Over 1 million tech questions and answers.

How to (McAfee configuration question)

Q: How to (McAfee configuration question)

Can McAfee Virusscan enterprise 8.7i schedule a scan without ePolicy Orchestrator?
I finally got it the way I want it except the virusscan console Full Scan and on-demand
scan properties have the schedule button grayed-out. I only see Administrator from the
Windows XP w/ sp3 login screen in safe mode and it has no password. I didn't get ePolicy
Orchestrator with my McAfee install and there is no Hub or Server here so I guess I am
the Administrator. I set up this machine and gave the user I set it up with administrator
privileges, This is XP Home so I have no users and groups button in my Manage MSC.
Am I out of luck, or will I just have to either get ePolicy Orchestrator or run on-demand
scans manually, when I am about to be away from the machine? Thx paj692

RELEVANCY SCORE 200
Preferred Solution: How to (McAfee configuration question)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: How to (McAfee configuration question)

I installed McAfee Enterprise 8.7i on my XP Pro (w/ SP3) and ran the setup using "Run
as" Administrator. I had to set up a password for the Administrator account so the
program would run, but with XP Pro, that is no problem. The schedule button is not greyed
out like it is on the XP Home (w/ sp3) system using the exact same installer. I did not
install it using "Run As" the Administrator Account. I'd like to, but the problem is this; I
can't run the installer from safe mode since the installer service is not running and I get
this error when trying to run in regular mode (Run As Administrator). Unable to log on:
Logon failure: user account restriction. Possible reasons are blank password (That's not
it!), logon hour restrictions, (probably not it) or policy restriction has been enforced. Any
body know a work around for this. It would be good to know how to run something in XP
Home as the Administrator without having to go into safe mode. paj692

Read other 1 answers
RELEVANCY SCORE 52.4

I need to set up three user accounts on two computers the accounts on each computer is going to be monitored.
Each user will be assigned access for certain folder or files and certain applications, like internet explorer.
And all usb ports and dvd drive will be blocked. Only the admin will be allow to have full access.

So i need to do something that allow ( managers) to monitor employees activity on the system during working hours.

On one pc is windows xp pro on the other os windows 7 home premium.

Any idea how i can acomplish this task?

I.was thinking of group policy on both computers but on home premium there is not group policy.

Also the users will be using almost all the same programs and files just the with different information.

Thank you in advance.

A:group policy configuration and computer configuration question

Read this
But for Windows 7 Home Premium you will not have the
Local Security Policy so you may need to upgrade to Windows 7 Pro for that.

This is easier to control with a server like Windows Server 2003 or 2008.

Read other 2 answers
RELEVANCY SCORE 52

Yesterday, I was browsing the Internet and the the red square brackets went around the McAfee tray icon. The programs logged were two that I commonly used, and had no problems before at all, but would have been blocked if Access Protection was enabled. Since there was a huge list of the two entries (McAfee kept reporting them every other second or so it seemed like), I enabled the block. I changed some settings in the Access Protection log, but now it's just giving me more logs & slowing down *everything* on the computer, especially startup and Explorer; programs I open are unresponsive for a couple of seconds, then restore themselves. Also, McAfee likes to randomly disable itself out of the blue, so I have to a. reenable it myself, b. Windows Security pops up and says it's disabled, and I enable it from there, or c. the option to enable/disable is whited out, but it restores itself after a while. Is this just a McAfee bug or should I be worried about it?

The logs have gotten to a point where everything from yesterday was wiped out because the file didn't have enough space for them...

Is there an optimal configuration for VirusScan Access Protection, or at least a way to reset it to the default? I don't remember which ones I changed, and don't want the ones that are supposed to be left there changed...

Also ran a Malwarebytes scan, came up clean.

Edit: I think it's stemming from "Anti-virus Maximum Protection:Protect cached files from password and email address s... Read more

Read other answers
RELEVANCY SCORE 44

I have McAfee AV on my win98 SE computer which I bought in 2000 but I've never updated it. My question is will it still block viruses from attacking my computer or serve any purpose at all? If not, should I just remove the program from my computer? Thanks for help.
 

A:McAfee AV Question

Read other 6 answers
RELEVANCY SCORE 44

I have McAfee Virus Scan loaded on my Dell computer and routinely receive automatic DAT updates each Wednesday. Have never had a problem, until today. I log into my Windows XP account and the McAfee Security Center icon appears in my system tray, as usual, and my antivirus works as normal. However, when my son or my wife logged into their respective accounts, today, a message now appears on the desktop "some components of McAfee Security Center are either missing or may not have been installed properly." I have uninstalled the McAfee components and reinstalled from the McAfee web site. My log in is fine but their problem still exists (they have no antivirus protection). I installed from my account. I tried the install from my son's account, but had an error with the Active X control. Each of our Internet Explorer security settings are the same. I have sent e-mail to McAfee but am not holding my breath. Has anyone ran into this problem lately? Would greatly appreciate any suggestions..
Thanks...Cranberry
 

Read other answers
RELEVANCY SCORE 44

My husband's Dell laptop will be 1 year old this week. It came with McAfee Live Safe which is expiring and I have found that you can buy the program outright cheaper than renewing. But, I have tried to compare McAfee Live Safe to McAfee Total Security and I'm confused. I don't see much difference, and I'm not sure my husband used all the features that came with the Live Safe, so I'm thinking the Total Security might be an overkill. Both programs seem to be available for close to the same prices. Is there a benefit for the Total Security that I'm not seeing?

Better yet - do you think McAfee is a good product at all - or should I be looking at some other security/antivirus program. We also use Malwarebytes and have for years. I certainly don't want anything that will conflict with that - since we've been very happy with it for a long time.

THANKS as always for your input.

Read other answers
RELEVANCY SCORE 43.6

I just bought a 2GB DDR2-667 for my laptop. I originally had two 1GB DDR2-533. My question is this, should I go for the faster 2GB or slower 3GB option?
Note: FSB speed is 667 MHz.

Benchmarking tools gave me inconclusive results. Any one can suggest a good memory benchmark? Anyways the comparison I got was using Everest.
 

A:RAM configuration question

Read other 13 answers
RELEVANCY SCORE 43.6

Hi guys, some quick questions about LAN IP configuration:

I have a DSL modem has an ethernet port, and a USB port, to allow for a second computer to connect to the internet. However, I have a netgear 4 port switch LAN/WLAN router, of which I connect one desktop computer to the ethernet port, my laptop using the WLAN, and one computer connected using USB (through modem, not router). Thus, the last computer has a different IP address (assigned by DSL company). My other two computers have IPs assigned by the router, thus, are able to share through Itunes...

...Which leads me to the question: is it possible to configure the ip of my modem-assigned computer to match those of my router's, or vice versa, as I want to allow my Itunes music to be accessible on all three computers. Thanks in advance, and happy thanksgiving.

p.s. I know you're wondering: but you have three more switches on the router, why not use it..well, this last one doesn't have LAN card.
 

A:ip configuration question

What you should of done is connect all the comptuers to the LAN ports on the router (except the laptop) and share internet connection that way. As far as iTune, you might need to open up the port in the firewall software on your router (check the manual for more details).

Q: "is it possible to configure the ip of my modem-assigned computer to match those of my router's, or vice versa?"
A: No

Network cards are very cheap now, you should use that. Much faster than USB.
 

Read other 1 answers
RELEVANCY SCORE 43.6

This should be simple, but I cannot find details on whether or not this is possible.   What I want (end-state) is a P51 with the 256Gb SSD as the boot drive and the 500Gb spinning drive as the data drive. When I look at the ordering page, I can get both those drives, but there is no way to specify the SSD as the boot drive.  Alternatives are:1. Buy the P51 with just the 500Gb non-SSD, install something like a Samsung 960 EVO 250GB NVMe SSD myself, migrate/reinstall Win10 from the non-SSD to the SSD, and tell the BIOS that the SSD is now the boot drive.Pro - cheaper.Con - more effort and there's always hiccups finding the right drivers.Assumption - the P51 supports the Samsung 960 EVO 250GB NVMe SSD as a boot drive.2. Buy the P51 with just the 256Gb SSD (so it's automatically the boot drive), then buy another 2.5" SSD or non-SSD drive (and the associated caddy kit from Lenovo) and install that.Pro - no reinstall issues.Con - More expensive since I need to buy the larger data drive ($80-$100 and it's free in option 1), plus the Lenovo SSD is about $90 more than option 1. So, can I specify the SSD as the boot drive if I order the P51 with two drives, or do I have to go to alternative 1 or 2? If so, which one is generally recommended? Have I missed something critical? Thanks, ~rick

Read other answers
RELEVANCY SCORE 43.6

I have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)

A:GPT configuration question

No - this partition is only to ensure partitions are properly aligned (especially for ssds).

There is something wrong with your image backup.

Do you have more than one hard drive installed?

Read other 0 answers
RELEVANCY SCORE 43.6

I think this is a dumb question but is there any reason my Gigabyte MA790X-UD4P MBO will work at 32 bit but not at 64 bit? If I configure at 32 bit it works fine but when I go to 64 bit it gives me all kinds of strange problems. My OS is Win 7 Home Premium. I want to use 64 bit because I have 8GB of memory. I've tried this several times and can't make it work successfully.

A:MBO configuration question.

Well, it could depend on exactly what "strange problems" occur, so lets start there. Can you give a list of what issues you are having when you try to run Windows 7 64-bit.

Read other 5 answers
RELEVANCY SCORE 43.6

it happens sometimes rhat when I want to install a new program that mcafee notifies me that it is PUP potentially unwanted problem > my question is does this message necessarily mean it is a spyware or such of the kind or it is just so because mcafee doesnt recognize it . thank you in advance for your anticipated help

A:A Question About Mcafee Notification

Potentially unwanted does not necessarily mean the file is malware or a bad program. It means it has the potential for being misused by others.For example: Potentially unwanted tool:Application/Processor Not disinfected C:\Documents and Settings\Drew\Desktop\SmitfraudFix\Process.exeprocess.exe is part of the smitfruad fix tool and detected by some antivirus programs as a "RiskTool", "Hacking tool, or "Potentially unwanted"; it is not a virus, but a program used to stop system processes. Anti-virus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.

Read other 1 answers
RELEVANCY SCORE 43.6

Hello, again! I noticed last night that a McAfee shortcut was on my husband's laptop. I asked him if he downloaded it, and he doesn't remember. He did download a newer version of Adobe, though. When I checked the properties of the McAfee, it said it was created on May 16, which is the same day he upgraded the Adobe. I don't know if something popped up and asked if he wanted McAfee, or what, but it's there. He didn't intentionally add it, anyway. The file path says it is at C:\users\public. What exactly does that mean? I know he was logged on, if he was using his computer. So why would it say "public"?

Thanks!
 

A:Solved: Question about McAfee

Read other 14 answers
RELEVANCY SCORE 43.6

Hi all! Hoping someone here can help me out. I have McAfee security suite on my system. A couple days ago, the good folks here helped rid me of a trojan and generally cleaned up my system. (Thanks again to all who aided me in that "adventure" ). Anyhow, ever since the cleanup, my privacy service doesn't automatically start; I have to select it and hit "run" in order to activate it. I don't like this as I tend to be a little uhm...uhm...bubbleheaded is a good enough word here and I like that the kids can't access the internet without having Dad or myself input the password...Anyhow, I have been all over McAfee and the suite, and I cannot figure out how to make it "always on"...anyone have a clue? Also, how do I keep these blasted trojans off my computer??? I did another ewido scan today because McAfee again said I had some trojan...how is it ewido can rid me of it, but McAfee (when I did a scan) couldn't find it? Is McAfee just a waste of time and $$?
 

A:Solved: McAfee Question

Read other 10 answers
RELEVANCY SCORE 43.6

I recently had trouble publishing my website but received help in another forum, and the problem was solved by disabling the firewall to publish the website and then re-enable it afterwards.

I am trying to figure out how to enable the McAfee firewall to allow me to publish to my web host server without disabling the firewall. I went to the McAfee website and it said to right click on the M on the task bar and then click on Personal Firewall. Well, when I right click on the M, there is no choice for Personal Firewall. Here are my choices:

Open Security Center
Updates
Scan
Quick Links
Customer Support
(The Quick Links does not list firewall as a choice, only "lockdown firewall" and "restore firewall detaults.)

When I go into the Security Center and Click on Firewall, my only choices are enable or disable.

I tried reading the help in the McAfee Security Center. I cannot figure this out. Can anyone help me?

Thanks,
Sue
 

Read other answers
RELEVANCY SCORE 43.6

Am I crazy??? I have an HP computer, run IE AND Netscape, and use Mcafee as my AV! Anyway, barring random driver issues and GPFs, my question for the moment is: How in the world can I get better performance while running Vshield?? It seems that right after startup my programs ... well, heck, everything runs sloooooooooooooow. Of course, when I shut down Mcafee all is well. I have checked my resources (which are now at 71%) and I only get 10% or less after shutting it down. Does this make sense? I have no problem killing the program when I'm offline, but not having any protection online is stupid (Vshield actually caught a bug on an IE haters site and killed it, I was impressed! Musta been an old one.)
 

A:crazy? (mcafee question)

Read other 16 answers
RELEVANCY SCORE 43.6

Is there a way to schedule events for McAfee. I used Norton in the past and you could schedule scans and updates; however McAfee seems to do these things whenever it feels like it.

Primarily I am looking to schedule updates and scans.

thanks

A:Question About Scheduling For Mcafee

See if the instructions HERE: McAfee Antivirus Guide help you to set up a scanning schedule. What you want is on page 29,30, and 31 of the guide.

Read other 2 answers
RELEVANCY SCORE 43.6

Hello everyone. I'm back. I have an Acer laptop that came with Mcafee anti-virus and associated programs. They are nearing their new computer expiration date. Can I remove these with no adverse effect on my computer? My husband will be installing Avast, Comodo Firewall, and Super Antispyware or Malware Bytes.

Thanks to everyone
Golfer Guy's Wife
 

A:Mcafee Removal Question

Read other 6 answers
RELEVANCY SCORE 43.6

I have a friend that has McAfee Anti Virus installed on her system using Win.Me. She wants to uninstall it and switch to Norton but she says you NEED to go online to the McAfee web site to uninstall it? Is that true?
I've ALWAYS used Add\Remove progams to uninstall.
She has McAfee: Build # 8.0.25 Engine Version # 4.2.60 Dat Version # 4.04312.
Please keep your answers simple because it's not my computer and I have NEVER used McAfee and know NOTHING about it. Thanks Dave
 

A:Solved: McAfee Question

Read other 8 answers
RELEVANCY SCORE 43.2

I'm a Netscape user from before there was an IE and when Bill Gates was saying the internet was a fad that mass interest in it would pass.

I have used Netscape 7 for quite a while and downloaded version 8 today. I am trying to customize the tool-bars. I would like to move or re-move Google, Security Center, etc. on the navigation bar.

I would also like to remove the add-bookmark item from the personal tool-bar.

Does anyone know how to do this?
 

A:Netscape 8 Configuration Question

Alex,

It doesn't look like the Google search field can be removed.

To remove the Security Center and Bookmark items from the toolbar, go to View > Toolbars > Customize. Then drag the unwanted item from the toolbar to the customize window.

If I find a way to get rid of the Google search, I'll repost here.
 

Read other 3 answers
RELEVANCY SCORE 43.2

Quick question. When I go into system configuration into the 'Startup' tab, it shows programs that are not on my computer anymore (at least I think). Is there anyway to get rid of these? I follow the file link and can't find them so I believe they are removed. Just wondering how to delete them from the Startup tab.

A:System Configuration question.

Open registry editor and browse to HKLM>Software>Microsoft>Windows>Curent Version>explorer>Run. Delete this Run key.

Method Three in OPTION TWO.

Startup Programs - Enable or Disable

Read other 3 answers
RELEVANCY SCORE 43.2

I have a dell XPS 15 l502x which is supported by a 130W adapter. My adapter broke and I had to purchase a new one. well the question is that I received a 180W charger online (obv their mistake). Will it cause any damage to my Laptop as it is of higher watt than the normal one or can I continue to use it as it did not throw up any error when I plugged it in .

Looking forward to a response.
Thanks in Advance. 

A:Hardware configuration question

Hi,
Thank you for writing to us!
We would suggest you not use the 180W  adapter  as it might cause damages to the main board.
Kindly private message the service tag and email address.
Thanks
Robin

Read other 2 answers
RELEVANCY SCORE 43.2

Can I add the following ram board to my existing [email protected] with CL2.5?
PC2700 @333mgz with CL3
I have checked with my computer manufacturer and they state that my system will accept 1GB.
 

A:Ram memory configuration question

If you're existing memory is clocked @ 266mhz than you may indeed be able to use the PC2700 333mhz memory but it will run at 266mhz. It really all depends on your motherboard.
 

Read other 2 answers
RELEVANCY SCORE 43.2

I have about a dozen HP T5325's in my network.  We have recently put XenApp 7.5 in place.  I am unable to configure a connection on the 5325's.  When I choose Citrix ICA, it wants me to choose Server/Published App, the type of protocol, etc., and the connection won't work with those settings.  Choosing the XenApp connection, it's using the PNAgent, and that's not working either. I have an abundacne of HP T5565's/T510's, and those all work great with Firmware 4.4 or later.  I just choose Citrix, put in the URL, and go, and it works. I did go download the latest firmware for the 5325 and install that, but I already had that, so that didn't help. What I'm wondering is, is it possible to make the 5325's work?  If so, what do I need to download, or how does the connection need to be configured?

A:HP T5325 Configuration Question

Hi Did you ever find a solution to this as we have the same issue? We have tried a few things but doesn't look good! Looks like we will have to replace all of these devices. Thanks

Read other 1 answers
RELEVANCY SCORE 43.2

Hello everyone,

I recently bought a Linksys wireless router so that I can finally get wifi in my home. The computer I'm on now is going to "host" the router. I use verizon dsl, and a dsl modem. I correctly plugged the Linksys in all of it's intended ports, but Windows Vista doesn't pick it up. I "googled" around a good bit for the solution. I basically found out that the CD with the Linksys is useless, and I have to allow my modem to connect itself and the linksys at the same time manually (configuring). To do this, apparently, I have to get my gateway address (which would be 192.168.1.1), and type that into my web browser (being firefox). The Westell site comes up with my connection info. - I "log in" with "admin" "admin" as the user and pass. Now I have the administration to change my modem and connection settings, WHAT SHOULD I DO FROM HERE?

Thank you all very much,
FenderGuy2112
 

A:Linksys Configuration Question.

That would be unusual that your LinkSys disk is useless, because most will get you started in VISTA as well as WXP.
There are updates at the LinkSys site for each operating system. You will benefit from going to the LinkSys Support site, while knowing your model number and version number, then download and print the Quick Install Guide, the long User Guide in PDF format, and the latest drivers... which may be about 36 MB or more.
Then follow the instructions in the quick install or user guide after you install the latest driver... you are on the right track... you may want to talk to tech support of your high speed connection to see what they require, codes wise... as they vary from location to location.
 

Read other 1 answers
RELEVANCY SCORE 43.2

this is my first NAS device. what raid config should i run? JBOD, RAID 0 (striping), or RAID 1 (mirrioring). I am using the NAS primarily for storage. however, i want to stream video from it as well. i am going with two WD black edit 1TB HD's.
 

A:NAS RAID configuration question

Read other 6 answers
RELEVANCY SCORE 43.2

I just completed the download for the COMDO antivirus program and each time open  my computer I'm greeted with a huge pop-up box that reads:
 
"A CERTIFIED TECHNICIAN CAN NOW HELP YOU CONFIGURE IT FOR FREE. LIMITED TIME OFFER. CALL 1-888......"
 
I'm wondering if this is for real......does it really need to be configured to my computer, or is this simply a bait tactic to try to sell me something.
 
And if this is simply bait, is there a way to block it from popping up?
 
Thanks,
 
Harkcomp

A:Comodo Configuration question

I don't use Comodo but it sounds like Comodo's GeekbuddyUninstalling Comodo GeekBuddy

Read other 10 answers
RELEVANCY SCORE 43.2

I was asked this question in class and I'm not sure if I gave the right answer or not.

Company with 50 (max) different locations.
1 Head Office and 1 Store House
Each location has a static IP address.
Each location has max 13 PCs in the internal network.

Locations need to be able to connect via VPN thus have the same Sub Net:
Im thinking (IP) Class B/ (SN) 255.255.255.128 giving me 126 IPs/SN to work with just in case all locations connect to one location at the same time.
Q1: is this SN a good choice?

For the internal network at each location:

Internet

Router
Public IP (Static)
Private IP 172.16.0.1 / SN 255.255.255.128

Firewall with 2 NIC
Router facing NIC IP 172.16.0.2/ SN 255.255.255.128/ GW 172.16.0.1
LAN facing NIC IP 172.16.0.10/ SN 255.255.255.128/ GW 172.16.0.2
Hub/Switch
Data Server IP 172.16.10.1/ SN 255.255.255.128/ GW 172.16.0.2
File Server IP 172.16.10.2/ SN 255.255.255.128/ GW 172.16.0.2

Switch / Switches
PC1
PC2
PC3
Etc
IP adds 172.16.20.x/ SN 255.255.255.128/ GW 172.16.0.2
Q2: Is this the right configuration? If not what should I change?
Q3: Recommended OS for Firewall, Server 1 and Server 2.
Q4:Recommended hardware for Routers/Switches

Appreciate you taking the time to help me out.
 

Read other answers
RELEVANCY SCORE 42.8

I am working with a friends Gateway Laptop, XP.

She's had a ton of spyware, malware and a couple of viruses removed by SuperAnti Spyware. I am trying to load HijackThis but her outdated McAfee keeps spotting a suppose virus in HJT.

In trying to remove McAfee, there is no uninstall that I can see. The only thing re Mcafee in "Add/Remove programs is "Uninstall McAfee." Can I go into explore and simply delete all things McAfee? any suggestions?

Much appreciated friends!

Mark
 

A:Solved: Removing McAfee question

You need to stop the services and then try removing from add/remove programs. Might also be helpful to do this in safe mode.
 

Read other 3 answers
RELEVANCY SCORE 42.8

My computer came with McAfee virus scan and when I went to their site and tried to upgrade every time I start my computer it says 2 files are missing so it won't work..I have Norton System works on a disc that we bought and I believe that includes a virus scan>> Can I remove the McAffe and install the Norton System Works? I am very new at computers so I get nervous..Thanks so much..
 

A:question re: changing from McAfee to Norton

Read other 9 answers
RELEVANCY SCORE 42.8

Dear All,

Yesterday on a McAfee protected HP dc5750 vista business computer, an alert came up for McAfee stating a trojan had been detected (unfortuanetly I did not see this) when she opened an e-mail in outlook, but the colleague whose computer it is, stated it rebooted and opened up a screen with the warning that it could not delete it, the only options available were 'view log' and 'ignore'.

The log stated that the path and file name were SUSP_IRP_MJ_CREATE the only option available to us was the ignore, and after we ran a full scan there was no indication of any trojan etc, we checked the logs and even the event did not appear to be listed.

Since then we have done a system restore to an earlier time, at the moment I cannot remember why, but it resolved another issue.

Has anyone seen something like this before?, any recommendations as to what kind of action to take if needed.

best regards
phil
 

A:McAfee trojan alert question

Read other 9 answers
RELEVANCY SCORE 42.8

Comcast has taken over my cable ISP .. And Ill have to switch soon

I see that Comcast provides McAfee free.
Im currently running AVG and ZoneAlarm.
Is Comcasts version of McAfee any good, does it slow the system down like Norton or CA ??
Any advise/comments appreciated.
 

A:Solved: Comcast - McAfee question

Read other 16 answers
RELEVANCY SCORE 42.8

What do I need to do so that I can rigt click on the trash can and select "Shred Trash Can"?
I could do this before, but i reinstalled McAfee and now i can't. Hope anyone can help me.
 

A:Quick question ( McAfee Shredder )

Get rid of McAfee.....
 

Read other 3 answers
RELEVANCY SCORE 42.8

helloI have mcafee security center installed and it says on the Protection Status that I'm not protected. The "Computer & Files" says there's an ACTION REQUIRED. To resolve these problems, click FIX. It says the real-time scanning is disabled but when I click FIX, there's a message that says one or more problems cannot be fixed because of an error. Well, that's not really helpful. haha I checked Mcafee's website, but I can't seem to find it there.Anyone who's encountering the same problem?Thanks!

Read other answers
RELEVANCY SCORE 42.8

I posted this question already but I think that the intention was misunderstood and the topic was closed without an answer being given, so I will attempt to ask it again.After downloading and running the programs required by you in preparation of posting a help request, My Mcafee icons from both the system tray and my desktop have disappeared.In response to my question of why, one of your helpers indicated that now that I have posted my logs, I should make no further changes to my system. PLEASE BE AWARE I have made no changes on my own to my system since creating and posting the logs for your helpers to review. Nor am I attempting to circumvent the wait process by posting another thread. I understand that I have a place in line and I have no problem waiting for my turn. My question is simply did the steps that I took to prepare my system for help with your volunteers cause my anti-virus to be disabled and/or the icons to be removed from my system tray and desktop?I understand that the wait times are long and that ya'll are doing this during whatever free time you may have and i'm not trying to rush anybody into resolving my issue. It is WITH this understanding that I'd like a reply as to whether or not my system is now MORE vulnerable because my anti-virus program seems to have gone on holiday and I am currently (seemingly) without any real-time protection. Sticking to what 'Animal' said about not making any changes to my system until a helper has the opportunity to review m... Read more

A:Question About Mcafee and your preparation process

My apologies if my reply was not clear.

Restarting McAfee if the log you created didn't have it on, is considered making a change. That is the point of that post I made to you. Changing the status of antimalware and antivirus tools from their status of when the log created invalidates the log posted. The person who reviews the log sees McAfee off and offers you a potential fix with that scenario in mind. But when you run the fix it doesn't work because now McAfee is on. Then the confusion ensues.

I am not a trained malware expert to where I can look at your log and say with any certainty that a step in our preparatory instructions turned off McAfee in your case. I can say with reasonable confidence that that is not an issue that we have dealt with any regularity with other members who have posted logs that use McAfee. This would tell me that there is a high probability that whatever malware you may be dealing with is turning it off. Only a trained malware team member who will be working with you, will be able to answer your question of what is turning off McAfee with any degree of certainty.

Read other 3 answers
RELEVANCY SCORE 42.8

if i have 2 fans (MASSCOOL FD08025S1M4 80mm Case Fan) on the back of the case with one right on top of the other, should one blow in or should they both blow out? i also have a arctic cooling freezer 7 on the cpu (or i will when i build this weekend).

thanks.
 

A:Solved: case fan configuration question

It really depends on a lot of things. Generally speaking, if 2 fans are close to one another, you don't want one "in" and the other "out" because the air-flow will then be in a small loop and cooling for the interior will not be optimal. If there are plenty of intake ports for air, you may want both blowing out, especially if the power supply blows in.

Think about how air will flow with the case closed. Imagine some smoke flowing through the system.
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hi.
I have x2 320Gig Hdds and x2 DVD burners.
Simply put; Can I attach each Hdd to the end of each 80wire Ultra ATA cable as Master and the DVD drives as Slave. Using Jumper settings of course.
Will the speed of the Hdd's be affected by the DVD burners lower speeds?
I have read posts and recommendations from various sources and information is sketchy at best. Anyone have a clear and precise understanding of this. Or any links to Microsoft about it. As I have not found any topic from them at the moment addressing this choice of set-up.

Cheers.
 

A:Solved: IDE Hdd and DVD drive configuration question

Read other 6 answers
RELEVANCY SCORE 42.8

Well, it's just a thought I've had that since it's possible to connect a console to a PC monitor such as an HDMI-DVI connector for a PS3 for example, what about a way to play the sound through PC speakers? I ask this because not only would I be able to output a better resolution than my SDTV with my PC monitor, but I'm hoping to get better sound too if I could use my 2.1's since they're only a couple feet away (5.1's if I use it at home, 2.1's at the college dorms).

Thank you for any suggestions

-Wizdabest

A:Console Audio Configuration Question

Would this do the trick

Read other 1 answers
RELEVANCY SCORE 42.8

Hello all. Using Windows XP SP 2. After I use run, MSCONFIG, and bring up system config utility, I have it on selective startup. It shows Process System.ini.file and it is checked...Process Win.ini.file and it is checked...Load system services has a green highlighted box next to it...Load startup items with a green box...and Use original Boot.ini is checked with a green dot.
Are all of these supposed to be checked and highlighted like this? I've noticed some greater than usual memory usage and cannot remember if these are all supposed to be checked.
Any help or comments appreciated.
Thank you, Tom.

A:System Configuration Utility Question

Hi Ohfer,
Yes that is supposed to be check once you edit/disable/enable something in the startup it will be changed to selective startup. That is normal, the only difference I have is Load system services is checked for mine and yours is higlighted. I don't think it makes a big diffrence though.

Regards,
Extremeboy

Read other 2 answers
RELEVANCY SCORE 42.8

Keep scrolling down as pics take up a lot of space.

I am trying to clean out things in my start-up procedure that I don't need when I boot up the computer. Initially I disabled everything. One particular item keeps getting put back on automatically somehow after re-boot. This particular item is related to Dell Support Center. I use it occasionally, but don't need it at startup. This is what is being re-selected. (note checked item)

Here is the process with which I performed this. As stated, Initially I did a <disable all> and clicked on <apply> to which I get a message

I click ok to the message above then <OK> to accept changes and I get the same message again to which I answer ok again. This seems to accept the changes. the next thing I see is the choice to restart or exit without restart. Either way when I do eventually restart I get this message below.

If I simply click ok it seems to keep the changes but dumps me back out to the system configuration Utility screen, which I don't want.

IF I check the box "don't show message or launch system config utility", the next time it I restart or power up again everything is as I selected except it puts the item "sprtcmd" back into the startup procedure again. How can I keep my changes and still not show this message everytime I start up?

 

A:System configuration utility question

Read other 10 answers
RELEVANCY SCORE 42.8

The last 3-4 times my NAV Corporate Edition has run the scan has lasted only 4-5 minutes and scans only a few thousand files. In the past, the full scans had been averaging 50-60 minutes with over 300,000 files scanned. I have checked the configuration and I can't seem to find anything that looks out of order. I've run the live update but that has not resolved the issue either?

Any suggestions?

Thanks in advance.
 

Read other answers
RELEVANCY SCORE 42.8

When I enter "msconfig" into the search box, a window opens that is titled system configuration. Five tabs are shown, and I know that I can choose the "startup" tab and uncheck items to speed up starting and shutting dowm my computer. My question is about the "services" tab. There are sooooooo many items listed here! Can I uncheck any of them and how would I know which ones? Thanks!
 

A:Solved: system configuration question

Read other 7 answers
RELEVANCY SCORE 42.8

Is it possible to configure Windows Store so it'll only show free apps or showing without the picture? My internet connection is not that fast and every time I tried to browse, it takes few seconds to load up a page, if I can just display types of apps (free, etc.) or list apps (without icon/picture), it'll speed up the loading time, but I can't find anywhere to configure this.

A:Windows Store configuration question

With Windows 8.1 you can launch the store from the metro screen, from that location if you scroll across to the right you should find "Top Free".

Also if you right click anywhere in open space in the store to bring up the menu, you should see "Top Free"

I am not aware myself of anyway to optimise for low bandwidth.

Hope that helps,

Harry

Read other 2 answers
RELEVANCY SCORE 42.8

I have a dual NIC in my work desktop (Windows 7 Ultimate 64 bit) connecting to separate routers. Eeach router has internet access, each on a different segment, each on the same subnet. We have 2 independent networks here. One segment is a domain and the other is a work group. Both have multiple servers.

The first NIC's IPv4 is configured with a static IP Address on a Domain and has a gateway configured. The second one also has a static IP address in a work group and is configured with no gateway. This seems to work fine, but the second one shows up as a Public newtork and I would prefer it to be a Work network.

Researching this pointed me to an article that said networks without default gateways are always public.

I changed the second NIC to also have a default gateway, matching the router's IP Address on the second segment. Windows slapped me for having 2 default gatewyas and let me save it anyway. Now, both connections are showing up under Domain Network and everything seems to be working fine. Both connections show that they have internet connectivity.

I fear that just because they seem to be working does not necessarily mean that is is working efficiently. I am also not positive that it even matters that the second one is listed as a Public network. Can anyone identify the proper configuration in my situation?

A:Dual NIC, 2 Segment configuration question

OK, after a bit more poking I now have the second router configured to assign a static leased IP Address for my second NIC where it assigns the NIC an IP address based on the MAC Address of the card. Then I configured the ipv4 for that card to obtain an ip address automatically.

Now, that connection's details show the original IP Address (the one I had previously set as a static IP on the card itself) as well as a default gateway (Router #2's IP Address), and I am no longer getting slapped by Windows for having 2 default gateways (even though each connection shows that it has a default gateway in the details). It is also showing up as a connection in the Domain Network's location.

Visually, this seems to be set up the way I would expect to have it, but I am still not 100% positive that I have good expectations.

Any input?

Read other 1 answers
RELEVANCY SCORE 42.8

The problem is that since I purchased ZA Pro my wifes games ( primarily Pogo ) will not download. She just plays online games. If I turn on the Windows firewall and turn off ZA everything works fine. I've tried changing a few settings here and there - one at a time then putting it back where it was. There is so much there I've become a bit overwhelmed and thought I better stop and ask for more help at this point.

I almost forgot to mention what actually occurs. When I attempt to download a game the screen just "sits there" for a few minutes then I get an error message that says " java not working or not found ". But apparently it's working fine because the games load quickly using Windows firewall.

Thank you - Keith

A:Zone Alarm Pro Configuration Question

Open ZoneAlarm's user interface. Click on the privacy tab on the left, then click on the Sites tab on the upper right. Scroll to the website the game comes from, then right click on that site. You will see a small window pop-up with three tabs. Click on the Mobile Code tab. At the very least, for the games to work you will have to uncheck the box by Block embedded objects [java, ActiveX]. You may have to clear other check marks in this tab. Experiment and find out.Hope this helps.Orange Blossom

Read other 8 answers
RELEVANCY SCORE 42.8

I'm sure my brain has the answer to this from when I got my network cert 10 years ago but I just can't seem to figure this one out.

When I cross connect the switches the link lights go crazy and I can't connect to the internet or the servers.

------------------------------------------------
My configuration is the following

2 Poweredge 440sc's

48 port patch panel

3 Netgear 24 port 100/1000 switches (Then do NOT have a dedicated uplink port)

A Dlink 4 port 10/100/1000 router.
-----------------------------------------------

Its wired like this (I'll try to keep it simple without pictures)

Switch 1

Servers, Phone System and 4 ports from the Patch Panel
1 Connection to the Router

Switch 2

22 connections to the patch panel
1 Interconnect to Switch 1
1 Connection to the Router

22 connections to the patch panel
1 Interconnect to Switch 1
1 Connection to the Router
So in the configuration, technically each switch is interconnected twice, once through the interconnects going from 2 and 3 back to 1 and then each switch's connection to the router.

When I take the Interconnects out or the simultaneous connections to the router (one or the other), everything works fine.

Why is this happening? I would think more interconnections the better.

Secondary question:

Given it does't work, which way would work better, the interconnections to Switch 1 with 1 wire going to the router from Switch 1 or all interconnecting at the router (It is a re... Read more

A:Multiple Switch Configuration Question

The reason the way you have it wired doesn't work is because you created the text book switch loop. Apparently your switches and router does not support spanning tree. Spanning tree allows multiple meshed links between switches without creating loops by determining best pathing to the root switch and putting the other links in blocking mode.
 

Read other 1 answers