Over 1 million tech questions and answers.

Malicious URL Detection Issue

Q: Malicious URL Detection Issue

Hello,
 
Long story short, I had a malware infestation on my laptop.  I currently have run the latest versions of the following:
 
Avast - Full scan
MBAM - Full scan
adwCleaner
RogueKiller
Trend Micro Anti Threat
TDDS
 
Each one of these seemed to find things here and there, but I still have the problem. Combofix and aswMBR will not run due to "A device attached to the system is not functioning" error.
 
In Safe Mode Combofix will start to run but then I get a BSOD and reboot.  asw will come up but won't scan says "Error loading driver" when it starts then "Scan Error" when you try to run a scan. 
 
I have two particular URL's coming up that Avast is currently blocking:
www.babaloonx.com and www.colboltuz.com plus one URL that is just an IP.
 
Any help is appreciated!

Brian
 
 

RELEVANCY SCORE 200
Preferred Solution: Malicious URL Detection Issue

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Malicious URL Detection Issue

Read the guide here
http://www.bleepingcomputer.com/forums/topic34773.html
and create a topic here with logs
http://www.bleepingcomputer.com/forums/forum22.html
Good luck

Read other 1 answers
RELEVANCY SCORE 59.6

How come my other post was deleted? or did I mispost it somehow?
 

A:Some Malicious Software For Analysis/detection

We moved it to a private forum, out of public view. It's much too risky that someone would infect themselves. Please do not post anything of that nature again.
 

Read other 2 answers
RELEVANCY SCORE 58.8

HELP! I have my first warning from VCatch. It says malicious probability: 95%. It says the "Adv. Mal. Appl. has recognized suspicious charateristics in the file SYSEDIT.EXE downloaded by IE. File is very similar to a known malicious application
(more info: 2E439491)". It asks if I want VCatch to delete it. This is a file created by Microsoft Corp. Do I want to delete it?
I would greatly appreciate a quick response as the warning pg is on my screen, I don't want to do anything until I know what to do.
Thank You! (i am a beginner at this)
 

A:delete or not VCatch malicious applic. detection

With 95% chances of it being malicious I would delete it.
 

Read other 2 answers
RELEVANCY SCORE 47.6

Hi, first post here for me.. After successfully installing the latest version of Java (6.0.260) and then running the detection tool, it keeps telling me it does not detect Java on my computer. I've tried rebooting after install, uninstalling and reinstalling, using the offline version and every troubleshooting tip listed after the non-detection message. I'm using IE10 with the 32-bit browser. Java used to run fine until lately. I'd appreciate any suggestions on other solutions. Everything I've tried has failed. Thanks!

A:Java detection issue

Hi welcome to Seven Forums,
Open Internet explorer,
Use Alt+TA or Gear symbol on the top right and Manage add-ons
Click on Show all add-ons on the left middle of you screen,
Then see if Java is Enabled.
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7
Also you might switch to Software rendering,
Alt+TO
Internet options/ Advanced/ Check the top box/ Apply and Okay.
http://www.sevenforums.com/tutorials/149063-internet-explorer-gpu-hardware-acceleration-turn-off.html

Read other 5 answers
RELEVANCY SCORE 47.6

So...
Having a small issue with my laptop. i looked all over the internet and alas i came up with nothing whatsoever.
I ordered my laptop off of microsoft website because they had a deal for students, this was about 3 years ago. 
The other day i was watching a stream on my laptop and it started making clicking noises and froze my computer, i restarted chrome and everything worked fine again.
then about a week later watching another stream, the clicking noises began again only this time it shut my computer off. so i turned it back on and this error came up(No boot device detected. strike F1 to retry boot Strike F2 to run setup utility or F5 to run onboard system diagnostics.) 
So naturally i clicked retry boot a couple million times but to no avail nothing worked.
So i ran my onboard diagnostics. and it came up with hard drive not connected. so i was like okay my hard drives fried. so i connected a different one... same error message
 
So now ive come here for solutions, ive never in my life resorted to posting online about a situation. but this is just insane. either the connection from my computer to my hard drive is fried, Both my hard drives are fried or something in the softwares messed up. 
All im asking for is a solution... Thanks.
~Var
 

A:Hardware/Non Detection issue

The hard drive is indeed toast -- if you post the model number (i.e., Inspiron N5110, 5521, etc.) someone can recommend a replacement drive.
If you did not prepare a set of recovery media when the system was new, you'll also need to contact Dell to purchase that now, as you'll need it to reload the operating system once you replace the faulty drive.

Read other 1 answers
RELEVANCY SCORE 47.6

I just had to restart my computer after a system-wide lock-up, and after I booted back up, the OS refused to see my WIRED laser mouse! It's never done this before, and now, after restarting AGAIN, I find it STILL won't find it, or even my back-up mouse! Does anyone know why this is?

A:Driver Detection Issue

Hello NFSRacer,

Unfortunately I have yet the need to use Safe Mode in Windows 8, so I am going to give you a link that gives instructions on how to...

How To Boot Into Safe Mode On Windows 8 (The Easy Way) - How-To Geek

I would like you to attempt to load Windows in Safe Mode to see if the mouse is recognized at that point.

Also, this is a USB mouse? Have you tried other USB ports?

Read other 6 answers
RELEVANCY SCORE 47.6

Hi

I'm having problem finding the new HDD (additional one) in 'My Computer'. I connected an additional HDD into CPU and started my PC. After startup, it detected the new hard drive and installed (auto) and said 'Successfully installed' (in balloons). But now I don't see any icon for the new installed hard drive in 'my computer'. Then I shut down the pc, disconnected, then reconnected... did allover again. But the problem remains!

What might have gone wrong? Where's the problem! Please help me guys
 

Read other answers
RELEVANCY SCORE 47.6

Hi guys

I've a Macbook Pro with the Win7 build 7000 running on it. Everything works fine except the microphone detection of the Realtek HD adapter. the macbook pro only has 2 jacks. one for the headphones and the other should be the mic/line-in.

By plugging in the mic from my headset, the realtek audio manager just shows me an input device instead of the microphone.
The built-in mic from the macbook works fine, but I prefer using my headset for skype.

Is there any workaround to fix this issue? how can i "tell" the realtek audio manager, that the plugged device is a mic?

I already installed the lates realtek HD drivers (2.18) and tried to assign the mic/line-in manually over the registry (Realtek HD Changing Jack output reassignments ( FIX )), but nothing could solve this problem.

here are some screenshots which are describing the issue. yes it's a german installation :-)

many thanks

dumdidum

A:Realtek HD mic detection issue

Hi dumdidum and welcome to Se7en Forums

Referring to your first image, right-click on the BLUE socket and select Connector Retasking...

You should be able to set the appropriate option here.

Read other 4 answers
RELEVANCY SCORE 47.2

"Malicious tool kit variant activity 21" Invaded my PC. It redirects every time I click on a web page
Had "live chat" with a Norton tech for 2 hours. He installed, un-installed, and down loaded and finally said I was virus free.
An hour later I tried to surf and was redirected every time.
Is it possible that this virus is the property of Norton,(job security)
When I scan with Norton, finds and fixes 7 out of 8 infections and says on the 8th it says :no action required" meantime I still have the virus. I have tried rebooting in safe mode but that doesn't help either'


Help me, please.
"

A:malicious tool kit issue

To get help with help with cleaning out malware, Please follow our pre-posting process outlined here:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, please post the requested logs in the Virus/Trojan/Spyware Help forum, not here.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

Read other 1 answers
RELEVANCY SCORE 47.2

Hello, I am new to the forums today and I am hoping that I can find some help. At the moment my computer is infected with some malicious malware according to my Avira Antivirus. I am not wholey sure how I got this and am usually very proactive against getting my computer infected.

At the moment my Avira has been detecting "TR/Alureon.BF.2" "TR/Alureon.CF.1" and others with Alureon within the name of it. For the time being i've been quarenting them and denying access for them but the warnings continue to pop up.

Any help in removing this would be VERY appreciate. Thank you very much in advance for any response and help that you can offer.

Edit: Sorry I had just read the "Before posting thread" and I have the DDS files completed but I attempt to run Gmer and it does not run. It also does not show up in the "Processes" of the Task Manager at all.



DDS (Ver_09-07-30.01) - NTFSx86
Run by Owner at 21:50:57.39 on 10/08/2009
Internet Explorer: 8.0.6001.18813
Microsoft? Windows Vista? Ultimate 6.0.6000.0.1252.2.1033.18.2046.1084 [GMT -4:00]

AV: Avira AntiVir PersonalEdition *On-access scanning disabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}
SP: Lavasoft Ad-Watch Live! *disabled* (Updated) {67844DAE-4F77-4D69-9457-98E8CFFDAA22}
SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}
SP: Antispyware *disabled* (Updated) {FA98FA80-21C4-46FD-92B5-E115F1663BE4}

============== Running... Read more

A:Malicious Malware issue.

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

Due to the restrictions on Vista, all tools should be started by Right-Click >>> Run As Administrator

------------------------------------------------------

Delete your existing copy of gmer.exe from your desktop.

I need to see a gmer log in order to help you. Please run this special version of gmer.

Download GMER Rootkit Scanner from here and Save it to your Desktop. Double-click gmer.exe to run it. If asked to allow gmer.sys driver to load, please consent.
If it gives you a warning about rootkit activity and asks if you want to run scan...click on NO.



Click the image to enlarge it


In the right panel, you will see several boxes that have been checked. Uncheck the following ...Sections
IAT/EAT
Drives/Partition other than Systemdrive (typically C:\)
Show All (don't miss this one)

Then click the Scan button & wait for it to finish.
Once done click on the [Save..] button, and in the File name area, type in "Gmer.txt" or it will save as a .log file which cannot be uploaded to y... Read more

Read other 2 answers
RELEVANCY SCORE 46.8

Hello guys.
 
I have a small issue with a drive being detected from within my PC that works from an external caddie.
 
For a few years i have had two drives inside my system. C drive and F drive. I recently removed both drives when i went off to India for a few weeks for security reasons. Today i find the F drive is not showing up. It is listed under "Show hidden hardware" in the profiles. I opened up the PC and swapped the ribbon cables around and rebooted. It started to install new hardware and stated it had installed it because i seen the name of the installed hardware (The F drive) yet it was still not listed in "My Computer" alongside the C drive. I then removed it an placed in in an external caddie and booted again. I got the same install message ( I had uninstalled the driver prior just in case) and it installed from the caddie and works.
 
I can not run it from there because i have two other drives that need to be listed for my Music Studio when it scans for files needed to open past and present work that uses files located on those drives my name. The issue can not be the cables as they both run C drive internally. 
 
I will try again later to install it from inside the PC as my main slave drive but it seems null. The issue may be software based or configuration based. But so far , i am mystified by this issue. 
 
Any ideas?
 
Thanks in advance.

Read other answers
RELEVANCY SCORE 46.8

To enable movie viewing on 55" LCD TV

This is a pain in the rear for me but it is the only way to get the HDMI audio recognized as a valid option in Audio Playback devices. (Video always works but the audio is says not connected)

To get the HDMI Audio detected, I have to....
First - On my TV I have to select the HDMI channel that is connected to my PC
Second - I have to un-plug and plug-in the HDMI cable. (I can hear the Windows 7 found hardware sound)
Third - Now I can select HDMI as my default audio device (everything works great)
I usually have to repeat this process any time the PC or TV gets shut off. I am worried about wearing out the HDMI port by plugging and un[lugging so often. This can't possibly be the way it is supposed to work.

This is not an intermittant issue - it is a matter of the ATI HDMI detecting the audio connection and is very repeatable and consistant. All drivers ATI and VIA audio are the latest to date as of today.

Maybe it is the Plug&Play component - TV has to be on when turning on the PC or I have to manually force the detection process (as above)

Video = ATI 4550
MOBO = ASUS P7P55D-E LX

A:ATI HDMI Detection of Hardware issue

I have read many post on this issue and First of all yes the TV must be on at all times on the HDMI signal if you don't want the signal broken don't turn the tv off use you're power saving feature

Let windows turn the monitor off for you that way simple mouse movement will bring back the screen also you should be able to right click and disable onboard then enable the HDMI sound by right clicking

I might add using power saving feature is the only way to keep from breaking the HDMI connection also i don't advise any heibernation or sleep mode because that will just break the signal the best thing to do is let windows turn the monitor off but do not put your machine in sleep mode or any other power save featurn just treat your tv as a monitor

I find this the only and best way to work the ati cards and yes you keep unplugging and plugging the HDMI cable something is bound to go wrong eventually

Read other 2 answers
RELEVANCY SCORE 46.4

Error messages have been popping up for a while now saying how I am low on memory, but until now there have been no serious consequences. Now, I can only watch 1 YouTube video at a time and even then, it will usually crash after about 5 minutes. I can't have more than 1 tab open and in general the laptop is slower. It looks like the computer is only able to use 2GB of the 8GB that it knows is installed for some reason. Should I open it up and try to unplug and re plug the RAM back in? I've used CCleaner to clear anything that might be taking up memory and nothing is working. I've also done a full scan with Malwarebytes and come up with nothing. Any help is appreciated.

I am not sure what MOBO I have, but the laptop model is: Acer Aspire V5-573-9863

In addition to this memory issue, I used to have a problem where the CPU would sit at 60%-80% usage for no reason with no applications running, but that issue seems to have sorted itself out. Thought I might mention it just in case it is related. I just remembered that the CPU usage only jumps and sits when I open the Downloads folder in windows explorer, and I can fix it by restarting the Windows Explorer process, but if anyone has any tips on how to deal with that as well, I would appreciate it.

A:Oddly high RAM usage/ detection issue

Hi and Welcome to TSF!

Let's take a look at your system hardware specifications. Please follow this guide on how to get those specifications:

How to find your system specifications - Tech Support Forum

Read other 3 answers
RELEVANCY SCORE 46.4

I am trying to install a raptor x 150 in my computer. The motherboard picked it up, and windows picks it up. however Acronis does not and neither does the windows installation. I would like to clone the drive if that is possible but first the drive needs to be recognized.
I have formatted it in windows 7 64 as an active partition NTFS. Any help is greatly appreciated
 

A:Solved: Raptor X 150 and windows 7 64 Detection issue.

I fixed the Problem. I used Data lifegaurd tools. and just set the drive up for xp. then windows and Acronis picked it up Now I've got it set up and running smoothly on Win7 64.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Error messages have been popping up for a while now saying how I am low on memory, but until now there have been no serious consequences. Now, I can only watch 1 YouTube video at a time and even then, it will usually crash after about 5 minutes. I can't have more than 1 tab open and in general the laptop is slower. It looks like the computer is only able to use 2GB of the 8GB that it knows is installed for some reason. Should I open it up and try to unplug and re plug the RAM back in? I've used CCleaner to clear anything that might be taking up memory and nothing is working. I've also done a full scan with Malwarebytes and come up with nothing. Any help is appreciated.

I am not sure what MOBO I have, but the laptop model is: Acer Aspire V5-573-9863

In addition to this memory issue, I used to have a problem where the CPU would sit at 60%-80% usage for no reason with no applications running, but that issue seems to have sorted itself out. Thought I might mention it just in case it is related. I just remembered that the CPU usage only jumps and sits when I open the Downloads folder in windows explorer, and I can fix it by restarting the Windows Explorer process, but if anyone has any tips on how to deal with that as well, I would appreciate it.

A:Oddly high RAM usage/ detection issue

Hi and Welcome to TSF!

Let's take a look at your system hardware specifications. Please follow this guide on how to get those specifications:

How to find your system specifications - Tech Support Forum

Read other 3 answers
RELEVANCY SCORE 46

Hello all, First, I apologize for my english, I know I'm not the best at this language but I hope you will understand my problem.  I've got a Thinkpad T560. This laptop was with Windows 7 and I upgraded it to Windows 10. Unfortunately, when I plug my HDMI cable, I have the image on the second computer but no sound. All my drivers are up to date.Furthermore,  I can't find the HDMI device (my TV) in the taskbar  (I mean in the right-bottom corner).  I have tried a lot of solutions:- Update drivers- Click on the sound icon and show the disabled devices in the playback menu- Update drivers from Device Managers etc..  Could you please help me to find a solution ? Thanks.

Read other answers
RELEVANCY SCORE 46

we have disabled SSL2 & SSL3 and TLS 1.0 also in my server but still showing 20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue.
can you help me anyone ? 
Server SSL existing setting screenshot for your reference 

Read other answers
RELEVANCY SCORE 46

Good day,

I have an unusual situation with my HDMI and would like some advice or ideas.

I have 2 TVs with HDMI input, both LG (I believe 32LH20R and 22LH20R).

When I connect my hdmi to 22lh20r, the sound device says "not connected".
When I connect to 32lh20r, everything works fine.
If I connect to 22lh20r after connecting to 32lh20r, the sound device is now detected!
But when I reset my computer, the sound from 22lh20r says "not connected" again.

I tested two notebooks on it so far, and could reproduce on both. One with a GeForce 9600M GT and the other with a GeForce GT 540M.

I think that this could be some issue with the TV, but since it work after connecting to the other TV, I was thinking if there is a way to force the detection, or to force the driver from one TV to the other, or something like that.

Thanks in advance.
Gui

A:Issue with HDMI sound detection - unusual situation

Additional information:

I tryed to override EDID, with phoenix edid editor and monitor asset manager, but had no success with that. Turns out that they only collect the first 128 bytes from the edid, leaving the CEA extensions out, and this would be where the EDID stores whether the monitor has audio or not. =/

Also, it seems like it's not possible to "force" the playback device to "be detected", or at least I didn't find a way so far.

If anyone could help with EDID overriding, or this way to trick windows into believing HDMI sound is connected, I would appreciate a lot!

Thanks,
Gui

Read other 2 answers
RELEVANCY SCORE 45.6

Hi,
I got a problem with the Internet Explorer 11 installation I received through Windows Update. It is on a
Windows 7 x64 SP1 computer.
The installation failed, and Internet Explorer 11 doesn't appear under the Show Installed Updates section of Programs and Features.
Because of that, Windows Update tries to re-run the update, but keeps failing everytime.
My first idea was to download the IE 11 installer for Windows 7 x64 from Download Center and launch it; it fails with the error message "A more recent version of Internet Explorer is already installed".
When launching IE, effectively, the version is 11.0, but if I try to install an update for IE, like an IE 11 language pack or just a security update, it fails saying it doesn't apply to this system.
So basically, the IE installer detection logic says IE 11 is installed, while Windows Update says it is not, as for other updates related to IE 11. I have a tendency to believe Windows Update since it doesn't appear in Show Installed Updates.
I tried removing the HKLM\Software\Microsoft\Internet Explorer registry key and its equivalent under SYSWOW64, no result. I also deleted the iexplore.exe file under Program Files\Internet Explorer and Program Files (x86)\Internet Explorer, no result. Removing
those files is not easy since you have to take ownership on each of them because of the default permissions that are very tight.
Does someone knows the detection logic of the IE 11 ... Read more

A:How to force Internet Explorer 11 reinstallation after failure (detection issue)?

it sounds like IE11 is partially installed.
you may have some success by performing this uninstall method (expect a couple of warnings/errors during the process)
Open an elevated CMD console (Run as administrator)
FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*11.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /norestart"Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.

This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Read other 5 answers
RELEVANCY SCORE 45.2

I need to download the Windows Malicious Software Removal Tool for Windows 7 64-bit to distribute to other machines however because my machine is Windows 10 the download only offers me Windows 10 64-bit.

How do I get Windows 7 64-bit?

Read other answers
RELEVANCY SCORE 44.8

My laptop is T430 of Lenovo. I have two drives installed on my computer, one is SSD (128 G, PLEXTOR), another is HDD (500 G, Samsung). Now I have encountered a serious issue that I could not find the HDD in my Windows 10. Almost two weeks ago, I found my laptop crash frequently. I think there is an extreme incompatibility between the Windows 10 and SSD. I even reinstalled my OS for several times. But it still crashed. Even I opened a simple word file, it does not respond. Two days ago, the issue got even more serious. When I boot my system, I found a problem with "2100: Detection error on HDD0 (Main HDD)". It suggests me to press the "ESC" button to enter into the OS. However, I could not find my HDD on my computer anymore. I have some paramount important data and files in this drive.  Could some friends provide some meaningful suggestions of recovering data and files for me, please?  I'm very anxious. Thank you very much!

Read other answers
RELEVANCY SCORE 44.8

I've got a really strange problem, that makes it really difficult to post any diagnostic information about the problem. I've tried running HiJackThis, MalwareBytes anti-malware, Trendnet housecall online scanner, GMER, ad-aware, Spybot S&D, RootRepeal and dds.scr. The results are pretty much the same for all of these programs. The scan/analysis starts, sometimes it gets partway through scanning, and then the application window gets closed. After this happens, in the case of .exe files, the resulting program is rendered useless, in that further attempts to launch it result in a "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." and you also cannot rename, or delete the file.

Trend-net housecall is also pretty interesting, in that it runs inside the browser, and after it was terminated (part way through the scan) iexplore.exe now exhibits the same error in not being able to launch. This not being able to launch persists across reboots also. I then installed firefox.exe on the system, was using it for a brief period, tried trend-net housecall and now it too is showing the error in not being able to launch.

dds.scr is able to be to be re-launched, and it brings up the black command window type screen, but never brings up the notepad windows. It seems unaffected by the termination behaviour, and is able to be re-launched.

I was able to run A2 anti-trojan, and do have a log of what it... Read more

A:Strange malware issue - unable to use detection tools or virus scanners

Hi Thomas Lovie,Welcome to BC HijackThis forum. I am farbar. I am going to assist you with your problem.Please refrain from making any changes to your system (updating Windows, installing applications, removing files, etc.) from now on as it might prolong handling your log and make the job for both of us more difficult.I share your academic interest. So let's have a go at it.Download and run Win32kDiag: Download Win32kDiag from any of the following locations and save it to your Desktop. Download Win32kDiag (Win32kDiag.exe) - #1 Download Win32kDiag (Win32kDiag.exe) - #2 Download Win32kDiag (Win32kDiag.exe) - #3 Double-click Win32kDiag.exe to run Win32kDiag and let it finish. When it states "Finished! Press any key to exit...", press any key on your keyboard to close the program. Double-click on the Win32kDiag.txt file that is located on your Desktop and post the entire contents of that log as a reply to this topic.Next......

Also post the A2 anti-trojan log.

Read other 30 answers
RELEVANCY SCORE 44.8

Hello
I want to put info in easy to read format as below:

Personal profile
----------------
I am not a newbie to computers and have been using/modding OS/hardware since last 10yrs or so (though personal desktop/mobile/tablets only). Everything from Formatting, imaging, troubleshooting(though stuck on this), Ramdisks, water cooling, etc etc etc.
So when i inform you of the situation below , you can take it that what i am writing below is the exact scenario.

Computer Profile------------------
TSG Report:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft(R) Windows(R) XP Professional x64 Edition, Service Pack 2, 64 bit
Processor: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz, EM64T Family 6 Model 30 Stepping 5
Processor Count: 4
RAM: 16374 Mb
Graphics Card: ATI Radeon HD 5400 Series, 1024 Mb
Hard Drives:
C: Total - 61055 MB, Free - 51011 MB;
D: Total - 10252 MB, Free - 384 MB;
E: Total - 216587 MB, Free - 6254 MB;
F: Total - 61051 MB, Free - 6068 MB;
G: Total - 153699 MB, Free - 10033 MB;
H: Total - 21289 MB, Free - 7471 MB;
I: Total - 717818 MB, Free - 675210 MB;
J: Total - 11633 MB, Free - 11552 MB;
R: Total - 7169 MB, Free - 6087 MB;
Motherboard: ASUSTeK Computer INC., P7H55
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Everest Report:
See attachment for Full Computer configuration (including bios and hardware)
View attachment Report.txt

just in case, CPU Overclocked by ~ 27-30% to 3.4 to 3.6 Ghz &
FSB to 200Mhz (50... Read more

A:Kingston SSD and Asus AMI BIOS detection Issue (NTLDR)> Very weird> Not a Noob> Help

No SP3?

Anyway this will bump you.
 

Read other 2 answers
RELEVANCY SCORE 44.8

Hello
I have windows xp sp 2 running. I did have xp sp 3 installed and running, but took my system back through a system restore point because I thought maybe the new SP 3 download was causing this issue.

Every single time I get this update (i think it is KB893090..) and try to install it, it will freeze my system and I have to reboot. I have tried manually installing it from the website and through Windows Automatic Update and no matter which way I choose it will not install properly.

It will initialize and then just stay on the screen saying OVERALL PROGRESS of the download, with no progress ever showing, no green bar ever appearing..the screen will never change or give me any errror messages, my computer just freezes and will stay like that until I reboot it through the power button. I can't even use the shutdown method.

I am running Comodo Pro Firewall, AVG 8.0 free...I also have Spybot S and D and SpywareGuard on my system
Does anyone know why this would be happening?

Any info would be greatly appreciated
thanks

A:Microsoft Malicious Tool Remover Update Causing Massive Issue

Try to download it manually again, only download it to the Desktop, reboot to safemode, then install it. See if that works

Read other 1 answers
RELEVANCY SCORE 44.8

I am having an issue which is causing computer slow downs, pop ups and all sorts the main information is as follows:
- Constant pop ups from malware bytes blocking websites, most notably :\Windows\System32\svchost.exe and (x86)\Google\Chrome\Application\chrome.exe

I have tried various scans from malware bytes, bitdefender, avast, AVG, TDSSKiller. All to no avail. I wasn't using any of these antivirus software in conjunction with one another.
 

A:Malicious Website Protection pop up all the time. Possible infection. Cant remove. System 32 issue

These are the pop ups i am getting.

Malwarebytes Anti-Malware
www.malwarebytes.org
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63501, Outbound, C:\Program Files (x86)\Google\Chrome\Application\chrome.exe,
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63501, Outbound, C:\Program Files (x86)\Google\Chrome\Application\chrome.exe,
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63502, Outbound, C:\Program Files (x86)\Google\Chrome\Application\chrome.exe,
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63503, Outbound, C:\Program Files (x86)\Google\Chrome\Application\chrome.exe,
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63504, Outbound, C:\Program Files (x86)\Google\Chrome\Application\chrome.exe,
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63554, Outbound, C:\Program Files (x86)\Google\Chrome\Application\chrome.exe,
Detection, 14/03/2016 17:15, SYSTEM, PETER-PC, Protection, Malicious Website Protection, Domain, 204.13.194.231, ad.directrev.com, 63555, Outbound, C:\Pro... Read more

Read other 1 answers
RELEVANCY SCORE 44

I am having difficulty with my ASUS SDRW-08D1S-U external optical drive. My computer is an ASUS UL30A notebook with Windows 7. The strange thing is that it was working initially, but now a few days later, it stopped working for some reason. If I go to My Computer, I can see my harddrives (C and D) listed, but not my optical drive. If I go to Control Panel, and click on Devices and Printers, I see my optical drive listed under Devices as SDRW-08D1S-U, with a small yellow triangle icon with an exclamation point on it. If I double click on it, and then click on the Hardware tab, it states at the bottom – “Device Status: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.” If I click on the Properties button, it basically says the same thing, with the addition of: (Code 39). I have tried updating the driver, and it states that I have the appropriate and latest driver. I have tried disabling and enabling driver. I have tried right clicking on the icon and Troubleshooting.

Finally, I tried uninstalling the driver. And then when I plugged the drive back in, it states that the “Device driver software was not successfully installed.”

I am using the supplied USB Y cable with both ends plugged in. I have tried it also with only one of the two ends plugged in, and also with regular non-Y configuration USB cables.

I will add that I never installed the original software on the CD that came with the drive. I was about to install it when ... Read more

A:Driver detection/loading issue with ASUS SDRW-08D1S-U external optical drive

No replies yet...I guess there is no easy fix for this... I'll probably put up the drive for sale and get something else...
 

Read other 3 answers
RELEVANCY SCORE 43.2

Okay i have turned my pc on after not having it on in 3 months (due to having to buy a new graphics card) anyway everything was running smooth untill i heard a few beeps only to see that avira has detected few viruses i had a choice to either remove or ignore so i pushed remove 10 minutes later avira is detecting the virus again so i click remove and then do a quick scan with Malwarebytes and it did not detect anything so i did a full scan with my Avira Anti Virus and it found 1 warning 13 hidden files and 30 detections now i would like to know what to do from here to completely get rid of the 30 detections that it has found the two that it has detected look like this: TR/BHO.ZWANGI.Trojan TR/GerVar.EJ Trojan there are 30 of them in my Avira quarantine so what i would like to know is where to go from here thank you.DDS (Ver_10-03-17.01) - NTFSx86 Run by DJ at 19:40:17.32 on Thu 09/09/2010Internet Explorer: 7.0.5730.13 BrowserJavaVersion: 1.6.0_20Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1023.518 [GMT -7:00]AV: AntiVir Desktop *On-access scanning enabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}============== Running Processes ===============C:\WINDOWS\system32\nvsvc32.exeC:\windows\system32\svchost -k DcomLaunchC:\windows\system32\svchost -k rpcssC:\windows\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\windows\system32\spoolsv.exeC:\Program Files\Avira&... Read more

A:avira virus detection beeps with detection pop ups

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEmsconfigsafebootminimalactivexdrivers32netsvcs%SYSTEMDRIVE%\*.exe/md5st... Read more

Read other 2 answers
RELEVANCY SCORE 43.2

Okay i have turned my pc on after not having it on in 3 months (due to having to buy a new graphics card) anyway everything was running smooth untill i heard a few beeps only to see that avira has detected few viruses i had a choice to either remove or ignore so i pushed remove 10 minutes later avira is detecting the virus again so i click remove and then do a quick scan with Malwarebytes and it did not detect anything so i did a full scan with my Avira Anti Virus and it found 1 warning 13 hidden files and 30 detections now i would like to know what to do from here to completely get rid of the 30 detections that it has found the two that it has detected look like this: TR/BHO.ZWANGI.Trojan TR/GerVar.EJ Trojan there are 30 of them in my Avira quarantine so what i would like to know is where to go from here thank you.

A:avira virus detection beeps with detection pop ups

Hello,Please follow the instructions in ==>This Guide<==.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<==If you can produce at least some of the logs, then please create the new topic. If you cannot produce any of the logs, then post back here and we will provide you with further instructions.

Read other 2 answers
RELEVANCY SCORE 40.8

I recently bought a new DVD RW drive to replace my old one which had a burnt out laser. When I put in the drives I set up my secondary hard drive and my new drive as cable select and attached the master connector to the hard drive and the slave connector to the DVD. I booted the system and immediately got a boot error saying it couldn't locate either of the IDE drives. So, I spent the next hour or so trying every possible jumper combination setting and got the error no matter what upon boot. Finally I put them both back to CS and just skipped past the error because I was sick of messing with it. To my surprise, the drives showed up in My Computer and functioned but at a very very slow speed. I ran a PC Pitstop scan and it showed a drive speed of 2mb/sec which is really slow. So, clearly something isn't being detected properly. For some reason also, my BIOS doesn't have any "auto-detect" option to try to detect attached drives so in the BIOS it just has two unknown devices attached to the primary and slave IDE drives.

Any help would be much appreciated.... thanks !
THanks
 

A:Solved: IDE Hard Drive and CD drive detection issue

And the make and Model of your PC???????

my BIOS doesn't have any "auto-detect"Click to expand...

use "Load defaults"
 

Read other 2 answers
RELEVANCY SCORE 30.8

Hello,

I've installed ATA Center 1.7.2 and Ata Lightweight Gateway on my DC.
Everything installed correctly, I don't find any errors in both gateway and ata center logs.

The problem I have is that I can't seem to get any alerts. I've tried both logging in with one honeycomb account and listing a DNS zone.
In the the database I dont have any NTLM events.
Can someone help me?

THank you

Read other answers
RELEVANCY SCORE 30.8

Hi  a small business i do IT work for were hit with a Crypto virus zendrz file, its now removed and all data restored, im just wondering, whats the best AV or tool to detect and stop these infections before they get on to the system

A:Detection

The best defensive strategy to protect yourself from malware and ransomware (crypto malware) infections is a comprehensive approach. Make sure you are running an updated anti-virus and anti-malware product, update all vulnerable software, use supplemental security tools with anti-exploitation features capable of stopping (preventing) infection before it can cause any damage, close RDP if you do not need it, use secure passwords and routinely backup your data...then disconnect the external drive when the backup is completed. If you must use RDP, the best way to secure it is to either whitelist IP's on a firewall or not expose it to the Internet. Put RDP behind a firewall, only allow RDP from local traffic, setup a VPN to the firewall and enforce strong password policies, especially on any admin accounts or those with RDP priveledges.

Read other answers
RELEVANCY SCORE 30.8

Hey yall,Im having some problems with the conficker worm. I have cleaned it from my computer and several other pcs. and have Symantec Endpoint installed on them.But im having an issue when i log in to the pcs, symantec says there were detections while i was logged out. When i check the logs it says it was the conficker. Is there any program i can use to detect where these infections are coming from? Looks like symantec is blocking it. But its getting sent from some pc on my network. and i do not know which one Any help would be appreciated thanks! ---PandaPS Sorry if this is the wrong section for this type of post

A:IP Detection?

Hackers use "port scanning" to search for vulnerable computers with open ports using IP addresses or a group of random IP address ranges so they can break in and install malicious programs (viruses, Trojans). Botnets and Zombie computers scour the net, randomly scanning a block of IP addresses, searching for vulnerable ports - commonly probed ports and make repeated attempts to access them. If your computer is sending out large amounts of data, this usually indicates that your system may have a virus or a Trojan horse.If your firewall provides an alert which indicates it has blocked access to a port that does not necessarily mean your system has been compromised. The alerts allow the firewall to notify you in various ways about possible penetration and intrusion attempts on your computer. It is not unusual for a firewall to provide numerous alerts regarding such attempted access. However, not all unrequested traffic is malevolent. Even your ISP will send out regular checks to see if your computer is still there, so you may need to investigate an attempted intrusion. You can use netstat, a command-line tool that displays incoming and outgoing network connections, from a command prompt to obtain Local/Foreign Addresses, PID and listening state.netstat /? lists all available parameters that can be used.netstat -a lists all active TCP connections and the TCP and UDP ports on which the computer is listening.netstat -b lists all active TCP connections, Foreign Address, St... Read more

Read other 3 answers
RELEVANCY SCORE 30.8

In our version of ATA (1.7.5757.57477 Standard) under Detection Exclusions we no longer have the option for Short Term Lease exclusions was there a reason this feature was removed or can we change our version to have it included once again?

Wes

Read other answers
RELEVANCY SCORE 30.8

i have a wipro pc that is dual core , windows xp starter edition , 1 gb ram , the bios detects 1024 mb of ram but windows says its only 512 mb.. what happened to the rest 512 mb?? please help

A:ram detection

as it been associated with your video card by the bios

Read other 1 answers
RELEVANCY SCORE 30.8

ok i know there is a harddive in my computer but when it boots up and i go into bios. i try to detect it but it's not there. it detects the cd burner when its hooked up to the same place as the harddrive was , with th same cord also, it will detect cd burners and stuff but not harddrives. i've also tried differnt harddrives. also when i let it boot up it says no boot record on ide , cd , or floppy even though a mandrake 10.1 install cd is in the cd drive.
do i have to do something to make it detect the mandrake cd. it's searching for the boot record so maybe it doesn't want to see mandrake. but any help would be usefull.
Thanks.
 

A:no ide detection

Your IDE controller may be going bad. That is if you have actually set the jumpers on the hard drive correctly, honour the plug order for 80-wire cable and have set the computer to actually try to boot from the CD or floppy.

You should try with another bootable CD too in case the one you have is bad.
 

Read other 6 answers
RELEVANCY SCORE 30.8

i have a custom system and i had some bios problems and i finnaly fixed it but now my computer cant detect any IDE devices. what should i do?
 

A:No IDE detection

I am new to this site as well but I do know some things. Make sure your bios settings enable plug and play devices in windows xp. Check the settings in the bios before you start your computer.
 

Read other 7 answers
RELEVANCY SCORE 30.8

I have purchased a Idea
pad U310, and i have troubles when change the place to conect to a wireless network
In my office i must to input the IP every time , in my house i can't conect to my wireless network and i must change the configuration again.
What can I do to solve this??

Configuraci¢n IP de Windows

Nombre de host. . . . . . . . . : usuario-PC
Sufijo DNS principal . . . . . :
Tipo de nodo. . . . . . . . . . : h¡brido
Enrutamiento IP habilitado. . . : no
Proxy WINS habilitado . . . . . : no
Lista de b£squeda de sufijos DNS: interno.rqc.com

Adaptador de Ethernet Conexi¢n de *rea local:

Estado de los medios. . . . . . . . . . . : medios desconectados
Sufijo DNS espec¡fico para la conexi¢n. . :
Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe FE Family Controller
Direcci¢n f¡sica. . . . . . . . . . . . . : 04-7D-7B-B7-9C-98
DHCP habilitado . . . . . . . . . . . . . : s¡
Configuraci¢n autom*tica habilitada . . . : s¡

Adaptador de LAN inal*mbrica Conexi¢n de red inal*mbrica:

Sufijo DNS espec¡fico para la conexi¢n. . : interno.rqc.com
Descripci¢n . . . . . . . . . . . . . . . : Atheros AR9485WB-EG Wireless Network Adapter
Direcci¢n f¡sica. . . . . . . . . . . . . : 20-16-D8-7F-E5-96
DHCP habilitado . . . . . . . . . . . . . : s¡
Configuraci¢n autom*tica habilitada . . . : s¡
V¡nculo: direcci¢n IPv6 local. . . : fe80::e03f:b607:125b:db55%13(Preferido)
Direcci¢n IPv4. . . . . . . . . . . . . . : 192.168.0.75(Preferido)
M*scara d... Read more

A:IP detection

please do not report your post
it also mentioned in the report screen
Please use this form ONLY to request a Moderator in case of a problem. Reasons can include: requesting a thread be moved or closed, report advertising messages, and problematic (harassment, fighting, or rude) posts. This is not a method of requesting technical assistance! Thanks!Click to expand...

i have moved your thread to a post of its own - this avoids confusion with trying to deal with two problems for two different users
 

Read other 1 answers
RELEVANCY SCORE 30.8

months ago my MB got fried and had to be replaced, its fine now, but when im pressing many keys at a time, it wont detect one of them, and then somtimes it stops working and I have to re-plugin the usb and it works fine again, does anyone know what the problem could be? if you need more information just ask

edit: uhm, sometimes it works fine and it detects all the keys, it just happends every now and then and when i restart its fine again
 

A:key detection

Read other 6 answers
RELEVANCY SCORE 30.8

Please Disregard the Screenshot as these are not current but the Win32/Patched.Al is, however I rescanned the same email and it did not find anything ??I believe that when I opened or tried to open an e-mail during and in the effort to save it to my desktop, to be certain I could right click and have it scanned by AVG, since I found it in my spam box.As I viewed it in my mail box I did not see the AVG message at the bottom of the email, (reason I saved it to Desktop).A pop up AVG message reported that I had received an Win32/Patched.Al , whereby I moved it to my AVG vault.Does that mean it is no longer, . . that is if it actually wound up there, . . Please tell me as I'm not sure what I am looking at.

A:AVG Detection

If Win32/Patched.Al is currently in the virus vault, you are OK

Read other 1 answers
RELEVANCY SCORE 30.8

Hi  a small business i do IT work for were hit with a Crypto virus zendrz file, its now removed and all data restored, im just wondering, whats the best AV or tool to detect and stop these infections before they get on to the system

Read other answers
RELEVANCY SCORE 30.8

I got this new Phillips 20 inch Lcd Tv and i was planning on using it as my monitor also.
Model is 20pf5120/28
When my comp starts i can go into the bios using the monitor. But when the windows xp is done loading it says no video detected. I uninstalled the video drivers and booted in safe mode and was able to get windows started using the new tv. But when i tried to reinstall the display drivers it cut off the screen during installation to show that there was no video detected.

What is the problem anyone know? Maby i need new drivers off the internet. Mine were from the cd.
 

A:LCD TV: No Detection

Make sure that the refresh rate is low, LCD have no need for a high rate, stick to 60 Hz.

Higher rates will cause an LCD monitor to blank, although the usual message is "out of range", that may differ with the TV.

But a 20" TV with 800 x 600 resolution (and you have to use that "native resolution" with that LCD) is going to look - well, horrible, I predict.
 

Read other 1 answers
RELEVANCY SCORE 30.8

Hello! I have a Gateway GT4224m, since I got it the fan was really noisy and used to burst and stop completely.

Asked support and they said it was ok, so, got used to the huge noise and bursts every 15-20 seconds.

Anyway, the fan was detected by speedfan and lavalys Everest program. Now, the fan is dead and i replaced it with a CoolerMaster Blade Master 80.

The fan is running smoothly no big busts, but now that i tried to check speedfan and Everest, the fan is not detected at all.

Did i do something wrong replacing it? Or do i need to install some sort of driver for the cpu fan to be recognized?

There is no error messages so far. And temperature fell down from 70°C to 34°, before it used to be 41" with the noisy fan.

Thanks!
 

A:Detection of a new CPU fan

Did you plug the new fan into the same fan header as the old one? Is it plugged into the motherboard?
 

Read other 9 answers
RELEVANCY SCORE 30.8

Hi, I am having problem with my USB Ports. It can detect every old hardware that it has auto installed but recently it does not detect my new webcam and mp3 player when i plug them in. But the power is running perfectly alright. What should I do?

A:Usb Detection

do you mean you can plug your usb printer in ,turn it on and it works fine, turn it off and plug your mp3 player in to the same port and then turn it on and it will not be recognized. make sure these things are removed properly (safely remove hardware) and if they were not you may have to uninstall then re-install the software
for these devices.

Read other 5 answers
RELEVANCY SCORE 30.8

Hello there.

I think something has found its way into my system I just donloaded a simple wav and a window poped up saying 'External protocol request' so I clicked on cancel ut I'm now a little suspicious. Please could you have a look and see if my log is clean. Many Thanks.

Faith.

MyHJT log is below

Logfile of HijackThis v1.99.1
Scan saved at 09:46:18, on 01/12/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\WINDOWS\system32\DRIVERS\CDANTSRV.EXE
C:\Program Files\D-Tools\daemon.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\UAService7.exe
C:\Program Files\SpywareGuard\sgmain.exe
C:\Program Files\SpywareGuard\sgbhp.exe
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_SICN03.EXE
C:\Program Files\Google\Google Desktop Search\GoogleDesktopIndex.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesk... Read more

A:malicious something or other!!!!

I would reccommend that you Subscribe to this thread so you are notified of any replies via email. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Please go to Jotti File Scan. Click Browse then browse to this file:

C:\WINDOWS\system32\Poetry.scr

Click Open, then click Submit. copy and paste the results of the scan here.

Trend Micro? Anti-Spyware for the Web Utility (by clicking the "Scan and Clean your PC" button).Save it to your desktop.
Double-click the new icon on your desktop (tmas-web-scan.exe)
It will say "Loading TrendMicro definitions".
Once the definitions are loaded, the program will appear to close then re-open.
Click "Start Scan"
After it's done scanning, click "Scan Results"
Make sure all items found have a check next to them, then click "Clean Threats Now".
Click Exit.
Reboot your computer. In place of the TrendMicro icon will be a text file called "Antispyware.log", please double-click that log and copy the entire contents and paste them here.

I then need you to repeat the same procedure above again... using the TrendMicro tool. I need the log from the second scan/clean...NOT the first...as this will contain what?s left in the system.

Please open IE and go to
Kaspersky WebScanner

Next Click on Kaspersky Online Scanner

You will be prompted to install an ActiveX component from Kaspersky, ... Read more

Read other 4 answers
RELEVANCY SCORE 30.8

Anybody know of any current P2P programs out there that aren't full of spyware/adware? Or at least are reasonably safe to use?
 

A:Least Malicious P2P

TSG does NOT support P2P file sharing programs!
 

Read other 2 answers
RELEVANCY SCORE 30.8

I had a question running in my mind from many days but didn't find the answer could any one tell me is there anything like MALICIOUS KEY like there is malicious softwares....malicious key I mean to say like it is entered into system during installation so it will change or install something that can be harmfull or may send some unwanted info

A:Malicious Key

A malicious key is in a malicious software. the malicious key gets access to your system with a potential password. then it infects your computers files and others. And Steals your personal info.

Read other 2 answers