Over 1 million tech questions and answers.

Dial-pass

Q: Dial-pass

Hi there. Recently I've been getting popup's which are unwanted. I do have a popup stopper, but it just dont seem to block these ones!!!
I have a shared computer(belongs to my bf)
my children also use it on guest login without internet connected..
The problem popup sites are:
epass-key.com
dial-pass
gad-network.com
rapid-pass.com
adfarm.com
winantispyware.com
I have run spyhunter, Ad-Aware SE, spybot, all with no luck in totally removing them.
Any help would be appreciated.
westozgurl

RELEVANCY SCORE 200
Preferred Solution: Dial-pass

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Dial-pass

Run The Windows OneCare Free Scan (on-line scan)To run the Windows One Care Free ScanGo to Windows Live Onecare Free Scan site using Internet Explorer. It will say "Get a free PC safety scan"http://safety.live.com/site/en-us/default.htmMake sure you click "Full Service Scan" in the middle of the page and not the "Try It Now Free" offer on the right side.Allow the download of an Active X component.Choose "Complete Scan" in the window that opensClick "Next"Do not click on anything else that offers you a free trial or to sign up if you live in the US.Allow it to scan - it may take quite a while, possibly two hours or so depending on the size of your hard drive is and how fragmented your registry and drive may be.After completing the Windows OneCare Free Scan run both Adaware and Spybot Search and Destroy from safe mode, updating each program?s malware definitions before you reboot into safe mode to scan and allowing both to fix what they find.If you do not already have these freeware aps installed on your computer, you can get them at the following sites:*AdAware SE: http://www.majorgeeks.com/download506.html*Spybot S&D: http://www.safer-networking.org/en/index.htmlFollowing that that I suggest you post a ?HijackThis? log in the ?Hijack This? Logs and Analysis Forum for expert assistance with your malware infection.Read the pinned post in our ?HijackThis Logs and Analysis? forum, here http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/ Carefully read and follow all directions carefully.Following the instructions create a HJT log, and POST THE HJT LOG THAT YOU CREATED IN OUR HJT LOGS AND ANALYSIS FORUM ? not in this forum, at this link. http://www.bleepingcomputer.com/forums/posthjtlog.htmlInclude the specs for your computer (i.e., what processor, amount of RAM, brand or motherboard, etc, and briefly describe the problem you are experiencing.)Unless you are expert at editing the registry, Do not use the Hijack This program to try to fix anything by yourself as even what may seem to be a small mistake can render your operating system inoperable.Some files when in the correct folder for them may be fine while in another may be malware hiding. A member of our expert HJT Team will analyze your log, make recommendations and offer assistance, walking you through the complete repair process.It may take a short period of time to get a response to the log you posted because the members of our HJT Team are kept very busy. Posting your Hijack This log anywhere but in the Hijack This Logs and Analysis forum will delay their response as it will require a moderator to move the log there before the HJT Team will see it and it will fall behind other logs posted after yours was posted, so be sure to post your log in the Hijack This Logs and Analysis forum.Please be patient as this team is manned by volunteers. They will help you in order received as soon as possible.NOTEOnce you have posted your HJT log, please DO NOT make any additional posts in the HJT Logs and Analysis forum thread you created until you get a response from a member of our HJT expert team, and do not make any additional changes to your system (changes, including any attempted repairs, will make your computer to be different than as represented in the log you posted and therefore make your log inaccurate).The first criteria the HJT Team has when looking for logs that need replies are posts showing 0 replies. If you make an additional post, it will show as having had 1 reply. A team member, looking for a new log that requires help might well assume another HJT Team member is already assisting you and might not open the thread to respond. So, post your HJT Log in our HJT Forum (not here in this forum) and wait for a response from a HJT team member.After you post your log, please do not make any changes to your computer. Discontinue trying to delete anything with any program as changes will make your HJT log obsolete and waste valuable time spent by our HJT experts analyzing the log made inaccurate by changes and therefore their plan formulated to address the problems will also be obsolete.If after 5 days you still have gotten no response, then post a re-request and a link to your HJT log HERE. http://www.bleepingcomputer.com/forums/topic14717.htmlMake sure you post your HJT log in the HJT forum, not here, because if you post it here in this forum the response from our HJT Team will be delayed because the post will have to be moved before they see it and it will fall in line behind many others posted that same day.

Read other 1 answers
RELEVANCY SCORE 57.6

Hello guys...
I use dial up connection ,in the connect window
the check Box of option :<< save this user name and password for the following user users>> is inactive ,how can I active it to save my user and pass.

I search a lot but it really doesn't help me

A:Dial-up connection doesn't save user and pass

Hello,
Did you (or anyone else) found solution for this problem?
I also have dial-up connection but can't save username and password so i have to enter them every time -reason same as Nimanaqipour described

Read other 9 answers
RELEVANCY SCORE 46.4

Hi All,
I tested the following attacks in Microsoft Advanced Threat Analytics and found them
not to be working.

Bruteforce Attack Pass-The-Ticket Pass-The-Hash Sensitive account exposed Using Plain-Text Authentication
I have tested other attacks like Reconnaissance
using DNS, Broken Trust, Honey Token account suspicious activities but they are working perfectly fine. I don't know
what's the issue with the above 4.
For
1. Bruteforce Attack:
I used thc-hydra-windows and triggered a dictionary attack using a list of passwords.

2. Pass-The-Ticket:
I used mimikatz to steal the kerberos ticket from a PC on which Admin is logged on. Impersonating an attacker, I copied the .kirbi file and Injected that file(using mimikatz again) to another PC on which a domain user is logged in.

3. Pass-The-Hash:
(Same as above)
4. Sensitive account exposed in plain text authentication:
I used mimikatz command 'sekurlsa :: logonpasswords' and was able to get passwords of all the users who logged on to that PC. But this was also not detected by MATA.

Please help me with the above issues. If possible, provide the tools using which I can trigger and detect those attacks.
Regards 

Read other answers
RELEVANCY SCORE 46.4

Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.

A:Can i change windows login pass without changing microsoft pass too?

Originally Posted by xdarkmario


Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.



Don't go for a password. Use the PIN option That's just what you need and it's really a great thing as well.

Read other 4 answers
RELEVANCY SCORE 46.4

I'm getting the famous enter admin pass on boot (no BIOS update, laptop been off for a year (no OS atm) and I just started trying to fix it.  The error code I get is: [ 54549743 ] I hope that helps get my mobo unlocked!











Solved!
View Solution.

A:HP-2000 Enter Admin Pass/Power on Pass at Boot

@PoetheProgrammr? Enter    41421385 Regards, DP-K

Read other 2 answers
RELEVANCY SCORE 46

I have recently installed ATA (1.8.6645.28499). It is now in to the second week of its learning phase and it is raising a considerable number of false pass-the-hash alerts when users initiate Citrix sessions from their usual PC using pass-thru authentication,
eg a typical alert would be:
Bloggs,Fred's hash was stolen from one of the computers previously logged into by Bloggs,Fred and used from xx1234
Clearly this is spurious - in each case the user is initiating a Citrix session from their
own PC and the xx1234 represents a Citrix server in the farm in every case.
1) Why am I only receiving a handful of related PTH alerts each day when I have many thousands of Citrix users, all authenticating in the same manner?
2) How can I supress these alerts?
What I effectively want to say is 'IF the suspected PTH is being triggered BY the user on their OWN PC and the target server is in our Citrix farm' then ignore it. I can't see a way of setting an exclusion range like this for PTH events though?
Thanks

Read other answers
RELEVANCY SCORE 45.2

i have a hp touchsmart 610-1000 i forgot my power on password i need some help to get on my computer

A:i have a touchsmart 610-1000 cant get pass the power on pass...

 Hi, Attach the completed model number, for example 610-1031f How Do I Find My Model Number or Product Number?

Read other 3 answers
RELEVANCY SCORE 43.6

Hello everyone! Can you help me with a (hopefully) simple problem?
I have a Access 2003 SQL Pass-thru query that I need to prompt the user for Begin Date and End date, then put these values in the query. I read the Help, but I still don't understand HOW!
Questions: (BTW, this query is being generated from the Switchboard)
1. How do I prompt the user for the dates in Access? I can't use parameters and I don't understand how to use a prompt otyher than that.
2. How do I get those user responses into the query below
3. How do I write the querydef?

The SQL query is attached

Thanks!
Emil
 

A:Prompt&Pass value to pass-thru query

Read other 16 answers
RELEVANCY SCORE 41.6

Hi....

Thought if anything, I probably wouldnt be able to connect- go and figure - I can connect, just cant hear the darn thing connect nor a dial tone, but I'm definately connecting @ 50.7kbps....speaker selctor is switched-on in both modem and audio stages-what do i need to do to get the modem (analog/dial-up) to become audible?

Many thanks in advance
webz
 

A:analog dial-up modem works super, but I can't hear the bloody thing dial-up!

Read other 7 answers
RELEVANCY SCORE 41.6

I'm looking for a software program/script (?) to automatically dial/redial dial up 3+ differrent dial-up network connections.

Overview: My ISP has 3 dial up numbers and I would like to find a program/script that would automatically dial-up an Internet connection I have for my ISP and keep hanging up & redialing my ISP until it reaches a preset speed (for example, at least 41K-). Then (if it can't make connection on that line at a predetermined speed I selected, it would hang-up and automatically dial the next of the 3 ISP #'s I have for the same ISP (or a different ISP) and keep doing that with all 3 phone numbers (one after the other of course).

I would want it to do that over and over, automatically, until it finally reached a connection speed I preset (for example 43K). That way when I wake up, I could start the program and let it run for an hour (or however long it takes) while I get ready, until it was able to connect at target speed I preselected, which could take a long while on my voice grade line.

The phone lines are lousy around here, so I DESPERATELY need something like this. Does anyone know of any software program or any way to jimmy-rig something, fairly easily, to do that? (the point of all this is to get as good of a dial up speed as I can get where I live on my voice grade phone lines here, because there is NO Cable/DSL where I live!

Thanks For Reading This and any help would be GREATLY appreciated. (I'm not a Techie, so I have no... Read more

A:Need Software/Script or? to Automatically dial & redial, dial-up Network Connections

Southquail
Welcome to TSG!

Please do not create multiple threads for for same question. It causes confusion and mistakes to happen. If you are not getting a response in a particular forum then click the report button and have the Moderators move it for you to another forum. You can also bump you question to the top of the stack by posting again to your thread.

Closing this duplicate.

Use this thread.
http://forums.techguy.org/showthrea...threadid=118556

Dave
 

Read other 1 answers
RELEVANCY SCORE 41.6

I'm looking for a software program/script (?) to automatically dial/redial dial up 3+ differrent dial-up network connections.

Overview: My ISP has 3 dial up numbers and I would like to find a program/script that would automatically dial-up an Internet connection I have for my ISP and keep hanging up & redialing my ISP until it reaches a preset speed (for example, at least 41K-). Then (if it can't make connection on that line at a predetermined speed I selected, it would hang-up and automatically dial the next of the 3 ISP #'s I have for the same ISP (or a different ISP) and keep doing that with all 3 phone numbers (one after the other of course).

I would want it to do that over and over, automatically, until it finally reached a connection speed I preset (for example 43K). That way when I wake up, I could start the program and let it run for an hour (or however long it takes) while I get ready, until it was able to connect at target speed I preselected, which could take a long while on my voice grade line.

The phone lines are lousy around here, so I DESPERATELY need something like this. Does anyone know of any software program or any way to jimmy-rig something, fairly easily, to do that? (the point of all this is to get as good of a dial up speed as I can get where I live on my voice grade phone lines here, because there is NO Cable/DSL where I live!

Thanks For Reading This and any help would be GREATLY appreciated. (I'm not a Techie, so I have no... Read more

A:Need Software/Script or? to Automatically dial & redial, dial-up Network Connections

southquail,
Dial up networks are a strange breed. But connection speeds aren't what you're looking for. In fact, you want to know what bandwidth you have. I've seen 28k connection with a good solid bandwidth. Check your numbers and find the one that gives you the best return. I don't know of any automated scripts like that, but some programmers here might be able to help. Keep in mind, that when you hit a jump station your connection drops, and your overall connection speed is decided by the weakest link between you and your telephone number you're calling. So changing numbers changes the direction of your signal. I hope a programmer jumps in and has an automated solution for you.
 

Read other 1 answers
RELEVANCY SCORE 40.8

I removed Simple pass and validity software, and I am still required to enter the master password that simplepass asked me to set up, I uninstalled all drivers, and software, and removed all remnants from registry, and I am still required to enter the password at login, i have done the netplwiz thing,  and bios says password is clear, so how do i remove this password requirement that i didnt have before i installed simplepass.

Read other answers
RELEVANCY SCORE 40

hi there,

i connect to the internet via dial up. No, not to AOL, just an ISP you haven't heard of. Everything works fine, just that few days ago, when i started dialing, it stopped making any sounds where you can hear the number being dialled and when it connects.

Is there a way to switch the sound back on, I checked my Volume control, Line-In and they aren't on Mute. So whats the problem?? Bear in mind, everything works! just no sound like it used to do.

thanks

David
 

A:I can't hear my dial up modem dial tone

Go into dialup networking and click on the connection and see if the option is there.
 

Read other 3 answers
RELEVANCY SCORE 40

Guys,

This is something very strange, and if this is a big problem to fix, I am just going to have to reformat the hard drive and start from scratch.

I have a Gateway PC with I.E 6 with Windows 98 as my OS. I also have a DSL Internet Connection and this problem just started today.

I can play media content just fine (or, I should say....so far with Windows Media Player 7) However, when I go to this one particular website:

www.tpirtv.com which is a website devoted to the TV Gameshow, the Price is Right, I can not play any of the videos, even though I could play them fine last week. What happens is, shortly after Windows Media Player opens, my Internet-Dial Up connection appears even though I have no dial-up connection. (I run DSL) The user name is blank, the screen name is blank and it says that I am off-line (like I am using dial-up, which I am not.)

Second issue, if I open OE 6 to read my mail, the dial-up connection wizard also opens! What's going on??!!!

Jack
 

Read other answers
RELEVANCY SCORE 40

Good Evening,

I have working (according to Windows XP trouble shooter) Realtec AC'97 Audio for Via sound card except that nothing comes out of the speakers or headset. I have run all the troubleshooting panes, downloaded all the latest drivers from Realtec, reinstalled SndVol32.exe. The only sound that will play is the dial tone and connection sounds when I use a dial-up server. That plays well but you can't dance to it.

Anyone have suggestions on what else I can check and how?

Thanks in advance,

Steve
 

A:My speakers only play the dial-up dial tones

Read other 6 answers
RELEVANCY SCORE 38.8

I was connected to the internet via my dial-up server when suddenly it was disconnected.  When I tried to reconnect, my computer displays the dialing mode & I can hear the dial tone but the dial tone isn't as loud as it had been in the past.  Then at that point I was always able to hear the tone as the number was being dialed in the past when it was working properly, but now it just doesn't dial.  Can anyone there in computerland help me?  Thanks, Gary

A:Why won't my computer dial my dial-up internet ser...

I don't know for sure where the problem is but I guess I need to know a little more information because it could be 2 ways here..... One are you talking about your COMPUTER connecting to a ISP over Dial-Up ?Or from your Post it almost sounds like your computer is connected VIA Cat5 or Some other type of Network cable (Running a Client software) that then tells a Internet Network Server to Dial out to your ISP. IF this is how your connected to the Internet There are far to many problems that could be answered over a Computer Hardware Forum.  IF the issue is Just a Computer over Dial Up and your modem isn't Dialing anymore just taking the Modem off Hook but then it don't dial. I would contact your ISP and ask them to help Troubleshoot your problem. If the issue is over a Dial Up Server, You would need to make sure that your Workstation and Server are able to talk back and forth, make sure your Server is running up to par. Could be that the Server needs to be Rebooted.Also could be that From the Workstation to the Sever the right Password/ User combo is not being used that allows the user on the Workstation to access the Internet. I would Trace your failed connection and set up a full logInformation from a trace is recorded in the Miscellaneous Events view of the log. In the Trace Connections Log Options field, you can set the level of detail to record. For maximum information, choose Full Trace Information. Sorry without more information I can't really ... Read more

Read other 1 answers
RELEVANCY SCORE 38.8

My dial- up connection does not appear in the network connections window. I am trying to disable the firewall in Windows XP to play an online video game.
 

Read other answers
RELEVANCY SCORE 38.8

Hey, My notebook has a dial-up problem. Whenever I try to dial-up using any modem, it stops at "Modems Connecting". I thought it was a driver problem until I tried another modem that had always worked.

I did a bit of goggling and found others have had the problem, but I did not find a solution.

Please help!

A:Need Help. Vista Dial-up stuck, Can not dial-up

Problem solved. It seems operator assisted dialing was on. I also turned off call back.

If the problem returns i'll post an update.

Hopes this helps someone out there!

Read other 1 answers
RELEVANCY SCORE 38.8

I have Windows XP, access the internet via an ISP, 56k modem. Every 4-5 hours or so, if I have not rebooted manually, I will get disconnected from the Internet. No big deal. But then, I have more than one window opening that are all attempting to reconnect/re-dial to get me back online-all at the same time. I have to cancel this, end that...each and every time. Seems just different looking windows for the same thing. One says Dial Up Connection, another Network Connections, etc. Then I get phonebook cannot be opened, as it was already dialed. I have no idea how this all started, is just annoying more than anything, as I have to deal with all these things opening, instead of the single dial up window that opens when I first go online, or if I am getting online manually, not the computer getting it done for me.
How do I trouble shoot this problem and find out what is doing this and then stop it, so just one thing dials back up for me after a disconnect?? Will be great to not deal with this any longer. Your help is very appreciated, Thanx! parrotplay

A:Re-dial Problems After Disconnects From Dial-up

hello parrotplay, I not sure this will work ,but perhaps you could try uninstalling and reinstalling your isp software. Perhaps somewhere during the install you'll be able to clean up all those option glitches.

Read other 1 answers
RELEVANCY SCORE 38.8

DSL CONNECTIONS BEATS DIAL-UP INTERNET CONNECTIONS ( INCLUDING THE 'NEW' DIAL-UP ACCELERATED ONES) HANDS DOWN. NO CONTEST REALLY.
I have been thinking of cutting my budget and dropping a DSL internet connection and going with one of those 'new' dial-up accelerated internet connections,many times advertised as 5,6,7 times faster than regular dial-up.

does anyone have experienced with a dial-up accelerated internet connection,especially after having a DSL connection?
 

A:DIAL-UP vs DIAL-UP ACCELERATOR vs DSL CONNECTIONS

Dial-up "accellerators" simply compress all images and cache popular websites to improve your experience of dial-up, at the cost (where images are concerned) of quality.

They will not noticeably improve your download speeds.

At the end of the day, dial-up is dial-up, and you have to accept the limitations in speed. The "accellerator" services are not a magic bullet.
 

Read other 1 answers
RELEVANCY SCORE 38.8

I was connected to the internet via my dial-up server when suddenly it was disconnected.  When I tried to reconnect, my computer displays the dialing mode & I can hear the dial tone but the dial tone isn't as loud as it had been in the past.  Then at that point I was always able to hear the tone as the number was being dialed in the past when it was working properly, but now it just doesn't dial.  Can anyone there in computerland help me?  Thanks, Gary

A:Why won't my computer dial my dial-up internet ser...

I don't know for sure where the problem is but I guess I need to know a little more information because it could be 2 ways here..... One are you talking about your COMPUTER connecting to a ISP over Dial-Up ?Or from your Post it almost sounds like your computer is connected VIA Cat5 or Some other type of Network cable (Running a Client software) that then tells a Internet Network Server to Dial out to your ISP. IF this is how your connected to the Internet There are far to many problems that could be answered over a Computer Hardware Forum.  IF the issue is Just a Computer over Dial Up and your modem isn't Dialing anymore just taking the Modem off Hook but then it don't dial. I would contact your ISP and ask them to help Troubleshoot your problem. If the issue is over a Dial Up Server, You would need to make sure that your Workstation and Server are able to talk back and forth, make sure your Server is running up to par. Could be that the Server needs to be Rebooted.Also could be that From the Workstation to the Sever the right Password/ User combo is not being used that allows the user on the Workstation to access the Internet. I would Trace your failed connection and set up a full logInformation from a trace is recorded in the Miscellaneous Events view of the log. In the Trace Connections Log Options field, you can set the level of detail to record. For maximum information, choose Full Trace Information. Sorry without more information I can't really ... Read more

Read other 1 answers
RELEVANCY SCORE 32.4

Hi,
I am having difficulties to enable VNP pass-through on my DFL-800 router. Iím not very familiar with some of the technical terms such as IPSec, PPTP, and L2TP and what do they actually do. My previous router Linksys RV082 had no problems. There was one option to disable or enable VPN pass-thought and everything was simple. I have setup up a VPN connection on my Windows XP and Vista and off I went. I could connect to my work network by supplying host name www.mycompany.com and my login credentials.

When I replaced my routers and try to connect, Windows connection hangs on Authenticating User Name and Password. And then fails saying that could not connect to a network.
Obviously my router blocks some communications.

Could you please let me know how to set-up this D-Link router as I am running out of ideas.
There is too many settings in this box to play with and Iím not really sure what to touch, how and what not to.

I have tried to play with IpRules Ė trying to create some and enable IPSec, PPTP, and L2TP one at the time but none of those attempts was successful.

Iím a little pissed off at my self at this moment that I have to use my old Linksys because I canít figure out how this new box works.

Please help!!!

Cheers:

CC
 

Read other answers
RELEVANCY SCORE 32.4

Hi,
I've got a problem I'm hoping someone can help me with..

I've got a Belkin F5D8231-4 v2 N1 Wireless Router and a D-Link DSL-504G 4 Port Modem which I am trying to setup a VPN Connection through.
I'm using the built in VPN server in Windows XP Professional SP2, I can connect to the VPN internally but not externally - When trying to connect externally the client freezes up on "verifying username and password" but I dont think its even getting as far as connecting to the server.
I've opened up the ports in the firewall, and have forwarded port 1723 on TCP to the servers internal static IP address. The modem itself is running in Bridge mode to the router so I'm assuming that I don't have to open any ports or anything on that for it to work. I have contacted Belkin who assure me that a VPN can be established through that router, and weren't able to offer me much assistance.

what I've got setup is this:
modem (192.168.2.253) ---> Router (192.168.2.254) - - - - (wireless) - -> VPN Server (192.168.2.2)

I haven't actually been able to find anything that suggests that the clients are even getting through the modem and router to the server.. Any suggestions?
 

A:VPN Pass-Through

Read other 6 answers
RELEVANCY SCORE 32.4

hello,

im working on a Dell Latitude E6400 laptop and i need to do some work from home.
however, my new modem is not allowing my jobsite's vpn to pass thru so I can connect to it. How do i connect??
 

A:allow vpn to pass thru

msTHELP said:


hello,

im working on a Dell Latitude E6400 laptop and i need to do some work from home.
however, my new modem is not allowing my jobsite's vpn to pass thru so I can connect to it. How do i connect??Click to expand...

my wireless connection is in excellent connection by the way
 

Read other 2 answers
RELEVANCY SCORE 32.4

I had purchased windows 2010 and xp pro as w many other programs. PAID 4 them with my earned dollar! n my pass keys do not work! I have paid good money, alot of money, on many of their programs! Why cant I have a pass key thats allowed to work since mine doesnt??!!??
Both times ive called microsoft, all they want to do is sell me another program. My pass keys should work if I purchased them with my money!!

A:pass key

We are not agents for Microsoft...and we are not obligated nor legally capable of answering questions regarding MS policies.
 
If you have a computer problem which deals with Windows XP...and you want someone here to try to assist you...please post some details of the problem, rather than comments regarding items relating solely to Microsoft and conduct of Microsoft business.
 
Louis

Read other 4 answers
RELEVANCY SCORE 32.4

Hi
I'm not sure if this is the right place to post this but i need to install some programs for my use and the administrator has placed UAC on everything i try to install , it's not the typical UAC but the one where you have to type a password before it lets you click yes. I can't seem to do anything , like task scheduler msconfig etc.

How do i get pass this?

A:Getting Pass W7 UAC

Sorry, but you don't. You will need your network administrator.

Read other 2 answers
RELEVANCY SCORE 32

I want to run an Opteron CPU that's within the supported specs of my narra5 MN268-LA Compaq machine using OS based CPU microcodes. It?s my understanding the bios on this board will shut the system down if an unrecognized CPU is installed. Is there a way to move past that?  Be real, be sober.

Read other answers
RELEVANCY SCORE 32

How can I pass a value to a text box in php from an html submit form?
 

A:[php] How can I pass a value to a text box?

Just use, <? echo $variablename?> as the value for the textbox.
 

Read other 3 answers
RELEVANCY SCORE 32

When I set up our netlink wireless router some time in the dim past, I set it up with 128 WEP Encryption and a pass code phrase. Sometimes when I'm hooking up a computer to the network, I get the option to enter the pass phrase only, other times I have to enter the whole gazillion character wep key. How can I get it to always prompt me for the pass phrase? Soooo much easier!

Thanks.
 

A:WEP Key vs. Pass Phrase

I recommend against the pass phrase, since many times it won't yield the same key on different brands of equipment.
 

Read other 1 answers
RELEVANCY SCORE 32

Is there any way to by pass log in screen and password?.

A:By pass log in screen

Hello Tjajmg,

Sure you could. The tutorial below can help show you more on how to.

Log On User Account Automatically at Windows 8 Startup

Hope this helps,
Shawn

Read other 1 answers
RELEVANCY SCORE 32

So i'm trying to make a program that uses Caprekar's constant, but whenever i try to pass an array into a function to sort it into ascending or descending order i get the error "Unknown Type Name"
help?

Code:

#include<stdio.h>
int increase(int arr_orgn2);
int decrease(int arr_orgn1);
void main(){

int num=0; //original number
int inc=0; //number in increasing order
int dec=0; //number in decreasing order
int sort=0; //to store a number during sorting
int a=0; //used as a counter
int b=0; //used as a counter
int temp = 0;
int arr_orgn1[4]; //used to organize the numbers
int arr_orgn2[4];
int arr_skip[9]={1111,2222,3333,4444,5555,6666,7777,8888,9999}; //unacceptable numbers
int flag =1;
for (num=1000; num<9999; num++){
for(b=0;b<9;b++){//check to see if we skip this number
if (num==arr_skip[b])
num++;
}
a=num; //store variable in different number
for (b=3; b>=0; b--){
arr_orgn1[b] = a%10; //store last digit
arr_orgn2[b] = a%10;
a/=10; //remove last digit
}
printf("\nnum is %d: ", num);
dec = decrease(arr_orgn1);
inc = increase(arr_orgn2);
for(b=3; b>=0; b--){
... Read more

A:Trying to Pass array

Read other 9 answers
RELEVANCY SCORE 32

Hello,This happened to me yesterday, quote from Adware Report, [/Flooder.akeFlooder.Ake is a brand new threat that began to appear on people's computers on December 6th, 2006.The symptoms of infection are an alert window which pops up reading "threat found, trojan horse, heal now". Clicking this popup quarantines a system file, which then restarts the computer and pops up the alert again. The computer is then stuck in an infinite loop. It appears at this time that neither restoring the file from quarantine nor restoring the system using a Windows restore point will fix the computer. Only a complete reinstall of the operating system will work.This problem only seems to be impacting users of the antivirus program, AVG. Initial indications are that this not a true virus, but rather a bug in AVG that results in damage to system critical files.If you are experiencing problems associated with flooder.ake, please post any pertinent information below. If you have a screenshot that we may share with our readers, please post a URL where we may find it. Thank you!Step-by-Step Fix1. Boot your computer to Safe mode. Power on (or restart) your computer, keep pressing F8 key until the Startup menu appears and choose "Windows in Safe Mode".2. In the Windows Safe mode, navigate to following folder:C:\WINDOWS\system32\drivers\3. Rename rename the following files to avoid furhter deleting of "winlogon.exe".AVGCLEAN.SYS -> AVGCLEAN.SY_... Read more

A:I Thought I Should Pass This On!

The existence of this false positive appears to be limited to certain versions of Windows XP without Service Packs, and the problem has been quickly fixed by a new definition file. (I would like to thank members of the BC Staff and TeMerc for further researching the problem mentioned in Wink's post).In the AVG Forum, Radek Janata, a member of the Grisoft Team, responded as follows:?Unfortunately, this issue is caused by the false detection on particular version of "winlogon.exe" file. The false detection has been immediately fixed, however several users may have updated their AVG to this virus update containing this false definition. In order to solve this unpleasant issue, please proceed as follows: 1. Boot your computer to Safe mode. Power on (or restart) your computer, keep pressing F8 key until the Startup menu appears and choose "Windows in Safe Mode". 2. In the Windows Safe mode, navigate to following folder:C:\WINDOWS\system32\drivers\ 3. Rename rename the following files to avoid furhter (sic) deleting of "winlogon.exe". AVGCLEAN.SYS -> AVGCLEAN.SY_ AVGRSXP.SYS -> AVGRSXP.SY_ 4. Launch Registry Editor (regedit.exe) and remove the "__delete" value in the right pane from this key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AvgClean 5. Restart the computer back to Windows normal mode 6. Update your AVG program to latest virus base version. Launch AVG or open AVG Control Ce... Read more

Read other 8 answers
RELEVANCY SCORE 32

I get a password pop up about every 20 minutes. The pop up requests user name and pass word. The areas for the information is filled in and when I click on OK or Cancel or the X to close the box the box goes away.
Not a major problem but would like to make it go away. This just started after SBC re-set my e-mail accounts. Several attempts to get a fix from them has not worked.
 

A:Pass word pop up

Read other 6 answers
RELEVANCY SCORE 32

I've downloaded Internet Explorer 9, and I liked it, but there are two things I had them on firefox that I want them on IE 9,

1) Spell check: When I type something in a box or anywhere, if I make a spelling mistake it underline me the word and tells me it is incorrect, and gives me some options.
Specki worked, but it doesn't correct every mistake?

2) Reload every: It refreshes a page automitaclly from 0 seconds, you choose the time, I searched I found yrefresher, auto refresher, but they didn't work, any other?

Also in some sites when I type my password in IE 9 it gives a nofication if I want to save my password or no, but in some sites it doesn't?

A:IE 9 addons + pass

But with this flash blocker, it's all or nothing

In the extention it exist
IE7 pro who is free and is very complet.

Read other 1 answers
RELEVANCY SCORE 32

Ok so i bought a laptop from ebay. Before i do a system backup or install an anti virus i stupidly dl some games long story short. I need help

A:windows 7 pro will not pass log in

Hello jasonfinn , try working this tutorial to find if you have hardware or software issue. : Troubleshooting Steps for Windows 7

Read other 2 answers
RELEVANCY SCORE 32

Hey think i have a virus. Its a new laptop so i have no backup files or anti virus installrd

A:windows 7 pro will not pass log in

You have 2 threads going.. it seems.. I gave you instructions in the other one .

Read other 1 answers
RELEVANCY SCORE 32

Hey everyone...
I have a little problem and i don't know how to fix it. Today, my laptop was infected with a virus called "You Shall Not Pass" or something like that. The thing is that when i try to access a popular webpage like facebook or google, my browser displays me a image (help1.jpg). I remove the virus from the computer using malwarebytes, adwcleaner and avira. I also used Microsoft Fix It, but that did nothing. Even after restarting the laptop in safe mode and deleting the virus from there didn't helped. I also put a photo showing the window that appeared twice. Since i couldn't make a screenshot, i used my camera. The photo is called P1040104.png. I even tried to reinstall google chrome using my computer, but that didn't helped either. I still can't get rid of that annoying image!!!
Can someone help me please? Thanks in advance. If you need more information just tell me.

A:You Shall Not Pass Virus - Help

Vlad64,

A new twist on good ol' ransomware.

Let's use HitmanPro.Kickstart to access your computer, scan it for malware, and remove this infection. The program targets ransomware.

Also, you may want to print these instructions, so they are available to follow.

Now, load a USB flash drive with HitmanPro.Kickstart as follows...
(Note: the contents of the USB flash drive are erased during this process!)

Use a clean (non-infected) computer, and download:
HitmanPro.Kickstart - Anti ransomware, politievirus, bundestrojaner, Reveton, BKA, GVU - SurfRight
Under Download (on the right) select the program applicable to the system: 64-bit?

When HitmanPro opens, click the KickStart icon at the bottom of the screen.

>>Plug in the USB flash drive.

When the USB flash drive is detected, a selection screen is presented.
Select the USB flash drive from the choices, and press: Install Kickstart

A warning that all contents of the selected flash drive will erase is presented.
Press: Yes

As the HitmanPro.Kickstart files are loaded, a progress indicator is shown on the screen.
Once the process is completed a screen is presented with the contents of HitmanPro.Kickstart

Remove the USB flash drive from the clean computer and press: Close


Now, with the ransomed computer shut down, plug the USB flash drive into a USB port, and turn on the power.

When the computer starts, press the key that brings up the Boot Menu. (On some machines its F12, F10, or... Read more

Read other 1 answers
RELEVANCY SCORE 32

I am new to Java and need to pass user entered data on one JSP to another. Is there simple Java coding to do this?
 

A:How can I pass data from one JSP to another

In the JSP where you send parameters, you may have a tag for example :

<a href=http://YourServer:8080/YourWebApplication/YourMappingFolder/YourJspGettingParameters?param1=blabla1&param2=blabla2>something</a>Click to expand...
In the JSP where you receive the parameters, you may have this :

public void doGet(HttpServletRequest req, HttpServletResponse resp) throws
ServletException, IOException {
this.doPost(req, resp);
}

public void doPost(HttpServletRequest req, HttpServletResponse resp) throws
ServletException, IOException {
resp.setContentType("text/html");
ServletOutputStream out = resp.getOutputStream();

String param1 = req.getParameter("param1");
String param2 = req.getParameter("param2");
}
Click to expand...
 

Read other 1 answers
RELEVANCY SCORE 32

Hello,
Please I need your help, I have changed my login password, but when I tried to re-change it again it told me that I am writing the current password wrong.
I can’t logoff from my laptop. I am afraid that I will not beable to login to it again. By the way I am the administrator and the only account in my laptop.
Plezzzzzzzzzzzze help me
thanks

A:I don't know my pass login

Reset User Account Password

Read other 6 answers
RELEVANCY SCORE 32

Dear Community, when I try to hardreset my computer it says that it needs to be repaired. How can I fix this problem? I have an HP stream 11 from 2015.

Read other answers
RELEVANCY SCORE 32

My elder brother has put a pass & let me use the computer sometimes.While I'm in,how can I know that accounts pass?is there any app to retrieve it?I know the admin trick where cntrl+alt & twice del appears login window when we have to login as admin but there I have to change the pass of the account to gain access.I wanted a bypass way where my bro does'nt have to know.Is there any way I can put two pass in one account?Please help?I don't wanna create another account because I don't want anyone to know that I'm using the computer.Is there any way so that I can plant an app now & later while logging in I can bypass something to gain access?Any app?Plz help.

A:How to know login pass while I'm in?

We don't provide any help with lost passwords or getting around password protection. Obviously, we can't determine the real intent here, so our policy is to abstain from any assistance in these matters.

From the Tech Support Forum Rules & Conduct
Quote:




ILLEGAL ACTIVITIES

Users may not post hacks, cracks, or give instruction how to pirate any type of software, or anything similar, in any forum of TSF. We do not condone, support or give instruction on any illegal activity pertaining to computer systems, computer hardware, computer software programs or computer related activities. Included in this group of activities are requests for help to circumvent system admin passwords or Administrator settings on networks. We do understand that the majority of requests may be legitimate, but we do not have the means to discern these from non-legitimate requests.





Thread closed

Read other 2 answers
RELEVANCY SCORE 32

I AM TIRED OF THIS ISSUE! EVERY SINGLE TIME MY BROWSER UPDATES, THE SIMPLE PASS STOPS FUNCTIONING. WHY HP, WHY IN THE HELL YOU MAKE AND SELL PC'S WITH SOMETHING YOU DO NOT CARE ABOUT???? DO YOU MAYBE REALIZE THAT PEOPLE BUY THIS KIND OF PC BECAUSE OF THE FEATURE OF FINGERPRINT SCANNER???? I AM TIRED OF LOOKING FOR ANY KIND OF STUPENDOUS SOLUTIONS, DISABLINGS AND WORK AROUNDS! YOU SELL PC WITH A SCANNER, YOU SHOULD BE UPDATING TO ALL OF YOUR CUSTOMERS! FIREFOX 48 -- NOT WORKING WINDOWS IE - NOT WORKING MS EDGE - NOT WORKING CHROME - NOT WORKING WHAT GIVES????!!!!

Read other answers
RELEVANCY SCORE 32

Good afternoon.woud you happen to have the code for this: 79392989Thank you

A:g6 bios pass

Good AfternoonTry: 66090309RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 32

Cannot play NFL gamepass

Read other answers
RELEVANCY SCORE 32

I was wondering if there was a way I can pass word protect my documents folder on my desk top. I know this may sound stupid but I need to keep my document folder private.
thank you
david
 

A:pass word

go here for the how to...

http://www.pcworld.com/howto/article/0,aid,110663,00.asp
 

Read other 1 answers
RELEVANCY SCORE 32

How do I delete "movie pass"?
 

A:movie pass

Read other 10 answers