Over 1 million tech questions and answers.

6935 dolby drivers

Q: 6935 dolby drivers

hi everyone,this is my first post! i installed windows 7 on my acer aspire 6935 notebook! everything is working fine till now,just the speaker! it is fine too but it does not sound the same as when it was on vista,it was loud and of great quality!on windows 7,the sound is very low and it really sucks,this is probably because i dont have the dolby software or drivers.. acer aspire 6935 comes with
Optimized 2nd Generation Dolby Home Theater? audio enhancement, featuring Dolby? Digital, Dolby? Digital Live, Dolby? Pro Logic? IIx, Dolby? Headphone, Dolby? Natural Bass and Dolby? Sound Space Expander technologies
Two built-in stereo speakers and one Acer Tuba CineBass booster supporting low-frequency effects
True5.1-channel surround sound output
and i dont have any of them! can someone please tell me where to download all these? please! even if it is not drivers from windows 7,please tell me where to download them

RELEVANCY SCORE 200
Preferred Solution: 6935 dolby drivers

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: 6935 dolby drivers

Hi there avishaan and welcome to Seven Forums.

Not sure, but perhaps you'll find your drivers here: Acer Aspire 6935 / 3935G Windows 7 Drivers | Laptop Software

The problem seems to be that the dolby drivers are bundeled with their software. So your best bet would be contacting Acer directly
-DG

Read other 3 answers
RELEVANCY SCORE 52.4

At Lenovo's suggestion I reformatted my hard drive and installed a clean version of Windows 10 (V 1709) and have lost the Dolby drivers.  I checked the systems ?Drivers & Software? site and there is only the original Realtek Audio Driver for Windows 10 (64-bit) - ThinkPad X260, T460 drivers;and to pay $60 (plus) for Lenovo software support to tell me where the drivers are located seems a bit ridiculous.  Given the harddrive was reformatted I no longer have the original Drivers directory.  Although I have the factory reset USB drive, but really don't want to go back to the original windows.  I would think the drives are somewhere within Lenovo?s web site.

Read other answers
RELEVANCY SCORE 52

The 2018 Anniversary Update for Windows 10 has finished installing. There were no obvious bugs or errors, until I checked the audio. My Dolby Audio won't open or better yet can't function properly. See attached picture. After getting used to the rich and optimised audio provided by the pre-installed Dolby Audio in my laptop, I can't seem to get the drivers back or look for the drivers themselves. Dolby recommends me to look towards my laptop manufacturer which is here but I still can't find the drivers. My worst option is to start a "clean" installation that causes me to re-install all my apps. I have a slow internet connection and it pains me to know that I won't be able to hear that crisp sound that Dolby Audio used to deliver in my laptop. . I hope someone can help with this. Edition: Windows 10 Home Single LanguageVersion: 1803Installed on: 11/05/2018OS Build: 17134.448Serial Number: PF0NSU9XThe error once I open Dolby Audio from the tray. 

Read other answers
RELEVANCY SCORE 52

Looking for drivers to reinstall Dolby Home Theater v4 for Windows 10 for my Aspire M581 laptop

Read other answers
RELEVANCY SCORE 51.2

I am running Win 7 ultimate on an Acer aspire 6935 with Crucial SSD drive. It has suddenly developed a very strange problem. If the computer is idle is spontaneously reboots to the "windows didnt shut down properly"error message, can happen after 5 minutes or 50 minutes. I start windows normally and everything is OK again. until the next time. However if I leave the computer with a game running it does not reboot at all. even after 2-3 days, as soon as I stop the game and leave it with nothing running on screen the problem returns.
If I run whocrashed.exe it mentions netw5s64.sys intel wifi link driver as causing the problm. I have updated this driver but the problem persists.
Any thoughts appreciated.
 

A:Acer Aspire 6935 Win 7 wierd problem

Read other 11 answers
RELEVANCY SCORE 50.8

I have been upgrading some Lenovo laptops recently to Windows 10. Mainly Thinkpad E531 and E545. Each time I upgrade one, it reboots saying: Unable to start the Dolby Audio driver. Please restart the computer or reinstall the driver if the problem persists." Restarting the laptop does NOT solve the problem. Reinstalling the driver does NOT solve the problem. Unstalling the Conexant 20671 and drivers via Device Manager does NOT solve the problem. Uninstalling the Dolby drivers does not work, either through Settings>System>Apps and Features or through Control Panel. Nor does reinstalling the driver after that. (Although, to be honest I am not sure i am installing the correct driver as I cannot find one for Windows 10 on the Lenovo site.) I tried searching for Dolby is the C: drive search bar for a Dolby.msi (as per this posting https://forums.lenovo.com/t5/ThinkPad-11e-Windows-E-and-Edge/Dolby-advanced-problem-with-E531/td-p/1... ) but couldn't find one in the search results. Whilst it is easy to click OK on the error box, it is annoying when it is day after day after day after day etc etc etc. Can someone please help? This is ridiculous.

A:Unable to start Dolby Audio Drivers error message

Absolutely no help whatsoever?? Wow. Thanks everyone, says I, sarcastically.

Read other 1 answers
RELEVANCY SCORE 50.4

Hello everyone, this is my first post here. I looked around this website and I found that the people in here are very kind. Anyway, I installed Windows 8.1 Professional onto my Acer Aspire 6935g and I found a few problems:

- The brightness does not change at all wether I press FN and Right or Left, or do it from Windows 8. It doesn't change.

- The sound and bass sounds perfect after installing drivers but every now and then it fuzzes, so for instance, when an error appears, it makes a "fzzzzzz" sound and it's annoying. (I did something to it and it might be working fine now, I have to wait and see.)

Those are the problems I am having at the moment, I have to wait and see if I get more problems on Windows 8. I have it dual-booted with Windows 7 just in case if anything goes wrong and thank lord I did. I am typing this in Windows 7 right now because Windows 8 is having some problems. Please can anyone help?

- Ikram232

P.S, sorry if I posted this in the wrong category. I did not know which one to put it in!

A:Acer Aspire 6935 upgrade to Windows 8, having a few issues

Can anyone help? I having been waiting a while now.

Read other 12 answers
RELEVANCY SCORE 49.6

Hi,I'm now using Ideapad Z510. After upgraded to Windows 8.1. I'd went to the Lenovo website searching for new driver update.But, after i install the "Realtek Audio Driver 6.0.1.7023", the "Dolby Home Theater V4" is not running(audio sound not playing through).And, the "Dolby Digital Plus" is running instead of "Dolby Home Theater V4".Then, when I try to reinstall the older version "Realtek Audio Driver 6.0.1.6954" from Lenovo website, the "Dolby Home Theater V4" is running again.Truly, the "Dolby Digital Plus"'s sound is crisper and louder than "Dolby Home Theater V4". But the sound of "Dolby Home Theater V4" has more bass and more function (like Graphic Equalizer, more Intelligent Equalizer etc.).Is this an update or what?What should I choose?The newer driver (for Windows 8.1) or older driver (for Dolby Home Theater V4)?  Thanks. (confused now) @@

A:Dolby Home Theater V4 changed to Dolby Digital Plus after Realtek Audio Driver update Windows 8.1

I only installed audio driver ver. 6.0.1.6798 which includes Dolby Home Theater V4. Since no issues are encountered I have not updated to the latest version for my unit (ver. 6.0.1.7027). Does this Dolby Digital Plus mentioned by you better than V4 in some aspect aside from the ones that you already stated?

Read other 9 answers
RELEVANCY SCORE 49.6

Hi Guys,
 
I recently upgraded a W520 to Windows 10 with the Dolby HT installed. Of course it no longer works and the audio is horrible again, especially from the internal microphones.
 
Has anyone come up with a way to install the Dolby Digital Plus on the Conexant based systems? I really need the improved audio for my softphone ASAP.
 
Thanks.
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity
                   Moved posting to the correct Thinkpad forum










Solved!
Go to Solution.

A:(W520) Dolby Home Theater V4 changed to Dolby Digi...

Any suggestions? :-) Thanks

Read other 9 answers
RELEVANCY SCORE 49.2

I nave a inspiron 7720 with dell audio installed. However after recent creators update i have access to dolby for headphones .  i was wondering whether combination of both softwares would damage laptop or earphone speakers?

A:Is it safe to use dolby access windows 10 feature with dell audio drivers? will it affect speakers ?

For best results, I would try to use only one or the other at a time, i.e. disable as much of the Dell Audio processing as possible when using Dolby Access and vice versa.  But even if you didn't do that, it wouldn't be "unsafe" to have both. The main use case for Dolby Access seems to be in order to transmit Atmos audio, though. That can only be sent as a bitstream audio signal on HDMI to an AV receiver that is capable of decoding Atmos, and Dell Audio's processing wouldn't affect a bitstream signal at all.

Read other 1 answers
RELEVANCY SCORE 49.2

I upgraded to Windows 10 last night and I've been having problems with Dolby sound since then, I've reinstalled multiple times and followed all advice I've found on here, but my problems are currently:If I turn on Dolby Digital Plus in Sound > Playback > Properties > Dolby, after a song, or any audio has finished playing (goes idle) it will turn itself back offDolby Home Theater (with the equaliser, etc) doesn't work at all, the spectral visualiser at the top of the application remains blank all the time, turning it on and off or changing settings in it does nothingI've tried lots of different methods to fix this, and I'm currently using the latest Realtek/Dolby sound driver from the acer support site (6.0.1.7040 for Windows 8.1).  I'm using an Acer Aspire V3-571G, Windows 10 x64. I'd be grateful of any support.










Solved!
Go to Solution.

A:Dolby Home Theater/Dolby Digital Plus not working

Dolby Digital Plus has miraculously started working, though it looks very different to the last time I used it (it used to be a lot smaller and said Home Theater rather than Digital Plus) but its better than nothing.












View solution in original post

Read other 10 answers
RELEVANCY SCORE 49.2

hello sir                         previously i have instaled dolby advance driver v2 but when i tried to install dolby home theater v4 the new vesion. for that i unistall the older  one now i'm unable to install any of the driver                          when i try to install dolby home theare or dolby advance v2 there's error like  " need to install PCEE frist "                           and when i try to install PCEE the setup end with peramuterly                            help me APSP   ty     










Solved!
View Solution.

A:dolby advance v2 and dolby home theater v4 driver

Hi @iiiiirahuliii,  Welcome to the HP Forums!It is a terrific place to find answers and suggestions!For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More  I grasp you are having an issue with the installation of the Dolby home theater V4.  You were able to uninstall the old driver but not install the updated driver. As Dolby does not have drivers, I am assuming you are trying to update a driver from the HP website. Dolby Home Theater v4  Here is a link to the software and driver page for your notebook.   HP 15-d103tx Notebook PC Software and Drivers You can use the Check Now option to have it auto detect any applicable software and drivers for your system. Please verify that you have the Cyberlink PowerDVD and Power Media Player Software installed. I did note that you got the message you need to install PCEE first but the installation fails. Here is a link from the WindowsSevenForum that may help.  "PCEE needs to be installed" when trying to enable Dolby Home Theater.  If that does not work I would try a HP PCs - Refresh Your PC to Resolve Problems (Windows 8) When I checked the specifications for your notebook I noticed that it came with Free Dos. HP 15-d103tx Notebook PC - Product Specifications Have you done all your Windows updates? If none of the above has helped, I suggest... Read more

Read other 7 answers
RELEVANCY SCORE 49.2

I upgraded to Windows 10 last night and I've been having problems with Dolby sound since then, I've reinstalled multiple times and followed all advice I've found on here, but my problems are currently:If I turn on Dolby Digital Plus in Sound > Playback > Properties > Dolby, after a song, or any audio has finished playing (goes idle) it will turn itself back offDolby Home Theater (with the equaliser, etc) doesn't work at all, the spectral visualiser at the top of the application remains blank all the time, turning it on and off or changing settings in it does nothingI've tried lots of different methods to fix this, and I'm currently using the latest Realtek/Dolby sound driver from the acer support site (6.0.1.7040 for Windows 8.1).  I'm using an Acer Aspire V3-571G, Windows 10 x64. I'd be grateful of any support.











Solved!
Go to Solution.

A:Dolby Home Theater/Dolby Digital Plus not working

Dolby Digital Plus has miraculously started working, though it looks very different to the last time I used it (it used to be a lot smaller and said Home Theater rather than Digital Plus) but its better than nothing.













View solution in original post

Read other 10 answers
RELEVANCY SCORE 48.4

Hello, I'm using Lenovo Z50-70 with Windows 10 and since the new audio driver, Dolby Home Theater v4 had been replaced with Dolby Digital Plus. I honestly don't like the sound of Dolby Digital Plus and I would like to replace it with the older version for the quality of sound. On the Lenovo site doesn't provide old driver versions and I was looking, but I did not find one.I would be grateful if someone helps me. 

A:How to replace Dolby digital Plus with Dolby Home ...

The best option is to revert to an earlier date using system restore.This is what i found, different model, but it may workhttp://support.lenovo.com/gr/el/downloads/ds027444

Read other 1 answers
RELEVANCY SCORE 34.4

Is there a way to completely remove Dobly and Dolby digital theater from my system. I really don't like Dolby and I dont see why I have to be forced to use it. Every time I try to uninstall the realtek driver it just installes again with Dolby. Dolby doesn't show anywhere in the "Uninstall apps and features" and it has no folder for it. Am I just stuck with Dolby forever? Thanks in advance.

A:How to get rid of Dolby

You might try changing the driver from RealTek to the built in High Definition Audio Device driver that comes with Windows.    It may lack some features, but it will play sounds just fine. Right-click on StartSelect "Device Manager"Locate "Sound, video and Game Controllers", and then left click to expand that sectionRight-click on your Realtek device and select "Update Driver"Select "Browse my computer for driver software"Select "Let me pick from a list of available drivers on my computer"Select "High Definition Audio Device" and then click Next Good luck,  

Read other 1 answers
RELEVANCY SCORE 34.4

Hello, I have installed my P50 with Windows 10 Pro. Could you help me which version of Dolby is the best for P50 and where to download it ? I could not find it on the p50 support page. Thanks.










Solved!
Go to Solution.

A:Dolby for P50

Isn't the Dolby software bundled into the Realtek Audio installer, along with the Realtek driver?  When you install the audio driver, don't you just also automatically get Dolby installed as well?

Read other 5 answers
RELEVANCY SCORE 34

?????? dolby ?? ???? ??? ????? ?????? ????? 2018 ??? ??? ?????? ??? ??? ????????? ????? ??

Read other answers
RELEVANCY SCORE 34

Hi I have hooked up my 5.1 surround sound system and been running pritty good but Im not sure if all the speakers are working is there a program i can use to see?
thanks
 

A:5.1 dolby digital PC

open your sound manager & set it to 5.1 ch,then
check the "speaker test".

click each speaker image & you should hear the
sound coming from them (sub/center,front L/R,rear L/R).
 

Read other 5 answers
RELEVANCY SCORE 34

I have upgrade my HDD by SDD and reinstall Windows 10 and manually install Realtek driver Lenovo download but Dolby digital plus app not work? Model Yoga 500 15 IBD

Read other answers
RELEVANCY SCORE 34

I recovery Notebook and lost Dolby digital plus i search official site: http://pcsupport.lenovo.com/bo/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-8... only realtek in this site. Where go i find Dolby Digital Plus? 

Read other answers
RELEVANCY SCORE 34

I made a rather long post earlier today and got no response, so let me try something a little simpler.

I do not have a DVD Player in my computer. Just a cd player. I have a 4 channel sound card (Aureal A3D Vortex) And I want to hear Dolby sound on my video games. How can I do this? Is it possible without a DVD Player? Do the games even support it?

I am trying to play
Star Wars: Jedi Academy
Soldier Of Fortune II

Thanks.

Also, If It IS Possible to have full dolby 5.1 for these games, is there a small software app I can d/l that will TEST my dolby for me?

Thanks again
 

A:Dolby Question

oops wrong thread
 

Read other 1 answers
RELEVANCY SCORE 34

Dolby Digital Plus isn't saving my setting, so every time I boot I have to set it back to Music.
it used to be fine, but since a reinstall of the program it always defaults back to voice.
anyway to get it to stop defaulting back to voice at boot up.
anyone know the reg setting for the defaults
thanks

Read other answers
RELEVANCY SCORE 34

Previously, audio could be enhanced with Dolby through Lenovo Companion, and there were different presets for music, movies, game, and voice. A round of recent Lenovo updates, after I installed the fall creators update, caused it to dissapear. I know some people on Reddit have had this same issue. Is there a way to get it back? 

Read other answers
RELEVANCY SCORE 34

How do you burn a movie to dvd that is set to automcatically play in 5.1 dolby to stereo sound ? Its fine when im on the computer to change the device to stereo jus when I burn a movie to dvd I cant chnage it on the dvd player. I use Cyberlink Power Producer
 

A:Dolby 5.1 to Stereo

Why would you want, or need to do this?
 

Read other 3 answers
RELEVANCY SCORE 34

ok,
I posted earlier I will simplify my post can your computer be used as a dolby decoder for surround sound ?
any help please.
 

A:dolby decoder

It may be possible with the correct software and if your wallet is fat enough ...

http://www.dolby.com/professional/products/pro-audio/mastering-dvd-hd/dolby-media-decoder.html
 

Read other 2 answers
RELEVANCY SCORE 34

Hello guys,  how to get dolby in my pc, because i dont have it, please help me, i need dolby...

Read other answers
RELEVANCY SCORE 34

Needed Dolby Sound Driver

Read other answers
RELEVANCY SCORE 34

For some reason, since today, my Dolby sound periodically turns itself off. I try to turn it back on again from the Lenovo Settings, and it will stay on briefly, and then go off later. I even updated the sound driver in Device Manager, did that and restarted, and its still doing it. What's going on?

Read other answers
RELEVANCY SCORE 34

Hi, need Dolby Digital Plus driver download Link please.............

A:Dolby Digital Plus

Hi, Please try Realtek High-Definition (HD) Audio Driver for your machine:    http://ftp.hp.com/pub/softpaq/sp71001-71500/sp71190.exe Regards.

Read other 1 answers
RELEVANCY SCORE 33.6

my dolby digital plus stopped working...keeps saying could not start cause of driver and to reset computer to fix issue. restarted computer but still get same error message. what can i do to fix this. my comp is acer all in one zc-606

A:dolby digital plus not working

Hello unhappy55,
 
Try reinstalling the Audio driver for your unit from the Drivers and Manuals page.




Recuerda marcar los comentarios que solucionan tu inconveniente como Aceptar como solucin. Esto ayuda a otros usuarios a encontrar la solucin con ms facilidad. Haz clic en este icono para dar un Kudos a otros usuarios por su esfuerzoRemember to mark posts that resolved your issue with Accept as Solution. Use the Give Kudos button to offer a thumbs-up.

Read other 4 answers
RELEVANCY SCORE 33.6

my dolby digital plus stopped working...keeps saying could not start cause of driver and to reset computer to fix issue. restarted computer but still get same error message. what can i do to fix this. my comp is acer all in one zc-606

Read other answers
RELEVANCY SCORE 33.6

Lenovo G500 laptop;Windows 10

i upgraded to Win 10 a few days ago(from 8.1). the only problem i have is that ,every time i start up i get an onscreen message about Dolby audio driver(screenshot enclosed).
i have checked in Device Manager-all ok,no yellow alerts;i have scanned hardware/software with Lenovo solution centre-it indicates no problems;i have also scanned with Driver Alert(updated 3 drivers it highlighted).all seems ok yet this alert comes up each time i start it up.
i don't know how/where to look for specific driver if,indeed, there is a problem-laptop and Win 10 working fine otherwise.
any advice/comments would be appreciated....
 

A:Dolby audio alert

Go here and follow neokenchi's advice to resolve this issue.
 

Read other 2 answers
RELEVANCY SCORE 33.6

Hi, there happen to be some problem on my Alienware 14 Mid 2013 model concerning Dolby Home Theatre V4 ( DHT V4). My OS is Windows 7 and now I have upgraded my OS to Windows 10. All sounds work perfectly except for the DHT V4 which i managed to repair but it still did not work. Then I installed the audio driver for Windows 10 in Dell support site for Alienware 14 and it does not have the DHT V4 on it. I have tried the audio driver for Windows 8.1 and all i can find was Dolby Digital Plus which has less function than DHT V4. When I checked in the folder Windows.old in C:\ I managed to find the executable file for DHT V4 but when I clicked on it, it just wont run at all. What can I do to reinstall DHT V4 back to my Alienware 14? 

Read other answers
RELEVANCY SCORE 33.6

Hello. I have a Lenovo Y50 that was updatep from Windows 8.1 to Windows 10 and now I can't find Dolby Digital App (which allowed me to choose different audio profiles) I've downloaded and installed all drivers from here, but still can't find the app (I think I remember that app was installed alongside Audio Driver) Thanks for your help




Live to win, dare to fail...

Read other answers
RELEVANCY SCORE 33.6

My win 8 package comes stock with Dolby advanced audio. I uninstalled the IDT driver and its software from device manager to roll back to an earlier version to solve a problem.. that didnt work, so i reinstalled the original drivers and it's software as both downloaded from hHP ( see me specs) and the one I had backed up from the original install. It should not have touched the Dolby application at all but now i cant find it? I used to open it by typing in Dolby in the search but that now has no Dobly results. I tried a regedit search and It didnt even find Dolby. What THE F is going on ?

A:Lost my Dolby sound in win 8

Is your IDT file named SP59620.exe and is 44MB in size?

The description for this file says that its the driver and application, i could not find any other audio software for your system.

This is the HP link for the driver/application

HP Pavilion g7-2200 Notebook PC series*-* IDT High-Definition (HD) Audio Driver - HP Business Support Center

Read other 1 answers
RELEVANCY SCORE 33.6

Since a recent update to Windows (Win 10 Pro, X64) my Dolby has been acting wonky.  There are settings under the Lenovo Settings app to have Dolby automatically control sound levels depending on the media type, but this feature is not working with Windows Media Player in full screen mode.  If I launch WMP not maximized (so the title bar is showing across the top of the screen) then Dolby functions.  If I maximize the screen, Dolby switches off and if I exit from maximized Dolby will resume after a brief delay (about one second). Since I watch a lot of video on this machine, this is driving me a bit crazy.   I have tried switching all the options on and off in the Lenovo Settings app, and the Dolby app really doesn't have many settings other than on and off.  I have reinstalled both the Lenovo Settings and the entire Realtek sound driver app (which includes the Dolby features) but that doesn't seem to do anything.

Read other answers
RELEVANCY SCORE 33.6

G'day all.


I have just bought Unreal2003, and all over the CD's and the box it claims to have Dobly Digital content.
I have my sound card hooked up to a Home Theatre reciever that decodes this stream.

I cannot find it? where would it be? I was looking forward to listening to the game in digital. The reciever (Yamaha TSS-1) has a little light that flicks on when there is a digital stream going through it. It never comes on.

Thanks people.
 

A:Dolby Digital in games

There is no Dolby Digital in *any* games. It's only available if you're using the nForce 1/2 motherboards that support Dolby Digital Encoding. It's some odd misleading marketing thing that Dolby have going on.

As from the America's Army FAQ;

Q: What are the system requirements for Dolby Digital audio?
A: NVIDIA nForce or other motherboards/soundcards containing the Dolby Digital Interactive Content Encoder required for Dolby Digital audio.
 

Read other 10 answers
RELEVANCY SCORE 33.6

Since upgrading to Win 8.1 (from 7) I cannot get Dolby Home Theatre to load
The sound card is part of the Gigabyte GA-X58A-UD3R Revision 2 motherboard -
Realtek ALC889 codec
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for Dolby? Home Theater

I have tried loading the Realtek High Definition Audio driver 3.77 R2.72 which seems to install OK but when I then try installing the Dolby home theatre 4 GUI package it fails with a message saying PCEE needs to be installed.

Help appreciated, thanks

A:Dolby home theatre

Did it come with the computer? On my laptop I have found that I have to use the Realtek drivers supplied by the manufacturer or else DHT breaks. I think they put some additional code in to interface with the Dolby.

Read other 12 answers
RELEVANCY SCORE 33.6

I ran the app once.  It does not start againI can turn on and off the dolby feature in the speaker properties, and the dolby icon in the system tray.but when I click on the app in the tray icon, nothing happens

Read other answers
RELEVANCY SCORE 33.6

3 days ago , I Faced a problem on my Lenovo K6 note I found Dolby app stopped working and I tried to restart the phone but nothing happened I cleared the app data and uninstalled the other players like n7 player and disapled play music but still stopped !!By the way ! I acctually installed the last update and nothing solved I dont want to format the phone and do factory reset please any help !!!I want it work again without factory reset 

Read other answers
RELEVANCY SCORE 33.6

Used guide here:https://community.acer.com/t5/Windows-10/Dolby-Home-Theater-Dolby-Digital-Plus-not-working/td-p/3728... Worked great however when the mic gets turned on by something the dolby gets turned off and I have to turn it back on every time. Work around I leave teamspeak up and I only have to turn in back on every time I reboot. Had the same issue when I win 7 but I turn off enhaments like echo reductsion and it fixed it but that does not work in win 10. please help me, If no one knows how to fix than I will try contacting dolby directly my self because the default realtek driver does that have that issue. Thank You,Corey

Read other answers
RELEVANCY SCORE 33.6

I'm building a gaming system and I was wondering... what's better, 6-channel sound ($4 upgrade on mobo) or spending $33 for a 6.1 Doby Creative Labs card? If anyone has any other ideas for sound cards/sound systems, let me know.

Too, is it worth it for 6.1 or 6-channel? 6.1 speakers are massive expensive. Are they really that much better (for CS and mp3s) then say, 4.1?
thanks

tim
 

A:6-Channel Sound/5.1 Dolby

Read other 15 answers
RELEVANCY SCORE 33.6

Whenever I try to load a video, my Dolby DIgital Home Theater keeps on turning itself off whenever a new video is loaded. 

A:Why does my dolby digital keep on turning off?

dannytruong38,
 
I would recommend you reinstall the Dolby software first, to see if that fixes the issue. There are a number of thuings that could have caused this to start happening, first and foremost, Windows updates.

Read other 2 answers
RELEVANCY SCORE 33.6

Hello guys, I have been searching around about this but they always end up with a headphones that has built-in Dolby Audio. I just bought a USB Headphones and when I use it, the Dolby software always disabled. If I plug in a headset/earphone base on 3.5mm jack the software work again. Does Dolby Audio software only run on a specific hardware? anyway my laptop has built-in Dolby Advanced Audio v2 and the sound card was Conexant SmartAudio.

Along with this, there is a little more question. The headphones I bought (Dragon War Beast) is a 5.1 channel sound (said on the box & the website). But I honestly confused if it was real or not cuz in Windows Audio it only show stereo channel on Speaker Setup as well as the manual said USB 2.1 Stereo Vibrating Headset (different from the box). Is there a way I can test if its a stereo or 5.1 sound?
Thanks in advance. Any help is always apreciated, and of course sorry for my bad english

A:How can I use Dolby Audio with USB Headphones

When you use USB headsets, you bypass the PC's sound card (and add on's such as the Dolby). The USB headset has the "sound card" (conversion from digital to analog) built in.

The 5.1 is a function of the USB headset and again does use the PC sound. If the source, such as a game, is 5.1 then you will get the 5.1 (simulated) sound. Unless there are multiple speakers in the headset I don't see how it can get "real" 5.1 sound. Its like my LCD HD TV, it has two stereo speakers but simulates surround sound.

Read other 6 answers
RELEVANCY SCORE 33.6

I have just bought some YAMAHA TSS-1 speakers.
These speakers have a external amp/decoder.

I have connected the speakers, and the PC to its inputs. There are 2 digital ins, one optical and the other COAX. Since I dont have optical out in the SBLIVE 5.1, I connected this using the mini plug to RCA connection.
I have also connected the fron and rear speakers to the analoge inputs.

Now, this system works fine for games, but the real reason I bought them was for digital DVD. I get nothing but silence when I enable SP-DIF out in my software player. I can play the movie using the 4 channel option, altough that it not why I bought the speakers.

Any help, or suggestions will be GREATLY appreciated

Thanks all.
 

A:Help with External Dolby decoder

I think real S/PDIF out comes with Live!Drive.
 

Read other 3 answers
RELEVANCY SCORE 33.6
A:DOWNLOAD FOR DOLBY DRIVER 7.2.700.7

Please Notebook Model

Read other 1 answers