Over 1 million tech questions and answers.

Windows update fails to install

Q: Windows update fails to install

After help cleaning the Malware and junk from this laptop the windows updates fail to install. I rebooted and retried to no avail. I couldn't find a wi 8 problem like this so I'm asking if anyone can help clear this up?

RELEVANCY SCORE 200
Preferred Solution: Windows update fails to install

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows update fails to install

Hi

Read other 21 answers
RELEVANCY SCORE 67.2

I did a repair install of W7 Ult. x64 SP1. Applied all updates, but if fails to install IE10 update :

Attachment 286642

(as you see it is a dutch version).

If have run sure & sfc /scannow. Both report no problems.
CBS files are attached.
Please help ?

A:Windows update fails to install IE10 after repair install

Ok, it is working now. Steps I took :

1) Hide the update for IE10
2) Download and tried the installer for (my localized) IE10 : failed to install
3) Started windows update, suddenly there where 43 optional updates available including IE9
4) Installed all optional updates except IE9
5) Retried the installation of IE10 (not visible any more in updates) : succes

Hope someone else can bennefit,

Regards, Jan

Read other 1 answers
RELEVANCY SCORE 65.6

when windows update fails to install a KB, and it lists it as FAIL.

why wont it reinstall or re-download ?? Or does vista reinstalls it when you restart the computer?

A:when windows update fails to install?

Try it from the administrator account. Do you see custom and express?

Read other 6 answers
RELEVANCY SCORE 65.6

Running Windows 2000 Pro SP4. All Microsoft updates download and install without problem except NET.Framework 1.1 Service Pack 1. The update downloads fine but fails to install. No error message just fails to install and recommends trying again. No other perceived problems.
 

Read other answers
RELEVANCY SCORE 65.6

Sorry for the short title, I didn't know how to word my issue.

My problem started when I had started getting BSOD's. To fix I had de-fragmented (didn't work) and then I had to do a system restore which appeared to fix it although it didn't keep my files instead deleted them. I tried installing a game on steam that required framework 3.5 but It failed to install giving me this error code: '8007371B'. I had researched and found no luck with finding any fixes, it's not even heard of. I tried doing a factory reset with comes up with the same error code, I have also tried upgrading to win 10 and using a media (installation disk) to install which had no luck and come up with the same error code.

I am desperate as soon I will not be able to upgrade to windows 10.

-Fraser J-

Read other answers
RELEVANCY SCORE 65.6

I run XP SP3. Automatic updates is turned on and works all the time except this one:Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008 (KB953297)It would seem that this is an old update as I run SP3 and this appears to be an SP1 update. If there are more updates it installs them but fails on this one.The machine works fine. Is this a symptom of a larger issue?Thank You

A:Windows Update fails to install

That update means it is for .NET Framework 1.1-SP1. SP1 refers to the NET Framework,not your XP version.
Go to the Windows Update website,let it scan your computer for updates and this update shows again,try to install it there.If it fails again then don't worry about it.
Have you checked your"Add/Remove Programs" to see if you have .NET Framework 1.1 installed on your computer,or .NET Framework 1.1 SP1?

Read other 13 answers
RELEVANCY SCORE 65.6

Windows update keeps reminding me to install a Security Update for Microsoft .NET Framework, version 2.0 (KB928365). No matter how many times I download the 14.7mb file and successfully install it, the update shield keeps reappearing to remind for another installation of the same update. Would appreciate help in resolving this issue. Thanx.

A:windows update fails to install

I am having the same problem. Will someone please help?
Thanks

Read other 1 answers
RELEVANCY SCORE 65.6

I'm simply attempting to run update on my Windows 7 machine. Update will not run, downloading and running the SP1 update fails, downloading and running the Update Readiness Tool fails, trying to launch a troubleshooter fails. I ran sfc and have attached the log along with all the error codes screenshots. I have no idea how to proceed from here other than to drop this machine off at the nearest recycling center.

A:update fails, SP1 install fails, troubleshooter fails

Looks to me like you're having problems accessing the COMONENTS registry hive - although I would have thought that would also make a SFC scan fail.

I suspect I know what the problem is - let's see if a different tool can expose it...
I need to see a full copy of the report produced by the MGADiag tool
(download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.x

Read other 3 answers
RELEVANCY SCORE 64.8

First of all, I'm new here, so try to be patient as I stumble through the rules.
Normally I'm pretty good at fixing software issues, but this one has me stumped.

I have a machine running Win7 h/p which seems to have installed any other updates fine, but always chokes on IE10, throwing "Code 9C59 Windows Update encountered and unknown error."
(As a side note, I've *never* seen it encounter a *known* error.)

What I have done with no success:
Renamed the SoftwareDistribution folder.
Turned off Norton's 360.
Uninstalled IE9 and reinstalled (it said I had a newer version of IE9 installed *after* I had removed it and rebooted!)
Tried downloading and running the redistributable installer for IE10.

All failed. I have since downloaded and run SURT, run an sfc scan, and checked the Windows error log while I waited. There are loads of instances of this in the event viewer:

"Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7 for x64-based Systems."

I compressed a copy of the CBS folder and attached it.
Thanks in advance for any help.
Greg

A:*Only* IE10 install fails in Windows Update

The errors from the CheckSUR log are these....

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_2_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2817183_RTM~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_1_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_2_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_for_KB2817183_RTM~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
The CBS.log appears to be incomplete - it ends a lot earlier than it should do - but still shows the following error....

Code:
2013-08-06 14:30:23, Info CSI 0000009d [SR] Beginning Verify and Repair transaction
2013-08-06 14:30:24, Info CSI 0000009e [SR] Cannot repair member file [l:20{10}]"csrsrv.dll" of Microsoft-Windows-Csrsrv, Version = 6.1.7601.18113, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Please reboot and post the new CBS folder - meanwhile I'll try and produce a fix protocol for the CheckSUR errors.

Read other 9 answers
RELEVANCY SCORE 64.8

Hope somebody can help please?
Windows Pro x64 SP1.
Trying to install KB2592687 either with Windows Updates or manual install fails on one workstation.



-
System













-
Provider










[
Name]
Microsoft-Windows-WindowsUpdateClient









[
Guid]
{945A8954-C147-4ACD-923F-40C45405A658}


















EventID
20

















Version
0

















Level
2

















Task
1

















Opcode
13

















Keywords
0x8000000000000028
















-
TimeCreated










[
SystemTime]
2012-10-25T15:03:37.322957500Z


















EventRecordID
151560

















Correlation
















-
Execution










[
ProcessID]
404









[
ThreadID]
8024


















Channel
System

















Computer
tech009.xxx.local
















-
Security










[
UserID]
S-1-5-18












-
EventData









errorCode
0x80070002








updateTitle
Update for Windows 7
for x64-based Systems (KB2592687)








updateGuid
{D30E6B99-5CA6-49D4-83C5-7543236D341B}







Thanks for looking
Cheers
GRaham



updateRev... Read more

A:Windows Update KB2592687 fails to install

I just ran across this with a user and after some research it ended up being that the Windows Firewall Service was missing.  Please confirm that your "Windows Firewall" service is listed in "Services.msc".  If not see: (http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/5366225a-46e7-4d6c-a389-8bd18a5c3aad). 
There is a link inside that post that resets the service.  Once you run the tool to fix the service restart the computer and ensure the "Windows Firewall" service is listed and proceed to try your update again. 

The user I worked with had McAfee Firewall installed and I can only assume it removed the default Windows one which is apparently a prerequisite for this patch.
HTH,
John

Read other 64 answers
RELEVANCY SCORE 64.8

I cannot get my windows update to work correctly. WU 7.2.6001.788 tries to install itself and fails. I've changed the name of the software distribution directory to "erase" the memory of old updates and that worked but still no luck installing WU.

THanks in advance for your help.

A:Windows Update 7.2.6001.788 Fails to install

Try installing the standalone package manually from here: How to obtain the latest version of the Windows Update Agent to help manage updates on a computer

Read other 1 answers
RELEVANCY SCORE 64.8

I'm using Windows XP, SP3. My computer is a Dell Optiplex GX270 (full tower, not the smaller horizontal things), 3.20 GHz processor with 1GB RAM.

I tried to use Windows Update today after finding out that I 11 critical updates. They all downloaded, but when it goes to install, it just fails. I've turned off my anti-virus, and my firewall. I've restarted, and nothing is working. I'm stumped.

A:[SOLVED] Windows update fails to install?

Is this right after you installed SP3?

Try this:

1. Re-register the Windows Update DLL with the commands below

Click Start, click Run. or Windows key + R (faster)

Copy and paste each of the following commands. Press ENTER after each command.

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

Restart computer.

Then run the update again . .

Read other 8 answers
RELEVANCY SCORE 64.8

Windows update KB974431 x86 always fails to install on my Windows 7 rtm build 7600 ultimate x86.

Any solution ?

A:Windows update KB974431 fails to install

I've read here and elsewhere that this is due to an invalid key, supposedly you need to remove your bad key, extend the trial period if necessary, and then you can install the update

Read other 9 answers
RELEVANCY SCORE 64.8

For more than 2 weeks I have been trying to install windows security update KB2564958 and i will fail to install giving error code 0x80246007. I looked up this error code online and it means “NOT DOWNLOADED” but I am sure it was downloaded because I went directly to microsoft.com and looked up the stand alone of this update and downloaded it and my download manager showed the progress bar downloading 744 KB which I saved to desktop but when I tried to onstall it the setup was interrupted at the beginning saying “Setup was cancelled”.

I have scanned my pc with Spybot, Malwarebytes, Superantispyware, Norton Security suite and they found no viruses or troyans at all (note that I don’t have any antispyware actively monitoring on task-bar I use all of them manually to scan so there is no conflicts).

I ran Chkdsk and found no errors. I ran Registry First Aid and clea-ned the registry to no avail, this up-date will not install. There must be some bug or this update was corrupted since they offered it. I have tried several options that I found online and did not solve the issue. My Norton protection and all other softwares never interfered with Microsoft Updates.

I contacted Microsoft support and after they gave me a list of several options to solve the problem that I followed to the letter to no avail they asked me to use (and pay) phone support and I replied to them that Microsoft offers FREE complete support for problems related to Windows security updates and I refuse to ... Read more

A:Windows update KB2564958 fails to install

Read other 8 answers
RELEVANCY SCORE 64.8

Hi,

I am trying to install Windows Update KB3074543 but it fails over and over. If anyone has any suggestions/thoughts, please let me know.

Thanks,
Kevin

A:Windows Update KB3074543 fails to install

Please follow the Windows Update Posting Instructions
and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 1 answers
RELEVANCY SCORE 64.8

Hey guys,
I am having this problem quite a long time now. Whenever I want to install updates from windows update in order to be able to upgrade from Windows 8 to 8.1, it shows me message while rebooting: Failure configuring Windows updates, Reverting changes, Do not turn off your computer. Then showing me couple of these multiple times:
and yes, you guessed it, I am once again where I started. I tried literally everything I found on the internet, and nothing ever worked. I just want to upgrade to Windows 8.1(which I can't aswell but I think the reason why, is Windows Update). My last chance is reinstalling Windows but I would like to solve this with different option. Thank you for any tips or anything that could eventually lead to solving this problem of mine.

A:Windows update fails to install updates

This is a BSOD problem. Please create a topic over there and include reports needed with your report.

Read other 1 answers
RELEVANCY SCORE 64.8

I have been trying for the past 2 months to get KB952241 to install, but it continues to fail. And I cannot get any help from Support except to direct me to this forum. So, if there are any MS people on this thing, please advise as to how to get this installed. I have log files from the installation if needed. Thanks.

A:KB952241 Windows Update Install Fails

This is a Security Patch for Microsoft Visual Studio 2008 ... Do you have this installed??

Read other 9 answers
RELEVANCY SCORE 64.8

As the title says this particular update fails to install. It tried to automatically one day and still does every time I shut down my laptop.

Error code is: 80070005

CBS zip is included as attachment.

Have thuroughly checked my computer for viruses and malware and its totally clean, also went through steps to remove any corrupted files but it still wont install.

Help greatly appreciated.

A:Windows update KB3035583 fails to install

I can't see any attachment?

That said the 70005 error does have at least one known cause...
https://support.microsoft.com/en-us/kb/968003

Read other 6 answers
RELEVANCY SCORE 64

Hi. Because I recently formatted my computer's hard drive, I have had to go online and redownload all of the critical and other windows updates for my Windows XP Pro computer. When I first started to download the updates, I had 19 Critical Updates to download. Now I think I have 10 or something like that. Well, these last 10 or whatever absolutely refuse to install! They are apparently downloaded though because I attempt to redownload them and they "download" at speeds way faster than what dialup is capable of. Well, then it proceeds to install the updates. However, every single update fails. During the attempted installation of these updates by Windows Update, my computer accesses the floppy drive for some unkown reason. It does this only once or twice. I believe that during these downloads I am running programs such as Norton Internet Security 2002 (but I don't know why this would affect it because my other downloads completed fine with this and the rest of the programs mentioned here running). I was also running Windows Messenger, Yahoo Messenger (I think), Kazaa Lite (I think), and Norton Antivirus 2002 (with Autoprotect enabled). I have not tried downloading these files with any of these programs disabled. Oh yeah, I use AOL for my Internet connection but I use Microsoft Internet Explorer 6.0 to do most if not all of my web browsing which does include Windows Update. Please help me with this problem! I am quite stumped really. I have tried multiple (5... Read more

A:Windows Update Fails to Install Critical Updates

Read other 9 answers
RELEVANCY SCORE 64

Windows 10 Cumulative Update KB3197954 Fails to Install as Well

Windows 10 cumulative updates are certainly pretty helpful for the majority of users running Microsoft?s latest OS version, but at the same time, they are turning into sort of nightmare for others who can?t simply install them successfully.

Issues with Windows 10 cumulative updates have been around for a while, and Microsoft has tried to fix them on several occasions, but for some reason, they keep coming back pretty much in the same form.

KB3197954 makes no exception, and after being pushed to Windows 10 users last week, it appears that it fails to install on a number of machines due to a cause that?s yet to be determined.

More than just installation issues
Posts on Microsoft?s Community forums are pointing towards various problems experienced with cumulative update KB3197954, including system freezes, but in most of the cases, it?s the typical ?failing to install? issue that makes it impossible for some users to deploy the patch on their computers.

?Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3197954) keeps failing to install on my system. The install starts fine but while restarting claims the install has failed and reverts everything. Windows update history only tells me that the update ?failed to install,?? one user is reporting, adding that the error that he gets is ?Installation Failure: Windows failed to install the following update with error 0x800F... Read more

A:Windows 10 Cumulative Update KB3197954 Fails to Install as Well

Checked, not available in my area as of yet.
Valuable share Exterminator, thanks.
 

Read other 2 answers
RELEVANCY SCORE 64

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

P.S. I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.

If you want, you can add me on Skype: septurae

A:Windows 8 fails to install EVERY update, error 0x800f0922

have you tried to run
Code:
chkdsk c: /f /r /x


? I had Windows Updates failing recently and ran chkdsk by booting from the Installation disk (so that the OS was not running and the HD could be unmounted). It found bad sectors and fixed them and the updates installed perfectly fine after that.

Read other 1 answers
RELEVANCY SCORE 64

Yesterday I downloaded and installed latets WinXP updates. Was not able to install Server 2005 SP2 update. Found following information from their support website:http://support.microsoft.com/kb/957008When you try to install a security update for Microsoft SQL Server 2005 Service Pack 2, Microsoft SQL Server 2005 is not successfully updated. This issue occurs because the rollback process for the security updates incorrectly removes the SQL Server 2005 service accounts from the respective local SQL Server service groups. CAUSE: This issue occurs because the rollback process for security updates incorrectly...This issue occurs because the rollback process for security updates incorrectly removes the SQL Server 2005 service accounts from the respective local SQL Server service groups. The permissions are granted to local service groups and not to the service accounts. Therefore, the services cannot access the required resources, and the services cannot start.RESOLUTION: To resolve this issue, follow these steps: 1. Identify the SQL Server 2005 service...To resolve this issue, follow these steps: Identify the SQL Server 2005 service group that is located on your computer. To do this, follow these steps: a. Click Start, click Run, type compmgmt.msc, and then press ENTER. b. Expand Local Users and Groups, and then click Groups. 2. The SQL Server 2005 service group starts with "SQLServer2005." Identify each group, and then double-clic... Read more

Read other answers
RELEVANCY SCORE 64

Help!
I have created the Senslogn Registry, deleted SoftwareDistribution, Edb.log, Catroot2, Checked all services, Checked the Registry Key "NoWindowsUpdate" I have been spending hours trying to fix 0x80240020. I need to have someone tell me what the problem could be, I am an administrator running Windows XP Pro SP2

A:Help with 0x80240020 Windows Update fails to Install Updates

Please help.

Read other 3 answers
RELEVANCY SCORE 64

I just downloaded 102 updates for Windows and Office it is approximately 600MB and above. After downloading, some updates maybe, 23 failed to install and 3 were said to be not needed. And I restarted my PC, after restarting, Windows Update prompts me to install the remaining updates which is not installed for the first time. Then It installs the 90% then restarts the machine, after restarting the remaining not installed updates installs successfully. What maybe the cause of that problem?

Sorry for the English. I'm Filipino

A:Windows Update fails to install updates for first time

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 64

Windows Update installation of Win7 SP1 (updating existing version of 6.1.7600.16385) reports the install as successful until reboot, then says successful and unsuccessful in the same dialog box. Error ID is 80242016. Subsequent run of windows update shows SP1 not installed. Problem repeats, even after following all steps in troubleshooting, including running the recommended hot fix for KB 947821, troubleshooting, & turning off anti-virus. Also, the windows update troubleshooter identifies my system as AMD64 architecture even though it is Intel I7 2600K. System infomation id's the CPU correctly. Any suggestions? System MB is ASUS P8P67 PRO, 16GB memory, AMD Radeon HD 6800 Series video card.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 64 bit
Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 16360 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 1907626 MB, Free - 1744588 MB;
Motherboard: ASUSTeK COMPUTER INC., P8P67 PRO
Antivirus: Norton Internet Security, Updated and Enabled
 

A:Windows update install of Win 7 SP1 fails with error 80242016

Not the same symptoms, but check out this sticky thread to see if anything there works for you.
 

Read other 1 answers
RELEVANCY SCORE 63.6
RELEVANCY SCORE 63.6

I have been able to download the updates with WSUS, however, I am stuck on 'Listing IDs of missing updates'.
Malwarebytes and Spybot are the only programs on here at this time that are even close to seeing something viral. Cryptoprevent was not causing a problem to my knowledge.

I stopped giving windows and WSUS time after 14 hours of no discernible improvement. I even made the automated ISO and tried installing from there.
The Internet works with everything else that's stock in Windows. I updated to IE 11. Lenovo needed .NET framework 4.0 and their driver updater worked great.

I don't have the original Lenovo Discs. They think I am going to buy them again. M$, of course, won't give me a clean ISO due to OEM status. I found the ISO another way.

Is there a specific KB that can update Windows Update?
I can't even get the .msu to install from this thread windows 7 update stuck at "checking for updates..."

3050265 was the KB... Thanks Everyone!

A:7 Pro Fresh Install - Windows Update fails - WSUS hangs

Hi and welcome to SevenForums,
You can get installation media with this for free and yes it does get the iso from Micro... servers
https://www.heidoc.net/joomla/techno...-download-tool

It's a lot easier to clean install these days with the unofficial sp2
There are essentially 3 updates needed for a clean install of windows that will get you updated through April of 2016

KB3020369 & KB3125574 & KB3172605 all can be downloaded from the catalog using internet explorer
Microsoft Update Catalog

https://blogs.technet.microsoft.com/...ows-7-and-8-1/
When manually installing updates you need to switch your update settings to Never check for updates and restart the machine first.

After restart you will need to ensure the built in windows update service is stopped and set to manual first too or it will conflict with the stand alone installer.

Afterwards reset the windows updates service to what it was before and update settings to your preference and check for updates
Should be only 50 or so updates left to install.

Or you can get all three updates off my OneDrive
https://1drv.ms/f/s!AsjD7o6P3KLKj2TjShn8-SumV1rr

Read other 3 answers
RELEVANCY SCORE 63.6

This is on a friends Lenovo B520 running Windows Home Premium 64 bit.

I've found that this PC has been failing to install updates for some time now. It's still running IE9 - I can see previous failed attempts at installing IE10 and now it's failing to install IE11 in the Windows update control panel.

I've run the SURT and sfc /scannow

The CHECKSUR.log lists 127 corrupt MUM and Cat files but I'm unable to locate good versions of these to start attempting repairs. I've attached just the log files from the CBS folder as including the CABs meant the attachment was too large.

Thanks for any help you can give.

logfiles.zip

A:Windows update fails to install IE11, error 9C57

Here's the summary from the CheckSUR log...

Code:
Summary:
Seconds executed: 4517
Found 254 errors
CBS MUM Corrupt Total count: 127
CBS Catalog Corrupt Total count: 127
Luckily, they all appear to relate to one update - or I'd have been reluctant to attempt anything short of a repair install.

The SFC results appear to have rolled off into the Persist files - please post the two latest CBSPersist files so I can take a look at them.

I'll post a fix for these file later (maybe tomorrow, though)

Read other 9 answers
RELEVANCY SCORE 63.6

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.

But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)

Any help would be appreciated!

A:Windows 8 fails to install EVERY update, error code 0x800f0922

Hi Septura,
After checking the log you provided, I find two error messages.
1. failed to set task enabled status., error = 0x80071A91
2. WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Please use the following command to fix your issue.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note: Replace the C:\RepairSource\Windows placeholder with the location of your repair source.
Best regards,
Fangzhou CHEN

Read other 8 answers
RELEVANCY SCORE 63.6

Hi.

Th problem is that all windows updates are failed to install (around 27 updates) since the 17/May.
I tried everything from deleting temporary files, doing malware check, hard disk check for errors, still could not solve it.

Any ideas?

A:Windows update fails to install updates (Error 66A, 8007006E)

Troubleshoot common installation issues in Windows Update, Microsoft Update, and Windows Server Update Services would seem to apply here.
Run the Fixit, and see if it helps - make a detailed not of any errors produced along the way

Read other 9 answers
RELEVANCY SCORE 62.8

Windows XP SP3 [32-bit] Internet Explorer v8

Microsoft/Windows Update works when you let it "automatically" install updates - i.e. Click on "Turn Off".

It fails when I try to do it manually.

NOTE: It is only the install that fails - "A problem on your computer is preventing updates from being downloaded or installed". I have no problem selecting and downloading updates.

I have tried a number of ideas posted here and elsewhere. But, so far, nothing has resolved the issue. This is not a result of a repair, serivice pack update, etc. I tried Dial-a-fix also, but it did not work either.

A:Microsoft/Windows Update Install: Fails Manually - Works Automatically

http://wiki.lunarsoft.net/wiki/Dial-a-fix

Run ALL these. If that doesn't fix it, hit the tool button and reinstall BITS.

Read other 19 answers
RELEVANCY SCORE 62.8

Very troubling experiences lately. Can't download any Windows Updates, and I get a NSIS Error when trying to download any kind of software from the internet, from valid sites like Kaspersky, Bit Defender, or gaming sofware from legit companies. McAfee fails to Update new virus definitions. I don't know what to do. This is a 7 month old laptop. Windows 7 64 Bit. Here's the Hijack This Log


Code:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:06:43 AM, on 2/1/2013
Platform: Unknown Windows (WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Application\iusb3mon.exe
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\HPOSD.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPMSGSVC.exe
C:\Program Files (x86)\CyberLink\PowerDVD10\PDVD10Serv.exe
C:\Program Files (x86)\CyberLink\Shared files\brs.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\CyberLink\YouCam\YCMMirage.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_5_502_146_ActiveX.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE... Read more

A:Windows Update Fails To Install Updates, NSIS Error, Can't Download

  
Quote: Originally Posted by atmywitsend


Very troubling experiences lately. Can't download any Windows Updates, and I get a NSIS Error when trying to download any kind of software from the internet, from valid sites like Kaspersky, Bit Defender, or gaming sofware from legit companies. McAfee fails to Update new virus definitions. I don't know what to do. This is a 7 month old laptop. Windows 7 64 Bit. Here's the Hijack This Log


Code:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:06:43 AM, on 2/1/2013
Platform: Unknown Windows (WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Application\iusb3mon.exe
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\HPOSD.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPMSGSVC.exe
C:\Program Files (x86)\CyberLink\PowerDVD10\PDVD10Serv.exe
C:\Program Files (x86)\CyberLink\Shared files\brs.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\CyberLink\YouCam\YCMMirage.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_5_502_146_ActiveX.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explo... Read more

Read other 5 answers
RELEVANCY SCORE 62.8

Hi there,

I'm having an issue with a laptop running Windows 7 Home x64 SP1. It has failed to install Windows Update Agent 7.6.7600.320 and keeps trying every time I try to run updates.

I've downloaded the installer and tried to run it manually, but that gives me the error 0x80070002

I've attached my CBS log from the last time I attempted the install. Any help will be much appreciated!

A:Windows Update Agent install fails, Error Code 800F081F

The v320 update installer isn't commonly available (unless you know where to look) - where did you attempt to download it from?

Here's the error-sequence from your log...

Code:
2014-09-10 23:15:06, Info CBS Exec: Staging Package: WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.256, Update: UI, PinDeployment: amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_pt-pt_76bae7f7dbc23d63
2014-09-10 23:15:06, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui
2014-09-10 23:15:06, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all missing files for package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10... Read more

Read other 4 answers
RELEVANCY SCORE 62.8

Hello. I have tried my best to do everything recommended here to solve the issue of failed installments of windows updates:

Fix: Windows Updates fail to install in Windows 7 | 8

Obviously, I haven't been successful. I am not very good with computers, so I would appreciate your patience as you help me with this problem.

Thank you for your help.

A:Windows Update Fails to Install: error codes 800B0100 and 9C47

Attachment 286200

Here is the CBS zip.

Read other 9 answers
RELEVANCY SCORE 62.8

I am working on a client's laptop, and have been unable to update to Service Pack 1. Stand-alone manual installer results in error 0x800f081e

I have also run the System Update Readiness Tool, and this is the most recent log:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2016-12-23 17:24

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages
(f) CBS Registry Error 0x80070002 Package_for_KB2695962_SP1~31bf3856ad364e35~amd64~~6.1.1.0 failed to get Visibility

Checking Component Store

Summary:
Seconds executed: 531
Found 1 errors
CBS Registry Error Total count: 1

Read other answers
RELEVANCY SCORE 62.8

Get Code 800B0100 Windows update encountered an unknown error
Found https://answers.microsoft.com/en-us/windows/forum/windows_7-update/failed-to-install-security-update-for-net/e2db6092-c870-e011-8dfc-68b599b31bf5?auth=1
Tried 
Method 1:
You may also try to download the standalone package from the below link and check if the issue persists.

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=025c5888-249a-4a5d-8776-af196f56b376
Only got the update is not for this computer. 

Looked at
Method 2:
You may also try to download the updates in clean boot state and check if that helps in resolving the issue.
Putting your system in clean boot state helps in identifying if any third party applications or startup items are causing the issue. If yes, you may have to contact the program manufacturer for any updates or uninstall and re-install the program.
 
Refer the following Microsoft KB article for more information on how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:
 
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135
Note:

After troubleshooting, make sure to put the computer to start as usual as mentioned in Step 7 in the above KB article
But none of the non-Microsoft could be disabled ex Symantec, Adobe Reader and flash. 
Tried Malwarebytes and it did not find anything. 

Read other answers
RELEVANCY SCORE 62.4

Today I checked for updates in Windows Update and I saw the KB976932 which is Service Pack 1. Clicked to install the updates, then after 2 hours the updates have finished to install and I got a message that some of them failed to install, especially KB976932 (Error Code 8007000E). Before installing this update i had this written in System window from Control Panel [attached image]. And this means that I had already installed SP1. Now this update doesn't show anymore in Windows Update. In the System window it is still written Service Pack 1, but on Installed Updates window there is no KB976932 update. Do I need to install it manually ?

A:Windows 7 KB976932 fails to install through Windows Update

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 4 answers
RELEVANCY SCORE 62.4

Good evening, it has been a while. I got a custom built computer about a year ago so that I can play FSX and P3D reasonably well. Everything seemed to go ok, not great, just ok. This are my specs:
Intel i7 [email protected] - Nvidia EVGA GTX 970 4gb - Asus Z97 Maximus Hero VII - WD black series 1TB HD - Corsair RM series RM850 - Samsung 840 EVO MZ-7TE500BW 500gb SSD.
About a month ago I started to notice that my wifi connection would be lost, then come back on its own. It got worse about two weeks ago, so I tried running the troubleshooter, it failed saying an error prevented it from running. Odd I thought.
I tried running windows updater, it downloaded a number of files to update, but continuosly failed to install 3 of them, apparently related to Microsoft Net Framework.
This morning I decided to uninstall P3D, and install a clean updated version, and the setup failed, never happened before. In the forums it adviced to make sure Direct X9 is installed, tried doing that and it failed as well.
This is very stressful, and affects my immune system, which is not good for me. Can someone here please be kind enough to take some time to help me solev this mess, thanks very much.
This are some logs from what happened today.
 

A:Windows update fails, Direct X fails, troubleshooter fails

im sorry to hear that you are having health issues sir. may i ask what OS yo are running
 

Read other 2 answers
RELEVANCY SCORE 62

Hi All,
A week ago we had tried to install ATA Gateway 1.8 on our server core Domain Controllers but it had failed. This bug was apparently fixed in 1.8 update 1 (listed
here)
However now when we install it on core the installer fails without erroring. I have looked into the ATA deployment log which has the following in it:
[6A6C:5944][2017-08-09T21:59:54]i000: 2017-08-09 20:59:54.1044 27244 5   Debug [\[]DeploymentModel[\]] [\[]DeploymentAction=Upgrade[\]]
[6A6C:5944][2017-08-09T21:59:54]i000: 2017-08-09 20:59:54.4013 27244 5   Error [\[]GatewayBootstrapperApplication[\]] Failed to create deployment manager [\[]exception=System.ArgumentNullException: Value cannot be null.
Parameter name: path1
   at System.IO.Path.Combine(String path1, String path2)
   at Microsoft.Tri.Gateway.Deployment.Bundle.UI.Application.GatewayUpgradeDeploymentConfiguration.GetMandatoryConfiguration(String installationPath)
   at Microsoft.Tri.Gateway.Deployment.Bundle.UI.Application.GatewayUpgradeDeploymentConfiguration..ctor(Engine engine, String installationPath)
   at Microsoft.Tri.Gateway.Deployment.Bundle.UI.Application.GatewayDeploymentModel.CreateDeploymentConfiguration(Engine engine)
   at Microsoft.Tri.Deployment.Bundle.UI.Application.DeploymentModel..ctor(BootstrapperApplication bootstrapperApplication, ProductComponent productComponent, String productFullShortName, String productFullLongName, String productFullLongDispl... Read more

Read other answers
RELEVANCY SCORE 59.6

Running Windows 7 Home Premium x64
Cannot update, attempting to upgrade to Win 7 professional. Discovered automatic updates were fried for some time and the system did not have SP1, which is apparently required for the upgrade.

I see similar threads, each seems to require advanced individual registry repair so starting my own - if there is a generic fix please reply with it and I can give it a shot. I have tried the normal tools to fix without change- see below.

Symptoms:
Windows updates fails with an error code 8007370B - Windows Update encountered an unknown error

I have run SURT several times successfully
I have run Fixit 50202, MicrosoftFixit.wu.LB.133286320513446086.5.1.Run,
Each returns 'Repair Windows Update components' and 'Windows Update components must be repaired'
All claim to have fixed the problem (no change, naturally)
Attempted to run SFC /scannow from an elevated prompt and it fails with 'Windows Resource Protection could not perform the requested operation'. Same behavior when attempted from Safe Boot.

Downloaded and attempted to install SP1 locally, both the all platforms version and the Win7 x64 version. Both fail with errors.

Ran the Norton remover tool and Macafee remover tool - think Norton came with the system but was never activated, ran the Macafee remover tool just to be sure.

Have renamed the Softwareupdate folder without any change.


Uploaded CBS logs
Download CBS.zip from Sendspace.com - send big files th... Read more

A:Win7 home update fails, error 8007370B - cannot update, install SP1.

See most of the repairs require the components file as well

Download COMPONENTS.zip from Sendspace.com - send big files the easy way

Read other 9 answers
RELEVANCY SCORE 59.2

Hello

I'm getting the following error/issues with my PC. Any immediate help would be greatly appreciated.
fyi ... I have attached the "minitools" output and mini "dmp". Thanks

1) All my windows - update fails (Config: xp Professional with Service Pack 3)

It says: A problem on your computer is preventing updates from being downloaded or installed

2) System restore fails,
It says : System Restore is not able to protect your computer. Please restart your computer

3) Takes directly to ===> Windows/System32/DRVSTORE in blue while system reboot

A:All windows update fails system restore fails, DRVSTORE in blue while reboot

Welcome aboard Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.====================================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next t... Read more

Read other 5 answers
RELEVANCY SCORE 58

Hi, I'm looking at a window 8.1 Sony PC , that has not been able to get an update for almost a year now
140 Updates available - and they fail within 30seconds with an errorcode800700C1 Looking into this error I ran the SFC \scannow and it failed unable to repair files 
 
I then looked that up and talked on chat to MS and was suggested to run 
DISM /Online /Cleanup-Image /RestoreHealth
 
which also failed with Error: 0x800f0906

 
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required t
o restore the feature. For more information on specifying a source location, see
 http://go.microsoft.com/fwlink/?LinkId=243077.

 
So i looked that up and found this article 
http://www.thewindowsclub.com/repair-corrupt-windows-image-error-0x800f0906
 
which I have also ran 
the CMD commands 
and the re-ran DISM again 
which resulted in the same error 
 
any suggestions please 
 
I have attached the SFC /scannow log for just (SR) 
and the DISM log 
 

A:Windows update not working - SFC fails and DISM fails

Edit:
 
 
 
Please run chkdsk /r, or chkdsk /f if you are using a SSD.
 
To run chkdsk /r in Windows 8/8.1 you will need to open the Elevated Command Prompt.  The easiest way to do this is to press the Windows key and the X key.   A menu will open with the option Command Prompt (Admin), click on this.
 
You will see a window similar to the one below.
 

 
When the Elevated Command Prompt opens copy and paste chkdsk /f in the Command Prompt, if this is a SSD you do not want to run the /r switch, you will want to use chkdsk /f then press Enter.
 
You will receieve the message "CHKDSK cannot be run because it is in use by another process.  Would you like to schedule this volume to be checked the next time the system restarts?  <Y/N>".
 
Type in Y and press Enter.
 
This will take a while to run, please be patient and allow it to complete the scan.  Do not stop this scan as this can damage your operating system.
 
When the scan is finished please download and run ListChkdskResult.
 
This will open Notepad with the results of the chkdsk scan.  Please copy and then paste this log in your topic.

Read other 12 answers
RELEVANCY SCORE 58

Hi,
I'm looking at a window 8.1 Sony PC , that has not been able to get an update for a year almost
140 Updates available - and they fail within 30seconds with an errorcode
800700C1

Looking into this Error I ran the SFC \scannow and it failed unable to repair files

I have attached the CBS (SR) log here

Any Advice welcom

Read other answers
RELEVANCY SCORE 58

Geez, it's one thing after the next installing or updating Lenovo Software any more.  First it was the Intel Proset 8265 WLAN driver yesterday, and now the latest is with System Update 5: I went to run the Lenovo System Update 5 program on my T470 today, and there was an update to the program itself, which ran but produced the error below, and then completely wiped the program from the laptop!  So I downloaded Lenovo System Update 5 manually from the support site, verified the checksum, ran it, and it produced the same error.  Then I tried installing it as Administrator, and once again the same error.  Retry does not work, and I am not going to corrupt my computer by hitting Ignore.  Now, I don't know if it is a catch-22, but there is a "Hotfix for Lenovo System Update" available, but it will not install, I imagine because the Lenovo System Update program itself must be installed first, which will not install, before applying the hotfix which will not install. 

Read other answers
RELEVANCY SCORE 58

To be honest, I just downloaded Windows Update Readiness Tool because my "Turn Windows Feature On or Off" shows up blank every time I open it just like the picture attached.

So, I researched that the way to fix it is by installing Windows Update Readiness Tool, and so, I did. But, when I try to install, it LITERALLY "fails" to do so (as seen on the other pic) . Can anyone help me resolve this problem? I want a concrete answer with steps for me to follow. I don't care however complicated those steps may be, as long as they definitely fix the issue.

Thanks to all who help

A:Windows Update Readiness Tool Literally "Fails" to install

Run sfc /scan now using option 2 in this tutorial: SFC /SCANNOW Command - System File Checker

Read other 1 answers
RELEVANCY SCORE 57.2

Hi.
An update fails to install.
It tells me this:

Code: 57A

"WindowsUpdate_0000057A" "WindowsUpdate_dt000"

It's an update for spamfilter for Microsoft Outlook.(I'm not even sure I have Outlook. -At least I don't use it.)
I would like to successfully install it, or at least get rid of it so it doesn't annoy me about a pending update.

Help appreciated. =)

A:Update fails to install

Which update (KB number) is this? If you don't have Outlook on your system, and this update pertains to it, then this might explain the failure.

You can hide this update http://www.sevenforums.com/windows-u...n-updates.html so that it doesn't bother you in the future.

Read other 3 answers