Over 1 million tech questions and answers.

M90p Desktop (ThinkCentre) ethernet disconnecting ...

Q: M90p Desktop (ThinkCentre) ethernet disconnecting ...

I'm working on an issue with a Lenovo M90p desktop running Windows 7 64bit. It's connected via cable to a router that works for other devices. the cable has been tested with other devices, so I've narrowed the issue down to this physical device. The Windows troubleshooter is unable to fix the problemI tried to disable and reenable the network adapterI've tried to restore to a point in time before the issue started which didn't change anything.I've tried to uninstall the adapter via device manager and rebooted but Windows couldn't find the driver by itself. I've downloaded the intel ethernet driver from lenovo site manually from a different computer and installed it but it didn't change anything.Do you have any suggestions to possible next steps?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: M90p Desktop (ThinkCentre) ethernet disconnecting ...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 89.2

Good day  Issue with 100% cpu and system fan which started happening yesterday.  Combined fans sound like a small Jet Engine Things that may of caused this issueUpgrade Bios from 5JKT64A(ithink) to 5JKT65A (02 Sep 2014)Put in a 1050TI video card to test withReloaded bios defaultsplayed with Intel AMT/ME settings (turned off/reset)Power off at wrong time Things I've tried to solve the issueRedone the heat sync cpu paste (was dried out)Used one stick in Bank 1 (closest memory blue slot to CPU)Have tried different memory sticksTried the M58 reset steps (Power down, yank battery, set cmos jumper to 2/3 etc - had a M58 which had the same issue and was able to fix) but no luck.played with Intel AMT/ME settings (turned off/reset)Has anyone else had this issue, and been able to succesffuly fix the issue? Any assistance is appreicated as this is driving me NUTTS! Paul M90p Desktop (ThinkCentre)  - Machine Type Model: 5498RS2

Read other answers
RELEVANCY SCORE 72.4

Help. at the moment i have win7 ultimate installed and its not genuine. Lenovo has send me 3 cd's1 (disc 1 of 2) - Application and Drivers Recovery Disc1 (disc 2 of 2) -  Application and Drivers Recovery Disc2 (disc 1 of 1) - Operating system recovery disc - Windows 7 pro sp1 on the cover of the cd that Lenovo has sent me only covers M83, M93/p, M73p How do I downgrade my operating system from win 7 ultimate to factory setting win 7 pro?

Read other answers
RELEVANCY SCORE 72.4

I have a ThinkCentre M90p on Windows10 Home that no longer sees cd's or dvd's in the drive. I've been searching for fixes for a couple days now, and none of those worked. The Device Mgr sees the drive, drivers are up to date. I've uninstalled the drive (through Device Mgr) and rebooted, it reinstalled but still does not detect a DVD in the tray. I've tried a Driver collection program (1-click find and install) but it didn't find any problems with that particular driver, I've tried a Registry fixing program but it didn't find any problems to fix there. I know it worked when I bought it because I looked at a couple of old picture cds then(July/17), but haven't needed it again until yesterday. I did find a post about cleaning the lens, but I have no clue about taking the drive apart to get in there to do that so I thought I'd ask here if there were any other ideas first.

Read other answers
RELEVANCY SCORE 71.6

HiI have tried to install a AMD ATI Radeon R7 250 2GB graphic card in my Thinkcentre M90P Desktop. (AMD ATI RADEON R7 250 2GB PCI-E DVI DISPLAYPORT VIDEO CARD 9C8C0 7121A00400G USA) But the PC doesn't boot with this installed.I have tried with a bigger PSU. I have updated BIOS to latest version. But nothing helps. How can I make it work? 

Read other answers
RELEVANCY SCORE 71.6

I currently have 2gb sticks of  PC3-10700 ram in my M90p even though the Lenovo website thinks I have one 4 gb stick. Speccy used to detect them.   How much capacity doe the M90P have?  Will it take two 4gb sticks?  BTW, I'm running Windoews 10 Home. I've read conflicting stories.   Thanks.    Gary

A:Thinkcentre M90P 3853 ram capacity???

8GB max.  Detailed specifications - ThinkCentre M90p (3269, 3257, 3557, 3853,, 5296, 6673)

Read other 1 answers
RELEVANCY SCORE 71.6

Hello i have Lenovo Thinkcentre M90P whith Intel Pentium G6950 250GB HD  and 2GB of 1066mhz DDR3 RAM i think its Hynix? Recently i bought a 4GB Crucial DDR3 stick 1600mhz  . http://www.crucial.com/usa/en/ct51264ba160b  I took out the old RAM and put in this new one but the PC doesnt get into windows anymore and just keep rebooting if I install the old RAM back everything works perfect. I tought that MHZ shouldnt be a problem and that the new ram will be downgraded to 1333mhz (max supported i think). Maybe any BIOS update would work or what should i do?  Thanks for help!

Read other answers
RELEVANCY SCORE 70.8

Puchased 2 Think Centres from a local university. No operating system on either. Tried installing Win 10 with media creation tool on flash drive then the ISO on DVD. The Windows logo comes on the screen and freezes. After about a min, it says something went wrong and restarts only to the same result. Someone said I need drivers but can you install drivers without an operating system installed? the units originally had Win 7.  
 
Mod:  edited Subject line to add system type
 

A:ThinkCentre M90p: clean Win 10 install freezes

Your systems may not be supported for Windows 10, you can check here:  Windows 10 Upgrade - Supported System List

Read other 3 answers
RELEVANCY SCORE 70.8

i'm planning to get a new processor for my pc. would the latest processors be compatible with the motherboard as long as it fits a lg1156 socket? edit: its a type 5536a cpu. one with i5 660 dual core 3.3ghz

A:m90p thinkcentre 5536 cpu upgrade suggestions?

edit: its a type 5536a cpu. one with i5 660 dual core 3.3ghz

Read other 1 answers
RELEVANCY SCORE 69.6

Hi everyone - I am having one heck of a time with these ThinkCentre M90p units when trying to upgrade to the latest (Creators) build of Windows 10.  They keep losing the MBR and thus show the primary partition as "RAW" instead of NTFS as it should be.  This happens about half way through the upgrade when the system reboots.  It comes up to a BSOD 0XC000000F immediately upon attempting boot - this is, of course, because the primary partition is unreadable. Now, I have seen at least 8 of these systems do the exact same thing.  All hardware passes diagnostics with flying colors, so I know it's not a failing hardware issue.  I have done some Googling and have found where other people are having a similar issue, but none of them mention this particular model of Lenovo ThinkCentre. To test further, I did a FRESH install using an Anniversary build (1511) and then ran the latest upgrade to Creators (1607) from inside the freshly installed 1511 build.  The same problem occurs every single time.  Any ideas?  I know some of the posts I've found online state that running Windows in UEFI mode with GPT takes care of the problem.  The issue is that these units do not support UEFI (at least from what I can tell...)  Thanks in advance for any assistance that you can provide!

Read other answers
RELEVANCY SCORE 68

I want to upgrade my Lenovo m90p usff eco with a graphics card, but it's just PCI Slot. I bought a SPARKLE geforce 8400gs PCI low profile and BIOS did not recognize it. I installed OS X Yosemite and I need the graphical acceleration. Which card can be compatible?

Read other answers
RELEVANCY SCORE 68

Dear community, I found a M90p USFF system board in the garbage, fully functional when tested. But without the case or anything else. Repairing, especially old hardware, is something I really value: make something work without having to buy new stuff. I was planning to build my own home-theater mini-pc, and already have standard USB-Audio Front I/O panels, and power buttons, and almost all the rest.Lucky me, so I only need the heatsink, power adapter, and the pinout for USB, Audio and power (the system board was set to restore power automatically, so I could test. But eventually, I want to switch it on with a power button like a normal computer). - I found https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/ThinkCentre-front-panel-connector-power-audi...but the number of pins is not correct.- Pictures I found of the Front I/O 45J9567 are not good enough to really see anything. All wires are within a plastic tube, so no luck either. Can somebody help me out? Are there schematics of the system board? Nowhere I found information of the pins. AC97/HD audio headers look differently, and USB headers normally have a 5+4 pinout (with the M90p USFF it's only 4+4). The hardware manuals I found, only describe the set of headers, but not the exact pinout. kind regards,Tim

Read other answers
RELEVANCY SCORE 59.2

Hi all,for better graphical performance, i wanted to install a PCIe graphic card  (Zotac geoforce GT610) to my ThinkCentre M90p Destktop. I tried to install drivers but failed, message was "No compatible hardware found".I supect, the graphic card is not compatible to my system. On Lenovo's homepage there is an Option Compatility Matrix  https://support.lenovo.com/at/de/documents/um006391but I failed in opening the related .xlsx file ("too many different cell formats"). Is there any whitelist of compatible graphic cards in .xls format or .pdf ?? Any other ideas?? Plese help!My OS is Win7 Pro x64 

A:Graphics Card for M90P Desktop

Generally it will fail POST if the card is not compatible.   Are you certain it is installed all the way into the slot?  Perhaps reseat it.  

Read other 1 answers
RELEVANCY SCORE 57.6

I currently have the desktop not the tower. I would like a midtower so I am not limited with psu or gpu choices.

Read other answers
RELEVANCY SCORE 54.4

[SOLVED] Realtek PCIe GBE Family Controller [SOLVED]

Hello, i'll try to describe the problem the best i can.. Sorry if my english isn't too good (im venezuelan) i've been trying to get help from other forums and can't find a fix for this..

The internet keeps disconnecting, the actual problem is that i get a system tray message saying ''Your cable isn't connected''.. I mean the RJ45 IS plugged in -.-..

All i do is Deactivate, then Activate the Local area network and boom, it works again..

I want this to stop, i downgraded from Windows 7 to XP to see if it was a W7 problem, but happens the same on XP (In W7 i had to reboot the PC completely so it would turn on again, here on XP just Deactivate -> Activate)..

I'd be very grateful if i get some help on this, this is a 1 month old PC..

Specs:
Phenom II X4 955 3.2Ghz
MSI NF725GM-P43
4Gb Ddr3 1333 Ram
800w Omega PSU
Geforce 8400 Gs 1GB - DDR3

To me, it seems like it's a Mobo problem, but, it's just weird.. The guy that sold it to me said that it happened a couple times to him but he installed ''Fix it'', dunno if it's the ''Microsoft Fix It center'' or another software ><..

Thx for reading, some help is appreciated i wanna play online w/o disconnecting so much ..

Ps [Edit]: Ok, now, i was running desperado's 2: Cooper's Revenge, and it went full screen, the connection was lost again, after i closed t... Read more

Read other answers
RELEVANCY SCORE 54

Servispack 1Windows xp profesional 32.bit

Read other answers
RELEVANCY SCORE 53.6

(Before i start, i have checked multiple threads on this site about my problem but none atm have seemed to work, im sorry if this topic arrises constantly but i have done a search but my problem still presists.)

Hi,

My problem has been going on roughly since i aquired the laptop but im sure that it isn't a hardware fault as it is both the ethernet and wireless adapter having problems.

My ethernet will disconnect usually once or twice a day usually an hour after the laptop has been turned on. After that it won't disconnect again.
The wireless internet will disconnect more often and it is random as to when it will happen.

The disconnection happens like this,
Unable to browse the web using any internet browser like firefox or internet explorer
Any online game i play kicks me from the server to a login screen (if the game has one)
However, the laptop still shows a stable connection to the ethernet/wireless. It will show the yellow triangle with an exclamation mark for a second then show a stabe connection.

Laptop Specs;

Windows 7 64-bit
AMD Athlon II Dual-core M320 2.1 GHz
4GB RAM
Wireless Adapter - Atheros AR9285
Ethernet Adapter - Realtek PCIe FE Family Controller

So far i have tried;

Updating all devices,
Uninstalled the devices and re-installed,
Unistalled Anti-virus software,
Disabled Firewalls,
Changing Channels on the router,
Update Router firmware,
Reseting the router.

Thanks for taking your time to read the above and thanks for any help that you can ... Read more

A:Ethernet/Wireless Disconnecting.

This is the listing of errors in your event log (from DDS that I asked you to run)

04/08/2010 13:03:31, Error: Service Control Manager [7031] - The Apple Mobile Device service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
04/08/2010 12:52:38, Error: Service Control Manager [7026] - The following boot-start or system-start driver(s) failed to load: StarOpen
04/08/2010 12:52:25, Error: atikmdag [52236] - CPLIB :: General - Invalid Parameter
04/08/2010 12:52:17, Error: Application Popup [1060] - \SystemRoot\SysWow64\Drivers\StarOpen.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
04/08/2010 11:58:33, Error: Service Control Manager [7001] - The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
04/08/2010 11:58:32, Error: Service Control Manager [7001] - The HomeGroup Provider service depends on the Function Discovery Provider Host service which failed to start because of the following error: The dependency service or group failed to start.
04/08/2010 11:58:32, Error: Microsoft-Windows-DistributedCOM [10005] - DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-5050... Read more

Read other 9 answers
RELEVANCY SCORE 53.6

I have tried another router port and still the problem is there...

I have used the same port on the router and it works on my laptop but it wont on my pc

when the i get the problem it cuts off for 3-5 secs then its back on and so on....

I have ran cmd ping google.co.uk and when it cuts off/disconnects it says
Reply from 173.194.41.183: bytes=32 time=55ms TTL=58
Reply from 173.194.41.183: bytes=32 time=32ms TTL=58
Reply from 173.194.41.183: bytes=32 time=31ms TTL=58
General failure.
General failure.
General failure.
Request timed out.
Reply from 173.194.41.183: bytes=32 time=32ms TTL=58
Reply from 173.194.41.183: bytes=32 time=30ms TTL=58
Reply from 173.194.41.183: bytes=32 time=30ms TTL=58
Reply from 173.194.41.183: bytes=32 time=31ms TTL=58

Any Help

A:Ethernet port keeps disconnecting please help

Driver update?

I would be more then happy to find you the update, if you give me some more information.

Read other 9 answers
RELEVANCY SCORE 53.6

Hello All, OK, so i have a very strange issue.  A customer has 16 M715q units (AMD A12's with Realtek NIC card & 128GB SSD) configured in a retail environment.   The customer had complained that occasionally things would be slow on various machines, but i was unable to predicably reproduce the issue with their POS software.  Today, I noticed during some work that my local RDP connection to one of our local servers was showing a "poor" connection and windows were dragging quite slowly.  This was quite strange as the systems are all connected 1Gbps to a Cisco switch and then 10Gbps via fibre backbone to our Cisco switch in the server rack which is then 10Gbps copper directly to the servers. I started to do some testing of file copys/transfers to our servers and noticed my sustained speed was anywhere between 8 - 35 MB/s (megabytes per second) which i considered inadequate considering our backbone speed.  I tried updating drivers, OS, firmware and was unable to get any better.  I thought there may have been a wiring or a switch issue, so i tested a different M710 unit (i5 with Intel NIC Card & 256 GB SSD this time) on a different network port/switch and was able to get 90 - 120 MB (megabytes) per second transfer speed.  I then moved it and saw 90 - 120 MB to our servers on the exact same network port as the first system.  At first i thought something was wrong as it went too fast, but different files c... Read more

Read other answers
RELEVANCY SCORE 53.6

I am trying to enable the ethernet driver on a ThinkCentre M72Z 3554-AQ8 that was not preloaded and did not even had a media disc with drivers, I downloaded them all from the webpage but the only one that does not work is this one according to the support site there are only 2 drivers both of them are Realtek but in the end the controller does not get installed and It can be used, I have the cable plugged and the signal light goes on on it, I have tried to get the driver from the update page of microsoft since I have windows 7 running on the pc, I have tried to get in the support page of intel and I have run the driver scan tool but it says that with the ethernet controller there is an error. Teh pc is brand New so I am really stressed out with this isue since the pc was requested by the CEO of the company, hope I can get some help in this forum.

A:ThinkCentre m72z ethernet controller can't be installed

Hi.. PLease share the hardware and vendor id from your machine.. Device manager> ethernet controler> properties>  Detail> select hardware id's from the dropdown box...copy the content of the box below and post in here...

Read other 4 answers
RELEVANCY SCORE 53.2

I've plugged my compaq Presario laptop (AMD athlon (tm) 64 3500+) into my netgear DGN2100 directly with an ethernet cable that i just brought, it works fine because i've tested it. but on my computer it just connects and disconnects every 2 seconds. on the back on my computer the lights flicker for a second then stop. however when i plug in my powerline ethernet adapter in it works completely fine. any ideas? changing settings etc?
 

A:Windows XP ethernet disconnecting every 2 seconds

it works fine because i've tested it.Click to expand...

how have you tested ?

------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------
------------------------------------------------------------------------
{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here
We would like to see the results from ipconfig /all post back the results here
-> Start
-> (XP - enter the following in the RUN box)
cmd /k ipconfig /all
-> (Vista or Windows 7 - ente... Read more

Read other 3 answers
RELEVANCY SCORE 53.2

* My internet keeps disconnecting and saying I need an Ethernet cable when im using a wireless adapter**

I recently bought a new PC (using Windows 8) and ever since I have started it up, it has been having issues. I am using a wireless adapter that connects to my modem which works just fine (the adapter is also new), but for some reason it keeps disconnecting me. It loses all its bars and comes up with the ' * 'symbol, then comes back with full bars showing its connected. It also says that I need to plug an ethernet cable onto the computer, or a network cable isnt plugged in properly.

I have tried a lot of things and nothing is working. I dont need updates whatsoever. If you could help me on this I would appreciate it because it has become very frustrating.

Thankyou

This is for a friend, they couldn't upload this because their connection is terrible and doesnt last long and is continually disconnecting
 

A:y internet keeps disconnecting and saying I need an Ethernet cable when im using a wi

lets see an xirrus screen shot

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file to the faulty PC and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://go.pardot.com/l/66982/2015-01-26/2361i
enter you details
Download this file "DOWNLOAD WI-FI INSPECTOR Vx.xx "
( the site now appears to allow webbased emails like gmail, hotmail, outlook and yahoo now )

There is also a xirrus gadget, But that does not have all the fuctionality "DOWNLOAD GADGET Vx.xx

Alternative links - Use the links below
http://www.softpedia.com/get/Network-Tools/Network-Monitoring/Xirrus-Wi-Fi-Inspector.shtml
Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, a... Read more

Read other 1 answers
RELEVANCY SCORE 53.2

I have been having problems lately with my ethernet and charger disconnecting and reconnecting. Sometimes my charger wont even reconnect unless i unplug it from the 2nd cord, plug it back in. This has been happening over the past week now.

A:Ethernet and Charger keep disconnecting and reconnecting

Does the power socket at the PC end feel loose?If yes, then it may be a bad socket or a socket that may have become loose over a period of time.Although this sort of this is rare, I would sugegst you to try and see if moving the power cable in its place makes any difference.If not then it could be a bad AC Adapter.Have you tried with another/spare AC adapter?

Read other 2 answers
RELEVANCY SCORE 52.8

I have this elderly machine M58 Desktop (ThinkCentre) - Type 6209 , yeah, but I use it only once a week managing my backups.
I have used it for years as a remote machine by WakeOnLAN and remote desktop.
Windows 10 has completely KILLED WakeOnLAN and I have spend too much time on getting it to work with that om board netadaptor (Intel(R) 82567LM-3 Gigabit Network Connection) ... I have tried different drivers old, "in the middle" and new but with no luck !
I now want to use another net adaptor but then the re is NO PCI Drivers !
 
Where can I find these PCI-drivers - the packs I've downloaded has NO PCI-drivers included !
 
Mod:  edited Subject line to add system type and expand problem description
 

A:ThinkCentre M58: Drivers for PCI-ports ?? Ethernet adapter WakeOnLAN Win 10

Sorry if you already looked.  But have you tried the driver download page already?
 
https://pcsupport.lenovo.com/dk/en/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/t...

Read other 5 answers
RELEVANCY SCORE 52.8

Hello, I'd like to add an additional ethernet card with 2-4 ports to a Lenovo ThinkCentre M58p 6137, but I'm not sure what will fit. I'm not the most computer knowledgeable, any advice would be appreciated! Thanks!

Read other answers
RELEVANCY SCORE 52.4

Hi everyone.

I have a problem with my internet connection. First, I've tried a PCI Wi-Fi card and a repeater and nothing change.

My computer have a problem with the internet connection. When I play games like Counter-Strike, I'm spiking and I have some rollback every 5s. Here's a picture of my internet connection in the task manager:

As you can see, I'm spiking alot. Sometimes, my PC disconnect from the router (even when it's wired).

What I tried:
- Recovery
- Flush DNS
- Renew IP
- Uninstall/Install network drivers and adapter
- Uninstall/Install general drivers

And... nothing worked, except one thing:
Fix network connection issues - Windows Help





Type netsh winsock reset and press Enter.Type netsh int ip reset and press Enter.Type ipconfig /release and press Enter.Type ipconfig /renew and press Enter.Type ipconfig /flushdns and press Enter.



It's working for like 30 minutes and then I'm spiking and lagging again. I suppose it's a DNS/IP problem. I need to do it again every time I want to play 30 minutes. Anyone have a idea?

Thanks!

PS: When I'm browsing on chrome, I don't see the spike effects, only when I play or skype.

A:Ethernet connection is spiking, disconnecting and reconnecting

Try, changing your DNS router to 8.8.8.8 and 8.8.4.4. These are the public google DNS routers. I had gaming issues and changing to these DNS fixed my problem, Internet problems with my ISP.

Read other 0 answers
RELEVANCY SCORE 52.4

Hello,  a year ago I bough Lenovo ThinkPad Yoga 20CD0038MC with Windows 8.1 (64-bit) and also OneLink Pro Dock.  Because Yoga has't own Ethernet adapter I connected cable to OneLink Pro Dock. Unfortunatelly it disconnect cable (and switch to WiFI) many times during each day. Everytime it takes only second and than cable was normally connected, but this destroyed every work which depends on stable connection (e.g. streamed webinars). Sometimes disconnection occurs once per day, sometimes 10x per day.  So I bough also original Lenovo USB 3.0 Ethernet adapter and connect it directly to USB port on Yoga - the same problem. So I decided that OneLink Pro Dock itself is fine and problem has to be in Yoga.  Approx. 2 months ago, disconnection time starts growing and sometimes I spend whole day only on WiFi. Two weeks ago, after last diconnection Ethernet don't get back and now I'm on WiFi only over two weeks.  I checked - Ethernet port on OneLink Pro Dock - both LEDs working and shows some traffic- Devices in Windows 8.1 - there is only wireless adapter (and bluetooth adapter), but in LENOVO support is not any new drivers for Ethernet, only one adding support of wake-on-lan. I installed it anyway. - when I turn off WiFi adapter, I'm without connection - LAN doesn't return- I found new drivers for OneLink Pro Dock, but when I attempt to install it, get error message that system doesn't find any OneLInk Dock :-/ (it shows... Read more

A:ThinkPad Yoga 20CD0038MC - Disconnecting Ethernet ...

Did you ever figure this out? I'm having similar problems right now. After updating the driver, the OneLink Pro's ethernet isn't even showing up in the device manager...

Read other 1 answers
RELEVANCY SCORE 52.4

I have recently bought this laptop and when I am using the ethernet connection it disconnects every few seconds, connects to wifi, and then and reconnects straight back onto wired connection. Seeing as I want to use the wired connection, as my wireless connection is terrible, I can't use my laptop for gaming and barely connect to websites stably. I have tried other cables and the issue persists, this has also happened to my friends HP Pavillion and the problem still persists. Thank you

Read other answers
RELEVANCY SCORE 52.4

My Thinkcentre M700 has ethernet and one of the USB ports active even when I attach power cord, without turning it off. I am positively sure I turned off Network Boot in BIOS, permanently disabled Computrace, and other stuff that could possibly cause this activity when off - however here we are. The machine doesn't have AMT. Updated BIOS to latest version yesterday, and ME Firmware to latest version today. I bought the machine second hand, at a very lucrative price and with bloody long warranty - and afraid it may be compromised. Even if not, I would like to understand what exactly is happening and how to prevent it. Please help!

Read other answers
RELEVANCY SCORE 52

We are beginning to roll out XPS 13 laptops into our environment and have run into this issue on multiple XPS 13s. We will have the USB-C to Ethernet adapter plugged in and connected to ethernet, and after a couple of minutes it will lose connection. Once it loses connection, it constantly connects and disconnects every 5-10 seconds. I have looked through this forum for a while and have not found anyone else with this issue, however we are having the same issue on multiple laptops. They are running Windows 7 with a fresh image.

A:XPS 13 9350 USB-C to Ethernet Adapter Constantly Disconnecting and Reconnecting

I'm seeing the same issue on Precision 5510s.  Don't have an answer myself.  I have disabled power management option that allows the system to shut off the device to save power, which didn't help.

Read other 1 answers
RELEVANCY SCORE 52

We got a new Lenovo T590 and when i went to Image it, it went through the normal process and everything was fine until it boots into windows 10 for the first time. It disconnects from ethernet even though its plugged in, and the trackpad doesnt work. It seems as though the driver for Ethernet adapter is being uninstalled when it first boots into windows because its missing completely from the network connections screen in the control panel. Any ideas on what could be causing this? Thanks

Read other answers
RELEVANCY SCORE 50.8

Hi,
 
We've recently installed Server 2012 on a new Lenovo ThinkCentre M700 and unfortunately it's unable to pick up the network adapter. We tried the Windows 8.1 versions of the network drivers from the Lenovo site (as they share the same kernel) but they didn't work.
 
Have also tried downloading the server 2012 versions of the specific drivers direct from Intel's website.
 
Has anyone had any luck finding a server 2012 network driver for this machine? 
 
Thanks













Solved!

Go to Solution.

A:ThinkCentre M700: Ethernet Network Driver - Server 2012 & 2019 - Intel I219-LM

m700 wrote:
Have also tried downloading the server 2012 versions of the specific drivers direct from Intel's website.

What is the issue with the drivers downloaded direct from Intel?  
 

Read other 5 answers
RELEVANCY SCORE 48.8

I would love some suggestions for a GPU THANK YOU SO MUCH IF U CAN

Read other answers
RELEVANCY SCORE 48

I have ThinkCentre Desktop model M710t. I wonder why the color is black(I like black color and the others). The color could be diverse, couldn't it? Can anyone answer my question?

Read other answers
RELEVANCY SCORE 48

my Ibm Thinkcentre Lenovo Desktop won't boot up, i also get a message that says no operating system found, help what do i do?
Kimmy

A:Ibm Thinkcentre Lenovo Desktop

Hi and welcome to TSF do you have the win xp install disc

Read other 2 answers
RELEVANCY SCORE 48

Estimado tengo una Think Center Mt-M 9196-A17 pero no puedo entra al bios alguien me puede ayudar como entra al bios ya use el "F1" y "F2" y el Boton de suprimier tambien no si alguien me pueda decir donde encontra la ficha tecnica de esta Pc para ver cuanto memoria ram admite les agradesco de antemano toda la ayuda. Dear I have a Think Center Mt-M 9196-A17 but I can not enter the bios someone can help me as I enter the bios and use the "F1" and "F2" and the Delete button also not if someone can tell me where to find the technical data sheet of this PC to see how much ram memory I admit I thank you in advance for all the help. 

Read other answers
RELEVANCY SCORE 47.6

Hello, I have a M900 and an Samsung NVMe SSD 960 EVO M.2. On the Aminboard is a slot for a M.2 device. This is not the right one for the Samsung SSD. So I have bought an adapter (aqua computer - kyroM.2 PCIe 3.0 x4 NGFF PCIe SSD, M-Key mit Passivkühler). After installing (PCIeSlot 4x) and booting the SSD is not recognized in the BIOS and in Windows (10 Prof. 64Bit).Where is the problem? Is the adapter wrong?

A:ThinkCentre M900 Desktop SamsungNVMe SSD 960 EVO M.2

That card you ordered definitely is not right.
 
I think this StarTech PCIe card is more what you need.
 

Supports PCIe M.2 SSDs
The adapter supports PCIe 3.0 x4 NVMe (M Key) and PCIe-AHCI M.2 SSDs including 2242, 2260, 2280, and 22110 drives. The expansion slot adapter supports the most common drive sizes including 110 mm, 80 mm, 60 mm and 42 mm.
 
 
Here's another card that is also acceptable.
 

Read other 3 answers
RELEVANCY SCORE 47.6

Hi, my M700 Desktop ThinkCentre does not boot I was doing an Lenovo Firmware update via their software  and it went into  sleep mode and never came out I have tried to unplug in the green power light comes but I don't get anything on my monitor  Thanks 

Read other answers
RELEVANCY SCORE 47.6

Hi Folks,   Keyboard not working.  Only thing operating is letter R and when I type that it is surrounded by an @ sign.  I have connected a different keyboard and it's working ok. Thanks

Read other answers
RELEVANCY SCORE 47.6

I can't find the model number, but hoping someone might have solution: I purchased Lenovo ThinkCentre desktop PC around a year ago but didn't connect it til my previous PC was hacked recently.  The problem:  the internal speakers worked fine for the first few days, but now there is no sound.   My Windows control panel info says drivers are all up to date, and the sound comes through when I attach external speakers, so I'm wondering why the built-in speakers suddenly quit.   Might anyone here know what the problem could be?  

Read other answers
RELEVANCY SCORE 47.6

Hello, I have PC M71e Desktop and when I turn off computer in Windows, windows go off, LCD is black, but the computer is still on and the fan is rolling. I have Win10 ,but on Win7 is the same. I mean the problem is with Intel managment interface. If I install the driver, I still see error with Intel managment interface (error 10). I try a lot of drivers. But all time the same...  Here is ID of hardware: PCI\VEN_8086&DEV_1C3A&SUBSYS_307C17AA&REV_04PCI\VEN_8086&DEV_1C3A&SUBSYS_307C17AAPCI\VEN_8086&DEV_1C3A&CC_078000PCI\VEN_8086&DEV_1C3A&CC_0780 Any ideas?  


























Error.png ?32 KB

Read other answers
RELEVANCY SCORE 47.6

I can't find the model number, but hoping someone might have solution: I purchased Lenovo ThinkCentre desktop PC around a year ago but didn't connect it til my previous PC was hacked recently.  The problem:  the internal speakers worked fine for the first few days, but now there is no sound.   My Windows control panel info says drivers are all up to date, and the sound comes through when I attach external speakers, so I'm wondering why the built-in speakers suddenly quit.   Might anyone here know what the problem could be?  

Read other answers
RELEVANCY SCORE 47.6

performed a clear CMOS after thinkcentre was posting a blue screen of death. blue screen of death info said to find available BIOS update, however, unable to install BIOS update in safemode. After the clear CMOS, now the BIOS is beeping, three short beeps, then 1 long beep with different sound. any help would be much appreciated. BTW, was running 64 bit windows 7

Read other answers