Over 1 million tech questions and answers.

X1 Yoga Onelink+ external monitors

Q: X1 Yoga Onelink+ external monitors

Hi.I'm using my X1 Yoga with a Onelink+ docking station and 2 external monitors on Display Port. The description of the docking station states that there can be up to 3 monitors including the system display. My X1 Yoga is always closed when I'm at home so that I'm just using the external monitors whereas 1 of them acts as the system display.In this case, could I attach a third external monitor to the VGA port of the docking station? Many thanks in advance.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: X1 Yoga Onelink+ external monitors

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 101.2

I'm unable to get my X1 Yoga to detect external monitors when plugged into the OneLink+ dock. This started occuring when my computer upgraded to the creators update. I thought I found a thread of others with the same issue (linked below), but it turns out I was waiting for a fix that didn't apply to me. I'm super frustrated right now. Stuff I've tried so far.1. Updated all drivers using Lenovo Service Bridge (even optional drivers)2. Installed the Fall Creators update preview (after being told it would fix the issue)3. Completely reinstalled Windows4. A Single VGA monitor5. A Single Display Port Monitor6. 6 different cables At this point I'm convinced there's an issue with the dock. There's a firmware update available for it, but you can't install it unless it is actively connected to a monitor (go figure).  When attempting to install, I get the code 255 "Can't connect to Synaptics VMMxxxx DP hub IC" If anyone has any sugestions, I'd greatly appreciate it. It used to work perfectly, then about the time I installed the creators update it started getting flaky, now I can't get it to work at all. Previous thread I was following. Note that I'm linking to a post where they show the dock working (annoying).https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Windows-10-creator-update-breaks-Lenovo-...

Read other answers
RELEVANCY SCORE 98

I have the exact same equipment at home and at work and yet the resolution on my second monitor at work will not go to the 3840 x 2160 that I have at home. Both locations have:1. X1 Yoga (first gen, model number 20FQ002YUS) -- It's the same laptop that I take between home and work2. ThinkPad OneLink+ Dock (model number DU9047S1)3. Two (2) Asus monitors (model number PB287Q) that go to 3840 x 2160 max resolution, connected to the OneLink+ Dock via DiplayPort cables I've been running this configuation with NO PROBLEM at home for the past 9 months.  So I recently purchased a new OneLink+ Dock and two new monitors for my work office and while one monitor will go to 3840 x 2160, the other will not go above 1920 x 1080, UNLESS, I use a mini DisplayPort cable from the second monitor directly into the X1 Yoga (bypassing the OneLink+ Dock) HERE'S WHAT'S BAFFLING: I assumed it was the dock and so I brought the one from home to work and found I had the SAME problem, suggesting it was the second monitor.   But I exchanged the second monitor for a new one and still have the same problem.  The docks are running the most current firmware. I'll send a gift card to your favorite coffee house if you can solve this mystery.  Thanks!

Read other answers
RELEVANCY SCORE 98

I have lenovo thinkpad x1 yoga.I have one connect +VGA and RJ45 adapter. i am trying to connect the 2 external display  apart from laptop screen here is my input:one external display is connected to onelink via VGA and another display connect via HDMI.but this dosen't work whenever i plug either onelink or hdmi one of the external monitor will be switched off. isn't it possible to use onelink and HDMI together.??I am stuck here. 

A:Lenovo Thinkpad X1 yoga 1st gen connect 2 external monitors apart from laptop display via onelink VG

Hi,
 
The way I read the X1YG1 base specs it supports two independent monitors.  Apologies, but I can't quite parse your post.  Does "apart from laptop screen" mean that you want 3 monitors total, or two and the laptops's display is off?
 
supports external digital monitor via HDMI or Mini DisplayPort;supports dual independent displays;
 
Z.

Read other 1 answers
RELEVANCY SCORE 81.6

I have a ThinkPad E550 laptop connected to two Acer V246HL monitors via a ThinkPad OneLink Pro dock. One monitor is connected via DVI/HDMI to the dock and the other connected either via VGA or DVI/HDMI directly into the laptop.  When both are connected via DVI/HDMI only one monitor will be detected. When one is connected via VGA both monitors are detected, however the one connected via VGA will flicker or blink off and on. Disconnecting the ThinkPad dock solves this issue. I have tried the following:Uninstalled and reinstalled graphics driversUpdated dock firmwareRun updates on graphics driversChecked different cablesChecked different monitorsChecked different dockChecked different laptopRun Lenovo VGA fix The Lenovo VGA fix would not complete and ended up in error loop. After advice from the internet I unplugged the dock and tried again, but failed. I then unplugged everything but the VGA cable and tried again, but failed. I unplugged all peripherals and tried again, but still failed. Errors include "Invalid AUX device" and"Enable Aux2 Reg Failed".Finally I redownloaded the fix, unblocked everything before unzipping then ran as Administrator, however it all still failed. Any other advice? I can run off battery for a while but not for a full working day.

Read other answers
RELEVANCY SCORE 80.8

Hello everybody,i am posting here because i really went through the whole www and still i have this issue, which is the following: My configuration is:X1 Carbon 3rd Gen (Windows 10 64bit)OneLink+ docking2 x ThinkVision P27q-10 monitors. The problem:When i connect both monitors to the dock, i get only one running / working.The only way I get both monitors working is if i connect the second one on my miniDP port directly on the laptop. And in this configuration i can have all three monitors working (laptop display + 2 external) Obviously i want to have them both connected on the docking station and use it properly. Thanks in advance for any solutions / suggestions. Dean

Read other answers
RELEVANCY SCORE 76.4

 Hello, I have an X1 Yoga OLED (20FQ) connected on OneLink+ and after 10 days of normal use I lost connection to both DP displays. I was running a 3 display configuation with two 1920x1080 on DP and 2560x1440 on BuiltIn Display. I have done all the updates, and I still don't get anything. The only thing I am not sure I have updated properly is the firmware of onelink+. I downloaded the firmware from here https://support.lenovo.com/cy/en/documents/acc100252 and when I execute it doesn't do much. I tried on cmd as an administrator, still nothing. Do I need some .net libraries or something?  HDMI (from Laptop ) to DVI works.MiniDP (from Laptop) to HDMI from there HDMI to DVI works. DP (Onelink+) does not workVGA (Onelink+) does not work Any help would be appreciated. Thanks,csco

Read other answers
RELEVANCY SCORE 74.8

My X1 Yoga 1st Gen runs Windows 10, i wanted to connect 3 external monitors through OneLink+ dock( It has 2 DP and 1 VGA output ports) but for some reason only 2 monitors get connected and working but not the 3rd one, i tried connecting the 3rd monitor directly to the laptop through HDMI it didnt work either, do i need to do something to make all 3 monitors to work?

Read other answers
RELEVANCY SCORE 73.2

I have owned my Yoga S1 for several years now and apart from the endless early issues the docks (and many replacements), the stupid placing of the Ctrl key (still annoys me) and a problem i had with a repair (which to be fair was handled very well in the end - customer service was great) I've been happy.Except one things - power management.This morning, I came to my Yoga and the red light was glowing on the i in thinkpad, key board locks were on: touch keys (on most of my other computers pressing space a few times wakes from sleep state), nothing, press power button nothing, press button on dock - nothing., tried restart button on the dock - still nothing.So I do what, now that I think about it, I do about 75% of the time when returning to my yoga - hold the power button for 9 seconds and force a BIOS crash reset. I have applied all the drivers religiously over the years, BIOS updates Windows in up to date (Creator edition now) fully patched. I have tried the confusing variety of Lenovo bits that seem to part duplicate and part confuse existing Windows functionality. So, and with respect, please don't post "have you tried applying" ... unless you happen to know that this is specific fix for something - I reckon I have been through the random try everything approach. What I'd like is: 1) to be able to work at my desk - touch something to say "I am away" and have power saved my two external monitors switch off but for the machine to go back to where I was when I ... Read more

Read other answers
RELEVANCY SCORE 73.2

I have owned my Yoga S1 for several years now and apart from the endless early issues the docks (and many replacements), the stupid placing of the Ctrl key (still annoys me) and a problem i had with a repair (which to be fair was handled very well in the end - customer service was great) I've been happy.Except one things - power management.This morning, I came to my Yoga and the red light was glowing on the i in thinkpad, key board locks were on: touch keys (on most of my other computers pressing space a few times wakes from sleep state), nothing, press power button nothing, press button on dock - nothing., tried restart button on the dock - still nothing.So I do what, now that I think about it, I do about 75% of the time when returning to my yoga - hold the power button for 9 seconds and force a BIOS crash reset. I have applied all the drivers religiously over the years, BIOS updates Windows in up to date (Creator edition now) fully patched. I have tried the confusing variety of Lenovo bits that seem to part duplicate and part confuse existing Windows functionality. So, and with respect, please don't post "have you tried applying" ... unless you happen to know that this is specific fix for something - I reckon I have been through the random try everything approach. What I'd like is: 1) to be able to work at my desk - touch something to say "I am away" and have power saved my two external monitors switch off but for the machine to go back to where I was when I ... Read more

Read other answers
RELEVANCY SCORE 67.2

Hi, I'd like to add a couple of external monitors to my Yoga 2 Pro, specifically the Dell u2515h model. This has dvi and hdmi in and displays at 2560x1440. Will the micro hdmi drive 2560x1440? How would I get the second external monitor connected? I've seen some usb3 - hdmi connectors but most seem to top out at 1920x1080.  How do do I get this to work without spending a fortune on connectors- I'd rather spend the money on getting a better set of monitors.  Should i I give up on the idea of dual 2560x1440? Should I go for two u2414h monitors, which would give 1920x1080 on each screen?  Thanks, Ian Brown 

A:Yoga 2 Pro, external monitors

AFAIK the Yoga 2 Pro's built-in HDMI is version 1.4, which should be able to output 2560x1440 at 60Hz.As for a second monitor, you can look into a USB 3 to HDMI DisplayLink solution. Some of these support up to 4K. The biggest caveat with a USB solution is that the CPU will be under a fair amount of strain as it must handle the encoding of the video stream. This also means that while you can probably output 60Hz office and productivity work over the USB, any fullscreen games/videos will be very choppy.

Read other 1 answers
RELEVANCY SCORE 66.4

I have had some trouble connecting two external monitors for my Lenovo Yoga 710. Does anyone have any idea how to do this? There is only one MINI HDMI port and two USB ports (these don't appear to support an external monitor tho)

Read other answers
RELEVANCY SCORE 66.4

I have it connected to two external monitors via USB-C and DELL WD15 dock. Laptop screen is ON as well, so I have all 3 screens in extended mode.The problem is it runs very slow, websites open slowly and simple youtube video takes up to 50% of CPU... I have enabled "Show kernel times" and looks like most of CPU time is taken by kernel on all 4 logical cores.The laptop is running Windows 10 Pro with 16GB of RAM, 512GB SSD, i5-7300U CPU. How do I debug this?

Read other answers
RELEVANCY SCORE 66.4

I have it connected to two external monitors via USB-C and DELL WD15 dock. Laptop screen is ON as well, so I have all 3 screens in extended mode.The problem is it runs very slow, websites open slowly and simple youtube video takes up to 50% of CPU... I have enabled "Show kernel times" and looks like most of CPU time is taken by kernel on all 4 logical cores.The laptop is running Windows 10 Pro with 16GB of RAM, 512GB SSD, i5-7300U CPU. How do I debug this?

Read other answers
RELEVANCY SCORE 66.4

I bought myself a Yoga 920 for my Christmas B'day and love it so far. Now I want to buy it things. I am a retired engineer, but all this new-fangled tech jargon has got me off kilter. I've been reading a lot of confusing things so I thought you guys might help me out if I ask nice. Pretty please. I want to buy my new baby a 27-inch external monitor:1) Does the 920 accept an external monitor's touch input? That would be too cool to hope for.2) Is there an external USB3 dock for the 920 hookup? Or does one have to wing it with an HDMI cable?3) What is this auto connect feature for external monitors that Win10 mentions? Does the Yoga have it and is it now standard on most modern monitors? Thank you for any info you got.

Read other answers
RELEVANCY SCORE 66

Hi all, I have a Yoga 260 and two external monitors.  It does not seem to matter how I connect them, USB, HDMI, whatever the thing with a square on one end and USB on the other, directly or through a splicer I can not get the Yoga to recognize the third screen individually (yoga has one monitor, plus 2 external monitors = 3). I go to display settings but it just will not recognize the third monitor at all unless I use HDMI out of the laptop in to a splicer then 2 HDMIs out and in that case I only get duplicates on the two external screens. Any suggestions about the best way to set up... as in "it worked for me when I connected USB to one monitor, then daisy chained that to a second one" or "it worked for me when I HDMI to one screen and USB to a second" etc... Thank you

Read other answers
RELEVANCY SCORE 66

What resolutions and refresh rates are supported for external monitors (HDMI) on the Lenovo Yoga 2 Pro i7 (59428032) Specifically, I'm looking at the Samsung 28" 4K Ultra HD Widescreen Monitor (U28D590D) [3840 x 2160] I've hooked up to my HP w2408h monitor (1920x1200) with mixed results (mostly unacceptable).  Most items (icons, images) appear quite large and cropped.  For some applications (such as the View/trim preview window in GoPro Studio) appear to be cropped to about 1/4 of the image (if you imagine an image split into 4 quadrents, only the top left is visible). I had hoped that I could use the Lenovo Yoga 2 Pro both as an extremely portable notebook and a desktop (when connected to an external monitor, keyboard & mouse).  I'm beginning to doubt that this will work. 











Solved!
Go to Solution.

A:Supported external monitors on Lenovo Yoga 2 Pro

While i can't offer any insight on a 4K monitor as i dont have one myself, I can tell you that is works perfectly on a 25" monitor at 1920x1080, and everything looks perfect, exactly as it is when connected to my desktop. I'd suggest that after connecting the external monitor you enter the resolution settings, make sure the second monitor is set as 'Extended monitor' and that the resolution for it is set to its native resolution. Aside from that, if you're working with the Yoga's native resolution (3200x1800), then you probably have the DPI set to 200%, which will also affect external monitors, making some things look pretty bad. There is no magic solution for this case, either drop the resolution and lower the DPI, or.... as much as i hate to say it... get used to it... sorry. I personally dropped the resolution on my yoga and lowered the DPI, so i'm good both with the yoga screen and my external monitor when at home.

Read other 7 answers
RELEVANCY SCORE 66

My Yoga 710 laptop puts my external monitors to sleep once I connect them with a cable and adapter.  Each external monitor I have tried recognizes they are being plugged into a computer, because its display window will change from "no cable/computer detected" to "monitor is going to sleep".  The laptop, however, stopped recognizing that it is being plugged into an external monitor.  In addition to trying different monitors, two different microHDMI adapters, and three different cables.  I have worked with Microsoft, Lenovo, and Geek Squad to update the drivers and replace the motherboard.  Is anyone else experiencing this? Any suggestions?  This error began soon after I updated the laptop's drivers for a problem it had communicating with my wireless printer.  

Read other answers
RELEVANCY SCORE 66

My work purchased a Yoga 900-13ISK and two external monitors with HDMI and the traditional VGA inputs. I would like to connect the machine so I can run two external monitors simultaneously when I'm working from home. The best solution I have found is the type c adapter which will allow my to run one external monitor only. Does anyone have any guidance for setting up the machine to run two external monitors simultaneously? Thanks!

A:Yoga 900 - setting up dual external monitors?

Upon reading articles online about the Yoga 900, it does support dual monitors (HDMI or Display port), but you'll need a USB-C adapter. Does your USB C adapter have two display options on it?




I'm a Lenovo advocate, part of the Lenovo INsiders program. I'm a volunteer; I don't work for Lenovo.

Read other 9 answers
RELEVANCY SCORE 65.2

My Yoga 11e will suddenly not connect to any monitors (including the one it's been connected to for a year). The display settings consistently show "Didn't detect another display".YES I HAVE ALREADY GONE THOUGH ALL THE SIMILAR POSTS ON THE FORUM. * Yes, I have already tested the monitors and cables to verify they work.* Yes, I have already tested it with different monitors.* Yes, I have updated all my drivers.* Yes, I have used the Lenovo update software.* Yes, I have already removed the graphics driver and reinstalled it.* Yes, I have already done Windows troubleshooting - including reinstalling Windows. Based on the Lenovo website, there seems to be no way to actually speak to any sort of tech support, so I'm stuck resorting to this. Is there anything else I can try BESIDES THE ABOVE that might work, or should I just chuck this computer in the garbage?

Read other answers
RELEVANCY SCORE 64.4

I have a ThinkPad S1 yoga bought in Dec 2013. I have being using the mini hdmi to work of 1 external 1080p monitor these last few years and it has worked fine. I now want to add a new second 1440 x 2560 along side my 1080 x 1920 monitor for a dual monitor set up. (Mostly for spreadsheets, emails, web browsing etc.) I do not mind if one of these duplicates my laptop screen. I was going to get the onelink dock to enable me to do this however I am not sure if it will work. I know the resolution with dual monitors running off the dock is limited at 1200p. What I now want to do is use the mini hdmi on my laptop for one monitor and the onelink dock for the other, however I want to be sure it will work before I go and buy the monitor and dock. Alternatively I could buy an USB 3.0 to hdmi adapted to run the 1080 monitor and a usb hub for the extra usb's I will need. (I think the dock will use less processing power and would be a slicker set up so I imagine it would be better?) You?re  help would be appreciated as I have read there can be issues trying to get higher resolution monitors to work. 

Read other answers
RELEVANCY SCORE 64.4

How do I get two external monitors to work with my new Yoga 730 15 inch? I have a USB-C to Hdmi but I cannot use it and the HDMI port because all three screens will not show up, only two. Only two monitors will show at one time. What can I do to get these to work?  Is there a docking station I can purchase? I have the Lenovo part GX90M44577 that is the USB-C to HDMI port.  

Read other answers
RELEVANCY SCORE 64.4

Hello all, As the Yoga 720 15'' has only one Thunderbolt port, with no other ports for connecting more displays, I'm looking for a solution for connecting two monitors through this single port. The problem is that the Thunderbolt 3 to dual DisplayPort adapters do not seem to be working on this laptop for some reason according to threads on this forum. (although it has the appropriate hardware I suppose?)I saw a solution using the Lenovo Thunderbolt Dock, but it's quite expensive... I thought to myself: suppose I have two monitors that supported DisplayPort daisy chaining, could I use this ability and connect them to the laptop? Connecting one monitor directly to the laptop, and then connecting the other monitor to the first one using daisy chaining. Like so:Yoga -> Thunderbolt to DispalyPort adapter -> Monitor 1 -> DisplayPort -> Monitor 2.  I couldn't find any info about this method (only that it is possible on the XPS 15 which also has Thunderbot with two lanes only...)  Have someone already tried this method? Or could try it? (pretty please... )Or could at least tell me if it is possible? I'm really looking forward to buying this laptop and this is the main reason that stops me...  Note: I am aware about the bandwith limitations. I plan to use only two 2K displays. Thank you!

Read other answers
RELEVANCY SCORE 63.6

Connected an IOGear compact dock to the laptop's USB C. Connected monitor #1 to the dock's HDMI port.Connected an HDMI cable to monitor #2 and used an HDMI to mini display port adapter to connect to the docks mini diplay port.I used the "Extend Display" setting on the laptop.I can only get display on the laptop monitor and one of the external monitors.  I can't get the display to work on both external monitors.  Second external monitor is not detected.  Help please. I am told that a plugable usb type c docking station would work, it has two "Disply ++ Ports".  Suggestion is to use an HDMI to DP++ cable to connect to the dual external monitors. Haven't tried it yet, does anyone know whether that'll work?

A:Need help connecting Yoga 910 13IKB with 1 USB C & 1 USB 3.0 port to dual external HDMI monitors

Easier still is to just use an HDMI splitter.

Read other 1 answers
RELEVANCY SCORE 63.6

I would like to connect my ThinkPad X1 Yoga 1st Gen, running Windows 10 to 2 external AOC E2752VH monitors to extend my desktop over the 2 monitors.  Is it possible to use a 1 HDMI to 2 HDMI splitter to connect them?  Or is it better/possible to use a 1 mini DisplayPort to 2 HDMI splitter?

Read other answers
RELEVANCY SCORE 62.4

Over the last few months I've had around 7 different occurances of a monitor not displaying anything while powered on and hooked up. This has happened with multiple makes and models of monitors and also laptops, even the connections are different in some cases whether it be VGA, VGA to Mini display, HDMI, or HDMI to Mini display. The only similarity of all the occurances is 2 monitors were used while this happened. Each time I've replaced all the adapters and cords to see if that would fix it. The only thing that seems to fix it, is to switch the monitor out with another one. This happened after the founders update for Windows. All PC's are using Windows 10 64 bit. Any help would be appriciated on this! 

Read other answers
RELEVANCY SCORE 62

Hello everyone. I have an X1 Carbon 2nd generation, and two lenovo monitors with a OneLink Pro Docking station.  Docking station has 1 DVI and 1 DP.Monitors have 1 HDMI, 1 DP, 1 VGA (for each) First Monitor connected with DP-adapted-DVI to the docking station.Second Monitor connected with DP port to the docking station.  I connected my closed laptop to the docking station,  and just first monitor works.  What should I do to use my other monitor too? Thank you so much. 













Solved!

Go to Solution.

A:ThinkPad OneLink Pro Dock multiple Monitors

Sorry. Problem solved! The DVI - DP adapter changed with a DVI - HDMI adapter. Now it works fine, just need some minutes after first connection.  Thanks.

Read other 1 answers
RELEVANCY SCORE 59.2

Hi, Everyone. Got me a nice little x270 to replace my old x201.  Happy enough with the machine, but getting it connected to my accessories (monitor, keyb, mouse, ethernet) is a bit of a chore. This machine appears to have a "proper" dock port on the bottom.  Is there a compatible ultradock available for the model 20HN x270?  By proper - I mean, Not USB.  A nice dock I can simply drop the machine into when I'm at the home office.. Thanks!

Read other answers
RELEVANCY SCORE 59.2

I have read a lot and tried updating the firmware - nothing works.When I put the laptop in the docking station - it does not recognize the monitar and also says AC power is not connected when it is. Help appreciated!

Read other answers
RELEVANCY SCORE 58

We got about 5 Yoga 460s brand new with OneLink+ dock systems.  All of them have been updated with their respective updates in regards to BIOS, Firmware for Dock and Network drivers.  We are having a problem with ethernet adapter (when docked) dropping connections for about 1 second (causing Windows Explorer to say we disconnected from network drives). I can't see any "icons" drop (for network connectivity in notification center of the bottom right).  All are running Windows 10 with latest updates.  Pressing "ok" reconnects instantly but this is becoming a very annoying problem with people have to do this 6 times a day.   Lenovo machines plugged up before these docks and Yogas (T540s and T460s) in their own respective docks didn't have one issue.  Nothing on the network switch is indicating a dropped connection (managed switch put into logging mode).  We have turned off all power management of the network driver (allowed to sleep and "green" switching) to no avail.  This seems like a USB3.0 problem and we can't seem to figure it out.  Even without ANY external displays attached we get disconnects about 6 times a day (in 8 hour work day). 

A:Yoga 460 with OneLink+ Dock

Nobody? Not even OneLink+ issues?

Read other 1 answers
RELEVANCY SCORE 58

Does anyone know if itis possible to do the following:When connected to the Onelink dock, closing the lid will NOT turn off/standby laptop. I know there is the option on the power settings to choose not to do anything when the lid is closed, but that is not so ideal when we have the laptop connected to the wall and not the dock... So the idea is if it is possible to make it ignore closing the lid only if the dock is connected, Thank you. Ricardo Santos.

Read other answers
RELEVANCY SCORE 58

We got about 5 Yoga 460s brand new with OneLink+ dock systems.  All of them have been updated with their respective updates in regards to BIOS, Firmware for Dock and Network drivers.  We are having a problem with ethernet adapter (when docked) dropping connections for about 1 second (causing Windows Explorer to say we disconnected from network drives). I can't see any "icons" drop (for network connectivity in notification center of the bottom right).  All are running Windows 10 with latest updates.  Pressing "ok" reconnects instantly but this is becoming a very annoying problem with people have to do this 6 times a day.   Lenovo machines plugged up before these docks and Yogas (T540s and T460s) in their own respective docks didn't have one issue.  Nothing on the network switch is indicating a dropped connection (managed switch put into logging mode).  We have turned off all power management of the network driver (allowed to sleep and "green" switching) to no avail.  This seems like a USB3.0 problem and we can't seem to figure it out.  Even without ANY external displays attached we get disconnects about 6 times a day (in 8 hour work day). 

Read other answers
RELEVANCY SCORE 58

I have Thinkpad Yoga 460(20EL). I bought OneLink docking station model DU9026S1 however I could not use it as the connecter is bigger (or different) from the slot in the laptop. Searched a lot but could not understand why this happened. Any help to propose the suitable docking or if there is a an adaptor?

A:Yoga 460 with OneLink+ Dock

Hi SeniorJ,Warm Greetings & welcome to Lenovo Community, happy to have you here.As I understand that you have query regarding Docking station for Yoga 460 20EL
The dock which you have bought is ThinkPad OneLink Dock which is not compatible with your system
 
SeniorJ wrote:
I have Thinkpad Yoga 460(20EL). I bought OneLink docking station model DU9026S1 however I could not use it as the connecter is bigger (or different) from the slot in the laptop. Searched a lot but could not understand why this happened. Any help to propose the suitable docking or if there is a an adaptor?

Unfortunately, your system has OneLink+ dock connector and the dock which you have to use is ThinkPad OneLink+ Dock (40A40090SA)
And there is no such Adapter/cable to convert OneLink+dock - OneLink Dock.
 
I hope the above information helped you.
Please feel free to post in Lenovo Community Forums if you have any further queries!
 
Regards,Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 1 answers
RELEVANCY SCORE 57.6

I just bought a ThinkPad OneLink+ Dock for my Lenovo X1 Yoga 2nd Gen laptop. I used the product guide to find it.
Unfortunately, the connector is not compatible to my 2nd gen X1.
Is there a converter og can I connect via the USB?

A:X1 Yoga 2nd Gen and OneLink+ Dock: USB converter?

Hi YogaCaveBear, and welcome to the Lenovo User Community!
 
Please provide a link to the product guide which said the OneLink+ Dock is compatible with the X1 Yoga 2nd Gen, so we can get it fixed! As you have found it is NOT compatible, and there is no USB converter .
 
The most complete reference to compatibility of all accessories is the Options Compatibility Matrix. You can use a USB dock or a Thunderbolt dock - the Lenovo Quick Pick site also shows your options.

Read other 1 answers
RELEVANCY SCORE 57.6

Hi, I have a Yoga 12 and want to buy a Yoga 460. I want to buy a docking station that works for both models, but the 12 and 460 have different connectors (pro and +). Will the 12 work with a OneLink+ docking station if a buy a "ThinkPad OneLink-to-OneLink+ Cable" (#4X90J40422)? Or is there a better solution? ...perhaps a docking station with both connectors? /Christian

Read other answers
RELEVANCY SCORE 57.6

I have a 20FQ Lenovo ThinkPad X1 Yoga, which doesn't reboot if the OneLink is connected. This was not a problem before my lenovo update from around 3 weeks ago, but came after my Laptop was upgraded to Bios version 1.25. I have also tried install version 1.26 for the 20FQ, but no help. Have also updated/installed the OneLink+ software to 1.10.16 I select Reboot and it is stuck in the red Lenovo splash. If I take out the OneLink cable, it will resume rebooting, and I can insert the cable again. I am not sure which Bios the laptop had prior to upgrading to version 1.25.  

Read other answers
RELEVANCY SCORE 57.6

I recently bought a X1 Yoga as a personal laptop to compliment my Gen 3 X1 Carbon. I istakenly thought the onelink dock would be indentical, only to find they use different ports. From what I can tell, Lenovo does not sell a converter cord. Has anyone run into this issue? Am I stuck having two docks on my desk or should I just convert to a generic USB doc (non-Lenovo)?

Read other answers
RELEVANCY SCORE 57.6

Good Morning, I have a strage problem:When the power adapter is plugged in, the indicator light is orange. The Windows battery symbol in the task bar is animated as charging. When I hover the mouse over it, it says "charging". The Problem is: It isn't charging at all.Now the strage part: If I plug the same cable into my OneLink+ adapter and connect the OneLink with my computer it is actually charging.The problem could be caused by the ThinkPad BIOS Update - 7 (V.1.21.1.14) I did a few days ago. I'm not sure though and I have no idea how to undo the update. Configuration:ThinkPad X1 Yoga Type 20FQ, 20FR.Windows 10 Pro (newest version (KB3206632))Ask me, if you need more info.Odiously neither the power adapter nor the battery are causing the problem.  Kind regards B.

Read other answers
RELEVANCY SCORE 57.6

When I am at work I plug my Thinkpad Yoga into the Onelink Pro to connect all the peripherals, inlcuding mouse, keyboard, printer, and two monitors. The Onelink Pro also has my ethernet connection to the office network. I have had this setup for 2 1/2 years and it has always worked great. This morning, however, when I connected to the Onelink everything worked normally except the ethernet network connection. I could not connect to my office network, and I got messages like "Cannot find a valid network"; so I ran the Lenovo diagnostics. It told me there was an invalid IP configuration. I have unplugged and reset both the Onelink and the computer; but nothing had fixed the problem. I have also checked for the latest drivers, and everything seems to be up to date. Does anyone have any suggestions to get me reconnected to my ethernet network, or is my Onelink starting to go bad? 

Read other answers
RELEVANCY SCORE 57.6

Good Morning, I have a strage problem:When the power adapter is plugged in, the indicator light is orange. The Windows battery symbol in the task bar is animated as charging. When I hover the mouse over it, it says "charging". The Problem is: It isn't charging at all.Now the strage part: If I plug the same cable into my OneLink+ adapter and connect the OneLink with my computer it is actually charging.The problem could be caused by the ThinkPad BIOS Update - 7 (V.1.21.1.14) I did a few days ago. I'm not sure though and I have no idea how to undo the update. Configuration:ThinkPad X1 Yoga Type 20FQ, 20FR.Windows 10 Pro (newest version (KB3206632))Ask me, if you need more info.Odiously neither the power adapter nor the battery are causing the problem.  Kind regards B.

Read other answers