Over 1 million tech questions and answers.

Slow (under 25 kbps) data transfer to Bitlocker-encrypted external hard drive

Q: Slow (under 25 kbps) data transfer to Bitlocker-encrypted external hard drive

Hi All,
I'm hoping that some of the gurus in this area can help me to resolve why my transfer rate to my external hard drive is so slow (ranges from 200 kbps to 15 kbps), but is almost always in the 15-20 kbps range vs. an advertised/expected transfer rate of

5 Gbps. That's < 1% of expected transfer rate. Any thoughts on possible root causes that I should investigate?

I have an HP Probook 430 G1 laptop with a Samsung SSD 850 PRO 256 GB SCSI internal hard drive and 4 GB RAM running Windows 7 Enterprise SP1 64-bit. I also have a Western Digital My Passport Ultra 1 TB external hard driveBoth the internal drive and the external drive are bitlocker encryptedI've connected the drives via USB 3.0 ports + cable. I've also connected the drives via USB 2.0 port on laptop and USB 3.0 cable.I've checked the My Passport for errors and found none.
Any insight would be much appreciated.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Slow (under 25 kbps) data transfer to Bitlocker-encrypted external hard drive

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 105.6

I own an external hard drive of 500GB Seagate Go in which i have stored many valuable data. While encrypting this drive accidentally the laptop {in which i am using Windows7) went off the encryption was 14% done and the drive was set to auto-unlock on my
laptop. when i restarted the my laptop was unable to unlock the drive (It's reading the drive but not showing on windows explorer and i tried to mange it from bitlocker drive encryption in control panel but bitlocker stopped responding) so I tried to unlock
this on my friend's computer but again the same thing happened after that i tried other steps from


http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/58e44671-0cf0-480b-9668-3876c30752a9


and


http://technet.microsoft.com/en-us/library/dd875513%28WS.10%29.aspx


but nothing seems to work out.


suppose the other information needed are as follows:


BitLocker Drive Encryption Recovery Key



 The recovery key is used to recover the data on a BitLocker protected drive.



To verify that this is the correct recovery key compare the identification with what is presented on the recovery screen.



Recovery key identification: 516G88BE-4141-42

Full recovery key identification: 516F88BE-4141-42D8-A247-4997D3F57FDA



BitLocker Recovery Key:

<... Read more

Read other answers
RELEVANCY SCORE 105.6

Hi folks, Need some help here.  I reformatted (complete reformat with no personal preferences saved) of Windows 10 because of several glitches that were annoying.  I was smart to backup all my documents to an external hard drive that was encrypted with BitLocker.  But once the reformat was complete, the drive is no longer detected.  I can see the drive in Disk Management but it won't pop up in explorer and BitLocker does not prompt me when I plug in.  Help!  My two drives have all my backups and backups of backups!!! I've tried to update all the software/firmware/drivers but to no avail. I'm still under warranty but this is a software issue only I'm certain of it.   Help!

Read other answers
RELEVANCY SCORE 99.2

I enabled bitlocker by editing the group policy. At tha time, I encrypted my internal and external hard drive. The internal drive saved the key to my usb drive and by default, the external drive save it in my Documents folder. I also selected the auto-unlock option to prevent myself from having to key my password each time I used the drive. Due to performance issues after upgrading from Vista, I decided to reinstall Windows 7. I copied all of my data over to the external drive from the Documents folder, right clicked th external drive from the Computer folder and assumed by removing the password, which is allowed since the auto-unlock setting was enabled (not the best idea for those who might be considering this) and thought that Bitlocker was disabled from the external drive and was not aware that it had to be turned off from the Control Panel System and Security area. I proceeded to install Ubuntu which repartitioned the hard drive.I was curious to see if the new beta release fixed a kernel panic issue I was experiencing and it did not. I now went back to Windows 7 and started the installation. This repartitioned the drive again and everything was reinstalled. I go to plug in my external drive and now I'm prompted for the 48 digit recovery key. Ok, I pull out my jump drive to find that I don't have it. Since it was in my Documents folder and I copied all of that data to the external drive prior to the reinstall, its now encrypted on the drive and I've basically lost all of ... Read more

A:Cannot access external hard drive after enabling Bitlocker to go. Recovery key file is on the encrypted drive and I cannot access it. Any suggestions?

No, without the cert you cannot gain access to the drive, by design, and as expected behavior. If you could, there would not be a reason for the encryption to exist at all.Rating posts helps other users
Mark L. Ferguson MS-MVP

Read other 8 answers
RELEVANCY SCORE 96.8

Hi,
please help
how can I recover data from a damaged disk (not physically) of an external encrypted Bitlocer.
Description of the situation:

After connecting the drive - I can decipher it by typing the password - but when you try to open the contents of the report the message "format disk"
- the disk probably has some volume damaged - it has been disconnected from the computer (without being turned off)
What I have done so far:

Using the "Lazesoft" program - I managed to copy (of course after entering the password
on the damaged disk)
the content to another external disk (full - looking after size) but -
this data is encrypted (mainly ending with .ER)
I am asking for a hint:

whether the data that is on the new disk can somehow read (on this disk I can try) [or/and]how to create a damaged disk image to try on another disk [or/and]how to repair a damaged disk (as a last resort) - I am afraid of total data loss [or/and]what other program to use to copy data from a damaged disk
but decrypted
Thank you in advance for your help
Best Regards
S?awek

Read other answers
RELEVANCY SCORE 93.2

I need advices about how can I solve my issue:

I have an external drive. I started the encryption drive with bitlocker, during encryption process,
the drive has been disconnected so I wasn?t able to continue the encryption process.

Now, the drive is partially encrypted. When I want to access the drive, I got the error message
?Encryption Failed to recover from an abruptly terminated conversion?.

I would like a procedure to recover the remaining data: encrypted and non encrypted

I used M3 Bitlocker Recovery but the tool freezes, I am currently trying TestDisk 7.0. Analysis
is in progress.

You'll find attached screenshots and detailed description of the situation.

I have the passwords & recovery keys

ps: I cant attach screenshots

Read other answers
RELEVANCY SCORE 93.2

I just started using BitLocker on a Windows7 Computer and am confused about one specific aspect of recovering data drives. I have read through the tutorials on here but I can't seem to find anywhere that explicitly states if this is possible or not.

From this link: Regain access to a computer locked by BitLocker Drive Encryption

I see the statement that "To unlock the drive and regain access to your files, you will need the BitLocker recovery password. If you also encrypted data drives, you will need to have access to the drive that Windows is installed on as well."

My question is if my OS drive dies, will the data drives be recoverable with the password and/or recovery key?

I am not currently in such a situation but I would like to prepare for all possibilities. Since a TPM is needed to store the encryption keys on for the OS drive (I just ordered one but have not encrypted my OS drive yet), are the encryption keys for the data drives are stored on the OS drive itself and this is the issue?

Most of the things I find on Google when trying to search about this issue discuss recovering a data drive that is failing, not a data drive that is in good health but does not have access to the system drive. Can anyone say definitively if this is possible, or do I need to be prepared to lose all data on data drives if my system drive crashes?

A:BitLocker Encrypted Data Drive Recovery Question

Based upon what I have read, your data drives will be UNRECOVERABLE if your OS drive dies. I would consider setting up a RAID 5 array for your OS drive for redundancy, this way if one drive dies, all you have to do is replace it and the missing data pieces will be recreated.

Read other 3 answers
RELEVANCY SCORE 93.2

Hello Dears. I had encrypted my drive by Bitlocker in windows 7. 
few days after my friend did quick format in my encrypted drive.
my 300 gb of data lost. and nothing saved
i remember unlock password. 
how can i recover my data ??? i need my data
i tried drive recovering tools (advanced EFS data recovery, easeus . . ,) . but . . . it's encrypted and formatted drive. 
can i undo quick format and decrypt ???
sorry my english is not good.
someone help me please. 

A:Can i recover lost data from encrypted drive by Bitlocker

BitLocker is not the cause of failed to recover files. Format a drive will clear all data saved on the hard disk. Thus recovery formatted data will be a hard disk based technology but not related to operation system. There is no build-in data recovery feature in Windows operations. So we will needto use third party recovery tool or contact third party data recovery company for current issue.

As recovery missing data service will be expensive, we can also check emails and contact friends to see if that can help get a part of files back especially for photos, documents etc.

Read other 8 answers
RELEVANCY SCORE 91.2

Hi folks,
Just came across a scenario for one of our customer. 

Trying to recover data off a drive that is bitlocker encrypted. No recovery key available to get pass bitlocker and access the drive.
Please advise if I reinstall OS preserving the old data in windows.old folder; will I be able to get the access the windows.old folder afterwards to get the data off it.

Thanks in Advance

Read other answers
RELEVANCY SCORE 88

I have been using a USB 2.0 Seagate 250GB external hard drive for a number of years and it's been working fine.

My laptop has USB 3.0 ports.

The last couple of weeks it's got really slow (less than a MBs) when transferring a video file.

I checked the hard drive for errors - none were found.
USB drivers are up to date Driver Booster 3 says.
Is there some settings I could try to speed things up?

As far as I know I've not changed anything so I don't know why it's suddenly got so slow.

A:Extremely slow transfer speed to external hard drive

If you right click the drive in Device Manager and look through the Properties you may see an option to either treat the drive as removable or permanent. Removable supposedly you can unplug without ejecting. But it is slow. Permanent supposedly enables write caching. Likely it was set to permanent before.

If nothing seems apropos you can try the old trick of deleting the drivers and rebooting. Plug and play will install the same drivers that were there but will do it "right" somehow. I have seen a lot of problems disappear just by doing this on a particular device. That is why support does it. Anecdotal success rate seems to me around 50%.

Read other answers
RELEVANCY SCORE 88

Hi Everyone.

I have recently had to format my hard drive and re-install windows. I have also had to replace the motherboard, CPU and power supply. I borrowed a 1.5 TB Freecom firewire external hard drive from a friend to back-up important data before the format, but the transfer speed is uselessly slow now that I am attempting to put the data back on the drive.

I have tried:

- updating the drivers for the firewire card
- switching to 1394 OHCI Compliant Host Controller (legacy) in the device manager
- Optimizing the drive for 'better performance' as opposed to 'speedy removal' in the drive's properties.

As things stand at the moment, I am getting about 400 kb/ps transfer speed from the external to my on-board drive. As you can imagine, this is virtually useless to me, considering I have hundreds of gigabytes worth of data to transfer.

Any help/suggestions would be greatly appreciated.

A:Extremely slow transfer speed from external hard drive

The best option if the external HD offers an eSata port would be to plug the drive in by either an eSata port provided with the case you or by an addon eSata card. Even when backing things up on a drive in a usb enclosure like seeing a full system image made the data transfer rate slows to a crawl.

One example for that was an image made from a 7 laptop to the drive in the external enclosure taking some 3hrs. to finish from a 120gb drive with hardly anything on it and comparing that to an image totally 497gb made to another internal drive on the desktop here only taking about 35min.!

Unfortunately the only other option would be removing the drive from the self contained external casing it came in to install internally like I did with one WD Essentials 500gb model during the beta and RC testing of 7 simply to add in an extra drive. Otherwise you have to suffer with what the firewire bus will allow.

Of course if it did have an eSata port you could also open the side cover on the case while powered down long enough to plug the drive into a port on the board long enough to see everything copied over which would be faster but just a little awkward. Then you would be using the onboard sata controllers.

Read other 2 answers
RELEVANCY SCORE 88

I have been using a USB 2.0 Seagate 250GB external hard drive for a number of years and it's been working fine.

My laptop has USB 3.0 ports.

The last couple of weeks it's got really slow (less than a MBs) when transferring a video file.

I checked the hard drive for errors - none were found.
USB drivers are up to date Driver Booster 3 says.
Is there some settings I could try to speed things up?

As far as I know I've not changed anything so I don't know why it's suddenly got so slow.

Read other answers
RELEVANCY SCORE 84.4

Hi, After weeks of trying to get an answer to this problem without any assistance, either online or here (what's the use of a warranty when there's no customer service to speak of?) I tried transferring some files to my flash drive a day ago. The thing that happened now was that the transfer started out fine for the first few seconds (as usual), before crawling to a halt and then stopping completely - I can't remember what the exact message was, but it was something in the vein of "problems with disk". I then found out that I could neither add or delete files to the flash drive as it had been write protected. I searched online for how I could remove this protection (regedit, command prompt), but nothing helped - to my great, great frustration. Therefore, the flash drive is now useless to me, thanks to the laptop. I then experienced that the external hard drive that I tried to transfer the files from had also been write protected! Before pulling out my hair I checked if this was also the case when I plugged it in to another laptop (Asus). It wasn't. But on my Lenovo z50-75 that hard drive is useless for some strange reason. After experiencing this mountain of problems I want to do a full factory reset on my laptop, and then reinstall all my programs. My question is how I go about doing this. And also: when doing the reset, will it boot up with Windows 10, as it did when I purchased the laptop a little over a year ago?   

Read other answers
RELEVANCY SCORE 80

To install another operating system, I forced to resize my partitions.
I had a drive that was encrypted with bitlocker. After changing the drive and restart I noticed there were only two of the drives that on them Windows installed and another drives changed to free space.
Bitlocker encrypted drive was 100G and another drive 244G. Drives I converted to a drive then format it to restore my data. All the information was not encrypted, was returned but encrypted data was not returned even one bit. I changed the size of D to 200 GB again and after a lot of searching I found the repair-bde command.

this was result.
is there any solution to back my data?
please help

A:How to recover my data,encrypted by Bitlocker?(with this condition)

Welcome to Windows Seven Forums.

Please check this tutorial in the hope it will help you remove the Bitlocker drive encryption.

BitLocker Drive Encryption - Windows 7 Drive - Turn On or Off with no TPM

Read other 6 answers
RELEVANCY SCORE 80

Hello,

I currently have Win 7 Beta as my main OS with a non-system partition encrypted with Bit-locker(without TPM). I downloaded a copy of Win 7 RC, but will the new OS recognize the bit-locker encrypted partitions? Do I need to decrypt this drive, re-install the OS and then encrypt this non-system partition again? (I don't have my boot partition encrypted)

Or will Win 7 RC natively recognize the bit-locker partition and I just have to provide the user key to mount the drive?

Thanks,
Icered

A:Migrating Win7Beta bitlocker encrypted data to Win 7 RC

Hello Icered, and welcome to Seven Forums.

I would recommend to decrypt the drive first, install the new OS, then use bit-locker to encrypt it afterwards.

Hope this helps,
Shawn

Read other 2 answers
RELEVANCY SCORE 79.2

My Lenovo Yoga c930 has stopped working and in the terms and conditions stated by Lenovo warranties says they do not guarentee the data stored on the device. So before I can send the laptop to Lenovo I need to backup the data myself.. So I purchased a NVMe SSD enclouse to read the SSD and copy the files. However it appears the harddrive is encrypted with bitlocker. How do I find my bitlocker code? I have totally unaware that bitlock was enpable on the machine nor do I have any idea where to find the key. Its not linked to my Mircosoft account. The machine was purchase brand new. How and I supposed to backup my data? Shouldn't data retention be a service the warries covers!?! I'm without a laptop at the moment and important data I need is stored within.  

Read other answers
RELEVANCY SCORE 79.2

Help. Ready to throw laptop away....
I was given a secondhand (but very new) HP Laptop <g class="gr_ gr_106 gr-alert gr_gramm gr_inline_cards gr_run_anim Style multiReplace" data-gr-id="106" id="106">that  is</g> running Windows 7 Professional.
In order to give all the previous owners files back to them and to clear some space on the <g class="gr_ gr_192 gr-alert gr_gramm gr_inline_cards gr_run_anim Punctuation only-ins replaceWithoutSep" data-gr-id="192" id="192">laptop</g>
I put all their files onto a Seagate External Hard Drive. 
In order to check that the previous owners will be able to open the hard drive with all their files I tried a) opening the hard drive (which was in the G: drive) and then b) trying to open an individual file.
I have run into problems with both despite having changed me to the Administrator. <g class="gr_ gr_2273 gr-alert gr_gramm gr_inline_cards gr_run_anim Punctuation only-ins replaceWithoutSep" data-gr-id="2273" id="2273">First</g>
a pop up comes up at the bottom right of the screen, where the task icons are, only giving me 10 minutes or so to look at files on the external hard drive if I click on that balloon. Once I have clicked on that I am able to open the hard drive and can see
all the files listed but I am unable to open any individual files as it says I do not have permission. Then in orde... Read more

Read other answers
RELEVANCY SCORE 79.2

Hi experts
My external USB disk was encrypted by bitlocker. It worked well until today. Now every time I try to decrypt the disk with no matter the password or key file, the USB disk lost connection.
My local IT said the it can be due to that some track of the disk is broken.
So in the case, is there any way I can get my data back.
Thanks very much. It is urgent. I am looking forward for your reply.   

Read other answers
RELEVANCY SCORE 79.2

Hello,

We would like to use Bitlocker to encrypt external devices. However, we do already have some external hard disks with built-in encryption. Is it possible to detect this, and not to re-encrypt those disks with Bitlocker ?

Thanks,

Soitjes.

A:Bitlocker - detect encrypted external disk ?

You might ask here Forum FAQisk Topic Part 6 -Bitlocker and BitLocker To Go

Read other 1 answers
RELEVANCY SCORE 78.4

Hello all,

Specs:
Asus P5N-E SLI
Intel Q6600 2.4ghz
Micron 4GB RAM
2x 320GB SATA Hitachi
1x 200GB IDE Seagate Baracuda 7200
nVidia 9600gt
Ultra 600Wat PSU
Ever since i bought my new motherboard (Asus P5N-E SLI) and SATA hard drives, my IDE hard drive was messing up. I can not load up Windows on it. When i install Winxp x64 on one of my 320gb hard drives, it loads but not fast. Before WinXP loads (progress bar and logo) the screen stays balck for about 20secs or so before it reaches the load screen. And right before it reaches the load screen, there is a gray load bar on the bottom of the screen. Then comes the GUI progress bar. It takes about another 40secs for it to fully load into windows. When I unplug the IDE hard drive, the gray load bar does not appear and the load time is very quick, 15 seconds or so. Also, when I try to transfer data from SATA hard drive to IDe, 3gigs would take around 25mins or so. Is there a way I can fix this issue?
Thanks

A:[SOLVED] Slow Boot Time, Slow Transfer Rates(Hard drive to hard drive)

Transferring files from SATA to IDE is a process- and IDE is no where near as fast as SATA, so you can expect some transfer times there. For the boot issue, it sounds like the computer is confused on what to load at first. Check your startup and recovery options by right-clicking my computer, advanced, startup and recovery, and see if multiple opearting systems are there. If so, remove the one that you know you don't want to load by editing the file.

Read other 19 answers
RELEVANCY SCORE 78.4

Hello all,

I didn't use my external hard drive for over a month, and today I decided that i wanted a back-up of some of the stuff on my laptop. I plugged it in and immediately a message popped up, saying that this drive was protected by something called BitLocker. It required me to enter a 48 digit recovery key. I had NEVER heard of BitLocker up until that point. I didn't know anything about a recovery key, and why didn't it ask for a regular password first, before asking for a recovery key? I didn't have a clue. I still don't have a clue. I searched my computer for BitLocker using the regular 8.1 system search. No results. I searched in PC Info. There is something about encryption there. That was, and is turned off. Not a mention of BitLocker anywhere. When i looked it up it said it comes with Windows 8.1 Pro or Enterprise edition. I am fairly certain I have regular 8.1. How in the name of all that is holy did I get saddled with this piece of shit encryption that locks me from my files, while I don't even want it? When I plugged it into my fathers laptop, also running 8.1 it gave the same message. When i plugged it into my brothers Asus tablet with keyboard combo, also running 8.1, it didn't give any problems. Does anyone here have any clue what is going on? Would be greatly, greatly appreciated.

Thank you

A:BitLocker and External Hard Drive(WD My passport 2TB)

I'm having the exact same problem. I've been dealing with it for months. Both of my external hard drives had this happen to them at roughly the same time, and I have no idea how. I too had never heard of Bitlocker before this happened. I tried calling WD and they told me to call Microsoft as Bitlocker is owned by Microsoft. I called Microsoft and they told me to talk to WD. I've been led in circles for months and still cannot access my hard drives and the files on them. I do not have the recovery keys and do not know how to get them. I have been searching for answers throughout the internet without any results. I was told that I could reformat them, and that might work, but then I would lose all of my files. I don't have a backup for them because my hard drives were the backups (that's why I had two!). If you have been able to fix this problem, or have any sort of solutions or options, please, please help me out.

Read other 1 answers
RELEVANCY SCORE 78.4

Dear Friends,
I have a Toshiba external hard drive. When I viewed the photos on it accidentally my friend locked with bitlocker in my absence. He has no idea about the recovery key and password. He has given some hints for the password. But all failed. Can anyone help me out of this issue.

A:External hard drive has to be opened from bitlocker

Hello Jenieragav, and welcome to Eight Forums.

I'm afraid that if you have do not have the password or recovery key, then about the only option is to format the drive to be able to use it again. That's what BitLocker is designed for. No access with password or key.

Read other 10 answers
RELEVANCY SCORE 77.2

Who would want their external drives to slow down? Me, that's
who!

Besides apps like BurstCopy that attempt to maximize data
transfer speed, are there any apps that can set the speed,
usually in Mbps, to any number you want?

XP and eSATA drives are like oil and water. They don't mix!
You can tweak the hell out of the system, it doesn't matter.
XP was developed before these super fast drives. Vista fixed
the problem by using dynamic virtual memory management.

If you want to read about how XP uses static paged pool and
paged table entries (PTEs) just Google the topic. Compare
XP to Vista in this area and you'll begin to understand the
problem.

Please, no more tweaks or registry hacks. If there is an
app that allows you to set the data transfer speed, direct
me to the link or site.

Thanks guys.
 

Read other answers
RELEVANCY SCORE 76.4

I am trying to transfer approximately 280 GB of data (music) in a My Book (320GB) external hard drive to a Simpletech (320GB) external hard drive using my HP dv9230 laptop with Vista installed. Using the USB ports

Each time I attempt to highlight the files on the source drive and drop into the "new" drive the computer appears to analyze/recognize the information from the source drive and calculate the "time remaining" but it just seems to freeze at that point. No error message, it just appears to stop.

I am not trying to transfer all the data at once I highlight a few folders at a time to transfer.

Any help is appreciated.

Thank you
 

A:Data transfer from one external drive to another external drive

Read other 10 answers
RELEVANCY SCORE 76.4

Hi,
I have problem with my external hard disk. I entered correct password, but it says encryption failed. The system i used to set bitlocker is no longer use and i don't have the recovery key. So is there anyway to get my hdd back??
Sorry for my English and thanks in advance.

A:Can't use bitlocker encrypted hard disk.

Still no reply?? Am I going to believe there is no one that can help me?? So Bad.

Read other 3 answers
RELEVANCY SCORE 76

Is there a way to transfer data from a old internal hard drive from a old computer (motherboard crashed) to my new computer??
The old was Win 98 the new is Win XP. I do not want to open the new computer to slave the old drive because it will void the warrenty. I do not want to loose all the data on the old drive. Any suggestions would be welcome.
 

A:transfer data from old hard drive

You'll need to hook that drive up to something in order to transfer the data. Go to Start > Progarms > Accessories and try the Files and Settings Transfer Wizard in XP.

There are cases that you can buy that will allow you to run a hard drive externally through the USB port. Some come with drives but you can buy them empty. If you got one of those, you'd also be able to use it for saving an image of your new hard drive in case it crashed.

Here's an example:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=523075&CatId=1204
 

Read other 2 answers
RELEVANCY SCORE 76

I have an older Pc but still works well, I am running windows xp sp2. I recently acquired a much larger hard drive than the one I am currently using, and a friend of mine mentioned changing them out, but I have no idea how to accomplish this.

I also would like to delete the information that was on the new hard drive previously, I took out my cd-rom and put the new hard drive in its place as a slave and it was recognized on startup, but I would like to have it as master with all my files and Os from my old hard drive.
 

A:I need to transfer data from one hard drive to another

Read other 13 answers
RELEVANCY SCORE 76

Is there an easy way to transfer everything from one hard drive to another if I put one in as master and the other as slave. Can you just do a disk copy?? Want to replace a smaller hard drive with a larger one and just want to transfer everything on to it. Thanks in advance
 

A:hard drive data transfer

Most harddrive manufacturers have a utility on their support web site that will do it for you. Check their site first.
 

Read other 2 answers
RELEVANCY SCORE 76

The motherboard on my Lenovo 910 crashed due to an overheated charger. I wanted to place data on the hard drive from the broken laptop onto another Lenovo laptop, the Yoga 2 Pro Model 20266, but they're incompatible. I'm particularly in need of Outlook email and calendar, or documents that weren't backed up to an external drive while an IT guy was diagnosing the system failure. What's the easiest, fastest way to get data on the new machine? I don't have the adapter, equipment nor expertise to do it.
 

Read other answers
RELEVANCY SCORE 76

Greetings!
I installed a 60GB SSD a couple of years ago when they were quite expensive. I planned to use it solely for the operating system (Windows 7 Ultimate x 64). However over the years, it has become full to overflowing. I would like to clean it up and return it to the operating system only. Unfortunately I do not have the original disks or access to the installation programs for most of the information on the SSD. I have two other hard drives in the system - a 500GB Velociraptor that I originally wanted to hold all the programs and a 1000GB for the data. Can anyone tell me the best way to transfer the data off the SSD without screwing up my system? Thanks!

A:Transfer data from SSD to another hard drive?

  
Quote: Originally Posted by zyton777


Greetings!
I installed a 60GB SSD a couple of years ago when they were quite expensive. I planned to use it solely for the operating system (Windows 7 Ultimate x 64). However over the years, it has become full to overflowing. I would like to clean it up and return it to the operating system only. Unfortunately I do not have the original disks or access to the installation programs for most of the information on the SSD. I have two other hard drives in the system - a 500GB Velociraptor that I originally wanted to hold all the programs and a 1000GB for the data. Can anyone tell me the best way to transfer the data off the SSD without screwing up my system? Thanks!


Not having the Win 7 disks is no problem as long as you have the Product Key, the 25 character code that is on a small sticker somewhere on your PC. You can download the ISO from here Official Windows 7 SP1 ISO from Digital River ? My Digital Life and burn onto a DVD (not more than 4X) and use this for a clean install on your SSD. When you are happy with the install, you can insert your Product Key and active your Win 7. Use this tutorial to aid on your installation.
Clean Install Windows 7 Good luck

If you can put some programs on your SSD, you will see a big advantage in speed. This is the desired way to install SSD's.

Read other 3 answers
RELEVANCY SCORE 76

My friend got a new dell and it didnt have any ide ports. So i told her i would take her old IDE hard drive and transfer all of its contents to one of my sata hard drives and then take my sata hard drive over to her house and put all the data on her hard drive. I installed the ide in my system no problem but when i try and transfer all the data i get errors with security. i tried this You don't currently have permission to access this fold and it allows me access to that folder but not to its files or sub folders. I get errors like these depending on if its a file or folder error TinyPic I could go through and do this for every single file but that would take about 13 years lol. I started doing that but then i realized that ill prob have to do the same thing when i take my hard drive to her computer. Is there a way to blanket the whole hard drive and give me, the admin, rights to every file

Windows 7 It was my idea... sigh

Thanks
Patrick

A:IDE hard drive data transfer

  
Quote: Originally Posted by fatcat87


My friend got a new dell and it didnt have any ide ports. So i told her i would take her old IDE hard drive and transfer all of its contents to one of my sata hard drives and then take my sata hard drive over to her house and put all the data on her hard drive. I installed the ide in my system no problem but when i try and transfer all the data i get errors with security. i tried this You don't currently have permission to access this fold and it allows me access to that folder but not to its files or sub folders. I get errors like these depending on if its a file or folder error TinyPic I could go through and do this for every single file but that would take about 13 years lol. I started doing that but then i realized that ill prob have to do the same thing when i take my hard drive to her computer. Is there a way to blanket the whole hard drive and give me, the admin, rights to every file

Windows 7 It was my idea... sigh

Thanks
Patrick



Hi and welcome

You need to take ownership. instructions here. Take Ownership Shortcut Once added just right click the folder you and highlight take ownership.

Ken

Read other 2 answers
RELEVANCY SCORE 76

Hey all,

Right now one of my hard drives is almost full. It's a 186 gig and I've got like 2 gigs left to use on it, lol. But then I also have a totally unused 298 gig HDD (it's already installed though). What I want to do is transfer some of my stuff, well... MOST of my stuff.... from the 186 gig to my 298 gig. But I want to do it the right way so I don't corrupt any files or anything.

Basically the biggest things are all of my games, my music (I have like 20 gigs of mp3s lol), and some other media.

The only way I can think of to move the stuff from one HDD to the other is to just sit there and drag all the stuff, folder by folder, file by file, to my 298 gig, but that just seems a little too easy. Is that not the right way to do it?

I figured there would be some kind of formal Windows XP method to do it but I wasn't sure.

Any help with this would be appreciated. Thanks in advance, folks!

BTW, yes I am using Windows XP SP2.
 

A:Hard Drive Data Transfer - HELP!

Read other 14 answers
RELEVANCY SCORE 76

Does anyone have any recomendations for transferring the entire c: drive from one hard drive to a file on another hard drive? right now i am using cobian 8 for the software and usb/ide cable for the transferring? it is not very quick or reliable and i would rather find something a lot quicker and a lot more reliable, any recommendations will be extremely appreciated!!! Thank You!!
 

A:data transfer from one hard drive to another?

Read other 15 answers
RELEVANCY SCORE 76

hello Everyone,

I want to upgrade my old hard drive because I think my old one is on the way out.

Is there a way to copy everything from one drive to another so I don't have to go through the process of installing the operating system and all the applications from scratch?

Thank you

Bigbavarian

A:Transfer all data from one hard drive to new one

Most hard drive manufactures provide software so you can move your windows from the old drive to the new drive. What brand name and model number is the new drive? (this info will help us help you get the software to do this from the manufacture)

Read other 4 answers
RELEVANCY SCORE 75.6

Tried yesterday with an SATA adapter (unpowered) and my Yoga 920 would ding that something was plugged in, but wouldn't show it in File Explorer.Traded the unpowered drive for a powered one and the same result, a ding but nothing shows up. Is there something else that I can do? Thanks in advance

A:Can I remove the hard drive from my Yoga 2 Pro and plug it into an SATA drive and transfer the data?

I am confused.  You are talking about an mSATA -> USB adapter?  mSATA-> 2280 SSD?  What is a powered mSATA adapter?

Read other 1 answers
RELEVANCY SCORE 75.6

I have a computer with 2 500 GB hard disks. One of the disks contain the installed/active programs and Windows 7 while the other one contains files (pics, vids, etc.) My computer crashed while my kids were using it. Did not know what actually happened I reformatted the computer. At the initial stages of the reformatting, I was still able to see the 2nd hard disk which contained my files which happened to be encrypted by bitlocker. I don't know exactly what went wrong but now, my computer doesn't detect that hard disk and even my cd ROM drive is not being detected anymore. Tried to see if the BIOS will detect it but it couldn't either. Any suggestions? Any help will be appreciated.
 

A:Undetected hard disk encrypted by bitlocker

WHat version of windows 7 are you using?
 

Read other 1 answers
RELEVANCY SCORE 75.2

Is there a program taht will allow for this, that is relatively cheap, or is there a way to do it without using a program?
 

A:Data transfer from hard drive to hard drive via USB cables

Read other 10 answers
RELEVANCY SCORE 75.2

I have a dell 2400 that died on me so I pulled the hard drive hoping to transfer pictures, quickbooks, etc. to my new laptop. I have a self powered Sabrent SATA/IDE USB adapter from newegg. Anyone use on of these before and have any luck???

Any information will be greatly appreciated! Thanks.
 

A:Transfer data off of old hard drive to laptop

tried with both 3.5inch IDE, 2.5inch IDE and sata with no problem. looks the same with different brand though.
 

Read other 5 answers
RELEVANCY SCORE 75.2

Hi,

Ive been using my 500gb hitachi hard drive for along time now and its just about full, i have a new 1TB hard drive which is also more powerful.

Does anyone know how i can transfer all the contents from my old 500gb hard drive onto this new 1TB hard drive, as its running slow with only half a gb free space on it.
I want to sell my old 500gb hard drive after i have transfered all my data from it to my new one.

Any help would be appreciated, thanks.

A:Hard Drive Upgrade - How to transfer old data to new hdd

Get yourself some software to do it would be my answer, I dont know if you would have to reinstall vista.
Acronis seem a good supplier.

This should copy the compleate HD.
Or
Install the new HD with a fresh install of Vista and directly copy the contents of the second drive(Just the data you want to keep) to the new one.

Look here for more info Partition Copying Utilities (Drive Copy, etc.)

Read other 8 answers
RELEVANCY SCORE 75.2

My computer decided to die on me, so now I want to transfer my data from the hard drive in the dead computer to my new one. I am not sure how to do this. I have heard of using an external hard drive or some way where you make it the slave I'm not really sure.
I have an IDE, 80gb, 5400 rpm, 3.5 in hard drive.
All help will be appreciated!
 

A:How can I transfer data from old hard drive to new computer?

Put the drive in the second bay jumpered as a slave or on the second SATA cable.

Then drag and drop or use recovery software.

Or buy a good Powered (Addonics, for example) USB external drive Enclosure. Put the old drive in there, and plug it into a USB port where you can see everything... then drag and drop all the data... etc.

You can take as long as you need to get it right.

You might want to read up on where Outlook Express, Outlook, Firefox and so on keep their files... Quicken, Quickbooks, etc. But it is relatively trouble free.

You want the enclosure that has its own power adapter that plugs into the wall, as it really taxes your system to run this external drive off the USB power.

Be sure to shop for the correct enclosure. They have them for both SATA and EIDE and are not usually interchangeable.
 

Read other 1 answers
RELEVANCY SCORE 75.2

I went to Fry's to have my computer (HP Windows XP) looked at because it wouldn't turn on. I was told that my mother board was fried. So, I bought a new computer (HP pavillion with vista) and a hard drive enclosure and the guys at Fry's put my hard drive in it and told me that I would just need to hook it up, turn it on and drag and drop my files. I've tried that but it's not working. Could someone please take pitty on me and tell me how to do this. I've got very simple computer skills. I appreciate any and all advice!! Thanks in advance. Jen

A:How do I transfer data from hard drive to new computer?

Hi, Jen, and welcome to the forums.

First off, some info:
What was your old OS? What OS are you running now? What have you tried to do, and what happened when you tried that? Have you gotten any error messages?

Read other 6 answers
RELEVANCY SCORE 75.2

I am nnot sure if this is the right board, but here goes. I have a compaq 6270s. It was only a cheap backup for some files and office work. However recently the laptop took a bit of a bump and I am almost certain the hard drive has failed. Now I have another cheap replacement coming. The harddrive of the laptop can be easily removed. I wanted to know if it would be possible to transfer the data or at least some of it to my new computer and if so if there is a cheap piece of equipment that I can just plug the harddrive into and then connect it via USB to the laptop and just transfer like you would with any USB stick? Because the Compaq laptop won't boot up, there is nothing I can do from that angle however a quick search of Amazon showed all these results... https://www.amazon.co.uk/s/ref=nb_sb_noss_2/255-9957494-1401233?url=search-alias%3Daps&field-keyword... the first few seem as simple as plugging the harddrive in and connecting it via USB. Obviously the harddrive is not working to the point of booting up the laptop but might it still have the individual files I want? And secondly is the harddrive to USB as simple as I described. Thanks for your help. 

A:Hard drive data transfer to another laptop? HELP

@Tech-user93 Very simple, one of the following enclosures can do the job:        http://www.msy.com.au/132-25-hdd-enclosure You can re-use it many times. Regards.

Read other 1 answers
RELEVANCY SCORE 75.2

Hi

Im getting really slow transfer speeds to external usb hard disk.
Transfering a big file it starts off quite quick and gets up to 5% or so quite quickly.
Then it starts to slow down until it settles at around 5MB/s

Im at a loss i was expecting around 40MB/s maybe on USB 2 ?

My specs are (taken from CPUID)
Gigabyte GA-MA780G-UD3H motherboard
8GB DD2 4-4-4-12 @401Mhz
AMD Phenom II x4 940 @ 3013Mhz

Im at a loss. Is it a driver issue? When connected it shows under "Universal Serial Bus Controllers" as "USB Mass Storage Device"

any ideas please?

A:Slow transfer speed to external USB Hard disk?

For normal external USB 2 HDD I might expect ~30MB/s for a sequential file transfer.
What type of USB HDD are you using?

You could download CrystalDiskMark and post the performance figures.
Download Center - Crystal Dew World

Running the test on another HDD as well would be useful if you can get your hands on one. Might indicate a drive specific issue.

Read other 9 answers
RELEVANCY SCORE 74.8

Let suppose I have encrypted a USB pen drive by Bitlocker, Most of the Windows versions have Bitlocker installed and the system prompt for the password, and decrypt the USB drive.
There are certain versions of Windows 7,8,10 like Home Single edition in which Bitlocker is not installed. Now what will happen if I plugged it in a such system, whether it will prompt for the password and decrypt the USB drive or not?

Read other answers
RELEVANCY SCORE 74.8

I have 1 partition encrypted drive from windows 7 ultimate, now if i want to change to home premium which do not have bitlocker feature, will i still be able to access the bitlocker encrypted drive?

A:bitlocker encrypted drive

My initial answer is no.. Because Bitlocker is not a part of the lower end flavors of 7 and must be poresent. You should decrypt the data first before downgrading the OS

However, with that said,,, there is the policy you can set within Group Policy for USB flash drives to "Allow Access To Bitlocker-Protected Removable Data Drives From Earlier Versions Of Windows" that can assure that you have access to the USB Flash Drive on other operating systems and computers.

I do not know if this will work on External USB HDD's. I have not played around with bitlocker a whole lot,, need to set some time aside for testing it out.

The Group Policy for this is as follows

In the start search type Group an then click on Edit Group Policy

Computer Configuration / Administrative Templates / Windows Components / Bitlocker Drive Encryption / Removable Data Drives

This policy also shows under Fixed Data Drives. But only mentions FAT file system, if you formatted it as NTFS, I am not sure it will work.

and there you will find the policy.

This policy settings configures whether or not removable data drives formated with the FAT file system can be unlocked and viewed on computer running Windows Server 2008, Windows Vista, Windows XP with SP3, or Windows XP with SP2 operating systems.

But I doubt the data will be recoverable if you downgrade to Home Premium prior to unencrypting it.

Read other 2 answers
RELEVANCY SCORE 74.8

is there a certain size of file that you can not transfer to an external hard drive because it seems like anything over a couple gigs fails and tells me there isnt enough space when there is tons of space.
 

A:external hard drive transfer max?

Read other 6 answers