Over 1 million tech questions and answers.

System Board Replacement on X1 Carbon 3443 CTO

Q: System Board Replacement on X1 Carbon 3443 CTO

My motherboard died on my X1 Carbon Gen 1. I sent it to lenovo and the repair estimate was ~$750. I decided to replace it myself but the part for my system FRU 04X0495 (W8P,i7-3667U,8G,F,AMT,TPM,MT) new are quite expensive. I found a new systemboard FRU 04Y1988 (W8P,i7-3667U,8G,F,AMT,TPM) at a much more reasonable price and installed that. I now have a working machine (new machine type 3448-3Y2) but no touchscreen (I assume the MT stands for touch monitor or something).Question, and I think I know the answer, Is there any way to convert or add to my new systemboard the touch screen capability? I assume it is not just the driver?thanks,

Read other answers
RELEVANCY SCORE 200
Preferred Solution: System Board Replacement on X1 Carbon 3443 CTO

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 100.4

Hello Support, My X1 Carbon (3443-CTO) screen regardless of resets or reboots.  As soon as it's turned on it's immediately white. When I attach an external monitor, it works but the laptop screen is still white.  I suspect it's the led screen that's defective. Can I order a replacement part?  I'm comfortable with replacing it. Regards, Rick

Read other answers
RELEVANCY SCORE 75.2

Hello, looking for some help upgrading to 16Gb RAM and 256Gb SSD. Current (as shipped) details:X1 Carbon serial #R9X132HProduct: 3443CTO180Gb Intel SSD FRU #45N83058Gb RAM on a single SODIMMIf you can point me to a 16Gb part # for memory I would appreciate it. For the SSD if somebody can confirm SanDisk FRU #45N8299 will fit in the 1st Gen X1 Carbon that would be great. Thanks in advance.

A:X1 Carbon Gen 1 Type 3443 - memory and SSD

Welcome to the Community1. Unfortunately, the RAM upgrade is impossible. The quote from the laptop specification:"4GB or 8GB / PC3-10600 1333MHz DDR3L / soldered to systemboard, no sockets"2. The SSD FRU 45N8299 you mention is compatible with x1c gen1

Read other 1 answers
RELEVANCY SCORE 73.6

Can someone advise where I can buy a larger SSD for my X1 Carbon (Type 3443-CTO).  Not sure which generation of X1 this is. Currently have only 128GB.  Would like to have 1TB. I am also open to swapping the WWAN to free up the socket if that is a possibility.

A:Upgrade SSD to larger size for X1 Carbon Type 3443...

largest ssd for the X1 carbon gen 1 is 256 gigs. The wwan slot can't accept a mSATA (I tried).

Read other 8 answers
RELEVANCY SCORE 72

I have a feeling that my Graphic card is about to die... Screen freezes sometime and the computer seems to be still running. It was saying for a while : "the graphic card has stopped working but has recovered" but now it stopped saying that and just freezes.Also sometimes when having it opened for a while and having lunched and used application requiring the graphic car to work I can see frozen pixels or stripes of frozen pixels in a video. My question is if I have to replace it would it be possible to go for an upgrade? I currently have Gforce 840Many inputs are appreciated

Read other answers
RELEVANCY SCORE 68

I was able to create a bootable USB drive with the Maintenance Utility files. When I boot from the drive the Thinkpad Serial Number Update Utilities screen appears. After choosing the option to change the serial number the screen request a long serial number starting with 1S. For our T440 laptop, I been using 1S20B7S0XXUSPF00ACZZ. (20B7S0XX is the machine and model type, US is the country code, and PF00ACZZ is the serial number) When I try to enter this number the message appears ? Data of the same device type is already in EEPROM?. When I choose the option to delete the EEPROM the message appears ?C0TpREADEEPROMBlock: Write access to Block#84 is denied Status=0xf, EEPROM fail when reading or writing data? How do I update the serial number in the BIOS? I have the maintenance key.













Solved!

Go to Solution.

A:System Update doesn't work after System Board Replacement

Version 2.02 of the Maintenance Utily does not give the options shown in the T440 Maintenance manual.Using version 1.83 gives option compatible with the manual but it is requesting a serial starting with 1S and has 16 charactersWould appreciate some help

Read other 4 answers
RELEVANCY SCORE 68

I want to use Blender Cycles GPU rendering. It only works with Nividia CUDA cards. I have an ATI Radeon card. This card is soldered to the system board so I think swaping it is not an option. Can I replace the whole system board for one that has an Nvidia CUDA compatibale GPU on it?

Read other answers
RELEVANCY SCORE 68

The systemboard on my laptop went a couple of weeks ago, I found a replacement on eBay with the serial #30L2589 the number on my system board 10L0947. Are these boards compatible?
 

Read other answers
RELEVANCY SCORE 68

I have an old Gateway P5-133 computer with an Evergreen MX-Pro 200 cpu upgrade on an American Megatrends system board.
I was in the process of upgrading it with a larger hard drive, WinME, a couple of USB ports, potentially more RAM etc. and was experiencing intermittent episodes of it not booting up. My new machine's monitor, which I used while working on this old POS, was saying there is no video signal coming from the old computer. A new video adapter produced the same message, so I am assuming the system board croaked. It did boot fine following the installation of the new HD and ME.
What would be a suitable replacement if you would be so kind as to enlighten me? I can return the PCI Video and USB adapters but not the Maxtor 80GB Ultra ATA/133 drive and ME.
Regards,
Doug
 

A:Replacement System Board

GoofyGimp

Welcome to TSG! As far as a replacement board, you are probably wasting your time. My suggestion would be to keep the video you bought, the hard drive and the floppy. The rest is very outdated. Your board is a socket 5 board with no real replacement out there. The case and power supply will be of no use on a newer board (probably an AT form factor). The evergreen chip will only fit a socket 5 board and you can go much much faster with a low end $30 duron processor. The memory is probably 70ns dram and will not be able to be used in a newer board. Not really much you can save. Your choices are to look at used computer shops for an old socket 5 board or to shell out a couple of bucks for a bare bones system.

SeeYa
 

Read other 2 answers
RELEVANCY SCORE 67.2

Hello, I just got my lenovo back from Depot after waiting for 2 weeks, it was sent for a Touchscreen issue, came back with some major hardware issues.When I first turned it on this morning, it was working fine, touchsreen was responding, then after about 5 minutes the screen started flickering I would say, and just shut down. Restarted it, then same thing happens every time I log in, it does it about 1 or 2 minutes after, or even on the boot screen.After couple of hard resets and restarts, the machine doesn;t turn on anymore, I press the power button, the mute and mic LEDs blink, then nothing happens.

Read other answers
RELEVANCY SCORE 67.2

I have an e7450 that has had what I believe to be a system board failure. It is out of warranty so I am looking at replacing the system board myself. The part number is CN-0Y15C1-12963-54I-  A0EF  REV A00.
I believe the original unit has an i5-5300U. Most of the replacement boards I'm finding online have an i7-5600U. 
Will there be an issue using the different processor if the board is still the same?

Read other answers
RELEVANCY SCORE 67.2

Hi all I have damaged by X260 (Model 20F5S4BY00) and need to replace the system board. Currently it has part number 01YT045 board installed. I've found a more reasonably priced board on eBay with part number 01HX027. Is this compatible? Thanks in advance 1enny

A:X260 - Replacement system board

Hi 1enny,
 
Welcome to the Community Forums.
 
Checking with recommended substitutes specific to MTM 20F5S4BY00:
 
Part number 01EN201 WV3 FRU Intel® Core? i5-6300U Processor (3M Cache, Up to 2.40 GHz), WIN, Y-AMT, Y-TPM, Dock
Part number 00UP198 Wolverine 3 FRU Intel® Core? i5-6300U Processor (3M Cache, Up to 2.40 GHz), WIN, Y-AMT, Y-TPM, Dock
Part number 01HX035 WV3 FRU Intel® Core? i5-6300U Processor (3M Cache, Up to 2.40 GHz), WIN, Y-AMT, Y-TPM, Dock
 
Part number 01HX027 (via part search)   
WV3 FRU Intel® Core? i5-6200U Processor (3M Cache, Up to 2.30 GHz), WIN, N-AMT, Y-TPM, Dock   (01HX027) is compatible with the following machines:THINKPAD-X260  20F5 , 20F6  just like 01YT045 (original board). Differences may be on some detailed parts but should work in general.
 
Hope this helps answer your query.
 
Regards
 

Read other 2 answers
RELEVANCY SCORE 66.4

My X1 died on me and, according to the sheet of paper that came back from the repair center, had its system board replaced. Unfortunately, when booting, I get a prompt for a bitlocker recovery key - and the key I have (confirmed with Microsoft) is not working. The key id shown on the recovery screen is also different. I've spent about 40 minutes on the phone now with Lenovo support, and haven't gotten anywhere - how can I get back into my machine? It would appear that, since the hard drive was not replaced, I should still be able to get in with my existing key, or am I missing something there?

A:Locked out of bitlocker after system board replacement

https://social.technet.microsoft.com/Forums/windows/en-US/d7be2e19-3eb2-4e7f-8d6a-c7f0f5474b93/bitlo...

Read other 2 answers
RELEVANCY SCORE 66.4

Is it possible to get a replacement system board for a Dell XPS 16. My LCD screen is blank, and external monitor shows garbled images, so I am assuming the graphics chip is blown, and as it's integrated, I would need a new system board.

I am UK based, and am happy to fit myself.

A:Dell XPS 16 (1645) system board replacement

Hi,
Thank you for writing to us!
Kindly run complete diagnostics on the system to check for errors.
Provide us with the service tag and email address.
Thanks
Robin

Read other 3 answers
RELEVANCY SCORE 65.6

Hi guys, I have got a system board damage, so I need to exchange it. I have never done it before, so I'm struggling with findings of correct part for exchanging to. As far as I understood FRU number of the system board is what I need. I have found one which says 04x5166 right next to the RAM slot. Is it the only reference I need to use to find a right part? I have found a part on eBay, where in description it is written 04x5166 and three different numbers. You think this one should fit? https://m.ebay.com/itm/QTY-1x-Lenovo-Thinkpad-X240-laptop-motherboard-intel-i7-4600U-VIUX1-NM-A091-/... I would really like to try to repair my old friend first before going for an expensive new machine  lookign forward to hear from you! Anton

Read other answers
RELEVANCY SCORE 65.6

Hello  All    issue    with   system  board  replaced  for t460s   unitsboard  coming   from   lenovo works  ,, the  product version fieldis populated to  t460    not  t460sanybody  knows  of a utility    to  correct  that  ?Lenovo  tech  support   does not  have a proper  answer 

Read other answers
RELEVANCY SCORE 65.6

I replaced the system board on my IBM thinkpad 600E because the original problem was that everytime the system booted up it would keep going to the time (time would not stay). I know that there is a battery on the system board but I figured it would be less of a hassle if I just replace the system board. I did that and now the system will not boot up. The LED's come on and I hear the fan run but nothing will show up on the screen. What should I do?
 

A:IBM Thinkpad 660E will not boot after System Board Replacement

Are you sure the replacement board was not broken? Maybe you did something wrong when putting the thing back together again?

Just take the thing apart again and try your previous mobo. If that works, try with the new one again.
 

Read other 3 answers
RELEVANCY SCORE 65.6

Hi I have 3443-CTO Carbon X1 which I mapped to 1 generation, online I see a lot of batteries which compatable to 3444, but didin't see my 3443.... Hmmm not sure if this true, I thought that any battery for gen 1 will work on my unit, am I right ? Tx all for leads, recommendation, my battery now last 2hr 15 min only. TxMario

Read other answers
RELEVANCY SCORE 64.4

I have a yoga 260 that would not charge the battery when plugged in. I tried a different charger which didn't work and then replaced the battery but also no luck. I sent it to Lenovo and was told I need a new system board which was going to cost around that of a newer laptop. I decided to replace it myself with a refurbished board as I've done this on an old computer in the past. With the install complete it can get some charge to the board because it tries to start up but I am getting 2 short beeps with nothing on the screen. I realize this usually means there is a system board issue. I've rechecked all the connections and everything 4x so I don't think it was an install problem. Is there something else I need to do or did I just buy a bad refurbished board?

Read other answers
RELEVANCY SCORE 58.4

Hello.
In June 2016 our company bought Inspiron 5759. I used it at office, we have air conditioning, nothing that could cause overheating or other problems. In the end of July 17 laptop just turned off and didnt react on any actions. I brought to service center and they told it's the hub located on the same board with CPU. The only way to fix it is to replace the whole board which costs around 600 USD because there's CPU Core i7 in it. I was given another laptop Inspiron 5558 which was not used since winter of 2017 because it had problems with WiFi. I tried to connect it with LAN cable and discovered that LAN is not working, in fact there's no LAN adapter in device manager. Service center said today that's the same problem - but this time hub is not completely broken, it's just doesnt see LAN adapter and periodically shuts down WiFi. The technician told that this is a frequent problem with Inspirons and Dell knows about it but doesnt recall laptops or extend warranty on this spare part. I asked when second laptop got the wifi issues - it started at the beginning of 2017 and warranty ended in December 2016. Again just 1-2 months.

So, it looks very strange that Dell laptops break right after ending of warranty with same problem, and we can't just change the hub, we need to buy a new board which includes CPU for 600 USD.
SNs: c0jchc2, 5lcmd72

Read other answers
RELEVANCY SCORE 54.4

Hello. Thoughts?   Audio/ USB board on the left side of X1 Carbon is overheating to the point that the case is almost too hot to touch.  Is this more likely to be a fried board or software sending too much power to the board.  Seemed to work fine for the first two weeks that i owned this pre-owned machine.   Jeff

A:X1 Carbon (2nd Gen) Audio/USB board is burning hot

My guess is that the audio/usb board is sick

Read other 1 answers
RELEVANCY SCORE 53.6

I'm new to this bloggs.I have an X1 Carbon 1st Gen (Type 34xx) Laptop (ThinkPad) with 128gb SSD.I want to replace it to a larger one.Which SSD should I buy?Thanks a lot

Read other answers
RELEVANCY SCORE 53.6

I ordered a X1 Carbon 5th Gen with the default 128GB SATA m.2 drive and it arrives next week.  I'd like to replace the drive with a Samsung 960 EVO PCIe NVMe m.2 drive. The Samsung 960 EVO is compatible, correct? Since I don't have the necessary equipment to clone the existing m.2 drive, I plan to download Lenovo Recovery media from https://support.lenovo.com/us/en/solutions/ht103653 to reinstall Windows and whatever drivers, etc I might need.   This rebuild method should ensure that I have all the same hidden partitions and software as the original PC, correct? I've loved using my W530 these past 4 years, but excited for the new Carbon. Thanks in advance for your help.  

Read other answers
RELEVANCY SCORE 53.6

I'm new to this bloggs.
I have an X1 Carbon 1st Gen (Type 34xx) Laptop (ThinkPad) with 128gb SSD.
I want to replace it to a larger one.
Which SSD should I buy?
Thanks a lot
 
Moderator note: subject line was changed to match content.  Was:  X1 Carbon 5th Gen SSD replacement

A:X1 Carbon 1st Gen SSD replacement

Try to look on Samsung m.2 SATA SSD 

Read other 4 answers
RELEVANCY SCORE 52.8

I just received my X1 Carbon 5th gen and took out the 128GB SSD that it came with, and installed a Samsung 960 EVO M.2 (part # MZ-V6E500BW). I am concerned about what the diagnostics screen (press F10 on bootup) is showing me. Many of the fields such as "Manufacturer" and "Model number" show "Unknown" and "Not Supported". Is this normal? I've attached a screenshot. When I look at the existing Liteon 128 SSD these fields are filled in.


























Samsung.jpg ?155 KB

Read other answers
RELEVANCY SCORE 52.8

I would like to replace the top lid/lcd cover on my 2015 X1-Carbon, 3rd Gen (20BT), Non-Touch, 1080p. A couple weeks ago I was able to access a service video at LenovoServiceTraining.com, however I am no longer able to access the videos...it's asking for a username a password. Does anyone know of a video showing how to replace the top lid on this model? Thanks so much for your assistance :-)

Read other answers
RELEVANCY SCORE 52.8

I'm trying to figure out how and what kind of keys I have. I bought what said was a x1 carbon 4th gen key for my device, but it didn't fit properly. I'm just looking for a way to determine how to get the exact key for my laptop. Any way of doing this?

Read other answers
RELEVANCY SCORE 52.8

Hello everyone, Would be really appreciative if I could get some help here.  I need to replace the keyboard for my gen 2 x1 carbon.  Is the FRU # 04X5570 for the gen2 x1 correct?  Are my only options ebay/amazon/newegg?  Looking up on Lenovo's online parts store, looks like I would have to call IBM for availability at $255 for the unit. l

A:X1 carbon gen 2 keyboard fru and replacement

Hi chcane,Warm Greetings & welcome to Lenovo Community, happy to have you here.As I understand that you have query regarding replacement FRU for ThinkPad X1 Carbon Gen 2
That FRU - 04X5570 is correct for complete list please check from here 
 
I hope the above information helped you.
Please feel free to post in Lenovo Community Forums if you have any further queries!
 
Regards,

Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 4 answers
RELEVANCY SCORE 52.8

Hi, I have the X1 Carbon Gen 2 model numbber: 20A7CT01WW and it has a broken screen. i was wondering if model number: 20A70001AU has the same screen?

A:X1 Carbon Gen 2 Screen replacement

Hi TheLiar,
 
Welcome to Lenovo Community!
 
Yes, it will be same for both the MTM number which you have provided, incase if you are looking to buy the parts separately you can lookout for below part numbers.
 

00HN826 - LGD 14.0? WQHD IPS AG
00HN829 - LCD ASM 14.0"WQHD AG(LGD) for Multiouch
00HN833 - P+LCD, HH OGS, LGD140WQHD
04X3923 - LGD 14.0"WQHD AG panel for non-touch; LGD MODEL LP140QH1-SPB1
04X3927 - AUO 14.0"HD+ AG
04X3928 - Inolux 14.0"HD+ AG
04Y1584 - CMI 14.0"HD+ AG panel CMI N140FGE-EA2
04Y1585 - AUO 14.0"HD+ AG panel AUO B140RTN03.0

Hope this helps.
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 6 answers
RELEVANCY SCORE 52.8

HelloI have purchased and yet to receive a faulty gen 3 lenovo off eBay. The battery in the eBay listing seems to have exploded (see image) I have ordered a battery with the same model 41CP5/58/73-2 but it is 14.8v  Would this be a sufficient replacement to just test and see if the laptop would power on?  Many thanks

Read other answers
RELEVANCY SCORE 52.8

hello, i must change my keyboard because the water, so i serached almost internet and i don't see any keyboard for my model ?? WANT TO KNOW THE PRICE ? AND ALSOO SHIPPING TO QUÉBEC CITY ?Any one here to help me please Thanks?? PAR

A:Replacement keyboard for my X1 Carbon

I am not certain I've identified the part correctly, but this looks like the French Canadian keyboard for the X1 Carbon Gen 3 (MT-M beginning 20BS or 20BT). If so, I believe the part you need is FRU 00HT302 or 00HN947 (the two are equivalent, just made by different manufacturers). You should be able to find a supplier online - I'd start looking on the Lenovo site for options in your country (click).

Read other 1 answers
RELEVANCY SCORE 52.8

Is it possible to purchase a mother board for an older hp desk top model # P6216F if so where could I purchase one.thank youAnthony Simonie

A:Mother board replacement

Motherboard P6216F  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.        If my answer solved your problem please mark it as the Accepted Solution. Thanks!

Read other 1 answers
RELEVANCY SCORE 52.8

How to get replacement Mother board from HP

Read other answers
RELEVANCY SCORE 52.8

Last night I tried to replace the mother board on my Dell Inspiron 5000e laptop. I bought the replacement part from an Ebay store, and it is still under warranty (90 days). After taking apart my entire laptop and putting the whole thing back together--a job that took my friend and I three hours--we plugged it in for the moment of truth. The battery light came on, so far so good. Then we hit the power button and...nothing happened. Well almost nothing. The machine appeared to turn on. All three lights on the the bottom of the LCD went on, but that's it. The fan didn't start, the monitor didn't start. The hard drive light was on but didn't appear to be reading at all. (i.e. no blinking or noise.) I'm quite perplexed. Everything appeared to go back together perfectly with the possible exception of the diskette drive cable clip, which we weren't exactly sure whether to put back in over, under, or through the disk drive data cable. We eventually put it through. For instructions and pictures of the process, check out link:

http://support.dell.com/support/edocs/systems/pblan/removing.htm

Everything else seemed to go back together seemlessly. We were very careful with screws and put all the right sizes back into their correct places. What could be causing this? Have I received a defective part? Are there any other explanations? I suppose a possible explanation is that the processor and/or video board are not quite connected correctly, but they seemed t... Read more

A:Mother Board Replacement

Read other 13 answers
RELEVANCY SCORE 52.8

unplugged elect cord of phone from voltage surge protection,computer went off but light stayed on.  I've been told it was my mother board,  This machine has stuff I need and I  would like very much to fix it.  Does anyone know where I can get this done?

A:MOTHER BOARD REPLACEMENT

A local computer repair shop is the best bet, but for a computer that old, it will probably cost more than it is worth.  Best option is to salvage the data from the hard drive onto a working PC.  Easiest way to do that is to remove the hard drive from the old Pavilion A6400 and connect it to a working PC.  If it is just to retrieve the data, an adapter similar to this will work nicelyhttps://www.amazon.com/AGPtek-Drive-Adapter-Converter-External/dp/B00BIE996S/ref=pd_sim_147_2?_encod...

Read other 1 answers
RELEVANCY SCORE 52.8

Hey guys
i have a compaq presario SR1610NX Recently i shorted out my mother board while doing a proccessor trade out (trust me the proccessor is compatable as the computer did run for a while after the switch). anyway i called up compaq and they say that my mother board was discontinued and they tried to sell me a whole new tower. i need a compatible replacement. im using a AMD Athlon 64 3700 proccessor.
Please Help Me- Dr. Feelgood
 

A:Mother Board Replacement Help

Read other 11 answers
RELEVANCY SCORE 52.4

Hi, I got a 3rd Gen Carbon X1 with a touch screen. Now the screen is broken and I am afraid I have to replace a new one. Is it possible for me to replace a non-touch screen instead of a touch one, since I found the touch function didn't that improtant for me? And if I have to get a touch screen, how much it would be?Thanks for the help!!  

A:Carbon X1 touch screen replacement

It isn't just the LCD that is different. The panel, bezel, lid, cable and hinges all are different.  If you want to repair with non-touch, the best choice might be to look for a used, complete assembly

Read other 2 answers
RELEVANCY SCORE 52.4

The battery life for my X1 Carbon 4th Gen isn't very good, I'm getting 5-6 hours max on light load and low screen brightness. My battery wear is at 9.5%, according to BatteryBar. My question is, is it possible to replace the battery in this laptop with a larger batter (compatible wattage but larger overall Wh) to improve the battery life? Other than the battery life, my Carbon has been great, but the low battery life may soon drive me to purchase a different laptop. Thanks in advance. 

Read other answers
RELEVANCY SCORE 52.4

Anyone know where I can find the battery replacement instructions for an X1 Carbon 4th gen?  It is different from prior. Thanks, Walt

Read other answers
RELEVANCY SCORE 52.4

Several of our 2nd gen/20A7 carbons have lost their circular rubber feet on the bottom. All the units are less than a year old but Lenovo has told me that this wouldn't be covered under the warranty. Not a big deal, but I'm having an impossible time finding the feet to buy on my own. They aren't listed on any of Lenovo's part lists for the X1 and I've only seen feet for the X220/230 units on 3rd party sites. I'm hoping someone on the boards here is familiar with the part. Thanks










Solved!
Go to Solution.

A:Replacement feet for X1 Carbon 2nd gen (20A7)

Lenovo did end up shipping me replacement feet under warranty, which was a very nice surprise. If anyone has a similar issue and runs across this thread, the part number for the replacement rubber feet kit is HT096. As of writing this I wasn't able to find any references to that number other than on the paperwork with the shipment, but it may just be a new PN.

Read other 9 answers
RELEVANCY SCORE 52.4

My screen got vertical lines and dead last week. I sent the laptop to the service center to get a replacement. I got it back yesterday and found there are light bleeding out from the four cornors. And i feel the screen quality is not as good as the original one in terms of black level, viewing angle. Should I call back and let them redo it?  Another issue is that they reset or reinstalled the system (even though I removed my password). Not it looks different when the computer boots up. It was showing a white Lenovo logo in a pure black background. Not it starts with a thinkpad sign and then comes with the four ugly microsoft square logo. Is there anyway to let it go back to what it looked like before? ??

Read other answers
RELEVANCY SCORE 52.4

Hello, I want to know if I can replace the old battery of mine Carbon´s (Gen1 & gen 2 ) with new ones with more cells like 6 or 8. And also if any of them are compatible with the old models.Any recommendation of brands apart of the Lenovo original are apreciate.  













Solved!

Go to Solution.

A:Options Battery Replacement for Carbon X1

Welcome, voloffOriginal batteriy for x1c gen1FRU 45N1071 - Simplo 4cell / 46Wh bateryx1c gen2FRU 45N1701 - Sony 8cell / 46Wh Polymer batteryFRU 45N1703 - Simplo 8cell / 46Wh Polymer batteryConclusions are obvious.Sources - laptops fru_bom files on the support site

Read other 2 answers
RELEVANCY SCORE 52.4

I need a new LCD. on back of the broken  LCD it is fru 04X1756 in the service part list it says fru 04Y1575.
 
Any clue?
 
Moderator edit: Added detail to subject.

A:X1 Carbon Gen 1 3460 replacement parts (LCD)?

Lenovo Serviceshop - under ThinkPad Parts, enter the second FRU.

Read other 2 answers
RELEVANCY SCORE 52.4

I know the new P models haven't release yet, but... I have a W520 - 16GB, 512GB SSD, nvidia quadro 1000m, i7-2860QM @ 2.5GHz. I want to move to a thinner, lighter computer that uses less wattage (I'm often on a boat running off of battery, and the 170W supply draws 15-18A @ 12v which is crazy). HOWEVER, I don't want to sacrifice performance. Chrome/General office apps + Photoshop, Illustrator and Premier. Do I pretty much need to go with a P51 to maintain the same or better level of performance? It's slightly thinner but bigger in LxW than the 520 and it uses the same power draw. My biggest concern is the i7-2860QM. It's a pretty good processor that the standard i7 used in the X1 carbon, yoga, etc. doesn't seem to compare to. Add in the discrete graphics (even though this is a quadro 1000)... I'm wondering if maybe the P51s will be comparable or better than the 520? Thinner, lower power, etc. Any thoughts on the new X1 Carbon vs. the W520? Lastly.. any thoughts on the screens on the new P51 and P51s vs the W520? My 520 is fully readable in direct sunlight. I've seen pro and con comments on the P series screens. I've heard the new ones will PROBABLY come with the same screens but with adjusted documented specifications that are closer to reality. Has anyone seen one of these screens in direct sunlight and also seen a W520 screen? When looking to spend $3k on a new laptop.. would like to be sure! Thanks!

Read other answers
RELEVANCY SCORE 52.4

Hello,I've bought battery replacement for my client's X1 Carbon 20A7 on aliexpress.The orginial battery is 14.8V 3.04Ah/45Wh while the one I was sent is 15.2V 3.29Ah/50WhI wanted to know if I can install it instead of the original one.Thank you


























P70402-112418.jpg ?1710 KB

Read other answers