Over 1 million tech questions and answers.

BSOD from System Service Exception and KMode Exception Not Handled

Q: BSOD from System Service Exception and KMode Exception Not Handled

For a long time now i have been getting BSOD's, pretty much all of the time from System Service Exception and KMode Exception Not Handled. Sometimes the PC never gets to the BSOD and just freezes up and restarts. This happens at any time whether im doing nothing or on the internet, sometimes it happens before the PC can load up fully. Most of the time though it happens when i am gaming. I rebuilt most of my PC but this still carried on. The parts that i have replaces are the PSU, RAM, Graphics Card and the case as well as adding in 2 extra fans. The temperature stays withing good values. The PC also often gets stuck on the post boot screen where it says "SMART Check Capable and OK" and it will take a few minutes for it to get past this stage and carry on loading, but this doesnt happen not all the time. I have tried diagnosing this myself but i have hit a wall. I ran Seatools and the HDD failed all of the tests, however after checking the fail code this was simply because it couldnt find the serial number. The HDD then passed tests from both CrystalDiskInfo and DiskCheckup. I thought that it was either the HDD or the MB as they are the only components not to be replaced. Since HDD seems to have passed its SMART tests i am inclined to believe it is the MB. PLEASE HELP!!!

example of BSOD's in attachment

Preferred Solution: BSOD from System Service Exception and KMode Exception Not Handled

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD from System Service Exception and KMode Exception Not Handled

Hello Perry, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 2 answers

Hi Guys,

I'm a composer working on a deadline and have started to experience quite intermittent BSOD's.
It appears to happen at higher system loads.
I'm reasonably experienced in building custom machines (this is my third on), and so far have never experienced issues with them.
This current one is a racked i7 3930K Hexacore on a Sabertooth x79, with 32gb of Ramm and a GTX470.
I'm using Nuendo 6 in 64 bit mode (Cubase's bigger brother) with an RME Fireface 800.
The fireface runs via firewire and has its own pcie card for this.
In addition there is an external G-tech drive connected via Esata.

In the last week I've been having 1-3 bsod's a day..a real productivity killer and I hope someone can help me out. I've used Whocrashed to at least get an indication of what it might be, but I don't have much experience with minidumps.

The only thing that I have noticed is that Windows is attempting a surface scan during startup, which fails due to a 'recently installed software package' I have no idea what that might be.
I've not been able to do a diskchk on C:
Regardless, C: seems to work fine and I've not noticed any issues.

Drivers are pretty much up to date.

I'm attaching a dump, would someone mind having a look and giving me a clue? Thanks in advance!


link to dump:

A:BSOD - Kmode exception and System Service exception

We need a few more files. Please follow the instructions in this thread:
Blue Screen of Death (BSOD) Posting Instructions

Then attach your files here directly using the paperclip icon.
Attachment 280245

Read other 5 answers

I keep getting BSOD every few hours randomly. I've tried updating drivers, removing AVG, Registry cleaners, MemTest64, and Seagate drive test. Here are my dump files. Attachment 240526 I'm just stuck and need some help. Any ideas will be much appreciated.


A:BSOD IRQL Not Less or Equal, KMode Exception Not Handled, Service Exce

The dumps are blaming sptd.sys so if you have Daemon tools please uninstall it and see how you go.

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck A, {200, 2, 1, fffff80002ad6065}

*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
Probably caused by : sptd.sys ( sptd+45c7e )

Followup: MachineOwner

3: kd> !analyze -v
* *
* Bugcheck Analysis *
* *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get t... Read more

Read other 2 answers


Laptop: Toshiba Satellite S955-S5373, Windows 8.1

Earlier today, my computer (which has been failing on Windows Update recently), started blue screening with the error "System Exception Not Handled." The computer would then continuously restart and go straight to that BSOD. After googling the issue, I (after many failed attempts) managed to enter safe mode and uninstalled/updated the GPU. The computer worked for the next few hours, and is now randomly blue screening again with similar errors, except it's not a loop like previously.

Only recent change/download/installation is I have begun using the TRENDnet AC600 Dual Band Wireless USB Adapter so that I can access our 5GHz Wi-Fi network.

I have attached the requested files. Thank you for your help!

A:BSOD, System Exception Not Handled, Kmode errors

Hi Lionheart & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

**************************Fri Oct 24 09:17:38.802 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\102314-27343-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035

System Uptime: 0 days 1:08:50.735

*** WARNING: Unable to verify timestamp for rtwlanu.sys

*** ERROR: Module load completed but symbols could not be loaded for rtwlanu.sys

Probably caused by : rtwlanu.sys ( rtwlanu+163163 )

BugCheck 1000007E, {ffffffffc0000005, 0, ffffd0006f79be28, ffffd0006f79b630}

Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: ffffd0006f79be28, Exception Record Address
Arg4: ffffd0006f79b630, Context Record Address




CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"

MaxSpeed: 1700

CurrentSpeed: 1696

BIOS Version 1.10

BIOS Release Date 09/25/2012

Manufacturer TOSHIBA

Product Name Satellite S955

????????????????????????????????... Read more

Read other 3 answers

I have been trying to find an answer to this issue. I've started having a lot of BSOD errors this past week and can't seem to diagnose the issue. I've updated video drivers, updated my BIOS, un-installed and re-installed programs. I'm wondering if anyone can spot my issue in these files.

Windows 7 Home Premium 64-bit
AMD Phenom II X4 945
OS has only been installed once, when I built the machine just over a year ago.

Thanks for your time.

A:BSOD: kmode exception not handled

Hi Shinyranger and Welcome to the Forum.

Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure[b]
Usual causes: System service, Device driver, graphics driver, ?memory
The majority, including the latest, of your dump files return:
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

Your latest dump file lists dxgmms1.sys as the probable cause. This is a Windows System graphics related driver and for it to be the cause of your crash is highly unlikely.
Old and incompatible drivers can and do cause issues with Windows 7, often giving false error codes.

As a Priority:

You Mention "I've updated video drivers". It may be a good idea to "reset" them:
Download and install Driver Sweeper.
Boot to Safe Mode
Uninstall your current Graphics Driver set up using Driver Sweeper.
Reboot to Normal Mode.
Install your new Graphics Driver set up.
Outdated Drivers. Update:

AsIO.sys Mon Aug 03 08:03:16 2009 Asus PCProbe Utility involved in some BSOD's. Possibly uninstall.
AsUpIO.sys Mon Jul 06 03:21:38 2009 ASUS hardware monitoring ASUS Support Update or uninstall both these ASUS Utilities.

nvm62x64 nvm62x64.sys Fri Oct 17 22:01:06 2008 nForce Ethernet

TBPANELX64.SYS Tue... Read more

Read other 9 answers

Hello, I have been getting BSOD's for a while with this error. It seems to happen when I am playing League of Legends, but can happen other times as well. Thanks for any help you can offer me! Hopefully I followed the instructions properly.

A:BSOD Kmode exception not handled

Check the Dell site for an updated BIOS/UEFI (this is my standard speech now :0)

This device is disabled. Is it deliberate? If so, why?

Bluetooth Device (Personal Area Network) BTH\MS_BTHPAN\6&1FE4CFC8&0&2 This device is disabled.

Please re-enable the device and then update it's drivers. Feel free to disable the device again AFTER the drivers are updated.

Lot's of Windows Update failures. If they continue, please post over in the Windows Update & Activation forum located here: http://www.eightforums.com/windows-updates-activation/

There's a good chance that this is a hardware/low-level problem. Here's my canned speech about them:

Out of 33 memory dumps there were 7 different BSOD error codes (to include several STOP 0x124/133's). The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things (the list is not in any sort of order):
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- dirt/dust/hair/fur/crud inside the case. Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)
- missing Windows Updates
- compatibil... Read more

Read other 8 answers

ive been getting lots of blue screens lately with different messages. can someone please look at the attached zip. the computer can be idle for hours almost all day but as soon as i use google for 1 to 20 minutes it crashes. takes a lot longer for my laptop to crash when im just playing mmusic from my computer or loading a dvd like spiderman but definitely crashes when im trying to surf the internet

A:Bsod kmode exception not handled

Hi Jiveman & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

**************************Tue Oct 14 22:15:39.759 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\101414-36921-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17238.amd64fre.winblue_gdr.140723-2018

System Uptime: 0 days 0:05:14.839

*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : win32k.sys ( win32k+12a433 )

BugCheck 3B, {c0000005, fffff801b0963bd9, ffffd000261851b0, 0}

Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff801b0963bd9, Address of the instruction which caused the bugcheck
Arg3: ffffd000261851b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.



FAILURE_BUCKET_ID: 0x3B_VRFK_win32k+12a433

BIOS Version F.15

BIOS Release Date 06/03/2014

Manufacturer Hewlett-Packard

Product Name HP Pavilion TS 15 Notebook PC

*********... Read more

Read other 5 answers

I keep getting blue screen and this error "kmode exception not handled" at random times.Dont know what to do.

A:BSOD and kmode exception not handled

Only 17 Windows updates installed ensure that you haveALL Windows Updates. Most Windows 8.1 system have around 55 or more updates onaverage). Please also install the windows 8.1 update 1. (KB 2919355 ). This Windows 8.1 Update and Windows RT 8.1Update also include security and performance updates, and they must beinstalled for your PC to receive any future security updates for Windows 8.1 or Windows RT 8.1.

Both your dumpfiles blames Probably caused by : bwcW8x64.sys ( bwcW8x64+37f0 )
This is Killer Bandwidth Control Filter Driver related or part of your Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
Please update your Killer e2200 device from here Killer? Technology | Qualcomm Atheros, Inc.

Read other 1 answers


I recently have been having a few BSOD's and they all point to netio.sys. Unfortunately it happens very random with me doing different tasks. I'm unable to duplicate it. I've have run a System File checker on it and that's come back fine. The only apps I usually use and all at the same time are Google Chrome, Football Manager, Skype and Microsoft Excel. Appreciate all the help!


Read other answers

I'm back . . .got my Harddrive issue fixed, and now this is happening.

I've been getting BSOD errors for a while but it's become so frequent my desktop is essentially useless for my purposes. The two errors that are always the cause are the ones in the title:

I've read this is usually a driver issue but after mass deleting programs and updating them all the only thing that seemed to make a difference was to delete Malwarebytes as it may have been causing issues since I have Kaspersky also installed. After I got rid of Malwarebytes the BSOD screens magically stopped for about two days until this morning. Same error and it's already happened twice. It won't even restart after it 'looks for the error' and reaches 100% so I have to manually turn it off and back on.

At this point I'm at a loss . .. is it possibly a hardware issue? I will buy a new motherboard/graphics card/whatever so long as it fixes the problem. During the harddrive issue before I tested everything sans the graphics card with various programs (ram tester, Hot CPU tester, Seatools, etc.) and everything came up clean. Ram, Motherboard, harddrive - all of it. I don't know how to test the graphics card and I wouldn't know what to look for if it's something like loose cables or faulty parts on the actual parts so I haven't looked into that.

The other thing I haven't tried is reinstalling Wi... Read more


Sometimes 3rd party security type programs don't work well in Windows 10; so as a test try uninstalling Kaspersky to see if those BSODs stop.

Read other 2 answers

Hello there, I just got an Asus Q501LA notebook and while connecting to a wireless network I get a BSOD with this message kmode exception not handled (netwew02.sys) Any help would be greatly appreciated.


A:BSOD - kmode exception not handled (netwew02.sys)

All 5 dumpfiles blame Probably caused by : NETwew02.sys .
The netwew02.sys is the driver for Intel? Wireless WiFi Link Driver - Intel? Wireless WiFi Link Adapter (Windows 8 only AFAIK).
Your netwew02.sys drivers is from Tue Feb 18 17:43:42 2014(53038dbe) 003565c4 None NETwew02.sys
Where did you get this driver from?
According to Asussupportsite of your model ASUSTeK Computer Inc. -Support- Drivers and Download Q501LA you must first uninstall the older driver before you install the new driver.

You are also using a AirPcap a wifi capture adapter for windows with drivers from 2011, who according to WinPcap site are not compatible with windows 8. There is a new version 4.1.3 which added windows 8 support.
It could be that these 2 drivers are interfering and give problems
Hopefully updating the winPcap driver to windows 8 version will solve the BSOD.
Another possibility is that your netwew driver is corrupted, uninstalling it and reinstall may solve this.
Or that your version is not compatible with your system, take the version of the above Asussupportsite.

Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000094, fffff88004eefb1e, 0, fffff8800098f180}
*** WARNING: Unable to verify timestamp for NETwew02.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwew02.sys
Probably caused by : NETwew02.sys ( NETwew02+c9b1e )
Followup: MachineOwner
1: kd> !analyze -v
************************************... Read more

Read other 2 answers

Hello, and thanks very much for providing this service.

I've been getting intermittent Netio.sys BSODs, typically while browsing using Chrome, or doing nothing. I was having a bunch of them in September, but they seemed to go away for a time. Now I'm having them again, and would really appreciate direction/help.


Read other answers

Hi guys. Recently I have been getting a few BSODs. I have attached the requested .zip file of the most recent crashes (some previous ones have been wiped for disk clean-ups and reformatting etc.). Thanks in advance for any help. The only things I can think of that made the problem happen are the installation of Sandboxie and/or updating my Intel Graphics card for another program. I put my specs on my profile and the rest of my story is below in case it also helps:

I have since un-installed everything from the time I have been getting these BSODs, reformatted, updated the BIOS and a few drivers, and I still get them... although less frequently and they change a bit in type. The other things I get are appcrashes, originally with explorer.exe, and more recently with firefox, and a few other programs (it could be more frequent when I use more RAM / have more windows and Flash Player open, but also appears pretty random in some other instances).

I have tried repairing Windows but I am having errors backing up, just about managed to keep installing Windows Updates after reformatting, and I can't create a repair disk as I have no drive to do so. When I downloaded another repair disk and booted it via USB I got a few more issues like "Startup Repair Offline".

sfc /scannow also found errors but was unable to fix. I also ran a memtest86 and it had 65535+ errors before I had to stop it because it was running for many hours. I have just completed the first year with my lap... Read more

A:BSOD, Memory Management + Kmode Exception Not Handled

Hi n3rv.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest shows no error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

&... Read more

Read other 5 answers

So i was just playing some games and out of no where a BSOD appeared! This now happens often... Dump file is intended.

Read other answers

I've been getting this BSOD a couple times of day and haven't been able to fix it. I believe its a problem with the Killer Network drivers but I updated to latest drivers provided from my motherboards website: MSI. They happen randomly and it doesn't occur when I'm doing something specific. I uploaded my minidump files.


Hi Ski3high & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

1: kd> k
Child-SP RetAddr Call Site
ffffd000`67deb928 fffff802`abdf5eda nt!KeBugCheckEx
ffffd000`67deb930 fffff802`abd761ed nt!KiFatalExceptionHandler+0x22
ffffd000`67deb970 fffff802`abd033a5 nt!RtlpExecuteHandlerForException+0xd
ffffd000`67deb9a0 fffff802`abd0225f nt!RtlDispatchException+0x1a5
ffffd000`67dec070 fffff802`abd7a8c2 nt!KiDispatchException+0x61f
ffffd000`67dec760 fffff802`abd77ce8 nt!KiExceptionDispatch+0xc2
ffffd000`67dec940 fffff801`838f98e8 nt!KiDivideErrorFault+0xe8
ffffd000`67decad0 ffffe001`3969ec38 bwcW8x64+0x38e8
ffffd000`67decad8 fffff801`838f91d7 0xffffe001`3969ec38
ffffd000`67decae0 ffffe001`396002b8 bwcW8x64+0x31d7
ffffd000`67decae8 ffffe001`396002b8 0xffffe001`396002b8
ffffd000`67decaf0 00000000`000005cf 0xffffe001`396002b8
ffffd000`67decaf8 ffffe001`3969ed58 0x5cf
ffffd000`67decb00 ffffe001`396002b8 0xffffe001`3969ed58
ffffd000`67decb08 fffff801`838f8c67 0xffffe001`396002b8
ffffd000`67decb10 ffffe001`396003b0 bwcW8x64+0x2c67
ffffd000`67decb18 ffffe001`396002b8 0xffffe001`396003b0
ffffd000`67decb20 ffffe001`3a8cdd20 0xffffe001`396002b8
ffffd000`67decb28 00000000`00000001 0xffffe001`3a8cdd20
ffffd000`67decb30 00000000`00001000 0x1
ffffd000`67decb38 00000000`00000000 0x1000

So the Killer Network Driver caused a Divide Error which caused the BugCheck.
There is ... Read more

Read other 8 answers

I was having BSOD issues and did a clean install of windows 8. Now I am still having the same issues, but they are more frequent. I thought it might be Avast, so I removed that and am running Win Defender now. Same issues. Graphics and network cards both updated with latest driver from AMD and Ralink. Not sure where to go from here. HP Sleekbook 6 with Win 8. I've attached my logs. Thank you!

Edit: I thought it might have been a win update as well, and I rolled one back. It was an optional one, around 700mb, but am still having the same issues.

A:BSOD Bad Pool Caller and Kmode Exception Not Handled

Please update Driver Reference Table - appexDrv.sys as it seems to be the cause of your crashes.

BtAudioBus.sys Fri Jun 15 05:17:09 2012 (4FDAA935)
IVT Bluetooth Audio Bus Driver for Windows 7 (IVT BlueSolei)

BtL2caScoIf.sys Thu Jul 19 11:47:36 2012 (5007D7B8)
Ralink L2CAP_SCO Interface Profile Drivers at Bluetooth Stack for Windows 7

stwrt64.sys Sat Jul 21 15:36:42 2012 (500AB06A)
SigmaTel High Definition Audio Codec

RtsBaStor.sys Mon Jul 30 08:08:03 2012 (501624C3)
Realtek Pcie CardReader Driver for 2K/XP/Vista/Win7

SynTP.sys Sat Aug 25 01:20:26 2012 (50380C3A)
Synaptic Touch Pad Driver

WirelessButtonDriver64.sys Thu Aug 30 05:11:29 2012 (503ED9E1)
HP wireless driver - 1st seen in Windows 8[br]Apparently related to various keyboard functions and FN key

hpdskflt.sys Mon Sep 24 17:31:14 2012 (50607CC2)
HP Mobile Data Protection System Disk Filter

Accelerometer.sys Mon Sep 24 17:31:45 2012 (50607CE1)
HP Mobile Data Protection System Accelerometer

... Read more

Read other 4 answers

Hi all. I had a previous problem which was different to this current one that just occurred, before it wouldn't boot sometimes or able to wake from sleep and get BSODs, my laptop has been working for last few months after a complete clean re-install of Windows 10 but now i just got another dreaded BSOD.

I took a photo but i think it's too big too attach here, i tried but it didnt work. I am looking at the photo now and this is what the screen info said:

"Your PC ran into a problem and needs to restart. Just collecting some info.....etc..."

What failed: igdkmd64.sys

Below attached is the zipped log-file using the dm log collector application.

Would really appreciate some help. Like i said, some months earlier i had alot of problems, i completely re-installed Windows 10 clean and if hasn't had any problems for a few months until just now. I was only browsing on a forum website that i browse alot on when the BSOD occurred.

Thanks again,


P.S. My current NVIDIA driver version is 369.09 and i just opened the NVIDIA control panel & it says an update is available (version 373.06). If you do advise that i update the driver, what is the best and cleanest way to avoid any more troubles/conflicts? Do i just go ahead and download & install the new version? Do i need to first un-install current one? What is the best & cleanest way IF i should indeed update my NVIDIA dedicated driver.

Thanks again.

Read other answers

Hello! For the past few months I've been dealing with a "Driver Power State Failure"
I am using Windows 8.1 on a custom built desktop.

Suddenly as I was playing Titanfall I got a "Kmode exception not handled" bsod. [followed by (lan..something)]
I have tried a few solutions to the problem to no avail, I thought it was my graphics card (msi 660ti) which I sent in for a RMA, I uninstalled those drivers and put in a temporary msi 560ti and reinstalled them.
My most recent "Driver Power State Failure" has been saved and uploaded as "bsod view"
I also ran the SF_Diagnostic Tool and will upload that as well. -Not sure how to upload .zip, will upload .rar
SFdebug is SDdebugFiles-Cryloc attachment.
I went to command prompt and did sfc /scannow The main results are as follows:

Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.

If I should upload this as well let me know.
I'm unsure of what other details you all need, I thank you in advance for your support.

-Edit: I should also mention I was having this error before I did a clean install from Windows 7 to Windows 8.1

-Edit 2: When I power on my PC there is some kind of recovery error each time it boots cold, I must hit the reset button each time.

A:BSOD Driver P State Failure & KMODE Exception Not Handled

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).

Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disk-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help

Because the error continued after a clean install, please try these free diagnostics: Initial Hardware Diagnostics

Problems with SFC.EXE can be addressed in the Windows Update forums located here: Windows Updates & Activation - Windows 8 Forums
Please be sure to let them know that you also have a BSOD topic that's being worked on.

The memory dumps seem to point at the hard drive, but this can also be the connections/caling, the storage controller, your chipset, or even the Daemon Tools software. If you remove Daemon Tools and pass the hardware diags - then we'll move on to updating chipset and storage controller drivers.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable ... Read more

Read other 3 answers

Hey everyone,

I've got a fairly fresh install of Windows 10 Pro that is giving me some trouble, on a Lenovo Thinkpad W540. I've been getting BSOD crashes that I have been so far unable to resolve. Lately they seem to be happening when the machine is idle and I'm not watching it, and have been becoming more frequent since a windows update the other day. I was getting Kmode Exception Not Handled (1E) at first, and after running the driver verifier, it was finding that IntelPCC.sys was misbehaving.

I uninstalled that driver (although not completely -- I found it had reinstalled this morning), and found my machine with a Critical Process Died (EF) BSOD when I got to work this morning. As far as I can tell from the logs, they say it's likely caused by ntkrnlmp.exe.

I began running into BSODs when I installed the Lenovo System Update application, and it would BSOD when I started trying to install updates and drivers. I've run Prime95 overnight a few times since then, and have been getting rounding errors after 8 or 9 hours on 1 or 2 out of 8 threads on stock clocks, although a few runs of 10+ Intel Burn Tests have yielded accurate results on extreme.

At this point, I'm really not sure if I'm dealing with a memory issue, or a driver issue, or some other hardware failure. I have uploaded my logs in the hopes that someone here can provide some insight into what might be happening.


Read other answers

I recently bought an MSI GT70 20c which came preinstalled with windows 8. I have downgraded and installed windows 7 and since I have been having a few problems with the BSOD.

I have attached the .dmp files and hope that someone can help.

ntoskrnl.exe shows up in most of the problems along side my video and wifi driver.

I have tried reinstalling my video drivers and the next step is appears to be a reinstall of windows 7.

Anyone else have this type of problem or can help?

A:BSOD playing games, watching youtube. KMODE EXCEPTION NOT HANDLED

i just did some research and this could very well be a possible bad ram or not the right ram type issue(s). i would take your ram out and put them back in one at a time and test each one with the system; and if you encounter a bsod screen again; try and trap the blue screen and post it up here again.

Read other 1 answers

Hi all,
the last month has been a real nightmare: I started getting BSODs practically out of the blue and it's happening more and more often.
I can't recall installing anything particular at the time (I use the PC mostly to work and navigate the web), and I haven't changed any piece of hardware, lately.
I keep the drivers up to date and use Windows Update regularly, use Avira as antivirus software (which has never given me problems), regularly scan the system for viruses/malware (using both Avira and Anti-Malware - one at a time, of course) and defragging the drives when necessary.
In the last few days I ran RAm tests for a few hours but no errors were detected...

I can't think of any other info you might want, attached you'll find all the data required by the BSOD posting instructions...

Thanks in advance for your help.

A:Random BSOD, errors IRQL not less or equal/KMODE exception not handled

And here's the .zip file

Read other 9 answers

I have facing the issue kmode exception not handled. please let me know.How to solve this error

Read other answers

? OS - Windows 7 ? x64 ? Windows 7 Home Premium ? OEM ? 1.5 years old ? half a year since last windows reinstall? I7 920 ? HD 5970 ? ASUS P5X58D PRemium ? HX 850

A:kmode exception not handled

Before we can investigate the underlying cause you need to update your asacpi.sys. It may (in itself) be the cause.


The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

Read other 1 answers

Ok ive just had this crash a few mins ago and i ran WhoCrashed which said this:

On Wed 10/07/2013 17:00:59 GMT your computer crashed
crash dump file: C:\Windows\Minidump\071013-25662-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BD0)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

A:Kmode exception not handled

If you want to get it debugged, you need to post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 6 answers

? OS - Windows 7 ? ? x64 ? ? Windows 7 Home Premium ? OEM ? 1.5 years ? half a year ? I7 920 ? HD 5970 ? ASUS P5X58D PRemium ? HX 850
Thanks in advance.

A:kmode exception not handled

{lease follow these instructions for finding and uploading the DMP files.


Read other 1 answers

BSOD has showed up twice in the past 24 hours.
Windows 10  x64
Original OS was Windows 8 (I think).
Upgraded to Windows 10 soon after it was released
Laptop is about 3 years old.
Video Card: AMD Radeon HD 8610G
Laptop Model: HP Envy TS m6 Sleekbook

Read other answers


Iím running W2Kpro Sp4, IE6, Sp1 on a Toshiba Satellite laptop. Iíve read the threads on this subject but I think Iím in a different category.

There is a golf game I love that runs on Shockwave Player and my system is too slow to handle it. So I messed around installing older versions of Shockwave hoping to improve the situation. Nothing helped and I started getting the BSODs. I uninstalled all Shockwave software, defragged, and reinstalled the most current version. I still get BSODs when I try to run the game. (I didnít get them prior to my attempt at ďimprovementĒ and my system runs fine unless I try to play the game.)

Typically it is the KMODE EXCEPTION NOT HANDLED. Most recently with this location:
0x0000001E (0xC0000005, 0x76726553, 0x00000000, 0x76726553).

Today I got a new one: PAGE FAULT IN NONPAGED AREA:
0x00000050 (0xE28E2000, 0x00000000, 0xEF3AEDD1, 0x00000000)
Address EF3AEED1 base at EF3A1000,
Date Stampo 38cacd80 Ė tridkbm.sys
Any suggestions?


Read other answers


Found this F?rum to be helpful when Reading the stories. Please accept to look at my problema:

I migrated to W10pro on day one and I must say all went perfectly smooth and well!
Nothing special until some days later:

I do use Bitlocker on both partitions, startup and data.
I started up normally, but when unlocking the data disk, on the momento I gave the password en pressed Enter, I was presented with a blue screen telling error:
Kmode exception not handled. fvevol.sys We must restart your pc to............

Pc then rebooted, and after a rather long time (2 minutes) with full HD activity it came up again normally.
When I did the unlocking of data disk, all went well this time.

What is confirmed since (5 times now) that this error occurs always at the same action: Unlocking Bitlocker of my 2nd data HDD.
I am now on a once a day frequency of the BSOD!

Attached my log files

Thanks for any tips!

Read other answers

I'm using win 2000. Been fine for 5years, no BSoD's at all. My niece was on my computer looking at someone's myspace and then it shut down and when it rebooted, I got this fine message:
Stop: 0x0000001E (0xC000005, 0x81DB0C8E, 0x00000001, 0x00000097) KMODE EXCEPTION COULD NOT BE HANDLED.
(sometimes, after a reboot, it has the 1E then 0x000001D, 0xEB41B4E4, 0x81DB4C8E, 0xC0000400)
I went into safemode and did a search for all files modified around the time she was on it. There was some spyware which I deleted after running Hijackthis. I have reduced the amount of virtual memory as well. Unfortunately, my virus program will not run during safemode so I don't know if there's a virus (hijackthis would notice it right?)
I have no idea what all the numbers in the error refer to. If anyone does, that could help me in fixing this and finding out what hardware or driver went haywire.
Can this just happen all of the sudden like this? I have not installed any new hardware or programs for awhile either.
Please help.


Read other 16 answers

Any ideas or suggestions would be greatly appreciated!

I restarted and encountered the error message:
STOP: 0x0000001E (0xC0000005,0x0001001D,0x05900002)
and at this point it would boot up in safe mode.

I flashed the bios, and there's over 100 gigs of disk space. I suspect that I either messed up the video drivers during a video game installation or got a virus.

I tried to run a scan disk on my next boot up and I got a new error message:
STOP: 0x0000001E (0xC0000005,0x0001001D,0x058E0002)
and now the computer stalls trying to boot up in safe modes.

short of reformatting, I'm out of ideas so if any one could please volunteer some thanks in advance.

A:kmode exception not handled during bootup, no safe mode!

Read other 11 answers

i have no idea what happen to my laptop lately...
after for awhile using, my audio driver suddenly stop functioning... even i tried to reinstall it didn't work
before that happened, Crashed and display "kmode exception not handled"
please help me
Here is the latest dm fileRYUUSEI-Mon_02_01_2016_195747_82.zip

A:kmode exception not handled. Something wrong with my Audio Driver

Try updating the BIOS and check Acer for driver updates frequently.
There are some drivers from Acer that need updating.

Read other 0 answers

When running the Windows anniversary updates i ends with a screen telling me that system did not load correctly due to a KMODE EXCEPTION NOT HANDLED, and offer me to continue starting or try various error correcting possibilities. Continue restarting collects a lot of system information that could useful but there is no chance to collect it before coming back to the same screen again.
With the restart option to start in secure mode the system start with the desktop view but very little is responding.
The XPS 12 is less then 3 years old so one could expect DELL to do some work to help us get this problem solved.

A:XPS 12 9Q23 Anniversary Update an Kmode exception not handled

Hi stawes,Thanks for posting.The KMODE EXECPTION NOT HANDLED error can be fixed by going here.  Please try that and post back if you need additional assistance.  Thanks.Regards,Dell-Robert P

Read other 1 answers

So I built a new pc on June the 2nd.
CPU intel i5 4670 3.4ghz
Mobo Asus Z87-k
RAM 16gb corsair vengeance low profile ddr3 1600mhz CL9 1.5v
GFX MSI GTX 770 2gb
PSU Corsair TX650w (From OLD system)
Soundcard Creative Soundblaster Xtreme Gamer (From OLD system)
Storage 1tb and 640gb WD Caviar Black HDD (From OLD system)
OS: Win 7 SP1 fresh install

So here's a quick time line
build pc the first time; two faulty RAM slots that won't POST and turns out RAM is 1.65v which is technically not recommended so swapped for one above which is the recommended 1.5v for haswell cpus (further reading on this says 1.65v should work fine but trying to maximise compatibility here). Motherboard replaced as faulty. Problems were recurrent BSODs after and during fresh install of windows 7 of the KMODE_EXCEPTION_NOT_HANDLEd, IRQL_NOT_LESS_OR_EQUAL and SYSTEM_SERVICE_EXCEPTION with bluescreenviewer citing ntoskrnl.exe as the culprit (which it isn't). Memtest was clear over 12 passes. Hard drive diagnostics checked out perfectly.
Received the replacement gear and rebuilt but still got the same problems. RAM slots tested fine, Memtest is clear over 8 passes. Tried without sound card, still BSODs. Without graphics card, still BSODs. BSODs occur when idling, when trying to install drivers or when trying to install windows occasionally.
My current thoughts are it must be the only other component I haven't tested since I dont have another socket 1150 motherboard - the CPU. Kind of at m... Read more


I personally can't get anything from your logs, there are certainly no drivers showing up and it does seem to be pointing towards hardware. If you're suspecting the CPU, which it could well be, run Prime95 to stress test it.

Run Prime95 to stress test your CPU. Hardware - Stress Test With Prime95

Two things I would ask though is what copy of Windows media do you have, a DVD? It may be worth using an ISO from Digital River to rule that out. The other would be is your BIOS revision the latest?

Read other 2 answers

My laptop keeps on crashing with this error "this System Thread Exception Not Handled", and the last error I got was "Driver Power State Failure".  Every time it happens I recover my the computer to the previous restore
point. That is very annoying, I've got tired of restoring my computer, can anybody help me to fix it permanently?

I follow instructions posted in the forum to copy the  DMP files, I tried to post the link here but I was not able to, I got this error after I pressed the Submit button:

        Body text cannot contain images or links until we are able to verify your account.
Anybody can help? I cannot even get passed posting the link here....
I appreciate  your help! 

Read other answers

My laptop keeps on crashing with this error "System Thread Exception Not Handled", and the last error I got was "Driver Power State Failure".  Every time it happens I recover my the computer to the previous restore
point. That is very annoying, I've got tired of restoring my computer, can anybody help me to fix it permanently?

I follow instructions posted in the forum to copy the  DMP files, below is the link:
Thank you for your help! 

Read other answers

Some background info: I am running Windows 7 Ultimate. It is 64-bit. I am running it on a laptop.

I have no idea why I got the BSOD, but I did get it today. Restarted the computer in safe mode, then restarted again in "regular" mode and everything was fine. I'm typing on the same computer now (it's the only one I have, okay?). Can't think of anything that would be wrong with the computer, except the charger broke (I'm pretty sure this is a charger issue, and a new one is in the mail) so the battery doesn't charge: I have to have the computer plugged in when I use it.

Anyway, here's the text from the MEMORY.DMP file. Thanks for your help, guys! I'm a little afraid to even try anything myself, since I've heard messing with these files is a bad idea, so I came here for help first. I hope that's okay.

Microsoft ® Windows Debugger Version 6.12.0002.633 AMD64
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
Machine Name:
Kernel base = 0xfffff800`02a54000 PsLoadedModuleList = 0xfffff800`02c98670
Debug session ti... Read more

A:BSOD: System Thread Exception Not Handled?

- Download Who Crashed --> http://www.resplendence.com/download/whocrashedSetup.exe

- Install it and run

- Click on Analyze, after few seconds, you will get the message

- Right click, then Select All, right click, then Copy

- Save text in Notepad, and upload it here

Read other 4 answers

i had this 
bsod system-thread-exception-not -handled
after scanning with norton power eraser and deleting(norton) a file from system mechanic pro,
so after rebooting for changes to take effect i had bsod.i know if i uninstall system mechanic from safe mode its gonna be fine,but i cant acess safe mode cause im having again there blue screen.also i tried system restore but it cant finish cause some windows files are corrupted,so i ran sfc/scannow and found corrupted files but couldnt repair them.
so im asking how can i fix bsod without system restore or accesing safe mode,and how can i fix my corrupted windows files so system restore can work.
fyi i cant also create a usb for system repair cause of corrupted files......
thats my minidump file.......
Dump File : 102714-17296-01.dmpCrash Time : 27/10/2014 9:53:43 μμBug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000007eParameter 1 : 0xc0000005Parameter 2 : 0x81fce7f8Parameter 3 : 0x829dc8f8Parameter 4 : 0x829dc4c0Caused By Driver : SMR430.SYSCaused By Address : SMR430.SYS+d7f8File Description : SMRProduct Name : SMRCompany : Symantec CorporationFile Version : : 32-bitCrash Address : SMR430.SYS+d7f8Stack Address 1 : SMR430.SYS+bd0bStack Address 2 : SMR430.SYS+cfdfStack Address 3 : SMR430.SYS+1407Computer Name : Full Path : D:\Windows\Minidump\102714-17296-01.dmpProcessors Count : 2Major Version : 15Minor Version : 9600Dump File Size : 143.824Dum... Read more

A:bsod system-thread-exception-not -handled

Do the following, it should repair the corrupt files.
Click or tap on Search, then type cmd in the Search box.
cmd will appear under Apps, right click on it and in the options at the bottom of the page choose Run as administrator.  This will open the Elevated Command Prompt.
In the Elevated Command Prompt type in the following command followed by pressing the Enter key for each command.
DISM /Online /Cleanup-Image /RestoreHealth

Read other 15 answers

Hi, since updating with the Windows 10 Anniversary Update, on Aug 3rd. I have had 8 BSOD occurrences Each giving the same
Stop Code: THREAD EXCEPTION NOT HANDLED also What failed? partmgr.sys.
Each time I had to power off and restart.
I looked up this driver in the Driver Reference Table which says this is;
Partition Management Driver - Windows Update

I ran your debug download which created the following file:DESKTOP-IV1DV6A-09_08_2016_181630_95.zip

Can you help me?
ps. (Did my attachment work?)

Read other answers

I got a BSOD with system thread exception not handled netIO.sys

I used bluescreen viewer and it highlights the netIO.sys and the tcpip.sys and also ntoskrnl.exe on another dump.

I have viewed the dmp files in windbg but if I'm honest I don't know what I'm looking for.

I've zipped up the dmp files(only 2 files)if someone could have a look and find out what the issue is.

It would be greatley appreciated, many Thanks.

Read other answers

Recently I got this BSOD:


The first time, Its said about a file named "fltMgr.sys"; But after that, Everytime It only shows "SYSTEM THREAD EXCEPTION NOT HANDLED"

Windows can't loads up. I can access the windows only in safe mode.

Windows 10 Pro x64

The dump has been uploaded.


Thank u.

Read other answers

My computer crashed yesterday after I plugged in a USB drive. The BSOD error code was SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and I get the same error everytime my computer turns on. I can boot into the recovery options but nothing works (safe mode, system restore, startup repair all broken). I have another HDD in the computer which I can boot from and access the old broken windows drive. I really don't want to have to wipe the drive.

Have looked at the dumps, but they seem to be from months ago. How do I get the dumps from this crash?

The error I get when trying to do a system restore is:

"System restore failed while restoring the registry from the restore point. An unspecified error occurred during system restore. (0x80070003)"

Thanks to anyone that can help.

A:BSOD system thread exception not handled

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 1 answers

This error has happened a couple times before, but today it happened twice all within a few minutes of each other.

A:BSOD system thread exception not handled atikmdag-sys

The report folder is empty. Please retry with these instructions:
Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):
Eight Forums: Blue Screen of Death (BSOD) Posting Instructions
Ten Forums: Solved BSOD - Posting Instructions - Windows 10 Forums

Read other 1 answers


I'm using a asus k450j laptop, the laptop only have a few months so its almost new, it's rare happening bsod, this time happened while seeing a movie.

I hope that this thread is well made.

With my best regards.

A:BSOD System Thread Exception Not Handled [AsusTP.sys]

C: drive only has about 11% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

Many Windows Update failures in MSINFO32. Please ensure that you have ALL available Windows Updates. If you have problems with Windows Updates, please post over in the Windows Updates and Activation forums: Windows Updates & Activation - Windows 8 Forums

Out of 5 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

Please get a head start on the hardware diagnostics - they are located here: Hardware Diagnostics

Please note the drivers below that date from before the rel... Read more

Read other 1 answers

woke up one morning after leaving my computer on over night, the fan was going like a bat out of hell and when I attempted to play a game on it was very laggy. figured I would turn of my computer for a while to let it cooldown, this had minor improvements but it didn't return the standards from the previous day and as I continued to use it got slower again. I figured this was the sign of a heating problem to which I went about replacing the thermal paste and it seemed to have improvements but I was occasionally getting the system thread igdkmd64 BSOD, still not up to standards.

bringing us to today when I got of work I found I couldn't run the computer for much longer than 20 minutes without the BSOD mentioned popping up, checking my system showed that my CPU was running at 90 + and from my research igdkmd64 has to do with intel graphics drivers and I have followed guides on how to get rid of them and how that should at least fix the bsod issue but it hasn't.

Is this BSOD a result of the heating issue? any suggestions on how to go about fixing it?


graphics: gtx 970

motherboard: z77 extreme4

processor: intel core i5-3570k

also don't know if it matters but my cooling system is a corsair hydro series h100i which seems to be working, fans are spinning but I guess I dont really know whats going on with the rest of it since its a closed system.

A:overheating cpu and system thread exception not handled bsod

Read other 16 answers

Hi BC, 
About a week back, my computer crashed with a BSOD. However, there were no other specifics. At that time, I had almost 30-35 tabs open on Chrome as I was doing research for my thesis.
I decided to then just make sure I don't open too many tabs and everything seemed fine after that.
Today, another BSOD happened and this time, with the aforementioned error "system thread exception not handled (bckd sys)".
I'm really not sure what could be triggering this. The only change I've made to my computer over the last two weeks is that I recently installed K9 Bluecoat Web Protection.
I did a fair bit of searching online, but each forum or article seems to indicate a different root cause, so I'm wary of following the solutions provided, given that I may not have the same root problem.
Computer details:
Model: Samsung NP370R4E
Windows 8.1, 64-bit
Intel ® Pentium ® CPU 997 @ 1.60GHz
Also, here is the last two events from the event log (I'm not sure if it will help identify the problem, but just thought I'd throw it in):
Log Name:      System
Source:        Microsoft-Windows-Kernel-Processor-Power
Date:          2/2/2016 12:08:27 AM
Event ID:      37
Task Category: (7)
Level:         Warning
User:          SYSTEM
Computer:      Samsung
Des... Read more

Read other answers


This BSOD occurred for the first time last weekend. If my memory serves, I was watching a movie on vlc player when it happened. I have an Asus Notebook PC model name: S400C, V400C, R407C. Running Windows 8.1 x64bit. Please help.

(I hope I did the SF Diagnostic Tool correctly)

Thank you!

A:BSOD System Thread Exception Not Handled [AsusTP.sys]

Only 57 Windows Updates installed. Most systems have 70 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

Visit this liink and update all of the 8.1 drivers (to include the BIOS/UEFI) Notebooks & Ultrabooks - ASUS VivoBook S500CA - ASUS

More to follow later today - I'm running late this morning

DON'T USE THE FOLLOWING STUFF - I HAVEN'T REVIEWED IT YET (this is a canned speech that I edit before posting):

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ASMMAP64.sys Thu Jul 2 05:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)

atkwmiacpi64.sys Tue Sep 6 21:44:52 2011 (4E66CC94)

AiCharger.sys Thu Sep 22 22:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)

tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE... Read more

Read other 4 answers