOD daily during Web Browsing and Gaming

Start Here
Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 80

Running:
GPU - R9 380 4gb.
CPU - i5 4460.
RAM - 8gb balistix ram.
PS - CS550 M corsair.
Mobo - MSI b85 G41

I have been crashing very frequently while running Overwatch (exists out of the program) as well as occasional 1-2 a day *BSODS usually during game. This is more rare when idle on the desktop screen. I ran Win10 verifier in order to investigate what could be causing this, it seems like an AMD driver.
The reason I suspect it is AMD is because of the error message I received when trying to investigate what is causing all these issues (by running verifier to stress my drivers)

ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+105c )

However, not all the BSODS that occur while gaming point to the GPU. The BSODS have been ranging in type such as irql_not_less_or_equal, various memory issue ones, paging file size, as well as a 'attempted to write to read only position' (or something).

Various fixes and diagnosis I have tried:

Install a fresh copy of windowsMake sure all other drivers are updated (including bios)Changed various graphical settings ingame (ranging from lowest to highest, all crashing, as well as various different screen rates)Ran the *more* stable Crimson 15.11.1 beta driver, still crashes .Tried 16.3 crashes, now running 16.7, still crashes.Set a longer TdrDelay value (now currently at 8)Ran memtest86 overnight to check ram. Passed 6 full tests, no errors.Used DDU and reinstalle... Read more

A:BSOD daily while gaming & watching videos

Hello frebreez3 and welcome to TenForums

I would tend to agree with your diagnosis so far. I captured a few pointers from the dump files below and these confirm there are problems with the AMD drivers. You are using the most recent dated 18 Jul 2016.


Code:
fffff801`c63bb838 fffff801`37e5bd94Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0xbd94


0: kd> lmvm atikmpag
Browse full module list
start end module name
fffff801`37e50000 fffff801`37ed1000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Browse all global symbols functions data
Timestamp: Mon Jul 18 21:32:52 2016 (578D3CF4)
CheckSum: 0008A233
ImageSize: 00081000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

BugCheck D1, {ffffe0001c717080, 2, 0, fffff801378e0bf0}

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : dxgkrnl.sys ( dxgkrnl!DxgNotifyVSyncCB+0 )

There is evidence of memory corruption but I would guess it is more to do with the drivers than bad RAM. However, I should point out that... Read more

Read other 3 answers
RELEVANCY SCORE 78.8

Hey.
I have a pretty old Pc and lately (in the last week or so) I've started encountering Daily BSODs and PC going super slow mainly when gaming/after exiting games. (usually a restart fixes it).
I've installed BSODViewer and here is the dump:
I've encoutered same behavior before (not on so big scale, had a few BSODs in a week) but it somehow went away so I forgot about it. (Ik its stupid to do but yea..)

What could i do to stop it from BSODing? Im getting a new PC soon but until then i want this to hold on until then with minimal costs.

For some reason your tool doesnt want to run :l

A:Different BSOD Errors on regular/daily basis mainly when gaming

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers
RELEVANCY SCORE 78

Hi Guys,
I am new to the forum,
My Pc started crashing recently after my old PSU(600w) busted and i replaced it(400w),The funny part about the bsod's is i get different codes each time....eg (d1 then a then 3b..etc) at first i thought it was maybe a virus... so I formatted The PC and then installed the latest drivers i could find for my PC...The results were only slightly different from the past (The computer would stay up a little longer before it crashed), I ran a memtest and RAM is fine, Then I thought it was my GPU overheating....So i cleaned the fans of both GPU and processor and Replaced the Old Thermal Compound.....Still no improvement... and here I am Now


My Specs:-
Motherboard:- Asustek P5Q Se
CPU:- Intel Core 2 Quad Q8300 Yorkfield
Socket :- LGA 775
GPU:- Nvidia GTX 460 2GB (ZOTAC)
RAM:- 2x2GB DDR2
HDD:-Seagate Barracuda 500gb

A:Random BSOD's while gaming and surfing web(BSOD Codes vary each time)

Code:
Host Name: TKMOHAMMED-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: TK Mohammed
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 4/17/2015, 1:19:57 AM
System Boot Time: 4/20/2015, 12:59:14 PM
System Manufacturer: System manufacturer
System Model: P5Q SE
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable.

Read other 1 answers
RELEVANCY SCORE 77.6

Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran

A:Daily BSOD random times random Apps

  
Quote: Originally Posted by bskaggs


Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran


Hi bskaggs,

Welcome to Seven forums.

Here are you bugcheck details:






Quote:
YMBOL_NAME: dxgmms1!VidSchDdiNotifyInterruptWorker+b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME: dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5164dc13

FAILURE_BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b

BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b


Update your video driver from here and not from the Windows Update:

Drivers & Downloads | Dell US

Also, perform a clean startup to ensure no conflicts with the background programs:

Troubleshoot Application Conflicts by Performing a Clean Startup

Keep us posted with the results so we can advise you further.

Read other 1 answers
RELEVANCY SCORE 77.2

Hi guys,

Can you please help me with my BSOD's? I don't know what to do anymore.
I get this BSOD daily:

ntfs.sys
page_fault_in_nonpaged_area

It mostly crashing during multitasking / gaming. Then I reboot and I often get a new BSOD after several minutes of multitasking / gaming. But the system can also crash overnight when the pc is doing nothing.


I run:

Windows 7 32 bit
This is not the original OS on the system that is Vista but a few months after purchase I received an update CD for Windows 7.
Age of system 1- 1,5 years.
Age of OS: 1 year

I tried:

- Reinstalling Nvidea drivers and chipset drivers (because of missing coprocessor driver, fixed this but not the bsod problems)
- New antivirus I now run MSE with Defender switched off.
- Memtest pass
- Run a cpu stress test nothing happened. Temps normal max about 60 degrees.

A:Random BSOD's daily

Did you try disk check? Disk Check

Read other 9 answers
RELEVANCY SCORE 77.2

I have a new Windows 7 Premium 64bit system, the computer has almost nothing on it but it is bluescreening, I can't find anything in particular that sets the BSOD off, it just happens usually one per day and there is no consistency in the error code, I will attach all of the minidump files that have occured on the system thus far. Could someone please give me a hand with this?

Some notes:

I use a 700W power supply, it is a no-name power supply which I have heard can cause problems.

I let memtest run for 8 passes and it came out clean

Also ran a syscheck /scannow which showed no issues

I use an old TV with VGA input for a monitor at the moment until I get a real computer monitor

I have not tried reloading the OS although I can do so if someone thinks it would be in my best interest to give it a try.

Please let me know your thoughts, and thank you for your time.

A:Random BSOD Daily

  
Quote: Originally Posted by Twister1089


I have a new Windows 7 Premium 64bit system, the computer has almost nothing on it but it is bluescreening, I can't find anything in particular that sets the BSOD off, it just happens usually one per day and there is no consistency in the error code, I will attach all of the minidump files that have occured on the system thus far. Could someone please give me a hand with this?

Some notes:

I use a 700W power supply, it is a no-name power supply which I have heard can cause problems.

I let memtest run for 8 passes and it came out clean

Also ran a syscheck /scannow which showed no issues

I use an old TV with VGA input for a monitor at the moment until I get a real computer monitor

I have not tried reloading the OS although I can do so if someone thinks it would be in my best interest to give it a try.

Please let me know your thoughts, and thank you for your time.


5 of nine caused by your video driver

Please re-install and follow these

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.


Code:

Loading Dump File [C:\Users\K\Desktop\New folder\112910-15693-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symb... Read more

Read other 3 answers
RELEVANCY SCORE 77.2

I've been having this problem since september. It's not getting worse. But it's really annoying. About every day I have a BSOD.


System info:

Windows 7 Home Premium 64bit OEM
ASRock 890GX Extreme3
AMD Athlon II X3 445
Corsair 4GB DDR3-1333 TW3X4G1333C9A
EVGA GTX460 768 MB


I'll include some minidumps that I have. However, not one for every BSOD since CCleaner apparently deletes them.


Thanks in advance for your help!

A:Daily, random BSOD's

ADrone, uncheck dump files in Ccleaner; then it will not delete them. You can delete them manually. Please read this thread, follow the instructions and post back. We will be glad to help you. The additional files you will upload will help us help you better.

http://www.sevenforums.com/crashes-d...tructions.html

I will get you started; but please follow the instructions in the tutorial and upload the rest of the files. I suggest that you uninstall Norton using this removal tool: Tool. Norton is a known cause of BSOD's on some Win 7 systems. Download and install Microsoft Security Essentials in its place.

Outdated drivers can and do cause memory corruption and BSOD's. I find the following outdated drivers loaded on your system. They are really obsolete. Two of the three were involved in the crashes. Update these drivers.





Quote:
ahcix64s.sys Tue May 27 01:51:49 2008 - AMD AHCI Compatible RAID Controller, AMD Support Search. This driver was in volved in your crashes.

CamDrL64.sys Sat Feb 03 13:17:27 2007 - Logitech QuickCam Pro 3000. Downloads. if you cannot update this driver, uninstall the camera. It is obsolete.

LVUSBS64.sys Sat Feb 03 13:05:16 2007 - Logitech Camera driver. Downloads. See above.

Read other 1 answers
RELEVANCY SCORE 77.2

I'm getting BSOD's about once per day, doing random things or sometimes when I'm AFK.

I ran memtest86 for 16 hours it went thru it's complete set of 10 tests 5 times and found 12 hours total. I assume it ran 10's of thousands of test, is any too many do I need to replace my RAM or ???

I appreciate any help you can offer.

A:BSOD Daily Random

Please delete all dumps NOT from 2016 in %systemroot%\minidump and create + upload a new zip.

Read other 7 answers
RELEVANCY SCORE 77.2

I'm really at my wit's end. Been getting random BSODs since last year. Did all the troubleshooting stuffs that I could think of. Badly need your help. BSOD messages are too random that I can't identify what is causing it.

Steps done:
Replaced old HDD that has numerous bad sectors. All HDD are now running fine. Chkdsk pass. No bad sectors.
Updated all drivers directly from manufacturers
Got an SSD for OS. Not related but still same. System is faster though!
Memtest86+ passed!
Changed antivirus app just in case - same
Reverted from ReFS to NTFS - same
SFC /scannow - same
Reseated cables/ram modules

Thanks in advance!
Zip file of dump files here. Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Read other answers
RELEVANCY SCORE 77.2

Hi

I keep getting BSOD on my computer, at first i thought it was the ram or motherboard, however i replaced the ram and the motherboard has been tested under RMA

there is no pattern to the BSOD, some days it will work without issues, some days it will BSOD under heavy CPU load and some days it will just do it sitting ideal

I attached the dump files

anyone with any idea what could be causing this from the mini dumps would be very helpful

Computer
CPU - Intel I7 920
RAM - 6GB GSkill
GPU - Zotac 295 GTX
HDD: 60GB SSD and 1.5TB
OS: WIndows 7 64 bit

A:Daily Random BSoD

Hi -

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 77.2

Hi All,

My computer was working fine and then yesterday it started crashing, even when no applications are running.

The first crash occurred yesterday when I was remoting into my home computer via teamviewer. I changed 2 windows update settings via gpedit.msc. I disabled auto-restart with users logged in for automatic update and disabled configure automatic updates. After applying the changes, the computer crashed about 5-10 minutes later. I'm not sure if its connected but i reverted the changes to default. The crashing still occurs.

Now it seems to crash randomly, even when no applications are running. Approximately 5 days ago I installed a new fan on my CPU and I also upgraded from a geforce 970 to a geforce 980ti. I ran games for about 2 days with no problem, so I would be surprised if it would be linked to those issues. Temperatures are all well below normal, I've been monitoring with HWMonitor.

I slipped through the mini dumps but could not make heads or tails of them as there were multiple .exes crashing.

I have the most updated audio, video, and motherboard drivers.

I've attached everything! I would greatly appreciate any assistance.

Thank you,

Bryan

A:Random BSOD - Daily

Welp, I decided to run memtest.

I got failed on 4 slots, 5 sticks.

Then 2 sticks, failure slot 1 & 3. same sticks failure slot 2 & 4. other 2 sticks, failure on 1&3 and 2&4.

I think my motherboard is dead.

Read other 0 answers
RELEVANCY SCORE 77.2

DAVINDER-PC-28-May-16_121512_71.zip I am facing this BSOD since the update of windows 10 in my PC time and again, to be more precise in the reply, i can add that usually i use my pc for cs 1.6 game, browsing & watching movies !

Read other answers
RELEVANCY SCORE 77.2

Hello,

This is my first time posting here, but I've been having a bunch of trouble with my system and I've run out of ideas. Experience wise, I'm a touch above average, so I may not know how to do many of the more complex things.

I've been getting BSOD's almost daily recently, and sometimes multiple times per day. I've tried rebuilding Windows once and it fixed the problem for only a day or two. The problem just seems to randomly happen, so I don't know if it's a specific program causing it. Far as I know I've got the latest drivers.

System specs can be found in my profile.

A:Random Daily BSOD's

First of all, please remove cfosspeed program, it appear to be the cause in one crash dump

Secondly, please download third party called memtest86, burn it to CD using ISO Recorder v3 and let it run for at least 7 passes.

BUGCHECK SUMMARY:

Code:
BugCheck 4E, {99, 2c649, 2, a8340}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------
BugCheck C4, {f6, 208, fffffa8009fbfb30, fffff8800534de2b}

Unable to load image \SystemRoot\system32\DRIVERS\cfosspeed.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cfosspeed.sys
*** ERROR: Module load completed but symbols could not be loaded for cfosspeed.sys
Probably caused by : cfosspeed.sys ( cfosspeed+f1e2b )

Followup: MachineOwner
---------
BugCheck C1, {fffff9801656cee0, fffff9801656ca82, a10118, 32}

Probably caused by : memory_corruption ( nt!MiCheckSpecialPoolSlop+83 )

Followup: MachineOwner
---------
BugCheck 1A, {782, fffffa8006ce6560, fffff98013100000, fffff8a009628af0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2beb9 )

Followup: MachineOwner
---------
BugCheck 19, {3, fffff900c23dcf40, fffff900c23dcf40, fffff900c23ccf40}

Probably caused by : Pool_Corruption ( nt!ExFreePool+75b )

Followup: Pool_corruption
---------
BugCheck 1A, {8884, fffffa8001c27a40, fffffa8001c28ca0, 502}

Probably caused by : memory_corruption ( nt!MiRelinkStandbyPage+c6 )

Followup: MachineOwner
---------
Update speedfan as well:

Code:
0148d000 fffff880`0149... Read more

Read other 8 answers
RELEVANCY SCORE 76.4

Hey, I noticed that my PC is unstable when I set ASUS Bios setting to Optimal (performance mode) and PC freezes up after few minutes, so I decided to run it in normal mode without any overclocks or anything, just plain default bios.

I ran Prime95 Blend Test for 30 minutes and it failed.
Then I decided to run Small FFT test, it ran for about 30 minutes then one of the cores failed, then after few minutes BSOD popped up.

I don't understand BSOD's so hope somebody can help me find the faulty component.
CPU temperatures were at about 73 C.
results.txt:
[Sun Feb 01 12:29:08 2015]
Self-test 28K passed!
Self-test 28K passed!
Self-test 28K passed!
Self-test 28K passed!
Self-test 28K passed!
Self-test 28K passed!
Self-test 28K passed!
Self-test 28K passed!
[Sun Feb 01 12:34:55 2015]
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
[Sun Feb 01 12:40:15 2015]
Self-test 40K passed!
Self-test 40K passed!
Self-test 40K passed!
Self-test 40K passed!
Self-test 40K passed!
Self-test 40K passed!
Self-test 40K passed!
Self-test 40K passed!
[Sun Feb 01 12:46:05 2015]
Self-test 12K passed!
Self-test 12K passed!
Self-test 12K passed!
Self-test 12K passed!
Self-test 12K passed!
Self-test 12K passed!
Self-test 12K passed!
Self-test 12K passed!
[Sun Feb 01 12:51:18 2015]
Self-test 56K passed!
Self-test 56K passed!
Self-test 56K pass... Read more

A:BSOD During Prime95, first Core #5 failed, then BSOD after few minutes

Though the crash dump has nothing to do with prime95, but it detected hardware failure. Quoting from your post ....





Quote:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.


It indicates that the CPU is failing to bear the stress, so the BSODs are obvious.

You need to replace the CPU. Either RMA it, or if the warranty is expired, get the same one. AMD Processor FX-8350 Black Edition Vishera 8-Core 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W D8350FRHKBOX - Newegg.com

If you want to know what the BSOD says ... it blames Avast.

Code:
BugCheck 3B, {c0000005, fffff80003314e12, fffff8800984ecc0, 0}

*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : Unknown_Image ( aswSnx+266db )

Followup: MachineOwner
---------
To deal with it, Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD after doing these.

Read other 9 answers
RELEVANCY SCORE 76.4

Hey! I'm the happy owner of a normally well-working PC. But since, I don't remember when, (Probably more than one year) I've getting BSOD and Freezes random, I'll explain more detailed.

For a long period, I've been getting one freeze once a day, everyday. It usually happen after a short while after I've turned on the PC and logged into my account. (It doesn't happen if I just let the PC do nothing, but if I transfer, or anything it will most likely happen within 5-30 min) If I press ALT+CTRL+DELETE a blue screen will pop up and say "Preparing security options, please wait" (Or something like that, I'll upload picture in the following days, when I find my camera) I've no idea what is causing this issue, but I've been having it for almost a year. Until now I've been dealing with it, but it's been too annoying.

Now for the blue screen.

Blue screen has been more of a mystery it comes once everyday, for a month, and then nothing the next month, and keeps on like that. I've fixed other peoples BSOD, (Which was pretty easy) but I can't seem to get of rid of this one. It creates no DMP file, and doesn't give me a driver name. I've no photo of my BSOD, but I've written it all down, and I'll upload the photo later with the freeze. I'll give you the entire summary here. (I've tried to update my drivers, and the most common stuff.)

"A problem has been detected and windows has been shut down to prevent damage

KERNEL_DATA_INPAGE_ERROR

If this is the first time you've... Read more

A:Random BSOD and freezes daily.

Welcome to SevenForums.

Please upload the files following: http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 76.4

I really have not been able to make heads or tails of this. Nor have I seen a consistent behavior either. Hope you can help.

A:BSOD - Random daily occurence

Welcome to SevenForums

Those .dmp files are taking a while to load, I will report back if and when they load. Meanwhile:

Problematic software:

Code:
Start Menu\Programs\DAEMON Tools Pro Public:Start Menu\Programs\DAEMON Tools Pro Public
Daemon Tools
Please uninstall DAEMON Tools. It uses a driver called sptd.sys which is known to cause BSOD-s in Windows 7. Uninstall the software using Add/Remove Programs. Reboot the system. Once the program is uninstalled, run sptd.sys uninstaller to remove the driver from your system.

As an alternative, many people recommend the use of Total Mounter or Magic ISO

OR, Prefer 7zip out of all:
Download and install 7-Zip, it is free +it can extract any iso file. So you can use it the way you want to. At a max you'll miss some chapter chooser screen of a DVD title.

AVG contributes in blue screens, suggestion: Uninstall it and replace with Microsoft Security Essentials (at least to test). You may install AVG back later (Newer version preferable) if we know that it wasn't causing your BSOD-s. Use the AVG removal tool and reboot your computer whenever you are prompted to.AVG | Download tools and utilities
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full... Read more

Read other 9 answers
RELEVANCY SCORE 76.4

I accidentally posted this in the wrong place yesterday so I'm trying again here.

For around 2 months now my PC has been shutting down unexpectedly and rebooting at random times. Sometimes at idle, sometimes while downloading, sometimes while browsing. Several weeks ago it was bad - it went through several reboots before coming back up. I ran memtest86+ after that, from the CD, and it rebooted twice during the memtest - off the disc - but then memtest ran fine after that. I then made the mistake of scheduling a checkdsk. In the middle of the checkdsk it rebooted again, corrupting something, and Windows would no longer load. I thought I had lost everything. Thankfully I used the Windows 7 32 bit install disk to attempt a repair, which failed at first, but then managed to repair the system by using a restore point.

For a few weeks everything seemed okay after that - no new crashes. Now for the last 2 days I've had several reboots again, just like before. I have no idea what is causing it. I get no BSOD - it just instantly starts to reboot with no warning. I ran WhoCrashed and it said:

Crash dumps are enabled on your computer.
No valid crash dumps have been found on your computer.

One thing I've been noticing in the event viewer is a ton of Microsoft-Windows-SharedAccess_NAT events. The events say:

"The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager ha... Read more

A:random reboots without BSOD - sometimes several daily

Well there's not that much to go on without dump files but we'll run some hardware tests just to be sure.
Your PC shouldn't never restart whilst running memtest unless it's hardware related.

We can try running Prime95 to stress test your CPU. Please run it for 2 hours.
Follow these instructions.

Hardware - Stress Test With Prime95

Then can you please run memtest86 again to see if the RAM is failing, you must make sure you run it for at least 8 passes.
Follow these instructions.

RAM - Test with Memtest86+

Post back the results.
From what you described I'm not too sure, well first you say it reboots all the time then a system restore fixes it which makes me believe it's driver or other software related, but then you say it rebooted twice on memtest which makes me believe it's hardware.

I do believe it's hardware, let us know the results.

Read other 9 answers
RELEVANCY SCORE 76.4

At random points throughout the day I get the BSOD and my computer restarts.

I haven't installed any new hardware, I've played around with the my antivirus and such as well as ensuring everything is firmly in my motherboard.

I have attached my minidump file in the hope that some kind soul can end my misery.

Kindest regards,

Clive.

A:BSOD at random intervals daily.

  
Quote: Originally Posted by CliveK


At random points throughout the day I get the BSOD and my computer restarts.

I haven't installed any new hardware, I've played around with the my antivirus and such as well as ensuring everything is firmly in my motherboard.

I have attached my minidump file in the hope that some kind soul can end my misery.

Kindest regards,

Clive.


ASACPI.SYS
The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOTbefore).

Read other 2 answers
RELEVANCY SCORE 76.4

System specs.
Attachment 42892
Memory dump
Attachment 42893
Common things I'm doing when it Bsod's
Gaming / reading on the internet / walking away with nothing running to grab a pepsi.

Things I've done
Upgraded all drivers for all hardware, Reinstalled windows, Ripped my hair out.

(Thinking I might just downgrade back to vista, never had these issues with it...)

Let me know if anyone can help. Amazed this hasn't Bsod'd on me while typing this.

A:Bsod random, happens daily/hourly

Format your drive and do a clean install....

Read other 3 answers
RELEVANCY SCORE 76.4

Started getting BSODs near daily seemingly at random times. I recently added a new SSD (Crucial M4 - 128GB) to my laptop and ever since then the BSODs have started (I used to have a random BSOD every couple of months before, with a mechanical drive) . Of course I re-installed Windows 7 with the new drive. SSD has been in for about 2 months now. BSODs seem to have increased in frequency from when the SSD was first put in.

BSOD Dialogue box copy below.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002A15477
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:Daily BSOD - Random Times

Hello and welcome aboard.

► You haven't uploaded the MSINFO32 file. Please do it, so that we can have more info about your computer.
Click Start Button
Type "MSINFO32" (without quotes) in the search box, click the resulting link. The system information window will open.
File> Save. Save to desktop, give the name "MSINFO32"
Wait for the processing time.
When done, zip it and upload it.

► There is a very old network driver.

Code:
lmvm netw5v64
start end module name
fffff880`03e9b000 fffff880`043d6000 netw5v64 T (no symbols)
Loaded symbol image file: netw5v64.sys
Image path: \SystemRoot\system32\DRIVERS\netw5v64.sys
Image name: netw5v64.sys
Timestamp: Thu Mar 26 21:51:24 2009 (49CBAB84)
CheckSum: 00533DE3
ImageSize: 0053B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It is Intel Wireless WiFi Link Driver. Upload it from http://downloadcenter.intel.com/Default.aspx .
Next, upgrade the network driver.

1] download the network card driver from manufactuer's website.
2] Then reinstall the driver:
3] Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
4] Double click to expand "Network adaptors".
5] Right click your network card and click Uninstall.
6] Check "Delete driver software for this device" check box, click OK.
7] Restart the comput... Read more

Read other 7 answers
RELEVANCY SCORE 76.4

Hey everyone,
 
I have been experiencing the Blue Screen of Death at-least 2-3 times daily. The events happen at random (system idling, watching videos, browsing websites). I have updated all hardware to the latest versions. A lot of places I searched referenced memory issues. I have run a full diagnostic through Windows MemDiag tool and results have came back with no issues/errors.
 
I am honestly at a loss for words with this issue, and hope someone may be able to shed some light on this.
 
Attached are the Windows error logs. I have the sysdump file as well as a Speccy log, but was unable to upload those files.
 
Here is some basic system info:
 
Operating System: Windows 7 Professional 64-bit SP1
 
CPU: AMD Phenom X4 9750 - Agena 65nm Technology - 22 °C
 
RAM: 4.00GB Dual-Channel DDR2 @ 267MHz (4-4-4-12)
 
Motherboard: ASRock N68C-S UCC (CPUSocket) 35 °C
 
Graphics: VO320E ([email protected]) - 256MB NVIDIA GeForce 7025 / nForce 630a (ASRock)
 
Storage:
 
298GB Seagate ST3320620A ATA Device (ATA) 38 °C
931GB Seagate ST310005 28AS SCSI Disk Device (SATA) 34 °C
 
Optical Drives: ATAPI DVD A DH16AAL SCSI CdRom Device
 
Audio: VIA High Definition Audio
 
- CrystaPad

A:Experiencing Random BSOD Daily

I realize that you have attached files, but these are downloads and I have a very strong aversion to downloading anything which I don't know exactly what it contains.  This is not personal, just a precaution on my part.
 
Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download Security Check by Screen317.
 
Double click on the download and choose to run the program.
 
A screen similar to the one below will open, click any key to run the program.
 

 
When the scan is finished there will be a log, copy and then paste your log in your next post.

Read other 2 answers
RELEVANCY SCORE 76.4

For around 2 months now my PC has been shutting down unexpectedly and rebooting at random times. Sometimes at idle, sometimes while downloading, sometimes while browsing. Several weeks ago it was bad - it went through several reboots before coming back up. I ran memtest86+ after that, from the CD, and it rebooted twice during the memtest - off the disc - but then memtest ran fine after that. I then made the mistake of scheduling a checkdsk. In the middle of the checkdsk it rebooted again, corrupting something, and Windows would no longer load. I thought I had lost everything. Thankfully I used the Windows 7 32 bit install disk to attempt a repair, which failed at first, but then managed to repair the system by using a restore point.

For a few weeks everything seemed okay after that - no new crashes. Now for the last 2 days I've had several reboots again, just like before. I have no idea what is causing it. I get no BSOD - it just instantly starts to reboot with no warning. I ran WhoCrashed and it said:

Crash dumps are enabled on your computer.
No valid crash dumps have been found on your computer.

One thing I've been noticing in the event viewer is a ton of Microsoft-Windows-SharedAccess_NAT events. The events say:

"The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error."

I'm including some logs from the SF_Diagnostic_Tool. You'll see ... Read more

A:random reboots without BSOD - sometimes several daily

Suggest you give this a try...
Use the System File Checker tool to repair missing or corrupted system files

Read other 1 answers
RELEVANCY SCORE 75.6

I bought this computer a little while back and it would BS occasionally and i just kinda ignored it, but for the past couple months, it has been insane, like 3-4 times a day it'll blue screen on me at seemingly random moments, sometimes i won't even be on the thing at a time and i'll notice it just blue screened! So as I'm sure anyone would be, it's really starting to piss me off, lol, so any help would be awesome. Sometimes, the BS is different, sometimes it's a System_Service_Exception or it's Memory_Management. Here's some of the info during the BSOD:

System_Service_Exception
*** STOP: 0x0000003B, 0x00000000C0000005, 0xFFFFFA6000CF1C74, 0XFFFFFA6008071010

NETIO.SYS - Address 0xFFFFFA6000CF1C74 base at FFFFFA6000CDD000 Date stamp 47919aa7

A:Seemingly Random BSOD's 3 or 4 times/daily

Hello and welcome, please post this for the BSOD squad to see : Blue Screen of Death (BSOD) Posting Instructions

Read other 6 answers
RELEVANCY SCORE 75.6

I've been struggling through BSODs almost daily. Sometimes it can stay up for a couple of days, and sometimes it would crash without even doing much. I have only included 10 from this month.

Unfortunately, I cannot remember what I may have done that messed up my system other than installing new device drivers for my sound card. However, I uninstalled and then reinstalled the older drivers, but I'm still getting crashes.

Less than a week ago, Intel Storage Matrix reported that one of my disks reported a "SMART Event 0" and that my disk could fail. For the next several days, it would say the same thing every time I'd log in. I went into the settings on boot and was going to take it out of the RAID configuration, but it said I would lose all of my data, so I exited without changes. On reboot, it's magically rebuilding my RAID, with no change of hardware. Very strange.

The only other thing abnormal (other than the crashing, of course) is that my computer takes about 10 minutes to shut down, which only started after I set up my RAID 1 configuration. I've tried a number of recommendations from this forum with no help, but I did notice that the light on my DVD Driver flashes slowly (on/off) for most or all of that time. I have no idea if the two events are related.

Where am I now?

I've tested my RAM using MemTest86+. This is what I experienced:

RUN 1:All 4 modules in motherboard, no changes
Let it run for over 3 hours
Through 1 iteration (1 pass), it reporte... Read more

A:BSOD Random (almost) Daily Crashes - Tested RAM, what else?

Problem Devices:
Code:
GIGABYTE GBB36X Controller PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&2B25BDF6&0&01E3 This device cannot start.
VMware Bridge Protocol ROOT\LEGACY_VMNETBRIDGE\0000 This device is not present, is not working properly, or does not have all its drivers installed.
VMware Network Application Interface ROOT\LEGACY_VMNETUSERIF\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Creative AC3 Software Decoder ROOT\LEGACY_CTAC32K\0000 This device is not present, is not working properly, or does not have all its drivers installed.

Security Software:
Code:
"C:\Program Files\Alwil Software\Avast5\avastUI.exe"


Code:

Loading Dump File [D:\Kingston\BSODDmpFiles\thephatp\Windows_NT6_BSOD_jcgriff2\032112-61729-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`03254000 PsLoadedModuleList = 0xfffff800`03498650
Debug session time: Wed Mar 21 16:02:11.906 2012 (UTC - 6:00)
System Uptime: 1 days 18:45:50.393
Loading Kernel Symbols
...............................................................
...................................... Read more

Read other 7 answers
RELEVANCY SCORE 75.6

HP XW8200 Workstation
Win7 Ultimate x64
Recently purchase system 2nd hand
New Installation of OS
2 x 80GB IDE HDD

Tried to upload bsod zip files but get invalid file error?

==================================================
Dump File : 050312-44687-01.dmp
Crash Time : 03/05/2012 12:38:42
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x0000007f
Parameter 1 : 00000000`00000008
Parameter 2 : 00000000`80050031
Parameter 3 : 00000000`000006f8
Parameter 4 : fffff800`02a9cb6c
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+71f00
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : x64
Crash Address : ntoskrnl.exe+71f00
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\050312-44687-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 7600
Dump File Size : 275,560
==================================================
==================================================
Dump File : 050312-44890-01.dmp
Crash Time : 03/05/2012 11:33:28
Bug Check String : APC_INDEX_MISMATCH
Bug Check Code : 0x00000001
Parameter 1 : 00000000`76ff060a
Parameter 2 : 00000000`00000000
Parameter 3 : 00000000`00010000
Parameter 4 :... Read more

A:BSOD occours at random several times daily.

The above .dmp reports indicate a hard disk problem; you may have hard disk errors, data corruption, bad/corrupted drivers, a bad connection between the hard disk and motherboard, etc.. It is difficult to ascertain exactly what the problem is without the full reports. Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with those reports.

Read other 9 answers
RELEVANCY SCORE 75.6

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? no
- an OEM or full retail version? full retail

- What is the age of system (hardware)? 4 years
- What is the age of OS installation (have you re-installed the OS?) 3 months

A:BSOD occuring daily at random times

HP printer drivers/software looks to be causing some trouble. That or your super outdated Nvidia chipset drivers (2009). Please go to the Compaq website and see if you can't find any updates for your motherboard/chipset drivers as well as BIOS. In addition, you'll want to update your HP drivers and software as well.

I noticed this is causing commotion because you're using a parallel port to hook up to your printer instead of a USB. Are you not able to hook up via USB? There's nothing entirely wrong with parallel, but it's quickly being phased out of consumer market and there's more and more support for the USB side. If you can switch to USB connection that might be preferable.

Just so you know, this diagnosis is only partial. I cannot ascertain exact cause unless you turn on Driver Verifier, or provide a kernel dump (MEMORY.DMP in Windows directory). If you choose to turn on DV, do not select the following checks: Force Pending I/O Requests, IRP Logging, and Low Resource Sim. Select all other checks. Make sure to restart system after you finish setup. If you experience a boot loop afterwards, go into Safe Mode by pressing F8 prior to Windows logo and disable DV there. Provide us any new crashdumps.

Read other 1 answers
RELEVANCY SCORE 75.6

Most of this computer was left over from last build. About a year ago I got the new main board and APU. I started getting random BSOD errors. On reboot I would get an error saying I have no boot drive. BIOS showing two random drives out of 5+. I would move SATA ports around, leave some unplugged, reset CMOS sometimes. Changed from legacy/UEFI boot or just UEFI boot. It would be random what worked or not. So the last week now I'm starting to get this error on a daily basis, before maybe once a month. I hope I'm giving enough info on this.
UPDATE:tuns out the SSD firmware was bad, this issue has been fixed.

A:BSOD Random and starting to happen daily.

I can not get a new crash dump, just sits at BSOD forever. I think its because the system dose not see the drive to even save it. Guess the issue to find is why the drive is randomly disappearing.

Info from BSOD, it wont save anything so a cam pic of the screen lol.

Read other 2 answers
RELEVANCY SCORE 75.6

My laptop has been having random BSOD for 2 months. At first, it only happens a couple times a week. It's getting worse lately. It happens pretty much every day now. Below is my dump file analysis and I also attached the minidump files. I hope someone can help me. It gets really frustrating.


Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Anh Vo\Downloads\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Machine Name:
Kernel base = 0xfffff800`03406000 PsLoadedModuleList = 0xfffff800`0364a670
Debug session time: Fri Jun 8 23:14:35.403 2012 (UTC - 7:00)
System Uptime: 0 days 0:30:24.309
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loading User Symbols

Loading unloaded module list
................
*******************************************************************************
* *
* Bugcheck An... Read more

A:Random BSOD daily on my Lenovo Y560P

win32k.sys was involved, this could point to a RAM issue.
Run some diagnostics tests:
RAM - Test with Memtest86+
Disk Check
SFC /SCANNOW Command - System File Checker

Are you using an SSD or a standard Hard Disk?

Update your Broadcom Bluetooth Software by download the latest version from your laptop's manufacturer website.

Read other 7 answers
RELEVANCY SCORE 75.6

Hi kind fellows at Eightforums...

I have a machine, 8.1 Pro, that has become unstable. It had a very similar problem a couple months ago, but updating the Nvidia driver seemed to fix.

Now that it is doing it again, I tried the same fix. I used DDU to clean the existing driver first.

I also did a LAN driver update at the same time.

This seemed to make things a bit better (less frequency of crashing). BSOD messages are always different, and most disappear before I can record them. Here are two:

Memory management
IRQL_not_less_than_or_equal

Another symptom is that my Chrome Browser tabs like to crash. A lot. Reloading the tab seems to solve the issue if only briefly.

I have some mini-dump files that appear to be associated with several applications all within the last few days, in case that helps, but they are a bit big, and unfortunately the attachment manager says they are "invalid".

Thank you for your kind help! Truly appreciated.

Ryder

DIGITALSTORM-Sat_09_17_2016_114147_10.zip

Read other answers
RELEVANCY SCORE 75.6

Over the past week or two I have been getting random BSOD's when gaming. Usually its blue screening when I quit the game or sometime if I alt tab out or in. I've been trying to figure it out for myself but I'm at a complete lose and its doing my head in. Anyway I hope I've sent all the needed information, if I've missed anything just let me know and I'll try and give all the information I can so please bear with me.

A:Random Daily BSOD (win32k.sys and ntoskrnl.exe)

Code:
fffff880`0c1517d8 fffff880`101f57a8Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x1137a8

Code:
Host Name: ZOIDY-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Zoidy
Registered Organization:
Product ID: 00426-OEM-8992662-00006
Original Install Date: 18/09/2011, 1:07:44 a.m.
System Boot Time: 8/02/2014, 12:29:43 p.m.
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z68X-UD3R-B3
WinDBG points to a video display driver issue -- you can try updating the driver -- but I think there are deeper issues.

Do the following please:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

Read other 1 answers
RELEVANCY SCORE 75.6

A PC built for my sister's beauty salon is having daily BSOD errors.

Using BlueScreenViewer to view the dump files, I get the following:
- DRIVER_POWER_STATE_FAILURE - ntoskml.exe
- DRIVER_IRQL_NOT_LESS_OR_EQUAL - anodlwfx.sys & ntoskml.exe

The experts on this forum seems to be able to get "finer" detail from the dump files than the error messages above. After doing some research, I decided to install and use WinDbg. However, I can't seem to get the "symbol path" working correctly. The error message I got is as follows:






Quote:
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8008a8eb30, fffff80000b9c3d8, fffffa80075d0a80}

*** WARNING: Unable to verify timestamp for ftdibus.sys
*** ERROR: Module load completed but symbols could not be loaded for ftdibus.sys
Probably caused by : ftdibus.sys

Followup: MachineOwner


Am I going down the right path? Is the problem caused by ftdibus.sys?

Attached below are the dump files.

A:BSOD - random daily - DRIVER_POWER_STATE_FAILURE - ntoskml.exe

The BSOD is caused by FTDIBUS Serial Device Driver.

Code:
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8008f90070 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\drivers\ftser2k.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftser2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ftser2k.sys
\Driver\FTSER2K
Args: 00015400 00000001 00000003 00000003
[ 16, 2] 0 e1 fffffa8008aa1870 00000000 00000000-00000000 pending
\Driver\Serenum
Args: 00015400 00000001 00000003 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8009858e50

Args: 00000000 00000000 00000000 00000000
It keeps the Serial Port Enumerator pending.

And the driver is too old.

Code:
fffff880`05961000 fffff880`0597a000 ftser2k T (no symbols)
Loaded symbol image file: ftser2k.sys
Image path: \SystemRoot\system32\drivers\ftser2k.sys
Image name: ftser2k.sys
Timestamp: Thu Oct 22 20:39:05 2009 (4AE07591)
CheckSum: 0001DDAA
ImageSize: 00019000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from FTDI Drivers.

Let us know the results. For any further BSODs, post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers
RELEVANCY SCORE 75.6

This is a 2 year old machine that has been running well. I can't think of anything major that is new other than installing Office 2013 about 2 weeks ago. Typically BSOD occurs when I'm away from the machine rather than during specific activity. Not seeing other error messages and no performance issues.

Help is truly appreciated.

Thank you

A:BSOD random daily past 4 days

Hi dockramer.

This is a network related issue.

Code:
BugCheck 139, {3, ffffd000208ba440, ffffd000208ba398, 0}

Probably caused by : NETIO.SYS ( NETIO!NsiGetParameterEx+21c )

Followup: MachineOwner
---------
I cannot see any driver is available for your Marvel Yukon network adapter in Motherboards - P6X58D Premium - ASUS

Attachment 336369

In this situation I would prefer to use windows 7 with that board.

But if you think to continue with 8.1, better you post in BSOD Crashes and Debugging - Windows 8 Forums .... the regular 8.1 users might have a better idea.

Read other 3 answers
RELEVANCY SCORE 75.6

I have a customer running an intel based Windows 7 Pro x86 system with 6gb of memory. Onboard video and no attached peripheral devices. Standard usb mouse and keyboard.
Over the past month he has been getting BSOD at least once per week, and more recently it has become daily. Each time the BSOD is a different message in the dmp file.
I have loaded all the latest drivers from the manufacturer and from intel directly as well. The BIOS has also been updated to the latest. McAfee AV was installed until yesterday when I removed it.
Upon first boot this morning from a cold start, I received a BSOD showing 0x0000007f

Attached are all the files from the SF Diagnostic.

Please help me out

A:Random Daily BSOD latest is APC_INDEX_MISMATCH

ROLSEN74, An APC index mismatch bugcheck is a very rare one. As far as I have noticed, it is caused by a third party security program, and removing them usually solves the issue.


Code:
96e1f29c 8b7ba998Unable to load image \SystemRoot\system32\drivers\mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0x64998
You have McAfee installed, which is a very common and widely found cause of BSODs. If it is present in the system, it make a lot of troubles. Not only BSOD, but also network troubles and a lot. Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 8 answers
RELEVANCY SCORE 75.6

Hello, I have tried everything I can think of and would reallly love some help..

INFO
=====
Just built computer and BSOD happens at least once a day now. Seems to be random errors when it happens. I am running a Gigabyte 970A-D3 motherboard , 1100T Black edition CPU , 4 Sticks of ram 16gig total, SSD 120gb, HD (used to store files on) 2 TB internal , USB 500g external HD, PCI Express Nvidia geForce GTX 560 video card, PCI cheap video card i use for connecting my cable tv into. 700 W power supply. 2 twelve inch fans, 2 smaller fans. PCI USB 3.0 Header.


WHAT I TRIED
============
-- I Ran memtest and it passed 100% 9 times.
-- Did Check disk, though i think it only did it on the C drive (my SSD) Not sure if it auto does all the disk or if i have to enter a new command?
-- I check for updated drivers on everything (videocards, SSD, USB header, Motherboard)
-- I ran the intel SSD check program 3 times each time it passed 100%. 2 were long test 1 was a short test.
--I been threw an AntiVirus check (MiniToolBox , MalwareBytes, TDSSKiller.exe, ESET OnlineScan and aswMBR) Found NO issues
--Ran speed test to get some data..

The temp according to speedfan, is
GPU=33C
Temp1=30C
Temp2=40C
Temp3=45C
HD1=30C
Core=34C

and according to speedfan my voltages are

Vcore1 = 1.25v
Vcore2 = 1.46V
+3.3v = 3.36v
+5b = 4.95V
+12v = 12.54V
-12V = -9.33V
-5v = 4.05V (yes positivie not neg)
+5v = 3.58v
Vbat = 3.18v


If there is anything you can do o... Read more

A:Daily BSOD Windows 7 random reasons can't fix!

"2 twelve inch fans"

Do you realize just how big 12 inches is, in fan size?. A 12" fan would almost take up an entire side of my full tower case. Don't you mean 120mm? Your minidumps only show general Windows instability... Are you over-clocking? Try raising or the memory voltage (VCC) in the bios, a notch or two. The 1.46v is too low. Bring it up to 1.6 or even 1.8v. The minus 5 volt reading is irrelevant. -5volts is no longer used
 

Read other 3 answers
RELEVANCY SCORE 74.8

I believe it has something to do with either a driver from an XBox receiver or possibly Daemon Tools Lite (I've re-installed both) but I suppose there's no way to be sure without analyzing the .dmp file. Unfortunately I cannot install the windows debugging tools (it errors out every time). Any help would be greatly appreciated.

A:Random BSOD occuring almost daily even after I re-installed Windows

Welcome

Please uninstall daemon tools - it is a known cause of blue screens
Please replace bit defender with Microsoft Security Essentials - Free Antivirus for Windows

Observe your computer and let us know if you're getting more bsods

Read other 9 answers
RELEVANCY SCORE 74.8

Hi,

My computer has a rather strange problem: it will crash with a BSOD the first time it is started after being off for more than a few minutes.
For example, if my computer was off overnight, within a few hours of being turned on it will crash with a seemingly random BSOD (different error message each time). Prior to the crash I can notice audio stutter and crackling, as well as somewhat choppy video in games despite fps readings being fine.

My approach up until now has simply been to restart the computer immediately after it starts for the first time each day (or when I notice the audio/video stutter), which almost always prevents the system from crashing.

I suspect the problem is a hardware fault with either the PSU, motherboard or memory, but I have no idea how to confirm my suspicions.

Any ideas?

Thanks!

A:Daily BSOD, seemingly random error messages

1, Upload your MSINFO32.nfo

2, You have a couple of dumps with Bugcheck 124:

Error Type : Micro-Architectural Error
Error : Internal timer (Proc 0 Bank 5)

Check your CPU temperature (use Speccy - save & upload a snapshot here (File|Save Snapshot))

3, Uninstall Daemon Tools

4, Uninstall AVG and replace it with Microsoft Security Essentials

5, Run Memtest86

Read other 1 answers
RELEVANCY SCORE 74.8

I have an ASUS n80vn laptop that is about 3 years old. It came with OEM Windows Vista, but I installed my own copy of Windows 7 Professional 64bit more than two years ago, and there was no problem upon installation.

Lately (for about a month), I have been receiving BSOD either during boot or the log-in screen. The BSOD usually happens only once per day, and I would be forced to restart my computer. No BSOD upon restart. I suspect the problem occurs when the laptop is cold. I have attached the BSOD Dump files collected over the past month.

The only driver change I've had was nVidia graphic driver updates. I've uninstalled and reinstalled the two most recent drivers and the BSOD problem still occurs.

On a side note, I have been getting random freeze-ups too, and this has been happening before the BSOD problem. These freezes occur when I'm doing regular tasks such as web browsing or typing in Word/Excel etc. When my system freezes, there is no BSOD, but nothing can be moved (keyboard + mouse won't do anything). Closing lid does nothing too. Strangely, I have not been getting this kind of freezes when I play games.

I am having a hard time pinpointing the source of the problems. Any assistance is much appreciated.

Quick rundown of specs:
-Windows 7 Professional 64bit (retail)
-Age of hardware: ~3 years
-Age of OS: ~2
-Processor: Intel core duo P8600 2.40 GHz
-RAM: 4GB
-GPU: GeForce 9650m GT

A:Daily BSOD on cold boots & random freezes

Hi.

You have both avast and comodo internet security installed in your system.

Remove them both.

Download,install and use Microsoft Security Essentials with windows firewall.

Finish with this and post back.

Read other 3 answers
RELEVANCY SCORE 74.8

I have been experiencing an random intermittent BSOD. I once was able to track it to the adobeflash player and disabling it seemed to improve things. However, the web without adobe flash is not as useful. I was hoping someone could give me a better analysis of what is going wrong.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8000333041F
BCP3: FFFFF8800AD95AF0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Thank You!

A:Random BSOD occurring almost daily, error 0x0000003b

Hello Mayega,

From the one dump in the zip you attached it shows that Avast! antivirus is causing the BSOD for you.

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Usra\Downloads\SF_02-04-2014\SF_02-04-2014\040214-28438-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`0301e000 PsLoadedModuleList = 0xfffff800`032616d0
Debug session time: Wed Apr 2 16:37:05.332 2014 (UTC + 6:00)
System Uptime: 1 days 0:10:07.800
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
..................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 2 answers
RELEVANCY SCORE 74.8

Hi folks. Signed up to the forum specifically to ask about this problem I'm having with my 2-month old laptop.

It's an Acer Aspire V3-471G. Full specs are on my system specs page.

Basically, I've been experiencing a combination of BSOD and System Freeze/Crash problems several times on a daily basis over the past few weeks.

The first time experienced the BSOD was around three weeks after buying this laptop. I just shrugged it off as a fluke at first, but then it started becoming more frequent and now the system also just freezes out of the blue.

I haven't identified a specific pattern when it encounters a BSOD and when the system freezes. The closest to a pattern that I can identify is that every morning when I wake up, I wake up to my laptop already having the BSOD.

Totally clueless here. I've attached the zip file of my diagnostic logs so that maybe one of you gurus out there can tell me what you think is going wrong with my system.

Rest assured, when I wake up tomorrow, my laptop will have the BSOD again if I leave it open.

A:Random BSOD and System Freeze several times daily

Welcome,

While we wait for a BSOD analyst to help out further, it might help if you can check your system for corruptions.

Can you run a sfc /scannow from an elevated command prompt, and report back what it finds?

SFC /SCANNOW Command - System File Checker

Regards,
Golden

Read other 9 answers