Over 1 million tech questions and answers.

Realtek HD Audio (Code 10)

Q: Realtek HD Audio (Code 10)

Hello,

I have no sound coming from my speakers and when I look at the device manager the "Realtek High Definition Audio" has a yellow icon with an exclamation point. When I right click and click properties it says, "This device cannot start. (Code 10)".

I have uninstalled and reinstalled the drivers several times and have even done a fresh install of Windows 7, but no luck.

Any help is much appreciated.

Thanks in advance.

Under my sound card driver hardware ID it is listed as:

HDAUDIO\FUNC_01&VEN_10EC&DEV_0887&SUBSYS_1043837B&REV_1002
HDAUDIO\FUNC_01&VEN_10EC&DEV_0887&SUBSYS_1043837B

Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
System Manufacturer: ASUSTeK Computer INC.
System Model: CM5570
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (2 CPUs), ~2.6GHz
Memory: 6144MB RAM
Available OS Memory: 6144MB RAM

RELEVANCY SCORE 200
Preferred Solution: Realtek HD Audio (Code 10)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Realtek HD Audio (Code 10)

What do you show in the Device Manager, Sound section?
Post a Screenshot of that.

Code 10 can be driver or can be some other hardware issue.
In the Device Manager, RIGHT click on the entry for the RealTek and then LEFT click "Uninstall" ALSO check the box to uninstall the drivers. Then restart the PC. If there are no hardware problems or conflicts, when Windows starts it will detect and and install the generic, basic function, "High Definition Audio Codec" for the sound driver. If this is installed, check to see if you have sound, and if the Speakers (High Definiton Audio Codec) is set as the default Audio playback device in the Control Panel/Hardware and Sound, Playback section.

If this works, you can consider reinstalling the RealTek drivers. Where did you get the drivers you have now?

Screenshots and Files - Upload and Post in Seven Forums

Read other 6 answers
RELEVANCY SCORE 71.2

Basicaly the title explain it all,can find the driver for on board audio device.
I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106
Newly instaled Windovs 7 Ultima 64bits.
Trayed few diferent drivers non of them works,so probably is audio device gone.
Any sugestions?

Read other answers
RELEVANCY SCORE 69.6

Hi,

I have several computers of differents (HP, Toshiba, etc) and It happens the same problem. The audio device has an exclamation mark in Device Manager.

I think this problem is caused by some update windows. My OS is Windows 7 Home Premium 32bits .

Does anyone know what Windows Update should be uninstalled ?

Thank You.

Read other answers
RELEVANCY SCORE 67.2

I have a HP Pavilion zv6000
amd 64 3200 +

I used the Realtek AC'97 Audio driver when I had x64 vista business and the sound worked fine.

I used the same driver with W7 and I get and error that says This device cannot start. (Code 10)

Has anyone had luck fixing this issue or had the same problem.

A:Realtek AC'97 Audio (Code 10)

i had a problem with my ac'97, not sure if that was the error code, but it was saying i had no audio installed, have you tried the lastest version from the website? i am running 6.01.6293 (16/09/2008) and after installing this version it was OK








  
Quote: Originally Posted by billdobeans


I have a HP Pavilion zv6000
amd 64 3200 +

I used the Realtek AC'97 Audio driver when I had x64 vista business and the sound worked fine.

I used the same driver with W7 and I get and error that says This device cannot start. (Code 10)

Has anyone had luck fixing this issue or had the same problem.

Read other 9 answers
RELEVANCY SCORE 67.2

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39).

So as you can see above, i have tryed everything to fix this. I get this message or the computer crashs and i have to do a system restore.

If you have any ideas i didnt think of let me know.

A:Realtek AC'97 Audio (Code 39)

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Microsoft Trusted Audio Drivers

Read other 9 answers
RELEVANCY SCORE 66.4

So, I've reinstalled my system back to XP, and installed all of the devices but it shows that there's no sound card. It shows the "code 10" problem. I've tried to reinstall the driver, and installed different updated version,but still no luck. I have attached my dxdiag, so if anyone call tell me where's my problem
 

Read other answers
RELEVANCY SCORE 66.4

I'm running windows 10 on an HP Omen and after most recent windows update, my computers internal speakers are unavailable, as are any wired connected audio devices. Sound icon says no speakers or headphones are plugged in. Device manager, under sound, video, and game controllers does not show realtek HD audio. This only appears when I go to view and select show hidden devices. Then, under properties, I can see Code 45 (hardware device not connected. To fix, reconnect). I have attempted driver fixes including driver version 6.0.1.8591. Troubleshooters for audio detected nothing. I have tried rolling back the windows update.

I cannot find any sites that recommend steps beyond checking driver for the device. I've also tried calling HP tech support twice, and both times representatives told me they needed more time to find a solution (which they have failed to do).

Anyone who has dealt with this issue or has thoughts, any advice appreciated.
 

Read other answers
RELEVANCY SCORE 66.4

Hello everyone,

Havent been here in a while so sorry if im doing something wrong, well my problem is with a Toshiba Satellite L505D-LS5005 after having an issue with freezing at start up I ran several antivirus and spyware scans and all came up negative but the freezing continued so I then was able to go into safe mode and do an MSconfig and unchecked everything booting up. That took care of the problem with the freezing and I was able to uninstall Norton and McAfee which I believe was the problem. (enabled one by one to identify the problem so far everything is playing nice no conflicts)

Soon after getting things back to normal I noticed that the audio drivers weren't working. This computer has the "High Definition Audio drivers" but it has "This device cannot start. (Code 10)" status on the drivers. I have tried the following solutions with out results:

Uninstalled drivers from the device manager and reinstalled them using the drivers from the Official Toshiba Website. After installing I restart but still no audio and the same "This device cannot start. (Code 10)" message on the status

I have also tried uninstalling all Realtek drivers such as Ethernet controller and Wireless device controller and done one by one. All other devices install and work after installation except the audio drivers.

I have also gone to Add or remove programs and uninstalled the Realtek audio drivers and reinstalled the drivers from realtek.com and still ... Read more

A:Realtek audio drivers code 10

Hi just to start of code 10 is when the wrong driver is installed so you do need to get the right driver .. toshiba is the most unreal difficult company to get drivers from they have a few sites .. not sure y but maybe someone with more experience can help there . you do need to get them from the site tho I will go and try find one for you aswell,, also not 100% sure but im quite sure you should really run 64bit on 2gig of ram that could be another problem ARE YOU IN UK OR USA
 

Read other 14 answers
RELEVANCY SCORE 65.6

Hey hello everyone, I am new member here. I already checked couple threads with this same title, but I didn't really find any solution.

Here's a thing. Yesterday I went to clean my computer for dust, so I opened case and unplugged all wires. Now everything is backup except there is no sound. In device manager I got that yellow/black '!' next to Realtek AC3'97 Audio. I reinstalled drivers couple times already, but nothing. I mean, I was just cleaning dust...

So I came up with that idea that it might be the problem with the front panel pins, which I probably connected in wrong ways. I don't even know in which way those pins should be facing when connecting. So the motherboard is Asus A8N5X (from 2005, yea old), computer runs on Windows XP SP3. I tried many combinations with those pins, but nothing. I get that yellow/black '!' next to device or I get nothing at all (it won't show the device at all).

I tried reading the manual, but the wire names are different on the actual wires than shown in the manual:

And the names on wires are:

GND (black wire)
GND (black wire)
Mic Bias (yellow)
Mic In (green)
Spkout L (red)
Spkout L (red)
Spkout R (white)
Spkout R (white)

As you can see names duplicates. So I tried various combinations, but nothing. Once looked like I fixed it, after loading Windows up, there was sound icon in the tray, but PC suddenly restarted and next time there was no audio again.

Like I said I unplugged all wires befo... Read more

A:RealTek AC'97 Audio: This device cannot start. (Code 10)

Read other 6 answers
RELEVANCY SCORE 65.6

I've seen this issue resolved on here before, and it all seems to balance on a code that is different on all computers. I accidentally uninstalled something when I clicked on the wrong line. I hit cancel as soon as I saw what I did but it was too late. I have no sound on my old POS computer Help tech support guy. Help!

I'll even send cookies to whomever helps!
 

A:RealTek AC'97 Audio: This device cannot start. (Code 10)

Read other 10 answers
RELEVANCY SCORE 65.6

Hey guys! This is my first post and I hope I can get some help!
A few days ago, I set up my desktop and installed a fresh copy of Windows XP Pro. Of course, I had to get all my drivers manually, and I did. Everything was all fine and dandy until I realised that I had no sound. so searching I went until I found the driver I needed: Realtek AC'97 Audio. So I restarted and figured I would have sound. That was not the case. So I went into Device Manager and found a black exclaimation mark in a yellow bubble on my sound driver. I right-clicked it and went to "Properties". In the text box it said: "This device cannot start. (Code 10)"! I cannot seem to fix this issue! I went to RealTek and downloaded them. I went to Asus but could not find the drivers for my model (I am not 100% certain but I think I have a Pundit-S)

System Specs:

Mainboard : Asus P4R8L
Chipset : ATI 9100 IGP
Processor : Intel Pentium 4 @ 3200MHz
Physical Memory : 2048MB (2 x 1024 DDR-SDRAM )
Video Card : RADEON 9100 IGP
Hard Disk : Seagate ST380811AS (80GB)
DVD-Rom Drive : ATAPI DVD D DH16D2P
Monitor Type : ProView Technology - 17 inches
Network Card : 3COM 3C920B-EMB-WNM Integrated Fast Ethernet Controller
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
DirectX : Version 10.00
Device Audio : ASUSTeK Computer IXP150 AC'97 Audio Controller

If this isn't enough info, please tell me so I can add to it. If anyone can help it will be DEEPLY ap... Read more

A:Solved: RealTek AC'97 Audio Error Code 10!

Read other 9 answers
RELEVANCY SCORE 65.6

Hello,

I've searched this forum, and others, and haven't found a solution for this problem.

I have no sound for anything. I have a Realtek AC'97 audio, running Windows Service Pack 3. My motherboard is an intel corporation one. My laptop is a sony vaio pcg-z1wamp.

In the Device Manager it shows the following: "Device cannot start (code 10)".

I've tried installing several new drivers; I've uninstalled and installed the device; I've tried updates and some of the solutions suggested on this forum. Nothing has worked.
Hardware issue & problem persists.


Any help would be greatly appreciated.
 

A:Realtek AC'97 audio controller, can't start (code 10)

I ran everest, see below
Motherboard:
CPU Type Mobile Intel Pentium M, 1687 MHz (17 x 99)
Motherboard Name Sony Corporation PCG-Z1WAMP(UC)
Motherboard Chipset Intel Odem i855PM
System Memory 1024 MB (PC2700 DDR SDRAM)
BIOS Type Phoenix (11/21/03)

Display:
Video Adapter MOBILITY RADEON (16 MB)
Video Adapter MOBILITY RADEON (16 MB)
3D Accelerator ATI Mobility Radeon (M6)
Monitor Plug and Play Monitor (12001)

Multimedia:
Audio Adapter Intel 82801DBM ICH4-M - AC'97 Audio Controller [B-1]
 

Read other 14 answers
RELEVANCY SCORE 64.8

Hello,

I don't know what's wrong with this.I have no sound for anything. and even when I try to stream videos in the internet, the video automatically pauses for about every 12 seconds.

I don't know what to do but I think you guys can help me.
I also have a Realtek AC'97 audio for VIA(R) audio controller. I'm running Windows XP Service Pack 3. My motherboard is VIA VT8237R plus.

I'm having the same problem:
Device cannot start( code 10)

I also tried to install that vinyl_v700b
but every time the installation starts, my conputer tends to restart. That's why I can't install that one.
what's wrong? Can you guys please tell me what to do?
thnx. I cant really watch videos nor play music files.

Thanks again.
 

A:Realtek AC'97 audio controller not working -- error (code 10)

Apart from the audio driver, it is critical to have the right chipset driver installed. The VIA southbridge needs to work properly to interface with the vinyl audio processor.
So try installing the chipset driver first, and then the audio driver. And of course make sure all MS updates are installed, including the MS UAA driver.
 

Read other 1 answers
RELEVANCY SCORE 64.8

HP Pavillion zx5000
Intel Pentium 4
3.20 GHz
1 GB RAM
Windows XP Home Edition SP 3

My friend's laptop is having trouble recognizing its sound driver (Realtek AC97). The hard drive was replaced and the operating system reinstalled a couple months ago, and ever since then it hasn't been able to play sound. Under the Device Manager, Realtek AC'97 Audio has a yellow exclamation point next to it, and under its Device Status it reads "This device cannot start. (Code 10)".

I've tried uninstalling and reinstalling the device, as well as downloading the most recent driver (the most recent I could find was 4.04), but to no avail. I'm not sure what else I can do at this point.

On other boards that I've looked at people have asked what motherboard was being used. I used Everest to find the following information under "Motherboard":

Motherboard:
CPU Type Intel Pentium 4, 3200 MHz (16 x 200)
Motherboard Name Hewlett-Packard Pavilion zx5000 (DZ313U#ABA)
Motherboard Chipset ATI Radeon 9100 IGP
System Memory 1024 MB (PC2700 DDR SDRAM)
BIOS Type Phoenix (02/16/04)
Communication Port ECP Printer Port (LPT1)
Any advice or direction would be greatly appreciated! Thanks in advance!

A:Realtek Ac97 Audio "this Device Cannot Start. (code 10)"

Hello blackberet,

This device cannot start. (Code 10) basically that there are driver problems. have you looked on HPs website for software for your specific laptop?

Read other 5 answers
RELEVANCY SCORE 64.8

Hello,

Recently, I installed this Windows XP Professional SP2 on my comp. Once done, I am not been able to install my audio drivers for Realtek High Definition Audio. I couldn't understand what the problem is. Before, they were working fine, now since I had re-installed the Windows again, the whole thing came into being. I had done reinstalling the Windows several times now.

The drivers for the device are installed. But it says the device cannot start.[Code 10].

I had done loads of things, such as :

1. Reinstalling the drivers after uninstalling the same.
2. Rebooting as appropriate.
3. Surf through different sites to check, what best I can do, to tackle the whole thing. But nothing so far.


Hopefully someone be able to tell me, what to do.....

I need my sound back, as my work is completely hung up without it.....

Thankx......

Read other answers
RELEVANCY SCORE 64.8

Hi peeps.

First time posting, so if im not doing it right i apologise.

I recently formated my pc, and re-installed windows XP pro.. installed all my drivers ect & everything was working perfect even my sound.. the next day when i switched the pc my audio device has a code 10 error?

How does that work? i dont have a virus as i did scans, i tried uninstalling and re-installing all different audio drivers even older versions, just doesnt seem to work...
Im getting sleepless nights with this nonsense .. damn digital signatures

My pc specs:
AMD 3000+
motherboard 7njl3/4
geforce 6200a
1 gig ram
120 gig hardrive.

PLEASE HELP ME.. it is so damn annoying..

thanks in advance.
 

A:Realtek ac'97 audio drive not working, error code 10

No sound?

Try the simple things first. Speakers on and working? Plug them into a MP3 player, test that they actually amplify. Speaker plug in the correct socket in the PC? ( I mean not the Mic socket?) Have you looked in 'Device Manager' for a yellow warning by the entry for your sound option? Assume you know all the above, it's most likely still to be the wrong drivers. Go into 'Device Manager' and uninstall any sound drivers. Then go to www.drivereasy.com and download their free program, scan your PC and you will get the right driver I would think. You might also find a few other drivers out of date too. And NO it doesn't cost you to use that program. Hope this helps.
 

Read other 35 answers
RELEVANCY SCORE 64

Hope someone can help me out with my audio problems...

I have an ASUS A54C laptop less than a month old.
-Windows 7, service pack 1.
64 bit.

About a week ago Asus live update automatically installed some updates (I didn't realise I could disable auto update, still getting used to this laptop)
when it restarted a few errors kept popping up and the webcam was not working. After googling I came across forum posts saying you have to manually download the drivers from the website. After doing that the webcam software showed a message "no audio device found" I thought ok, no problem I'll just re-install the audio driver (I had done this a few weeks previously because the built in mic was acting up).

The first half of installation completed, laptop restarted but then gave me the following error when trying to complete the second half:

Install Realtek HD Audio Driver Failure !!
[Error Code: 0x00000002]

Things I've already tried:
-I have tried several times to install the audio driver
-Tried installing different versions
- downloading directly from realtek
-System restore a couple times but it failed.
-Updated the BIOS (although I have no idea what this actually does)

I don't know what else to do.
Please help!
 

A:Solved: Realtek HD audio won't install [Error Code: 0x00000002]

Read other 8 answers
RELEVANCY SCORE 64

I bought a laptop from a friend and it has no sound. When I tried to find the source of the problem an error message pops up which I am sure is the root of my problem. It is Realtek AC97 audio driver error code 10. Make: emachines xp, Model number: m622-uk8x. Can someone please assist me with this issue, I would really appreciate it. Thanks in advance.
 

A:Solved: Realtek ac97 audio driver error code 10

Read other 16 answers
RELEVANCY SCORE 63.6

I can't install my audio driver after upgrading to Windows 7 Ultimate x64! I run a Lenovo Y550, my drivers can be found here. When it starts installing, an error pops up and says:Install Realtek HD Audio Driver Failure !![Error Code : -0001] Any help will be real apreciated.

A:Install Realtek HD Audio Driver Failure !! [Error Code : -0001]

try "run as admin"any error code like 0x000005g4?

Read other 9 answers
RELEVANCY SCORE 59.2

It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore Stereo Mix as each time I was told to update audio drivers I would update HD Audio Manager so what is the difference between these two Realtek ?

I installed Realtek HD Audio Driver R2.72 last night and it restored Stereo Mix which now enables me to record system sound whilst using screen recorders.

Thanks

A:Difference between Realtek HD Audio Manager & Realtek HD Audio Driver

  
Quote: Originally Posted by Swiftkidd


It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore Stereo Mix as each time I was told to update audio drivers I would update HD Audio Manager so what is the difference between these two Realtek ?

I installed Realtek HD Audio Driver R2.72 last night and it restored Stereo Mix which now enables me to record system sound whilst using screen recorders.

Thanks


Realtek HD Audio Manager is a software driver used on Windows computers. It handles recording and playback of audio programs. It is required for many audio programs to operate.

While Realtek HD Audio Drivers is a tool that allows you to listen to audio in HD on your PC.

Stereo Mix is used to transfer audio that the PC is playing to recording software such as Audacity, so that you can record what you?re hearing.

When one upgrade their OS like in your case from XP to Win7 with the same motherboard and sound card it is always advised & recommended to download the latest soundcard driver, because the only thing that had changed was the operating system.

The advice is not to go to windows for it, but to go to the motherboard manufacturer, because it would be specialised for the system rather than ... Read more

Read other 2 answers
RELEVANCY SCORE 58.4

HP Pavillion zx5000
Intel Pentium 4
3.20 GHz
1 GB RAM
Windows XP Home Edition SP3

My friend's laptop is having trouble recognizing its sound driver (Realtek AC97). The hard drive was replaced and the operating system reinstalled a couple months ago, and ever since then it hasn't been able to play sound. Under the Device Manager, Realtek AC'97 Audio has a yellow exclamation point next to it, and under its Device Status it reads "This device cannot start. (Code 10)".

I've tried uninstalling and reinstalling the device, as well as downloading the most recent driver (the most recent seems to be 4.04), but to no avail. I'm not sure what else I can do at this point.

On other boards that I've looked at people have asked what motherboard was being used. I used Everest to find the following information under "Motherboard":

Motherboard:
CPU Type Intel Pentium 4, 3200 MHz (16 x 200)
Motherboard Name Hewlett-Packard Pavilion zx5000 (DZ313U#ABA)
Motherboard Chipset ATI Radeon 9100 IGP
System Memory 1024 MB (PC2700 DDR SDRAM)
BIOS Type Phoenix (02/16/04)
Communication Port ECP Printer Port (LPT1)

Any advice or direction would be greatly appreciated! Thanks!
 

A:Realtek Ac97 Audio "this Device Cannot Start. (code 10)"

OK you probably thought of this first thing but don't laugh when I ask: after the clean install, did your friend run the motherboard disk for his machine? Because the AC97 drivers are on that cd. He should disable it in "devices' and install the driver from the mobo cd and then enable it again and reboot. Should have sound. Only other thing is it could be disabled in the bios - you could check that too.
Mini
 

Read other 2 answers
RELEVANCY SCORE 56.8

Help. I recently did a clean install of Windows 7 64bit (on my HP Vista 32 machine). Life is grand! My problems started when I tried to listen to the microphone input through my speakers. The front microphone inputs did not work so I downlaed the Realtek HD Audio Drivers (recently updated) from the realtek site. The inputs now work and I can record from the microphone through the Sound Recorder app in Accessories but can not hear the microphone through the speakers while I am recording. After searching the web I noticed a lot of chatter about setting things up in the Realtek HD Audio Manager. This app does not show up in my control panel. Does anyone know where I can get it (if I really need it). The Realtek site only has the driver download (not the manager). Am I missing something, am I confused, or both?

A:Realtek HD Audio Manager and Realtek Audio Driver

  
Quote: Originally Posted by NTexan


Help. I recently did a clean install of Windows 7 64bit (on my HP Vista 32 machine). Life is grand! My problems started when I tried to listen to the microphone input through my speakers. The front microphone inputs did not work so I downlaed the Realtek HD Audio Drivers (recently updated) from the realtek site. The inputs now work and I can record from the microphone through the Sound Recorder app in Accessories but can not hear the microphone through the speakers while I am recording. After searching the web I noticed a lot of chatter about setting things up in the Realtek HD Audio Manager. This app does not show up in my control panel. Does anyone know where I can get it (if I really need it). The Realtek site only has the driver download (not the manager). Am I missing something, am I confused, or both?



Welcome to SF!
Realtek HD Control Panel is in the Windows notification area. See image below. I hope I helped!

"PLEASE REP ANYONE WHO HELPS YOU"

Read other 7 answers
RELEVANCY SCORE 55.6

I installed the Realtek HD audio driver from the ASUS download site (P8Z68-V Pro MB) and all was well until I installed an MSI 560TI video card and let it install the Nvidia HD Audio drivers. The problem I have been chasing ever since was the Realtek HD Audio Manager popping up after the system exited extended sleep state (overnight). After much trial and tribulation and several Google Searches I concluded that the Realtek/ASUS HD Audio driver was conflicting with the Nvidia driver(s).

I did what suggested on one of the sites and that was to delete the Realtek HD Audio drivers and just let W7 install the default Microsoft drivers. Problem gone! Now I am curious, what did I give up and if I install the latest Realtek driver for W7 64-bit (v267) from the Realtek site will the Nvidia conflict return?

A:ASUS/Realtek, Latest Realtek versus default W7 Audio driver

Generally the Microsoft installed HD Audio Codec does not have all the features the motherboard vendor's sound drivers do. In most cases the actual driver is preferred and should be installed instead of the generic HD Audio Code drivers.

The NVIDIA driver is for the Video and the build in audio for HDMI audio. It should not be interferring with the PC's sound and in this case Realtek. I would uninstall the Microsoft drivers and reinstall the RealTek and see if you still have the problem. Generally a driver causes problems when exiting from sleep mode. Actually on "extended" sleep mode of overnight its really better to just shut down the system and then reboot in the morning. If you want it to be operational when you wake up, the BIOS should have an option for auto power on at whatever time you set.

Read other 3 answers
RELEVANCY SCORE 55.6

Hello all, I just got Windows 8.1 Pro as a gift from a friend and installed it just a few hours ago, and I noticed that I am having audio problems.

Basically put, it's sort of random when this happens, but it seems to happen when sounds play rapidly, as letting a audio que play it's part will play with no popping nosies, here is an example of me showing this by using the sound that plays when you change audio:
Vocaroo | Voice message

The first 10 seconds are me playing the sound slow, with no popping. Then the sound starts popping when I change volume rapidly.

I also checked DPC Latency Checker and everything is running smoothly:
imgur: the simple image sharer

I have all the latest drivers installed, and this happens with with no drivers. I just can't seem to figure out what the issue is here.

EDIT: I forgot to mention that I've tried disabling drivers, removing the USB Keyboard and Mouse, as well as setting the audio to CD Quality.

Thanks in Advance to the person who could help me with this.

A:Windows Realtek Audio Popping Problems (Realtek ALC662)

What type of speaker system are you using ? Monitor with HDMI, check video card settings ? Could be conflicting driver, possibly Video card. Also mattering to speakers used, check for loose connections, something could be disturbing speakers.

Lots of reasons for popping and stuttering. Integrated card or PCI Slot Card?

Read other 10 answers
RELEVANCY SCORE 55.6

I accidentally uninstalled realtek audio driver, and I'm now trying to reinstall it, however, I'm getting errors. 
My desktop is Inspiron 3650, and i tried to install Realtek High definition audio driver from 

Below is the installation log

[OS] : 10.0 -Build : 14393 -Service Pack : 0 -x64 system : 1 -MCE system : 0 -Server system : 0 -System Language ID : 0x0411 -User Language ID : 0x0409[Default Path] : -tcRtkTempDir : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06 -tcISSetupLocation : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06
Collecting inventory ...Checking driver version ... [Realtek Audio Driver for DELL MUP Package] MUP Package Version : 6.0.1.7908
C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RealtekHDAudio\WIN64\RTKVHD64.sys [Realtek HD Audio Driver] Installed version : 6.0.1.7707 Package version : 6.0.1.7908
Executing update ... [2017-10-24 0:36:43.15] Run Setup Command : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RealtekHDAudio\Setup.exe /z[-rpC:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RHDSetup.log]
-------- Realtek Installer response : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RHDSetup.log --------[ResponseResult]ResultCode=-1[Install Progress] Confirm Realtek Driver Check Operation System Version OS Information [WINMAJOR Number] = 10 OS Information [WINMAJOR String] = 10.0 OS Information [SYSINFO.nWinMajor... Read more

Read other answers
RELEVANCY SCORE 52.4

Recently upgraded a Dell Inspiron 3847 to an SSD and did a clean-install of Windows 7 Home-Premium x64 using Dell media. Post install, I cannot get the audio working. Device manager shows ...
Bluetooth Audio DriverHigh Definition Audio Device (yellow exclamation point)Realtek High Definition AudioI have tried the following to fix:
1. Uninstalling and deleting the driver then re-downloading using Dell Detect 2. Installing the RealTek R282 driver from the RealTek site3. Windows Update does not find the driver if it is uninstalled4. Right click on entry in device manager and letting Windows find it5. Installing it manually from the Dell siteAny help is greatly appreciated and thanks in advance.

A:No Audio Post Clean Install. Realtek Audio Driver Installed but High Definition Audio Driver fails every time?

same principle as mentioned here: en.community.dell.com/.../20027104

Read other 1 answers
RELEVANCY SCORE 51.2

Hi,
Recently, I started getting problems with my audio on my alienware X51 R2 (I'm on windows 10). After a long time of searching for solutions all over the internet like on forums, I've come to the point where the only possible solution to my problem is using the realtek hd audio manager. The problem is: I can't access it on my alienware device since it is completely replaced by your poor version of it "Alienware Audio" wich does not have any of the options I need. How could I restore the original version of this software or at least disable the alienware audio version?

Read other answers
RELEVANCY SCORE 51.2

Hi,

I finally upgraded from Windows XP to Windows 7 and almost went back shortly after finding out I could no longer organize or manually arrange my own personal files and/or folders but luckily I discovered an application called 'Folder Options X' which has re-enabled that feature for me so I'm happy to be upgrading .

I'm having a few issue's with my audio playback options. I'm using an audio application called SRS Audio Sandbox Version 1.10.2.0 which doe's work with Windows 7 because when I first installed it was working perfect for a good few weeks time but recently I downloaded Realtek HD Audio Manager 2.57 to enable me to playback audio through my monitor speakers but it seems to have changed my audio setup ?

I have a 5.1 Logitech z906 speakers which take up green, black & yellow ports and my monitor has a green audio jack which I plugged in green and my Logitech's green jack I've plugged into Blue and used Realtek HD Manager to change Blue port to a Line Out option.

It appears to work accept when I do Speaker Playback Test clicking on diagram only left & right speakers playback noise though when I do it with headphones on all speakers playback noise: Left, Right, Center, Sub Rear Left & Rear Right not sure if that's normal ?

Under Sound proprieties my Realtek HD Audio is set as the default playback device in which both my speaker & monitor playback music but I need it to playback through SRS Audio Sandbox so I can manage and adjust the sound but whe... Read more

A:Audio Playback (Default Device Realtek) Knocks Out SRS Audio Sandbox

Reading some users comments on the Sandbox "audio enhancement" most comments are negative about this product. SRS Audio Sandbox - CNET Download.com

If it worked at one time and now does not, have you tried making it the default audio playback device rather than the RealTek? Or have you tried reinstalling it?

Read other 3 answers
RELEVANCY SCORE 51.2

I have a self-assembled desktop PC - full specs in the signature below, but in short, it has an AMD Phenom II X6 1090T processor on a Gigabyte GA-970A-DS3P mainboard, which uses a Realtek Azalia ALC887 on-board sound system. I have no loudspeakers and listen to the computer sound exclusively through a Microsoft LX-1000 headset. I also have a Logitech C270 HD webcam that has its own microphone. My PC has 16 GB RAM, a SSD and a large HDD. It runs Windows 8.1 Update 1 with all Windows updates (Patch Tuesday was this week, but my problems had started before that and I'm sure they're unrelated).

Everything is working fine, except the audio, which started behaving strangely a few days ago. The problems started suddenly and I can't think of anything that could have caused them. There were no hardware changes or any intervention in the hardware, nor did I install any new software that could have messed up things.

When playing music, it sounds muffled, with the volume very low and the voice and several instruments muted, while other instruments in the background arrangement sound louder. No graphic equalizer is on, and this happens with any player software (Windows Media Player, VLC, Media Player Classic, etc.), and any source (MP3 music, audio CDs, DVDs, videos, etc.). There appears to be no hardware problem with either my headset or the onboard audio: when I run both Windows' native and Realtek's driver sound output tests, the test tune comes out loud and clear in the tested chann... Read more

A:Realtek audio, Gigabyte mobo: strange-sounding audio, mic not working

First thing to do is disable or disconnect the Web Cam. They have been known to cause various sound problems. It may not be the problem, but eliminate it as the problem.

Stereo Mix needs to be set as the Default Recording Device.

Refresh the RealTek by going to the Device Manager, RIGHT click on the RealTek entry in the Sound section then LEFT click "Uninstall". DO NOT uninstall the drivers. Restart the PC and when Windows starts it will reinstall the sound. This usually fixes any Windows/Sound corruptions. If this does not fix it, download and reinstall the RealTek sound drivers.

Read other 1 answers
RELEVANCY SCORE 51.2

Hello,

I have Windows 7 Ultimate 64 bit and I have a problem with sound. When I plug my speakers in front panel I have output audio, but in back panel I don't.

My Audio Manager looks like this, but front panel is enabled and back panel is disabled. It does not recognize back (ANALOG) jack.


I tried with settings in this manager but without success, I cheked Control Panel > Sound and followed instructions but still no sound if speakers is in back panel. What to do?

P.S
Sorry for bad english

A:No sound in back audio panel jack - Realtek HD Audio Manager

What is set as the Default Playback Device? If "Digital" or "HDMI" is set as default you will not get any sound from rear audio connections. "Speaker" must be set as Default Playback Device/

Read other 7 answers
RELEVANCY SCORE 51.2

I'm having a strange problem in my HTPC. Audio is coming perfectly fine out from the S/PDIF coaxial output, and it's normally connected only that way to the receiver, but now for other reasons I also need to connect it using a 3.5 mm to a small mixer. So in the sound manager I changed the output to the "Speakers", and in fact the Realtek sound manager detects that a cable is plugged into that output and shows me the dialog where it's selected. Problem is, nothing comes out.

I know it's not the 3.5mm to RCA cable because I plugged in my phone, played some music and I can hear it just fine. But the rear speaker (green) output puts out no sound at all, as I also tested it plugging headphones. On the Sound Windows panel where you can select the playback device I can see the volume level move up and down when I'm playing any media file, as well as in the Volume Mixer. If I switch back to the S/PDIF output and change the input in my receiver, audio is coming just fine.

I haven't tried the front outputs because they are not connected. The motherboard has HD Audio but the case has AC97 connectors, so I never cared to connect them because I don't use them. I know the rear green output worked at some point because I remember having a pair of computer speakers connected to it a few years ago.

This is a Gigabyte GA-890FXA-UD5 (rev. 2.1) motherboard with an AMD 1090T and 16 GB of RAM, with Windows 7 Home Premium. The installation is about two months old wi... Read more

A:Realtek ALC889 audio, audio fine on S/PDIF, nothing from rear output

I found out after a while. In the popup dialog when a cable is plugged in, I had selected "Rear speaker out" mistakenly thinking it was talking about the rear output, not the rear speakers in a 5.1 speaker setting. Changing to "Front speaker out" solved the problem.

Read other 1 answers
RELEVANCY SCORE 51.2

Hello All!!

I have seen similar threads here but my problem is slightly different.
I have ASUS P4S8X-MX which have built in audio of Realtek AC'97 .
I am using Windows XP SP2 for quite a time and everything was fine unless i tried to install an updated driver for my sound. After updating, i got Code 10 error , device cannot start.
I uninstalled the drivers, Restart my PC and then installed my previous version of drivers.
Everything was fine and i can see volume icon in task bar. But when i tried playing an audio file there wasn't any sound. I clicked volume icon to raise it but it was disabled.
I double click it to open Mixer .. there are only 3 options (normally it use to have lot ..wave,speaker,etc..) Now it has only Wave , SW Synth, CD Player.. and No recording device.

I did try re-installing the drivers again and again but no LUCK..

I tried using Drivers Sweeper to remove the tracks .. doing that in Safe Mode and then again Installed Old drivers. It all go well but in the end its same situation with sound disabled.

I don't want to reinstall my Windows , is there any way to fix it ?

One thing i noticed is every time I install drivers the sound manager shows up at task bar but in moments it disappears while the soundman.exe is running in Processes and I can't find it in Control Panel as well (where it use to be) .


Its been 8 hours since I am struggling with that. But No LUCK!

Note: My PnP Software Device Enumerator is worki... Read more

A:Realtek AC'97 audio - drivers installed properly & services running but no audio

Hi muazzam

Is best to upgrade to SP3 (if only because MS has dropped support for SP2) but can start, for now, looking at your problem while you continue running with SP2

Let's start with these initial steps
1) List any Problem Devices

Make sure all your devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
2) Generate and attach a DirectX report

click Start->Run, enter dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)
3) If there were no Problem Devices (step 1 above) then also check on your Windows Audio service if Status=Started and StartupType=Automatic

I'll have a look and we can take it from there
 

Read other 12 answers
RELEVANCY SCORE 50.8

I think my question is this: how do I set up VSX-1124 (a Pioneer AVR) in Control Panel/Sound and Hardware/Sound so that its driver is Realtek HD Audio and not the Intel Display Audio one?

In Device Manager under Sound, Video and game controllers, I have two sound card drivers, Realtek High Definition and Intel Display Audio. I don't understand how Realtek High Definition Audio drivers work in relation to the Intel Display Audio drivers. If I go to Control Panel/Hardware and Sound/Sound then Playback, there are four options, as you can see from the picture below.

I'm guessing that if I choose the receiver as my default device that I'm using the Intel Display Audio drivers and any of the other three options that I'm using the Realtek drivers. Is this correct? If the receiver is the default device, everything works fine; I get sound from sites like cnn.com and I can listen to internet radio, etc. However, if Speakers are the default device, I don't get sound. Is this normal? If so, what's the reason for having Realtek? If it isn't normal, will I notice a difference if I use the Realtek drivers? If I would see/hear a difference, how do I get them to work?

A:Realtek High Definition Audio and Intel Display Audio

The RealTek is for the regular PC sound. The Intel Display Audio is for HDMI sound. If an HDMI cable is plugged in Windows will automatically default to the HDMI as the "default playback device". If you have an HDMI cable plugged in and want the PC sound you must manually change the playback device. If you want both HDMI and PC audio, you can't have that as Windows will only allow one default audio playback device.

Does this answer the question?

Read other 2 answers
RELEVANCY SCORE 50.8

Hello XPS Owners

Some help please i have my new dell xps l702x and the QuickSet cant launch waves audio maxx... I already reinstalled QuickSet and works, but when i restart my xps waves maxx audio touch key dont work :(  I already try with official dell drivers, realtek official last driver and the problem continue... I have to run manually the Dell Audio(Realtek waves maxx audio) and the icon appear in notification system tray (rigth down corner) i check msconfig-startup and the realtek procces are enable... Every time i turn on my computer i have to manually run Dell Audio as administrator and the screen of Audio Dell by Realtek appear :(

Any ideas or a guide to solve this problem... I paid $2400 for a system with that kind of problems(basic drivers)

So bad :( and fan start everytime doing normal stuff when gaming it gets hot i hope its normall but i will need thermal paste in my left arm...

I search al lot but cant find a solution only, i try drivers but the problem continues...


Please help me and sorry for my english :)

Bye...

A:QuickSet And Dell Audio by Realtek (Waves Maxx Audio) Fix

Andape,

Did you recently install/reinstall the operating system?

Start, control panel, Windows mobility center. Make sure the function row is set for multimedia key.



Rick

Read other 21 answers
RELEVANCY SCORE 50.8

Hey Guys,

So here it goes, I normally have my Logitech z-5500 speakers connected to the onboard sound output (green,yellow and black) as well as my Plantronics 780 connected to the front panel USB port. I used to be able to play music through any one without any problems, just had to select which one I wanted as my default playback device.

Now my problem is, I get audio fine through the 780, but I get no sound what so ever from any of the onboard ports. I have searched online for hours trying all the suggested solutions(check below) but I'm hoping its not a device failure =(

What's weird is that just like all other posts I've read, when I plug anything into the onboard jacks I get the speakers as connected and the audio level moves with sound..but I get no output from my speakers.
What I have tested:

1) removing and reinstalling audio drivers from Asus website. - no luck
2) trying a headphone in the different jacks to see if any would give audio - no luck
3) went into the BIOS made sure I was up to date and the sound device was enabled - no luck
I can post screenshots of anything that may help in trying to resolve this problem and would appreciate anyone assisting me.
Thank you.

A:No sound from onboard audio (Realtek High Defition Audio)

Ravir mate do yourself a favour and install a sound card I have the exact same board and I fitted an Asus Xonar DG after spending a load of time trying to make sense of the Asus site, RealTek site and the Windows feature which are all a crock of crap.
The GUI for the Xonar card is great for sound (up to 7:1 support) and effects and mixing. Best of all it is cheap. I have them in three of my machines and would not be bothered with the onboard rubbish. Sound Cards and Digital-to-Analog Converters - Xonar DG - ASUS

Read other 4 answers
RELEVANCY SCORE 50.8

This is a problem that just started after having my drive wiped and OS re-installed.


Sound plays quite loudly when played through virtually anything; media players, Youtube, Firefox and Internet Explorer, anything. Yet the sounds from certain video games are extremely low in volume, which has never happened to me before.

Also worth noting: At seemingly random intervals, certain sounds in the games would play at full volume.


Attaching my DxDiag




One thing I noticed is that in the Playback devices, the stereo mix always picks up sounds louder than the speakers play out, unsure if this is related at all.



Also not sure if it's related or relevant, but my original system had the hard drives set on IDE, but now they're both set on AHCI




EDIT: I think I've solved it. It was just a matter of turning on Loudness Equalization. Leaving it open because I wanna know if this is indeed the issue or just a quickfix.

A:RealTek audio loud, in-game audio sharply muted

I doubt that the loudness is the correct "fix" since the sound is OK except in games. Many games have an option for the sound level and can be adjusted in the game setup. Others use MIDI to generate the sounds.

Read other 5 answers
RELEVANCY SCORE 50.8

I have a self-assembled desktop PC - full specs in the signature below, but in short, it has an AMD Phenom II X6 1090T processor on a Gigabyte GA-970A-DS3P mainboard, which uses a Realtek Azalia ALC887 on-board sound system. I have no loudspeakers and listen to the computer sounds exclusively through a Microsoft LX-1000 headset. I also have a Logitech C270 HD webcam that has its own microphone. My PC has 16 GB RAM, a SSD and a large HDD. It runs Windows 8.1 Update 1 with all Windows updates (Patch Tuesday was this week, but my problems had started before that and I'm sure they're unrelated).

Everything is working fine, except the audio, which started behaving strangely a few days ago for no apparent reason. The problems started suddenly and I can't think of anything that could have caused them. There were no hardware changes or any intervention in the hardware, nor did I install any new software that could have messed up things.

When playing music, it sounds muffled, with the volume very low and the voice and several instruments muted, while other instruments in the background arrangement sound relatively louder. No graphic equalizer is on, and this happens with any player software (Windows Media Player, VLC, Media Player Classic, etc.), and any source (MP3 music, audio CDs, DVDs, videos, etc.). There appears to be no hardware problem with either my headset or the onboard audio: when I run both Windows' native and Realtek's driver sound output tests, the test tune comes out... Read more

A:Realtek audio, Gigabyte mobo: muffled audio, no mic input

This is a duplicate of what is posted on the Seven Forums.

Read other 2 answers
RELEVANCY SCORE 50.8

Can someone please help me try and figure out why my audio isnt working the way is should be?

Playing a blu ray disc (Tron Legacy) using PowerDVD 11 and there is no sound from the side speakers.

On the weekend I hooked up my next door nieghbours PS3 and it played all 8 channels perfectly.

I have been trying to figure this out for 6 weeks now and I am not getting anywhere at all.

A:Audio Problem - 5.1 & 7.1 channel not working with Realtek HD audio & ATI HD4670

Does this only Happen in PowerDVD 11? Have you tried Windows Media centre?

Josh

Read other 16 answers
RELEVANCY SCORE 50.4

My internal speakers seem to work fine but I can't get the sound to go into my headphones when I plug in my headphones. Is there a way how to fix this?
 

A:Problem with the Headphone Audio Jack with realtek HD audio

Read other 10 answers
RELEVANCY SCORE 50.4

Hi all,

I'd be grateful for any advice to my problem....

Last month I bought a new PC, a Dell XPS 8500 with an Intel Core i7-3770 processor. The PC has onboard audio (Realtek High Definition Audio).

I didn't buy new speakers as I have a perfectly usable set of Creative 6.1 speakers.

My problem is that although my computer plays Windows event sounds through all the speakers, applications such as iTunes only emit sound through the front pair.

I have googled the problem and as a result have configured the Realtek to use 7.1 audio but without the side pair.

Also, I have disabled the Realtek driver and have reloaded by asking Windows to select the best available.

But still the problem persists.

Any ideas?

Thanks in advance,

dagi

A:No audio except front speakers (Dell, Realtek Audio)

First, for proper operation you must use the Dell supplied sound driver. Non-Dell will either not work or install or will not work properly, and that includes the basic function Windows installed HD Audio Codec.

6.1 is an oddball speaker configuration for current technology systems, its either 2.1, 5.1 or 7.1.

I used to do a lot of support on the Dell users forum (community) and recall that certain applications will only play audio through "stereo" speakers only. My experience on the Dell forum (I had over 37,000 posts and am still registered) also is the reason I note the Dell supplied sound driver.

You could also post on the Dell community Desktop hardware section and one of the user experts there may have more suggestions.

Desktop - Dell Community

Read other 1 answers
RELEVANCY SCORE 50.4

omg, I was switched to a different pc at my job and the person there previously downloaded realtek to the pc and im having a problem with the headphones, when i put the headphones in i get a pop up confirming the action but im still hearing music from the speaker...its really annoying because im use to just pluging in the headphones and everything being normal...im not even sure why she downloaded this program, anyhow if you can please help, i need my music to keep me sane at work, its sooo ver depressing. the operating system is microsoft windows xp
 

Read other answers
RELEVANCY SCORE 50.4

I purchased a HP refurbished Envy 17-K224NR that has Realtek HD audio in divice manager, but it also has Beats Audio Console, but the console has very little sliders, such as the slider to control bass and voices.  Should I uninstall the realtek drivers and reinstall the BEats Audio Drivers to get the full Beats Audio conTHe system came with WIndows 10 and has sionce been updated with the anniversay update.

Read other answers
RELEVANCY SCORE 50.4

Hello.

Im having the dreadful "No Audio Output Device is Installed" problem on my realtek audio.

It worked some months ago, but im in no position to do a roll back. Im sure the hardware is just fine, it works with Ubuntu.

The computer is a Dell Vostro 430.
My OS is win7 64bit.

I tried the newest Realtek driver suite, the recommended dell-drivers and some basic windows-drivers. Nothing makes the "No Audio Output Device is Installed" go away.

Any help is welcome.
Ive attached my sound-related reg. I believe my realtek device is 0001.

A:Realtek Audio: No Audio Output Device is Installed

The Dell driver is required, non Dell drivers will either not work or not work correctly.

First thing, is the Integrated Audio enabled in the BIOS? (F2 at boot up to enter Setup).

Second, on Dell's (and many others) if the motherboard chipset drivers were not installed, the sound device will not work. In this model there are Intel motherboard chipset drivers. Try installing them and then the Dell sound driver. Dell Drivers

Read other 3 answers
RELEVANCY SCORE 50.4

Hi,

Not sure if this is possible, but thought I'd toss it out there... I'd like to have audio sent via HDMI to my monitor while at the same time using the MoBo output jack for a subwoofer. I've only been successful with one or the other by itself in any configuration I've been able configure.

Any thoughts?

Thanks

A:HDMI Audio AND Realtek MoBo Audio Simultaneously

Does your monitor have an Audio Out? Some do. If it does, HDMI to the monitor, then audio out from the monitor to your subwoofer. Mind you plugging something into the audio out may turn off the monitors internal speakers. You won't know until you try
But…here’s the kicker! A subwoofers job is to not only produce lower frequencies but to also blend nicely into its satellites (speakers). This is most commonly accomplished by either designing the sub and satellites to work together in that the lower cut off frequency of the satellites is close to the higher cut off frequency of the subwoofer. The other is to have an adjustable crossover that will allow you to match the subwoofers higher cut off frequency to that of the satellites lower cut off frequency. You also need to match their output (sound) so that they are even (or close enough!). Otherwise you will get a lot of boom from the sub and not be able to hear much from the monitor.
Monitors with built in speakers are not designed with fidelity in mind. They have tiny amplifiers and do not go very loud without sounding terribly distorted. Even if your monitor does have an audio out, you may be presented with the impossible challenge in trying to match it to your subwoofer. Honestly, you are better off purchasing a 2.1 (or 5.1) computer speaker system. You can get something pretty decent for not too much money.

Read other 3 answers
RELEVANCY SCORE 50.4

Hey I'm new here so I hope this is the right place to be posting this?

I'm using Windows 10 and have been since it was released, my issue is audio is being panned to the left or the volume from the right is lower than the left. This is an issue that's been going on for a long while, I think it may be something to do with my Realtek HD audio manager. I know it isn't a hardware problem because it affects my speakers and headphones, when I rolled back the driver it replaced it with a HD Audio Driver and the panning issue was gone so I know it's not the audio jack itself. I have reinstalled Realtek HD Audio manager and made sure it's on the latest version. It does this through my rear audio ports as well as my from headphone jack, but not through my Blue Yeti's audio output, but Realtek doesn't recognise that as an audio output. I have also checked the balancing on everything in Playback Devices. I can pan the audio to the right by about half and the volume balances but it loses some of the quality and causes it to sound really muddy.

I was wondering if anyone knows a fix? The only thing I haven't tried is a Windows reinstall, which I'd really rather not right now as I have a lot of data and no real way to safely back it up.

Read other answers
RELEVANCY SCORE 50.4

(Not sure if I am posting in the right place, move me if necessary)
 
Hello BleepingComputer
 
I just upgraded my computer a few days ago, and I am having problems with the Front Jack Audio/Headphone.
 
Normally, I set my Headphone to run simultaneous with my Speaker with Realtek HD audi/Stereo Nix (Disable Front Jack Detection and vice versa), and I could change the volume on both devices separately.
But since I changed the motherboard, when I have realtek installed, it doesn't have the Headphone setting in Sound/Playback.
The headphone work perfectly, but its linked to the Speaker's volume, which is really annoying.
Also, the Realtek layout changed from the last one I got, and doesn't have the "Disable Front Jack Detection" option.
(Picture: http://i903.photobucket.com/albums/ac232/notyellowasian11/Untitled-1_zps2242cdba.jpg)
 
So far, I have tired..
Installing an older version of Realtek driver;
Changing the audio setting in the BIOs (HD or AC97)
Changing the audio connector on the MOBO (Hd or AC97)
Tried multiple compinations with Realtek HD audio manager settings.
Cleaned every plugs/jacks related on that.
 
So far, I couldn't been able to get the Headphone tag at all when Realtek is installed.
 
Thanks !
 
---
Here's my spec:
MOBO: ASUS P8Z77-V LX
Audio: Realtek ALC887 (MOBO default)
CPU: Intel Core i&-3770k 3.50Hz
RAM: 2x 8 GB DDR3 Corsair
GPU: Nvidia GeForce 9800 GTX+ 512 MB
OS : Windows 7 Ultimate 64x
 
Current Audio Driver... Read more

A:Headphone/Front Jack Audio w/ Realtek HD Audio

could try ....
 
Control Pane>View by category>Hardware and Sound>Manage Audio Devices>(select device)>configure
 
It's  a long shot, I know. Just putting it out there.

Read other 2 answers