Over 1 million tech questions and answers.

Configuration address for an Arris TM502G modem

Q: Configuration address for an Arris TM502G modem

I need to find the configuration address for an Arris modem. The instructions that I have sya that it should be at the bottem of the modem, listed as an "http." address followed by a series of numbers, but there is no "http" info on th modem. Is there a different way for me to find that number?

RELEVANCY SCORE 200
Preferred Solution: Configuration address for an Arris TM502G modem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Configuration address for an Arris TM502G modem

http://www.ehow.co.uk/how_6067836_troubleshoot-arris-modem-502g.html

In a browser try the following 192.168.0.1 ; 192.168.1.1 ; 192.168.100.1 ; 192.168.1.100.
so will be http://192.168.0.1 or .2 or 1.1 just keep trying

http://www.arrisi.com/support/guides/500_series.asp

Read other 2 answers
RELEVANCY SCORE 88.4

I have a Arris TG862 Modem And Router. With Time Warner Cable Internet. Saturday When I Got Home The Wireless Said "Unidentified Network No Internet Access" I ran trouble shooter and it said windows doesn't have a valid IP configuration. I called Time Warner 4 times and told each person on the phone this and all they did was reset the modem over and over which isn't helping me. I currently using a friends wireless.. Can someone help me with this problem?

A:Arris Modem/Routeer No Valid Ip Configuration?

How did TWC have you reset the modem? Did they just have you unplug your modem from the AC outlet? Is this modem a combo modem router or do you have a separate router connected to the modem? To technically reset the router and or modem you need to push in the reset button on the back of the device. Use a paper clip and push in an hold down for 15 to 30 seconds then release.

Read other 9 answers
RELEVANCY SCORE 69.2

I have a Netgear DGN2200 (N300 Wireless ASDL + Modem Router) that I got from Goodwill. There is no WAN port behind the router... only LAN ports I see. How do I setup my Arris Cable modem to this Netgear Modem Router? I need help PLEASE!

Link to Netgear DGN2200: http://www.netgear.com/home/products/wirelessrouters/work-and-play/DGN2200.aspx

Link to Arris Cable Modem (PDF): http://www.arrisi.com/product_catalog/_docs/_specsheet/060510_Touchstone_Telephony_Modem_TM502G.pdf
 

A:Netgear Modem Router & Arris Cable Modem

if its ADSL you cannot use it as a router on a cable modem, its designed to connect to the telephone line and has a modem within the device
 

Read other 1 answers
RELEVANCY SCORE 65.2

Our phone just stopped working. We have a Arris Modem 4 lights are solid green, phone 1 and 2 blink green, and the battery does not light up. The phone just has a busy tone, but rings for an incomming call - still just a busy tone. Any ideas?

Wauz
 

A:Arris Modem

The exact model would help. I'm assuming this is a cable modem with VoIP phone support? Did you reset the modem and see if it fixes it? Do you also have Internet access through the phone? Does that work?
 

Read other 1 answers
RELEVANCY SCORE 64.8

Thinking about getting rid of the rented Comcast modem, and buying a Refurb Arris 822G, about $70.00, is this a wise choice, have the triple play, can this modem be used with my Asus router?
 

A:Arris TM822G Modem

Read other 8 answers
RELEVANCY SCORE 64.8

I just got new cable internet service with an Arris cable modem. I have an ActionTec router which I have used for sometime, across various connections.

I connect the Arris Modem's LAN out to the WAN input on my ActionTec and it reads the signal fine as it normally would. Only problem is that the "internet" light never turns green. In other words the ActionTec does not recieve internet connectivity from the Ariss modem. I need it to work so I can use my Wi-Fi laptop (the Arris modem does not have WiFi).

I have tried restarting both and that was no help. I tried plugging the Arris Modem directly into the PC to ensure there is internet connectivity and everything checked out.

Any ideas?
 

A:Arris Modem & ActionTec

Read other 9 answers
RELEVANCY SCORE 64

Hello all. strictly speaking of WAN speeds here. no wifi.

at the recommendation of my cable company (TWC), i got a free modem upgrade. Arris TG862. (docsis 3). my older modem (forgot what brand) was only rated at 47ish mbps max.

i'm paying for 100mbps but i found out that my router (Linksys BEFW11S4) was capping me at 20mbps. which I thought was odd cause even though my router is pretty old, i thought it was advertised/rated at 10/100.

at least this newegg site says it's 10/100. WAN http://www.newegg.com/Product/Product.aspx?Item=N82E16833124002
because of this, i decided to scrap my router and use the built-in router of the arris modem to plug in all my pc's and enjoy the super fast speeds. but i'm getting weird lag issues. If i used my search terms correctly, I think it might be DNS issues?

the actual symptoms are: if i type for example: google.com or youtube.com, it will take a long time before i actually see my browser actually start loading the page. as if it's poking around the net knocking "anyone home" and not getting a response till like 10 seconds later and then the page loads instantly. sometimes it won't even load it'll get a connection time out. but a quick refresh and it's instantly fully loaded. and my speedtest speeds are definitely at over 100. but that intermitten hangs are ultra annoying.

very very very annoying and I'm hoping to get some insight as to what might be causing this and how I can ... Read more

A:Network Advice plz (regarding Arris Modem)

Read other 8 answers
RELEVANCY SCORE 64

My speed stream 5100 started quoting on me, so had att send me a new arris router/modem thinking it would provide better wifi coverage throughout the house, when I'm really not thinking it will do this. (No antennas on this unit). Current setup is the failing seimen 5100 speed stream with cycsco wrt54g. Any advice? Really just needed to replace the modem and keep using all as I have it. Maybe the arris will work out ok, bit I doubt the range will be sufficient. I have 30 days to return it and can't try it until tomorrow night, at which my service will be turned over to the new uverse stuff. We rely on the wifi for our cell phones so I gotta figure this out quick. I don't even see a way to use my cysco extender with this arris unit. Damn, should have ckd this out more before pulling the trigger. However att told me I'd have to use this newer unit. My kids bedrooms are a ways away from the location of PC where router sits and I need that range of wifi to make it to them.

A:New uverse arris router/modem

It looks as if I must use their modem/router, but I should be able to bridge my cysco router to this att unit, correct? And I should still be able to connect my 2 tvs using my current cat5 cables, into the cysco? I just wanna bypass the att arris router altogether and just use its modem. Thinking the cysco unit better for wifi with its antenas. Gosh what a mess!

Read other 1 answers
RELEVANCY SCORE 63.2

Hey, I've been trying to get this connection to work for 2 days now and I cant do It. I hope someone here can help steer me in the right direction.
I'm house sitting for a friend and I'm trying to play WoW. I have the game on an external HD and when I try to play it on her comp at her house I get a weird entry point not found error for makesectionglobal not found in kernel.dll
I dont want to mess with her kernel because I don't want to take a chance and brick her comp. so I try to hook my laptop up to her modem by connecting an ethernet cable from my laptop to her modem...I get limited or no connectivity thing. If I attach her modem to a router and my laptop to the same router it says I'm connected and will get an Ip address but I cannot access the internet. I'm assuming the same core problem between my comp and her modem is still there when router is hooked up. I have downloaded the drivers for her modem and my comp recognizes it, still no luck tho. Please help!!! is it only possible to have her comp hooked up to this modem or am I just a networking tard. Do I have to install anything besides the drivers for the modem?

Specs:
Modem (devil box) - Arris touchstone telephony modem model tm402p
ISP: - Comcast Cable Internet
My Laptop - Dell latitude d600 P.O.S. (still runs WoW tho) Pentium M Windows XP.
Her Comp - HP pavilion 754n, Pentium 4, Windows xp home
Router - Linksys wireless-g wrt54gs - I have no wireless card so I have to hook Up my la... Read more

A:Solved: Problem using arris modem on different comp.

Did you turn off power on the modem for 30 seconds when you changed from the router to a computer? Anytime you change the attached device, that's a mandatory step.
 

Read other 3 answers
RELEVANCY SCORE 63.2

Lost the CD and I need a driver any help appreciated
thanks
 

A:I need help finding arris modem cm300a driver

Is that for USB? Try here:Arris USB Driver

moper
 

Read other 1 answers
RELEVANCY SCORE 63.2

Hello there. I've been having numerous problems with my Arris Touchstone Telephony tm602g Modem, and I am looking for assistance. I am set up with Cogeco running TV, Internet, and recently added, phone service. After switching from bell to cogeco, we switched from a wired modem to a wireless modem, this one. We used to use a linksys, but because of the new modem being wireless, the linksys is on the table being a paperweight. We currently have a desktop computer and a laptop using the modem for internet computer wise. Allow me to list the problems I have been having.

Phones die out every other day. Randomly, the telephone 1 and telephone 2 lights start blinking, and we do not get a dial tone when we pick up any phone in the house. No phone is off the hook, and the only way to fix it is to turn off both computers, make sure all the phones are not off the hook, then reseting the modem (holding the reset button for 20 seconds).

Laptop loses internet almost daily. I cant explain anything about this because the desktop computer's internet is fine throughout this whole ordeal. We just have to reset the modem 2-4 times for it to work.

The Wii, DS, PSP, and Xbox 360 cannot access the internet. It is not found as an access point when you search for one, even when the portable devices are right next to the modem.

Any help is appreciated. I've tried replacing ethernet cords, attempting to resetup the linksys (I get error 322: No linksys detected), etc.
 

A:Solved: Arris Touchstone Modem Problems

The 602G doesn't seem to be a wireless router, so you must have some other device connected providing wireless networking. If the phone lights blink, there's a problem with the modem. You'll have to have your ISP check into that.
 

Read other 3 answers
RELEVANCY SCORE 63.2

I use comcast internet and VOIP service and rent the above modem from Comcast. I purchased the exact model but when I attempt to have it installed (MAC number thing) at Comcast they have now told me twice that my modem will not work even though it is the exact model.

Arris says not true. My modem should work so Arris tech stated.

So I tried again and had no luck. Comcast's tech stated that the modem I rented was the only modem that would work. (Tech stated that Comcast modifies the modem).

Again Arris states this is not correct.

Anyone know where I might go to get addition support/suggestions.

Cliff Leonard
 

A:Comcast.net Arris dual modem tm402p/110

you need to give comcast the MAC address of your new modem and have them
'hardware provision' it for access. if that fails, tell'm you'll move your account
to Verizon (or whatever your phone company provides).

you might as to speek with a supervisor.
 

Read other 5 answers
RELEVANCY SCORE 63.2

I received a new Arris Modem from Comcast and could not firgure out why my D-Link router would not work with it. The router worker perfectly with the prior Comcast Business router/modem. And my PC worked fine with the new modem. But when I plugged my computer into the router....nothing!
After reading a bunch of similar posts on the web, I was perplexed since no one had a rational answer. I called a tech savvy buddy who nailed it. I have to say I did notice the router status showing no network connection and no cable connection ... that was the clue.
The modem has a dumb RJ45 port! It needed a CROSS-OVER CABLE!!!
Bingo! all problems solved.

I hope this post helps save some people from the frustration and day of wasted time I experienced.

 

Read other answers
RELEVANCY SCORE 62.4

Ok, I am helping a friend over the phone and am having trouble identifying why they cannot acquire DNS or even ping the gateway,
The first laptop connects without fail to the wireless signal where the second laptop is able to see the signal and acquires and ip address of 10.0.1.4 with a gateway of 10.0.1.1 but we are unable to ping the gateway. I turned off all security features in the modem and laptops that I could think of. it is as simple as an access point right now. Is there something I may be missing that needs to be disabled or enabled? I have verified that there are no static IP's set and that all is set to obtain automatically. when I do an ipconfig /release then renew, it reads that it cannot be renewed while it has its media disconnected leading me to believe that the wireless was turned off which it is not. It is associated to the SSID but with limited connectivity..how does it pull an IP and not able to ping the gateway? Security is the only thing I can think of... any ideas? sorry for the limited information as I am not sitting in from of the computers. it is 2.4ghz, channels - auto, encryption - open. thanks for the help.
 

A:Cannot connect secondary laptop to Arris wireless modem

What version of windows? Vista and 7 firewall default to deny ping.





ipconfig /release then renew, it reads that it cannot be renewed while it has its media disconnected leading me to believe that the wireless was turned off which it is not.Click to expand...

typical issue.
Get the connection and then

get a command prompt
enter ipconfig /all >myTCP.txt
now look for Node Type . . . ?? should be Hybrid

if not, save the attachment, remove the .TXT suffix and save as .REG
dbl-clicking will fix the registry to make Node Type . . . Hybrid

Disconnect from the router after applying the change - - wait 30 sec - - reconnect.




cannot acquire DNS or even ping the gatewayClick to expand...

the DNS is a real problem and the above should resolve that.

* You alread know how to see the tcp config. Here's how to TEST the DNS:

get the command prompt
ping 8.8.8.8 (good timings says you have a PATH in the Internet)
nslookup 8.8.8.8 (if you get back the name, then dns by address is ok)
nslookup google-public-dns-a.google.com (should show you the address 8.8.8.8)
at this point you should be fine.


* your real issue is Internet access, not ping, not /release and not /renew. Yeah they can be useful
but never impact email or browsing.
 

Read other 1 answers
RELEVANCY SCORE 62.4

hi, by work i mean wont work
i just recived comcasts digital tv, phone service, and broadband internet over an arris modem and have tried connecting my ps2 on line over the modem. when it tests the connection on the ps2, it takes awhile andan error message coems up indicating the operation of trying to connect timed out. i have tried power cycling abd seting up a newnetwork profile on the memory card but ti is the same result. this model of arris modem has an 8 hour battery life, which makes me unsure if im actually power cycling. any help trying to get online with my ps2 would be greatly appriciated. thx
 

Read other answers
RELEVANCY SCORE 62.4

hi,
i just recived comcasts digital tv, phone service, and broadband internet over an arris modem and have tried connecting my ps2 on line over the modem. when it tests the connection on the ps2, it takes awhile andan error message coems up indicating the operation of trying to connect timed out. i have tried power cycling abd seting up a newnetwork profile on the memory card but ti is the same result. this model of arris modem has an 8 hour battery life, which makes me unsure if im actually power cycling. any help trying to get online with my ps2 would be greatly appriciated. thx
 

Read other answers
RELEVANCY SCORE 62.4

ok i have a belkin n wireless router model f5d8236 and the wi fi doesnt work. i have a arris modem. when i hook the 2 up to enable the wi fi the modem light on the router is blinking orange and then the link light on the modem is blink too. the model of the modem is TM602G arris. could you help me with like a number to call or what to do
 

A:Belkin router wont work with arris modem

Does the ethernet cable go from the modem into the WAN port of the Belkin router?
Explain exactly how you set this up.
badness
 

Read other 3 answers
RELEVANCY SCORE 62.4

Comcast cable phone service doesn't work except on phone that is connected directly to the back of the modem. I am using an Arris TM602G modem. I have cable TV, internet and phone service. My internet works fine (except when the phone line is in use) and cable works fine. My modem is connected directly to a Belkin wireless router via an ethernet cable. I currently have two issues with my connection:

1. Phones that are NOT connected directly to the back of the router, but connected into a wall phone jack instead, have no dial tone at all
2. When phone line is in use, I lose my internet connection
 

A:keep losing dial tone using my Arris TM602G modem

Well, those are significant issues!

One reason for the phone wiring not to work is that it may still be connected to the previous wired outside phone company lines. If so, first step it to disconnect that! Next, if you have too many phones and/or other phone line connected equipment, the Arris modem can't drive the load, time to thin the herd The easiest way to do this is using a multi-handset DECT 6.0 wireless phone system, excellent range and a 4 receiver set can be had for less than $100. Plug the base station into the modem, and the others are all wireless.

As far as the phone disconnecting the Internet, that's clearly a Comcast issue, call them and complain!
 

Read other 1 answers
RELEVANCY SCORE 62.4

I recently purchased an Arris Surfboard SB6121 to replace my rental modem with Cox. I have registered the modem and can connect online while hardwired but my Belkin N150 will not connect to provide wifi. I've spent 2 hours dealing with Belkin and Cox but Belkin's solution was to extend my warranty so they could help further... or just to buy a new router. The router still works with my old modem so there clearly is just some configuration that needs to be changed. I am not the most tech savvy person so I am lost. HELP!!!
 

Read other answers
RELEVANCY SCORE 62.4

I have the subject modem which I am using with two (wired) computers. I intend to use a 3rd computer (wireless) via a Lynksys router and adapter (see my prior request). What can I do to ensure security for all 3 computers?
Thanks.
 

A:Solved: Security for ARRIS modem (model TG862G/CT

Use a non-default login password for both routers. Don't allow remote (internet) login unless you need to use that feature.

Protect both wireless networks with WPA2-PSK or WPA-PSK encryption with a strong passphrase. If you are not going to use the ARRIS's Wi-Fi disable it.

Allow physical access to the routers only to people you trust.
 

Read other 1 answers
RELEVANCY SCORE 62.4

Hi,

I've been using a D-Link EBR-2310 (wired) router in conjunction with Time Warner Road Runner Internet service for several years now. The other day, we decided to upgrade our service to cover telephone as well. As a result, Road Runner came in and replaced our old modem with a new one that works for both telephone and internet. The problem is, the D-link router does not work with this new modem. If I connect the computer directly to the modem, everything works fine. But the modem... no luck.

The model and make of the modem is: Arris Touchstone Telephony Modem, Model TM602G.

What I have tried in a nutshell...

Cloned PC's MAC Address on router
Power Cycled Everything
Updated Router to latest firmware

What I have tried in detail

Normally when the internet is connected, the modem has a "Link" light which flashes somewhat quickly. When it is hooked up to the WAN port of the router, it does not flash. Curiously, though, if I hook it up to a LAN port on the router, it flashes as if it works. But there's still no internet. And when I access the router's settings through a web browser (entering in 192.168.0.1), it shows no IP address.

D-Link provided a set of step-by-step instructions which I found under their FAQ, how to configure the router to work with cable. They basically went through cloning my PC's MAC address, power cycling both the modem and router in a specified order/duration, and telling the router to renew its DHCP release.

Th... Read more

A:Solved: D-Link Router not working with Arris Modem

Read other 15 answers
RELEVANCY SCORE 62

Hello,
I'm not much of a tech savvy guy so bare with me here, I'm currently having an issue with my router. I have a belkin n450 DB wireless router (model f9k1105v1) that has been having issues resulting in a "no internet connection". after some research on this topic, I didn't find much except that my modem (which is an Comcast arris modem) might not be able to connect to the routers settings. I have tried everything from resetting my Belkin router and unplugging everything, and still no result! - may I add this router is a solid orange colour when. it should be a solid blue - I am aware that resetting the router sets it back to factory default settings. So I guess my initial question being, since I have little experience with this situation, what steps can I take that are a bit easy for a person like me to comprehend? Thank you for your time and knowledge in advance! NOTE- I've had this issue before in the past and I solved the situation from some tweaking with the cords and it worked just fine, except I had to use the default password for the router. Although now tweaking with the cords isn't a solution.
 

A:Solved: Belkin Router not connecting to Arris Comcast modem!

Read other 6 answers
RELEVANCY SCORE 61.2

Hello. I've seen a lot of posts with similar problems here and elsewhere, but so far none of the solutions I've tried (resetting the router, power cycling everything, MAC cloning, disabling UPnP, changing RTS, fragmentation, and beacon settings, etc) have worked. My parents got the Comcast bundle with phone and now the internet doesn't work unless the PC is connected directly to the modem. When I hook up the router I can see the wireless signal with my laptop, but the link light on the modem stays off and I can't get online with either computer. (If I switch things so that the computer is hooked to the "internet" port on the router and the modem is connected to one of the four other router ports the link light blinks like it was online, but doesn't actually work.) When I go to the router status I get all zeros.

Without router:

C:\Documents and Settings\Owner>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Herb
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.fl.comcast.net.

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : hsd1.fl.comcast.net.
Description . . . . . . . . . . . : ASIX AX88772 USB2.0 to Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-50-B6-0B-89-DA
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration En... Read more

A:Solved: Can't get online with WRT160N v2 router and Comcast Arris TM602g modem

Read other 12 answers
RELEVANCY SCORE 61.2

I received an Arris TG862 modem from Time Warner Cable quite some time ago and have generally avoided it until now. I had always assumed that the TG862 was already in bridge mode and that I was only using my NetGear R6300 router for wireless, firewall etc. Recently, I was trying to open ports through my R6300, but no matter what they would always remain closed.

Sometime later, I realized that my Arris modem was most likely to blame, so I turned off both its firewall and wireless and switched it over to bridge mode. After restarting the modem, I am unable to connect to the internet. I can still connect to both my router and my modem's login page via the cord that goes from my modem -> router -> computer, but my router is not getting anything. I tried restarting my router as well, but that does not seem to help my situation. In my router's login page, it clearly tells me that the router is receiving no internet from the modem.

For now, I've factory reset'd the modem and the internet connection is fine but I still need to put the modem in bridge mode.

Thanks!
 

A:Putting Arris TG862 Modem into Bridge Mode cuts off internet

can we see a ipconfig /all when connected just to the modem please

------------------------------------------------------------------------
ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​
For windows version, XP, Vista, W7
Hold the Windows key and press R

Now type CMD

Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​
In the command prompt window that opens, type the following command:

Note that there is a space before the /AL... Read more

Read other 2 answers
RELEVANCY SCORE 60.8

I want to use my old router to have wifi. I discontinued my Verizon serivce and started using Charter which supplies an Arris modem, they told me i could simply plug the ethernet cable from the Arris to my wireless router. However on the back of the Actiontec the WAN line is smaller than the ethernet, it is phone plug size. And there are 4 other ethernet ports. Does this mean that I cannot use my Actiontec, is it useless or is there a way around this? I really want wifi and dont want to have to buy another router if I dont really have to . The action tech is GT784WNV
 

A:Can I hook my Cable modem Arris TM822A to my old Verizon actiontec wireless router

You could use the Actiontec as a wireless access point (disable its Dhcp server and connect the modem to a LAN port) but to have internet access on multiple devices simultaneously you need a router. You cannot use a modem/router as a router only.
 

Read other 1 answers
RELEVANCY SCORE 56

I just switched broadband providers and they switched out my surfboard SB6121 to an Arris TM1602.  Now my laptop won't connect., no matter what I do..
I tried resetting the modem/router,, uninstalling/reinstalling the Dell Wireless WLAN 1501 Half Mini-Card Driver, removing/readding the SSID etc etc...  This is driving me freakin banannas..

Read other answers
RELEVANCY SCORE 53.2

I just got Comcast digital phones, they gave me a Arris TM502G router. What is the proper wiring of the telephone cables. Comcast wired from wall plug to router and from router to external fax machine with the use of a splitter plugged into the number one phone plug on the back of the router. My fax machine is not receiving faxes, it is a HP officejet v40 all-in-one. There is also a answering machine hooked up to a phone outlet downstairs in the kitchen.

Does anyone have any ideas?
 

A:How do I wire TM502G router for fax machine?

When I got my Vonage VoIP, I just disconnected the house wiring from the NID (Telco service entrance) and plugged the VoIP adapter into a handy phone jack. All the attached phones are functional with that connection.
 

Read other 3 answers
RELEVANCY SCORE 53.2

Hey everyone.

I've ran into a problem that I can't quite figure out. My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.

Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP
When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'

-Restored my PC to a restore point where the Internet was working

All of these options did not work.

What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.

I'd be glad to prov... Read more

A:'No Internet Access' IP address shows router not the modem IP address

That would be your ISPs' address, the router would probably be 192.168.0.1 or 192.168.1.1 so, in the properties, advanced button for the ipv4 of your adapter, make sure both settings are on auto, and add the correct router address in the gateway box.

Read other 4 answers
RELEVANCY SCORE 52.4

Hi,
I downloaded windows 10 and now my IPV4 DNS server and Modem have the same address. I set DNS and IP to Auto in windows 10 and restarted. it will not change. so I can't stay on internet. can anyone Please Help me. Ethernet hookup

Thank-you
Moose

Read other answers
RELEVANCY SCORE 49.2

I first had a dial up modem. I got frustrated with that, so I got DSL. I got a virus, so I purchased Norton Internet Security package with firewall, etc. via download. When I attempted to use the Live Update feature, I got this message:

Initializing...
Connecting to liveupdate.symantecliveupdate.com...
Unable to connect to host
LiveUpdate could not connect to your Internet Service Provider. Verify
your dial-up information is correct.
LiveUpdate session is complete.

I then deleted the dial-up configuration thinking that it would then recognize the DSL connection. Not so! I'm getting the same message. Any suggestions as to how I can get the Live Update feature to work for me? (Windows XP)
 

A:Modem configuration

Read other 9 answers
RELEVANCY SCORE 49.2

hi,

I have attached an image to this thread it relates to the network configuration in that image in one of my friend's system(XP Professional) the first two options are disabled and the third option got highlighted i.e.Use the CD I got from an ISP but to proceed further he want the option set up my connection manually but as i said the first two options are disable so to get those first two option enabled what would be the solution for that? could anyone please help me?

Awaiting for the reply.

Thank you for your valuable time.
 

A:ip address configuration

Please don't post a ZIP file, attach the files directly to the message.
 

Read other 1 answers
RELEVANCY SCORE 48.8

Hi all. I recently changed internet providers and kept my existing modem. I have no idea how to change settings in the modem to get the new internet.
 

A:Changing modem configuration

If you know nothing about your new ISP you will need to ask them about their service. You may not even be able to use the modem if, for example, you switched from DSL to cable.
 

Read other 1 answers
RELEVANCY SCORE 48.8

hi

my modem configuration is set to a speed of 115200 kbs
but the maximum speed it can do is 921600 kbs

should i change it to this speed or is there a reason that it is set at a slower speed?

all hardware features are enabled
flow, error and compression.

thx lee
 

A:modem configuration query

What type of modem? (e.g.56k dial-up?)

The 115200 strongly suggests that is the port speed that it connects to the modem.

As long as that is as fast or faster than the modem speed, no benefit would be obtained by having a faster port speed.

E.G a 56,000 bps modem is well catered for with a 115200 bps port speed.
Its twice as fast as the modem is capable of delivering data.

Supply some more info if possible.
 

Read other 1 answers
RELEVANCY SCORE 48

Have NT 4.0

Recently downloaded upgrade to IomegaWare.

After upgrade and reboot, received message that modem was not properly configured for WinFax. Went to Setup, but could not get modem recognition nor add modem... even thought port search recognized modem on Com 2. Went to Control panel, but when I selected Modem, it would not respond. Checked event log and found following message:

Event ID 7028
The Control Registry key denied access to SYSTEM account programs so the Service Control Manager took ownership of the Registry key.

Anything I can do short of reloading WINNT?
 

A:{Advice Offered} - Modem Configuration

Read other 7 answers
RELEVANCY SCORE 48

hi hope someone can help me.

How can i delete my nat entries where it says create protocol?

I am a beginner at this. I want to be able to make it more secure.

How can i do this?

Can i edit it using notepad and then import it using the browser?

Also my little network has 3 windows xp workstations and have been setup using windows xp networking ie. i created a disk and setup the other workstations on the network. Everything is working ok except for accessing files on the network. It takes about 2-3 minutes to connect to a share on another computer and access the files. Can someone tell my why?

Does the hostname in this firewall have to be the machine the modem/router is connected to?

here is a copy of my firewall

[ env.ini ]
set var="CONF_REGION" value="Australia" set var="CONF_PROVIDER" value="BigPond" set var="CONF_DESCRIPTION" value="BigPond defaults" set var="CONF_SERVICE" value="Router,PPPoA,DHCP,NAT,VPI/V* * CI 8/35" set var="CONF_DATE" value="Configuration modified manually" set var="HOST_SETUP" value="auto" set var="UPGRADE_URL" value="http://www.speedtouch.com/u* * pgrade500.htm" set var="COLUMNS" value="80" set var="ROWS" value="24" set var="SESSIONTIMEOUT" value="120" set var="HOST_MAC_ADDR" value="xxxxxxxxxxxx" set var="HOST_IP_A... Read more

Read other answers
RELEVANCY SCORE 48

To summarise:

We tried some time ago getting David's XP notebook and his Win7 desktop to share the Internet connection that his desktop has via an ADSL modem and telephone line.

We wanted to get the two PCs to communicate with each other via the Wi-Fi adaptor card in the desktop and the built-in Wi-Fi adaptor in the notebook and then to share the Internet connection. We had no success.

Last weekend we tried to get David's Win7 laptop and Win7 desktop to share the Internet connection that his desktop has. No success again.

At the moment each computer lists the other one in its "My Computer" page.

The TrendNet Wi-Fi software in the desktop indicates that it has 100% signal strength from the laptop.

Both computers are set to "Home" type networks.

We can start a Home Group on either computer but cannot get the other one to join - an error is reported. We use the correct password when trying to join - the password displayed by the other computer when its Home Group is created.

We cannot get the ICS service to stay started. After attempting to start it an error is reported that says "ICS service started and then stopped".

We have checked all ICS's dependant services and they are all running.
 

A:Solved: IP configuration address not shown.

Read other 6 answers
RELEVANCY SCORE 48

Is there any command to tell me what configuration a particular remote server is having( i know the IP address of the server)
 

A:i want to know the configuration of a remote server from its IP address

Read other 6 answers
RELEVANCY SCORE 48

I have three computers on a wireless network using a Draytek Vigor 2800g router. Two are connected on WPA and one, a tablet, on WEP (its internal wireless adapter is WEP compatible only) - so I am forced to a mixed network.

All PC are running Windows XP with SP2.

The WEP machine as started to connect using IP address 169.254.203.81 - I had this happen on another machine, but was able to reconfgure the connection to remove it and get it connecting with a dhcp address. It just won't go away on this one. I've tried resetting the router, reconfiguring the connection, Network Magic - in fact it started to do it after I started using Network Magic (is there a relationship)...

ipconfig lists this 169...address as the Autoconfiguration IP Address...but I cannot figure out how to alter it...It should be allocating via DHCP. It does say DHCP and autoconfiguration enabled.

Any suggestions?
 

A:Strange IP address in automatic configuration

Read other 7 answers
RELEVANCY SCORE 47.6

I had a couple of guests over and they were having problems getting online (actually they were on for a day but one laptop dropped) the problem was with the guest laptop itself. While troubleshooting we opened the router as an access point. It gave us a new address for configuration but did not get it all down. It is a Belkin Wireless G router and the previous config address was 192.168.2.1 the new one was 192.168. then 2 0r 1 follwoed by three number sequence I believe starting with 2 (I tried 245 and 254). When I right click on my wireless connection icon and go to properties none of the address work some now start with 70. Is the a way to find the address and if not how do I reset my router?
 

A:Solved: A Router Default Configuration Address?

Read other 6 answers
RELEVANCY SCORE 47.6

Now that I've upgraded to MS Office 2003 I'm having a problem synchronising my Palm with Outlook. I have to stay at the computer. I can't walk away and do something else, because when it comes time to synchronise the address book a dialogue box pops up asking if it's all right to let this program access the book. Protection against hackers.

Is there any way I can configure this so that it knows that it's ok for my synchronising program--the standard one that comes with Palm--to access the address book? As it stands now I have to do it every time by hand.

Windows XP.
 

A:Outlook address book access configuration

This really doesn't answer your question, but how often do you need to syncronize your address book? Can't you choose to do it manually? Do your addresses change that much that once/twice a week sync couldn't be done manually?

Just curious.

MBN
 

Read other 2 answers
RELEVANCY SCORE 46.4

my internet connection uses PPPoE to connect to the internet. i'm trying to set up the router for this configuration but it does not work. if there is anything else i need to post up pls tell me...help!!
 

A:Configuration problem for belkin adsl2+ modem with wireless router

the MODEM uses PPPoE, the router should not. the ADSL modem will hold the connection
regardless of anything being active on your router or systems, so imo, the router
should not be configured for PPPoE.
 

Read other 1 answers
RELEVANCY SCORE 46

pls i need wireless DPR2320R2
help in opening the ports on my the firewall ok.problems with emule tcp test always incorrect incorrect always pls help
willy

< Moderator - I have removed the large font size - no need for that here >
 

A:wireless DPR2320R2 modem gateway impossibble to acces to the modems configuration and

eMule
http://en.wikipedia.org/wiki/EMule
eMule is a free peer-to-peer file sharing application for Microsoft Windows.Click to expand...

Please read the rules again when you joined
http://www.techguy.org/rules.html
P2P Instructions - We do not support P2P file sharing applications and any threads requesting help for such will be closed. This includes Torrents, Kazaa, LimeWire, RapidShare, Pirate Bay, and the like. If you're interested in the topic, you are free to discuss it on our site (and please visit StealingIsIllegal.com), but information on how to use them will not be provided.Click to expand...

closing post
 

Read other 1 answers
RELEVANCY SCORE 46

I have my main computer with the following setup

Windows Vista connected to the router then to the modem in Bridge Mode (so that I can use NAT1 with my PS3), thus internet works fine for both, my Main Comp (Desktop) using PPPoe and PS3 using a wireless connection between my router but also through PPPoe.

However, in terms of my secondary computer (Desktop), I have a USB Wireless Adapter, but I do not seem to be able to find the configuration for going on to the internet through the router but to use PPPoe.

The following are my products

Router - D-Link DIR-625
Adapter - D-Link USB Wireless Adapter DWL-G122
Modem - SpeedStream 5200

Thanks
 

A:Solved: Modem Bridge Mode + Router + USB Wireless Adapter Configuration

I'm a bit confused. If you're connecting PPPoE with two devices, that indicates you have two modems, which sure doesn't sound right. What are you really doing here?
 

Read other 3 answers
RELEVANCY SCORE 46

Hi,

I have an issue relating CONFIGURATION FOR MULTI USERS THROUGH ADSL
MODEM (UT300R2) of UTSTARCOM for connecting BSNL Broadband.

While configuring for Single User successfully ,all sites connect
comfortably, but, when I do successful configuration for Multiuser,a
few sites like -- any of the Yahoo or Yahoomail sites and
niftysignals.com --- fail to get connected, and ,showing error as
"Error 101 (net::ERR_CONNECTION_RESET): The connection was reset".

I had taken up this issue with Yahoo, who told this is a problem to
be resolved by the service provider.The service provider being BSNL,
when I took up with them,they have also been unable to resolve this.

But, surprisingly, this was not such,about 2 years ago, when all
the yahoo sites were opening easily , under Multi Users
Configuration too.

My PC is pentium IV ,with 1GB Memory, and Windows XP with service
pack2 installed.The browsers used are IE6 and Google Chrome.I have
also tried by removing Fire Wall and AVG Antivirus software ,but to
no positive result.

Kindly, help me resolving this issue and if any suggestion,please
<removed email address - etaf moderator >

pdmdl (Prabhat)
 

A:Bsnl broadband multiuser configuration -through adsl modem of utstarcom -ut300r2

we do not support offline support using emails here
so please do not post email and keep all support in the forum
also by adding your email you will get a lot of spam

so I have removed the email address
 

Read other 1 answers
RELEVANCY SCORE 46

I recently installed a DSL modem and hooked it up to my Router. Now both of them have firewalls installed, but if i connect to my modem via the 192.168.xx.xx address, all of my computer mac addresses are listed. why would the modem have that information, when the router is the one who should care...

I have static ips set up for each computer and my router set to DHCP. dont ask why, it just works.

But im worried that all someone would have to do is connect to my modem to get to my computers, they can completely bypass my router, as if it's not there :S
 

A:DSL Modem and MAC address

Read other 14 answers
RELEVANCY SCORE 46

I have already contacted CISCO and they do not have the MAC address because the modems warranty expired in 2015. I have the Cisco 881 Modem, is it possible to hook it up to my computer to view the MAC address?
 

Read other answers