Over 1 million tech questions and answers.

Thunderbolt Dock 3 Firmware Update doesn't work

Q: Thunderbolt Dock 3 Firmware Update doesn't work

Hey all! I can't seem to get my firmware to update....I just get this: Has anyone seen this and have any advice? I've consulted Google and the forums here and can't seem to get any leads. I'm running a T480 with the latest updates per the support site and the System Update 5 tool. Thanks in advance!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Thunderbolt Dock 3 Firmware Update doesn't work

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 112.8

Hello,  My Thunderbolt dock stopped working with the error message "Not all Thunderbolt ports are functioning properly, please contact PC manufacturer for a firmware update".  So I went to "Display and Videos Graphics" and tried to run the "Thunderbolt firmware update tool for Windows tool"  and get the error message below. Any idea how this can be fixed?  Thank you! 

Read other answers
RELEVANCY SCORE 102

Hi, i have a T470 that connects to a UCB C Lenvo thunderbolt dock, occasinly it requires the firmware to be updated (i done this last month) however it is erroring again saying i need to conncact my pc manufacturer for new firmware, i have just checked and there is no new firmware on the lneovo website, i installed all the latested packages that were there, does nayone know where i can get the new firmware and if there is any workaround? The dock is not showing as connected in the dock software window, however the dock light goes from yellow to white when i polug it into the laptop, so it does see the connection they just cant talk to each other. Thanks 

Read other answers
RELEVANCY SCORE 98.4

I used the Lenovo System Update (v5.07.0074) and was prompted to download and install (was listed as Critical Update) the Firmware to my Dock.  As always, I closed all applications and sat as the Firmware downloaded. I got the expected prompt to ensure I was plugged in. I then watched as the upgraded prompted me to install. Installation completed and everything appeared to be fine.  I powered down the thinkpad and disconnected. Worked from the living room, then went back to the dock. Connected, and noticed that before I connected the White light on the power button was illuminated. Shrugged, and pushed the power button. Nothing. I un-plugged the Dock, got a cup of coffee, returned and plugged it back in. Nothing. I then noticed that none of the pass-through power was working on the dock.  So, I unplugged it again.  Unplugged everything connected to it, and held the power button down for 15 seconds in an effort. All of this at the recommendation of Lenovo Support. Who, by the way, was very nice and well spoken. Nothing we did worked. I happened to have another Thunderbolt 3 cable in my bag, and no change. I powered up my new X1 Yoga, and connected the cable. No power. This wasn't passing power at all. I confirmed the Intel Thunderbolt app was running, and confirmed that Windows was not even detecting the Dock.  Lenovo is sending me a replacement. I had this one all of a week. Did I miss any other steps while I wait for it to be repl... Read more

Read other answers
RELEVANCY SCORE 94.8

Hello, I've got a X390 Yoga and a ThinkPad Thunderbolt 3 Docking Station. The Problem is that the Docking Station isn't working. The on/off switch works, but my Monitor/Mouse/Keyboard/LAN/Printer that are connected to the Docking Station don't work at all and can't be detected. I already updated all drivers with the Lenovo Vantage App. I also tried updating the Firmware of the Docking Station but the Installer doesn't find the dock. Thank you for your Help.

Read other answers
RELEVANCY SCORE 93.6

I have a 6th Gen X1.  One of the thunderbolt ports no longer works with the monitors on the docking station - the keyboard and mouse do work.  The monitors do work when plugged into the other thunderbolt port.  I am worried that one will stop working too.   I do not know of any damage or issues and I ensured the latest drivers were installed.   Any ideas on how to troubleshoot? 

Read other answers
RELEVANCY SCORE 85.2

I am using a T480 with the TB3 dock and 2 external monitors.My problem is my screens go black for a couple of seconds every x amount of time. I've updatad all drivers found under the Display and Video graphics section Drivers T480I remember when updating to Intel Thunderbolt Software for Windows 10 (64-bit) - ThinkPad T480, T480s, X1 Carbon Gen 6 - 1.41.565.0I received the following screen:(I did get 2 Thunderbolt SW apps in my start menu and uninstalled the one which was visible via add/remove programs) These updates did not resolve my monitor issue.I later on noticed there is a new TB3 Dock FWWhen I wanted to make the update I got the message the TB SW had to be above 17.4.77.400. (the version insalled and active was 1.41.565.0) I reinstalled TB SW 17.4.78.500 and performed the TB3 dock FW upgrade. Now I am in the situation I do not have a Thunderbolt SW application to allow/select TB devices to connect.V1.41.565.0 seems to be a new DCH driver. reverting back to the legacy driver 17.4.78.500 is not somethig I should have done.It seems the DCH driver came with it's own Thunderbolt SW application, which is no longer available. Is there a procedure to completly reinstall the DCH driver including the Thunderbold SW or revert back to the legacy driver with Thunderbold SW (which now states the application is not in use anymore) Thanks!

Read other answers
RELEVANCY SCORE 83.2

I just got my X1 Extreme yesterday. I updated the BIOS to 1.15 and also updated other drivers. The one pending thing is the Thunderbolt firmware update utility. The first pop-up says "do not connect any Thunderbolt device", but then a second pop-up right before the firmware update says "connect at least one Thunderbolt device. I cancelled the update for now due to the conflicting pop-up messages. Note - I do not have any Thunderbolt devices connected to my X1E laptop. Can I upgrade Thunderbolt firmware safely with no Thunderbolt devices connected, or?

Read other answers
RELEVANCY SCORE 83.2

Hello,the thunderbolt on my X380 Yoga completely stopped working. As I try to connect a P27h for instance, the laptop charges but does not recognize the monitor or USB Hub.I installed every update available on system update and tried to update the Thunderbolt Software and Firmware. The software installed fine but upon updating the firmware the following promt appears:    When I check the version inside the Thunderbold software, this is what shows up:    I am running Windows 10 Home 1803. Any idea why this is not working? Is my thunderbolt controller not working properly?Thanks

A:Thunderbolt not working / Unable to update thunderbolt firmware

There is an issue with the update for the tunderbolt firmware when updating through the system update utility. This is a known issue that the Engineering department has been working on. The only known resolution to this issue so far has been to replace the system board. Im sorry for the inconvenience this is causing. If the device is still under warranty i would speak with the support center to have a tech install a new board.

Read other 1 answers
RELEVANCY SCORE 81.6

X1 Carbon 6th Generation used with 40AF ThinkPad Hybrid USB-C with USB-A Dock and Logitech wireless keyboard/mouse combo. Two Dell mointors are connected to the dock.  About 6 months ago, the computer stopped waking up after going to sleep while connected to the dock using the USB-C cable.  The screens continue to display the proper images. However, there is no mouse pointer present, and the PIN code box does not appear.  Opening the PC and using the touch pad does not resolve this issue.  When the USB-C cable is disconnected, the PIN box appears on the laptop screen.  Reconnecting the USB-C cable seems to fix the problem.   I have been using Lennovo Vantage to maintain drivers.  Manually installing the Thunderbolt Software and Firmware did not resolve the issue.  Setting the BIOS THunderbolt settings to enable did not resolve the issue.   Any ideas? 

Read other answers
RELEVANCY SCORE 78.8

I have a thunderbolt 3 dock that is useless charging this yoga 370 up. Plugged into the dock it either loses charge or takes upto 6 hrs to reach full charge. Plugged directly into the yoga; charge time = 1hr. Any ideas how to fix this? Thanks













Solved!

Go to Solution.

A:Thunderbolt 3 dock doesn't charge

Firmware update appears to have fixed it, or pot luck. 

Read other 1 answers
RELEVANCY SCORE 76.4

I have a TP X1 Extreme Gen 2 attached to Thunderbolt 3 Dock (Gen 2) and 2 ThinkVision P24h monitors. System is set to disactivate monitors when not in use for 30 mins. However, when I return to laptop only the right monitor wakes whereas the left one (set as primary display) will not. The only way to wake it is to unplug the monitor from dock and plug in again or unplug laptop from dock and then reconnect. Left monitor is connected with DisplayPort cable and right monitor with Type C (it would not work with DP cable).Furthermore, both monitors frequently won't turn on with initial system boot and I am forced to disconnect and reconnect dock cable to get them to work.All drivers and BIOS are up to date.Any suggestions/solutions?

A:Thunderbolt 3 Dock (Gen 2). External monitor doesn't wake after suspension

I had trouble with a different Thunderbolt dock, that went away after I updated the dock firmware. Maybe there is an update for your dock? You will have to install those manually.

Read other 1 answers
RELEVANCY SCORE 76.4

For my X1 Carbon 5th Gen I got myself a Thunderbolt 3 Dock (Gen 1) - (40AC). But right now the dock doesn't work as expected.I have connected a 1440p-Dell monitor via DisplayPort. Also I conntected a 1080p-Panasonic-TV via HDMI. The manual of the dock suggested to use a certain DisplayPort-Connector, which I did.I'd like to switch on my ThinkPad via the power button on the dock and then wake up my Dell monitor from sleep. Right now the Dell is set as primary display. If needed I'd like to switch on the TV as a secondary display. The ThinkPad should remain closed and only the external displays should be used. In the BIOS of the ThinkPad I alread configured, the an external display should be used prior to the internal one.Right now the following happens: I switch on the ThinkPad via the button on the dock. The Dell monitor doesn't wake up. Only when I switch on the TV (Panasonic 1080p via HDMI) also the Dell monitor wakes up and shows the content. I'm rather lost how to solve this behaviour. I already checked the BIOS version of my ThinkPad and updated it - nothing changed  Has anyone any idea?

Read other answers
RELEVANCY SCORE 76

I have ethernet issues with my Thunderbolt 3 dock 150W and my Zbook 15G3, running on windows 7 / 64 bit. I had many issues before with the system after a BIOS update (slow performance, usb poorts that would't work, windows that would not download updates, ect.). I read many postst with similar problems. The hardware was exchanged by HP but the problems remained and I was left alone to install the BIOS and updates. Thank you HP!After a long period of fiddeling I got everything back to work. Exept for the ethernet connection on the thunderbolt dock. Somehow the drivers are not inatlled / available. The ethernet connection / WLAN on the laptop work fine, but not on the dock. I don't know where to find the right drivers / how to install them. Who can help? 

A:Ethernet on thunderbolt dock won't work

I have the Zbook 15 G3 Mobile Workstation using the Zbook Thunderbolt 3 dock: http://www8.hp.com/us/en/workstations/zbook-dock.html I am sending this on the Zbook connected to the dock using its gigabit ethernet port. HP Support Assistant provided all the drivers needed for the dock. Here is the screenshot of my device manager:    What does your device manager look like under network devices? The Intel ethernet is the built in and the Broadcom NetXtreme is the ethernet in the dock. HP has drivers for both on the support page for Windows 10 64 bit under the Zbook G3 Home page.  I did have a bit of a struggle initially getting the dock to work but I went into the BIOS and disabled all Thunderbolt security settings. If you need any more help post back. If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers
RELEVANCY SCORE 76

I just received my HP ZBook Studio and Thunderbolt Dock. I updated all drivers and BIOS. However, there is no internet connection through ethernet when I connect RJ45 to the dock. Am I missing something? Is it possible to have hardware related problem? Thanks,

A:Re: Ethernet on thunderbolt dock won't work

I am posting this through a Zbook G3 connected to a Thunderbolt dock with ethernet connected to the dock ethernet. Did you specifically install the package of dock drivers? Are you seeing crippled devices in device manager?

Read other 1 answers
RELEVANCY SCORE 76

Hello, I am trying to use a Thunderbolt 3 to Thunderbolt 2 adapter (StarTech brand) to connect my P50 to a Resident Audio T4 Thunderbolt audio interface. The device is briefly detected and then disappears. I have been doing some research to resolve this issue and a few users have said that updating thier Thunderbolt NVM to 18 add compatibility with the adapter.  Would it be possible to get an upgrade from the current NVM16 to NVM18? Current P50 firmware (NVM16) link here:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50... I have already attempted to install the NVM18 firmware straight from Intel but it looks like the firmware is OEM specific. Thanks!

Read other answers
RELEVANCY SCORE 76

I note a new P51 (models 20HH, 20HJ) Thunderbolt Firmware update has just been posted on the support drivers page (24 Jul 2018) which is great news, but it's release note refers to Thunderbolt driver / software version 17.3.74.400. The Thunderbolt driver software currently available on the P51 20HH, 20HJ support drivers page is version 17.1.64.250, which is quite old. Please would you also put the latest Thunderbolt Software on this support drivers page. BTW: The P51 (models 20MM, 20MN) support drivers page does has the latest Thunderbolt Software (17.3.74.400), so I assume this could be installed on a P51 (models 20HH, 20HJ), as all models use the same Thunderbolt controller - ID 15D9 (Intel JHL6340).

Read other answers
RELEVANCY SCORE 75.6

Lenovo Vantage updated the T480s BIOS on 8/9. I immediately started getting a Thunderbolt error when starting Windows 10 64, which says to update the Thunderbolt firmware. I downloaded the current firmware from Lenovo (n22th06w) but I get the following error when trying to update: 0x20D SDK_INVALID_OPERATION_IN_SAFE_MODE What's the solution, Lenovo? Thanks.  

Read other answers
RELEVANCY SCORE 75.2

I have narrowed the issue down to a software issue.  I have tried resetting the dock, the computer, updated to the newest driver as well as even replacing the dock itself.  I had an extra and thought the dock ports might just be dead but the new dock doesnt work either.  I have also tried both ports on the PC in order to rule that out as well.  Does anyone have suggestions?  Thank you in advance!!

Read other answers
RELEVANCY SCORE 75.2

I cannot get my T570 to update the Thunderbolt Firmware.  I have looked and followed all previous posts and still get error messages.  

Read other answers
RELEVANCY SCORE 75.2

Hi.  I received the following when opening lenovo Vantage; A Thunderbolt controller has experienced a problem and cannot connect to devices or other computers until new firmware is installed.  Other Thuderbolt ports may be functioning normally.  Please contact PC manufacturer for a firmware update to restore full Thunderbolt functionality. What can I do to overcome this?BRCappi

A:T470 Thunderbolt firmware update

Have you tried installing the latest firmware from here?  https://pcsupport.lenovo.com/us/en/products/LAPTOPS-AND-NETBOOKS/THINKPAD-T-SERIES-LAPTOPS/THINKPAD-...
 
What happens?

Read other 1 answers
RELEVANCY SCORE 75.2

So, brand new WD15 connected via USB-C to an Inspirion 7000 7278 laptop under Linux. No complaints with the display, ethernet or USB-ness. I did notice, however, that there is a newer firmware available. No biggie, I boot into windows and attempt to flash the update. And then I get the 'no thunderbolt dock found cannot flash...'
So, just how are we supposed to flash firmware on the dock if we don't have a thunderbolt connection?

John

Read other answers
RELEVANCY SCORE 75.2

For some reason the firmware for thunderbolt won't update on my p70. I've tried installing from a command prompt and using the installer. Either way it seems to work but the firmware version doesn't change. I have the hdmi cable connected to a monitor and have the thunderbolt software running. I've rebooted and tried again. I've booted into safe mode then rebooted and tried again. I've uninstalled the thunderbolt controller and tried again all to no avail. Ideas anyone? Thanks in advance.

A:P70 HDMI Thunderbolt Firmware won't update

Badhabit_wb,
 
I'm sorry to hear the Thunderbolt firmware installation was unsuccessful.
 
Lenovo is in the process of publishing a Service TIP that includes step-by-step instructions on how to check the Thunderbolt firmware version as well as a comprehensive guide to installing it.
 
I will post the link here once it goes live in the next day or two.
 
Thank you,

Read other 3 answers
RELEVANCY SCORE 74.4

While trying to update the thunderbolt firmware update utility, I get the attached error message.  It happens every time.  Please tell me how to fix this. Dav Vandenbroucke

Read other answers
RELEVANCY SCORE 74.4

Hello, I have purchased this week the Thunderbolt 3 Workstation dock. It work well until today. Yesterday (Feb 1st) evening I ran the Lenovo Vantage update which updated a bunch of things. Interesting ones: Thunderbolt 3 Dock Firmware Utility and BIOS update.Everything seem to work fine. This morning, first issue: after docking the PC, the Ethernet controller from the Thunderbolt dock didn't seem active. Other attached devices (monitors, mouse) were OK. My reflex: "restart" the dock, i.e. disconnect/reconnect the power cables. And then the dock ceased to work. It looks like if it's "bricked". The power led is on, but pushing the button (or long press) doesn't do anything. Relating to the updates from yesterday, I'd say that it's somehow related to them. And/or maybe an issue with the Thunderbolt software/drivers on PC? I tryed to uninstall/reinstall the Thunderbolt software on the PC. I find curious that:immediately after install, "Attached Thunderbolt Devices" shows "Port 1", "Port 2". By install I mean I open Lenovo Vantage and do a "Check for updates". It doesn't tell me that it had installed something, but it triggers the download and install in the background.Also I see in Device Manager: Device Manager/System/Thunderbolt Controllerafter restart, the list is empty, and in Device Manager there is no more "Thunderbold Controller"  Have you got any hints? Thanks in advance,Cristian.

Read other answers
RELEVANCY SCORE 74.4

Hi all Been using the thunderbolt for few weeks, struggle to make it to work with multiple restarts and shutdown before it start to disapply on my monitor. Today non of that worked so I tried to uninstall the "Thunderbolt Software" and update the "Thunderbolt FW" but it's not working with multiple errors as below: 1- TB - SW version 17.4.80.41 installed/ NVM details are not showing. 2- TB - FW update error "No Active Thunderbolt(TM) Controller Found in the system 3- Detect 1810.exe ends with errorCapturing Current NVM Version.....Capturing Current NVM Version failed!Error: 0x20B SDK_NO_CONTROLLER - 4- TB is enabled in bios 5- Thunderbolt Controller is not showing under Manage devices, though show hidden is selected 6- Tried to reset while battery and charger off using the hole behind the laptop. Didn't work 7- Lenovo update showing no updates available, also windows and intel. Now the TB port is completely inactive.  Apprecieate any guidnce 

Read other answers
RELEVANCY SCORE 74.4

Does anyone have problems during the installation of Tunderbolt 3 firmware update? Mine just got an error that says "This method is not implemented in any class". The update to be installed is "Thunderbolt Firmware Update Utility for Windows 10 (64-bit), 8.1 (64-bit), 7 (32-bit, 64-bit) - ThinkPad P51s".

Read other answers
RELEVANCY SCORE 74.4

I installed firmware update N25TF08W via the utility. After doing so only one of my thunderbolt ports will actually charge the computer. The other recognizes that the power supply is plugged in but fails to start charging. I don't know the underlying issue yet, but a PSA...

Read other answers
RELEVANCY SCORE 74.4

I have a T470S type 20HF running windows 10 (version 1703) that suddenly the Intel Thunderbolt Driver was updated and gives me the error "A Thunderbolt controller has experienced a problem and cannot connect to devices or other computers until new firmware is installed." The computer is connected through a usb-c cable to a dockin station which has two monitors connected through display port cables. I tried uninstalling the Intel Tunderbolt Software (ver. 17.4.78.500) and reinstalling it.I tried installing thinkpad thunderbolt 3 dock and usc-c dock driver v10017.I tried to install new firmware with the file N1WTH07W but it says "cannot find correct bin file" I still get the same error and cannot use the monitors connected to the docking station. Please help.

Read other answers
RELEVANCY SCORE 74.4

Hi, Lenovo recently released a firmware update in the Lenovo Vantage app for the thunderbolt port on my 5th Gen X1 but the update seems to fail. Also tried the update by downloading it direct from Lenovo support website but getting the same error.  Any suggestions? Cheers 





ThinkPad X220i7-2620MCorsair Neutron GTX SSD 480gb8gb Crucial RAMIPS 12.5 3x3 displayIntel Ultimate N6300 wifi9 cell batterybluetoothFingerprint readerWin 7 Pro 64 bit

Read other answers
RELEVANCY SCORE 74.4

I've read numerous other posts in this thread on ways to remedy the situation, but none are working for this system.The computer is running Windows 10 64bit 1903Thunderbolt Controller 15BFThe computer has the latest version of the Thunderbolt Software Installed (17.4.78.500)The firmware Version is currently the version previous to the last. 17 01 No matter what method I have tried, all fail.  I tried using Gigabyte updater and select the TBT.bin from Lenovo.  Doesn't work.Tried the administrator silent install, doesnt work.Uninstalling the device, uninstalling the software and reinstalling the software doesn't work. I'm just stuck and don't know what to do.  We have somewhere between 30-50 users reporting error messages from the Thunderbolt software but cannot get the firmware to update!  Hello Lenovo!

Read other answers
RELEVANCY SCORE 74.4

I have a T470 20HD running Windows 10 Pro. Both the operating system and all Lenovo updates have been applied. Attached to thos is a Plugable-brand USB3 dual HDMI docking station that's been driving a pair of Dell SE2417HG(HDMI2) screens. Or did, until I did the Integrated Firmware of Thunderbolt Function 1.0.12.0-N1QTF16W update, at which point it now only drives a single screen. Windows sees both displays but now can't use one. I've tested both displays and they work fine otherwise, and if I unplug one display the dock will "fail over" to the other display without an issue.Is there a way to roll back this firmware update, or am I basically out of luck? 

Read other answers
RELEVANCY SCORE 74.4

On my P52, I was prompted to install an update, Thunderbolt Firmware Utility - V1.0.12-N2CHF10W. However, it did not install, and I thought I saw something on here about people having issues with that. What's going on? Should I bother trying to install the update? It tried to have me connect a TB device, and I was scared I'd brick something.

Read other answers
RELEVANCY SCORE 74.4

The Thunderbolt firmware update to correct HDMI issues for the P70 is now available in the Support section:
 
http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P70...
 
 
 
 

Read other answers
RELEVANCY SCORE 74.4

Today, I noticed that my USB-C docking station was no longer passing video from my T470 to my monitor. The monitor's HDMI cable is plugged into a docking station that is connected to my T470 via USB-C. It's been working fine for more than a year. All other connectivity via the docking station works (e.g., keyboard, mouse, ethernet, power). The docking station, including video, works just fine with another (non-Lenovo) PC. My first thought was to check Lenovo Vantage or the support website for Thunderbolt software and/or firmware updates. The most recent software is several months old and already installed on my machine. I can see that there's a relatively recent firmware update on the website, but it's specifically for Windows 10 1809 or older. I am running 1903. When trying to install that firmware update, I receive an error message (can't find suitable bin file). Vantage does not find any updates for me to install. I did see this post, which mentions HDMI output not working as a symptom (among others). However, it recommends the Thunderbolt software that has been installed for several months as well as the firmware that I cannot install. I have two questions:Is anyone else having problems with HDMI output via their T470 USB-C/Thunderbolt port?Is there any news on when there will be a new T470 Thunderbolt firmware update for Windows 10 versions newer than 1809? 

Read other answers
RELEVANCY SCORE 74.4

Hello I hope someone might be able to help me. I have been trying to run the Thunderbolt Firmware Update Utility - 10 [64] - V.1.0.12.0-N23TF13W.  When I run the update I get the following error from the Thunderbolt firmware update utility: "Error: 0x224 SDK_NATIVE_MODE_MISMATCH Native/BIOS-Assisted mode mismatch between the controller and the image file". Below is the about from the Thunderbolt Software.   Thanks in advance for your guy's help!  

Read other answers
RELEVANCY SCORE 73.6

Why no Thunderbolt firmware for 720S-141KB ...???https://pcsupport.lenovo.com/us/en/downloads/DS500874 I see it here for X1...https://pcsupport.lenovo.com/us/en/downloads/DS120382 Here for ThinkPad X380 Yoga...https://pcsupport.lenovo.com/us/en/downloads/DS502887 Here for X25...https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-... What's up?

Read other answers
RELEVANCY SCORE 73.6

Having issues with updating Thunderbolt firmware.  Now that the new version of the FW update tool is out, I've verified that I'm on the latest driver version, but when I run the detect tool, I receive the following error: Capturing Current NVM Version.....Capturing Current NVM Version failed!Error: 0x20B SDK_NO_CONTROLLER - If I run the update tool itself, I get a popup stating that no controller driver is found and I need to install the software and connect a Thunderbolt 3 device, then click OK to proceed or click Cancel to cancel the firmware installation.  The problem is that the only Thunderbolt 3 device I have is my docking station, which doesn't work, because of the "botched" firmware update tool that was released in early September.  Seems I'm in a catch-22 with no way out.

Read other answers
RELEVANCY SCORE 73.6

I was attempting to download the latest Thunderbolt 3 NVM firmware update for the ThinkPad P50 as a result of  following the guide here -> https://support.lenovo.com/us/en/solutions/SF16-T0051    However, when attempting to download the firmware update itself via the link provided within the text -> http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P50... It results in a page not found error. I could have sworn this update was there a short time ago and I can see from other forum posts that it worked in the past. Is this just a glitch or is there a newer TB3 NVM update available? Thanks in advance for any help or guidance! 

Read other answers
RELEVANCY SCORE 73.2

Hi there, my Helix laptop (purchased a few years ago) is giving me the "Keyboard Dock Fan Error" at startup. I am then unable to use the keyboard and mouse pad. I previously had this same error a couple of years ago and had solved it using the Firmware update.Now I tried:- BIOS update. Done updated to the latest BIOS version.- Tried doing again the firmware update (although I had done it a couple of years ago) but now I have Windows 10 and the firmware update executable on the Lenovo site says it is for Windows 8 or below. I tried it anyway but it gave an error saying: "This tool and EC firmware mismatch, or communication error is happened.".  Your help is much appreciated.- Najib

Read other answers
RELEVANCY SCORE 72.8

Hello, i just started with my new Yoga x380 installed all drivers and connected the dokckingstation via the thunderbolt software.Every morning, i come to my place, connecting my notebook and power them on with the button on the dockingstation. My bitlocker appiers und im not able to type my password in. If i disconnect my notebook and reconnect them, power on again via dockingstation my keyboard an mouse work. How can i get this work the first time? Its verky akward to connect them two or three times... Hope anyone can help me

Read other answers
RELEVANCY SCORE 72.8

When turning on the Thunderbolt 3 workstation dock using a P52 the USB and audio ports do not work. Means that a USB connected keyboard or mouse is not usable. I can resolve the issue by unplug&plug-in the 65W power supply cable. Why are keyboard/mouse/headphones not instantly working when switching on the dock? Is there a special setting necessary? Thx!

Read other answers
RELEVANCY SCORE 72.8

I would like to update the thunderbolt firmware on my Lenovo Thinkpad T580. However the Firmware Update tool tels me "Firmware file (*.bin) not found in folder". I ran the update through Vantage and though the pcsupport download link.I follow the steps in the readme, admin account and all that, but with the same result.When I click next and ignore the file not found warning I get the following error:  Error: 0x207 SDK_FILE_NOT_FOUND File does not exist.

A:Thunderbolt Firmware update on T580 not working - SDK FILE NOT FOUND

Please do these steps:
1.  open a command prompt as administrator
2.  cd \fw\win\thunderbolt
3.  detect.exe
4.  post screenshot of the output here.  It should look something like this.
 

Read other 1 answers
RELEVANCY SCORE 72.8

I have an X1 Carbon 6th Gen laptop (Type 20KH). The firmware update mentioned in the following link fails to install:Critical-Intel-Thunderbolt-Software-and-Firmware-Updates/m-p/4519769 When I try to update using Lenovo Vantage, it fails with error code 0x207.When I try to install the firmware package manually, it reports error 0x430000 4390912 and pops a dialog box saying it couldn't find a suitable bin file. Here are the files mentioned in the update notice that I used for the manual attempt. Note that the driver package install went fine. The problem was with the firmware package install. Products NameDriver PackageFirmware PackageX1 C ? 6thN22TA12WN23TH02W Known issue? Solution?

Read other answers