Over 1 million tech questions and answers.

BSOD - Dump files included - Help please

Q: BSOD - Dump files included - Help please

Hi everyone.
I've been getting a BSOD for a few days, and I don't know why.
And now it's gotten to the point where as soon as Windows finishes loading, it crashes immediately.
The install of XP is pretty fresh, and there are no malicious programs, trojans, viruses, or spyware.
The laptop runs fine in safe mode without any freezing or crashing.
I have run memtest for a while, and no errors come up.
I tried running hard drive test, but since my laptop needs to load special drivers from a floppy disk, I couldn't run a complete drive test.

Here is the BSOD error message:

0x0000008E (0xC0000005, 0x80610305, 0xA5FBD9DC, 0x.....)
I can't read the rest because the computer auto-restarts too quickly.

Here are my laptop specs (Laptop is over 3 years old - running hard almost everyday):

Sager 9880
Pentium 4 3.0 GHz
512MB PC2-4200/200P RAM
100GB Seagate ATA 2.5" HD
ATI X800 Mobility Radeon - 256MB/PCIxpress (Removable)

I have included the most recent minidump files.
Can anyone please help me to figure out what is wrong?

RELEVANCY SCORE 200
Preferred Solution: BSOD - Dump files included - Help please

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD - Dump files included - Help please

Hello jbondsr


1. This very often is a RAM problem. If you have more than one stick of RAM (256MB or more) swap them over or take one out and try again with only stick #1. If it does not help or makes things worse swap the sticks and try again with only stick #2. This will identify if you have a bad stick.

2. It could also be a driver issue.The fact that the machine is OK in Safe Mode points to this .
Turn off automatic rebooting (you can do this in Safe Mode)
Right-click My Computer / Properties / Advanced / Startup and Recovery/Settings.
Under System Failure, uncheck the Automatically restart check box
Apply/OK

Reboot into normal mode
You will then get a BSOD with error message which will help identify the problem. You will now be able to read all the STOP message. Look if there is a driver mentioned "*****.sys" and post back

Read other 2 answers
RELEVANCY SCORE 81.2

I ordered my computer from Puget Systems some time ago and recently sent it in for repair because of a faulty motherboard. They replaced the motherboard, ram module and installed an 8800 GTX video card. Ever since i got it back I have been getting the DRIVER IRQL Not less then equal BSOD. When I reboot it does the same bsod upon loading my desktop. The only thing I have found to fix the problem is to boot into safemode and reinstall my video drivers. I installed different drivers and the problem seemed to vanish for a few weeks until today. I was loading into a HL2 server and it never loaded and I couldn't ctrl-alt-del so I did a hard shutdown and rebooted to receive the same error. After some research I came to discover the minidump files and this forum.

below is the 2 dumps from today and 3 of the 4 dumps from the last time i had the bsod other then today.

also uploaded on my webspace is all my dumps since i got the computer.. 06-xx-07 is the month I got my computer back from repair..anything before then probably isn't relevant.

http://blackmage.org/leaderz0rz/Minidump.zip
 

A:BSOD dump files included

All the current minidumps point to NTOSKRNL.EXE...

This denotes a general Windows instability. I would start by testing or swapping this new RAM module... It may be defective
 

Read other 4 answers
RELEVANCY SCORE 80.4

Specs: AMD FX-6200 / R9 280x / ASRock 970 Extreme3 / 850W PSU / Windows 7 (I can provide more specs or more specifics in needed)

Background: The PC is about 3 or 4 years old IIRC (some components have been upgraded since). When I first bought it I would get a BSOD after about 5 minutes of playing Battlefield 3. I had an inkling it was a cooling issue so I upgraded the CPU cooler and bought a beefier PSU to go along with it and I haven't had problems with persistent BSODs since. I'm not sure if this is related, but I would get a random blue screen once every 4 months or so at random times. This wasn't a big problem for me so I just overlooked it (a mistake, I know).

Current Issue: Late last week the persistent BSODs came back with a vengeance. Whenever I try to play a demanding game, such as Overwatch or PUBG, the system will BSOD after about an hour or so. These are games which I've played many times before for long intervals with no problems. Additionally I can still browse the internet or play less demanding games (Darkest Dungeon for example) with no issues.

List of things I have done to try to fix this issue:Updated video drivers, which were out of date.
Ran a virus scan with AVG.
Ran CCleaner.
Thinking it may be a cooling issue again I brought two large standing fans into my room and angled them towards the PC. I was actually able to play about 2.5 hours this time before BSOD, but subsequent attempts to play with this setup haven't helped.
I've monitored the CPU... Read more

A:BSOD whenever I try to game (dump files included)

Hi. . .

The 3 dumps named Microsoft drivers as the probable cause, which means that the likely cause is unknown hardware failure.

Unfortunately, the dumps are incapable of telling us which piece of hardware has failed. Dumps are only good for figuring out software problems.

All I can really do here is to give you some hardware diagnostic programs to run.RAM - memtest86+ - run 1 stick at a time; alternate the slots - https://www.sysnative.com/forums/har...memtest86.html
HDD - SeaTools for DOS, LONG test - https://www.sysnative.com/forums/har...agnostics.html
FurMark video card test - https://www.sysnative.com/forums/har...ress-test.html
Prime95 CPU - https://www.sysnative.com/forums/har...s-testing.html

The problem may also be with other hardware parts such as the motherboard or PSU for which there are no software tests.

Start with the HDD test as one bugcheck was 0x24 - NTFS file system. When 0x24 is seen, there usually is a bad hard drive involved.

If you are encountering a specific hardware issue, feel free to post in our Hardware Forum - Motherboards, Bios & CPU

Regards. . .

jcgriff2

`


Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\062917-81604-01.dmp]
Built by: 7601.23807.amd64fre.win7sp1_ldr.170512-0600
Debug session time: Thu Jun 29 19:33:00.009 2017 (UTC - 4:00)
System Uptime: 0 days 0:19:01.149
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+3bdaf )
DEFAULT_BUCKET_ID: WIN7_DRIVER_F... Read more

Read other 1 answers
RELEVANCY SCORE 80.4

Specs: AMD FX-6200 / R9 280x / ASRock 970 Extreme3 / 850W PSU / Windows 7 (I can provide more specs or more specifics in needed)

Background: The PC is about 3 or 4 years old IIRC (some components have been upgraded since). When I first bought it I would get a BSOD after about 5 minutes of playing Battlefield 3. I had an inkling it was a cooling issue so I upgraded the CPU cooler and bought a beefier PSU to go along with it and I haven't had problems with persistent BSODs since. I'm not sure if this is related, but I would get a random blue screen once every 4 months or so at random times. This wasn't a big problem for me so I just overlooked it (a mistake, I know).

Current Issue: Late last week the persistent BSODs came back with a vengeance. Whenever I try to play a demanding game, such as Overwatch or PUBG, the system will BSOD after about an hour or so. These are games which I've played many times before for long intervals with no problems. Additionally I can still browse the internet or play less demanding games (Darkest Dungeon for example) with no issues.

List of things I have done to try to fix this issue:Updated video drivers, which were out of date.
Ran a virus scan with AVG.
Ran CCleaner.
Thinking it may be a cooling issue again I brought two large standing fans into my room and angled them towards the PC. I was actually able to play about 2.5 hours this time before BSOD, but subsequent attempts to play with this setup haven't helped.
I've monitored the CPU... Read more

A:BSOD whenever I try to game (dump files included)

Hi. . .

The 3 dumps named Microsoft drivers as the probable cause, which means that the likely cause is unknown hardware failure.

Unfortunately, the dumps are incapable of telling us which piece of hardware has failed. Dumps are only good for figuring out software problems.

All I can really do here is to give you some hardware diagnostic programs to run.RAM - memtest86+ - run 1 stick at a time; alternate the slots - https://www.sysnative.com/forums/har...memtest86.html
HDD - SeaTools for DOS, LONG test - https://www.sysnative.com/forums/har...agnostics.html
FurMark video card test - https://www.sysnative.com/forums/har...ress-test.html
Prime95 CPU - https://www.sysnative.com/forums/har...s-testing.html

The problem may also be with other hardware parts such as the motherboard or PSU for which there are no software tests.

Start with the HDD test as one bugcheck was 0x24 - NTFS file system. When 0x24 is seen, there usually is a bad hard drive involved, but not always.

If you are encountering a specific hardware issue, feel free to post in our Hardware Forum - Motherboards, Bios & CPU

Regards. . .

jcgriff2

`


Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\062917-81604-01.dmp]
Built by: 7601.23807.amd64fre.win7sp1_ldr.170512-0600
Debug session time: Thu Jun 29 19:33:00.009 2017 (UTC - 4:00)
System Uptime: 0 days 0:19:01.149
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+3bdaf )
DEFAULT_BUCKET_ID... Read more

Read other 6 answers
RELEVANCY SCORE 80.4

Well, I thought my nwifi.sys BSOD's had stopped, but apparently not. It seems to happen when there is very high network traffic. Included are the dump files. Any help is greatly appreciated.

A:nwifi.sys BSOD. Dump Files Included.

This crash was probably caused by nwifi.sys which is part of win 7's wifi setup

I would run a system file check
type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/"

Let us know if you need help

Ken

Read other 3 answers
RELEVANCY SCORE 80.4

Hey Guys,

I have been experiencing a really werid issue I cannot figure out. I was hoping you could give me a hand in identifying the culprit.
Its hard to get the issue fixed because it happens at random intervals it can happen twice a week then not happen for a month.

-When the issue occurs all 3 screens freeze and the image is the same as the moment it stopped working
-Windows doesnt respond to ctrl+alt+del
-Most of the time there is a buzzing sound from the speakers
-Upon reboot the system does 1 of 3 things:
1.reboots like nothing happened (most of the time),
2.the system wasn't closed properly please choose: safe mode or normal
3.overclock failed and i get booted into the asus visual bios (i change nothing while in bios) leave and reboot works fine.

Other background info in the time I have experienced the problem I have checked temps on cpu cores and they always look fine....
I have changed the GPU, SSD (windows drive) and added a Sound Card none of these changes affected the issue as it is still present at random.


Thanks for the help

System info:
Motherboard
Asus p8z68-v PRO

Processor
2500k @ 4.5ghz with corsair a70 cooler.

Memory
16gb G.SkillRipjaws X

Video Card(s)
XFX Reference R9 290 4gb

Hard Drive(s)
Samsun 250gb SSD (boot)
Hitachi deskstar 7300k 2tb (secondary)

Optical Drive(s)
Sony DVD

Case
CM 690 Advanced II

Power Supply
corsair tx750m

Sound Card
Asus Xonar

Monitor
3xu2311
Operating SystemEdit Value... Read more

A:BSOD - Dump files included error:

Additional information is required.

1. Download this .BAT file to your desktop

2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

Read other 8 answers
RELEVANCY SCORE 80.4

Hey there Guys and Girls,

Recently i built my own pc from ground up to my own likings and word of mouth, reviews of certain products etc.

My system is no longer then about 3 weeks old now and i have not installed one 2nd part either, all brand new so it frustrates me to get such a bad error so ive turned to you guys to hopefully guide me in the right direction on how to fix this issue once and for all, i appreciate anyones contribution in advance and apologize if i had forgot to post something or specs about my pc, if i have so please notify me.

Few General Specs and Info firstly:

Running Windows 7 pro ultimate x64

Custom built pc so just installed current OS on the system
OEM version

- What is the age of system (hardware)? = not older then 3 weeks out of the box brand new for everything

- What is the age of OS installation? = 1st install and Installed same time as build date, no longer then about 3 weeks now

As my anti-virus im using Kaspersky Internet Security 2012 - lastest version

DUMP FILES AND EVERY OTHER IMPORTANT FILE in the zip file >> attachedAttachment 186235

Specs;

CPU: Intel i7-2600k
Motherboard: ASRock Fatality Z68 Professional Generation 3
RAM: Viper Xtreme 4x4GB cards = 16GB total
Harddrive: Western Digital 1TB (7200rpms i think)
Graphics card: 1GB DDR5 Gigabyte AMD Radeon HD 6800 series (though im pretty sure its 6850 but just says 6800 in device manager)
Sound: Built-In though i use Logitech G35 headset via usb
Case: Antec 85
Cooling System... Read more

A:BSOD while playing BF3, Dump files etc included

Four different reported causes.

USBaudio, directX, Rt64win7.sys, and one inconclusive.
I am betting they all refer to your Kaspersky.
I do notice Kaspersky which is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials at least to test.

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

Read other 6 answers
RELEVANCY SCORE 80.4

Been getting seemingly random BSOD only thing i've changed recently was my logitech drivers for my mic, changed those back to the originals and still crashing.

Ran diags on hard drive, motherboard and ram and all seem to be working fine so im back to thinking its driver related, don't know an awful lot about software related problems so any advice would be greatly appreciated

Thanks,
Jack

A:BSOD 0x0000000f4 dump files included

Hello GenericGrim, Welcome to SF

First off if your OCing in anyway stop, return everything to stock settings for the purposes of testing

If you havent already, fill in your system specs so we know what we are dealing with
System Info - See Your System Specs

Run some scans to check against virus or infection
Anti-rootkit utility TDSSKiller
Windows Defender Offline


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck C2, {7, 109b, 402003d, fffffa8007e8e3e0}
*** WARNING: Unable to verify timestamp for ZyxelUDSMBus.sys
*** ERROR: Module load completed but symbols could not be loaded for ZyxelUDSMBus.sys
GetPointerFromAddress: unable to read from fffff800038b5100
GetUlongFromAddress: unable to read from fffff800038b51c0
Probably caused by : ZyxelUDSMBus.sys ( ZyxelUDSMBus+4a43 )
Followup: MachineOwner
---------
5: kd> lmvm ZyxelUDSNBus
start end module name
5: kd> lmvm ZyxelUDSMBus
start end module name
fffff880`00e16000 fffff880`00e2e000 ZyxelUDSMBus T (no symbols)
Loaded symbol i... Read more

Read other 6 answers
RELEVANCY SCORE 80.4

Laptop with 64bit win 7

mostly getting this when i play league of legends, but system crashes out on me.

please help if you can.

4 gb ram.
I7 processor
alienware laptop
 

Read other answers
RELEVANCY SCORE 79.6

Hi there,

I'm having a big issue, basically I'm getting a BSOD every few minutes, on a new PC.

~ It wasn't doing that from the beginning.

I've included the entire content of the Minidump folder, if someone could look into it and assist in sorting that out, would highly appreciate it.



Thanks in advance

A:BSOD every few minutes, brand new PC ~ Dump files included.

Blue Screen of Death (BSOD) Posting Instructions

Read other 5 answers
RELEVANCY SCORE 79.6

Hi there,

I'm having a big issue, basically I'm getting a BSOD every few minutes, on a new PC.

~ It wasn't doing that from the beginning.

I've included the last dump file in the dump folder, as I can't seem to be able to upload a .rar file.
MEMORY_MANAGEMENT 0x0000001a 00000000`00000403 fffff680`0003dbc0 f0200000`87e78867 fffff8a0`085ebcf8 ntoskrnl.exe ntoskrnl.exe+6f880 x64 ntoskrnl.exe+6f880
Thank's a lot in advance.
 

A:BSOD every few minutes, brand new PC ~ Dump files included

Go to C:\Windows\minidump. Select all the .dmp files and right-click, sending the files to a compressed(zipped)folder. Upload this folder as a file here...
 

Read other 3 answers
RELEVANCY SCORE 79.6

Hi,
I have a hp laptop dv6-3042tx and yesterday i got the BSOD, here are the attachments below from the "BSOD-Posting Instruction" and also i also attached a image of the BSOD itself.

This laptop is x64, operating on Windows 7 Home Premium, running on OEM, the age of the system and OS is about 9 months.

Thank you in advance

A:BSOD on HP Laptop (Dump Files, Photo Included)

  
Quote: Originally Posted by issh


Hi,
I have a hp laptop dv6-3042tx and yesterday i got the BSOD, here are the attachments below from the "BSOD-Posting Instruction" and also i also attached a image of the BSOD itself.

This laptop is x64, operating on Windows 7 Home Premium, running on OEM, the age of the system and OS is about 9 months.

Thank you in advance



The cause of this crash was probably;
Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

I would do the following to diagnose and repair it.

1-Memory test
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

2- A system file check
Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

3- update the old drivers
Let us know the results
Jan


Old Drivers

Code:
000.fcl fffff880`0823f000 fffff880`0826a000 0x0002b000 0x48dcdf7a 26/09/2008 11:11:22 PM
spldr.sys fffff880`01675000 fffff880`0167d000 0x00008000 0x4a0858bb 12/05/2009 2:56:27 AM
GEARAspiWDM.sys fffff880`055a3000 fffff880`055b0000 0x0000d000 0x4a1151c0 18/05/2009 10:17:04 PM ... Read more

Read other 5 answers
RELEVANCY SCORE 79.6

I just got this laptop last week. It's a HP envy 2090-nr. I used my anytime upgrade and upgraded it to 7x64 ultimate. Windows is updated and so are the HP drivers to the best of my knowledge. The system is less than a month old. The problem seems to happen when I have the HDMI plugged in and or when there is something on the left side usb port. I'm not sure if its just a random coincidence because I havent had this laptop that long.

Link to laptop:
Micro Center - Hewlett-Packard Envy 17-2090NR Laptop Computer - Carbon Relic LV045UA#ABA

Specs:
Intel? Core? i7-2630QM
8GB DDR3 RAM
17.3" Full High-Definition 3D Ultra BrightView Infinity LED-backlit Display
Intel? WiDi
(2) 750GB 5,400RPM Hard Drives
Blu-ray Player & SuperMulti DVD Burner
5-in-1 Digital Media Reader
AMD Radeon HD 6850M
10/100/1000 Network
802.11a/g/n Wireless
Bluetooth

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000004
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF... Read more

A:BSOD hp envy 17 laptop (dump files included)

  
Quote: Originally Posted by jorpe


I just got this laptop last week. It's a HP envy 2090-nr. I used my anytime upgrade and upgraded it to 7x64 ultimate. Windows is updated and so are the HP drivers to the best of my knowledge. The system is less than a month old. The problem seems to happen when I have the HDMI plugged in and or when there is something on the left side usb port. I'm not sure if its just a random coincidence because I havent had this laptop that long.

Link to laptop:
Micro Center - Hewlett-Packard Envy 17-2090NR Laptop Computer - Carbon Relic LV045UA#ABA

Specs:
Intel? Core? i7-2630QM
8GB DDR3 RAM
17.3" Full High-Definition 3D Ultra BrightView Infinity LED-backlit Display
Intel? WiDi
(2) 750GB 5,400RPM Hard Drives
Blu-ray Player & SuperMulti DVD Burner
5-in-1 Digital Media Reader
AMD Radeon HD 6850M
10/100/1000 Network
802.11a/g/n Wireless
Bluetooth

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000004
BCP2: 0000000000000002
BCP3: 0000000000... Read more

Read other 6 answers
RELEVANCY SCORE 78.8

so i've been getting BSOD for about a month and i could use some help please?

Im ok with computers but im no wiz.

SF_25-12-2013 - Speedy Share - upload your files here

A:BSOD Windows 7 Home Premium(Dump Files Included)

  
Quote: Originally Posted by Matty1228


so i've been getting BSOD for about a month and i could use some help please?

Im ok with computers but im no wiz.

SF_25-12-2013 - Speedy Share - upload your files here


A bit more info is needed such as what exactly is the problem(more details) and what steps if any were taken to resolve the issue

Also; that link you posted above does not work as it says file is not found.

Read other 8 answers
RELEVANCY SCORE 78.8

Hi everyone,

Recently bought a MSI Dragon Edition 2 for gaming, keep getting BSOD and tried returning it to get told
they can only repair it. ( will ship to America to get serviced, in Saudi Arabia, don't trust these people )
So I'm stuck with it! Was going to take it back for an Alienware 18x.
I can't bring it to get it serviced because I work overseas and won't be home until the middle of Jan.

description Of Problem:

I get BSOD at random times, yes random times not app related. I can let it crash and restart, and not even log into my computer and it will eventually crash with BSOD from the log in screen!

System Specs:

Computer Brand - MSI GT70 Dragon Edition 2
CPU - Intel? Core? i7 Processor
Operating System - Windows 8.1
Chipset - Intel? HM87
Memory - DDR3L up to 1600MHz, 4 slots, Max: 32GB
Graphics - Nvidia GeForce GTX 780M
Graphics VRAM - GDDR5 4GB
HDD (GB) - Up to 384GB Super RAID 2 + 750GB HDD 7200rpm
Wireless LAN/LAN - Killer DoubleShot

Things That I Have Tried:

- System Restore
- Updating All Drivers (From Manufactor Websites)
- Revert to Drivers from MSI's website (Outdated)

Things I've Installed:

- Steam
- Origin
- BF4
- COD Ghost
- Sim City 5
- Need for Speed Rivals
- Mobily (Software for internet dongle)
- AutoCad 2013

Windows Debugger x64 Bit Found:

Files are from minidump folder.

- IGDKMD64.SYS
- NTOSKRNL.EXE
- USBEHCI.SYS
- TCPIP.SYS

Help is much appreciated.

Thank you,
Bailey

A:BSOD, At Random Times. Included Mini Dump Files.

Hello Bailey, and welcome to Eight Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by afterwards to further help.

Read other 3 answers
RELEVANCY SCORE 78.8

Hey ladies and gentlemen and thanks to anyone in advance,

I was playing Arma III installing some server side stuff for a modded server, I saw a firewall pop up but didn't worry about it (not sure if it has anything to do with the crashing at all). I played on for a few minutes then the game froze i saw some rainbow colours, i restarted my pc and cannot access it unless i am in safety mode. A big thing to note is strange green pixelations in my background about 5-10 pixels wide and1-3 high almost looks like code from the matrix haha hopefully that itself might answer the problem if not!;

So far I have tried:

Clean restart
going into BIOS at boot up and running the trouble shooter through there.
Rolling back my drivers

I for some reason have no saved dates to go back to for a simple reconfig from a prior date.

After as much amateur fiddling around as i can i have a suspicion that my GFX card is fried but as I am not an expert id love to have a definitive idea of the problem so i can get it fixed!

Once again thanking anyone in advance!

A:BSOD error 7001 SF diag and dump files included

BUMP

Anyone please

Read other 1 answers
RELEVANCY SCORE 78.8

Hello SevenForums
I've had some issues with BSODs in the past but they would be infrequent enough to not bother me. When I say infrequent I mean 0-2 times a week at max.

I currently play FFXIV regularly on my computer and have been playing it fine up till now. Ever since a patch yesterday, I have experienced several BSODs. Two of them were only 5 minutes apart. I was wondering if the forum could help me get to the bottom of this. I've never been much of a software guy when it comes to tech so I could really use some help.

I have attached my dump files below.

A:BSOD while playing FFXIV patch 3.05 (Dump files included)

You're experiencing 0x101s which are pretty difficult to diagnose. They can be down to a driver, BIOS bug or a possible hardware defect. No drivers are evident in these dumps.
Code:
CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88003165180, The PRCB address of the hung processor.
Arg4: 0000000000000002, 0.
I think the first step would be to update the BIOS. The lastest version on the ASUS support page for your board is dated May 2015. Can you take that as the first step and then use the rig as normal to see if the issue persists.
Code:
0: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.8, DMIVersion 39, Size=3045]
BiosMajorRelease = 4
BiosMinorRelease = 6
BiosVendor = American Megatrends Inc.
BiosVersion = 1104
BiosReleaseDate = 07/16/2014
SystemManufacturer = ASUS
SystemProductName = All Series
SystemFamily = ASUS MB
SystemVersion = System Version
SystemSKU = All
BaseBoardManufacturer = ASUSTeK COMPUTER INC.
BaseBoardProduct = MAXIMUS VII HERO
BaseBoardVersion = Rev 1.xx
Can you also boo tinto BIOS and check the values of your 3.3V, 5V and 12V rails please.

Do you monitor temperatures at all? It would be good to know your CPU and GPU temper... Read more

Read other 1 answers
RELEVANCY SCORE 78

i am getting bsod of iobuildpartialmdl.... something like this...... 0x0000012e......
i have even tried updating the network driver...... still....... the main thing is..... when i run torrent clients.... like vuze, utorrent,tixati,bittorrent....... i am getting...... please help me...

windows 7 ultimate x64
intel core i3 540 ocd 3.7ghz
transcend 2x2=4gb ram
500gb seagate hdd
intel dh55tc mobo
sapphire radeon hd 5750

A:BSOD!! windows 7.. 0x0000012e. dump files included.. netwrk driver upd

Avast can be a contributing cause of BSOD'S . Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
Related to RTCore64.sys MSI Afterburner from Micro-Star Int'l Co. Ltd. yours 2005 updatw to newest

Read other 2 answers
RELEVANCY SCORE 76.8

Hey,
when I play games My PC crashes to BSOD But no restart just the Blue screen with kind of ahhhhh sound but when restarted the pc works fine I've updated all my driver got all games patches and made sure my PC can run them with no problem here is my SPEC and dump files

Motherboard
Manufacturer FOXCONN
Model Inferno Katana GTI

CPU

CPU Name Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz
CPU Code Name Lynnfield

RAM

Maximum Capacity 4096 MBytes
Maximum Memory Module Size 4096 MBytes

PCI

Video Adapter AMD Radeon HD 6800 Series
Video Processor ATI display adapter (0x6739)

HDD

Manufacturer Western Digital
Model WDC WD10EARS-00Y5B1
Size 1000.2 GB

OS
windows 7 Ultimate x64 (Full retail)
Updated to the latest microsoft update

Age of hardware 2 months
age of OS 2 month

health report and jcgriff2 report are in attachment
TEST Results

1. Memtest86 - Run for 7-8 passes ( ran for 9 passes no problems )
2. Prime95 - Run all three tests for 3-4 hours each or until fail (crashed PC WITH BSOD )
3. Hard drive scan using SeaTools ( first test pass second test failled)

A:BSOD When Playing games-(tryied every thing online-Dump files included

Please upload a full jcgriff2 report
http://www.sevenforums.com/crashes-d...tructions.html

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat May 28 12:04:56.983 2011 (UTC - 4:00)
System Uptime: 0 days 7:15:22.014
Probably caused by : ntkrnlmp.exe ( nt!KiSwapContext+7a )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_4_nt!KiSwapContext+7a
BiosReleaseDate = 08/31/2009
SystemManufacturer = FOXCONN
SystemProductName = Inferno Katana GTI
CPUID: "Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz"
MaxSpeed: 2800
CurrentSpeed: 2806
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun May 15 10:05:16.548 2011 (UTC - 4:00)
System Uptime: 2 days 0:04:08.533
Probably caused by : memory_corruption
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.
BUGCHECK_STR: 0x7a_c000000e
PROCESS_NAME: BlackOps.exe
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_LARGE_4096
BiosReleaseDate = 08/31/2009
SystemManufacturer = FOXCONN
... Read more

Read other 8 answers
RELEVANCY SCORE 66.4

I am having random lockups. I would appreciate if someone could look at the attached dump files and let me know what is going on.
Thanks

Win 7 64 bit full retail version
4 month old custom built

A:Random lockups- dump files included

Hi, RT; and welcome to the forum from another Floridian.





Quote:
Error code 9F, DRIVER_POWER_STATE_FAILURE. Usual causes: Device driver.

Error code 7F, UNEXPECTED_KERNEL_MODE_TRAP. Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack.


I recommend that you uninstall Zone alarm using this removal tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is a well known and documented cause of BSOD's on many Win 7 systems. Make sure Windows Firewall is turned on. Reboot and let's see if this solves the problem. Please update us and let us know. If you get another BSOD after uninstalling ZA, please upload the dump.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c4f000 PsLoadedModuleList = 0xfffff800`02e8ce50
Debug session time: Fri Nov 5 12:27:24.231 2010 (GMT-5)
System Uptime: 3 days 20:54:12.932
Loading Kernel Symbols
...............................................................
................................................................
............................... Read more

Read other 1 answers
RELEVANCY SCORE 66.4

Hi everyone,

My PC has been getting a lot of BSOD's lately, and sometimes just plain crashes on startup. I've reformatted several times, and the problem keeps coming back. I thought it might be faulty RAM, so I ran Memtest, which showed that one of my sticks was faulty (I had 3 x 2GB DDR3 RAM). I took 1 stick out, and ran memtest again, and it showed no errors after 10 passes. I reinstalled windows again, and I've still been getting BSODs.

I've attached the files required by the BSOD posting instructions thread.

I'm running:
Windows 7 x64 OEM
Hardware is only about 6 months old.
Running an almost fresh install of windows ATM

A:Repeated BSODs, Dump files included

-BUMP-...any ideas anyone?

Read other 3 answers
RELEVANCY SCORE 66.4

hello all, i'm having some problems with my computer. this seemed like the right place to come. 1 of 2 things always happens, a. BSOD on load with irql not less or equal message, b. pc locks up on load. i can still access safe mode. thanks in advance.
 

A:irql not less or equal. dump files included

Howdy,

All but one was: Probably caused by : ntoskrnl.exe
I would do a Memory test first, http://www.memtest86.com/download.html....

if that passes then do a Hard drive diagnostics on the Hard drive using the Diagnostics tool that will be found on the Manufactures site.
 

Read other 1 answers
RELEVANCY SCORE 66.4

I was hoping someone could help me out here. I recently upgraded from XP 32 to Win7 64 and am now experiencing frequent blue screen crashes. No new hardware other than 4 GB of memory that was already installed is now being accessed. Since it was a clean OS installation I've installed plenty of various programs and drivers.

This is the most recent error message.

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 (0xfffffa0008c9ac90, 0x0000000000000001, 0xfffff80002ee07c4, 0x0000000000000007). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 052110-15990-01.

Dump files are attached. I'd appreciate any help I can get.
 

A:Win 7 Blue Screen, dump files included

Read other 6 answers
RELEVANCY SCORE 66

can someone tell me why?

A:BSOD dump included

Code:
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
Disable Driver Verifier and tell us if you continue to get BSOD's.?
Remove ESET using its removal tool: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Replace with Microsoft Security Essentials and Malwarebytes which are recommended from a strict BSOD perspective. Run a full scan with both (separately) once downloaded, installed and updated. Microsoft Security Essentials, Free antivirus for windows
Malwarebytes Anti-Malware FreeGood and Free system security combination


   Information
DO NOT start the free trial of MalwareBytes. Unselect the option when prompted.

Read other 1 answers
RELEVANCY SCORE 66

64 bit, full retail.
Hardware is 1 month old (built myself)
OS was installed when I built it from a USB drive (did not include an optical drive in the build)
SPECS:i5 2500k
ATI 7850 GPU
corsair tx650 PSU
ASRock Extreme3 Gen3 motherboard
Corsair vengance 1600 ddr3 ram (2x4gb)
Coolermaster hyper 212 cooling unit
500gb Western Digital HD
64gb Crucial M4 ssd (OS is installed on this drive)
It was working fine the first 3 weeks I had the build, then I went on a vacation for a week. I come back, and the thing BSODs on me 6 times in an hour and a half.

First thing I tried was setting clocks back to normal (was at 4.3ghz on the i5, went back down to 3.3ghz) and it was stable for like 45 minutes after I did that, but it then crashed again. Also did a memory diagnostic test and everything was supposedly good.

My max temps with prime95 now are like 37 degrees celsius with RealTemp because I have the coolermaster hyper 212 as opposed to the stock cooler, so it shouldnt be crashing due to over heating.

Also: first crash occured firing up minecraft.

Thanks for any and all help guys.

A:BSOD semi-randomly. Self built computer. (BSOD dump.zip included)

Quote:
Also did a memory diagnostic test and everything was supposedly good.


Using which tool/software? You should run Memtes86+ for at least 7 Passes (Test each RAM stick individually)
RAM - Test with Memtest86+
Your BSODs are RAM/Memory related, rest your RAM settings to their default values in your BIOS. Stop any overclocking if any.

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling.

Post back with your results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CACHE_MANAGER (34)
See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050853
Arg2: fffff88018cbc7a8
Arg3: fffff88018cbc000
Arg4: fffff80001ede67c

Debugging Details:
------------------
EXCEPTION_RECORD: fffff88018cbc7a8 -- (.exr 0xfffff88018cbc7a8)
ExceptionAddress: fffff80001ede67c (nt!CcLazyWriteScan+0x0000000000000188)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00... Read more

Read other 1 answers
RELEVANCY SCORE 66

I've been having BSoD's for well over a year now, once or twice almost every day. I've tried multiple times to figure out whats wrong but... I dont have ANY dump files.

I've followed instructions on how to enable them but it still doesn't create a file. Im really hoping you all can help me out here.

The current settings are:
Page files on both hard drives enabled.
Set custom page size to 17000MB-20000MB
System managed size and no paging file boxes are unchecked
Write an event to system log box checked
Automatically restart unchecked
Debug information set to small memory dump/kernal. Both settings dont work
Overwrite existing file box is greyed out when debug is set to small memory. Checked when set to kernal
Small and kernal memory dump location set to C:\Windows\Minidump and C:\Windows\Memory.DMP I created these folders as they were not present

I got a SSD awhile back and use it for my windows. However i didnt reformat my other hard drive and windows is still installed on the old one however i boot from the SSD (maybe this is some how the problem)

Im using WhoCrashed from Resplendence Software - Advanced System Tools and Developer Components to force a BSoD when trying to creat a dump file.

There are NO files in either folder. Both on the SSD or old hard drive.

I've searched many forums now and found others with what seems to be the same problem but with no solutions. I would VERY much appreciate the help!
The BSoD's seem to mostly happen when play... Read more

A:No dump file after BSoD. Dump files ARE enabled

Wrote stuff that was wrong. Ignore this reply

Read other 9 answers
RELEVANCY SCORE 66

Please see attached dumb files (zip), I have ran disk check and repair, checked Lenovo for driver updates and ran all, machine is an engineering laptop i7 - 8GB RAM. Swapped RAM and if the hard drive is placed in a similar machine it will eventually do the same thing. Also ran Lenovo hardware test and it came back clean.

A:Machine reboots while under load, dump files included

Hi ahamaduhhs,

We need more information to analyze your logs. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

Read other 7 answers
RELEVANCY SCORE 66

Hi, you might remember me from such other threads as:

Irregular boot up

Anyway...I am following a thousand instructions, suggestions and tips and I'm starting with this one...even managing to follow the BSOD Posting Instructions was a challenge in itself.

Here's some details:
- Windows 7 Home Premium 64
- Original installed OS is on the system
- Full retail version
- Bought whole system (you can see in 'my system specs') 2 weeks ago
- OS install 2 weeks old

Further:

I started with the default bios for the Rev2 version of this mobo. Since then...in an effort to a) have the system recognise all ram and b) cure BSOD....I have flashed bios from original (which I think was FA) to FB...and then on to FC1.

FA gave me no BSOD...but it would not recognise all ram
FB recognised all ram but gave me BSOD
FC1 recognises all ram but gives me frightening BSOD

BSOD are coming only on cold boot.

The specs for my ram in detail are:
AX3U 1600GB2G9-1G
DDR3 1600G(9) 2Gx16
Gaming Series
Voltage: 1.55v-1.75v
cl: 9-9-9-24
A70-090131

Please find attached the Windows NT6 BSOD jcgriff2 file which includes the html report files.

Cpuz images:
Some temps:
Any insights into this from anyone in the know could really be helpful.

If any more information is needed please let me know.

thanks

A:x58A-UD3R - included: Dump & System files

Hi, hello people.





Quote:
Error code 50, PAGE_FAULT_IN_NONPAGED_AREA. usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Error code C2, BAD_POOL_CALLER. Usual causes: Device driver, ?Memory

Error code 7E, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control

Error code 24, NTFS_FILE_SYSTEM. Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Error code 1A, MEMORY_MANAGEMENT. Usual causes: Device driver, memory, kernel


All of these dumps point to a hardware or hardware related problem.


Code:
Kernel base = 0xfffff800`02a5f000 PsLoadedModuleList = 0xfffff800`02c9ce50
Debug session time: Sat Oct 9 21:26:20.905 2010 (GMT-4)
System Uptime: 0 days 0:00:11.966
Loading Kernel Symbols
...............................................................
.............................................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 65.2

Hi all,

I was playing LAN in my appartment when I suddenly BSODed.
Is there anyone who could make out why from the dump file ?

My specs are:
i7 intel.
Win 7 64
8 Bg Ram
Geforce 850

A:BSOD, one dump file included

  
Quote: Originally Posted by dancodan


Hi all,

I was playing LAN in my appartment when I suddenly BSODed.
Is there anyone who could make out why from the dump file ?

My specs are:
i7 intel.
Win 7 64
8 Bg Ram
Geforce 850


Yes

Hi and welcome

You seem to have two problems. One old drivers.

These need to be updated


Code:
secdrv.SYS fffff880`07f41000 fffff880`07f4c000 0x0000b000 0x4508052e 9/13/2006 8:18:38 AM
LVUSBS64.sys fffff880`04c6c000 fffff880`04c78900 0x0000c900 0x45ee07ec 3/6/2007 7:31:40 PM
Rtnic64.sys fffff880`047e7000 fffff880`047f9000 0x00012000 0x48401957 5/30/2008 10:12:23 AM

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\022010-20451-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c0d000 PsLoadedModuleList = 0xfffff800`02e4ae50
Debug session time: Sat Feb 20 13:01:19.990 2010 (GMT-5)
System Uptime: 0 days 3:08:51.004
Loading Kernel Symbols
................. Read more

Read other 2 answers
RELEVANCY SCORE 65.2

Please someone analyze this dump file caused BSOD:

A:Bsod =( [dump file included]

BUMP!
Please someone analyze it

Read other 8 answers
RELEVANCY SCORE 65.2

why did i get this bsod?

A:BSOD (DUMP file included)

Your dump blame Kaspersky (klif.sys) and a WinMount software

-Remove WinMount

You are using an old version of Kaspersky
The kl1.sys and klif.sys BSODs were known issues in the older 11.0.1.xxx versions, update to 11.0.2.556(with patch b) by uninstalling the current version and download the latest one

-Uninstall completly Kaspersky
-Install new version
Product Updates

Code:
BugCheck A, {89f2aff8, ff, 1, 82c841ed}

*** WARNING: Unable to verify timestamp for WMDrive.sys
*** ERROR: Module load completed but symbols could not be loaded for WMDrive.sys
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
Probably caused by : WMDrive.sys ( WMDrive+860 )

Read other 9 answers
RELEVANCY SCORE 65.2

Helo
Looking for help with a bsod I had while a game was pushing things pretty hard I have no Debbugging experience or know how So possible links to begginners guide to debugging and understanding outputs would be appreciated also.
Have run memtest 86 scandisk for files and sectors on previous install (before doing a repair instal) All passed well.
What led me to the repair instal was a corrupted file problem that even dvd disk known to be good came back as corrupted by my OS.
I noticed cannot recal where I read something about another user having exact same trouble and he seemed to pinpoint it to Windows firewall being up while Windows update ran seemed to re corrupt his file system so I have avoided That Scenario.
AN advance thanks for any help Out to you people
THANKYOU
Brian
* System Specs on my User profile

A:Ntfs on Bsod Dump included

NTFS errors are related to the file system stored on the hard drive.
Most often it can be fixed by running Startup Repair.
You can also run a hard drive diagnostic to test the physical hard drive(s)
RAID will enter into this also - if there's some issue with the array/drivers (so you may want to update them also).

Running the dump file as I type this.....

Yes, this is an error in NTFS.sys - and it happened in your GData antivirus (so that just adds to the mix). Also, you've got several older drivers on your system that could be contributing to this. I suspect that it's the incompatibility with the RAID drivers that is the root cause here - with the NTFS error being caused by minor issues with the Game Controller device. I wouldn't worry about the GData antivirus at this point, just keep it in mind if it raises it's head in future memory dumps.

Please note that the ctgame.sys driver is from 2004 - I'd be very concerned about it's compatibility w/Win7. It belongs to a Creative Gameport device. There were some issues with this device in Vista, so I'd suggest reading this post if you have difficulties with it: http://www.yougamers.com/forum/showthread.php?t=40663

Also, there are issues with some RAID controllers in Win7 - so it's advisable to have the latest Win7 drivers (Vista drivers may not work correctly - I had this bug in my RAID controller drivers).

Here's the drivers:

Code:
ctgame.sys Tue Apr 06 20:42:49 2004 Creative Game Port
SI3112.sys Thu Jun 28 1... Read more

Read other 3 answers
RELEVANCY SCORE 65.2

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS2\Minidump\Mini031609-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0xfffff800`01000000 PsLoadedModuleList = 0xfffff800`011d71a0
Debug session... Read more

A:BSOD's & Dump file included

Sorry for bumping, but any help would be appreciated. I did alot of ground work...but I basically tried everything I could as my posts show above.

From what I can tell, all of it points to a Software issue. Though, I can't determine what exactly caused this, as it was not BSODing prior to be receiving a Trojan, that I promptly removed and no traces have been found of any more(AD-Aware, Spybot S&D, NOD32, SuperAntiSpyware, MalAware remover)

Interesting to note, upon re-installing NOD32, when I restarted Windows, I got a "Microsoft has recovered from a serious error" prompt, three times, and the EVNTVWR had this to state:

Error code 0000000000000050, parameter1 fffff98396d99000, parameter2 0000000000000000, parameter3 0000000000000000, parameter4 0000000000000004.

Three times.
 

Read other 3 answers
RELEVANCY SCORE 65.2

My computer often shut down by it self when not in use. It might be a windows sleep issue, but i have yet to figure out whats causing this behavor. Can anyone point me in a direction by the log files attached?

Thanks for taking the time to help!

A:BSOD - when idle, zip dump included

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800e9f0860, fffff80000b9c3d8, fffffa8009793010}

*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
Probably caused by : EtronHub3.sys

Followup: MachineOwner
---------
0: kd> !irp fffffa8009793010
Irp is active with 6 stacks 4 is current (= 0xfffffa80097931b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800e476050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\rtwlanu.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for r... Read more

Read other 1 answers
RELEVANCY SCORE 65.2
A:BSOD (DUMP file included)

BSOD caused by a Kaspersky product(kl1.sys), This is a know problem in the older versions. Uninstall the product using the Removal tool then download the latest version 11.0.2.556
Product Updates

Code:
Unable to load image \SystemRoot\system32\DRIVERS\kl1.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kl1.sys
*** ERROR: Module load completed but symbols could not be loaded for kl1.sys
Probably caused by : kl1.sys ( kl1+422df )

Read other 2 answers
RELEVANCY SCORE 65.2

Hi.. recently brought a new pc with the following specs:
920 @ 3.8 ghz
Asus P6TD Deluxe
6 GB DDR 1600 Corsair
Asus Xonar D2
ATI 5870.

but been having a bsod of 0x00000124..well i say bsod, screen goes grey/black lines in middle of WoW(found the error code via bluescreenview, presuming after a google search that found you guys thats it the overclock not being as stable as i thought? have reverted to stock for now, but still would like some inport, have also e-mailed the company i brought it off, but as it's the weekend thought it'd give this a shot dump is below.
103009-16536-01.rar

A:Bsod: 0x00000124 Dump included.

  
Quote: Originally Posted by Carlow


Hi.. recently brought a new pc with the following specs:
920 @ 3.8 ghz
Asus P6TD Deluxe
6 GB DDR 1600 Corsair
Asus Xonar D2
ATI 5870.

but been having a bsod of 0x00000124..well i say bsod, screen goes grey/black lines in middle of WoW(found the error code via bluescreenview, presuming after a google search that found you guys thats it the overclock not being as stable as i thought? have reverted to stock for now, but still would like some inport, have also e-mailed the company i brought it off, but as it's the weekend thought it'd give this a shot dump is below.
103009-16536-01.rar


Hi carlow and welcome to sevenforums

this dump was caused by hardware. either an incompatible device or bad driver.

I assume you are not

Over clocking

Running a RAID

download and run an app like memtestgx86 preferably overnight

Update the bios,

run a system file check byt typing cmd in search>right click and run as admin.
type sfc /scannow

let us know if this doesnt help
Ken
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\103009-16536-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer Sing... Read more

Read other 4 answers
RELEVANCY SCORE 65.2

SOLVED
After testing it for over a month, I can say for sure that the power supply was the cause. Changed it with a 450w one and ever since then, the pc is working great.
For anyone who can't open up his PSU or doesn't want to risk by doing it to check the capacitors, go to bios and check your voltages. Any voltage in red means that either a cable is not plugged in perfectly, or a capacitor has leaked.

Special thanks to axe0 and Ztruker for helping me!

Hello.
For some reason my pc keeps on crashing lately when I am watching youtube videos or gaming (screen going black and hearing some buzzing sound) and after a few seconds it reboots. This happens randomly. It can happen in 5 minutes or even in 10/24 hours.
Here is a screenshot of event viewer with a critical error which appeared exactly when the pc crashes. Here's a screenshot of that critical event. http://i.imgur.com/Ysejgqk.png

Following that error there are a few more events and among them are a few error events. After the pc is rebooted, it appears another error event which is saying "The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xffffe00001ccb038, 0x0000000000000000, 0x0000000000000000). " and has a dump file attacked to it. Here's a screenshot of it. http://i.imgur.com/ydumKiP.png
Here's the dump file. I've uploaded it on tinyupload because I couldn't find how to attack it here. http://s000.tinyupload.com/index.php?file_id=9405473... Read more

A:Computer crashing. Event logs and dump files included.

Are you overclocking? The dump shows a machine check in AuthenticAMD which is a hardware failure.

Read other 10 answers
RELEVANCY SCORE 65.2

SORRY if I posted this in the wrong section!!!

Hello.
For some reason my pc keeps on crashing lately when I am watching youtube videos or gaming (screen going black and hearing some buzzing sound) and after a few seconds it reboots. This happens randomly. It can happen in 5 minutes or even in 10/24 hours.
Here is a screenshot of event viewer with a critical error which appeared exactly when the pc crashes. Here's a screenshot of that critical event. http://i.imgur.com/Ysejgqk.png

Following that error there are a few more events and among them are a few error events. After the pc is rebooted, it appears another error event which is saying "The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xffffe00001ccb038, 0x0000000000000000, 0x0000000000000000). " and has a dump file attacked to it. Here's a screenshot of it. http://i.imgur.com/ydumKiP.png
Here's the dump file. I've uploaded it on tinyupload because I couldn't find how to attack it here. http://s000.tinyupload.com/index.php?file_id=9405473668...
Anyone knows what the cause might be? Mb not sending power to the components? Faulty PSU? anything else? My budget is extremely limited so I have to find out exactly which component is causing this problem.
Also, does the dump file say anything what the cause might be?

PS: CPU and GPU temps are fine around 50-55 during gaming. I have tried all possible driver versions for every component. Tried it on windows 7 8... Read more

Read other answers
RELEVANCY SCORE 64.8

Hi there im having problems with my window 7 getting reccuring BSOD! I think it is a driver issue but not sure which drivers. Any help would be much appreciated!

The computer in question has had problems in the past. The overclock failed after 1 week. reset to default setting and started to run smoother. I dimm of RAM is broken so it is a 64bit machine running on 2GB of RAM

the error seems to happen at random times as I ran prime95 medium test for 12 hours without BSOD! so I have no clue where to start!
Here is the error report and I will include a zip with the crash files.
Thanks in advance
Josh

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 50
BCP1: FFFFF6FB76FB41F8
BCP2: 0000000000000000
BCP3: FFFFF80002AB2F4C
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\091810-29078-01.dmp
C:\Users\simon\AppData\Local\Temp\WER-47939-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD Locale ID = 2057 Dump included

No firm information from the single memory dump file. Please zip up and attach ALL the memory dump files!
Also, please include this info from the pinned topic at the top of the forum: http://www.sevenforums.com/crashes-d...tructions.html

Please run Driver Verfier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list"... Read more

Read other 3 answers
RELEVANCY SCORE 64.8

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS2\Minidump\Mini031609-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows Server 2003 ... Read more

A:[SOLVED] BSOD's &amp; Dump file included

To update this issue, I got a BSOD after starting fraps. It was a nv4_disp.dll error. Then I remembered, the two times I BSOD'ed nv4_disp was with FRAPS. So I played the game normally without Fraps, and for 3-4 hours, no BSOD or crash or anything. Interesting, as Fraps never affected me like this before. It comes to my attention though, that since this is my new XP boot, that I also have a NEWER version of Fraps, and that clicked in my head. I'm going to try using an older version or fraps or so...

Though, I haven't had any ntoskrnl.exe BSODs today at all...I'm not sure why. Though I did up my Voltage because I remembered I was doing some work in the Bios and turned down my Voltage a little bit because I thought it was fine, so that might explain it. If what I have deduced is correct, then valid explanations for all problems have been found.

I'll update if anything else happens.

Read other 12 answers
RELEVANCY SCORE 64.8

can someone please help me analyze what happened:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe000ee912028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
------------------


BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: explorer.exe
CURRENT_IRQL: f
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
STACK_TEXT:
ffffd000`9c925df8 fffff800`f8847213 : 00000000`00000124 00000000`00000000 ffffe000`ee912028 00000000`be200000 : nt!KeBugCheckEx
ffffd000`9c925e00 fffff800`f8a46699 : 00000000`00000001 ffffe000`ecaaf130 ffffe000`ecaaf130 ffffe000`ee912028 : hal!HalBugCheckSystem... Read more

A:BSOD playing C&C 4, dump analysis included

This is normally a hardware error reported by the CPU to Windows. More info here: BSOD Index
Get started with these free hardware diagnostics: Hardware Diagnostics

It can also be due to problems with low-level drivers. We'll need the following info/reports in order to analyze the crashes (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 64.8

Hi all,

Regular BSOD under the heading memory management.
Several months ago (January?) I replaced the hard drive after it decided it was fubarred! In recent weeks there have been the occasional BSOD but as it was on auto-restart I never really saw any of the detail in the message. In the past 24 hrs it has started becoming regularly unreliable, BSOD often and unrepdictably.

I have tried the following:

restoring to a point where it was relatively relaible (about a month ago) using the system restore facility. Didn't seem to make much difference.

I removed and reseated the memory to see if that was part of the problem - doesn't seem to be.

I have tried to provide a bluescreen view dump - does this dump make sense??? Also, further down, is a speccy view of the machine which is a Dell Inspiron 1525. Grateful for any advice.:

Mini092611-07.dmp 26/09/2011 08:22:18 MEMORY_MANAGEMENT 0x0000001a 0x00000030 0x88857478 0xae948000 0xacb3d5ec ntkrnlpa.exe ntkrnlpa.exe+cdb3f NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.0.6002.18484 (vistasp2_gdr.110617-0336) 32-bit ntkrnlpa.exe+cdb3f ntkrnlpa.exe+1e0fa8 ntkrnlpa.exe+203838 ntkrnlpa.exe+7cb68 C:\Windows\Minidump\Mini092611-07.dmp 2 15 6002 139,232
Mini092611-06.dmp 26/09/2011 08:15:50 MEMORY_MANAGEMENT 0x0000001a 0x00004000 0x86f965a0 0x00004000 0x0023dfed ntkrnlpa.exe ntkrnlpa.exe+cdb3f NT Kernel & System Microsoft® Windows® Operating ... Read more

A:BSOD Persistent (included a bluescreenview dump)

that doesn't look like other peoples dumps?????

Read other 11 answers
RELEVANCY SCORE 64.8

Hi i just got this blue screen of death a moment ago and was wondering if someone could help me find the cause by analysing the dump file, thanks in advance for any help

A:BSOD:PFN LIST Corrupt (Dump Included)

BSOD occured when chrome was running, reinstall it and update your Networking drivers


Code:
BugCheck 4E, {99, 9a47, 3, fb06}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Code:
PROCESS_NAME: chrome.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002d1d38c to fffff80002c8d740
Remove Asus PC probe or any Asus related monitoring tools


Code:
ASACPI.sys fffff880`04867000 fffff880`0486f000 0x00008000 0x42476c4c 28/03/2005 06:30:36
Regarding the ASACPI.sys go to C:\Windows\System32\Drivers and rename ASACPI.sys to ASACPI.old.

Update your Bluesoleil Bluetooth software/IVT software

Code:
VComm.sys fffff880`06395000 fffff880`06397880 0x00002880 0x47948155 21/01/2008 15:26:13
IvtBtBus.sys fffff880`0487b000 fffff880`04881180 0x00006180 0x486b26d1 02/07/2008 10:57:21
btnetBus.sys fffff880`049ed000 fffff880`049f4200 0x00007200 0x493b5381 07/12/2008 08:39:29
Update your Realtek High Definition Audio Function Driver http://218.210.127.131/


Code:
RimSerial_AMD64.sys fffff880`045f6000 fffff880`045fdc00 0x00007c00 0x492addcd 24/11/2008 21:01:01

Read other 2 answers
RELEVANCY SCORE 64

additional info :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002A5501E
BCP3: FFFFF88006792E20
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

A:new system..random BSOD (dump dile included)

  
Quote: Originally Posted by gamepoint


additional info :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002A5501E
BCP3: FFFFF88006792E20
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


Hello, Welcome to SF,

I guess on of the System service has caused the issue. Also iTunes has also caused the crash. Try to uninstall it and see whether that makes any difference. If your Overclocking please stop it. Make sure your BIOS firmeware is up to date. If your using any third party antivirus / Firewall uninstall it.

Run the Memory Diagnostic & HD Diagnostic

Also i would recommend to run System Integrity Checker
Start > Run > CMD >Right Click and Run as administrator > SFC/ SCANNOW

Drivers to be updated


Code:
bcmwl664.sys Thu Oct 23 06:11:31 2008
Bugcheck Analysis

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a syst... Read more

Read other 2 answers
RELEVANCY SCORE 64

Acer all in One running Windows 7 64 bit. Am getting the BSOD 0x0000001e when trying to attach pictures to email and also when I try to connect to my playbook through USB port or even through wireless network.
Included is a copy of the Dmp info.
Hopefully someone can help.
Thanks
Tony in Snowy Canada
System Information (local)
</B>
computer name:
windows version: Windows 7 , 6.1, build: 7600
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Pentium(R) CPU G6950 @ 2.80GHz Intel586, level: 6
2 logical processors, active mask: 3
RAM: 4151427072 total
VM: 2147352576, free: 1943621632

Crash Dump Analysis
</B>
Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.
On Fri 30/12/2011 2:36:16 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\123011-16458-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88006189CD0, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which... Read more

A:BSOD,error 0x0000001e Dump Info Included, Help!

No DMP included above...

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 9 answers
RELEVANCY SCORE 64

I've read the sticky, but I really hope this is the area where I put this.

I have Windows Vista, and use Internet Explorer.

The problem is that I just had my computer crash tonight. It sort of froze while I was watching Youtube and I think I had a few tabs open. I saw it freeze and then this blue screen came up saying it was dumping info on the disk or something, then it closed down. I restarted, clicked the 'fix now' button on AVG to turn the protection back on and did a scan. No virus was found.

I came on here and registered, looked up Blue Screen Of Death. I found a thread linking to a program, so I followed the Bleeping Computer posters instructions to get all this text about things called mini dumps. (below)

I don't know what caused this, other than maybe my D Drive doesn't have much memory left. Should I be worried, and is there anything I need to do that I haven't done?
(Please answer in very short words, I've only managed to learn all that stuff tonight ^ )

Thanks for reading and providing this site.
==================================================
Dump File : Mini110510-01.dmp
Crash Time : 5/11/2010 3:22:13 AM
Bug Check String : CACHE_MANAGER
Bug Check Code : 0x00000034
Parameter 1 : 0x0005077c
Parameter 2 : 0xbcd52b58
Parameter 3 : 0xbcd52854
Parameter 4 : 0x83a30021
Caused By Driver : ntkrnlpa.exe
Caused By Address : ntkrnlpa.exe+cdb8d
File Description : NT Kernel & System
Product Name : Microsoft®... Read more

A:Crash and BSOD (mini dump info included)

Is everything updated?

Read other 9 answers